Detecting protein analytes that modulate transmembrane movement of a polymer chain within a single protein pore

Pulley Effect in the Capture of DNA Translocation through Solid-State Nanopores

Nanopores are powerful single-molecule sensors for analyzing biomolecules such as DNA and proteins. Understanding the dynamics of DNA capture and translocation through nanopores is essential for optimizing their performance. In this study, we examine the effects of applied voltage and pore diameter on current blockage, translocation time, collision, and capture location by translocating λ-DNA through 5.7 and 16 nm solid-state nanopores. Ionic current changes are used to infer DNA conformations during translocation. We find that translocation time increases with pore diameter, which can be attributed to the decrease of the stall force. Linear and exponential decreases of collision frequency with voltage are observed in the 16 and 5.7 nm pores, respectively, indicating a free energy barrier in the small pore. Moreover, the results reveal a voltage-dependent bias in the capture location toward the DNA ends, which is explained by a "pulley effect" deforming the DNA as it approaches the pore. This study provides insights into the physics governing DNA capture and translocation, which can be useful for promoting single-file translocation to enhance nanopore sensing.

Nanopore DNA sequencing technologies and their applications towards single-molecule proteomics

Sequencing of nucleic acids with nanopores has emerged as a powerful tool offering rapid readout, high accuracy, low cost and portability. This label-free method for sequencing at the single-molecule level is an achievement on its own. However, nanopores also show promise for the technologically even more challenging sequencing of polypeptides, something that could considerably benefit biological discovery, clinical diagnostics and homeland security, as current techniques lack portability and speed. Here we survey the biochemical innovations underpinning commercial and academic nanopore DNA/RNA sequencing techniques, and explore how these advances can fuel developments in future protein sequencing with nanopores.

Unfolding of protein using MoS2/SnS2heterostructure for nanopore-based sequencing

Protein sequencing is crucial for understanding the complex mechanisms driving biological functions. However, proteins are usually folded in their native state and the mechanism of fast protein conformation transitions still remains unclear, which make protein sequencing challenging. Molecular dynamics simulations with accurate force field are now able to observe the entire folding/unfolding process, providing valuable insights into protein folding mechanisms. Given that proteins can be unfolded, nanopore technology shows great potential for protein sequencing. In this study, we proposed to use MoS2/SnS2heterostructures to firstly unfold proteins and then detect them by a nanopore in the heterostructural membrane. All-atom molecular dynamics simulations performed in this work provided rich atomic-level information for a comprehensive understanding of protein unfolding process and mechanism on the MoS2/SnS2heterostructure, it was found that the strong binding of protein to SnS2nanostripe and hydrogen bond breaking were the main reasons for unfolding the protein on the heterostructure. After the protein was fully unfolded, it was restrained on the nanostripe because of the affinity of protein to the SnS2nanostripe. Thus by integrating the proposed unfolding technique with nanopore technology, detection of linear unfolded peptide was realized in this work, allowing for the identification of protein components, which is essential for sequencing proteins in the near future.

Functional Nanopores Enabled with DNA

Membrane-spanning nanopores are used in label-free single-molecule sensing and next-generation portable nucleic acid sequencing, and as powerful research tools in biology, biophysics, and synthetic biology. Naturally occurring protein and peptide pores, as well as synthetic inorganic nanopores, are used in these applications, with their limitations. The structural and functional repertoire of nanopores can be considerably expanded by functionalising existing pores with DNA strands and by creating an entirely new class of nanopores with DNA nanotechnology. This review outlines progress in this area of functional DNA nanopores and outlines developments to open up new applications.

Molecular Recognition in Confined Space Elucidated with DNA Nanopores and Single-Molecule Force Microscopy

The binding of ligands to receptors within a nanoscale small space is relevant in biology, biosensing, and affinity filtration. Binding in confinement can be studied with biological systems but under the limitation that essential parameters cannot be easily controlled including receptor type and position within the confinement and its dimensions. Here we study molecular recognition with a synthetic confined nanopore with controllable pore dimension and molecular DNA receptors at different depth positions within the channel. Binding of a complementary DNA strand is studied at the single-molecule level with atomic force microscopy. Following the analysis, kinetic association rates are lower for receptors positioned deeper inside the pore lumen while dissociation is faster and requires less force. The phenomena are explained by the steric constraints on molecular interactions in confinement. Our study is the first to explore recognition in DNA nanostructures with atomic force microscopy and lays out new tools to further quantify the effect of nanoconfinement on molecular interactions.

Nanopore-based technologies beyond DNA sequencing

Inspired by the biological processes of molecular recognition and transportation across membranes, nanopore techniques have evolved in recent decades as ultrasensitive analytical tools for individual molecules. In particular, nanopore-based single-molecule DNA/RNA sequencing has advanced genomic and transcriptomic research due to the portability, lower costs and long reads of these methods. Nanopore applications, however, extend far beyond nucleic acid sequencing. In this Review, we present an overview of the broad applications of nanopores in molecular sensing and sequencing, chemical catalysis and biophysical characterization. We highlight the prospects of applying nanopores for single-protein analysis and sequencing, single-molecule covalent chemistry, clinical sensing applications for single-molecule liquid biopsy, and the use of synthetic biomimetic nanopores as experimental models for natural systems. We suggest that nanopore technologies will continue to be explored to address a number of scientific challenges as control over pore design improves.

