Self-organization of microtubule bundles in anucleate fission yeast cells

Bqt4 affects relative movement between SPB and nucleolus in fission yeast

Movement dynamics in the nucleus involve various biological processes, including DNA repair, which is crucial for cancer prevention. Changes in the movement of the components of the nucleus indicate the changes in movement dynamics in the nucleus. In Schizosaccharomyces pombe, the inner nuclear membrane protein Bqt4 plays an essential role in attaching telomeres to the nuclear envelope. We observed that the deletion of bqt4+ caused a significant decrease in the mean square displacement (MSD) calculated from the distance between the nucleolar center and spindle pole body (SPB), hereafter referred to as MSD(SPB-Nucleolus). The MSD(SPB-Nucleolus) decrease in bqt4Δ was microtubule-dependent. The Rap1-binding ability loss mutant, bqt4F46A, and nonspecific DNA-binding ability mutants, bqt43E-A, did not exhibit an MSD(SPB-Nucleolus) decrease compared to the WT. Moreover, the bqt43E-Arap1Δ double mutant and 1-262 amino acids truncated mutant bqt4ΔN (263-432), which does not have either Rap1-binding or nonspecific DNA-binding abilities, did not exhibit the MSD(SPB-Nucleolus) decrease to the same extent as bqt4Δ. These results suggest that the unknown function of Bqt4 in the C-terminal domain is essential for the maintenance of the pattern of relative movement between SPB and the nucleolus.

Design principles of Cdr2 node patterns in fission yeast cells

Pattern-forming networks have diverse roles in cell biology. Rod-shaped fission yeast cells use pattern formation to control the localization of mitotic signaling proteins and the cytokinetic ring. During interphase, the kinase Cdr2 forms membrane-bound multiprotein complexes termed nodes, which are positioned in the cell middle due in part to the node inhibitor Pom1 enriched at cell tips. Node positioning is important for timely cell cycle progression and positioning of the cytokinetic ring. Here, we combined experimental and modeling approaches to investigate pattern formation by the Pom1-Cdr2 system. We found that Cdr2 nodes accumulate near the nucleus, and Cdr2 undergoes nucleocytoplasmic shuttling when cortical anchoring is reduced. We generated particle-based simulations based on tip inhibition, nuclear positioning, and cortical anchoring. We tested model predictions by investigating Pom1-Cdr2 localization patterns after perturbing each positioning mechanism, including in both anucleate and multinucleated cells. Experiments show that tip inhibition and cortical anchoring alone are sufficient for the assembly and positioning of nodes in the absence of the nucleus, but that the nucleus and Pom1 facilitate the formation of unexpected node patterns in multinucleated cells. These findings have implications for spatial control of cytokinesis by nodes and for spatial patterning in other biological systems.

Design principles of Cdr2 node patterns in fission yeast cells

Pattern forming networks have diverse roles in cell biology. Rod-shaped fission yeast cells use pattern formation to control the localization of mitotic signaling proteins and the cytokinetic ring. During interphase, the kinase Cdr2 forms membrane-bound multiprotein complexes termed nodes, which are positioned in the cell middle due in part to the node inhibitor Pom1 enriched at cell tips. Node positioning is important for timely cell cycle progression and positioning of the cytokinetic ring. Here, we combined experimental and modeling approaches to investigate pattern formation by the Pom1-Cdr2 system. We found that Cdr2 nodes accumulate near the nucleus, and Cdr2 undergoes nucleocytoplasmic shuttling when cortical anchoring is reduced. We generated particle-based simulations based on tip inhibition, nuclear positioning, and cortical anchoring. We tested model predictions by investigating Pom1-Cdr2 localization patterns after perturbing each positioning mechanism, including in both anucleate and multinucleated cells. Experiments show that tip inhibition and cortical anchoring alone are sufficient for the assembly and positioning of nodes in the absence of the nucleus, but that the nucleus and Pom1 facilitate the formation of unexpected node patterns in multinucleated cells. These findings have implications for spatial control of cytokinesis by nodes and for spatial patterning in other biological systems.

Cytokinesis in Trypanosoma brucei relies on an orphan kinesin that dynamically crosslinks microtubules

Many single-celled eukaryotes have complex cell morphologies defined by microtubules arranged into higher-order structures. The auger-like shape of the parasitic protist Trypanosoma brucei (T. brucei) is mediated by a parallel array of microtubules that underlies the plasma membrane. The subpellicular array must be partitioned and segregated using a microtubule-based mechanism during cell division. We previously identified an orphan kinesin, KLIF, that localizes to the ingressing cleavage furrow and is essential for the completion of cytokinesis. We have characterized the biophysical properties of a truncated KLIF construct in vitro to gain mechanistic insight into the function of this novel kinesin. We find that KLIF is a non-processive dimeric kinesin that dynamically crosslinks microtubules. Microtubules crosslinked by KLIF in an antiparallel orientation are translocated relative to one another, while microtubules crosslinked parallel to one another remain static, resulting in the formation of organized parallel bundles. In addition, we find that KLIF stabilizes the alignment of microtubule plus ends. These features provide a mechanistic understanding for how KLIF functions to form a new pole of aligned microtubule plus ends that defines the shape of the new cell posterior, which is an essential requirement for the completion of cytokinesis in T. brucei.

