Self-surface charge exfoliation and electrostatically coordinated 2D hetero-layered hybrids

Cations Induced Fluorescence Enhancement in Keggin-Al13 for Quantitative Detection

The Keggin-Al13 hydroxide clusters serve as pivotal models for elucidating molecular pathways in geochemical reactions. In this study, we presented a strategy aiming at the quantitative detection of ε-Al13 Keggin clusters using photoluminescent spectra. Specifically, we manipulate the electronic structure of ε-Al13 by introducing Na ions onto the ε-Al13 surface, encapsulated within a Na-O3 motif. The Na-ion-modified ε-Al13 (Na-ε-Al13) cluster demonstrates incredible photoluminescent qualities, with fluorescence excitation and emission peaks centered at 365 and 436 nm, respectively. In addition, the fluorescence intensities display a linear dependence on the concentrations of Na-ε-Al13, with a detection limit of 15.4 μM. This correlation facilitates the quantitative and precise determination of Na-ε-Al13 concentrations via fluorescence. Both experimental characterizations and theoretical calculations underscore the importance of decorated Na ions in regulating the electronic structure of the ε-Al13 cluster. Lastly, the influence of external anions/cations on the photoluminescent properties of ε-Al13 primarily mirrors modifications to the nonradiative decay process, which is regulated via electrostatic interactions. This work demonstrates an effective strategy for quantitative detection of the ε-Al13 Keggin clusters through photoluminescent spectra.

Polytypic metal chalcogenide nanocrystals

By engineering chemically identical but structurally distinct materials into intricate and sophisticated polytypic nanostructures, which often surpass their pure phase objects and even produce novel physical and chemical properties, exciting applications in the fields of photovoltaics, electronics and photocatalysis can be achieved. In recent decades, various methods have been developed for synthesizing a library of polytypic nanocrystals encompassing IV, III-V and II-VI polytypic semiconductors. The exceptional performances of polytypic metal chalcogenide nanocrystals have been observed, making them highly promising candidates for applications in photonics and electronics. However, achieving high-precision control over the morphology, composition, crystal structure, size, homojunctions, and periodicity of polytypic metal chalcogenide nanostructures remains a significant synthetic challenge. This review article offers a comprehensive overview of recent progress in the synthesis and control of polytypic metal chalcogenide nanocrystals using colloidal synthetic strategies. Starting from a concise introduction on the crystal structures of metal chalcogenides, the subsequent discussion delves into the colloidal synthesis of polytypic metal chalcogenide nanocrystals, followed by an in-depth exploration of the key factors governing polytypic structure construction. Subsequently, we provide comprehensive insights into the physical properties of polytypic metal chalcogenide nanocrystals, which exhibit strong correlations with their applications. Thereafter, we emphasize the significance of polytypic nanostructures in various applications, such as photovoltaics, photocatalysis, transistors, thermoelectrics, stress sensors, and the electrocatalytic hydrogen evolution. Finally, we present a summary of the recent advancements in this research field and provide insightful perspectives on the forthcoming challenges, opportunities, and future research directions.

Accelerated Solar-Driven Polyolefin Degradation via Self-Activated Hydroxy-Rich ZnIn2S4

Degradation of polyolefin (PE) plastic by a traditional chemical method requires a high pressure and a high temperature but generates complex products. Here, sulfur vacancy-rich ZnIn2S4 and hydroxy-rich ZnIn2S4 were rationally fabricated to realize photocatalytic degradation of PE in an aqueous solution under mild conditions. The results reveal that the optimized photocatalyst could degrade PE into CO2 and CO, and PE had a weight loss of 84.5% after reaction for 60 h. Systematic experiments confirm that the synergetic effect of hydroxyl groups and S vacancies contributes to improve the photocatalytic degradation properties of plastic wastes. In-depth investigation illustrates that the active radicals attack (h+ and •OH) weak spots (C-H and C-C bonds) of the PE chain to form CO2, which is further selectively photoreduced to CO. Multimodule synergistic tandem catalysis can further improve the utilization value of plastic wastes; for example, product CO2/CO in the plastic degradation process can be converted in situ into HCOOH by coupling with electrocatalytic technology.

All-in-One: Plasmonic Janus Heterostructures for Efficient Cooperative Photoredox Catalysis

Janus heterostructures consisting of multiple jointed components with distinct properties have gained growing interest in the photoredox catalytic field. Herein, we have developed a facile low-temperature method to gain anisotropic one-dimensional Au-tipped CdS (Au-CdS) nanorods (NRs), followed by assembling Ru molecular co-catalyst (RuN5) onto the surface of the NRs. The CdS NRs decorated with plasmonic Au nanoparticles and RuN5 complex harness the virtues of metal-semiconductor and inorganic-organic interface, giving directional charge transfer channels, spatially separated reaction sites, and enhanced local electric field distribution. As a result, the Au-CdS-RuN5 can act as an efficient dual-function photocatalyst for simultaneous H2 evolution and valorization of biomass-derived alcohols. Benefiting from the interfacial charge decoupling and selective chemical bond activation, the optimal all-in-one Au-CdS-RuN5 heterostructure shows greatly enhanced photoactivity and selectivity as compared to bare CdS NRs, along with a remarkable apparent quantum yield of 40.2 % at 400 nm. The structural evolution and working mechanism of the heterostructures are systematically analyzed based on experimental and computational results.

A compendium of all-in-one solar-driven water splitting using ZnIn2S4-based photocatalysts: guiding the path from the past to the limitless future

Photocatalytic water splitting represents a leading approach to harness the abundant solar energy, producing hydrogen as a clean and sustainable energy carrier. Zinc indium sulfide (ZIS) emerges as one of the most captivating candidates attributed to its unique physicochemical and photophysical properties, attracting much interest and holding significant promise in this domain. To develop a highly efficient ZIS-based photocatalytic system for green energy production, it is paramount to comprehensively understand the strengths and limitations of ZIS, particularly within the framework of solar-driven water splitting. This review elucidates the three sequential steps that govern the overall efficiency of ZIS with a sharp focus on the mechanisms and inherent drawbacks associated with each phase, including commonly overlooked aspects such as the jeopardising photocorrosion issue, the neglected oxidative counter surface reaction kinetics in overall water splitting, the sluggish photocarrier dynamics and the undesired side redox reactions. Multifarious material design strategies are discussed to specifically mitigate the formidable limitations and bottleneck issues. This review concludes with the current state of ZIS-based photocatalytic water splitting systems, followed by personal perspectives aimed at elevating the field to practical consideration for future endeavours towards sustainable hydrogen production through solar-driven water splitting.

