Integration of molecular and enzymatic catalysts on graphene for biomimetic generation of antithrombotic species

A Cost-Effective Hemin-Based Artificial Enzyme Allows for Practical Applications

Nanomaterials excel in mimicking the structure and function of natural enzymes while being far more interesting in terms of structural stability, functional versatility, recyclability, and large-scale preparation. Herein, the story assembles hemin, histidine analogs, and G-quadruplex DNA in a catalytically competent supramolecular assembly referred to as assembly-activated hemin enzyme (AA-heminzyme). The catalytic properties of AA-heminzyme are investigated both in silico (by molecular docking and quantum chemical calculations) and in vitro (notably through a systematic comparison with its natural counterpart horseradish peroxidase, HRP). It is found that this artificial system is not only as efficient as HRP to oxidize various substrates (with a turnover number kcat of 115 s-1) but also more practically convenient (displaying better thermal stability, recoverability, and editability) and more economically viable, with a catalytic cost amounting to <10% of that of HRP. The strategic interest of AA-heminzyme is further demonstrated for both industrial wastewater remediation and biomarker detection (notably glutathione, for which the cost is decreased by 98% as compared to commercial kits).

Near-infrared-II photoacoustic imaging and photo-triggered synergistic treatment of thrombosis via fibrin-specific homopolymer nanoparticles

The formation of an occlusive thrombus in the blood vessel is the main culprit for numerous life-threatening cardiovascular diseases that represent the leading cause of morbidity and mortality worldwide. Herein, we develop a polymer nanoplatform that integrates long-wavelength second near-infrared (NIR-II) photoacoustic imaging-based thrombosis detection and antithrombotic activity. We design and synthesize a semiconducting homopolymer with strong absorption in the NIR-II region and molecular motion that boosts photothermal conversion and photoacoustic signal. We dope the homopolymer with a thermosensitive nitric oxide donor to formulate a nanoplatform, on which a fibrin-specific ligand is functionalized to ensure selective thrombus targeting. We show that with strong NIR-II light harvesting capability, bright photoacoustic signal and active thrombus accumulation ability, the NIR-II photoacoustic nanoprobes are able to sensitively and selectively delineate thrombi. We find that the nanoplatform also displays rapid and efficient blood clot removal activity with nearly complete blood flow restoration in both carotid thrombosis models and low extremity arterial thrombosis models under NIR-II light trigger by integrating a thrombus-localized photothermal effect and on-demand nitric oxide release. This nanoplatform offers a versatile approach for the diagnosis and treatment of life-threatening diseases caused by various thrombotic disorders.

Untangling the Effects of Doping Carbon with Diverse Heteroatoms on the Bioelectrochemistry of Glucose Oxidase

Great enthusiasm for doping carbon materials with nonmetallic heteroatoms for promoting electrical contact of redox enzymes with electrodes in bioelectronics has been aroused. However, systematic studies of different heteroatoms on enzyme activities are still lacking. Herein, choosing glucose oxidase (GOD) as a model enzyme, carbon nanotubes (CNTs) are used as electron carriers to evaluate the effects of heteroatoms' species on the direct electron transfer and catalytic activities of GOD. Experimental data demonstrate that phosphorus (P)-doped CNTs provide the most intimate electrical contact with GOD compared to other elements (B, N, and S) doping, delivering a 3-fold increase in rate constant (k_s, 2.1 s^-1) and an enhanced turnover rate (k_cat, 2.74 × 10^-9 M cm^-2 s^-1) in comparison with CNTs. Meanwhile, theoretical modeling clarifies that the active center of GOD interacts more strongly with P-doped CNTs and maintains their conformation well compared to other CNTs. This study will help to understand the mechanism of heteroatom doping of carbon on the enzymatic electron transfer and shed light on the design of efficient bioelectrocatalytic interfaces.