Escape from mitotic catastrophe by actin-dependent nuclear displacement in fission yeast

Eukaryotic cells position the nucleus within the proper intracellular space, thereby safeguarding a variety of cellular processes. In fission yeast, the interphase nucleus is placed in the cell middle in a microtubule-dependent manner. By contrast, how the mitotic nucleus is positioned remains elusive. Here we show that several cell-cycle mutants that arrest in mitosis all displace the nucleus toward one end of the cell. Intriguingly, the actin cytoskeleton is responsible for nuclear movement. Time-lapse live imaging indicates that mitosis-specific F-actin cables possibly push the nucleus through direct interaction with the nuclear envelope, and subsequently actomyosin ring constriction further shifts the nucleus away from the center. This nuclear movement is beneficial, because if the nuclei were retained in the center, unseparated chromosomes would be intersected by the contractile actin ring and the septum, imposing the lethal cut phenotype. Thus, fission yeast escapes from mitotic catastrophe by means of actin-dependent nuclear movement.

•

Actin-dependent mitotic nuclear positioning in fission yeast

•

Actin cables and ring closure drive nuclear displacement upon mitotic arrest

•

Nuclear displacement evades cut-mediated cell death

•

Survivors resume cell division as diploids

Klp2 and Ase1 synergize to maintain meiotic spindle stability during metaphase I

The spindle apparatus segregates bi-oriented sister chromatids during mitosis but mono-oriented homologous chromosomes during meiosis I. It has remained unclear if similar molecular mechanisms operate to regulate spindle dynamics during mitosis and meiosis I. Here, we employed live-cell microscopy to compare the spindle dynamics of mitosis and meiosis I in fission yeast cells and demonstrated that the conserved kinesin-14 motor Klp2 plays a specific role in maintaining metaphase spindle length during meiosis I but not during mitosis. Moreover, the maintenance of metaphase spindle stability during meiosis I requires the synergism between Klp2 and the conserved microtubule cross-linker Ase1, as the absence of both proteins causes exacerbated defects in metaphase spindle stability. The synergism is not necessary for regulating mitotic spindle dynamics. Hence, our work reveals a new molecular mechanism underlying meiotic spindle dynamics and provides insights into understanding differential regulation of meiotic and mitotic events.

Cell-Cycle-Dependent Regulation of Translation: New Interpretations of Old Observations in Light of New Approaches

It is a long-standing view that global translation varies during the cell cycle and is much lower in mitosis than in other cell-cycle phases. However, the central papers in the literature are not in agreement about the extent of downregulation in mitosis, ranging from a dramatic decrease to only a marginal reduction. Herein, it is argued that the discrepancy derives from technical challenges. Cell-cycle-dependent variations are most conveniently studied in synchronized cells, but the synchronization methods by themselves often evoke stress responses that, in turn, affect translation rates. Further, it is argued that previously reported cell-cycle-dependent changes in the global translation rate to a large extent reflect responses to the synchronization methods. Recent findings strongly suggest that the global translation rate is not regulated in a cell-cycle-dependent manner. Novel techniques allowing a genome-wide analysis of translational profiles suggest that the extent and importance of selective translational regulation associated with cell-cycle transitions have been underestimated. Therefore, the main question is which messenger RNAs (mRNAs) are translated, rather than whether the global translation rate is decreased.

Two spatially distinct kinesin-14 proteins, Pkl1 and Klp2, generate collaborative inward forces against kinesin-5 Cut7 in S. pombe

Kinesin motors play central roles in bipolar spindle assembly. In many eukaryotes, spindle pole separation is driven by kinesin-5, which generates outward force. This outward force is balanced by antagonistic inward force elicited by kinesin-14 and/or dynein. In fission yeast, two kinesin-14 proteins, Pkl1 and Klp2, play an opposing role against the kinesin-5 motor protein Cut7. However, how the two kinesin-14 proteins coordinate individual activities remains elusive. Here, we show that although deletion of either pkl1 or klp2 rescues temperature-sensitive cut7 mutants, deletion of only pkl1 can bypass the lethality caused by cut7 deletion. Pkl1 is tethered to the spindle pole body, whereas Klp2 is localized along the spindle microtubule. Forced targeting of Klp2 to the spindle pole body, however, compensates for Pkl1 functions, indicating that cellular localizations, rather than individual motor specificities, differentiate between the two kinesin-14 proteins. Interestingly, human kinesin-14 (KIFC1 or HSET) can replace either Pkl1 or Klp2. Moreover, overproduction of HSET induces monopolar spindles, reminiscent of the phenotype of Cut7 inactivation. Taken together, this study has uncovered the biological mechanism whereby two different Kinesin-14 motor proteins exert their antagonistic roles against kinesin-5 in a spatially distinct manner.

Cell Polarity in Yeast

A conserved molecular machinery centered on the Cdc42 GTPase regulates cell polarity in diverse organisms. Here we review findings from budding and fission yeasts that reveal both a conserved core polarity circuit and several adaptations that each organism exploits to fulfill the needs of its lifestyle. The core circuit involves positive feedback by local activation of Cdc42 to generate a cluster of concentrated GTP-Cdc42 at the membrane. Species-specific pathways regulate the timing of polarization during the cell cycle, as well as the location and number of polarity sites.