PlyAB Nanopores Detect Single Amino Acid Differences in Folded Haemoglobin from Blood

The real‐time identification of protein biomarkers is crucial for the development of point‐of‐care and portable devices. Here, we use a PlyAB biological nanopore to detect haemoglobin (Hb) variants. Adult haemoglobin (HbA) and sickle cell anaemia haemoglobin (HbS), which differ by just one amino acid, were distinguished in a mixture with more than 97 % accuracy based on individual blockades. Foetal Hb, which shows a larger sequence variation, was distinguished with near 100 % accuracy. Continuum and Brownian dynamics simulations revealed that Hb occupies two energy minima, one near the inner constriction and one at the trans entry of the nanopore. Thermal fluctuations, the charge of the protein, and the external bias influence the dynamics of Hb within the nanopore, which in turn generates the unique ionic current signal in the Hb variants. Finally, Hb was counted from blood samples, demonstrating that direct discrimination and quantification of Hb from blood using nanopores, is feasible.

Quantification of Protein Glycosylation Using Nanopores

Although nanopores can be used for single-molecule sequencing of nucleic acids using low-cost portable devices, the characterization of proteins and their modifications has yet to be established. Here, we show that hydrophilic or glycosylated peptides translocate too quickly across FraC nanopores to be recognized. However, high ionic strengths (i.e., 3 M LiCl) and low pH (i.e., pH 3) together with using a nanopore with a phenylalanine at its constriction allows the recognition of hydrophilic peptides, and to distinguish between mono- and diglycosylated peptides. Using these conditions, we devise a nanopore method to detect, characterize, and quantify post-translational modifications in generic proteins, which is one of the pressing challenges in proteomic analysis.

Highly shape- and size-tunable membrane nanopores made with DNA

Membrane nanopores are key for molecular transport in biology, portable DNA sequencing^1-4, label-free single-molecule analysis^5-14 and nanomedicine⁵. Transport traditionally relies on barrel-like channels of a few nanometres width, but there is considerable scientific and technological interest for much wider structures of tunable shape. Yet, these nanopores do not exist in nature and are challenging to build using existing de novo routes for proteins^10,15-17. Here, we show that rational design with DNA can drastically expand the structural and functional range of membrane nanopores. Our design strategy bundles DNA duplexes into pore subunits that modularly arrange to form tunable pore shapes and lumen widths of up to tens of nanometres. Functional units for recognition or signalling can be optionally attached. By dialling in essential parameters, we demonstrate the utility and potential of the custom-engineered nanopores by electrical direct single-molecule sensing of 10-nm-sized proteins using widely used research and hand-held analysis devices. The designer nanopores illustrate how DNA nanotechnology can deliver functional biomolecular structures to be used in synthetic biology, single-molecule enzymology and biophysical analysis, as well as portable diagnostics and environmental screening.

Interplay of Affinity and Surface Tethering in Protein Recognition

Surface-tethered ligand-receptor complexes are key components in biological signaling and adhesion. They also find increasing utility in single-molecule assays and biotechnological applications. Here, we study the real-time binding kinetics between various surface-immobilized peptide ligands and their unrestrained receptors. A long peptide tether increases the association of ligand-receptor complexes, experimentally proving the fly casting mechanism where the disorder accelerates protein recognition. On the other hand, a short peptide tether enhances the complex dissociation. Notably, the rate constants measured for the same receptor, but under different spatial constraints, are strongly correlated to one another. Furthermore, this correlation can be used to predict how surface tethering on a ligand-receptor complex alters its binding kinetics. Our results have immediate implications in the broad areas of biomolecular recognition, intrinsically disordered proteins, and biosensor technology.

Non-binary Encoded Nucleic Acid Barcodes Directly Readable by a Nanopore

A large collection of unique molecular barcodes is useful in the simultaneous sensing or screening of molecular analytes. Though the sequence of DNA has been widely applied to encode for molecular barcodes, decoding of these barcodes is normally assisted by sequencing. We here demonstrate a barcode system based solely on self-assembly of synthetic nucleic acids and direct nanopore decoding. Each molecular barcode is composed of "n" distinct information nodes in a non-binary manner and can be sequentially scanned and decoded by a Mycobacterium smegmatis porin A (MspA) nanopore. Nanopore events containing step-shaped features were consistently reported. 14 unique information nodes were developed which in principle could encode for 14ⁿ unique molecular barcodes in a barcode containing "n" information nodes. These barcode probes were adapted to detect different antibody proteins or cancer-related microRNAs, suggesting their immediate application in a wide variety of sensing applications.

The application of single molecule nanopore sensing for quantitative analysis

Nanopore-based sensors typically work by monitoring transient pulses in conductance via current-time traces as molecules translocate through the nanopore. The unique property of being able to monitor single molecules gives nanopore sensors the potential as quantitative sensors based on the counting of single molecules. This review provides an overview of the concepts and fabrication of nanopore sensors as well as nanopore sensing with a view toward using nanopore sensors for quantitative analysis. We first introduce the classification of nanopores and highlight their applications in molecular identification with some pioneering studies. The review then shifts focus to recent strategies to extend nanopore sensors to devices that can rapidly and accurately quantify the amount of an analyte of interest. Finally, future prospects are provided and briefly discussed. The aim of this review is to aid in understanding recent advances, challenges, and prospects for nanopore sensors for quantitative analysis.

