Physiology and genetic traits of reverse osmosis membrane biofilms: a case study with Pseudomonas aeruginosa

Full-length 16S rRNA gene sequencing reveals the operating mode and chlorination-aggravated SWRO biofouling at a nuclear power plant

Reverse osmosis (RO) membrane fouling and biological contamination problems faced by seawater desalination systems are microbiologically related. We used full-length 16S rRNA gene sequencing to assess the bacterial community structure and chlorine-resistant bacteria (CRB) associated with biofilm growth in different treatment processes under the winter mode of a chlorinated seawater desalination system in China. At the outset of the winter mode, certain CRB, such as Acinetobacter, Pseudomonas, and Bacillus held sway over the bacterial community structure, playing a pivotal role in biofouling. At the mode's end, Deinococcus and Paracoccus predominated, with Pseudomonas and Roseovarius following suit, while certain CRB genera still maintained their dominance. RO and chlorination are pivotal factors in shaping the bacterial community structure and diversity, and increases in total heterotrophic bacterial counts and community diversity in safety filters may adversely affect the effectiveness of subsequent RO systems. Besides, the bacterial diversity and culturable biomass in the water produced by the RO system remain high, and some conditionally pathogenic CRBs pose a certain microbial risk as a source of drinking water. Targeted removal of these CRBs will be an important area of research for advancing control over membrane clogging and ensuring water quality safety in the future.

Combination of magnetic field and ultraviolet for fouling control in saline wastewater distribution systems

Fouling is a significant challenge for recycling and reusing saline wastewaters for industrial, agricultural or municipal applications. In this study, we propose a novel approach of magnetic field (MaF) and ultraviolet (UV) combined application for fouling mitigation. Results showed, combination of MaF and UV (MaF-UV) significantly decreased the content of biofouling and reduced the complexity of microbial networks, compared to UV and MaF alone treatments. This was due to MaF as pretreatment effectively reduced the water turbidity, improve the influent water quality of UV disinfection and increases UV transmittance, eliminating the adverse impacts of UV scattering and shielding, hence increased the inactivation effectiveness of UV disinfection process. MaF assisted UV also reduced the abundance of UV-resistant bacteria and inhibited the risk of bacterial photoreactivation and dark repair. Meanwhile, MaF-UV drastically reduced the contents of precipitates and particulate fouling by accelerating the transformation rate of CaCO3 crystal from compact calcite to loosen hydrated amorphous CaCO3, and enhancing the flocculation process. These findings demonstrated that MaF-UV is an effective anti-fouling strategy, and provide insights for sustainable application of saline wastewaters.

Incipient Biofouling Detection via Fiber Optical Sensing and Image Analysis in Reverse Osmosis Processes

Reverse osmosis (RO) is a widely used membrane technology for producing process water or tap water that is receiving increased attention due to water scarcity caused by climate change. A significant challenge in any membrane filtration is the presence of deposits on the membrane surfaces, which negatively affect filtration performance. Biofouling, the formation of biological deposits, poses a significant challenge in RO processes. Early detection and removal of biofouling are essential for effective sanitation and prevention of biological growth in RO-spiral wound modules. This study introduces two methods for the early detection of biofouling, capable of identifying initial stages of biological growth and biofouling in the spacer-filled feed channel. One method utilizes polymer optical fibre sensors that can be easily integrated into standard spiral wound modules. Additionally, image analysis was used to monitor and analyze biofouling in laboratory experiments, providing a complementary approach. To validate the effectiveness of the developed sensing approaches, accelerated biofouling experiments were conducted using a membrane flat module, and the results were compared with common online and offline detection methods. The reported approaches enable the detection of biofouling before known online parameters become indicative, effectively providing an online detection with sensitivities otherwise only achieved through offline characterization methods.

Multispecies biofilms on reverse osmosis membrane dictate the function and characteristics of the bacterial communities rather than their structure

The main reason for the deterioration of membrane operation during water purification processes is biofouling, which has therefore been extensively studied. Biofouling was shown to reduce membrane performance reflected by permeate flux decline, reduced selectivity, membrane biodegradation, and consequently, an increase in energy consumption. Studies of biofouling focused on the identification of the assembled microbial communities, the excretion of extracellular polymeric substances (EPS), and their combined role in reduced membrane performance and lifetime. However, the link between the structure and function of biofouling communities has not been elucidated to date. Here, we provide a novel insight, suggesting that bacterial functions rather than composition control biofouling traits on reverse osmosis (RO) membranes. We studied the potential activity of RO biofilms at metatranscriptome resolution, accompanied by the morphology and function of the biofouling layer over time, including microscopy and EPS composition, adhesion, and viscoelastic properties. To that end, we cultivated natural multispecies biofilms in RO membranes under treated wastewater flow and extracted RNA to study their taxonomies and gene expression profiles. Concomitantly, the biofilm structure was visualized using both scanning electron microscopy and laser scanning confocal microscopy. We also used quartz crystal microbalance with dissipation to characterize the affinity of EPS to membrane-mimetic sensors and evaluated the viscoelasticity of the Ex-Situ EPS layer formed on the sensor. Our results showed that different active bacterial taxa across five taxonomic classes were assembled on the RO membrane, while the composition shifted between 48 and 96 h. However, regardless of the composition, the maturation of the biofilm resulted in the expression of similar gene families tightly associated with the temporal kinetics of the EPS composition, adhesion, and viscoelasticity. Our findings highlight the temporal selection of specific microbial functions rather than composition, featuring the adhesion kinetics and viscoelastic properties of the RO biofilm.