Molecular mechanisms of kinesin-14 motors in spindle assembly and chromosome segregation

During eukaryote cell division, molecular motors are crucial regulators of microtubule organization, spindle assembly, chromosome segregation and intracellular transport. The kinesin-14 motors are evolutionarily conserved minus-end-directed kinesin motors that occur in diverse organisms from simple yeasts to higher eukaryotes. Members of the kinesin-14 motor family can bind to, crosslink or slide microtubules and, thus, regulate microtubule organization and spindle assembly. In this Commentary, we present the common subthemes that have emerged from studies of the molecular kinetics and mechanics of kinesin-14 motors, particularly with regard to their non-processive movement, their ability to crosslink microtubules and interact with the minus- and plus-ends of microtubules, and with microtubule-organizing center proteins. In particular, counteracting forces between minus-end-directed kinesin-14 and plus-end-directed kinesin-5 motors have recently been implicated in the regulation of microtubule nucleation. We also discuss recent progress in our current understanding of the multiple and fundamental functions that kinesin-14 motors family members have in important aspects of cell division, including the spindle pole, spindle organization and chromosome segregation.

Sport science integration: An evolutionary synthesis

The aim of the paper is to point out one way of integrating the supposedly incommensurate disciplines investigated in sports science. General, common principles can be found among apparently unrelated disciplines when the focus is put on the dynamics of sports-related phenomena. Dynamical systems approaches that have recently changed research in biological and social sciences among others, offer key concepts to create a common pluricontextual language in sport science. This common language, far from being homogenising, offers key synthesis between diverse fields, respecting and enabling the theoretical and experimental pluralism. It forms a softly integrated sports science characterised by a basic dynamic explanatory backbone as well as context-dependent theoretical flexibility. After defining the dynamic integration in living systems, unable to be captured by structural static approaches, we show the commonalities between the diversity of processes existing on different levels and time scales in biological and social entities. We justify our interpretation by drawing on some recent scientific contributions that use the same general principles and concepts, and diverse methods and techniques of data analysis, to study different types of phenomena in diverse disciplines. We show how the introduction of the dynamic framework in sport science has started to blur the boundaries between physiology, biomechanics, psychology, phenomenology and sociology. The advantages and difficulties of sport science integration and its consequences in research are also discussed.

A stable microtubule array drives fission yeast polarity reestablishment upon quiescence exit

Cells perpetually face the decision to proliferate or to stay quiescent. Here we show that upon quiescence establishment, Schizosaccharomyces pombe cells drastically rearrange both their actin and microtubule (MT) cytoskeletons and lose their polarity. Indeed, while polarity markers are lost from cell extremities, actin patches and cables are reorganized into actin bodies, which are stable actin filament-containing structures. Astonishingly, MTs are also stabilized and rearranged into a novel antiparallel bundle associated with the spindle pole body, named Q-MT bundle. We have identified proteins involved in this process and propose a molecular model for Q-MT bundle formation. Finally and importantly, we reveal that Q-MT bundle elongation is involved in polarity reestablishment upon quiescence exit and thereby the efficient return to the proliferative state. Our work demonstrates that quiescent S. pombe cells assemble specific cytoskeleton structures that improve the swiftness of the transition back to proliferation.

In vitro and in situ visualization of cytoskeletal deformation under load: traumatic axonal injury

It is difficult to obtain insight into the mechanisms occurring within live cells during mechanical loading, because this complex environment is dynamic and evolving. This is a particular challenge from a subcellular mechanics perspective, where temporal and spatial information on the evolving cytoskeletal structures is required under loading. Using fluorescently labeled proteins, we visualize 3-dimensional live subcellular cytoskeletal populations under mechanical loading using a high-resolution confocal microscope. The mechanical forces are determined using a computational (finite element) model that is validated by integrating instrumentation into the testing platform. Transfected microtubules and neurofilaments of E17 rat neuronal axons are imaged before, during, and after loading. Comparisons between unloaded and loaded live cells demonstrate both spatial and temporal changes for cytoskeletal populations within the imaged volume. NF signal decreases by 24%, yet the microtubule signal exhibits no significant change 20-35 s after loading. Transmission electron microscopy assesses cytoskeletal structure spatial distribution for undeformed and deformed axons. While cytoskeletal degeneration occurs at prolonged time intervals following loads, our data provides insights into real time cytoskeletal evolution occurring in situ. Our findings suggest that, for axons undergoing traumatic injury in response to applied mechanical loads, changes at the substructural level of neurofilaments may precede microtubule rupture and degeneration.