Nanodevices for Biological and Medical Applications: Development of Single-Molecule Electrical Measurement Method

A comprehensive detection of a wide variety of diagnostic markers is required for the realization of personalized medicine. As a sensor to realize such personalized medicine, a single molecule electrical measurement method using nanodevices is currently attracting interest for its comprehensive simultaneous detection of various target markers for use in biological and medical application. Single-molecule electrical measurement using nanodevices, such as nanopore, nanogap, or nanopipette devices, has the following features:; high sensitivity, low-cost, high-throughput detection, easy-portability, low-cost availability by mass production technologies, and the possibility of integration of various functions and multiple sensors. In this review, I focus on the medical applications of single- molecule electrical measurement using nanodevices. This review provides information on the current status and future prospects of nanodevice-based single-molecule electrical measurement technology, which is making a full-scale contribution to realizing personalized medicine in the future. Future prospects include some discussion on of the current issues on the expansion of the application requirements for single-mole-cule measurement.

Probing Protein Nanopores with Poly(ethylene glycol)s

Neutral water-soluble poly(ethylene glycol)s (PEGs) have been extensively explored in protein nanopore research for the past several decades. The principal use of PEGs is to investigate the membrane protein ion channel physical characteristics and transport properties. In addition, protein nanopores are used to study polymer-protein interactions and polymer physicochemical properties. In this review, we focus on the biophysical studies on probing protein ion channels with PEGs, specifically on nanopore sizing by PEG partitioning. We discuss the fluctuation analysis of ion channel currents in response to the PEGs moving within their confined geometries. The advantages, limitations, and recent developments of the approach are also addressed. This article is protected by copyright. All rights reserved.

Protein identification by nanopore peptide profiling

Nanopores are single-molecule sensors used in nucleic acid analysis, whereas their applicability towards full protein identification has yet to be demonstrated. Here, we show that an engineered Fragaceatoxin C nanopore is capable of identifying individual proteins by measuring peptide spectra that are produced from hydrolyzed proteins. Using model proteins, we show that the spectra resulting from nanopore experiments and mass spectrometry share similar profiles, hence allowing protein fingerprinting. The intensity of individual peaks provides information on the concentration of individual peptides, indicating that this approach is quantitative. Our work shows the potential of a low-cost, portable nanopore-based analyzer for protein identification.

Peptide mass fingerprinting is a traditional approach for protein identification by mass spectrometry. Here, the authors provide evidence that peptide mass fingerprinting is also feasible using FraC nanopores, demonstrating protein identification based on nanopore measurements of digested peptides.

Herding cats: Label-based approaches in protein translocation through nanopore sensors for single-molecule protein sequence analysis

Proteins carry out life's essential functions. Comprehensive proteome analysis technologies are thus required for a full understanding of the operating principles of biological systems. While current proteomics techniques suffer from limitations in sensitivity and/or throughput, nanopore technology has the potential to enable de novo protein identification through single-molecule sequencing. However, a significant barrier to achieving this goal is controlling protein/peptide translocation through the nanopore sensor for processive strand analysis. Here, we review recent approaches that use a range of techniques, from oligonucleotide conjugation to molecular motors, aimed at driving protein strands and peptides through protein nanopores. We further discuss site-specific protein conjugation chemistry that could be combined with these translocation approaches as future directions to achieve single-molecule protein detection and sequencing of native proteins.

Systemic Overview of Microstrip Patch Antenna's for Different Biomedical Applications

Timely diagnosis is the most important parameter for the detection and hindrance with tissues (infected). Many conventional techniques are used for the determination of the chronic disease like MRI, X-ray, mammography, ultrasound and other diagnosing methods. Nevertheless, they have some limitations. We epitomize between 4 and 34 % of all carcinogenic tissues are lacking because of weak, in adequate malignant/benign cancer tissue on the contrary. So, an effective alternative method is the valid concern in the field of medical right now. Imaging with the help of patch antenna to detect chronic disease like breast cancer, oxidative stress syndrome etc. it has been proved to be a suitable potential method, and there are many works in this area. All materials have different conductivity and permittivity. With the help of these antennas, a 3D tissue structure which has different conductivity and permittivity is modelled in high-frequency structure simulator through finite element method which resolves electromagnetic field values and a microstrip patch antenna operation process. As compared with conventional antennas, micro strip patch antennas have enhanced benefits and better prospects. An integrated Antenna plays an important or crucial role for supporting many applications in biomedical, commercial and in military fields. The Antenna designed for these applications should be wideband, not sensitive to the human body. In this present review, the precise application of the Antenna in different biomedical aspects is considered. Furthermore, the author has also discussed the analytical results using simulation models and experimental results for some of the significantdisease.