A Review of Metal-Organic Frameworks Derived Hollow-Structured Photocatalysts: Synthesis and Applications

Photocatalysis is a most important approach to addressing global energy shortages and environmental issues due to its environmentally friendly and sustainable properties. The key to realizing efficient photocatalysis relies on developing appropriate catalysts with high efficiency and chemical stability. Among various photocatalysts, Metal-organic frameworks (MOFs)-derived hollow-structured materials have drawn increased attention in photocatalysis based on advantages like more active sites, strong light absorption, efficient transfer of pho-induced charges, excellent stability, high electrical conductivity, and better biocompatibility. Specifically, MOFs-derived hollow-structured materials are widely utilized in photocatalytic CO2 reduction (CO2RR), hydrogen evolution (HER), nitrogen fixation (NRR), degradation, and other reactions. This review starts with the development story of MOFs, the commonly adopted synthesis strategies of MOFs-derived hollow materials, and the latest research progress in various photocatalytic applications are also introduced in detail. Ultimately, the challenges of MOFs-derived hollow-structured materials in practical photocatalytic applications are also prospected. This review holds great potential for developing more applicable and efficient MOFs-derived hollow-structured photocatalysts.

Band Structure Tuning via Pt Single Atom Induced Rapid Hydroxyl Radical Generation toward Efficient Photocatalytic Reforming of Lignocellulose into H2

Photocatalytic lignocellulose reforming for H2 production presents a compelling solution to solve environmental and energy issues. However, achieving scalable conversion under benign conditions faces consistent challenges including insufficient active sites for H2 evolution reaction (HER) and inefficient lignocellulose oxidation directly by photogenerated holes. Herein, it is found that Pt single atom-loaded CdS nanosheet (PtSA-CdS) would be an active photocatalyst for lignocellulose-to-H2 conversion. Theoretical and experimental analyses confirm that the valence band of CdS shifts downward after depositing isolated Pt atoms, and the slope of valence band potential on pH for PtSA-CdS is more positive than Nernstian equation. These characteristics allow PtSA-CdS to generate large amounts of •OH radicals even at pH 14, while the capacity is lacking with CdS alone. The employment of •OH/OH- redox shuttle succeeds in relaying photoexcited holes from the surface of photocatalyst, and the •OH radicals can diffuse away to decompose lignocellulose efficiently. Simultaneously, surface Pt atoms, featured with a thermoneutralΔ G H ∗ $\Delta G_{\mathrm{H}}^{\mathrm{*}}$ , would collect electrons to expedite HER. Consequently, PtSA-CdS performs a H2 evolution rate of 10.14 µmol h-1 in 1 m KOH aqueous solution, showcasing a remarkable 37.1-fold enhancement compared to CdS. This work provides a feasible approach to transform waste biomass into valuable sources.

Heterogeneous Photocatalytic C(sp2)-H Activation of Formate for Hydrocarboxylation of Alkenes

Light-driven carboxylation offers a promising approach for synthesizing valuable fine chemicals under mild conditions. Here we disclose a heterogeneous photocatalytic strategy of C(sp2)-H activation of formate for hydrocarboxylation of alkenes over zinc indium sulfide (ZnIn2S4) under visible light. This protocol functions well with a variety of substituted styrenes with good to excellent yields; it also works for unactivated alkenes albeit with lower yields. Mechanistic studies confirm the existence of CO2⋅- as a key intermediate. It was found that C(sp2)-H activation of formate is induced by S⋅ species on the surface of ZnIn2S4 via hydrogen atom transfer (HAT) instead of a photogenerated hole oxidation mechanism. Moreover, both cleavage of the C(sp2)-H of HCOO- and formation of a benzylic anion were found to be involved in the rate-determining step for the hydrocarboxylation of styrene.

Efficient Holes Abstraction by Precisely Decorating Ruthenium Single Atoms and RuOx Clusters on ZnIn2S4 for Photocatalytic Pure Water Splitting

Developing efficient photocatalysts for two-electron water splitting with simultaneous H2O2 and H2 generation shows great promise for practical application. Currently, the efficiency of two-electron water splitting is still restricted by the low utilization of photogenerated charges, especially holes, of which the transfer rate is much slower than that of electrons. Herein, Ru single atoms and RuOx clusters are co-decorated on ZnIn2S4 (RuOx/Ru-ZIS) to employ as multifunctional sites for efficient photocatalytic pure water splitting. Doping of Ru single atoms in the ZIS basal plane enhances holes abstraction from bulk ZIS by regulating the electronic structure, and RuOx clusters offer a strong interfacial electric field to remarkably promote the out-of-plane migration of holes from ZIS. Moreover, Ru single atoms and RuOx clusters also serve as active sites for boosting surface water oxidation. As a result, an excellent H2 and H2O2 evolution rates of 581.9 µmol g-1 h-1 and 464.4 µmol g-1 h-1 is achieved over RuOx/Ru-ZIS under visible light irradiation, respectively, with an apparent quantum efficiency (AQE) of 4.36% at 400 nm. This work paves a new way to increase charge utilization by manipulating photocatalyst using single atom and clusters.

Photocatalytic CO2 Reduction by Near-Infrared-Light (1200 nm) Irradiation and a Ruthenium-Intercalated NiAl-Layered Double Hydroxide

Near-infrared light-driven photocatalytic CO2 reduction (NIR-CO2PR) holds tremendous promise for the production of valuable commodity chemicals and fuels. However, designing photocatalysts capable of reducing CO2 with low energy NIR photons remains challenging. Herein, a novel NIR-driven photocatalyst comprising an anionic Ru complex intercalated between NiAl-layered double hydroxide nanosheets (NiAl-Ru-LDH) is shown to deliver efficient CO2 photoreduction (0.887 μmol h-1) with CO selectivity of 84.81 % under 1200 nm illumination and excellent stability over 50 testing cycles. This remarkable performance results from the intercalated Ru complex lowering the LDH band gap (0.98 eV) via a compression-related charge redistribution phenomenon. Furthermore, transient absorption spectroscopy data verified light-induced electron transfer from the Ru complex towards the LDH sheets, increasing the availability of electrons to drive CO2PR. The presence of hydroxyl defects in the LDH sheets promotes the adsorption of CO2 molecules and lowers the energy barriers for NIR-CO2PR to CO. To our knowledge, this is one of the first reports of NIR-CO2PR at wavelengths up to 1200 nm in LDH-based photocatalyst systems.

