Light work with water

Recent developments, advances and strategies in heterogeneous photocatalysts for water splitting

Photocatalytic water splitting (PWS) is an up-and-coming technology for generating sustainable fuel using light energy. Significant progress has been made in the developing of PWS innovations over recent years. In addition to various water-splitting (WS) systems, the focus has primarily been on one- and two-steps-excitation WS systems. These systems utilize singular or composite photocatalysts for WS, which is a simple, feasible, and cost-effective method for efficiently converting prevalent green energy into sustainable H2 energy on a large commercial scale. The proposed principle of charge confinement and transformation should be implemented dynamically by conjugating and stimulating the photocatalytic process while ensuring no unintentional connection at the interface. This study focuses on overall water splitting (OWS) using one/two-steps excitation and various techniques. It also discusses the current advancements in the development of new light-absorbing materials and provides perspectives and approaches for isolating photoinduced charges. This article explores multiple aspects of advancement, encompassing both chemical and physical changes, environmental factors, different photocatalyst types, and distinct parameters affecting PWS. Significant factors for achieving an efficient photocatalytic process under detrimental conditions, (e.g., strong light absorption, and synthesis of structures with a nanometer scale. Future research will focus on developing novel materials, investigating potential synthesis techniques, and improving existing high-energy raw materials. The endeavors aim is to enhance the efficiency of energy conversion, the absorption of radiation, and the coherence of physiochemical processes.

Tin oxide based nanostructured materials: synthesis and potential applications

In view of their inimitable characteristics and properties, SnO₂ nanomaterials and nanocomposites have been used not only in the field of diverse advanced catalytic technologies and sensors but also in the field of energy storage such as lithium-ion batteries and supercapacitors, and in the field of energy production such as solar cells and water splitting. This review discusses the various synthesis techniques such as traditional methods, including processes like thermal decomposition, chemical vapor deposition, electrospinning, sol-gel, hydrothermal, solvothermal, and template-mediated methods and green methods, which include synthesis through plant-mediated, microbe-mediated, and biomolecule-mediated processes. Moreover, the advantages and limitations of these synthesis procedures and how to overcome them that would lead to future research are also discussed. This literature also focuses on various applications such as environmental remediation, energy production, energy storage, and removal of biological contaminants. Therefore, the rise and journey of SnO₂-based nanocomposites will motivate the modern generation of chemists to modify and design robust nanoparticles and nanocomposites that can effectively tackle significant environmental challenges. This overview concludes by providing future perspectives on research into tin oxide in synthesis and its various applications.

State of the art developments and prospects of metal-organic frameworks for energy applications

The progress on technologies for the cleaner and ecological transformation and storage of energy to combat effluence or pollution and the impending energy dilemma has recently attracted interest from energy research groups, particularly in the field of coordination chemistry, among inorganic chemists. Carriers for storing energy or facilitating mass and e^- transport are considered significant for energy conversion. Accordingly, considering their properties such as large surface area, low cost, customizable pore diameter, tunable topologies, low densities, and variable frameworks, MOFs (metal-organic frameworks) and their derivatives are well-suited for this purpose. MOFs are an innovative category of porous and crystalline materials, which have gained significant interest in recent years. Thus, herein, we highlight the state of the art progress on MOFs for energy-based applications, as perfect compounds and elements in compound assemblies for converting solar energy, lithium-ion arrays, fuel devices, hydrogen production, photocatalytic CO₂ reduction, proton conduction, etc. In addition, the substantial progress achieved in the production of various composites and derivatives containing MOFs with particular focus on supercapacitors and gas adsorption and storage is summarized, concentrating on the correlation between their coordination structural frameworks and applications in the field of energy. The current improved strategies, challenges, and future prospects are also presented in view of the coordination chemistry governing the structural modification of MOFs for energy applications.

