Half-metallic graphene nanoribbons

Peri-pentacene and Peri-hexacene Diradicaloids

Peri-acenes are valuable models for zigzag-edged graphene nanoribbons, but their synthesis poses significant challenges. In this study, stable derivatives of peri-pentacene (Peri-P) and peri-hexacene (Peri-H) were synthesized. Through kinetic blocking and a synergistic captodative effect, both compounds displayed remarkable stability under ambient air and light conditions. They show significant diradical character (y0), with y0 = 75.4% for Peri-P and y0 = 90.7% for Peri-H, alongside narrow singlet-triplet energy gaps of -1.68 ± 0.04 and -1.28 ± 0.02 kcal/mol, respectively. The structure of Peri-H was confirmed by X-ray crystallography, with bond-length analysis and theoretical calculations indicating a dominant structure featuring five aromatic sextet rings. Their optical and electrochemical properties were also studied and compared to those of smaller peri-acenes.

Prediction of metal-free Stoner and Mott-Hubbard magnetism in triangulene-based two-dimensional polymers

Ferromagnetism and antiferromagnetism require robust long-range magnetic ordering, which typically involves strongly interacting spins localized at transition metal atoms. However, in metal-free systems, the spin orbitals are largely delocalized, and weak coupling between the spins in the lattice hampers long-range ordering. Metal-free magnetism is of fundamental interest to physical sciences, unlocking unprecedented dimensions for strongly correlated materials and biocompatible magnets. Here, we present a strategy to achieve strong coupling between spin centers of planar radical monomers in π-conjugated two-dimensional (2D) polymers and rationally control the orderings. If the π-states in these triangulene-based 2D polymers are half-occupied, then we predict that they are antiferromagnetic Mott-Hubbard insulators. Incorporating a boron or nitrogen heteroatom per monomer results in Stoner ferromagnetism and half-metallicity, with the Fermi level located at spin-polarized Dirac points. An unprecedented antiferromagnetic half-semiconductor is observed in a binary boron-nitrogen-centered 2D polymer. Our findings pioneer Stoner and Mott-Hubbard magnetism emerging in the electronic π-system of crystalline-conjugated 2D polymers.

Advanced nanoribbons in water purification: A comprehensive review

The increasing scarcity of clean water, coupled with the environmental repercussions of municipal and industrial wastewater, underscores the imperative for advancing novel technologies aimed at clean water production and effectively removing impurities and toxic contaminants. Research focusing on ribbon-based technologies has garnered substantial attention in recent years due to their promising applications in various fields. This article presents a comprehensive review of the diverse applications of ribbon in water and wastewater treatment. It delves into the various types of ribbon employed for water purification, elucidating their effectiveness in removing contaminants such as heavy metals, dyes, pesticides, medical waste, oil pollutants, and radioactive waste. We will also discuss methods such as adsorption, membrane separation, and advanced oxidation processes, which help to understand how ribbons remove pollutants from water. This review summarizes the recent progress in the field of water purification and discusses the current state-of-the-art research on the use of ribbons in wastewater treatment. The end of this article gives information about the regeneration and reusability of ribbons and about challenges and prospects.

Anisotropic half-metallicity in zigzag edge SiP3 nanoribbons

We investigate magnetic and spin-transport properties of the zigzag-edge nanoribbon structures of two-dimensional (2D) SiP3 system within first-principle calculations. Based on the edge terminations, the nanoribbons can be categorized in three subclasses, two of them with even number of silicon (Si) atoms and one of them with odd number of Si atoms in the one-dimensional unitcell with antiferromagnetic bulk spin-ordering, analogous to their 2D counterpart. All the ribbons exhibit indirect band-gap semiconducting behavior and the gap decreases with increase in width of the ribbons. The nanoribbon with only phosphorus (P) atoms at least along one of the edges show half-metallic behavior over a small bias window, when probed with cross-ribbon external electric field. Especially, the nanoribbon with odd number of Si atoms stabilizes in a ground state with net non-zero magnetization and exhibits half-metallicity only under forward bias. Such anisotropic half-metallicity along with the precise control of the electronic properties in terms of edge and external bias manipulation hold immense potential for spintronic and switching device applications.

Combined effect of strain and intrinsic spin-orbit coupling on band gap engineering of GNRs: a first-principles study

By employing first-principles calculations, we theoretically investigate the impact of uniaxial strain and intrinsic spin-orbit coupling (SOC) on the electronic properties of zigzag and armchair edge hydrogen (H)-passivated graphene nanoribbons (GNRs). We find that band structure and density of states of 4-zigzag graphene nanoribbon (ZGNR) and 15-armchair graphene nanoribbon (AGNR) are highly sensitive to the combined effect of strain and intrinsic SOC. In the case of H-passivated 4-ZGNR, SOC with a strain>10% increases the energy band by increasing spin-polarized states at the opposite edges. In contrast to 4-ZGNR, the oscillatory behavior of band gap of H-passivated 15-AGNR is preserved in the presence of strain and SOC. Moreover, for both types of GNRs (zigzag and armchair), the presence of strain and intrinsic SOC preserve spin symmetry.

Fast photochromism of helicene-bridged imidazole dimers

The unique optical and magnetic properties of organic biradicaloids on polycyclic aromatic hydrocarbons are of fundamental interest in the development of novel organic optoelectronic materials. Open-shell π-conjugated molecules with helicity have recently attracted a great deal of attention due to the magnetic-field-dependence and spin-selectivity arising from the combination of helical chirality and electron spins. However, the molecular design for helical biradicaloids is limited due to the thermal instability and high reactivity. Herein, we achieved fast photochromic reactions and reversible photo-generation of biradical species using helicene-bridged imidazole dimers. A [9]helicene-bridged imidazole dimer exhibits reversible photochromism upon UV light irradiation. The transient species produced reversibly by UV light irradiation exhibited ESR spectra with a fine structure characteristic of a triplet radical pair, indicating the reversible generation of the biradical. The half-life of the thermal recombination reaction of the biradical was estimated to be 29 ms at 298 K. Conversely, a substantial activation energy barrier was confirmed for the intramolecular recombination reaction in the [7]helicene-bridged imidazole dimer, attributed to the extended pitch length of [7]helicene. The temperature dependence of the thermal back reactions revealed that the [7]helicene and [9]helicene moieties functioned as 'soft' and 'hard' molecular bridges, respectively. These findings pave the way for future advances in the development of photoswitchable helical biradicaloids.

Recent Advances in Transparent Electrodes and Their Multimodal Sensing Applications

This review examines the recent advancements in transparent electrodes and their crucial role in multimodal sensing technologies. Transparent electrodes, notable for their optical transparency and electrical conductivity, are revolutionizing sensors by enabling the simultaneous detection of diverse physical, chemical, and biological signals. Materials like graphene, carbon nanotubes, and conductive polymers, which offer a balance between optical transparency, electrical conductivity, and mechanical flexibility, are at the forefront of this development. These electrodes are integral in various applications, from healthcare to solar cell technologies, enhancing sensor performance in complex environments. The paper addresses challenges in applying these electrodes, such as the need for mechanical flexibility, high optoelectronic performance, and biocompatibility. It explores new materials and innovative techniques to overcome these hurdles, aiming to broaden the capabilities of multimodal sensing devices. The review provides a comparative analysis of different transparent electrode materials, discussing their applications and the ongoing development of novel electrode systems for multimodal sensing. This exploration offers insights into future advancements in transparent electrodes, highlighting their transformative potential in bioelectronics and multimodal sensing technologies.