In-situ one-step construction of poly(heptazine imide)/poly(triazine imide) heterojunctions for photocatalytic hydrogen evolution

The construction of heterojunctions is challenging, requiring atomic-level contact and interface matching. Here, we have achieved atomic-level interfacial matching by constructing poly(heptazine imide)/poly(triazine imide) crystalline carbon nitride heterojunctions in an in-situ one-step method. The content of poly(triazine imide) in heterojunctions is positively related to the proportion of lithium chloride in potassium chloride and lithium chloride mixed-salts. The optimized heterojunction achieves an apparent quantum efficiency of 48.34 % for photocatalytic hydrogen production at 420 nm, which is at a good level in polymeric carbon nitride photocatalysts. The proposed ion-thermal assisted heterojunction construction strategy contributes to the development of polymeric carbon nitride photocatalysts with high crystallization and high charge separation efficiency.

S-scheme homojunction of 0D cubic/2D hexagonal ZnIn2S4 for efficient photocatalytic reduction of nitroarenes

The targeted conversion of toxic nitroarenes to corresponding aminoarenes presents significant promise in simultaneously addressing environmental pollution concerns and producing value-added fine chemicals. In this study, we synthesize a 0D/2D ZnIn2S4 homojunction (CH-ZnIn2S4) by in situ growth of cubic ZnIn2S4 (C-ZnIn2S4) quantum dots onto the surface of ultrathin hexagonal ZnIn2S4 (H-ZnIn2S4) nanosheets for photocatalytic reduction of nitroarenes to aminoarenes using water as a hydrogen donor. The optimal performance of photocatalytic nitro reduction over the 0D/2D CH-ZnIn2S4 homojunction reaches 96.1% within 20 min of visible light irradiation, which is 2.45 and 1.52 times than that of C-ZnIn2S4 (39.3%) and H-ZnIn2S4 (63.3%), respectively. The improved photocatalytic performance can be attributed to the formation of a step-type S-scheme homojunction, characterized by identity chemical composition and natural lattice matching. The configuration enables continuous band bending and a low energy barrier of charge transportation, benefiting the charge transfer across the interface while maximizing their redox capabilities. Furthermore, the 2D structure of H-ZnIn2S4 nanosheets offers abundant surface sites to immobilize the 0D C-ZnIn2S4 that provides ample exposed active sites with low overpotential for HER, thereby ensuring high hydrogenation reduction activity of nitroarenes. The study is expected to inspire further interest in the reasonable design of homojunction structures for efficient and sustainable photocatalytic redox reactions.

Discovery of Self-Assembled 2D Ru/Si Superlattices Boosting Hydrogen Evolution

2D heterostructuring is a versatile methodology for designing nanoarchitecture catalytic systems that allow for reconstruction and modulation of interfaces and electronic structures. However, catalysts with such structures are extremely scarce due to limited synthetic strategies. Here, a highly ordered 2D Ru/Si/Ru/Si… nano-heterostructures (RSHS) is reported by acid etching of the LaRuSi electride. RSHS shows a superior electrocatalytic activity for hydrogen evolution with an overpotential of 14 mV at 10 mA cm-2 in alkaline media. Both experimental analysis and first-principles calculations demonstrate that the electronic states of Ru can be tuned by strong interactions of the interfacial Ru-Si, leading to an optimized hydrogen adsorption energy. Moreover, due to the synergistic effect of Ru and Si, the energy barrier of water dissociation is significantly reduced. The well-organized superlattice structure will provide a paradigm for construction of efficient catalysts with tunable electronic states and dual active sites.

Zinc-indium-sulfide favors efficient C - H bond activation by concerted proton-coupled electron transfer

C - H bond activation is a ubiquitous reaction that remains a major challenge in chemistry. Although semiconductor-based photocatalysis is promising, the C - H bond activation mechanism remains elusive. Herein, we report value-added coupling products from a wide variety of biomass and fossil-derived reagents, formed via C - H bond activation over zinc-indium-sulfides (Zn-In-S). Contrary to the commonly accepted stepwise electron-proton transfer pathway (PE-ET) for semiconductors, our experimental and theoretical studies evidence a concerted proton-coupled electron transfer (CPET) pathway. A pioneering microkinetic study, considering the relevant elementary steps of the surface chemistry, reveals a faster C - H activation with Zn-In-S because of circumventing formation of a charged radical, as it happens in PE-ET where it retards the catalysis due to strong site adsorption. For CPET over Zn-In-S, H abstraction, forming a neutral radical, is rate-limiting, but having lower energy barriers than that of PE-ET. The rate expressions derived from the microkinetics provide guidelines to rationally design semiconductor catalysis, e.g., for C - H activation, that is based on the CPET mechanism.

Unveiling the Synergistic Role of Frustrated Lewis Pairs in Carbon-Encapsulated Ni/NiOx Photothermal Cocatalyst for Enhanced Photocatalytic Hydrogen Production

The development of high-density and closely spaced frustrated Lewis pairs (FLPs) is crucial for enhancing catalyst activity and accelerating reaction rates. However, constructing efficient FLPs by breaking classical Lewis bonds poses a significant challenge. Here, this work has made a pivotal discovery regarding the Jahn-Teller effect during the formation of grain boundaries in carbon-encapsulated Ni/NiOx (Ni/NiOx@C). This effect facilitates the formation of high-density O (VO) and Ni (VNi) vacancy sites with different charge polarities, specifically FLP-VO-C basic sites and FLP-VNi-C acidic sites. The synergistic interaction between FLP-VO-C and FLP-VNi-C sites not only reduces energy barriers for water adsorption and splitting, but also induces a strong photothermal effect. This mutually reinforcing effect contributes to the exceptional performance of Ni/NiOx@C as a cocatalyst in photothermal-assisted photocatalytic hydrogen production. Notably, the Ni/NiOx@C/g-C3N4 (NOCC) composite photocatalyst exhibits remarkable hydrogen production activity with a rate of 10.7 mmol g-1 h-1, surpassing that of the Pt cocatalyst by 1.76 times. Moreover, the NOCC achieves an impressive apparent quantum yield of 40.78% at a wavelength of 380 nm. This work paves the way for designing novel defect-state multiphase cocatalysts with high-density and adjacent FLP sites, which hold promise for enhancing various catalytic reactions.