Copper Oxide-Based Photocatalysts and Photocathodes: Fundamentals and Recent Advances

This work aims at reviewing the most impactful results obtained on the development of Cu-based photocathodes. The need of a sustainable exploitation of renewable energy sources and the parallel request of reducing pollutant emissions in airborne streams and in waters call for new technologies based on the use of efficient, abundant, low-toxicity and low-cost materials. Photoelectrochemical devices that adopts abundant element-based photoelectrodes might respond to these requests being an enabling technology for the direct use of sunlight to the production of energy fuels form water electrolysis (H2) and CO2 reduction (to alcohols, light hydrocarbons), as well as for the degradation of pollutants. This review analyses the physical chemical properties of Cu2O (and CuO) and the possible strategies to tune them (doping, lattice strain). Combining Cu with other elements in multinary oxides or in composite photoelectrodes is also discussed in detail. Finally, a short overview on the possible applications of these materials is presented.

Facile Fabrication of a Highly Crystalline and Well-Interconnected Hematite Nanoparticle Photoanode for Efficient Visible-Light-Driven Water Oxidation

Facile and scalable fabrication of α-Fe₂O₃ photoanodes using a precursor solution containing Fe^III ions and 1-ethylimidazole (EIm) in methanol was demonstrated to afford a rigidly adhered α-Fe₂O₃ film with a controllable thickness on a fluorine-doped tin oxide (FTO) substrate. EIm ligation to Fe^III ions in the precursor solution brought about high crystallinity of three-dimensionally well-interconnected nanoparticles of α-Fe₂O₃ upon sintering. This is responsible for the 13.6 times higher photocurrent density (at 1.23 V vs reference hydrogen electrode (RHE)) for photoelectrochemical (PEC) water oxidation on the α-Fe₂O₃ (w-α-Fe₂O₃) photoanode prepared with EIm compared with that (w/o-α-Fe₂O₃) prepared without EIm. The w-α-Fe₂O₃ photoanode provided the highest charge separation efficiency (η_sep) value of 27% among the state-of-the-art pristine α-Fe₂O₃ photoanodes, providing incident photon-to-current conversion efficiency (IPCE) of 13% at 420 nm and 1.23 V vs RHE. The superior η_sep for the w-α-Fe₂O₃ photoanode is attributed to the decreased recombination of the photogenerated charge carriers at the grain boundary between nanoparticles, in addition to the higher number of the catalytically active sites and the efficient bulk charge transport in the film, compared with w/o-α-Fe₂O₃.

Photosystem II-based biomimetic assembly for enhanced photosynthesis

Photosystem II (PSII) is a fascinating photosynthesis-involved enzyme, participating in sunlight-harvest, water splitting, oxygen release, and proton/electron generation and transfer. Scientists have been inspired to couple PSII with synthetic hierarchical structures via biomimetic assembly, facilitating attainment of natural photosynthesis processes, such as photocatalytic water splitting, electron transfer and ATP synthesis, in vivo. In the past decade, there has been significant progress in PSII-based biomimetic systems, such as artificial chloroplasts and photoelectrochemical cells. The biomimetic assembly approach helps PSII gather functions and properties from synthetic materials, resulting in a complex with partly natural and partly synthetic components. PSII-based biomimetic assembly offers opportunities to forward semi-biohybrid research and synchronously inspire optimization of artificial light-harvest micro/nanodevices. This review summarizes recent studies on how PSII combines with artificial structures via molecular assembly and highlights PSII-based semi-natural biosystems which arise from synthetic parts and natural components. Moreover, we discuss the challenges and remaining problems for PSII-based systems and the outlook for their development and applications. We believe this topic provides inspiration for rational designs to develop biomimetic PSII-based semi-natural devices and further reveal the secrets of energy conversion within natural photosynthesis from the molecular level.

Synthesis of tungsten oxide/ amino-functionalized sugarcane bagasse derived-carbon quantum dots (WO3/N-CQDs) composites for methylene blue removal