Spin Gapless Quantum Materials and Devices

Quantum materials, with nontrivial quantum phenomena and mechanisms, promise efficient quantum technologies with enhanced functionalities. Quantum technology is held back because a gap between fundamental science and its implementation is not fully understood yet. In order to capitalize the quantum advantage, a new perspective is required to figure out and close this gap. In this review, spin gapless quantum materials, featured by fully spin-polarized bands and the electron/hole transport, are discussed from the perspective of fundamental understanding and device applications. Spin gapless quantum materials can be simulated by minimal two-band models and could help to understand band structure engineering in various topological quantum materials discovered so far. It is explicitly highlighted that various types of spin gapless band dispersion are fundamental ingredients to understand quantum anomalous Hall effect. Based on conventional transport in the bulk and topological transport on the boundaries, various spintronic device aspects of spin gapless quantum materials as well as their advantages in different models for topological field effect transistors are reviewed.

Implementation of excellent spin-filtering effect in half-metallic electrode-based single-molecule optoelectronic devices

The application of half-metallic materials in single-molecule optoelectronic devices opens a promising way in advancing device performance and functionality, thus addressing a research question of significance. Here we propose a series of single-molecule devices with half-metallic FeN4-doped armchair graphene nanoribbon as electrodes and metalloporphyrin (MPr) molecules as photoresponsive materials for photon harvesting, which are driven by photogalvanic effects (PGEs). Through the quantum transport simulations, we systematically investigated the spin-polarized photocurrents under the linearly polarized light illumination in these devices. Since the exclusive opening only exists in the spin-up channel of the half-metallic nanoribbons, these devices can generate a large photocurrent in the spin-up direction whereas suppressing the spin-down photocurrent. Consequently, they exhibit an effective spin-filtering effect at numerous photon energies. Our study unveils the excellent spin-filtering effect achieved in single-molecule optoelectronic devices with half-metallic electrodes, showing instructive significance for the future design of new optoelectronic devices.

One-Dimensional Magnetic Conduction Channels across Zigzag Graphene Nanoribbon/Hexagonal Boron Nitride Heterojunctions

We examine the electronic structure of recently fabricated in-plane heterojunctions of zigzag graphene nanoribbons embedded in hexagonal boron nitride. We focus on hitherto unexplored interface configurations in which both edges of the nanoribbon are bonded to the same chemical species, either boron or nitrogen atoms. Using ab initio and mean-field Hubbard model calculations, we reveal the emergence of one-dimensional magnetic conducting channels at these interfaces. These channels originate from the energy shift of the magnetic interface states that is induced by charge transfer between the nanoribbon and hexagonal boron nitride. We further address the response of these heterojunctions to external electric and magnetic fields, demonstrating the tunability of energy and spin splittings in the electronic structure. Our findings establish that zigzag graphene nanoribbon/hexagonal boron nitride heterojunctions are a suitable platform for exploring and engineering spin transport in the atomically thin limit, with potential applications in integrated spintronic devices.

Delocalized spin states at zigzag termini of armchair graphene nanoribbon

Using scanning tunneling microscopy and spectroscopy we demonstrate a revival of magnetism in 7-armchair nanoribbon by unpassivated atoms at the termini. Namely, a pair of intense Kondo resonances emerges at the peripheries of zigzag terminus revealing the many-body screening effects of local magnetic moments. Although Kondo resonance originates from a missing local orbital, it extends to a distance of 2.5 nm along the edge of the ribbon. The results are complemented by density functional theory calculations which suggest a possible coupling between Kondo states despite screening effects of substrate electrons. These findings indicate a possibility to restore intrinsic magnetic ordering in graphene nanoribbon without major structural modifications.

Nitrile Vibrational Lifetimes as Probes of Local Electric Fields

Optical measurements of electric fields have wide-ranging applications in the fields of chemistry and biology. Previously, such measurements focused on shifts in intensity or frequency. Here, we show that nitrile vibrational lifetimes can report local electric fields through ultrasensitive picosecond mid-infrared-near-infrared double-resonance fluorescence spectro-microscopy on Rhodamine 800. Using a robust convolution fitting approach, we observe that the nitrile vibrational lifetimes are strongly linearly correlated (R2 = 0.841) with solvent reaction fields. Supported by density functional theory, we rationalize this trend through a doorway model of intramolecular vibrational energy redistribution. This work provides new fundamental insights into the nature of vibrational energy flow in large polyatomic molecular systems and establishes a theoretical basis for electric field sensing with vibrational lifetimes, offering a new experimental dimension for probing intracellular electrostatics.

Large and Pressure-Dependent c-Axis Piezoresistivity of Highly Oriented Pyrolytic Graphite near Zero Pressure

The c-axis piezoresistivity is a fundamental and important parameter of graphite, but its value near zero pressure has not been well determined. Herein, a new method for studying the c-axis piezoresistivity of van der Waals materials near zero pressure is developed on the basis of in situ scanning electron microscopy and finite element simulation. The c-axis piezoresistivity of microscale highly oriented pyrolytic graphite (HOPG) is found to show a large value of 5.68 × 10-5 kPa-1 near zero pressure and decreases by 2 orders of magnitude to the established value of ∼10-7 kPa-1 when the pressure increases to 200 MPa. By modulating the serial tunneling barrier model on the basis of the stacking faults, we describe the c-axis electrical transport of HOPG under compression. The large c-axis piezoresistivity near zero pressure and its large decrease in magnitude with pressure are attributed to the rapid stiffening of the electromechanical properties under compression.

Prediction of intrinsic room-temperature ferromagnetism in two-dimensional CrInX2 (X = S, Se, Te) monolayers

Herein, using density functional theory, novel two-dimensional (2D) CrInX2 (X = S, Se, Te) structures are predicted to be practical ferromagnetic (FM) semiconductors. Phonon vibrations and molecular dynamics simulations verified their structural and thermodynamic stability. Sizable fully spin-polarized band gaps of 1.03 and 0.69 eV are found for CrInS2 and CrInSe2, while CrInTe2 exhibits half-metallic band nature (at 0 K with a perfect lattice). The high magnetic anisotropy energies are responsible for their long-range spin polarization. The Curie temperatures (Tc) are estimated to be 347, 397 and 447 K for CrInS2, CrInSe2 and CrInTe2, respectively, all well above the room-temperature. The high Tc originates from unusual FM direct exchange, the efficient super-exchange coupling between neighboring Cr eg-orbitals with zero virtual exchange gaps and the presence of dual Cr-X-Cr super-exchange channels. Our systematic study of the CrInX2 monolayer suggests that it could be a promising material for spintronics applications.