Nonequilibrium structure and dynamics in a microscopic model of thin-film active gels

In the presence of adenosine triphosphate, molecular motors generate active force dipoles that drive suspensions of protein filaments far from thermodynamic equilibrium, leading to exotic dynamics and pattern formation. Microscopic modeling can help to quantify the relationship between individual motors plus filaments to organization and dynamics on molecular and supramolecular length scales. Here, we present results of extensive numerical simulations of active gels where the motors and filaments are confined between two infinite parallel plates. Thermal fluctuations and excluded-volume interactions between filaments are included. A systematic variation of rates for motor motion, attachment, and detachment, including a differential detachment rate from filament ends, reveals a range of nonequilibrium behavior. Strong motor binding produces structured filament aggregates that we refer to as asters, bundles, or layers, whose stability depends on motor speed and differential end detachment. The gross features of the dependence of the observed structures on the motor rate and the filament concentration can be captured by a simple one-filament model. Loosely bound aggregates exhibit superdiffusive mass transport, where filament translocation scales with lag time with nonunique exponents that depend on motor kinetics. An empirical data collapse of filament speed as a function of motor speed and end detachment is found, suggesting a dimensional reduction of the relevant parameter space. We conclude by discussing the perspectives of microscopic modeling in the field of active gels.

A non-canonical mode of microtubule organization operates throughout pre-implantation development in mouse

In dividing animal cells, the centrosome, comprising centrioles and surrounding pericentriolar-material (PCM), is the major interphase microtubule-organizing center (MTOC), arranging a polarized array of microtubules (MTs) that controls cellular architecture. The mouse embryo is a unique setting for investigating the role of centrosomes in MT organization, since the early embryo is acentrosomal, and centrosomes emerge de novo during early cleavages. Here we use embryos from a GFP::CETN2 transgenic mouse to observe the emergence of centrosomes and centrioles in embryos, and show that unfocused acentriolar centrosomes first form in morulae (~16-32-cell stage) and become focused at the blastocyst stage (~64-128 cells) concomitant with the emergence of centrioles. We then used high-resolution microscopy and dynamic tracking of MT growth events in live embryos to examine the impact of centrosome emergence upon interphase MT dynamics. We report that pre-implantation mouse embryos of all stages employ a non-canonical mode of MT organization that generates a complex array of randomly oriented MTs that are preferentially nucleated adjacent to nuclear and plasmalemmal membranes and cell-cell interfaces. Surprisingly, however, cells of the early embryo continue to employ this mode of interphase MT organization even after the emergence of centrosomes. Centrosomes are found at MT-sparse sites and have no detectable impact upon interphase MT dynamics. To our knowledge, the early embryo is unique among proliferating cells in adopting an acentrosomal mode of MT organization despite the presence of centrosomes, revealing that the transition to a canonical mode of interphase MT organization remains incomplete prior to implantation.

Comparing contractile apparatus-driven cytokinesis mechanisms across kingdoms

Cytokinesis is the final stage of the cell cycle during which a cell physically divides into two daughters through the assembly of new membranes (and cell wall in some cases) between the forming daughters. New membrane assembly can either proceed centripetally behind a contractile apparatus, as in the case of prokaryotes, archaea, fungi, and animals or expand centrifugally, as in the case of higher plants. In this article, we compare the mechanisms of cytokinesis in diverse organisms dividing through the use of a contractile apparatus. While an actomyosin ring participates in cytokinesis in almost all centripetally dividing eukaryotes, the majority of bacteria and archaea (except Crenarchaea) divide using a ring composed of the tubulin-related protein FtsZ. Curiously, despite molecular conservation of the division machinery components, division site placement and its cell cycle regulation occur by a variety of unrelated mechanisms even among organisms from the same kingdom. While molecular motors and cytoskeletal polymer dynamics contribute to force generation during eukaryotic cytokinesis, cytoskeletal polymer dynamics alone appears to be sufficient for force generation during prokaryotic cytokinesis. Intriguingly, there are life forms on this planet that appear to lack molecules currently known to participate in cytokinesis and how these cells perform cytokinesis remains a mystery waiting to be unravelled.

How to build a robust intracellular concentration gradient

Concentration gradients of morphogens are critical regulators of patterning in developmental biology. Increasingly, intracellular concentration gradients have also been found to orchestrate spatial organization, but inside single cells, where they regulate processes such as cell division, polarity and mitotic spindle dynamics. Here, we discuss recent progress in understanding how such intracellular gradients can be built robustly. We focus particularly on the Pom1p gradient in fission yeast, elucidating how various buffering mechanisms operate to ensure precise gradient formation. In this case, a systems-level understanding of the entire mechanism of precise gradient construction is now within reach, with important implications for gradients in both intracellular and developmental contexts.

Spindles and active vortices in a model of confined filament-motor mixtures

Background

Robust self-organization of subcellular structures is a key principle governing the dynamics and evolution of cellular life. In fission yeast cells undergoing division, the mitotic spindle spontaneously emerges from the interaction of microtubules, motor proteins and the confining cell walls, and asters and vortices have been observed to self-assemble in quasi-two dimensional microtubule-kinesin assays. There is no clear microscopic picture of the role of the active motors driving this pattern formation, and the relevance of continuum modeling to filament-scale structures remains uncertain.

Results

Here we present results of numerical simulations of a discrete filament-motor protein model confined to a pressurised cylindrical box. Stable spindles, nematic configurations, asters and high-density semi-asters spontaneously emerge, the latter pair having also been observed in cytosol confined within emulsion droplets. State diagrams are presented delineating each stationary state as the pressure, motor speed and motor density are varied. We further highlight a parameter regime where vortices form exhibiting collective rotation of all filaments, but have a finite life-time before contracting to a semi-aster. Quantifying the distribution of life-times suggests this contraction is a Poisson process. Equivalent systems with fixed volume exhibit persistent vortices with stochastic switching in the direction of rotation, with switching times obeying similar statistics to contraction times in pressurised systems. Furthermore, we show that increasing the detachment rate of motors from filament plus-ends can both destroy vortices and turn some asters into vortices.