Nanopore sensing: A physical-chemical approach

Protein nanopores have emerged as an important class of sensors for the understanding of biophysical processes, such as molecular transport across membranes, and for the detection and characterization of biopolymers. Here, we trace the development of these sensors from the Coulter counter and squid axon studies to the modern applications including exquisite detection of small volume changes and molecular reactions at the single molecule (or reactant) scale. This review focuses on the chemistry of biological pores, and how that influences the physical chemistry of molecular detection.

Recent advances in biological nanopores for nanopore sequencing, sensing and comparison of functional variations in MspA mutants

Biological nanopores are revolutionizing human health by the great myriad of detection and diagnostic skills. Their nano-confined area and ingenious shape are suitable to investigate a diverse range of molecules that were difficult to identify with the previous techniques. Additionally, high throughput and label-free detection of target analytes instigated the exploration of new bacterial channel proteins such as Fragaceatoxin C (FraC), Cytolysin A (ClyA), Ferric hydroxamate uptake component A (FhuA) and Curli specific gene G (CsgG) along with the former ones, like α-hemolysin (αHL), Mycobacterium smegmatis porin A (MspA), aerolysin, bacteriophage phi 29 and Outer membrane porin G (OmpG). Herein, we discuss some well-known biological nanopores but emphasize on MspA and compare the effects of site-directed mutagenesis on the detection ability of its mutants in view of the surface charge distribution, voltage threshold and pore-analyte interaction. We also discuss illustrious and latest advances in biological nanopores for past 2-3 years due to limited space. Last but not the least, we elucidate our perspective for selecting a biological nanopore and propose some future directions to design a customized nanopore that would be suitable for DNA sequencing and sensing of other nontrivial molecules in question.

Nanopore Technology for the Application of Protein Detection

Protein is an important component of all the cells and tissues of the human body and is the material basis of life. Its content, sequence, and spatial structure have a great impact on proteomics and human biology. It can reflect the important information of normal or pathophysiological processes and promote the development of new diagnoses and treatment methods. However, the current techniques of proteomics for protein analysis are limited by chemical modifications, large sample sizes, or cumbersome operations. Solving this problem requires overcoming huge challenges. Nanopore single molecule detection technology overcomes this shortcoming. As a new sensing technology, it has the advantages of no labeling, high sensitivity, fast detection speed, real-time monitoring, and simple operation. It is widely used in gene sequencing, detection of peptides and proteins, markers and microorganisms, and other biomolecules and metal ions. Therefore, based on the advantages of novel nanopore single-molecule detection technology, its application to protein sequence detection and structure recognition has also been proposed and developed. In this paper, the application of nanopore single-molecule detection technology in protein detection in recent years is reviewed, and its development prospect is investigated.

Nanodiagnostics: A review of the medical capabilities of nanopores

Modern diagnostics strive to be accurate, fast, and inexpensive in addition to properly identifying the presence of a disease, infection, or illness. Early diagnosis is key; catching a disease in its early stages can be the difference between fatality and treatment. The challenge with many diseases is that detectability of the disease scales with disease progression. Since single molecule sensors, e.g., nanopores, can sense biomolecules at low concentrations, they have the potential to become clinically relevant in many of today's medical settings. With nanopore-based sensing, lower volumes and concentrations are required for detection, enabling it to be clinically beneficial. Other advantages to using nanopores include that they are tunable to an enormous variety of molecules and boast low costs, and fabrication is scalable for manufacturing. We discuss previous reports and the potential for incorporating nanopores into the medical field for early diagnostics, therapeutic monitoring, and identifying relapse/recurrence.

The Manipulation of the Internal Hydrophobicity of FraC Nanopores Augments Peptide Capture and Recognition

The detection of analytes and the sequencing of DNA using biological nanopores have seen major advances over recent years. The analysis of proteins and peptides with nanopores, however, is complicated by the complex physicochemical structure of polypeptides and the lack of understanding of the mechanism of capture and recognition of polypeptides by nanopores. In this work, we show that introducing aromatic amino acids at precise positions within the lumen of α-helical fragaceatoxin C (FraC) nanopores increased the capture frequency of peptides and largely improved the discrimination among peptides of similar size. Molecular dynamics simulations determined the sensing region of the nanopore, elucidated the microscopic mechanism enabling accurate characterization of the peptides via ionic current blockades in FraC, and characterized the effect of the pore modification on peptide discrimination. This work provides insights to improve the recognition and to augment the capture of peptides by nanopores, which is important for developing a real-time and single-molecule size analyzer for peptide recognition and identification.

Nonspecific Binding-Fundamental Concepts and Consequences for Biosensing Applications

Nature achieves differentiation of specific and nonspecific binding in molecular interactions through precise control of biomolecules in space and time. Artificial systems such as biosensors that rely on distinguishing specific molecular binding events in a sea of nonspecific interactions have struggled to overcome this issue. Despite the numerous technological advancements in biosensor technologies, nonspecific binding has remained a critical bottleneck due to the lack of a fundamental understanding of the phenomenon. To date, the identity, cause, and influence of nonspecific binding remain topics of debate within the scientific community. In this review, we discuss the evolution of the concept of nonspecific binding over the past five decades based upon the thermodynamic, intermolecular, and structural perspectives to provide classification frameworks for biomolecular interactions. Further, we introduce various theoretical models that predict the expected behavior of biosensors in physiologically relevant environments to calculate the theoretical detection limit and to optimize sensor performance. We conclude by discussing existing practical approaches to tackle the nonspecific binding challenge in vitro for biosensing platforms and how we can both address and harness nonspecific interactions for in vivo systems.