Electric-Field-Tunable Edge Transport in Bernal-Stacked Trilayer Graphene

This Letter presents a nonlocal study on the electric-field-tunable edge transport in h-BN-encapsulated dual-gated Bernal-stacked (ABA) trilayer graphene across various displacement fields (D) and temperatures (T). Our measurements revealed that the nonlocal resistance (R_{NL}) surpassed the expected classical Ohmic contribution by a factor of at least 2 orders of magnitude. Through scaling analysis, we found that the nonlocal resistance scales linearly with the local resistance (R_{L}) only when the D exceeds a critical value of ∼0.2  V/nm. Additionally, we observed that the scaling exponent remains constant at unity for temperatures below the bulk-band gap energy threshold (T<25  K). Further, the value of R_{NL} decreases in a linear fashion as the channel length (L) increases. These experimental findings provide evidence for edge-mediated charge transport in ABA trilayer graphene under the influence of a finite displacement field. Furthermore, our theoretical calculations support these results by demonstrating the emergence of dispersive edge modes within the bulk-band gap energy range when a sufficient displacement field is applied.

Precise synthesis of graphene by chemical vapor deposition

Graphene, a typical representative of the family of two-dimensional (2D) materials, possesses a series of phenomenal physical properties. To date, numerous inspiring discoveries have been made on its structures, properties, characterization, synthesis, transfer and applications. The real practical applications of this magic material indeed require large-scale synthesis and precise control over its structures, such as size, crystallinity, layer number, stacking order, edge type and contamination levels. Nonetheless, studies on the precise synthesis of graphene are far from satisfactory currently. Our review aims to deal with the precise synthesis of four critical graphene structures, including single-crystal graphene (SCG), AB-stacked bilayer graphene (AB-BLG), etched graphene and clean graphene. Meanwhile, existing problems and future directions in the precise synthesis of graphene are also briefly discussed.

On-Surface Synthesis of Anthracene-Fused Zigzag Graphene Nanoribbons from 2,7-Dibromo-9,9'-bianthryl Reveals Unexpected Ring Rearrangements

On-surface synthesis has emerged as a powerful strategy to fabricate unprecedented forms of atomically precise graphene nanoribbons (GNRs). However, the on-surface synthesis of zigzag GNRs (ZGNR) has met with only limited success. Herein, we report the synthesis and on-surface reactions of 2,7-dibromo-9,9'-bianthryl as the precursor toward π-extended ZGNRs. Characterization by scanning tunneling microscopy and high-resolution noncontact atomic force microscopy clearly demonstrated the formation of anthracene-fused ZGNRs. Unique skeletal rearrangements were also observed, which could be explained by intramolecular Diels-Alder cycloaddition. Theoretical calculations of the electronic properties of the anthracene-fused ZGNRs revealed spin-polarized edge-states and a narrow bandgap of 0.20 eV.

Topological electronic states in holey graphyne

We unveil that the holey graphyne (HGY), a two-dimensional carbon allotrope where benzene rings are connected by two -C≡C- bonds fabricated recently in a bottom-up way, exhibits topological electronic states. Using first-principles calculations and Wannier tight-binding modeling, we discover a higher-order topological invariant associated withC2symmetry of the material, and show that the resultant corner modes appear in nanoflakes matching to the structure of precursor reported previously, which are ready for direct experimental observations. In addition, we find that a band inversion between emergentg-like andh-like orbitals gives rise to a nontrivial topology characterized byZ2invariant protected by an energy gap as large as 0.52 eV, manifesting helical edge states mimicking those in the prominent quantum spin Hall effect, which can be accessed experimentally after hydrogenation in HGY. We hope these findings trigger interests towards exploring the topological electronic states in HGY and related future electronics applications.

Synthesis of Tridecacene by Multistep Single-Molecule Manipulation

Acenes represent a unique class of polycyclic aromatic hydrocarbons that have fascinated chemists and physicists due to their exceptional potential for use in organic electronics. While recent advances in on-surface synthesis have resulted in higher acenes up to dodecacene, a comprehensive understanding of their fundamental properties necessitates their expansion toward even longer homologues. Here, we demonstrate the on-surface synthesis of tridecacene via atom-manipulation-induced conformational preparation and dissociation of a trietheno-bridged precursor on a Au(111) surface. The generated tridecacene has been investigated by scanning tunneling microscopy and spectroscopy (STM/STS), combined with first-principles calculations. We observe that the STS transport gap (1.09 eV) shrinks again following the gap reopening of dodecacene (1.4 eV). Spin-polarized density functional theory calculations confirm an antiferromagnetic open-shell ground-state electronic configuration for tridecacene in the gas phase. Interestingly, tridecacene's open-shell character is significantly reduced upon interaction with the Au(111) surface despite being only physisorbed. The interaction with the surface leads to a lowering of the magnetization of tridecacene, a reduced gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), compared to the gas phase, and a reduced relative energy to the nonmagnetic state, making it nearly isoenergetic. These observations show qualitatively that the influence of the Au(111) substrate on the properties of long acenes is significant, which is important for interpreting the measured STS transport gaps. Our work contributes to a fundamental understanding of the electronic properties of long acenes, confirming a nonmonotonous length-dependent HOMO-LUMO gap, and to the development of multistep tip-assisted synthesis of elusive compounds.

The chimera of 2D- and 1D-graphene magnetization by hydrogenation or fluorination: critically revisiting old schemes and proposing new ones by ab initio methods

Graphene is an ideal candidate material for spintronics due to its layered structure and peculiar electronic structure. However, in its pristine state, the production of magnetic moments is not trivial. A very appealing approach is the chemical modification of pristine graphene. The main obstacle is the control of the geometrical features and the selectivity of functional groups. The lack of a periodic functionalization pattern of the graphene sheet prevents, therefore, the achievement of long-range magnetic order, thus limiting its use in spintronic devices. In such regards, the stability and the magnitude of the instilled magnetic moment depending on the size and shape of in silico designed graphane islands and ribbons embedded in graphene matrix will be computed and analysed. Our findings thus suggest that a novel and magneto-active graphene derivative nanostructure could become achievable more easily than extended graphone or nanoribbons, with a strong potential for future spintronics applications with a variable spin-current density.

Hybrid Edge Results in Narrowed Band Gap: Bottom-up Liquid-Phase Synthesis of Bent N = 6/8 Armchair Graphene Nanoribbons

Scalable fabrication of graphene nanoribbons with narrow band gaps has been a nontrivial challenge. Here, we have developed a simple approach to access narrow band gaps using hybrid edge structures. Bottom-up liquid-phase synthesis of bent N = 6/8 armchair graphene nanoribbons (AGNRs) has been achieved in high efficiency through copolymerization between an o-terphenyl monomer and a naphthalene-based monomer, followed by Scholl oxidation. An unexpected 1,2-aryl migration has been discovered, which is responsible for introducing kinked structures into the GNR backbones. The N = 6/8 AGNRs have been fully characterized to support the proposed structure and show a narrow band gap and a relatively high electrical conductivity. In addition, their application in efficient gas sensing has also been demonstrated.