Conclusions

We have shown that discrete filament-motor protein models provide new insights into the stationary and dynamical behavior of active gels and subcellular structures, because many phenomena occur on the length-scale of single filaments. Based on our findings, we argue the need for a deeper understanding of the microscopic activities underpinning macroscopic self-organization in active gels and urge further experiments to help bridge these lengths.

The fission yeast XMAP215 homolog Dis1p is involved in microtubule bundle organization

Microtubules are essential for a variety of fundamental cellular processes such as organelle positioning and control of cell shape. Schizosaccharomyces pombe is an ideal organism for studying the function and organization of microtubules into bundles in interphase cells. Using light microscopy and electron tomography we analyzed the bundle organization of interphase microtubules in S. pombe. We show that cells lacking ase1p and klp2p still contain microtubule bundles. In addition, we show that ase1p is the major determinant of inter-microtubule spacing in interphase bundles since ase1 deleted cells have an inter-microtubule spacing that differs from that observed in wild-type cells. We then identified dis1p, a XMAP215 homologue, as factor that promotes the stabilization of microtubule bundles. In wild-type cells dis1p partially co-localized with ase1p at regions of microtubule overlap. In cells deleted for ase1 and klp2, dis1p accumulated at the overlap regions of interphase microtubule bundles. In cells lacking all three proteins, both microtubule bundling and inter-microtubule spacing were further reduced, suggesting that Dis1p contributes to interphase microtubule bundling.

Shaping fission yeast with microtubules

For cell morphogenesis, the cell must establish distinct spatial domains at specified locations at the cell surface. Here, we review the molecular mechanisms of cell polarity in the fission yeast Schizosaccharomyces pombe. These are simple rod-shaped cells that form cortical domains at cell tips for cell growth and at the cell middle for cytokinesis. In both cases, microtubule-based systems help to shape the cell by breaking symmetry, providing endogenous spatial cues to position these sites. The plus ends of dynamic microtubules deliver polarity factors to the cell tips, leading to local activation of the GTPase cdc42p and the actin assembly machinery. Microtubule bundles contribute to positioning the division plane through the nucleus and the cytokinesis factor mid1p. Recent advances illustrate how the spatial and temporal regulation of cell polarization integrates many elements, including historical landmarks, positive and negative controls, and competition between pathways.

The fission yeast TACC protein Mia1p stabilizes microtubule arrays by length-independent crosslinking

Microtubule (MT) arrays are mechanistic effectors of polarity specification and cell division. Linear bundles in which MTs are bridged laterally are dynamically assembled in systems ranging from differentiated metazoan cells to fungi in a process that remains poorly understood. Often, bundled MTs slide with respect to each other via molecular motors. In interphase cells of the fission yeast Schizosaccharomyces pombe, MT nucleation frequently occurs at preexisting arrays. As the nascent MT lengthens, stable antiparallel MT overlaps are thought to form through competition between motion of the minus-end-directed kinesin Klp2p and braking force exerted by the accumulating lateral crosslinker Ase1p. Here we show that Mia1p/Alp7p, a transforming acidic coiled-coil (TACC) protein, functions as a length-independent MT crosslinker. In cells lacking Mia1p MT-bundling activity, linear arrays frequently disassemble, accompanied by a marked increase in Ase1p off rate and erratic motion of sliding MTs. We propose that the combined action of lateral length-dependent (Ase1p) and terminal length-independent (Mia1p) crosslinkers is crucial for robust assembly and stability of linear MT arrays. Such use of qualitatively distinct crosslinking mechanisms in tandem may point to a general design principle in the engineering of stable cytoskeletal assemblies.

The kinesin-14 Klp2 organizes microtubules into parallel bundles by an ATP-dependent sorting mechanism

The dynamic organization of microtubules into parallel arrays allows interphase cells to set up multi-lane highways for intracellular transport and M-phase cells to build the mitotic and meiotic spindles. Here we show that a minimally reconstituted system composed of Klp2, a kinesin-14 from the fission yeast Schizosaccharomyces pombe, together with microtubules assembled from purified S. pombe tubulin, autonomously assembles bundles of parallel microtubules. Bundles form by an ATP-dependent sorting mechanism that requires the full-length Klp2 motor. By this mechanism, antiparallel-overlapped microtubules slide over one another until they dissociate from the bundles, whereas parallel-overlapped microtubules are selectively trapped by an energy-dissipating force-balance mechanism. Klp2-driven microtubule sorting provides a robust pathway for the organization of microtubules into parallel arrays. In vivo evidence indicates that Klp2 is required for the proper organization of S. pombe interphase microtubules into bipolar arrays of parallel-overlapped microtubules, suggesting that kinesin-14-dependent microtubule sorting may have wide biological importance.