Synergistic control of membrane biofouling using linoleic acid and sodium hypochlorite

Biofouling is a major operational problem in the reverse osmosis (RO) process, affecting the membrane performance. Although sodium hypochlorite (NaOCl) is used to chemically clean the biofouled membranes, high concentrations of NaOCl cause morphological and chemical damage to the RO membrane. The objective of this study is to enhance chemical cleaning efficiency by combining with a dispersion agent (linoleic acid, LA) that does not harm the RO membrane, to overcome the disadvantages of NaOCl. Biofilm cells were initially dispersed with LA treatment and biofouled layers were subsequently cleaned using NaOCl at low concentration. The optimized combination resulted in 3.9-4.4 times higher flux recovery efficiency than that with individual treatments. Furthermore, the combination decreased the volume and thickness of the biofilm as well as the amount of extracellular polymeric substances. Taken together, the combined treatment of LA and NaOCl significantly improves RO biofouling control.

2-Aminoimidazole Reduces Fouling and Improves Membrane Performance

Biofouling is difficult to control and hinders the performance of membranes in all applications but is of particular concern when natural waters are purified. Fouling, via multiple mechanisms (organic-only, biofouling-only, cell-deposition-only, and organic+biofouling), of a commercially available membrane (control) and a corresponding membrane coated with an anti-biofouling 2-aminoimidazole (2-AI membrane) was monitored and characterized during the purification of a natural water. Results show that the amount of bacterial cell deposition and organic fouling was not significantly different between control and 2-AI membranes; however, biofilm formation, concurrent or not with other fouling mechanisms, was significantly inhibited (95-98%, p<0.001) by the 2-AI membrane. The limited biofilm that formed on the 2-AI membrane was weaker (as indicated by the polysaccharide to protein ratio) and thus presumably easier to remove. The conductivity rejection by the 2-AI and control membranes was not significantly different throughout the 75-hour experiments, but the rejection of dissolved organic carbon by biofouled (biofouling-only, cell-deposition-only, and organic+biofouling) 2-AI membranes was statistically higher (10-12%, p=0.003-0.07). When biofouled, the water permeance of the 2-AI membranes decreased significantly less (p<0.05) over 75 hours than that of the control membranes, whether or not other additional types of fouling occurred concurrently. Despite the initially lower water permeances of 2-AI membranes (11% lower on average than controls), the 2-AI membranes outperformed the controls (10-11% higher average water permeance) after biofilm formation occurred. Overall, 2-AI membranes fouled less than controls without detriment to water productivity and solute rejection.

Using electromagnetic fields to inhibit biofouling and scaling in biogas slurry drip irrigation emitters

Reusing biogas slurry (BS) in agricultural drip irrigation systems may provide a solution to deal with the adverse environmental impacts of applying BS. Biofouling and scaling are two leading issues in drip irrigation emitters. This study investigated a practice that applied electromagnetic fields (EMFs) to control biofilms and scales. The bacterial communities and mineral precipitations in the clogging substances of emitters were determined. Results showed that EMFs inhibited the growth of microbes, and influenced BS physicochemical parameters. Consequently, EMFs shifted the bacterial communities with reduced diversities. Network analyses revealed that bacterial species under EMFs treatments showed lower average connectivities and simpler interactions, which were responsible for the decreases of extracellular polymers substances (EPS). Moreover, EMFs treatments not only reduced the carbonates in emitters, but also prevented the depositions of phosphates, silicates, and quartzes. EMFs also had impacts on the lattice parameters and crystal volumes of carbonates. In addition, the changes in bacterial communities and EPS contents were associated with the reductions of various minerals. Accordingly, EMFs effectively mitigated biofilms and scales with the fixed clogging substances reduced by 29.1-53.8 %. These findings demonstrated that applying EMFs is an effective anti-biofouling and anti-scaling treatment with potential applications in BS irrigation systems.

Reducing the Impacts of Biofouling in RO Membrane Systems through In Situ Low Fluence Irradiation Employing UVC-LEDs

Biofouling is a major concern for numerous reverse osmosis membrane systems. UV pretreatment of the feed stream showed promising results but is still not an established technology as it does not maintain a residual effect. By conducting accelerated biofouling experiments in this study, it was investigated whether low fluence UV in situ treatment of the feed using UVC light-emitting diodes (UVC-LEDs) has a lasting effect on the biofilm. The application of UVC-LEDs for biofouling control is a novel hybrid technology that has not been investigated, yet. It could be shown that a low fluence of 2 mJ∙cm^-2 delays biofilm formation by more than 15% in lab-scale experiments. In addition, biofilms at the same feed channel pressure drop exhibited a more than 40% reduced hydraulic resistance. The delay is probably linked to the inactivation of cells in the feed stream, modified adsorption properties or an induced cell cycle arrest. The altered hydraulic resistance might be caused by a change in the microbial community, as well as reduced adenosine triphosphate levels per cells, possibly impacting quorum sensing and extracellular polymeric substances production. Due to the observed biofilm attributes, low fluence UV-LED in situ treatment of the feed stream seems to be a promising technology for biofouling control.

Mitigation of biofouling in agricultural water distribution systems with nanobubbles

Biofouling poses considerable technical challenges to agricultural irrigation systems. Controlling biofouling with strong chemical biocides is not only expensive and sometimes ineffective, but also contributes to environmental pollution. This study investigated the application of nanobubbles (NBs) on minimizing biofouling in agricultural irrigation water pipelines. Treatment performances were assessed using low concentration bubbles (LCB) and high concentration bubbles (HCB) together with a negative control (CK: no-NBs). 16 s rRNA gene sequencing and X-ray diffraction were used to characterize the microbial community and mineral compositions of biofilms in water emitters. Results demonstrated that NBs effectively mitigated biofouling through reducing fixed-biomass by 31.3-52.1%. A significantly different microbial composition was found in the biofilm community with reduced biodiversity. Molecular ecological network analysis revealed that NBs were detrimental to the mutualistic interactions among microbial species - destabilizing the network complexity and size, which was expressed as decreasing in extracellular polymers and biofilm biomass. Furthermore, NBs significantly decreased the deposition of carbonate, silicate, phosphate, and quartz on the pipe surfaces, leading to reductions of total content of minerals in biofilms. Therefore, this study demonstrated that NBs treatment could be an effective, and eco-friendly solution for biofouling control in agricultural water distribution systems.