Tuning Protein Discrimination Through Altering the Sampling Interface Formed between the Analyte and the OmpG Nanopore

Nanopore sensors capable of distinguishing homologous protein analytes are highly desirable tools for proteomics research and disease diagnostics. Recently, an engineered outer membrane protein G (OmpG) nanopore with a high-affinity ligand attached to a gating loop 6 showed specificity for distinguishing homologous proteins in complex mixtures. Here, we report the development of OmpG nanopores with the other six loops used as the anchoring point to host an affinity ligand for protein sensing. We investigated how the analyte binding to the affinity ligand located at different loops affects the detection sensitivity, selectivity, and specificity. Our results reveal that analytes weakly attracted to the OmpG nanopore surface are only detectable when the ligand is tethered to loop 6. In contrast, protein analytes that form a strong interaction with the OmpG surface via electrostatic attractions are distinguishable by all seven OmpG nanopore constructs. In addition, the same analyte can generate distinct binding signals with different OmpG nanopore constructs. The ability to exploit all seven OmpG loops will aid the design of a new generation of OmpG sensors with increased sensitivity, selectivity, and specificity for biomarker sensing.

Insertion state of modular protein nanopores into a membrane

In the past decade, significant progress has been made in the development of new protein nanopores. Despite these advancements, there is a pressing need for the creation of nanopores equipped with relatively large functional groups for the sampling of biomolecular events on their extramembranous side. Here, we designed, produced, and analyzed protein nanopores encompassing a robust truncation of a monomeric β-barrel membrane protein. An exogenous stably folded protein was anchored within the aqueous phase via a flexible peptide tether of varying length. We have extensively examined the pore-forming properties of these modular protein nanopores using protein engineering and single-molecule electrophysiology. This study revealed distinctions in the nanopore conductance and current fluctuations that arose from tethering the exogenous protein to either the N terminus or the C terminus. Remarkably, these nanopores insert into a planar lipid membrane with one specific conductance among a set of three substate conductance values. Moreover, we demonstrate that the occurrence probabilities of these insertion substates depend on the length of the peptide tether, the orientation of the exogenous protein with respect to the nanopore opening, and the molecular mass of tethered protein. In addition, the three conductance values remain unaltered by major changes in the composition of modular nanopores. The outcomes of this work serve as a platform for further developments in areas of protein engineering of transmembrane pores and biosensor technology.

Single Nucleotides Moving through Nanoslits Composed of Self-Assembled Monolayers via Equilibrium and Nonequilibrium Molecular Dynamics

Nonequilibrium molecular dynamics (MD) simulations were used to study the effect of three chemical surface groups on the separation of DNA mononucleotide velocity (or time-of-flight) distributions as they pass through nanoslits. We used nanoslits functionalize with self-assembled monolayers (SAMs) since they have relatively smooth surfaces. The SAM molecules were terminated with either a methyl, methylformyl, or phenoxy group, and the nucleotides were driven electrophoretically with an electric field intensity of 0.1 V/nm in slits about 3 nm wide. Although these large driving forces are physically difficult to achieve experimentally, the simulations are still of great value as they provide molecular level insight into nucleotide translocation events and allow comparison of different surfaces. Nucleotides adsorbed and desorbed from the slit surface multiple times during the simulations. The required slit length for 99% accuracy in identifying the deoxynucleotide monophosphates (dNMPs), based on the separation of the distributions of time of flight, was used to compare the surfaces with shorter lengths indicating more efficient separation. The lengths were 6.5 μm for phenoxy-terminated SAMs, 270 μm for methylformyl-terminated SAMs, and 2400 μm for methyl-terminated SAMs. Our study showed that a slit with a section with methyl termination and the second section with methylformyl termination lead to a required length of 120 μm, which was significantly lower than for only a methylformyl- or methyl-terminated surface.

Biological Nanopores: Engineering on Demand

Nanopore-based sensing is a powerful technique for the detection of diverse organic and inorganic molecules, long-read sequencing of nucleic acids, and single-molecule analyses of enzymatic reactions. Selected from natural sources, protein-based nanopores enable rapid, label-free detection of analytes. Furthermore, these proteins are easy to produce, form pores with defined sizes, and can be easily manipulated with standard molecular biology techniques. The range of possible analytes can be extended by using externally added adapter molecules. Here, we provide an overview of current nanopore applications with a focus on engineering strategies and solutions.

Preparation of Cytolysin A (ClyA) Nanopores

The ionic currents passing through nanopores can be used to sequence DNA and identify molecules at the single-molecule level. Recently, researchers have started using nanopores for the detection and analysis of proteins, providing a new platform for single-molecule enzymology studies and more efficient biomolecular sensing applications. For this approach, the homo-oligomeric Cytolysin A (ClyA) nanopore has been demonstrated as a powerful tool. Here, we describe a simple protocol allowing the production of ClyA nanopores. Monomers of ClyA are expressed in Escherichia coli and oligomerized in the presence of detergent. Subsequently, different oligomer variants are electrophoretically resolved and stored in a gel matrix for long-term use.