In this present study, the tungsten oxide/amino-functionalized sugarcane bagasse derived-carbon quantum dots (WO₃/N-CQDs) composite has successfully been prepared through a simple mixing process. The WO₃ was synthesized through a precipitation method, and CQDs were amino-functionalized using ethylenedinitrilotetraacetic acid (EDTA) and ethylenediamine (EDA) through one-pot hydrothermal method. It is revealed that N-CQDs incorporation into WO₃ alters the bandgap energy, crystallinity, surface area, and photoluminescence (PL) properties. The produced composites exhibit higher monoclinic WO₃ crystallinity, larger surface area, lower bandgap energy and quenched photoluminescence intensity. The as-prepared WO₃/N-CQDs composites exhibit better adsorption and photocatalytic degradation performance of methylene blue (MB) than the pristine WO₃. It shows that the combination of N-CQDs and WO₃ enhanced visible light absorption, by lowering the bandgap energy of WO₃ from 2.175 to 1.495 eV. The best performance composite is WO₃/N-CQDs EDA 2.5% with an efficiency of 96.86%, removal rate constant of 0.02017/min, and chemical oxidation demand (COD) removal efficiency achieved 84.61%. Moreover, the WO₃/N-CQDs EDA 2.5% shows a significant photocatalytic activity even at higher MB initial concentration with 92.93% removal for 50 ppm MB. Subsequently, the composite also has good stability after a sequential 3-times cycle of degradation with 86.85% removal. The increasing photocatalytic performance is affected by the quenching effect of PL and lower bandgap energy. The lower intensity of the PL indicates the reduced charge carrier recombination resulting in increased photocatalytic activity. The combination of N-CQDs and WO₃ resulted in improved photodegradation, which shows its significant potential to be utilized for wastewater treatment.

Carbon Sphere Template Derived Hollow Nanostructure for Photocatalysis and Gas Sensing

As a green and preferred technology for energy crisis and environmental issues, continuous research on photocatalysis and gas sensing has come forth at an explosive rate. Thus far, promising synthetic methods have enabled various designs and preparations of semiconductor-based nanostructure which have shown superior activity. This review summarized various synthetic routines toward carbon sphere template derived hollow nanostructures and their successful attempts in synthesize doping, solid solution, heterostructure, and surface modified nanostructures for heterogeneous photocatalysis and gas sensing. Moreover, the challenges and future prospects are briefly discussed. It is eagerly anticipated that this review may broaden the view and in-depth understanding of carbon sphere template derived hollow nanostructures while expected to have further progresses in heterogeneous photocatalysis, gas sensing and other related fields which will make great contributions to their application.

Surface Engineering of Nanomaterials for Photo-Electrochemical Water Splitting

Photo-electrochemical water splitting represents a green and environmentally friendly method for producing solar hydrogen. Semiconductor nanomaterials with a highly accessible surface area, reduced charge migration distance, and tunable optical and electronic property are regarded as promising electrode materials to carry out this solar-to-hydrogen process. Since most of the photo-electrochemical reactions take place on the electrode surface or near-surface region, rational engineering of the surface structures, physical properties, and chemical nature of photoelectrode materials could fundamentally change their performance. Here, the recent advances in surface engineering methods, including the modification of the nanomaterial surface morphology, crystal facet, defect and doping concentrations, as well as the deposition of a functional overlayer of sensitizers, plasmonic metallic structures, and protective and catalytic materials are highlighted. Each surface engineering method and how it affects the structural features and photo-electrochemical performance of nanomaterials are reviewed and compared. Finally, the current challenges and the opportunities in the field are discussed.

Visible-Light-Driven Overall Water Splitting Boosted by Tetrahedrally Coordinated Blende Cobalt(II) Oxide Atomic Layers

Directly splitting water into H₂ and O₂ with solar light is extremely important; however, the overall efficiency of water splitting still remains extremely low. Two types of ultrathin semiconductor layers with the same elements and the same thicknesses were designed to uncover how different atomic arrangements influence water-splitting efficiency thermodynamically and kinetically. As an example, tetrahedrally coordinated blende and octahedrally coordinated rocksalt CoO atomic layers with nearly the same thicknesses were synthesized for the first time. The blende CoO atomic layers have a smaller E_g and abundant d-d internal transition features relative to the rocksalt CoO atomic layers, which ensure enhanced visible-light harvesting ability. Density functional theory calculations reveal that the Bader charge for Co atoms in blende CoO atomic layers is larger than that of the rocksalt CoO atomic layers, which facilitates photocarrier transfer kinetics, as verified by photoluminescence spectra and time-resolved fluorescence emission decay spectra. In situ FTIR spectra and energy calculations reveal that the *OOH dissociation step is the rate-limiting step, where the blende CoO atomic layers possess a smaller *OOH dissociation energy thanks to their higher Bader charge and stronger steric effect, as confirmed by the elongated Co-OOH bonds. The blende CoO atomic layers exhibit visible-light-driven H₂ and O₂ formation rates of 4.43 and 2.63 μmol g^-1  h^-1 , roughly 3.7 times higher than those of the rocksalt CoO atomic layers.