Impact of Hydrodynamics on the First Stages of Biofilm Formation in Forward Osmosis with Spacers

Initial deposition of bacteria is a critical stage during biofilm formation and biofouling development in membrane systems used in the water industry. However, the effects of hydrodynamic conditions on spatiotemporal deposition patterns of bacteria during the initial stages of biofilm formation remain unclear. Large field epifluorescence microscopy enabled in situ and real-time tracking of Bacillus subtilis in a forward osmosis system with spacers during the first 4 h of biofilm formation. This study quantitatively compares the spatiotemporal deposition patterns between different hydrodynamic conditions: high and low permeate water flux (6 or 30 L m^-2 h^-1) as well as high and low crossflow velocity (1 or 14 cm s^-1). Low crossflow velocity and high permeate water flux maximized bacterial attachment to the membrane surface, which was 60 times greater (6 × 10³ cells mm^-2) than at high crossflow velocity and low permeate water flux (<100 cells mm^-2). Imaging at 30 s intervals revealed three phases (i.e., lag, exponential, and linear) in the development of deposition over time. Quantification of spatial deposition patterns showed that an increase in the ratio of permeate water flux to crossflow velocity led to a homogeneous deposition, while a decrease had the opposite effect. The insights of this research indicate that an appropriate choice of hydrodynamic conditions can minimize bacteria accumulation prior to biofilm formation in new and cleaned FO membrane systems treating water of high fouling propensity.

Electromagnetic fields for biofouling mitigation in reclaimed water distribution systems

Biofouling is ubiquitous in reclaimed water distribution systems and causes various industrial, economic, and health issues. This paper investigated the anti-biofouling efficacy of electromagnetic fields (EMFs) for agricultural emitters used for two types of reclaimed water. 16S rRNA gene sequencing and X-ray diffraction were applied to determine the microbial communities and mineral compositions in biofilms. The obtained results revealed that EMF treatment significantly changed the bacterial communities and reduced their diversities in biofilm by affecting water quality parameters. Network analysis results indicated that EMFs were detrimental to the co-occurrence patterns of mutualistic relationships among bacterial species, destroyed the connectivity and complexity of the networks, and inhibited biofilm formation [decreased total biomass and extracellular polymeric substance (EPS) content]. EMF treatment could also decrease the deposition of mineral precipitates, reducing the carbonate and silicate content in biofilm. The decrease of EPS content appeared to reduce biofilm-induced mineral crystallization, while the ion precipitations accelerated by EMFs caused an erosive effect on biofilm. The results demonstrated that EMF treatment is an effective, chemical-free, and anti-biofouling treatment method with great potential for biofouling control in reclaimed water distribution systems.

Biodiversity and ecology of microorganisms in high pressure membrane filtration systems

High-pressure membrane filtration (reverse osmosis and nanofiltration) is used to purify different water sources, including wastewater, surface water, groundwater and seawater. A major concern in membrane filtration is the accumulation and growth of micro-organisms and their secreted polymeric substances, leading to reduced membrane performance and membrane biofouling. The fundamental understanding of membrane biofouling is limited despite years of research, as the means of microbial interactions and response to the conditions on the membrane surface are complicated. Here, we discuss studies that investigated the microbial diversity of fouled high-pressure membranes. High-throughput amplicon sequencing of the 16S rRNA gene have shown that Burkholderiales, Pseudomonadales, Rhizobiales, Sphingomonadales and Xanthomonadales frequently obtain a high relative abundance on fouled membranes. The bacterial communities present in the diverse feed water types and in pre-treatment compartments are different from the communities on the membrane, because high-pressure membrane filtration provides a selective environment for certain bacterial groups. The biofilms that form within the pre-treatment compartments do not commonly serve as an inoculum for the subsequent high-pressure membranes. Besides bacteria also fungi are detected in the water treatment compartments. In contrast to bacteria, the fungal community does not change much throughout membrane cleaning. The stable fungal diversity indicates that they are more significant in membrane biofouling than previously thought. By reviewing the biodiversity and ecology of microbes in the whole high pressure membrane filtration water chain, we have been able to identify potentials to improve biofouling control. These include modulation of hydrodynamic conditions, nutrient limitation and the combination of cleaning agents to target the entire membrane microbiome.

Insignificant Impact of Chemotactic Responses of Pseudomonas aeruginosa on the Bacterial Attachment to Organic Pre-Conditioned RO Membranes

We investigated the impact of conditioning compositions on the way bacteria move and adhere to reverse osmosis (RO) membranes that have been pre-conditioned by organic compounds. We used humic acid (HA), bovine serum albumin (BSA), and sodium alginate (SA) to simulate conditioning layers on the RO membranes. First, we investigated the chemotactic responses of Pseudomonas aeruginosa PAO1 to the organic substances and the impact of changes in physicochemical characteristics of pre-conditioned membranes on bacterial attachment. Second, we observed bacterial attachment under the presence or absence of nutrients or microbial metabolic activity. Results showed that there was no relationship between the chemotactic response of P. aeruginosa PAO1 and the organic substances, and the changes in hydrophobicity, surface free energy, and surface charge resulting from changing the composition of the conditioning layer did not seem to affect bacterial attachment, whereas changing the roughness of the conditioned membrane exponentially did (exponential correlation coefficient, R² = 0.85). We found that the initial bacterial attachment on the membrane surface is influenced by (i) the nutrients in the feed solution and (ii) the microbial metabolic activity, whereas the chemotaxis response has a negligible impact. This study would help to establish a suitable strategy to manage bacterial attachment.