Protein Ligand-Induced Amplification in the 1/f Noise of a Protein-Selective Nanopore

Previous studies of transmembrane protein channels have employed noise analysis to examine their statistical current fluctuations. In general, these explorations determined a substrate-induced amplification in the Gaussian white noise of these systems at a low-frequency regime. This outcome implies a lack of slowly appearing fluctuations in the number and local mobility of diffusing charges in the presence of channel substrates. Such parameters are among the key factors in generating a low-frequency 1/f noise. Here, we show that a protein-selective biological nanopore exhibits a substrate-induced amplification in the 1/f noise. The modular composition of this biological nanopore includes a hydrophilic transmembrane protein pore fused to a water-soluble binding protein on its extramembranous side. In addition, this protein nanopore shows an open substate populated by a high-frequency current noise because of the flickering of an engineered polypeptide adaptor at the tip of the pore. However, the physical association of the protein ligand with the binding domain reversibly switches the protein nanopore from a high-frequency noise substate into a quiet substate. In the absence of the protein ligand, our nanopore shows a low-frequency white noise. Remarkably, in the presence of the protein ligand, an amplified low-frequency 1/f noise was detected in a ligand concentration-dependent fashion. This finding suggests slowly occurring equilibrium fluctuations in the density and local mobility of charge carriers under these conditions. Furthermore, we report that the excess in 1/f noise is generated by reversible switches between the noisy ligand-released substate and the quiet ligand-captured substate. Finally, quantitative aspects of the low-frequency 1/f noise are in accord with theoretical predictions of the current noise analysis of protein channel-ligand interactions.

Gold nanotubes: synthesis, properties and biomedical applications

This review (with 106 references) summarizes the latest progress in the synthesis, properties and biomedical applications of gold nanotubes (AuNTs). Following an introduction into the field, a first large section covers two popular AuNTs synthesis methods. The hard template method introduces anodic alumina oxide template (AAO) and track-etched membranes (TeMs), while the sacrificial template method based on galvanic replacement introduces bimetallic, trimetallic AuNTs and AuNT-semiconductor hybrid materials. Then, the factors affecting the morphology of AuNTs are discussed. The next section covers their unique surface plasmon resonance (SPR), surface-enhanced Raman scattering (SERS) and their catalytic properties. This is followed by overviews on the applications of AuNTs in biosensors, protein transportation, photothermal therapy and imaging. Several tables are presented that give an overview on the wealth of synthetic methods, morphology factors and biological application. A concluding section summarizes the current status, addresses current challenges and gives an outlook on potential applications of AuNTs in biochemical detection and drug delivery.Graphical abstract.

Nanopore Enzymology to Study Protein Kinases and Their Inhibition by Small Molecules

Nanopore enzymology is a powerful single-molecule technique for the label-free study of enzymes using engineered protein nanopore sensors. The technique has been applied to protein kinases, where it has enabled the full repertoire of kinase function to be observed, including: kinetics of substrate binding and dissociation, product binding and dissociation, nucleotide binding, and reversible phosphorylation. Further, minor modifications enable the screening of type I kinase inhibitors and the determination of inhibition constants in a facile and label-free manner. Here, we describe the design and production of suitably engineered protein nanopores and their use for the determination of key mechanistic parameters of kinases. We also provide procedures for the determination of inhibition constants of protein kinase inhibitors.

Detection of Circulating Tumor Cells in Breast Cancer Patients by Nanopore Sensing with Aptamer-Mediated Amplification

Circulating tumor cells (CTCs) have been utilized in the diagnosis and prognosis of tumor. However, the CTC concentration is extremely low to be detected in peripheral blood. Many existing methods suffer from either expensive labeling or complex operation. In this study, we constructed a label- and enzyme-free and sensitive method to detect the breast cancer CTCs. First of all, a probe containing a breast cancer cell-specific aptamer and a complementary single-stranded DNA (trigger DNA P1) were designed. When the target cells are present, the aptamer binds to the CTCs and releases P1 which triggers the strand displacement amplification. This process generates three-way junction structure DNA, the specific translocation signals of which are identified by nanopore assay. The detection limit of tumor cells is 5 in the current experimental setup and can be further reduced. Furthermore, the method is demonstrated in a clinical sample test with high recovery rate and accuracy. Our results suggest that this method could be applied to early diagnosis of metastatic recurrence and prognosis determination.

Critical Review: digital resolution biomolecular sensing for diagnostics and life science research

One of the frontiers in the field of biosensors is the ability to quantify specific target molecules with enough precision to count individual units in a test sample, and to observe the characteristics of individual biomolecular interactions. Technologies that enable observation of molecules with "digital precision" have applications for in vitro diagnostics with ultra-sensitive limits of detection, characterization of biomolecular binding kinetics with a greater degree of precision, and gaining deeper insights into biological processes through quantification of molecules in complex specimens that would otherwise be unobservable. In this review, we seek to capture the current state-of-the-art in the field of digital resolution biosensing. We describe the capabilities of commercially available technology platforms, as well as capabilities that have been described in published literature. We highlight approaches that utilize enzymatic amplification, nanoparticle tags, chemical tags, as well as label-free biosensing methods.