Electrodeposition of Nickel Nanoparticles for the Alkaline Hydrogen Evolution Reaction: Correlating Electrocatalytic Behavior and Chemical Composition

Ni nanoparticles (NPs) consisting of Ni, NiO, and Ni(OH)₂ were formed on Ti substrates by electrodeposition as electrocatalysts for the hydrogen evolution reaction (HER) in alkaline solution. Additionally, the deposition parameters including the potential range and the scan rate were varied, and the resulting NPs were investigated by scanning electron microscopy and X-ray photoelectron spectroscopy. The chemical composition of the NPs changed upon using different conditions, and it was found that the catalytic activity increased with an increase in the amount of NiO. From these data, optimized NPs were synthesized; the best sample showed an onset potential of approximately 0 V and an overpotential of 197 mV at a cathodic current density of 10 mA cm^-2 as well as a small Tafel slope of 88 mV dec^-1 in 1 m KOH, values that are comparable to those of Pt foil. These NPs consist of approximately 25 % Ni and Ni(OH)₂ each, as well as approximately 50 % NiO. This implies that to obtain a successful HER electrocatalyst, active sites with differing compositions have to be close to each other to promote the different reaction steps. Long-time measurements (30 h) showed almost complete transformation of the highly active catalyst compound consisting of Ni⁰ , NiO, and Ni(OH)₂ into the less active Ni(OH)₂ phase. Nevertheless, the here-employed electrodeposition of nonprecious metal/metal-oxide combination compounds represents a promising alternative to Pt-based electrocatalysts for water reduction to hydrogen.

Self-Assembled AgNP-Containing Nanocomposites Constructed by Electrospinning as Efficient Dye Photocatalyst Materials for Wastewater Treatment

The design and self-assembly of graphene oxide (GO)-based composite membranes have attracted enormous attention due to their wide application in nanomaterial and environmental fields. In this work, we have successfully developed a strategy to fabricate new composite membranes based on poly(vinyl alcohol)/poly(acrylic acid)/carboxyl-functionalized graphene oxide modified with silver nanoparticles (PVA/PAA/GO-COOH@AgNPs), which were prepared via thermal treatment and the electrospinning technique. Due to the strong π-π forces and strong electrostatic interactions of GO-COOH sheets, the prepared composite membranes and their lager surface areas were modified by scores of AgNPs, which demonstrated that a high-efficiency photocatalyst removed the organic dyes from the aqueous solutions. The prepared PVA/PAA/GO-COOH@AgNPs nanocomposite membranes showed a remarkable photocatalytic capacity in the catalytic degradation of the methylene blue dye solutions. Most importantly, the whole process was easy, mild, and eco-friendly. Additionally, the as-prepared membranes could be repeatedly used after the catalytic reaction.

Activation of Kagome lattice-structured Cu3V2O7(OH)2·2H2O volborthite via hydrothermal crystallization for boosting visible light-driven water oxidation

A facile hydrothermal crystallization procedure for activating the photocatalytic reactivities of volborthite mineral for water oxidation and high-concentration dye removal.

Bulk and surface properties of the Ruddlesden–Popper oxynitride Sr2TaO3N

Sr₂TaO₃N(001) surface states lead to spatial electron–hole separation, rationalising the good photocatalytic activity of this Ruddlesden–Popper oxynitride.