Impacts of biofouling on the removal of pharmaceutically active compounds by a nanofiltration membrane

The impacts of biofouling on the retention of pharmaceutically active compounds (PhACs) by a commercially available nanofiltration membrane (NF 270) were systematically studied. Biofouling was achieved through inoculating live and dead Pseudomonas aeruginosa into artificial wastewater. In comparison to a clean membrane, an increase in PhAC rejection during biofouling with live cells was observed. However, the rejection behaviors presented more complex changes during biofouling with dead cells: PhAC rejection was below the clean membrane in the early biofouling stage; however, in the later stage, PhAC rejection was above the clean membrane. In addition, PhAC rejection behaviors present the similar tendency as salt rejection under both biofouling conditions. In addition, solute rejections were much lower for biofouling with dead cells than those for biofouling with live cells. Combined with biofilm characterization under both biofouling conditions, we could conclude that biofilm enhanced osmotic pressure (BEOP) due to higher cell counts and biofilm thickness led to a decrease in PhAC retention, especially for the dead cells. In addition, more dominant steric exclusion in the later stage of biofouling due to higher extracellular polymeric substances (EPS) concentration on the membrane surface resulted in an increase in PhAC retention.

Diversity and metallo-β-lactamase-producing genes in Pseudomonas aeruginosa strains isolated from filters of household water treatment systems

The microbiological quality of drinking water has long been a critical element in public health. Considering the high clinical relevance of Pseudomonas aeruginosa, we examined the filters of household water treatment systems for its presence and characteristics to determine the systems' efficiency in eliminating the bacteria. In total, filters of 50 household water treatment systems were examined. Microbiological and molecular methods were used for the detection and confirmation of P. aeruginosa isolates. Random Amplification of Polymorphic DNA-polymerase chain reaction (RAPD-PCR) was performed to detect similarities and differences among P. aeruginosa isolates. Combined disk (CD) method and double disk synergy test (DDST) were performed to detect metallo-beta-lactamase (MBL)-producing P. aeruginosa isolates. Finally, PCR was performed to detect MBL genes in MBL-producing strains. From the 50 analyzed systems, 76 colonies of P. aeruginosa were identified. In some systems, isolated bacteria from different filters harbored similar genetic profiles, indicating that these isolates may be able to pass through the filter and reach higher filters of the system. Phenotypic tests revealed 7 (9.2%) MBL-producing strains. Two isolates were positive for bla_VIM-1, whereas one isolate was positive for bla_NDM and bla_IMP-1. The wide distribution of resistant phenotypes and genetic plasticity of these bacteria in household water treatment systems indicate that resistance mechanisms circulate among P. aeruginosa isolates in the environment of the filtration systems. The presence of MBL-producing genes in these systems and P. aeruginosa as a potential reservoir of these resistance genes can be a major concern for public health.

Isolation and characterization of Sphingomonadaceae from fouled membranes

Membrane filtration systems are widely applied for the production of clean drinking water. However, the accumulation of particles on synthetic membranes leads to fouling. Biological fouling (i.e., biofouling) of reverse osmosis and nanofiltration membranes is difficult to control by existing cleaning procedures. Improved strategies are therefore needed. The bacterial diversity on fouled membranes has been studied, especially to identify bacteria with specialized functions and to develop targeted approaches against these microbes. Previous studies have shown that Sphingomonadaceae are initial membrane colonizers that remain dominant while the biofilm develops. Here, we characterized 21 Sphingomonadaceae isolates, obtained from six different fouled membranes, to determine which physiological traits could contribute to colonization of membrane surfaces. Their growth conditions ranged from temperatures between 8 and 42 oC, salinity between 0.0 and 5.0% w/v NaCl, pH from 4 and 10, and all isolates were able to metabolize a wide range of substrates. The results presented here show that Sphingomonadaceae membrane isolates share many features that are uncommon for other members of the Sphingomonadaceae family: all membrane isolates are motile and their tolerance for different temperatures, salt concentrations, and pH is high. Although relative abundance is an indicator of fitness for a whole group, for the Sphingomonadaceae it does not reveal the specific physiological traits that are required for membrane colonization. This study, therefore, adds to more fundamental insights in membrane biofouling.

Molecular biological tools in concrete biodeterioration - a mini review

Concrete structures develop biofilms when exposed to various environments. At a certain stage, the microbial films destroy the concrete structures leading to significant deterioration. Culture-dependent techniques give an incomplete picture of the microbial communities on the concrete surface. Culture-independent techniques or molecular biological tools pave a new way to analyse microbial communities involved in concrete biodeterioration. This study highlights the need to 'build' a database, for Microbiologically Influenced Concrete Corrosion (MICC) involving microbial groups that are being identified using culture-dependent and independent techniques. The role of molecular tools such as 16S rRNA sequencing, denaturing gradient gel electrophoresis (DGGE), Fluorescent in situ hybridization (FISH), Real-time Polymerase Chain Reaction (RT-PCR), microarray analysis, 2-Dimensional gel electrophoresis (2-DE) in analysing microbial communities on the concrete structures have been reviewed in this paper.

Intercepting signalling mechanism to control environmental biofouling

Biofouling in environmental systems employs bacterial quorum sensing signals (autoinducers) and extracellular polymeric substances to onset the event. The present review has highlighted on the fundamental mechanisms behind biofilm formation over broad spectrum environmental niches especially membrane biofouling in water systems and consequent chances of pathogenic contamination leading to global economic loss. It has broadly discussed on bioelectrical signal (via, potassium gradient) and molecular signal (via, AHLs) mediated quorum sensing which help to propagate biofilm formation. The review has illustrated the potential of genomic intervention towards biofouled membrane microbial community and has uncovered possible features of biofilm microenvironment like quorum quenching bacteria, bioelectrical waves capture, siderophores arrest and surface modifications. Based on information, the concept of interception of quorum signals (AHLs) and bioelectrical signals (K⁺) by employing electro-modified (negative charges) membrane surface have been hypothesized in the present review to favour anti-biofouling.