Electronic Structure of Isolated Graphene Nanoribbons in Solution Revealed by Two-Dimensional Electronic Spectroscopy

Structurally well-defined graphene nanoribbons (GNRs) are nanostructures with unique optoelectronic properties. In the liquid phase, strong aggregation typically hampers the assessment of their intrinsic properties. Recently we reported a novel type of GNRs, decorated with aliphatic side chains, yielding dispersions consisting mostly of isolated GNRs. Here we employ two-dimensional electronic spectroscopy to unravel the optical properties of isolated GNRs and disentangle the transitions underlying their broad and rather featureless absorption band. We observe that vibronic coupling, typically neglected in modeling, plays a dominant role in the optical properties of GNRs. Moreover, a strong environmental effect is revealed by a large inhomogeneous broadening of the electronic transitions. Finally, we also show that the photoexcited bright state decays, on the 150 fs time scale, to a dark state which is in thermal equilibrium with the bright state, that remains responsible for the emission on nanosecond time scales.

Exploring Spin Distribution and Electronic Properties in FeN4-Graphene Catalysts with Edge Terminations

Understanding the spin distribution in FeN4-doped graphene nanoribbons with zigzag and armchair terminations is crucial for tuning the electronic properties of graphene-supported non-platinum catalysts. Since the spin-polarized carbon and iron electronic states may act together to change the electronic properties of the doped graphene, we provide in this work a systematic evaluation using a periodic density-functional theory-based method of the variation of spin-moment distribution and electronic properties with the position and orientation of the FeN4 defects, and the edge terminations of the graphene nanoribbons. Antiferromagnetic and ferromagnetic spin ordering of the zigzag edges were considered. We reveal that the electronic structures in both zigzag and armchair geometries are very sensitive to the location of FeN4 defects, changing from semi-conducting (in-plane defect location) to half-metallic (at-edge defect location). The introduction of FeN4 defects at edge positions cancels the known dependence of the magnetic and electronic proper-ties of undoped graphene nanoribbons on their edge geometries. The implications of the reported results for catalysis are also discussed in view of the presented electronic and magnetic properties.

Influence of ab initio derived site-dependent hopping parameters on electronic transport in graphene nanoribbons

Graphene Nano Ribbons (GNRs) have been studied extensively due to their potential applications in electrical transport, optical devices, etc. The Tight Binding (TB) model is a common method used to theoretically study the properties of GNRs. However, the hopping parameters of two-dimensional graphene (2DG) are often used as the hopping parameters of the TB model of GNRs, which may lead to inaccuracies in the prediction of GNRs. In this work, we calculated the site-dependent hopping parameters from density functional theory and construction of Wannier orbitals for use in a realistic TB model. It has been found that due to the edge effect, the hopping parameters of edge C atoms are markedly different from the bulk part, which is prominently observed in narrow GNRs. Compared to graphene, the change of hopping parameter of edge C atoms of zigzag GNRs (ZGNRs) and armchair GNRs (AGNRs) is as high as 0.11 and 0.08 eV, respectively. Moreover, we investigated the impact of the calculated site-dependent (SD) hopping parameters on the electronic transport properties of GNRs in the absence and presence of the perpendicular electric field and dilute charged impurities using the Green function approach, Landauer-Büttiker formalism and self-consistent Born approximation. We find an electron-hole asymmetry in the electronic structure and transport properties of ZGNRs with SD hopping parameters. Furthermore, AGNRs with SD hopping energies show a band gap regardless of their width, while AGNRs with 2DG hopping parameters exhibit metallic or semiconductor phases depending on their width. In addition, electric field-induced 4-ZGNR with SD hopping parameters undergoes a metallic to n-doped semiconducting phase transition whereas for 4-ZGNR with 2DG hopping parameters and 8-AGNRs with 2DG or SD hopping parameters, the application of an electric field opens the band gap in both conduction and valence bands simultaneously. Our findings provide evidence for the electron-hole symmetry breaking in ZGNR with SD hopping parameters and make ZGNRs a suitable candidate in valleytronic devices.

Enriching 2D transition metal borides via MB XMenes (M = Fe, Co, Ir): Strong correlation and magnetism

Recently, two-dimensional (2D) FeSe-like anti-MXenes (or XMenes), composed of late d-block transition metal M and p-block nonmetal X elements, have been both experimentally and theoretically investigated. Here, we select three 2D borides FeB, CoB and IrB for a deeper investigation by including strong correlation effects, as a fertile ground for understanding and applications. Using a combination of Hubbard corrected first-principles calculations and Monte Carlo simulations, FeB and CoB are found to be ferro- and anti-ferro magnetic, contrasting with the non-magnetic nature of IrB. The metallic FeB XMene monolayer, superior to most of the MXenes or MBenes, exhibits robust ferromagnetism, driven by intertwined direct-exchange and super-exchange interactions between adjacent Fe atoms. The predicted Curie temperature (TC) of the FeB monolayer via the Heisenberg model reaches an impressive 425 K, with the easy-axis oriented out-of-plane and high magnetic anisotropic energy (MAE). The asymmetry in the spin-resolved transmission spectrum induces a thermal spin current, providing an opportunity for spin filtration. This novel 2D FeB material is expected to hold great promise as an information storage medium and find applications in emerging spintronic devices.

Electrically induced net magnetization in FePSe3 nanoribbons: the role of edge reconstructions

Magnetized edge states of nanoribbon systems open a new path for designing functional spintronic devices. Here, we introduce a general mechanism for electrically generating nonzero net magnetization in antiferromagnetic (AFM) semiconducting nanoribbons. In the proposed spin configuration, in which the empty and occupied edge states of one side close to the Fermi energy are in the same spin channel, the Zeeman-type spin splitting between the states of opposite edges arising from the electric field allow the system to be tuned from the AFM semiconducting phase to the ferromagnetic (FM) metallic phase, yielding nonzero net magnetization. Our ab initio calculations show that this strategy is realizable in the example of the FePSe3 nanoribbon, in which self-passivation-driven reconstruction at the Se termination edge gives rise to the key spin configuration. Moreover, we demonstrate that an electric field could trigger a series of electronic phase transitions among AFM semiconductor, AFM half-metal, and FM metal phases, based on which we were able to design an electronically controllable versatile spintronics device.

First-principles study of indium nitride monolayers doped with alkaline earth metals

Element doping has been widely employed to modify the ground state properties of two-dimensional (2D) materials. In this work, the effects of doping with alkaline earth metals (AEMs) on the structural, electronic, and magnetic properties of indium nitride (InN) monolayers are investigated using first-principles calculations based on density functional theory. In a graphene-like honeycomb structure, the InN monolayer possesses good dynamical and thermal stability, and exhibits an indirect gap semiconductor character with a band gap of 0.37 (1.48) eV as determined by using the PBE(HSE06) functional. A single In vacancy leads to the emergence of a magnetic semiconductor character, where magnetic properties with a large total magnetic moment of 3.00 μB are produced mainly by the N atoms closest to the defect site. The incorporation of AEMs impurities causes local structural distortion due to the difference in atomic size, where Mg and Ca doping processes are energetically most favorable. Half-metallicity is induced by the partial occupancy of the N-2p orbital, which is a consequence of having one valence electron less. In these cases, the total magnetic moment of 1.00 μB mainly originates from N atoms neighboring the dopants. Further increasing the doping level preserves the half-metallic character, where N atoms play a key role on the magnetism of the highly doped systems. Results presented herein suggest the In replacement by AEMs impurities is an effective approach to make prospective spintronic 2D materials from InN monolayers.