Positioning cytokinesis

Cytokinesis is the terminal step of the cell cycle during which a mother cell divides into daughter cells. Often, the machinery of cytokinesis is positioned in such a way that daughter cells are born roughly equal in size. However, in many specialized cell types or under certain environmental conditions, the cell division machinery is placed at nonmedial positions to produce daughter cells of different sizes and in many cases of different fates. Here we review the different mechanisms that position the division machinery in prokaryotic and eukaryotic cell types. We also describe cytokinesis-positioning mechanisms that are not adequately explained by studies in model organisms and model cell types.

Force- and kinesin-8-dependent effects in the spatial regulation of fission yeast microtubule dynamics

Microtubules (MTs) are central to the organisation of the eukaryotic intracellular space and are involved in the control of cell morphology. For these purposes, MT polymerisation dynamics are tightly regulated. Using automated image analysis software, we investigate the spatial dependence of MT dynamics in interphase fission yeast cells with unprecedented statistical accuracy. We find that MT catastrophe frequencies (switches from polymerisation to depolymerisation) strongly depend on intracellular position. We provide evidence that compressive forces generated by MTs growing against the cell pole locally reduce MT growth velocities and enhance catastrophe frequencies. Furthermore, we find evidence for an MT length-dependent increase in the catastrophe frequency that is mediated by kinesin-8 proteins (Klp5/6). Given the intrinsic susceptibility of MT dynamics to compressive forces and the widespread importance of kinesin-8 proteins, we propose that similar spatial regulation of MT dynamics plays a role in other cell types as well. In addition, our systematic and quantitative data should provide valuable input for (mathematical) models of MT organisation in living cells.

Establishing new sites of polarization by microtubules

BACKGROUND

Microtubules (MTs) participate in the spatial regulation of actin-based processes such as cytokinesis and cell polarization. The fission yeast Schizosaccharomyces pombe is a rod-shaped cell that exhibits polarized cell growth at cell tips. MT plus ends contact and shrink from the cell tips and contribute to polarity regulation.

RESULTS

Here, we investigate the effects of changing cell shape on MTs and cell-polarization machinery. We physically bend fission yeast cells by forcing them into microfabricated femtoliter chambers. In these bent cells, MTs maintain a straight axis and contact and shrink from cortical sites at the sides of cells. At these ectopic sites, polarity factors such as bud6p, for3p (formin), and cdc42p are recruited and assemble actin cables in a MT-dependent manner. MT contact at the cortex induces the appearance of a bud6p dot within seconds. The accumulation of polarity factors leads to cell growth at these sites, when the MT-associated polarity factor tea1p is absent. This process is dependent on MTs, mal3p (EB1), moe1p (an EB1-binding protein), and for3p but, surprisingly, is independent of the tea1p-tea4p pathway.

CONCLUSIONS

These studies provide a direct demonstration for how MTs induce actin assembly at specific locations on the cell cortex and begin to identify a new pathway involved in this process. MT interactions with the cortex may be regulated by cortical-attachment sites. These findings highlight the crosstalk between cell shape, polarity mechanisms, and MTs responsible for cell morphogenesis.

The 3Ms of central spindle assembly: microtubules, motors and MAPs

During metaphase, sister chromatids are positioned at the midpoint of the microtubule-based mitotic spindle in preparation for their segregation. The onset of anaphase triggers inactivation of the key mitotic kinase cyclin-dependent kinase 1 (CDK1) and the polewards movement of sister chromatids. During anaphase, the mitotic spindle reorganizes in preparation for cytokinesis. Kinesin motor proteins and microtubule-associated proteins bundle the plus ends of interpolar microtubules and generate the central spindle, which regulates cleavage furrow initiation and the completion of cytokinesis. Complementary approaches, including cell biology, genetics and computational modelling, have provided new insights into the mechanism and regulation of central spindle assembly.

Mechanisms for maintaining microtubule bundles

The dynamics of microtubules (MTs) are crucial to many of their functions. Certain MT structures, such as the mitotic spindle apparatus, exhibit high MT turnover yet maintain their mass stably through long periods of time. Here, we highlight what are emerging as two important mechanisms for maintaining MT bundles: the first, MT nucleation from pre-existing MTs by means of gamma-tubulin-containing complexes; and the second, MT 'rescue' by the stabilizing protein CLASP. As examples, we describe recent advances in understanding the assembly and maintenance of simple MT bundles in fission yeast and plant cells, which have implications for the bundles of the animal mitotic spindle.

Interphase microtubule bundles use global cell shape to guide spindle alignment in fission yeast

Correct spindle alignment requires a cell to detect and interpret its global geometry and to communicate this information to the mitotic spindle. In the fission yeast, Schizosaccharomyces pombe, the mitotic spindle is aligned with the longitudinal axis of the rod-shaped cell. Here, using wild-type and cell-shape mutants we investigate the mechanism of initial spindle alignment and show that attachment of interphase microtubules to the spindle pole bodies (SPB), the yeast equivalent of the centrosome, is required to align duplicated SPBs, and thus the mitotic spindle, with the long axis of the cell. In the absence of interphase microtubules or attachment between the microtubules and the SPB, newly formed spindles are randomly oriented. We show that the axis of the mitotic spindle correlates with the axis along which the SPB, as a consequence of interphase microtubule dynamics, oscillates just before mitosis. We propose that cell geometry guides cytoplasmic microtubule alignment, which in turn, determines initial spindle alignment, and demonstrate that a failure of the spindle pre-alignment mechanism results in unequal chromosome segregation when spindle length is reduced.