D-Tyrosine loaded nanocomposite membranes for environmental-friendly, long-term biofouling control

Strategies to control biofouling without using antimicrobial chemicals are needed to prevent the spread of antibiotic resistance genes and disruption of microbial activities in biological treatment. This study developed an environmentally friendly biofouling resistant membrane by incorporating d-tyrosine onto a commercial nanofiltration membrane using FAU type zeolite nanoparticles that covalently bound to the membrane surface as carriers for slow release. The d-tyrosine loaded membrane had similar water permeability as the unmodified membrane, but greatly reduced initial cell attachment and strongly inhibited subsequent biofilm formation without inactivating the bacteria. The membrane slowly released d-tyrosine in the time course of over 5 days, and retained its anti-biofouling capability in repeated 24 h efficacy tests for as long as 6 days. In nanofiltration operation, the d-tyrosine incorporated zeolite coating completely inhibited cell adhesion on the membrane surface and significantly alleviated membrane flux decline.

Early Detection of Biofouling on Water Purification Membranes by Ambient Ionization Mass Spectrometry Imaging

By direct analysis of water purification membranes using ambient ionization mass spectrometry, an attempt has been made to understand the molecular signatures of bacterial fouling. Membrane based purification methods are used extensively in water treatment, and a major challenge for them is biofouling. The buildup of microbes and their extracellular polymeric matrix clog the purification membranes and reduce their efficiency. To understand the early stages of bacterial fouling on water purification membranes, we have used desorption electrospray ionization mass spectrometry (DESI MS), where ion formation occurs in ambient conditions and the ionization event is surface sensitive. Biosurfactants at the air-water interface generated by microorganisms as a result of quorum sensing, influence the water-membrane interface and are important for the bacterial attachment. We show that these biosurfactants produced by bacteria can be indicator molecular species signifying initiation of biofilms on membrane surfaces, demonstrated by specific DESI MS signatures. In Pseudomonas aeruginosa, one of the best studied models for biofilm formation, this process is mediated by rhamnolipids forewarning bacterial fouling. Species dependent variation of such molecules can be used for the precise identification of the microorganisms, as revealed by studies on P. aeroginosa (ATCC 25619). The production of biosurfactants is tightly regulated at the transcriptional level by the quorum-sensing (QS) response. Thus, secretion of these extracellular molecules across the membrane surface allows rapid screening of the biofilm community. We show that, the ambient ionization mass spectrometry can detect certain toxic heavy metals present in water, using surfactant-metal complexes as analytes. We believe that such studies conducted on membranes in various input water streams will help design suitable membrane processes specific to the input streams.

Nanopatterning of steel by one-step anodization for anti-adhesion of bacteria

Surface nanopatterning of metals has been an effective technique for improved performance and functionalization. However, it is of great challenge to fabricate nanostructure on carbon steels despite their extensive use and urgent needs to maintain the performance reliability and durability. Here, we report a one-step anodization technique to nanopattern a carbon steel in 50 wt.% NaOH solution for highly effective anti-adhesion by sulphate reducing bacteria (SRB), i.e., Desulfovibrio desulfuricans subsp. desulfuricans (Beijerinck) Kluyver and van Niel. We characterize the morphology, structure, composition, and surface roughness of the nanostructured film formed on the steel as a function of anodizing potential. We quantify the surface hydrophobicity by contact angle measurements, and the SRB adhesion by fluorescent analysis. The optimal anodization potential of 2.0 V is determined for the best performance of anti-adhesion of SRB to the steel, resulting in a 23.5 times of reduction of SRB adhesion compared to bare steel. We discuss the mechanisms for the film formation on the steel during anodization, and the high-performance anti-adhesion of bacteria to nanopatterned steels. Our technique is simple, cost-effective and environment-friendly, providing a promising alternative for industry-scale surface nanopatterning of carbon steels for effective controlling of bacterial adhesion.

Biofouling of reverse osmosis membranes: effects of cleaning on biofilm microbial communities, membrane performance, and adherence of extracellular polymeric substances

Laboratory-scale reverse osmosis (RO) flat-sheet systems were used with two parallel flow cells, one treated with cleaning agents and a control (ie undisturbed). The cleaning efforts increased the affinity of extracellular polymeric substances (EPS) to the RO membrane and altered the biofilm surface structure. Analysis of the membrane biofilm community composition revealed the dominance of Proteobacteria. However, within the phylum Proteobacteria, γ-Proteobacteria dominated the cleaned membrane biofilm, while β-Proteobacteria dominated the control biofilm. The composition of the fungal phyla was also altered by cleaning, with enhancement of Ascomycota and suppression of Basidiomycota. The results suggest that repeated cleaning cycles select for microbial groups that strongly attach to the RO membrane surface by producing rigid and adhesive EPS that hampers membrane performance.