One-Step Electrodeposition of Nanocrystalline ZnxCo3-xO4 Films with High Activity and Stability for Electrocatalytic Oxygen Evolution

The development of highly active, environmentally friendly, and long-term stable oxygen evolving catalysts at low costs is critical for efficient and scalable H₂ production from water splitting. Here, we report a new and facile one-step electrodeposition of nanocrystalline spinel-type Zn_xCo_3-xO₄ films from an alkaline Zn²⁺-Co²⁺-tartrate solution. The electrodeposited Zn_xCo_3-xO₄ electrode could be directly used as the anode for the water electrolysis without any post treatment. The Zn_xCo_3-xO₄ film shows a low and stable overpotential of ∼0.33 V at 10 mA cm^-2 (and ∼0.35 V at 20 mA cm^-2) for over 10 h and a Tafel slope of ∼39 mV dec^-1 toward the oxygen evolution reaction (OER) in 1 M NaOH, comparable to the best performance of the nonprecious OER catalysts reported for alkaline media. The enhanced OER activity of Zn_xCo_3-xO₄ compared to Co₃O₄ could be attributed to the surface structural modification and higher density of the accessible active Co³⁺ sites induced by the incorporation of Zn²⁺. The electrodeposition method in this paper could also be used to synthesize other binary and ternary metal oxide based catalytic electrodes for reactions such as the OER and oxygen reduction reaction (ORR).

Porous versus Compact Nanosized Fe(III)-Based Water Oxidation Catalyst for Photoanodes Functionalization

Integrated absorber/electrocatalyst schemes are increasingly adopted in the design of photoelectrodes for photoelectrochemical cells because they can take advantage of separately optimized components. Such schemes also lead to the emergence of novel challenges, among which parasitic light absorption and the nature of the absorber/catalyst junction features prominently. By taking advantage of the versatility of pulsed-laser deposition technique, we fabricated a porous iron(III) oxide nanoparticle-assembled coating that is both transparent to visible light and active as an electrocatalyst for water oxidation. Compared to a compact morphology, the porous catalyst used to functionalize crystalline hematite photoanodes exhibits a superior photoresponse, resulting in a drastic lowering of the photocurrent overpotential (about 200 mV) and a concomitant 5-fold increase in photocurrents at 1.23 V versus reversible hydrogen electrode. Photoelectrochemical impedance spectroscopy indicated a large increase in trapped surface hole capacitance coupled with a decreased charge transfer resistance, consistent with the possible formation of an adaptive junction between the absorber and the porous nanostructured catalyst. The observed effect is among the most prominent reported for the coupling of an electrocatalyst with a thin layer absorber.

Photocatalytic Water Splitting-The Untamed Dream: A Review of Recent Advances

Photocatalytic water splitting using sunlight is a promising technology capable of providing high energy yield without pollutant byproducts. Herein, we review various aspects of this technology including chemical reactions, physiochemical conditions and photocatalyst types such as metal oxides, sulfides, nitrides, nanocomposites, and doped materials followed by recent advances in computational modeling of photoactive materials. As the best-known catalyst for photocatalytic hydrogen and oxygen evolution, TiO₂ is discussed in a separate section, along with its challenges such as the wide band gap, large overpotential for hydrogen evolution, and rapid recombination of produced electron-hole pairs. Various approaches are addressed to overcome these shortcomings, such as doping with different elements, heterojunction catalysts, noble metal deposition, and surface modification. Development of a photocatalytic corrosion resistant, visible light absorbing, defect-tuned material with small particle size is the key to complete the sunlight to hydrogen cycle efficiently. Computational studies have opened new avenues to understand and predict the electronic density of states and band structure of advanced materials and could pave the way for the rational design of efficient photocatalysts for water splitting. Future directions are focused on developing innovative junction architectures, novel synthesis methods and optimizing the existing active materials to enhance charge transfer, visible light absorption, reducing the gas evolution overpotential and maintaining chemical and physical stability.

The Application of Graphene and Its Derivatives to Energy Conversion, Storage, and Environmental and Biosensing Devices

Graphene (GR) and its derivatives are promising materials on the horizon of nanotechnology and material science and have attracted a tremendous amount of research interest in recent years. The unique atom-thick 2D structure with sp(2) hybridization and large specific surface area, high thermal conductivity, superior electron mobility, and chemical stability have made GR and its derivatives extremely attractive components for composite materials for solar energy conversion, energy storage, environmental purification, and biosensor applications. This review gives a brief introduction of GR's unique structure, band structure engineering, physical and chemical properties, and recent energy-related progress of GR-based materials in the fields of energy conversion (e.g., photocatalysis, photoelectrochemical water splitting, CO2 reduction, dye-sensitized and organic solar cells, and photosensitizers in photovoltaic devices) and energy storage (batteries, fuel cells, and supercapacitors). The vast coverage of advancements in environmental applications of GR-based materials for photocatalytic degradation of organic pollutants, gas sensing, and removal of heavy-metal ions is presented. Additionally, the use of graphene composites in the biosensing field is discussed. We conclude the review with remarks on the challenges, prospects, and further development of GR-based materials in the exciting fields of energy, environment, and bioscience.