Design and Fabrication of Biomass Derived Black Carbon Modified g-C3N4/FeIn2S4 Heterojunction as Highly Efficient Photocatalyst for Wastewater Treatment

The environmental deterioration caused by dye wastewater discharge has received considerable attention in recent decades. One of the most promising approaches to addressing the aforementioned environmental issue is the development of photocatalysts with high solar energy consumption efficiency for the treatment of dye-contaminated water. In this study, a novel low-cost π-π biomass-derived black carbon modified g-C3N4 coupled FeIn2S4 composite (i.e., FeInS/BC-CN) photocatalyst is successfully designed and fabricated that reveals significantly improved photocatalytic performance for the degradation of Eosin Yellow (EY) dye in aqueous solution. Under dark and subsequent visible light irradiation, the amount optimized composite reveals 99% removal performance for EY dye, almost three-fold compared to that of the pristine FeInS and BC-CN counterparts. Further, it is confirmed by means of the electron spin resonance spectrometry, quenching experiments, and density functional theory (DFT) calculations, that the hydroxyl radicals (•OH) and superoxide radicals (•O2 -) are the dominant oxidation species involved in the degradation process of EY dye. In addition, a systematic photocatalytic degradation route is proposed based on the resultant degradation intermediates detectedduring liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis. This work provides an innovative idea for the development of advanced photocatalysts to mitigate water pollution.

Effective Photocatalytic Ethanol Reforming into High-Value-Added Multicarbon Compound Coupled with H2 Production Over Pt-S3 Sites at PtSA-ZnIn2S4 Interface

Selective photocatalytic production of high-value acetaldehyde concurrently with H2 from bioethanol is an appealing approach to meet the urgent environment and energy issues. However, the difficult ethanol dehydrogenation and insufficient active sites for proton reduction within the catalysts, and the long spatial distance between these two sites always restrict their catalytic activity. Here, guided by the strong metal-substrate interaction effect, an atomic-level catalyst design strategy to construct Pt-S3 single atom on ZnIn2S4 nanosheets (PtSA-ZIS) is demonstrated. As active center with optimized H adsorption energy to facilitate H2 evolution reaction, the unique Pt single atom also donates electrons to its neighboring S atoms with electron-enriched sites formed to activate the O─H bond in *CH3CHOH and promote the desorption of *CH3CHO. Thus, the synergy between Pt single atom and ZIS together will reduce the energy barrier for the ethanol oxidization to acetaldehyde, and also narrow the spatial distance for proton mass transfer. These features enable PtSA-ZIS photocatalyst to produce acetaldehyde with a selectivity of ≈100%, which will spontaneously transform into 1,1-diethoxyethane via acetalization to avoid volatilization. Meanwhile, a remarkable H2 evolution rate (184.4 µmol h-1) is achieved with a high apparent quantum efficiency of 10.50% at 400 nm.

Facet-Dependent Fe2O3/BiVO4(110)/BiVO4(010)/Fe2O3 Dual S-Scheme Photocatalyst as an Efficient Visible-Light-Driven Peroxymonosulfate Activator for Norfloxacin Degradation

A lack of eco-friendly, highly active photocatalyst for peroxymonosulfate (PMS) activation and unclear environmental risks are significant challenges. Herein, we developed a double S-scheme Fe2O3/BiVO4(110)/BiVO4(010)/Fe2O3 photocatalyst to activate PMS and investigated its impact on wheat seed germination. We observed an improvement in charge separation by depositing Fe2O3 on the (010) and (110) surfaces of BiVO4. This enhancement is attributed to the formation of a dual S-scheme charge transfer mechanism at the interfaces of Fe2O3/BiVO4(110) and BiVO4(010)/Fe2O3. By introducing PMS into the system, photogenerated electrons effectively activate PMS, generating reactive oxygen species (ROS) such as hydroxyl radicals (·OH) and sulfate radicals (SO4·-). Among the tested systems, the 20% Fe2O3/BiVO4/Vis/PMS system exhibits the highest catalytic efficiency for norfloxacin (NOR) removal, reaching 95% in 40 min. This is twice the catalytic efficiency of the Fe2O3/BiVO4/PMS system, 1.8 times that of the Fe2O3/BiVO4 system, and 5 times that of the BiVO4 system. Seed germination experiments revealed that Fe2O3/BiVO4 heterojunction was beneficial for wheat seed germination, while PMS had a significant negative effect. This study provides valuable insights into the development of efficient and sustainable photocatalytic systems for the removal of organic pollutants from wastewater.

Customizing precise, tunable, and universal cascade charge transfer chains towards versatile photoredox catalysis

The core factors dictating the photocatalysis efficiency are predominantly centered on controllable modulation of anisotropic spatial charge transfer/separation and regulating vectorial charge transport pathways. Nonetheless, the sluggish charge transport kinetics and incapacity of precisely tuning interfacial charge flow at the nanoscale level are still the primary dilemma. Herein, we conceptually demonstrate the elaborate design of a cascade charge transport chain over transition metal chalcogenide-insulating polymer-cocatalyst (TIC) photosystems via a progressive self-assembly strategy. The intermediate ultrathin non-conjugated insulating polymer layer, i.e., poly(diallyl-dimethylammonium chloride) (PDDA), functions as the interfacial electron relay medium, and simultaneously, outermost co-catalysts serve as the terminal "electron reservoirs", synergistically contributing to the charge transport cascade pathway and substantially boosting the interfacial charge separation. We found that the insulating polymer mediated unidirectional charge transfer cascade is universal for a large variety of metal or non-metal reducing co-catalysts (Au, Ag, Pt, Ni, Co, Cu, NiSe2, CoSe2, and CuSe). More intriguingly, such peculiar charge flow characteristics endow the self-assembled TIC photosystems with versatile visible-light-driven photoredox catalysis towards photocatalytic hydrogen generation, anaerobic selective organic transformation, and CO2-to-fuel conversion. Our work would provide new inspiration for smartly mediating spatial vectorial charge transport towards emerging solar energy conversion.