Cellulose effects on morphology and elasticity of Vibrio fischeri biofilms

Cellulose effects on Vibrio fischeri biofilm morphology were tested for the wild-type and two of its isogenic mutants that either exhibit increased cellulose production or do not produce cellulose at all. Confocal laser scanning microscopy imaging of each biofilm revealed that total sessile volume increases with cellulose expression, but the size of colonies formed with cellulose was smaller, creating a more diffuse biofilm. These morphological differences were not attributed to variations in bacterial deposition, extracellular polymeric substances affinity to the surface or bacterial growth. A positive correlation was found between cellulose expression, Young's (elastic) modulus of the biofilm analyzed with atomic force microscope and shear modulus of the related extracellular polymeric substances layers analyzed with quartz crystal microbalance with dissipation monitoring. Cellulose production also correlated positively with concentrations of extracellular DNA. A significant negative correlation was observed between cellulose expression and rates of diffusion through the extracellular polymeric substances. The difference observed in biofilm morphology is suggested as a combined result of cellulose and likely extracellular DNA (i) increasing biofilm Young's modulus, making shear removal more difficult, and (ii) decreased diffusion rate of nutrients and wastes into and out of the biofilm, which effectively limits colony size.

Viscoelastic Properties of Extracellular Polymeric Substances Can Strongly Affect Their Washing Efficiency from Reverse Osmosis Membranes

The role of the viscoelastic properties of biofouling layers in their removal from the membrane was studied. Model fouling layers of extracellular polymeric substances (EPS) originated from microbial biofilms of Pseudomonas aeruginosa PAO1 differentially expressing the Psl polysaccharide were used for controlled washing experiments of fouled RO membranes. In parallel, adsorption experiments and viscoelastic modeling of the EPS layers were conducted in a quartz crystal microbalance with dissipation (QCM-D). During the washing stage, as shear rate was elevated, significant differences in permeate flux recovery between the three different EPS layers were observed. According to the amount of organic carbon remained on the membrane after washing, the magnitude of Psl production provides elevated resistance of the EPS layer to shear stress. The highest flux recovery during the washing stage was observed for the EPS with no Psl. Psl was shown to elevate the layer's shear modulus and shear viscosity but had no effect on the EPS adhesion to the polyamide surface. We conclude that EPS retain on the membrane as a result of the layer viscoelastic properties. These results highlight an important relation between washing efficiency of fouling layers from membranes and their viscoelastic properties, in addition to their adhesion properties.

Biofilm forming capacity of Enterococcus faecalis on Gutta-percha points treated with four disinfectants using confocal scanning laser microscope: An in vitro study

Background:

The aim of this study was to evaluate and compare the in vitro biofilm forming capacity of Enterococcus faecalis on Gutta-percha points disinfected with four disinfectants.

Materials and Methods:

A total of 50 Gutta-percha points used in this study were divided into four test groups based on disinfectant (5.25% sodium hypochlorite, 2% chlorhexidine gluconate, 20% neem, 13% benzalkonium chloride [BAK]), and one control group. The Gutta-percha points were initially treated with corresponding disinfectants followed by anaerobic incubation in Brain Heart Infusion broth suspended with human serum and E. faecalis strain for 14 days. After incubation, these Gutta-percha points were stained with Acridine Orange (Sigma – Aldrich Co., St. Louis, MO, USA) and 0.5 mm thick cross section samples were prepared. The biofilm thickness of E. faecalis was analyzed quantitatively using a confocal scanning laser microscope. Results statistically analyzed using analysis of variance. P < 0.05 was considered to be significant.

Results:

Confocal scanning laser microscope showed reduced amount of E. faecalis biofilm on Gutta-percha points treated with BAK and sodium hypochlorite. Post-hoc (least square differences) test revealed that there is no statistically significant difference between BAK and sodium hypochlorite groups (P > 0.05).

Conclusion:

This study illustrates that the Gutta-percha points disinfected with sodium hypochlorite and BAK showed minimal biofilm growth on its surface.

D-amino acids inhibit initial bacterial adhesion: thermodynamic evidence

Bacterial biofilms are structured communities of cells enclosed in a self-produced hydrated polymeric matrix that can adhere to inert or living surfaces. D-Amino acids were previously identified as self-produced compounds that mediate biofilm disassembly by causing the release of the protein component of the polymeric matrix. However, whether exogenous D-amino acids could inhibit initial bacterial adhesion is still unknown. Here, the effect of the exogenous amino acid D-tyrosine on initial bacterial adhesion was determined by combined use of chemical analysis, force spectroscopic measurement, and theoretical predictions. The surface thermodynamic theory demonstrated that the total interaction energy increased with more D-tyrosine, and the contribution of Lewis acid-base interactions relative to the change in the total interaction energy was much greater than the overall nonspecific interactions. Finally, atomic force microscopy analysis implied that the hydrogen bond numbers and adhesion forces decreased with the increase in D-tyrosine concentrations. D-Tyrosine contributed to the repulsive nature of the cell and ultimately led to the inhibition of bacterial adhesion. This study provides a new way to regulate biofilm formation by manipulating the contents of D-amino acids in natural or engineered systems.

Biofouling of reverse-osmosis membranes under different shear rates during tertiary wastewater desalination: microbial community composition

We investigated the influence of feed-water shear rate during reverse-osmosis (RO) desalination on biofouling with respect to microbial community composition developed on the membrane surface. The RO membrane biofilm's microbial community profile was elucidated during desalination of tertiary wastewater effluent in a flat-sheet lab-scale system operated under high (555.6 s(-1)), medium (370.4 s(-1)), or low (185.2 s(-1)) shear rates, corresponding to average velocities of 27.8, 18.5, and 9.3 cm s(-1), respectively. Bacterial diversity was highest when medium shear was applied (Shannon-Weaver diversity index H' = 4.30 ± 0.04) compared to RO-membrane biofilm developed under lower and higher shear rates (H' = 3.80 ± 0.26 and H' = 3.42 ± 0.38, respectively). At the medium shear rate, RO-membrane biofilms were dominated by Betaproteobacteria, whereas under lower and higher shear rates, the biofilms were dominated by Alpha- and Gamma- Proteobacteria, and the latter biofilms also contained Deltaproteobacteria. Bacterial abundance on the RO membrane was higher at low and medium shear rates compared to the high shear rate: 8.97 × 10(8) ± 1.03 × 10(3), 4.70 × 10(8) ± 1.70 × 10(3) and 5.72 × 10(6) ± 2.09 × 10(3) copy number per cm(2), respectively. Interestingly, at the high shear rate, the RO-membrane biofilm's bacterial community consisted mainly of populations known to excrete high amounts of extracellular polymeric substances. Our results suggest that the RO-membrane biofilm's community composition, structure and abundance differ in accordance with applied shear rate. These results shed new light on the biofouling phenomenon and are important for further development of antibiofouling strategies for RO membranes.