Electro-Osmotic Vortices Promote the Capture of Folded Proteins by PlyAB Nanopores

Biological nanopores are emerging as powerful tools for single-molecule analysis and sequencing. Here, we engineered the two-component pleurotolysin (PlyAB) toxin to assemble into 7.2 × 10.5 nm cylindrical nanopores with a low level of electrical noise in lipid bilayers, and we addressed the nanofluidic properties of the nanopore by continuum simulations. Surprisingly, proteins such as human albumin (66.5 kDa) and human transferrin (76-81 kDa) did not enter the nanopore. We found that the precise engineering of the inner surface charge of the PlyAB induced electro-osmotic vortices that allowed the electrophoretic capture of the proteins. Once inside the nanopore, two human plasma proteins could be distinguished by the characteristics of their current blockades. This fundamental understanding of the nanofluidic properties of nanopores provides a practical method to promote the capture and analysis of folded proteins by nanopores.

Beyond mass spectrometry, the next step in proteomics

Proteins can be the root cause of a disease, and they can be used to cure it. The need to identify these critical actors was recognized early (1951) by Sanger; the first biopolymer sequenced was a peptide, insulin. With the advent of scalable, single-molecule DNA sequencing, genomics and transcriptomics have since propelled medicine through improved sensitivity and lower costs, but proteomics has lagged behind. Currently, proteomics relies mainly on mass spectrometry (MS), but instead of truly sequencing, it classifies a protein and typically requires about a billion copies of a protein to do it. Here, we offer a survey that illuminates a few alternatives with the brightest prospects for identifying whole proteins and displacing MS for sequencing them. These alternatives all boast sensitivity superior to MS and promise to be scalable and seem to be adaptable to bioinformatics tools for calling the sequence of amino acids that constitute a protein.

Layer-by-layer modification effects on a nanopore's inner surface of polycarbonate track-etched membranes

The control of the morphology, as well as the physical and chemical properties, of nanopores is a key issue for many applications. Reducing pore size is important in nanopore-based sensing applications as it helps to increase sensitivity. Changes of other physical properties such as surface net charge can also modify transport selectivity of the pores. We have studied how polyelectrolyte layer-by-layer (LBL) surface modification can be used to change the characteristics of nanoporous membranes. Studies were performed with a custom made three-dimensional multilayer microfluidic device able to fit membrane samples. The device allowed us to efficiently control LBL film deposition over blank low-cost commercially available polycarbonate track-etched (PCTE) membranes. We have demonstrated pore diameter reduction and deposition of the layers inside the pores through confocal and SEM images. Posterior impedance measurement studies served to evaluate experimentally the effect of the LBL deposition on the net inner nanopore surface charge and diameter. Measurements using direct current (DC) and alternative current (AC) voltages have demonstrated contrasted behaviors depending on the number and parity of deposited opposite charge layers. PCTE membranes are originally negatively charged and results evidenced higher impedance increases for paired charge LBL depositions. Impedance decreased when an unpaired positive layer was added. These results showed a different influence on the overall ion motility due to the effect of different surface charges. Results have been fit into a model that suggested a strong dependence of nanopores' impedance module to surface charge on conductive buffers, such as Phosphate Buffer Saline (PBS), even on relatively large nanopores. In AC significant differences between paired and unpaired charged LBL depositions tended to disappear as the total number of layers increased.

The control of the morphology, as well as the physical and chemical properties, of nanopores is a key issue for many applications.

Single-Molecule Protein Detection in a Biofluid Using a Quantitative Nanopore Sensor

Protein detection in complex biological fluids has wide-ranging significance across proteomics and molecular medicine. Existing detectors cannot readily distinguish between specific and nonspecific interactions in a heterogeneous solution. Here, we show that this daunting shortcoming can be overcome by using a protein bait-containing biological nanopore in mammalian serum. The capture and release events of a protein analyte by the tethered protein bait occur outside the nanopore and are accompanied by uniform current openings. Conversely, nonspecific pore penetrations by nontarget components of serum, which take place inside the nanopore, are featured by irregular current blockades. As a result of this unique peculiarity of the readout between specific protein captures and nonspecific pore penetration events, our selective sensor can quantitatively sample proteins at single-molecule precision in a manner distinctive from those employed by prevailing methods. Because our sensor can be integrated into nanofluidic devices and coupled with high-throughput technologies, our approach will have a transformative impact in protein identification and quantification in clinical isolates for disease prognostics and diagnostics.

Nanopore-Based Strategy for Sensing of Copper(II) Ion and Real-Time Monitoring of a Click Reaction

A straightforward yet efficient, nanopore-based strategy that enables the sensitive detection of copper(II) ion (Cu²⁺) and real-time monitoring of a click reaction is provided. Two single-stranded DNAs (ssDNAs) are designed to act as the preprobes, one being modified with an azide and the other an alkyne. The presence of Cu²⁺ induces the ligation of two ssDNAs via click reaction, leading to the formation of a forked DNA which can quantitatively generate characteristic current signatures when interacts with α-hemolysin (α-HL) nanopore. The assay facilitates a highly selective and sensitive measurement of Cu²⁺ without the need for labels or signal amplification. More importantly, this nanopore platform exhibits excellent performance in real-time monitoring of a copper(I) ion (Cu⁺)-catalyzed click reaction at the single-molecule level, by recording the current signals of the forked DNA generated by click chemistry. The proposed strategy is believed to play an important role in both nanopore sensing and characterization of chemistry reactions, especially coupling reactions.