Visible Light-Driven Photocatalytic Degradation of Methylene Blue Dye Using a Highly Efficient Mg-Al LDH@g-C3N4@Ag3PO4 Nanocomposite

The issue of water resource pollution resulting from the discharge of dyes is a matter of great concern for the environment. In this investigation, a new ternary heterogeneous Mg-Al LDH@g-C3N4X@Ag3PO4Y (X = wt % of g-C3N4 with respect to Mg-Al layered double hydroxide (LDH) and Y = wt % of Ag3PO4 loaded on Mg-Al LDH@g-C3N430) nanocomposite was prepared with the aim of increasing charge carrier separation and enhancement of photocatalytic performance to degrade methylene blue (MB) dye. The prepared samples were subjected to characterization via Fourier-transform infrared spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray, transmission electron microscopy, X-ray diffraction, UV-vis diffuse reflectance spectroscopy, photoluminescence, and photoelectrochemical analysis. It was observed that in the presence of the composite of Mg-Al LDH and g-C3N4, the photocatalytic decomposition of MB under 150 W mercury lamp illumination increases significantly as opposed to Mg-Al LDH alone, and the Mg-Al LDH@g-C3N4 level with Ag3PO4 coating causes the complete degradation of MB to occur in less time. The outcomes show that the Mg-Al LDH@g-C3N430@Ag3PO45 nanocomposite demonstrated the highest photodegradation activity (99%). Scavenger tests showed that the two most effective agents in the photodegradation of MB are holes and hydroxyl radicals, respectively. Finally, a type II heterojunction photocatalytic degradation mechanism for MB by Mg-Al LDH@g-C3N430@Ag3PO45 was proposed.

Physically Exfoliating 2D Materials: A Versatile Combination of Different Materials into a Layered Structure

Improving the properties of the existing two-dimensional (2D) materials is a major concern for many researchers today. Synergistic coupling of single-phase 2D material species with secondary functional materials has resulted in 2D nanohybrids with significantly enhanced properties beyond the sum of their individual components. In particular, nanohybrids created by alternatingly integrating different material species in the confined 2D nanometer regime have the potential to meet the needs of a wide variety of applications, particularly the many important energy-related applications that are of interest. However, scaling up production of 2D nanohybrids is still challenging, which is a major barrier to their practical application. Delamination and exfoliation by physical means separate the weakly bound 2D nanosheets into kinetically stable single- or few-layers. Herein, we provide a concise overview of recent achievements in the physical exfoliation-based fabrication of 2D nanohybrids featuring controlled heterolayered structures. Several strategies to efficiently produce heterolayered 2D nanohybrids in large quantities are described, such as (i) coexfoliation of different 2D species, (ii) aqueous-phase synthesis, and (iii) gas-phase synthesis. The versatility of the 2D nanohybrids was also illustrated by remarkable research examples, especially in energy-related applications.

Interfacial electron modulation of 2D nanopetal ZnIn2S4 with edge-decorated Ni clusters for accelerated photocatalytic H2 evolution

Heterostructure interfacial engineering between photocatalyst and co-catalyst to obtain an optimized electronic structure is a promising approach to improving their performance in the photocatalytic hydrogen evolution reaction (HER). In this work, two-dimensional nanopetal-like ZnIn2S4 (ZIS) with an adequately exposed active (110) edge facet-decorated Ni cluster heterostructure was prepared via chemical bath deposition, followed by photodeposition. In the catalyst preparation, the ZIS microstructure was modulated to sufficiently expose the active sites of the (110) edge for the HER, on which spontaneous interfacial engineering with an additional Ni cluster co-catalyst would be triggered via photodeposition in situ. The hydrogen production rate of the composite photocatalyst was excellent, at up to 26.80 mmol g-1 h-1 under simulated sunlight, which was 15.4 times greater than that of pristine ZIS. The optimized photocatalyst achieved a state-of-the-art apparent quantum yield of 61.68% at a single wavelength of 420 nm. Combined with systematic experimental characterization and density functional theory calculation, it was demonstrated that the separation and migration of charge carriers were significantly enhanced via the Ni cluster-induced interfacial electron redistribution, which contributed to the near-zero Gibbs free energy barrier and favored intermediate (*H) adsorption and desorption behavior, resulting in the superior photocatalytic performance. In summary, this work enables tuning of the interfacial electronic properties via spontaneous photodeposition of metallic cluster co-catalyst on the edge active sites, through which the separation of photogenerated charge carriers and surface redox reactions can be synergistically facilitated.

Photoredox Coupling of CO2 Reduction with Benzyl Alcohol Oxidation over Ternary Metal Chalcogenides (ZnmIn2S3+m, m = 1-5) with Regulable Products Selectivity

Integrating photocatalytic CO2 reduction with selective benzyl alcohol (BA) oxidation in one photoredox reaction system is a promising way for the simultaneous utilization of photogenerated electrons and holes. Herein, ZnmIn2S3+m (m = 1-5) semiconductors (ZnIn2S4, Zn2In2S5, Zn3In2S6, Zn4In2S7, and Zn5In2S8) with various composition faults were synthesized via a simple hydrothermal method and used for effective selective dehydrocoupling of benzyl alcohol into high-value C-C coupling products and reduction of CO2 into syngas under visible light. The absorption edge of ZnmIn2S3+m samples shifted to shorter wavelengths as the atomic ratio of Zn/In was increased. The conduction band and valence band position can be adjusted by changing the Zn/In ratio, resulting in controllable photoredox ability for selective BA oxidation and CO2 reduction. For example, the selectivity of benzaldehyde (BAD) product was reduced from 76% (ZnIn2S4, ZIS1) to 27% (Zn4In2S7, ZIS4), while the selectivity of hydrobenzoin (HB) was increased from 22% to 56%. Additionally, the H2 formation rate on ZIS1 (1.6 mmol/g/h) was 1.6 times higher than that of ZIS4 (1.0 mmol/g/h), and the CO formation rate on ZIS4 (0.32 mmol/g/h) was three times higher than that of ZIS1 (0.13 mmol/g/h), demonstrating that syngas with different H2/CO ratios can be obtained by controlling the Zn/In ratio in ZnmIn2S3+m. This study provides new insights into unveiling the relationship of structure-property of ZnmIn2S3+m layered crystals, which are valuable for implementation in a wide range of environment and energy applications.