Impact of organic nutrient load on biomass accumulation, feed channel pressure drop increase and permeate flux decline in membrane systems

The influence of organic nutrient load on biomass accumulation (biofouling) and pressure drop development in membrane filtration systems was investigated. Nutrient load is the product of nutrient concentration and linear flow velocity. Biofouling - excessive growth of microbial biomass in membrane systems - hampers membrane performance. The influence of biodegradable organic nutrient load on biofouling was investigated at varying (i) crossflow velocity, (ii) nutrient concentration, (iii) shear, and (iv) feed spacer thickness. Experimental studies were performed with membrane fouling simulators (MFSs) containing a reverse osmosis (RO) membrane and a 31 mil thick feed spacer, commonly applied in practice in RO and nanofiltration (NF) spiral-wound membrane modules. Numerical modeling studies were done with identical feed spacer geometry differing in thickness (28, 31 and 34 mil). Additionally, experiments were done applying a forward osmosis (FO) membrane with varying spacer thickness (28, 31 and 34 mil), addressing the permeate flux decline and biofilm development. Assessed were the development of feed channel pressure drop (MFS studies), permeate flux (FO studies) and accumulated biomass amount measured by adenosine triphosphate (ATP) and total organic carbon (TOC). Our studies showed that the organic nutrient load determined the accumulated amount of biomass. The same amount of accumulated biomass was found at constant nutrient load irrespective of linear flow velocity, shear, and/or feed spacer thickness. The impact of the same amount of accumulated biomass on feed channel pressure drop and permeate flux was influenced by membrane process design and operational conditions. Reducing the nutrient load by pretreatment slowed-down the biofilm formation. The impact of accumulated biomass on membrane performance was reduced by applying a lower crossflow velocity and/or a thicker and/or a modified geometry feed spacer. The results indicate that cleanings can be delayed but are unavoidable.

Biofouling of reverse-osmosis membranes during tertiary wastewater desalination: microbial community composition

Reverse-osmosis (RO) desalination is frequently used for the production of high-quality water from tertiary treated wastewater (TTWW). However, the RO desalination process is often hampered by biofouling, including membrane conditioning, microbial adhesion, and biofilm growth. The vast majority of biofilm exploration concentrated on the role of bacteria in biofouling neglecting additional microbial contributors, i.e., fungi and archaea. To better understand the RO biofouling process, bacterial, archaeal and fungal diversity was characterized in a laboratory-scale RO desalination plant exploring the TTWW (RO feed), the RO membrane and the RO feed tube biofilms. We sequenced 77,400 fragments of the ribosome small subunit-encoding gene (16S and 18S rRNA) to identify the microbial community members in these matrices. Our results suggest that the bacterial, archaeal but not fungal community significantly differ from the RO membrane biofouling layer to the feedwater and tube biofilm (P < 0.01). Moreover, the RO membrane supported a more diverse community compared to the communities monitored in the feedwater and the biofilm attached to the RO feedwater tube. The tube biofilm was dominated by Actinobacteria (91.2 ± 4.6%), while the Proteobacteria phylum dominated the feedwater and RO membrane (at relative abundance of 92.3 ± 4.4% and 71.5 ± 8.3%, respectively), albeit comprising different members. The archaea communities were dominated by Crenarchaeota (53.0 ± 6.9%, 32.5 ± 7.2% and 69%, respectively) and Euryarchaeota (43.3 ± 6.3%, 23.2 ± 4.8% and 24%, respectively) in all three matrices, though the communities' composition differed. But the fungal communities composition was similar in all matrices, dominated by Ascomycota (97.6 ± 2.7%). Our results suggest that the RO membrane is a selective surface, supporting unique bacterial, and to a lesser extent archaeal communities, yet it does not select for a fungal community.

Surface cell density effects on Escherichia coli gene expression during cell attachment

Escherichia coli attachment to a surface initiates a complex series of interconnected signaling and regulation pathways that promote biofilm formation and maturation. The present work investigates the effect of deposited cell density on E. coli cell physiology, metabolic activity, and gene expression in the initial stages of biofilm development. Deposited cell density is controlled by exploiting the relationship between ionic strength and bacterial attachment efficiency in a packed bed column. Distinct differences in cell transcriptome are analyzed by comparing sessile cultures at two different cell surface densities and differentiating ionic strength effects by analyzing planktonic cultures in parallel. Our results indicate that operons regulating trypotophan production and the galactitol phosphotransferase system (including dihydroxyacetone phosphate synthesis) are strongly affected by cell density on the surface. Additional transcriptome and metabolomic impacts of cell density on succinate, proline, and pyroglutamic acid systems are also reported. These results are consistent with the hypothesis that surface cell density plays a major role in sessile cell physiology, commencing with the first stage of biofilm formation. These findings improve our understanding of biofilm formation in natural and engineered environmental systems and will contribute to future work ranging from pathogen migration in the environment to control of biofouling on engineered surfaces.