Engineering Interfacial Silicon Dioxide for Improved Metal-Insulator-Semiconductor Silicon Photoanode Water Splitting Performance

Silicon photoanodes protected by atomic layer deposited (ALD) TiO2 show promise as components of water splitting devices that may enable the large-scale production of solar fuels and chemicals. Minimizing the resistance of the oxide corrosion protection layer is essential for fabricating efficient devices with good fill factor. Recent literature reports have shown that the interfacial SiO2 layer, interposed between the protective ALD-TiO2 and the Si anode, acts as a tunnel oxide that limits hole conduction from the photoabsorbing substrate to the surface oxygen evolution catalyst. Herein, we report a significant reduction of bilayer resistance, achieved by forming stable, ultrathin (<1.3 nm) SiO2 layers, allowing fabrication of water splitting photoanodes with hole conductances near the maximum achievable with the given catalyst and Si substrate. Three methods for controlling the SiO2 interlayer thickness on the Si(100) surface for ALD-TiO2 protected anodes were employed: (1) TiO2 deposition directly on an HF-etched Si(100) surface, (2) TiO2 deposition after SiO2 atomic layer deposition on an HF-etched Si(100) surface, and (3) oxygen scavenging, post-TiO2 deposition to decompose the SiO2 layer using a Ti overlayer. Each of these methods provides a progressively superior means of reliably thinning the interfacial SiO2 layer, enabling the fabrication of efficient and stable water oxidation silicon anodes.

Ultrafine Cobalt Catalysts on Covalent Carbon Nitride Frameworks for Oxygenic Photosynthesis

The rational cooperation of sustainable catalysts with suitable light-harvesting semiconductors to fabricate photosynthetic device/machinery has been regarded as an ideal technique to alleviate the current worldwide energy and environmental issues. Cobalt based species (e.g., Co-Pi, Co3O4, and Co-cubene) have attracted particular attentions because they are earth-abundant, cost-acceptable, and more importantly, it shows comparable water oxidation activities to the noble metal based catalysts (e.g., RuO2, IrO2). In this contribution, we compared two general cocatalysts modification strategies, based on the surface depositing and bulk doping of ultrafine cobalt species into the sustainable graphitic carbon nitride (g-C3N4) polymer networks for oxygenic photosynthesis by splitting water into oxygen, electrons, and protons. The chemical backbone of g-C3N4 does not alter after both engineering modifications; however, in comparison with the bulk doping, the optical and electronic properties of the surface depositing samples are efficiently promoted, and the photocatalytic water oxidation activities are increased owing to much more exposed active sites, reduced overpotential for oxygen evolution and the accelerated interface charge mobility. This paper underlines the advantage of surface engineering to establish efficient advanced polymeric composites for water oxidation, and it opens new insights into the architectural design of binary hybrid photocatalysts with high reactivity and further utilizations in the fields of energy and environment.

Electric and Photoelectric Properties of 3,4-Ethylenedioxythiophene-Functionalized n-Si/PEDOT:PSS Junctions

Organic/inorganic solid-state junctions play a critical role in tandem artificial photosynthetic devices supported by conducting polymer membranes. Recent work with n-Si/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (

PEDOT

PSS) hybrid junctions has shown that the electrical behavior is dominated by the passivating groups present on the silicon surface. In this work, the photovoltaic behavior of n-Si/

PEDOT

PSS was investigated with methyl, thiophene, and 3,4-ethylenedioxythiophene (EDOT) groups covalently attached to the Si(111) surface. X-ray photoelectron spectroscopy results demonstrated that complete monolayer coverage was achieved in 3 h and that the organic passivating groups were retained over two months of exposure to ambient conditions with minimal silicon oxidation. All surfaces investigated exhibited similar light-limited photocurrents and bulk-limited open-circuit voltages, and thiophene produced a dramatic reduction of the fill factor attributed to the formation of trap states at the interface. Furthermore, shunt behavior observed near the power-producing regions for the thiophene and EDOT surfaces is indicative of increased recombination events under forward bias and suggests that hole transport across the interface is enhanced. Thus, thiophene- and EDOT-functionalized Si(111) offer similar stabilities and efficiencies to those of methylated surfaces as well as enhanced hole transport to the

PEDOT

PSS interface from the n-Si surfaces.