Electro-Mechanical Conductance Modulation of a Nanopore Using a Removable Gate

Ion channels form the basis of information processing in living cells by facilitating the exchange of electrical signals across and along cellular membranes. Applying the same principles to man-made systems requires the development of synthetic ion channels that can alter their conductance in response to a variety of external manipulations. By combining single-molecule electrical recordings with all-atom molecular dynamics simulations, we here demonstrate a hybrid nanopore system that allows for both a stepwise change of its conductance and a nonlinear current-voltage dependence. The conductance modulation is realized by using a short flexible peptide gate that carries opposite electric charge at its ends. We show that a constant transmembrane bias can position (and, in a later stage, remove) the peptide gate right at the most-sensitive sensing region of a biological nanopore FraC, thus partially blocking its channel and producing a stepwise change in the conductance. Increasing or decreasing the bias while having the peptide gate trapped in the pore stretches or compresses the peptide within the nanopore, thus modulating its conductance in a nonlinear but reproducible manner. We envision a range of applications of this removable-gate nanopore system, e.g. from an element of biological computing circuits to a test bed for probing the elasticity of intrinsically disordered proteins.

Colloquium: Ionic phenomena in nanoscale pores through 2D materials

Ion transport through nanopores permeates through many areas of science and technology, from cell behavior to sensing and separation to catalysis and batteries. Two-dimensional materials, such as graphene, molybdenum disulfide (MoS2), and hexagonal boron nitride (hBN), are recent additions to these fields. Low-dimensional materials present new opportunities to develop filtration, sensing, and power technologies, encompassing ion exclusion membranes, DNA sequencing, single molecule detection, osmotic power generation, and beyond. Moreover, the physics of ionic transport through pores and constrictions within these materials is a distinct realm of competing many-particle interactions (e.g., solvation/dehydration, electrostatic blockade, hydrogen bond dynamics) and confinement. This opens up alternative routes to creating biomimetic pores and may even give analogues of quantum phenomena, such as quantized conductance, in the classical domain. These prospects make membranes of 2D materials - i.e., 2D membranes - fascinating. We will discuss the physics and applications of ionic transport through nanopores in 2D membranes.

Enhanced Sensitivity in Nanopore Sensing of Cancer Biomarkers in Human Blood via Click Chemistry

Cancer biomarkers are expected to be indicative of the occurrence of certain cancer diseases before the tumors form and metastasize. However, many biomarkers can only be acquired in extremely low concentrations, which are often beyond the limit of detection (LOD) of current instruments and technologies. A practical strategy for nanopore sensing of cancer biomarkers in raw human blood down to the femtomolar level is developed here. This strategy first converts the detection of cancer biomarkers to the quantification of copper ions by conducting a sandwich assay involving copper oxide nanoparticles. The released Cu²⁺ is then taken to catalyze the "click" reaction which ligates a host-guest modified DNA probe. Finally, this DNA probe is subjected to single-channel recordings to afford the translocation events that can be used to derive the concentrations of the original biomarkers. Due to the amplification effects of nanoparticle loadings and the "click" reaction, the LOD of this strategy can be as low as the subfemtomolar level. Further, the acid treatment step could effectively eliminate the interferences from plasma proteins in raw human blood and make the strategy highly suitable for the detection of cancer biomarkers in clinical samples.

Real-time measurement of protein-protein interactions at single-molecule resolution using a biological nanopore

Protein-protein interactions (PPIs) are essential for many cellular processes. However, transient PPIs are difficult to measure at high throughput or in complex biological fluids using existing methods. We engineered a genetically encoded sensor for real-time sampling of transient PPIs at single-molecule resolution. Our sensor comprises a truncated outer membrane protein pore, a flexible tether, a protein receptor and a peptide adaptor. When a protein ligand present in solution binds to the receptor, reversible capture and release events of the receptor can be measured as current transitions between two open substates of the pore. Notably, the binding and release of the receptor by a protein ligand can be unambiguously discriminated in a complex sample containing fetal bovine serum. Our selective nanopore sensor could be applied for single-molecule protein detection, could form the basis for a nanoproteomics platform or might be adapted to build tools for protein profiling and biomarker discovery.

The Utility of Nanopore Technology for Protein and Peptide Sensing

Resistive pulse nanopore sensing enables label-free single-molecule analysis of a wide range of analytes. An increasing number of studies have demonstrated the feasibility and usefulness of nanopore sensing for protein and peptide characterization. Nanopores offer the potential to study a variety of protein-related phenomena that includes unfolding kinetics, differences in unfolding pathways, protein structure stability, and free-energy profiles of DNA-protein and RNA-protein binding. In addition to providing a tool for fundamental protein characterization, nanopores have also been used as highly selective protein detectors in various solution mixtures and conditions. This review highlights these and other developments in the area of nanopore-based protein and peptide detection.