Microbial community analysis of fouled reverse osmosis membranes used in water recycling

Biofouling on RO membranes has major cost implications in water reclamation. In this study membranes and water samples were collected from a RO pilot-plant operated on two sites to study the differences in microbial communities in order to develop a better understanding of the biofouling. For the two sites studied, the examination of the front membrane of the first stage and the tail membrane of the second stage of the RO train using 16S rRNA gene-based molecular technique showed that bacteria were similar on both stages and no significant effect of the membrane location within the RO train on the biofilm development could be discerned. However, the comparison of the identified bacteria from membrane samples between the two sites showed that each site is specific, leading to a different composition of microbial communities. The different nutrient concentrations in the RO feed water due to the different biological pre-treatments are one potential explanation for the observed differences in the microbial communities. Seasonal variations also play a major role in the development of microbial communities as shown by the significant differences observed between the communities measured in the samples in winter and summer on the second site. The results did not show similarity between the species identified on the RO membranes and in the feed water. Hence, the relationship of microbial community between the water generated during the pre-treatment process and RO membranes is not obvious. From this study, results showed that there is an actual need to investigate the development of microbial communities on membrane surface in real conditions in order to suggest tailored solutions for biofouling control and removal.

Aquatic biofouling prevention by electrically charged nanocomposite polymer thin film membranes

Electrically conductive polymer-nanocomposite (ECPNC) tight nanofiltration (NF) thin film membranes were demonstrated to have biofilm-preventing capabilities under extreme bacteria and organic material loadings. A simple route to the creation and application of these polyamide-carbon nanotube thin films is also reported. These thin films were characterized with SEM and TEM as well as FTIR to demonstrate that the carbon nanotubes are embedded within the polyamide and form ester bonds with trimesoyl chloride, one of the monomers of polyamide. These polymer nanocomposite thin film materials boast high electrical conductivity (∼400 S/m), good NaCl rejection (>95%), and high water permeability. To demonstrate these membranes' biofouling capabilities, we designed a cross-flow water filtration vessel with insulated electrical leads connecting the ECPNC membranes to an arbitrary waveform generator. In all experiments, conducted in highly bacterially contaminated LB media, flux tests were run until fluxes decreased by 45 ± 3% over initial flux. Biofilm-induced, nonreversible flux decline was observed in all control experiments and a cross-flow rinse with the feed solution failed to induce flux recovery. In contrast, flux decrease for the ECPNC membranes with an electric potential applied to their surface was only caused by deposition of bacteria rather than bacterial attachment, and flux was fully recoverable following a short rinse with the feed solution and no added cleaning agents. The prevention of biofilm formation on the ECPNC membranes was a long-term effect, did not decrease with use, and was highly reproducible.

A review of membrane fouling in municipal secondary effluent reclamation

Reclamation of municipal secondary effluent for non-potable purposes is considered vital in alleviating the demand for existing limited water supplies while helping to protect remaining water sources from being polluted. In recent decades, reverse osmosis and nanofiltration membrane technologies have become increasingly attractive for reclamation of municipal secondary effluent because they are highly efficient, easy to operate, and economical. However, membrane fouling is a major obstacle in the development of membrane technology in municipal secondary effluent reclamation. This paper reviews three types of membrane fouling in municipal secondary effluent reclamation, namely, effluent organic matter (EfOM) membrane fouling, microbial membrane fouling, and inorganic membrane fouling, as well as their correlation. Membrane fouling by EfOM and microbes are found to be severe, and they are significantly correlated. Most previous studies conducted laboratory-scale experiments of membrane fouling with model organic matters and bacteria, but these model organic matters and bacteria might still be unrepresentative. More studies on membrane fouling in municipal secondary effluent reclamation with actual wastewater are essential.

Antimicrobial Pressure of Ciprofloxacin and Gentamicin on Biofilm Development by an Endoscope-Isolated Pseudomonas aeruginosa

This work aims at characterizing endoscope biofilm-isolated (PAI) and reference strain P. aeruginosa (PA) adhesion, biofilm formation and sensitivity to antibiotics. The recovery ability of the biofilm-growing bacteria subjected to intermittent antibiotic pressure (ciprofloxacin (CIP) and gentamicin (GM)), as well as the development of resistance towards antibiotics and benzalkonium chloride (BC), were also determined. The capacity of both strains to develop biofilms was greatly impaired in the presence of CIP and GM. Sanitization was not complete allowing biofilm recovery after the intermittent cycles of antibiotic pressure. The environmental pressure exerted by CIP and GM did not develop P. aeruginosa resistance to antibiotics nor cross-resistance towards BC. However, data highlighted that none of the antimicrobials led to complete biofilm eradication, allowing the recovery of the remaining adhered population possibly due to the selection of persister cells. This feature may lead to biofilm recalcitrance, reinforcement of bacterial attachment, and recolonization of other sites.

Effect of antimicrobial residues on early adhesion and biofilm formation by wild-type and benzalkonium chloride-adapted Pseudomonas aeruginosa

Antimicrobial residue deposition can change the physico-chemical properties of bacteria and surfaces and thus promote or impair bacterial adhesion. This study focuses on benzalkonium chloride (BC) deposition on polystyrene (PS) surfaces and the influence of this conditioning film on the physico-chemical properties of PS and on early adhesion and biofilm formation by Pseudomonas aeruginosa wild-type and its laboratory BC-adapted strain. The latter readily acquired the ability to grow in BC, and also exhibited physico-chemical surface changes. The existence of residues on PS surfaces altered their hydrophobicity and favoured adhesion as determined by the free energy and early adhesion characterization. Adapted bacteria revealed a higher ability to adhere to surfaces and to develop biofilms, especially on BC-conditioned surfaces, which thereby could enhance resistance to sanitation attempts. These findings highlight the importance of investigations concerning the antimicrobial deposition effect after cleaning procedures, which may encourage bacterial adhesion, especially of bacteria that have been previously exposed to chemical stresses.