A multicomponent assembly pathway contributes to the formation of acentrosomal microtubule arrays in interphase Drosophila cells

In animal cells, centrosomes nucleate microtubules that form polarized arrays to organize the cytoplasm. Drosophila presents an interesting paradox however, as centrosome-deficient mutant animals develop into viable adults. To understand this discrepancy, we analyzed behaviors of centrosomes and microtubules in Drosophila cells, in culture and in vivo, using a combination of live-cell imaging, electron microscopy, and RNAi. The canonical model of the cycle of centrosome function in animal cells states that centrosomes act as microtubule-organizing centers throughout the cell cycle. Unexpectedly, we found that many Drosophila cell-types display an altered cycle, in which functional centrosomes are only present during cell division. On mitotic exit, centrosomes disassemble producing interphase cells containing centrioles that lack microtubule-nucleating activity. Furthermore, steady-state interphase microtubule levels are not changed by codepleting both gamma-tubulins. However, gamma-tubulin RNAi delays microtubule regrowth after depolymerization, suggesting that it may function partially redundantly with another pathway. Therefore, we examined additional microtubule nucleating factors and found that Mini-spindles, CLIP-190, EB1, or dynein RNAi also delayed microtubule regrowth; surprisingly, this was not further prolonged when we codepleted gamma-tubulins. Taken together, these results modify our view of the cycle of centrosome function and reveal a multi-component acentrosomal microtubule assembly pathway to establish interphase microtubule arrays in Drosophila.

Lack of the GTPase RHO-4 in Neurospora crassa causes a reduction in numbers and aberrant stabilization of microtubules at hyphal tips

The multinucleate hyphae of the filamentous ascomycete fungus Neurospora crassa grow by polarized hyphal tip extension. Both the actin and microtubule cytoskeleton are required for maximum hyphal extension, in addition to other vital processes. Previously, we have shown that the monomeric GTPase encoded by the N. crassa rho-4 locus is required for actin ring formation during the process of septation; rho-4 mutants lack septa. However, other phenotypic aspects of the rho-4 mutant, such as slow growth and cytoplasmic bleeding, led us to examine the hypothesis that the microtubule (MT) cytoskeleton of the rho-4 mutant was affected in morphology and dynamics. Unlike a wild-type strain, the rho-4 mutant had few MTs and these few MTs originated from nuclear spindle pole bodies. rho-4 mutants and rho-4 strains containing a GTP-locked (activated) rho-4 allele showed a reduction in numbers of cytoplasmic MTs and microtubule stabilization at hyphal tips. Strains containing a GDP-biased (negative) allele of rho-4 showed normal numbers of MTs and minor effects on microtubule stabilization. An examination of nuclear dynamics revealed that rho-4 mutants have large, and often, stretched or broken nuclei. These observations indicate that RHO-4 plays important roles in regulating both the actin and MT cytoskeleton, which are essential for optimal hyphal tip growth and in nuclear distribution and morphology.

Stabilization of overlapping microtubules by fission yeast CLASP

Many microtubule (MT) structures contain dynamic MTs that are bundled and stabilized in overlapping arrays. CLASPs are conserved MT-binding proteins implicated in the regulation of MT plus ends. Here, we show that the Schizosaccharomyces pombe CLASP, cls1p/peg1p, mediates the stabilization of overlapping MTs within the mitotic spindle and interphase bundles. cls1p localizes to these regions but not to interphase MT plus ends. Inactivation of cls1p leads to the rapid depolymerization of spindle midzone MTs. cls1p also stabilizes a subset of MTs within interphase bundles. cls1p prevents disassembly of the entire microtubule, while still allowing for plus-end growth. It has no measurable effects on MT nucleation, polymerization, catastrophe, or bundling. A direct interaction with ase1p (PRC1/MAP65) targets cls1p to regions of antiparallel MT overlap. These findings show how a MT-stabilizing factor attached to specific sites on MTs can help to generate MT structures that have both dynamic and stable components.

Cytoskeletal bundle mechanics

The mechanical properties of cytoskeletal actin bundles play an essential role in numerous physiological processes, including hearing, fertilization, cell migration, and growth. Cells employ a multitude of actin-binding proteins to actively regulate bundle dimensions and cross-linking properties to suit biological function. The mechanical properties of actin bundles vary by orders of magnitude depending on diameter and length, cross-linking protein type and concentration, and constituent filament properties. Despite their importance to cell function, the molecular design principles responsible for this mechanical behavior remain unknown. Here, we examine the mechanics of cytoskeletal bundles using a molecular-based model that accounts for the discrete nature of constituent actin filaments and their distinct cross-linking proteins. A generic competition between filament stretching and cross-link shearing determines three markedly different regimes of mechanical response that are delineated by the relative values of two simple design parameters, revealing the universal nature of bundle-bending mechanics. In each regime, bundle-bending stiffness displays distinct scaling behavior with respect to bundle dimensions and molecular composition, as observed in reconstituted actin bundles in vitro. This mechanical behavior has direct implications on the physiological bending, buckling, and entropic stretching behavior of cytoskeletal processes, as well as reconstituted actin systems. Results are used to predict the bending regimes of various in vivo cytoskeletal bundles that are not easily accessible to experiment and to generate hypotheses regarding implications of the isolated behavior on in vivo bundle function.