Light-induced pure spin current in carbon hexagonal-connected zigzag graphene nanoribbons via magnetic field modulation

Pure spin current, exhibiting no Joule heat and self-powered characteristics, has recently attracted intensive attention. Here, through first-principles calculations and symmetry analysis, we propose a new method to generate photoelectric pure spin current in carbon hexagonal connected three zigzag graphene nanoribbons (ZGNRs) via magnetic field modulation. Specifically, a device with centro-symmetry is designed, which consists of three ZGNRs using two carbon hexagons as connectors ('2-C6'). When the edge spin states of the three ZGNRs from left to right are modulated to AFM-AFM-AFM or FM-AFM-FM by magnetic fields, excellent pure spin currents are obtained which are independent of the photon energy and the angle of the linearly polarized light. However, when the edge spin states are FM-FM-FM orderly, the photocurrent is nearly zero and can be neglected. Analysis show that the first two spin magnetic structures own the spatial inversion antisymmetric spin density which is the origin of stable pure spin currents, while the FM-FM-FM structure owns Cs symmetric spin density, leading to the nearly zero photocurrent. Our findings provide a scheme for obtaining pure spin currents by changing the spin states of the graphene nanoribbons via magnetic field modulation, which is of great importance for the design of spintronic devices.

Detecting the spin-polarization of edge states in graphene nanoribbons

Low dimensional carbon-based materials can show intrinsic magnetism associated to p-electrons in open-shell π-conjugated systems. Chemical design provides atomically precise control of the π-electron cloud, which makes them promising for nanoscale magnetic devices. However, direct verification of their spatially resolved spin-moment remains elusive. Here, we report the spin-polarization of chiral graphene nanoribbons (one-dimensional strips of graphene with alternating zig-zag and arm-chair boundaries), obtained by means of spin-polarized scanning tunnelling microscopy. We extract the energy-dependent spin-moment distribution of spatially extended edge states with π-orbital character, thus beyond localized magnetic moments at radical or defective carbon sites. Guided by mean-field Hubbard calculations, we demonstrate that electron correlations are responsible for the spin-splitting of the electronic structure. Our versatile platform utilizes a ferromagnetic substrate that stabilizes the organic magnetic moments against thermal and quantum fluctuations, while being fully compatible with on-surface synthesis of the rapidly growing class of nanographenes.

Edge-Confined Excitons in Monolayer Black Phosphorus

Quantum confinement of two-dimensional excitons in van der Waals materials via electrostatic trapping, lithographic patterning, Moiré potentials, and chemical implantation has enabled significant advances in tailoring light emission from nanostructures. While such approaches rely on complex preparation of materials, natural edges are a ubiquitous feature in layered materials and provide a different approach for investigating quantum-confined excitons. Here, we observe that certain edge sites of monolayer black phosphorus (BP) strongly localize the intrinsic quasi-one-dimensional excitons, yielding sharp spectral lines in photoluminescence, with nearly an order of magnitude line width reduction. Through structural characterization of BP edges using transmission electron microscopy and first-principles GW plus Bethe-Salpeter equation (GW-BSE) calculations of exemplary BP nanoribbons, we find that certain atomic reconstructions can strongly quantum-confine excitons resulting in distinct emission features, mediated by local strain and screening. We observe linearly polarized luminescence emission from edge reconstructions that preserve the mirror symmetry of the parent BP lattice, in agreement with calculations. Furthermore, we demonstrate efficient electrical switching of localized edge excitonic luminescence, whose sites act as excitonic transistors for emission. Localized emission from BP edges motivates exploration of nanoribbons and quantum dots as hosts for tunable narrowband light generation, with future potential to create atomic-like structures for quantum information processing applications as well as exploration of exotic phases that may reside in atomic edge structures.

Electronic properties and carrier mobilities of nanocarbons formed by non-benzoidal building blocks

Exotic 1D and 2D carbon nanostructures have been grown in the laboratory in the last few years by means of surface-assisted chemical routes. In these processes, the strategical choice of a molecular precursor plays a dominant role in the determination of the synthesized nanocarbon. Further variations of these techniques are able to produce non-benzoidal carbon quantum-dots (QDs). Considering this experimental scenario as motivation, we propose a series of nanoribbon systems based on concatenating recently synthesized carbon QDs containing pentagonal, hexagonal, and heptagonal rings. We use density functional theory (DFT) simulations to reveal their properties can range from metallic to semiconducting depending on the concatenation hierarchy used to form the nanoribbons. This DFT implementation is based on a LCAO approach to describe valence wavefunctions and most of the simulations employ the PBE-GGA functional. Since this functional is known to underestimate band gaps, we also use the B3LYP functional in a plane-wave DFT approach for a selected case for comparison purposes. These systems show a different gap versus width relationship compared to conventional graphene nanoribbons setups and a particular set of carrier mobility values. We further discuss the interplay between the QD's frontier states and the electronic properties of the nanoribbons in light of their structural details.

On-Surface Synthesis of Graphene Nanoribbons with Atomically Precise Structural Heterogeneities and On-Site Characterizations

Graphene nanoribbons (GNRs) are strips of graphene, with widths of a few nanometers, that are promising candidates for future applications in nanodevices and quantum information processing due to their highly tunable structure-dependent electronic, spintronic, topological, and optical properties. Implantation of periodic structural heterogeneities, such as heteroatoms, nanopores, and non-hexagonal rings, has become a powerful manner for tailoring the designer properties of GNRs. The bottom-up synthesis approach, by combining on-surface chemical reactions based on rationally designed molecular precursors and in situ tip-based microscopic and spectroscopic techniques, promotes the construction of atomically precise GNRs with periodic structural modulations. However, there are still obstacles and challenges lying on the way toward the understanding of the intrinsic structure-property relations, such as the strong screening and Fermi level pinning effect of the normally used transition metal substrates and the lack of collective tip-based techniques that can cover multi-internal degrees of freedom of the GNRs. In this Perspective, we briefly review the recent progress in the on-surface synthesis of GNRs with diverse structural heterogeneities and highlight the structure-property relations as characterized by the noncontact atomic force microscopy and scanning tunneling microscopy/spectroscopy. We furthermore motivate to deliver the need for developing strategies to achieve quasi-freestanding GNRs and for exploiting multifunctional tip-based techniques to collectively probe the intrinsic properties.