An innovative fluorometric bioanalysis strategy towards recognition of DNA methylation using opto-active polymer: A new platform for DNA damage studies by genosensor technology

Efficient pharmacotherapy of cancer is related to accurate recognition of genetic mutations and epigenetic alterations in the early-stage diagnosis. In the present study, a novel optical genosensor based on toluidine blue as photonic probe was developed to detection of DNA methylation using hybridization of pDNA with cDNA. Biomedical analysis was performed using UV-vis and fluorometric methods. For the first time, this strategy was applied for the distinction of methylated DNA from unmethylated-DNA-based on the interaction of optical probe with methylated-DNA and unmethylated DNA. Fluorescence spectroscopic data showed that poly-toluidine blue could be bind to DNA sequences and lead to different fluorescence patterns and could be used as an efficient geno-platform for the sensitive bioassay of mutation. The excitation and emission wavelengths were 580 and 630 nm, respectively. Non-binding of mismatch sequences with the optical probe was used as negative control. Under optimal conditions, linear range was 1 zM to 0.2 pm and the lower limit of quantitation was obtained as target concentrations ranging 1 zM. The designed genosensor showed high capability to distinct methylation from un-methylated. Therefore, the designed DNA-based bioassay could detect DNA methylation significantly. Finally, bioanalysis of real samples showed that the designed genosensor could use to detect DNA methylation which is a new platform for point of care analysis.

A thrombin-triggered self-regulating anticoagulant strategy combined with anti-inflammatory capacity for blood-contacting implants

Interrelated coagulation and inflammation are impediments to endothelialization, a prerequisite for the long-term function of cardiovascular materials. Here, we proposed a self-regulating anticoagulant coating strategy combined with anti-inflammatory capacity, which consisted of thrombin-responsive nanogels with anticoagulant and anti-inflammatory components. As an anticoagulant, rivaroxaban was encapsulated in nanogels cross-linked by thrombin-cleavable peptide and released upon the trigger of environmental thrombin, blocking the further coagulation cascade. The superoxide dismutase mimetic Tempol imparted the antioxidant property. Polyphenol epigallocatechin gallate (EGCG), in addition to its anti-inflammatory function in synergy with Tempol, also acted as a weak cross-linker to stabilize the coating. The effectiveness and versatility of this coating were validated using two typical cardiovascular devices as models, biological valves and vascular stents. It was demonstrated that the coating worked as a precise strategy to resist coagulation and inflammation, escorted reendothelialization on the cardiovascular devices, and provided a new perspective for designing endothelium-like functional coatings.

Potentiality of Nanoenzymes for Cancer Treatment and Other Diseases: Current Status and Future Challenges

Studies from past years have observed various enzymes that are artificial, which are issued to mimic naturally occurring enzymes based on their function and structure. The nanozymes possess nanomaterials that resemble natural enzymes and are considered an innovative class. This innovative class has achieved a brilliant response from various developments and researchers owing to this unique property. In this regard, numerous nanomaterials are inspected as natural enzyme mimics for multiple types of applications, such as imaging, water treatment, therapeutics, and sensing. Nanozymes have nanomaterial properties occurring with an inheritance that provides a single substitute and multiple platforms. Nanozymes can be controlled remotely via stimuli including heat, light, magnetic field, and ultrasound. Collectively, these all can be used to increase the therapeutic as well as diagnostic efficacies. These nanozymes have major biomedical applications including cancer therapy and diagnosis, medical diagnostics, and bio sensing. We summarized and emphasized the latest progress of nanozymes, including their biomedical mechanisms and applications involving synergistic and remote control nanozymes. Finally, we cover the challenges and limitations of further improving therapeutic applications and provide a future direction for using engineered nanozymes with enhanced biomedical and diagnostic applications.

Effect of a Cocatalyst on a Photoanode in Water Splitting: A Study of Scanning Electrochemical Microscopy

With a proper band gap of ∼2.4 eV for solar light absorption and suitable valence band edge position for oxygen evolution, scheelite-monoclinic bismuth vanadate (BiVO₄) has become one of the most attractive photocatalysts for efficient visible-light-driven photoelectrochemical (PEC) water splitting. Several studies have indicated that surface modification of BiVO₄ with a cocatalyst such as NiFe layered double hydroxide (LDH) can significantly increase the PEC water splitting performance of the catalyst. Herein, we experimentally investigated the charge transfer dynamics and charge carrier recombination processes by scanning electrochemical microscopy (SECM) with the feedback mode on the surface of BiVO₄ and BiVO₄/NiFe-LDH as model samples. The ratio of rate constants for photogenerated hole (k_h+⁰) to electron (k_e-⁰) via the photocatalyst of BiVO₄/NiFe-LDH reacting with the redox couple is found to be five times larger than that of BiVO₄ under illumination. In this case, the ratio of the rate constants k_h+⁰/k_e-⁰ stands for the interfacial charge recombination process. This implies the cocatalyst NiFe-LDH suppresses the electron back transfer greatly and finally reduces the surface recombination. Control experiments with cocatalysts CoPi and RuO_x onto BiVO₄ further verify this conclusion. Therefore, the SECM characterization allows us to make an overall analysis on the function of cocatalysts in the PEC water splitting system.