Facile construction of a robust CuS@NaNbO3 nanorod composite: A unique p-n heterojunction structure with superior performance in photocatalytic hydrogen evolution

The construction of heterojunctions is commonly regarded as an efficient way to promote the production of hydrogen via photocatalytic water splitting through the enhancement of interfacial interactions. The p-n heterojunction is an important kind of heterojunction with an inner electric field based on the different properties of semiconductors. In this work, we reported the synthesis of a novel CuS/NaNbO₃ p-n heterojunction by depositing CuS nanoparticles on the external surface of NaNbO₃ nanorods, using a facile calcination and hydrothermal method. Through the screening of different ratios, the optimum hydrogen production activity reached 1603 μmol·g^-1·h^-1, which is much higher than that of NaNbO₃ (3.6 times) and CuS (2.7 times). Subsequent characterizations proved semiconductor properties and the existence of p-n heterojunction interactions between the two materials, which inhibited the recombination of photogenerated carriers and improved the efficiency of electron transfer. This work provides a meaningful strategy to utilize the p-n heterojunction structure for the promotion of photocatalytic hydrogen production.

2D Transition Metal Dichalcogenides for Photocatalysis

Two-dimensional (2D) transition metal dichalcogenides (TMDs), a rising star in the post-graphene era, are fundamentally and technologically intriguing for photocatalysis. Their extraordinary electronic, optical, and chemical properties endow them as promising materials for effectively harvesting light and catalyzing the redox reaction in photocatalysis. Here, we present a tutorial-style review of the field of 2D TMDs for photocatalysis to educate researchers (especially the new-comers), which begins with a brief introduction of the fundamentals of 2D TMDs and photocatalysis along with the synthesis of this type of material, then look deeply into the merits of 2D TMDs as co-catalysts and active photocatalysts, followed by an overview of the challenges and corresponding strategies of 2D TMDs for photocatalysis, and finally look ahead this topic.

Sulfur vacancy and p-n junction synergistically boosting interfacial charge transfer and separation in ZnIn2S4/NiWO4 heterostructure for enhanced photocatalytic hydrogen evolution

Constructing a p-n heterojunction with vacancy is advantageous for speeding up carrier separation and migration due to the synergy of the built-in electric field and electron capture of the vacancy. Herein, a sulfur vacancy riched-ZnIn₂S₄/NiWO₄ p-n heterojunction (VZIS/NWO) photocatalyst was rationally designed and fabricated for photocatalytic hydrogen evolution. The composition and structure of VZIS/NWO were characterized. The existence of sulfur vacancy was confirmed through X-ray photoelectron spectroscopy, high-resolution transmission electron microscope, and electron paramagnetic resonance technology. The p-n heterojunction formed by ZnIn₂S₄ and NiWO₄ was proved to provide a convenient channel to boost interfacial charge migration and separation. By reducing the band gap, the vacancy engineer can improve light absorption as well as serve as an electron trap to improve photo-induced electron-hole separation. Benefiting from the synergy of p-n heterojunction and vacancy, the optimal VZIS/NWO-5 catalyst exhibits dramatically enhanced H₂ generation performance, which is about 10-fold that of the pristine ZnIn₂S₄. This work emphasizes the synergy between p-n heterojunction and sulfur vacancy for enhancing photocatalytic hydrogen evolution performance.

Heterostructure-Engineered Semiconductor Quantum Dots toward Photocatalyzed-Redox Cooperative Coupling Reaction

Semiconductor quantum dots have been emerging as one of the most ideal materials for artificial photosynthesis. Here, we report the assembled ZnS-CdS hybrid heterostructure for efficient coupling cooperative redox catalysis toward the oxidation of 1-phenylethanol to acetophenone/2,3-diphenyl-2,3-butanediol (pinacol) integrated with the reduction of protons to H2. The strong interaction and typical type-I band-position alignment between CdS quantum dots and ZnS quantum dots result in efficient separation and transfer of electron-hole pairs, thus distinctly enhancing the coupled photocatalyzed-redox activity and stability. The optimal ZnS-CdS hybrid also delivers a superior performance for various aromatic alcohol coupling photoredox reaction, and the ratio of electrons and holes consumed in such redox reaction is close to 1.0, indicating a high atom economy of cooperative coupling catalysis. In addition, by recycling the scattered light in the near field of a SiO2 sphere, the SiO2-supported ZnS-CdS (denoted as ZnS-CdS/SiO2) catalyst can further achieve a 3.5-fold higher yield than ZnS-CdS hybrid. Mechanistic research clarifies that the oxidation of 1-phenylethanol proceeds through the pivotal radical intermediates of •C(CH3)(OH)Ph. This work is expected to promote the rational design of semiconductor quantum dots-based heterostructured catalysts for coupling photoredox catalysis in organic synthesis and clean fuels production.

Facile Synthesis of 2D/2D Ti2C3/ZnIn2S4 Heterostructure for Enhanced Photocatalytic Hydrogen Generation

ZnIn₂S₄, a novel two-dimensional visible light-responsive photocatalyst, has attracted much attention in the photocatalytic evolution of H₂ under visible light irradiation due to its attractive intrinsic photoelectric properties and geometric configuration. However, ZnIn₂S₄ still has severe charge recombination, which results in moderate photocatalytic performance. Herein, we report the successful synthesis of 2D/2D ZnIn₂S₄/Ti₃C₂ nanocomposites by a facile one-step hydrothermal method. The efficiency of the nanocomposites in photocatalytic hydrogen evolution under visible light irradiation was also evaluated for different ratios of Ti₃C₂, and the optimal photocatalytic activity was achieved at 5% Ti₃C₂. Importantly, the activity was significantly higher than that of pure ZnIn₂S₄, ZnIn₂S₄/Pt, and ZnIn₂S₄/graphene. The enhanced photocatalytic activity is mainly due to the close interfacial contact between Ti₃C₂ and ZnIn₂S₄ nanosheets, which amplifies the transport of photogenerated electrons and enhances the separation of photogenerated carriers. This research describes a novel approach for the synthesis of 2D MXenes for photocatalytic hydrogen production and expands the utility of MXene composite materials in the fields of energy storage and conversion.

Interface Engineering in 2D/2D Heterogeneous Photocatalysts

Assembling different 2D nanomaterials into heterostructures with strong interfacial interactions presents a promising approach for novel artificial photocatalytic materials. Chemically implementing the 2D nanomaterials' construction/stacking modes to regulate different interfaces can extend their functionalities and achieve good performance. Herein, based on different fundamental principles and photochemical processes, multiple construction modes (e.g., face-to-face, edge-to-face, interface-to-face, edge-to-edge) are overviewed systematically with emphasis on the relationships between their interfacial characteristics (e.g., point, linear, planar), synthetic strategies (e.g., in situ growth, ex situ assembly), and enhanced applications to achieve precise regulation. Meanwhile, recent efforts for enhancing photocatalytic performances of 2D/2D heterostructures are summarized from the critical factors of enhancing visible light absorption, accelerating charge transfer/separation, and introducing novel active sites. Notably, the crucial roles of surface defects, cocatalysts, and surface modification for photocatalytic performance optimization of 2D/2D heterostructures are also discussed based on the synergistic effect of optimization engineering and heterogeneous interfaces. Finally, perspectives and challenges are proposed to emphasize future opportunities for expanding 2D/2D heterostructures for photocatalysis.