Two-dimensional superhard silicon nitrides with widely tunable bandgap, high carrier mobility and hole-doping-induced robust magnetism

The search for new forms of the traditional bulk materials to enrich their interactions and properties is an attractive subject in two-dimensional (2D) materials. In this work, novel tetra-hexa-mixed coordinated 2D silicon nitrides (Si3N4) and their analogues are systematically investigated via density functional theory. The results show the global minimum 2D structure, Si3N4 (T-aa), is a highly chemically and thermally stable superhard semiconductor with a wide indirect bandgap (about 6.0 eV), which is widely adjustable under both biaxial strain and vertical electric field. It also possesses anisotropic high carrier mobility, up to 5490 cm2 V-1 s-1 at room temperature. Besides, its nitride analogues of group IVA (Si, Ge, Sn, and Pb) exhibit diverse electronic structures with regular bandgap distribution. Remarkably, some nitride analogues display linearly increasing robust magnetism with hole doping. The theoretical Curie temperatures of Si3N4 and Sn3N4 with hole doping (1h+ per unit cell) are 298 and 180 K, respectively. The Si3N4 (T-aa) and its analogues have a variety of excellent properties to be potentially applied in various fields, e.g., semiconductor electronics, spintronics, high-temperature structural materials, and superhard materials.

The effect of light-irradiated area on the spin dependent photocurrent in zigzag graphene nanoribbon junctions

In this work, we study the photogalvanic effect of a zigzag graphene nanoribbon junction with a centro-symmetrical structure which consists of 8 zigzag chains by density functional calculations. Specifically, we focus on the cases where the irradiated region is just part of the central region and located at different positions, with an aim to see how the spin dependent photocurrents will change and whether pure spin current can be obtained. It is found that the magnitude of the spin-dependent photocurrents increases with a gradual increase of the irradiated region and pure spin current is achieved when and only when the entire central region is irradiated. In addition, we studied the additive effect in this device to see that if we divide the central region into two parts, whether the sum of the spin current generated by irradiating the two parts individually is equal to that produced when the entire central region is irradiated. It is found that the sum of the spin currents produced by irradiating the two parts individually is smaller than that obtained by irradiating the whole central region, which means that the rule of "1 + 2 = 3" does not hold and the coupling effect between the two parts is important in photocurrent generation.

A metal-free photoactive nitrogen-doped carbon nanosolenoid with broad absorption in visible region for efficient photocatalysis

Riemann surfaces inspired chemists to design and synthesize such multidimensional curved carbon architectures. It has been predicted that carbon nanosolenoid materials with Riemann surfaces have unique structures and novel physical properties. Here we report the first synthesis of a nitrogen-doped carbon nanosolenoid (N-CNS) using bottom-up approach with a well-defined structure. N-CNS was obtained by a rational Suzuki polymerization, followed by oxidative cyclodehydrogenation. The successful synthesis of N-CNS was fully characterized by GPC, FTIR, solid-state 13C NMR and Raman techniques. The intrinsic single-strand molecular structures of N-CNS helices can be clearly resolved using low-dose integrated differential phase contrast scanning transmission electron microscopy (iDPC-STEM) technique. Possessing unique structural and physical properties, this long π-extended polymer N-CNS can provide new insight towards bottom-up syntheses of curved nanoribbons and potential applications as a metal-free photocatalyst for visible-light-driven H2 evolution and highly efficient photocatalyst for photoredox organic transformations.

Circumpentacene with Open-Shell Singlet Diradical Character

Circumacenes (CAs) are a distinctive type of benzenoid polycyclic aromatic hydrocarbons where an acene unit is completely enclosed by a layer of outer fused benzene rings. Despite their unique structures, the synthesis of CAs is challenging, and until recently, the largest CA molecule synthesized was circumanthracene. In this study, we report the successful synthesis of an extended circumpentacene derivative 1, which represents the largest CA molecule synthesized to date. Its structure was confirmed by X-ray crystallographic analysis and its electronic properties were systematically investigated by both experiments and theoretical calculations. It shows a unique open-shell diradical character due to the existence of extended zigzag edges, with a moderate diradical character index (y0 =39.7 %) and a small singlet-triplet energy gap (ΔES-T =-4.47 kcal/mol). It exhibits a dominant local aromatic character with π-electrons delocalized in the individual aromatic sextet rings. It has a small HOMO-LUMO energy gap and displays amphoteric redox behavior. The electronic structures of its dication and dianion can be considered as doubly charged structures in which two coronene units are fused with a central aromatic benzene ring. This study provides a new route toward stable multizigzag-edged graphene-like molecules with open-shell di/polyradical character.

MoRe Electrodes with 10 nm Nanogaps for Electrical Contact to Atomically Precise Graphene Nanoribbons

Atomically precise graphene nanoribbons (GNRs) are predicted to exhibit exceptional edge-related properties, such as localized edge states, spin polarization, and half-metallicity. However, the absence of low-resistance nanoscale electrical contacts to the GNRs hinders harnessing their properties in field-effect transistors. In this paper, we make electrical contact with nine-atom-wide armchair GNRs using superconducting alloy MoRe as well as Pd (as a reference), which are two of the metals providing low-resistance contacts to carbon nanotubes. We take a step toward contacting a single GNR by fabricating electrodes with needlelike geometry, with about 20 nm tip diameter and 10 nm separation. To preserve the nanoscale geometry of the contacts, we develop a PMMA-assisted technique to transfer the GNRs onto the prepatterned electrodes. Our device characterizations as a function of bias voltage and temperature show thermally activated gate-tunable conductance in GNR-MoRe-based transistors.

Electronic Structure Modulation of Nanographenes for Second Order Nonlinear Optical Molecular Materials

Nanographenes (NGs) have drawn extensive attention as promising candidates for next-generation optoelectronic and nonlinear optical (NLO) materials, owing to its unique optoelectronic properties and high thermal stability. However, the weak polarity or even non-polarity of NGs (resulting in weak even order NLO properties) and the high chemical reactivity of zigzag edged NGs hinder their further applications in nonlinear optics, thus stabilization (lowering the chemical reactivity) and polarizing the charge distribution in NGs are necessary for such applications of NGs. The fusion of heptagon and pentagon endows the azulene with the character of donor-acceptor, and the B=N unit is isoelectronic to C=C unit. The introduction of polar azulene and BN are idea to polarize and stabilize the electronic structure of NGs for NLO applications. In the present review, a survey on the functionalization and applications of NGs in nonlinear optics is conducted. The engineering of the electronic structure of NGs by topological defects, doping and edge modulation is summarized. Finally, a summary of challenges and perspectives for carbon-based NLO nanomaterials is presented.

Dirac Half-Semimetallicity and Antiferromagnetism in Graphene Nanoribbon/Hexagonal Boron Nitride Heterojunctions

Half-metals have been envisioned as active components in spintronic devices by virtue of their completely spin-polarized electrical currents. Actual materials hosting half-metallic phases, however, remain scarce. Here, we predict that recently fabricated heterojunctions of zigzag nanoribbons embedded in two-dimensional hexagonal boron nitride are half-semimetallic, featuring fully spin-polarized Dirac points at the Fermi level. The half-semimetallicity originates from the transfer of charges from hexagonal boron nitride to the embedded graphene nanoribbon. These charges give rise to opposite energy shifts of the states residing at the two edges, while preserving their intrinsic antiferromagnetic exchange coupling. Upon doping, an antiferromagnetic-to-ferrimagnetic phase transition occurs in these heterojunctions, with the sign of the excess charge controlling the spatial localization of the net magnetic moments. Our findings demonstrate that such heterojunctions realize tunable one-dimensional conducting channels of spin-polarized Dirac fermions seamlessly integrated into a two-dimensional insulator, thus holding promise for the development of carbon-based spintronics.