Generation of Hydrogen by Visible Light-Induced Water Splitting with the Use of Semiconductors and Dyes

Photosynthesis that occurs in plants involves both the oxidation of water and the reduction of carbon dioxide. Plants carry out these reactions with ease, by involving electron-transport chains. In this article, hydrogen generation by the reduction of water in the laboratory by using semiconductor nanostructures through artificial photosynthesis is examined. Dye-sensitized photochemical generation of hydrogen from water is also discussed. Hydrogen generation by these means has great technological relevance, since it is an environmentally friendly fuel. The way in which oxygen can be generated by the oxidation of water using metal oxide catalysts is also shown.

Design principles for maximizing photovoltage in metal-oxide-protected water-splitting photoanodes

Metal oxide protection layers for photoanodes may enable the development of large-scale solar fuel and solar chemical synthesis, but the poor photovoltages often reported so far will severely limit their performance. Here we report a novel observation of photovoltage loss associated with a charge extraction barrier imposed by the protection layer, and, by eliminating it, achieve photovoltages as high as 630 mV, the maximum reported so far for water-splitting silicon photoanodes. The loss mechanism is systematically probed in metal-insulator-semiconductor Schottky junction cells compared to buried junction p(+)n cells, revealing the need to maintain a characteristic hole density at the semiconductor/insulator interface. A leaky-capacitor model related to the dielectric properties of the protective oxide explains this loss, achieving excellent agreement with the data. From these findings, we formulate design principles for simultaneous optimization of built-in field, interface quality, and hole extraction to maximize the photovoltage of oxide-protected water-splitting anodes.

Enhanced photoelectrochemical performance of quantum dot-sensitized TiO2 nanotube arrays with Al2O3 overcoating by atomic layer deposition

Conformal Al₂O₃ overcoating by ALD can drastically enhance the PEC performance of quantum dot-sensitized TiO₂ nanotube arrays.

State-of-the-art Sn2+-based ternary oxides as photocatalysts for water splitting: electronic structures and optoelectronic properties

Synthesis and electronic structures for Sn²⁺-based oxide materials are reviewed in an attempt to develop visible-light-responsive photocatalysts.

A new cadmium-doped titanium–oxo cluster with stable photocatalytic H2 evolution properties

A new Cd-doped titanium–oxo cluster (TOC) with good H₂ evolution ability and high catalytic stability has been prepared and characterized.

Controlling the morphology and composition of Ag/AgBr hybrid nanostructures and enhancing their visible light induced photocatalytic properties

Ag/AgBr hybrid nanostructures were prepared by reducing AgBr nanoparticles synthesized by reaction of Ag⁺ with Br⁻. The Ag/AgBr hybrid nanostructures exhibited enhanced photocatalytic activity and recyclability for decomposing methylene blue (MB).

Covalent Attachment of Ferrocene to Silicon Microwire Arrays

A fully integrated, freestanding device for photoelectrochemical fuel generation will likely require covalent attachment of catalysts to the surface of the photoelectrodes. Ferrocene has been utilized in the past as a model system for molecular catalyst integration on planar silicon; however, the surface structure of high-aspect ratio silicon microwires envisioned for a potential device presents potential challenges with respect to stability, characterization, and mass transport. Attachment of vinylferrocene to Cl-terminated surfaces of silicon microwires was performed thermally. By varying the reaction time, solutions of vinylferrocene in di-n-butyl ether were employed to control the extent of functionalization. X-ray photoelectron spectroscopy (XPS) and electrochemistry were used to estimate the density and surface coverage of the silicon microwire arrays with ferrocenyl groups, which could be controllably varied from 1.23 × 10(-11) to 4.60 × 10(-10) mol cm(-2) or 1 to 30% of a monolayer. Subsequent backfill of the remaining Si-Cl sites with methyl groups produced ferrocenyl-terminated surfaces that showed unchanged cyclic volammograms following two months in air, under ambient conditions, and repeated electrochemical cycling.