Interfacial Assembly of Ti3 C2 Tx /ZnIn2 S4 Heterojunction for High-Performance Photodetectors

Two-dimensional (2D) materials have emerged as prospective candidates for electronics and optoelectronics applications as they can be easily fabricated through liquid exfoliation and used to fabricate various structures by further subsequent processing methods in addition to their extraordinary and unique optoelectronic properties. Herein, the Ti3 C2 Tx /ZIS heterostructure with nanometer-thick Ti3 C2 Tx -MXene and ZnIn2 S4 (ZIS) films is fabricated by successive interfacial assembly of liquid exfoliated 2D MXene and ZnIn2 S4 nanoflakes. Benefiting from the superior light-harvesting capability and low dark current of ZnIn2 S4 , the limited absorbance, large scattering coefficient, and high dark current disadvantages of MXene are ameliorated. Meanwhile, the separation and transport of photogenerated carriers in ZnIn2 S4 are improved due to the excellent electrical conductivity of Ti3 C2 Tx nanoflakes. As a result, the as-prepared Ti3 C2 Tx /ZIS heterostructure photodetector has excellent optoelectronic characteristics in terms of a high responsivity of 1.04 mA W-1 , a large specific detectivity up to 1 × 1011  Jones, a huge on/off ratio at around 105 , and an ultralow dark current at ≈10-12  A. This work demonstrates a convenient method to construct heterostructured photodetectors by liquid exfoliated 2D nanoflakes, the as-fabricated Ti3 C2 Tx /ZIS heterostructured photodetectors show promising application potential for low-cost, reliable, and high-performance photodetectors.

Ni3B as p-Block Element-Modulated Cocatalyst for Efficient Photocatalytic CO2 Reduction

Due to the multiple electron and proton transfer processes involved, the photogenerated charges are easily recombined during the photocatalytic reduction of CO₂, making the generation of the eight-electron product CH₄ kinetically more difficult. Herein, Ni₃B nanoparticles modulated by p-block element were combined with TiO₂ nanosheets to construct a novel Schottky junction photocatalyst (Ni₃B/TiO₂) for the selective photocatalytic conversion of CO₂ to CH₄. The formed Ni₃B/TiO₂ photocatalyst with Schottky junction ensures a transfer pathway of photogenerated electrons from TiO₂ to Ni₃B, which facilitates the accumulation of electrons on the surface of Ni₃B and subsequently improves the activity of photocatalytic CO₂ reduction to CH₄. The optimized Ni₃B/TiO₂ Schottky junction shows an improved CH₄ yield of 30.03 μmol g^-1 h^-1, which was much higher than those of TiO₂ (1.62 μmol g^-1 h^-1), NiO/TiO₂ (2.44 μmol g^-1 h^-1), and Ni/TiO₂ (4.3 μmol g^-1 h^-1). This work demonstrated that the introduction of p-block elements can alleviate the scaling relationship effect of pure metal cocatalysts to a certain extent, and the modified Ni₃B can be used as a promising new cocatalyst to effectively improve the selective photocatalytic of CO₂ to CH₄.

Self-Enhancing Photoelectrochemical Properties in van der Waals Ferroelectric CuInP2S6 by Photoassisted Acid Hydrolysis

Transition metal thiophosphate, CuInP₂S₆ (CIPS), has recently emerged as a potentially promising material for photoelectrochemical (PEC) water splitting due to its intrinsic ferroelectric polarization for spontaneous photocarrier separation. However, the poor kinetics of the hydrogen evolution reaction (HER) greatly limits its practical applications. Herein, we report self-enhancing photocatalytic behavior of a CIPS photocathode due to chemically driven oxygen incorporation by photoassisted acid oxidation. The optimal oxygen-doped CIPS demonstrates a >1 order of magnitude enhancement in the photocurrent density compared to that of pristine CIPS. Through comprehensive spectroscopic and microscopic investigations combined with theoretical calculations, we disclose that oxygen doping will lower the Fermi level position and decrease the HER barrier, which further accelerates charge separation and improves the HER activity. This work may deliver a universal and facile strategy for improving the PEC performance of other van der Waals metal thiophosphates.

π-d Electron-Coupled PBDIT/CdS Heterostructure Enables Hole Extraction for Efficient Photocatalytic Hydrogen Production

Construction of heterostructures is one of the most promising strategies for designing photocatalysts for highly efficient solar hydrogen (H₂) production because the introduction of an electron-donating counterpart contributes to more effective photon absorption, while the heterostructures benefit spatial carrier separation. However, the hole-transfer rate is usually 2-3 orders of magnitude slower than that of the electron-transfer rate within the heterostructures, ensuing serious charge recombination. Here, we find the energy band offset-driven charge-transfer behavior in a donor-acceptor (D-A)-conjugated polymer/CdS organic/inorganic heterostructure and realize hole-transfer improvement in cooperation with a further hole removal motif of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate. The photocatalytic H₂ production activity is increased by nearly 2 orders of magnitude with the apparent quantum yield hitting ca. 80% at 450 nm without co-catalysts. Ultrafast transient absorption together with surface photovoltage characterizations consolidates the hole extraction mechanism. The intimate bond formed at the interface between the polymer and the inorganic semiconductor acts as an interpenetrating network at the nanoscale level, thus providing a charge-transfer freeway for boosting charge separation.