Assembly of microtubules and actomyosin rings in the absence of nuclei and spindle pole bodies revealed by a novel genetic method

BACKGROUND

The nucleus and the centrosomes (spindle pole bodies; SPBs in yeast) are believed to play key roles in the organization of various cellular structures, such as the actomyosin ring and microtubules. The ability to generate cells lacking nuclei and centrosomes (SPBs) is key to the elucidation of the role of these structures in various cellular processes.

METHODOLOGY/PRINCIPAL FINDINGS

Here we describe a genetic method, using the Schizosaccharomyces pombe cdc16-116 mutant, to reliably and efficiently generate fission yeast cells lacking nuclei and SPBs. We use this approach to show that the assembly of microtubules does not require nuclear associated microtubule organizing centers and SPBs. We also show that actomyosin rings can assemble albeit inefficiently in the absence of nuclei and SPBs.

CONCLUSION

We conclude that key cytoskeletal elements can be assembled in the absence of nuclei and SPBs. In addition, the approach we describe, taken together with physical approaches such as centrifugation, should facilitate the investigation of the role of the nucleus and SPBs in the assembly and inheritance of various cellular structures and organelles.

Microtubules offset growth site from the cell centre in fission yeast

The design principles that underlie cellular morphogenetic mechanisms are central to understanding the generation of cell form. We have investigated the constraints governing the formation and positioning of new growth zones in the fission yeast cell and have shown that establishment of a new axis of polarity is independent of microtubules and that in the absence of microtubules a new growth zone is activated near the nucleus in the middle of the cell. Activation of a new growth zone can occur at any stage of the cell cycle as long as the nucleus is a sufficient distance away from previously growing ends. The positioning of growth zones is regulated by the polarity marker Tea1 delivered by microtubules; cells with short microtubules locate the growth zone near the region where the microtubules terminate. We propose a model for the activation of new growth zones comprising a long-range laterally inhibitory component and a self-activating positive local component that is delivered to cell ends by Tea1 and the microtubules. The principle of this symmetry-breaking design may also apply to the morphogenesis of other cells.

Organization of interphase microtubules in fission yeast analyzed by electron tomography

Polarized cells, such as neuronal, epithelial, and fungal cells, all display a specialized organization of their microtubules (MTs). The interphase MT cytoskeleton of the rod-shaped fission yeast, Schizosaccharomyces pombe, has been extensively described by fluorescence microscopy. Here, we describe a large-scale, electron tomography investigation of S. pombe, including a 3D reconstruction of a complete eukaryotic cell volume at sufficient resolution to show both how many MTs there are in a bundle and their detailed architecture. Most cytoplasmic MTs are open at one end and capped at the other, providing evidence about their polarity. Electron-dense bridges between the MTs themselves and between MTs and the nuclear envelope were frequently observed. Finally, we have investigated structure/function relationships between MTs and both mitochondria and vesicles. Our analysis shows that electron tomography of well-preserved cells is ideally suited for describing fine ultrastructural details that were not visible with previous techniques.

Microtubule Organization: Cell Shape Is Destiny

A simple self-assembly pathway generates cytoplasmic microtubule bundles that can locate the cell center and guide spindle assembly in fission yeast. The cylindrical cell shape automatically corrects spindle orientation errors, rendering a checkpoint unnecessary.

Crosslinkers and motors organize dynamic microtubules to form stable bipolar arrays in fission yeast

Microtubule (MT) nucleation not only occurs from centrosomes, but also in large part from dispersed nucleation sites. The subsequent sorting of short MTs into networks like the mitotic spindle requires molecular motors that laterally slide overlapping MTs and bundling proteins that statically connect MTs. How bundling proteins interfere with MT sliding is unclear. In bipolar MT bundles in fission yeast, we found that the bundler ase1p localized all along the length of antiparallel MTs, whereas the motor klp2p (kinesin-14) accumulated only at MT plus ends. Consequently, sliding forces could only overcome resistant bundling forces for short, newly nucleated MTs, which were transported to their correct position within bundles. Ase1p thus regulated sliding forces based on polarity and overlap length, and computer simulations showed these mechanisms to be sufficient to generate stable bipolar bundles. By combining motor and bundling proteins, cells can thus dynamically organize stable regions of overlap between cytoskeletal filaments.

Microtubule-organizing centres: a re-evaluation

The number, length, distribution and polarity of microtubules are largely controlled by microtubule-organizing centres, which nucleate and anchor microtubule minus ends in a process that requires gamma-tubulin. Here we discuss recent evidence indicating that gamma-tubulin-dependent formation of new microtubules is not restricted to conventional microtubule-organizing centres. These findings suggest that the spatio-temporal control of microtubule nucleation is more complex than previously thought, leading us to a re-evaluation of the concept of the microtubule-organizing center.