Photonic Realization of a Generic Type of Graphene Edge States Exhibiting Topological Flat Band

Cutting a honeycomb lattice (HCL) ends up with three types of edges (zigzag, bearded, and armchair), as is well known in the study of graphene edge states. Here, we propose and demonstrate a distinctive twig-shaped edge, thereby observing new edge states using a photonic platform. Our main findings are (i) the twig edge is a generic type of HCL edge complementary to the armchair edge, formed by choosing the right primitive cell rather than simple lattice cutting or Klein edge modification; (ii) the twig edge states form a complete flat band across the Brillouin zone with zero-energy degeneracy, characterized by nontrivial topological winding of the lattice Hamiltonian; (iii) the twig edge states can be elongated or compactly localized at the boundary, manifesting both flat band and topological features. Although realized here in a photonic graphene, such twig edge states should exist in other synthetic HCL structures. Moreover, our results may broaden the understanding of graphene edge states, as well as new avenues for realization of robust edge localization and nontrivial topological phases based on Dirac-like materials.

The spin caloritronic transport properties of newly designed devices consisting of a sawtooth graphene nanoribbon and its derived five-member ring structure

Achieving high spin polarization transport and a pure spin current is particularly desired in spintronics. We use a sawtooth graphene nanoribbon (STGNR) and its derived five-member ring structure (5-STGNR) to design new spin caloritronic devices, since they have been successfully prepared experimentally and have an interface with no lattice distortion. By using first-principle calculations combined with the non-equilibrium Green's function approach, we have studied the spin caloritronic transport properties of several STGNR-based devices, including the structures with symmetrical and asymmetrical edges, and found some excellent spin caloritronic properties, such as spin polarization, magnetoresistance and the spin Seebeck effect. By introducing a temperature difference, giant magnetoresistance and spin Seebeck effects are achieved in a heterojunction with a symmetrical edge, whereas spin polarization is more effective in a heterojunction with an asymmetrical edge. Meanwhile, the metal-semiconductor-metal junction, which is composed of STGNRs with a symmetrical edge, exhibits approximately 100% spin polarization and produces a perfect thermally induced pure spin current at room temperature. Our results indicate that the devices consisting of a sawtooth graphene nanoribbon and its derived five-member ring structure are promising novel spin caloritronic devices.

Ferromagnetic and half-metallic phase transition by doping in a one-dimensional narrow-bandgap W6PCl17 semiconductor

Based on first-principles calculations, we predict a one-dimensional (1D) semiconductor with cluster-type structure, namely phosphorus-centered tungsten chloride W6PCl17. The corresponding single-chain system can be prepared from its bulk counterpart by an exfoliation method and it exhibits good thermal and dynamical stability. 1D single-chain W6PCl17 is a narrow direct semiconductor with a bandgap of 0.58 eV. The unique electronic structure endows single-chain W6PCl17 with the p-type transport characteristic, manifested as a large hole mobility of 801.53 cm2 V-1 s-1. Remarkably, our calculations show that electron doping can easily induce itinerant ferromagnetism in single-chain W6PCl17 due to the extremely flat band feature near the Fermi level. Such ferromagnetic phase transition expectedly occurs at an experimentally achievable doping concentration. Importantly, a saturated magnetic moment of 1μB per electron is obtained over a large range of doping concentrations (from 0.02 to 5 electrons per formula unit), accompanied by the stable existence of half-metallic characteristics. A detailed analysis of the doping electronic structures indicates that the doping magnetism is mainly contributed by the d orbitals of partial W atoms. Our findings demonstrate that single-chain W6PCl17 is a typical 1D electronic and spintronic material expected to be synthesized experimentally in the future.

Ab initio study of water anchored in graphene pristine and vacancy-type defects

CONTEXT

In this paper, we have addressed two issues that are relevant to the interaction of water in pristine and vacant graphene through first-principles calculations based on the Density Functional Theory (DFT). The results showed that for the interaction of pristine graphene with water, the DOWN configuration (with the hydrogen atoms facing downwards) was the most stable, presenting binding energies in the order of -13.62 kJ/mol at a distance of 2.375 Å in the TOP position. We also evaluated the interaction of water with two vacancy models, removing one carbon atom (Vac-1C) and four atoms (Vac-4C). In the Vac-1C system, the most favourable system was the DOWN configuration, with binding energies ranging from -20.60 kJ/mol to -18.41 kJ/mol in the TOP and UP positions, respectively. A different behaviour was observed for the interaction of water with Vac-4C; regardless of the configuration of the water, it is always more favourable for the interaction to occur through the vacancy centre, with binding energies ​​between -13.28 kJ/mol and -20.49 kJ/mol. Thus, the results presented open perspectives for the technological development of nanomembranes as well as providing a better understanding of the wettability effects of graphene sheets, whether pristine or with defects.

METHOD

We evaluated the interaction of pristine and vacant graphene with the water molecule, through calculations based on Density Functional Theory (DFT); implemented by the SIESTA program. The electronic, energetic, and structural properties were analyzed by solving self-consistent Kohn-Sham equations. In all calculations, a double ζ plus a polarized function (DZP) was used for the numerical baise set. Local Density Approximation (LDA) with the Perdew and Zunger (PZ) parameterisation along with a basis set superposition error (BSSE) correction were used to describe the exchange and correlation potential (Vxc). The water and isolated graphene structures were relaxed until the residual forces were less than 0.05 eV/Å^-1 in all atomic coordinates.

Theoretical insights into the methane catalytic decomposition on graphene nanoribbons edges

Catalytic methane decomposition (CMD) is receiving much attention as a promising application for hydrogen production. Due to the high energy required for breaking the C-H bonds of methane, the choice of catalyst is crucial to the viability of this process. However, atomistic insights for the CMD mechanism on carbon-based materials are still limited. Here, we investigate the viability of CMD under reaction conditions on the zigzag (12-ZGNR) and armchair (AGRN) edges of graphene nanoribbons employing dispersion-corrected density functional theory (DFT). First, we investigated the desorption of H and H₂ at 1200 K on the passivated 12-ZGNR and 12-AGNR edges. The diffusion of hydrogen atom on the passivated edges is the rate determinant step for the most favourable H₂ desorption pathway, with a activation free energy of 4.17 eV and 3.45 eV on 12-ZGNR and 12-AGNR, respectively. The most favourable H₂ desorption occurs on the 12-AGNR edges with a free energy barrier of 1.56 eV, reflecting the availability of bare carbon active sites on the catalytic application. The direct dissociative chemisorption of CH₄ is the preferred pathway on the non-passivated 12-ZGNR edges, with an activation free energy of 0.56 eV. We also present the reaction steps for the complete catalytic dehydrogenation of methane on 12-ZGNR and 12-AGNR edges, proposing a mechanism in which the solid carbon formed on the edges act as new active sites. The active sites on the 12-AGNR edges show more propensity to be regenerated due lower free energy barrier of 2.71 eV for the H₂ desorption from the newly grown active site. Comparison is made between the results obtained here and experimental and computational data available in the literature. We provide fundamental insights for the engineering of carbon-based catalysts for the CMD, showing that the bare carbon edges of graphene nanoribbons have performance comparable to commonly used metallic and bi-metallic catalysts for methane decomposition.