ZnGa(2-x)In(x)S4 (0 ≤ x ≤ 0.4) and Zn(1-2y)(CuGa)(y)Ga(1.7)In(0.3)S4 (0.1 ≤ y ≤ 0.2): optimize visible light photocatalytic H2 evolution by fine modulation of band structures

Band structure engineering is an efficient technique to develop desired semiconductor photocatalysts, which was usually carried out through isovalent or aliovalent ionic substitutions. Starting from a UV-activated catalyst ZnGa2S4, we successfully exploited good visible light photocatalysts for H2 evolution by In(3+)-to-Ga(3+) and (Cu(+)/Ga(3+))-to-Zn(2+) substitutions. First, the bandgap of ZnGa2-xInxS4 (0 ≤ x ≤ 0.4) decreased from 3.36 to 3.04 eV by lowering the conduction band position. Second, Zn1-2y(CuGa)yGa1.7In0.3S4 (y = 0.1, 0.15, 0.2) provided a further and significant red-shift of the photon absorption to ∼500 nm by raising the valence band maximum and barely losing the overpotential to water reduction. Zn0.7Cu0.15Ga1.85In0.3S4 possessed the highest H2 evolution rate under pure visible light irradiation using S(2-) and SO3(2-) as sacrificial reagents (386 μmol/h/g for the noble-metal-free sample and 629 μmol/h/g for the one loaded with 0.5 wt % Ru), while the binary hosts ZnGa2S4 and ZnIn2S4 (synthesized using the same procedure) show 0 and 27.9 μmol/h/g, respectively. The optimal apparent quantum yield reached to 7.9% at 500 nm by tuning the composition to Zn0.6Cu0.2Ga1.9In0.3S4 (loaded with 0.5 wt % Ru).

Light harvesting proteins for solar fuel generation in bioengineered photoelectrochemical cells

The sun is the primary energy source of our planet and potentially can supply all societies with more than just their basic energy needs. Demand of electric energy can be satisfied with photovoltaics, however the global demand for fuels is even higher. The direct way to produce the solar fuel hydrogen is by water splitting in photoelectrochemical (PEC) cells, an artificial mimic of photosynthesis. There is currently strong resurging interest for solar fuels produced by PEC cells, but some fundamental technological problems need to be solved to make PEC water splitting an economic, competitive alternative. One of the problems is to provide a low cost, high performing water oxidizing and oxygen evolving photoanode in an environmentally benign setting. Hematite, α-Fe₂O₃, satisfies many requirements for a good PEC photoanode, but its efficiency is insufficient in its pristine form. A promising strategy for enhancing photocurrent density takes advantage of photosynthetic proteins. In this paper we give an overview of how electrode surfaces in general and hematite photoanodes in particular can be functionalized with light harvesting proteins. Specifically, we demonstrate how low-cost biomaterials such as cyanobacterial phycocyanin and enzymatically produced melanin increase the overall performance of virtually no-cost metal oxide photoanodes in a PEC system. The implementation of biomaterials changes the overall nature of the photoanode assembly in a way that aggressive alkaline electrolytes such as concentrated KOH are not required anymore. Rather, a more environmentally benign and pH neutral electrolyte can be used.

A first-principles examination of conducting monolayer 1T′-MX2(M = Mo, W; X = S, Se, Te): promising catalysts for hydrogen evolution reaction and its enhancement by strain

We investigated the application of 1T′-MX₂(M = Mo, W; X = S, Se, Te) 2D materials as hydrogen evolution reaction (HER) catalysts using density functional theory.

Synthesis and use of “clickable” bay-region tetrasubstituted perylene tetracarboxylic tetraesters and a perylene monoimide diester as energy acceptors

Novel perylene derivatives are ready to be used as functional energy acceptors in light-harvesting systems.