Ultrathin Two-Dimensional ZnIn2S4/Nix-B Heterostructure for High-Performance Photocatalytic Fine Chemical Synthesis and H2 Generation

Photocatalytic H₂ evolution coupled with organic transformation provides a new avenue to cooperatively produce clean fuels and fine chemicals, enabling a more efficient conversion of solar energy. Here, a novel two-dimensional (2D) heterostructure of ultrathin ZnIn₂S₄ nanosheets decorated with amorphous nickel boride (Ni_x-B) is prepared for simultaneous photocatalytic anaerobic H₂ generation and aromatic aldehydes production. This ZnIn₂S₄/Ni_x-B catalyst elaborately combines the ultrathin structure advantage of the ZnIn₂S₄ semiconductor and the cocatalytic function of Ni_x-B. A high H₂ production rate of 8.9 mmol h^-1 g^-1 is delivered over the optimal ZnIn₂S₄/Ni_x-B with a stoichiometric production of benzaldehyde, which is about 22 times higher than ZnIn₂S₄. Especially, the H₂ evolution rate is much higher than the value (2.8 mmol h^-1 g^-1) of the traditional photocatalytic half reaction of H₂ production with triethanolamine as a sacrificial agent. The apparent quantum yield reaches 24% at 420 nm, representing an advanced photocatalyst system. Moreover, compared with traditional sulfide, hydroxide, and even noble metal modified ZnIn₂S₄/M counterparts (M = NiS, Ni(OH)₂, Pt), the ZnIn₂S₄/Ni_x-B also maintains markedly higher photocatalytic activity, showing a highly efficient and economical advantage of the Ni_x-B cocatalyst. This work sheds light on the exploration of 2D ultrathin semiconductors decorated with novel transition metal boride cocatalyst for efficient photocatalytic organic transformation integrated with solar fuel production.

Upconversion nanoparticles coupled with hierarchical ZnIn2S4 nanorods as a near-infrared responsive photocatalyst for photocatalytic CO2 reduction

Developing near-infrared responsive (NIR) photocatalysts is very important for the development of solar-driven photocatalytic systems. Metal sulfide semiconductors have been extensively used as visible-light responsive photocatalysts for photocatalytic applications owing to their high chemical variety, narrow bandgap and suitable redox potentials, particularly the benchmark ZnIn₂S₄. However, their potential as NIR-responsive photocatalysts is yet to be reported. Herein, for the first time demonstrated that upconversion nanoparticles can be delicately coupled with hierarchical ZnIn₂S₄ nanorods (UCNPs/ZIS) to assemble a NIR-responsive composite photocatalyst, and as such composite is verified by ultraviolet-visible diffuse reflectance spectra and upconversion luminescence spectra. As a result, remarkable photocatalytic CO and CH₄ production rates of 1500 and 220 nmol g^-1h^-1, respectively, were detected for the UCNPs/ZIS composite under NIR-light irradiation (λ ≥ 800 nm), which is rarely reported in the literature. The remarkable photocatalytic activity of the UCNPs/ZIS composite can be understood not only because the heterojunction between UCNPs and ZIS can promote the charge separation efficiency, but also the intimate interaction of UCNPs with hierarchical ZIS nanorods can enhance the energy transfer. This finding may open a new avenue to develop more NIR-responsive photocatalysts for various solar energy conversion applications.

Engineering of Ni(OH)2 Modified Two-Dimensional ZnIn2S4 Heterostructure for Boosting Hydrogen Evolution under Visible Light Illumination

Developing efficient catalysts to produce clean fuel by using solar energy has long been the goal to mitigate the issue of traditional fossil fuel scarcity. In this work, we design a heterostructure photocatalyst by employing two green components, Ni(OH)2 and ZnIn2S4, for efficient photocatalytic H2 evolution under the illumination of visible light. After optimization, the obtained photocatalyst exhibits an H2 evolution rate at 0.52 mL h-1 (5 mg) (i.e., 4640 μmol h-1 g-1) under visible light illumination. Further investigations reveal that such superior activity is originated from the efficient charge separation due to the two-dimensional (2D) structure of ZnIn2S4 and existing high-quality heterojunction.

Protruding Pt single-sites on hexagonal ZnIn2S4 to accelerate photocatalytic hydrogen evolution

Single-site cocatalysts engineered on supports offer a cost-efficient pathway to utilize precious metals, yet improving the performance further with minimal catalyst loading is still highly desirable. Here we have conducted a photochemical reaction to stabilize ultralow Pt co-catalysts (0.26 wt%) onto the basal plane of hexagonal ZnIn₂S₄ nanosheets (Pt_SS-ZIS) to form a Pt-S₃ protrusion tetrahedron coordination structure. Compared with the traditional defect-trapped Pt single-site counterparts, the protruding Pt single-sites on h-ZIS photocatalyst enhance the H₂ evolution yield rate by a factor of 2.2, which could reach 17.5 mmol g⁻¹ h⁻¹ under visible light irradiation. Importantly, through simple drop-casting, a thin Pt_SS-ZIS film is prepared, and large amount of observable H₂ bubbles are generated, providing great potential for practical solar-light-driven H₂ production. The protruding single Pt atoms in Pt_SS-ZIS could inhibit the recombination of electron-hole pairs and cause a tip effect to optimize the adsorption/desorption behavior of H through effective proton mass transfer, which synergistically promote reaction thermodynamics and kinetics.

An alternative approach to defect-trapped Pt single-sites on a semiconductor is reported. Here, protruding Pt sites inhibit charge recombination and cause a tip effect which enhances H₂ evolution yield rates with minimal co-catalyst loading.

Hierarchical CuS@ZnIn2S4 Hollow Double-Shelled p-n Heterojunction Octahedra Decorated with Fullerene C60 for Remarkable Selectivity and Activity of CO2 Photoreduction into CH4

In this work, a hollow double-shelled architecture, based on n-type ZnIn₂S₄ nanosheet-coated p-type CuS hollow octahedra (CuS@ZnIn₂S₄ HDSOs), is designed and fabricated as a p-n heterojunction photocatalyst for selective CO₂ photoreduction into CH₄. The resulting hybrids provide rich active sites and effective charge migration/separation to drive CO₂ photoreduction, and meanwhile, CO detachment is delayed to increase the possibility of eight-electron reactions for CH₄ production. As expected, the optimized CuS@ZnIn₂S₄ HDSOs manifest a CH₄ yield of 28.0 μmol g^-1 h^-1 and a boosted CH₄ selectivity up to 94.5%. The decorated C₆₀ both possesses high electron affinity and improves catalyst stability and CO₂ adsorption ability. Thus, the C₆₀-decorated CuS@ZnIn₂S₄ HDSOs exhibit the highest CH₄ evolution rate of 43.6 μmol g^-1 h^-1 and 96.5% selectivity. This work provides a rational strategy for designing and fabricating efficient heteroarchitectures for CO₂ photoreduction.