Effects of Coulomb Blockade on the Charge Transport through the Topological States of Finite Armchair Graphene Nanoribbons and Heterostructures

In this study, we investigate the charge transport properties of semiconducting armchair graphene nanoribbons (AGNRs) and heterostructures through their topological states (TSs), with a specific focus on the Coulomb blockade region. Our approach employs a two-site Hubbard model that takes into account both intra- and inter-site Coulomb interactions. Using this model, we calculate the electron thermoelectric coefficients and tunneling currents of serially coupled TSs (SCTSs). In the linear response regime, we analyze the electrical conductance (Ge), Seebeck coefficient (S), and electron thermal conductance (κe) of finite AGNRs. Our results reveal that at low temperatures, the Seebeck coefficient is more sensitive to many-body spectra than electrical conductance. Furthermore, we observe that the optimized S at high temperatures is less sensitive to electron Coulomb interactions than Ge and κe. In the nonlinear response regime, we observe a tunneling current with negative differential conductance through the SCTSs of finite AGNRs. This current is generated by electron inter-site Coulomb interactions rather than intra-site Coulomb interactions. Additionally, we observe current rectification behavior in asymmetrical junction systems of SCTSs of AGNRs. Notably, we also uncover the remarkable current rectification behavior of SCTSs of 9-7-9 AGNR heterostructure in the Pauli spin blockade configuration. Overall, our study provides valuable insights into the charge transport properties of TSs in finite AGNRs and heterostructures. We emphasize the importance of considering electron-electron interactions in understanding the behavior of these materials.

Recent advances in modification of novel carbon-based composites: Synthesis, properties, and biotechnological/ biomedical applications

Nowadays, carbon-based materials owing to great interest in biomedical science/biotechnology and applied for effective diagnosis and treatment of disease. To enhance the effectiveness of carbon nanotubes (CNTs)/graphene-based materials for bio-medical science/technology applications, different kinds of surface modification/functionalization were developed for the attachment of metal oxides nanostructures, biomolecules and polymers. The attachment of pharmaceutical agents with CNTs/graphene, make it a favorable candidate in research field of bio-medical science/technology applications. Surface modified/functionalized CNTs and graphene derivatives materials integrated with pharmaceutical agents has been developed for the purpose of cancer therapy, antibacterial action, pathogens bio detection, drug and gene delivery. Surface modification or functionalization of CNT/graphene materials provides good platform for pharmaceutical agents attachment with improved surface Raman scattering, fluorescence and its quenching capability. Graphene-based biosensing and bioimaging technologies are widely applied to identify numerous trace level analytes. These fluorescent and electrochemical sensors are utilized primarily for detecting organic, inorganic, and biomolecules. In this article, we highlights and summarized overview of the current research progress concerned on the CNTs/graphene-based materials as a new generation materials for detection and treatment of diseases.

Grain Size Engineering of CVD-Grown Large-Area Graphene Films

Graphene, a single atomic layer of graphitic carbon, has attracted much attention because of its outstanding properties hold great promise for a wide range of technological applications. Large-area graphene films (GFs) grown by chemical vapor deposition (CVD) are highly desirable for both investigating their intrinsic properties and realizing their practical applications. However, the presence of grain boundaries (GBs) has significant impacts on their properties and related applications. According to the different grain sizes, GFs can be divided into polycrystalline, single-crystal, and nanocrystalline films. In the past decade, considerable progress has been made in engineering the grain sizes of GFs by modifying the CVD processes or developing some new growth approaches. The key strategies involve controlling the nucleation density, growth rate, and grain orientation. This review aims to provide a comprehensive description of grain size engineering research of GFs. The main strategies and underlying growth mechanisms of CVD-grown large-area GFs with nanocrystalline, polycrystalline, and single-crystal structures are summarized, in which the advantages and limitations are highlighted. In addition, the scaling law of physical properties in electricity, mechanics, and thermology as a function of grain sizes are briefly discussed. Finally, the perspectives for challenges and future development in this area are also presented.

On using non-Kekulé triangular graphene quantum dots for scavenging hazardous sulfur hexafluoride components

The goal of present study is to explore how the size and functionalization of graphene quantum dots (GQDs) affect their sensing capabilities. Specifically, we investigated the adsorption of SO₂, SOF₂, SO₂F₂, and SF₆ on GQDs that were functionalized with -CH₃, -COCH₃, and -NH₂. We used density functional theory to analyse the electronic properties of these functionalized GQDs and found that the functionalization significantly altered their electronic properties. For example, the B3LYP H-L gap of pristine triangulene was 3.9eV, while the H-L gap of functionalized triangulene ranged from 2.8 eV to 3.6 eV (using the B3LYP functional). Our results indicate that -NH₂ functionalized phenalenyl and triangulene provide strong interaction with SO₂, with adsorption energies of -0.429 eV and -0.427 eV, respectively. These adsorption properties exhibit physisorption, leading to high gas sensitivity and superior recovery time. The findings of this study provide new insights into the potential use of GQDs for detecting the decomposed constituents of sulfur hexafluoride, which can be beneficial for assessing the operation status of SF₆ insulated devices. Overall, our calculations suggest that functionalized GQDs can be employed in gas insulated systems for partial discharge detection.

The Efficiency Study of Graphene Synthesis on Copper Substrate via Chemical Vapor Deposition Method with Methanol Precursor

Few-layer graphene was successfully synthesized on copper foil via chemical vapor deposition with methanol as a carbon source. This was confirmed by optical microscopy observation, Raman spectra measurement, I_2D/I_G ratio calculation, and 2D-FWHM value comparisons. Monolayer graphene was also found in similar standard procedures, but it required higher growth temperature and longer time periods. The cost-efficient growth conditions for few-layer graphene are thoroughly discussed via TEM observation and AFM measurement. In addition, it has been confirmed that the growth period can be shortened by increasing growth temperature. With the H₂ gas flow rate fixed at 15 sccm, few-layer graphene was synthesized at the lower growth temperature of 700 °C in 30 min, and at 900 °C growth temperature in only 5 min. Successful growth was also achieved without adding hydrogen gas flow; this is probably because H₂ can be induced from the decomposition of methanol. Through further defects study of few-layer graphene via TEM observation and AFM measurement, we tried to find possible ways for efficiency and quality management in graphene synthesis in industrial applications. Lastly, we investigated graphene formation after pre-treatment with different gas compositions, and found that gas selection is a crucial factor for a successful synthesis.