A multi-in-one strategy with glucose-triggered long-term antithrombogenicity and sequentially enhanced endothelialization for biological valve leaflets

Bioprosthetic heart valves are commonly applied in heart valve replacement, while the effectiveness is limited by inflammation, calcification and especially thrombosis. Surface modification is expected to endow the biological valves with versatility. Herein, a multi-in-one strategy was established to modify biological valves with long-term antithrombogenicity and sequentially enhanced endothelialization triggered by glucose, in which the direct thrombin inhibitor rivaroxaban (RIVA)-loaded nanogels were embedded and the detachable polyethylene glycol (PEG) was grafted. These two anticoagulant strategies were connected by glucose oxidase (GOx), which catalyzed the oxidation of glucose to produce hydrogen peroxide (H₂O₂) and local acidic environment. The generated H₂O₂ stimulated H₂O₂-responsive nanogels release RIVA to obtain continuous antithrombogenicity. Meanwhile, PEG was attached to the surface via pH-sensitive bonds, which prevented thrombus formation by resisting the serum proteins and platelets adhesion at the initial stage of material/blood contact. Sequentially, PEG gradually peeled off under the local weak acidic environment, which ultimately resulted in the endothelialization enhancement. Within such multi-in-one strategy, the biological valve leaflets induced long-term anticoagulant performance, gradually enhanced endothelialization and improved tissue affinity, including anti-calcification and anti-inflammation, indicating the potential of the response sequence matching between materials and tissues after implantation, which might improve performance of biological heart valves.

Micro-Bio-Chemo-Mechanical-Systems: Micromotors, Microfluidics, and Nanozymes for Biomedical Applications

Wireless nano-/micromotors powered by chemical reactions and/or external fields generate motive forces, perform tasks, and significantly extend short-range dynamic responses of passive biomedical microcarriers. However, before micromotors can be translated into clinical use, several major problems, including the biocompatibility of materials, the toxicity of chemical fuels, and deep tissue imaging methods, must be solved. Nanomaterials with enzyme-like characteristics (e.g., catalase, oxidase, peroxidase, superoxide dismutase), that is, nanozymes, can significantly expand the scope of micromotors' chemical fuels. A convergence of nanozymes, micromotors, and microfluidics can lead to a paradigm shift in the fabrication of multifunctional micromotors in reasonable quantities, encapsulation of desired subsystems, and engineering of FDA-approved core-shell structures with tuneable biological, physical, chemical, and mechanical properties. Microfluidic methods are used to prepare stable bubbles/microbubbles and capsules integrating ultrasound, optoacoustic, fluorescent, and magnetic resonance imaging modalities. The aim here is to discuss an interdisciplinary approach of three independent emerging topics: micromotors, nanozymes, and microfluidics to creatively: 1) embrace new ideas, 2) think across boundaries, and 3) solve problems whose solutions are beyond the scope of a single discipline toward the development of micro-bio-chemo-mechanical-systems for diverse bioapplications.

Biological Mediator-Propelled Nanosweeper for Nonpharmaceutical Thrombus Therapy

Traditional thrombolytic drugs offer limited outcomes due to short circulation half-life and low utilization. Herein, we have designed and constructed a biological mediator-propelled nanosweeper for highly efficient nonpharmaceutical thrombolysis and prevention of thrombus recurrence. Under the near-infrared light irradiation, the nanosweepers were activated to trigger nitric oxide (NO) release, which propelled the nanosweepers to penetrate deeply into the thrombus and resulted in enhanced site-pecific mechanical and photothermal thrombolysis. The experimental evidence confirmed that the ingenious nanosweeper displayed excellent site-specific thrombolytic efficacy even when compared with the clinical thrombolytic drug. In the meantime, as a biological mediator, the release of NO could effectively prevent thrombus recurrence in vivo. Overall, we anticipated that the nanosweeper would provide a promising strategy for the treatment of thrombi.

GOX-hemin nanogels with enhanced cascade activity for sensitive one-step glucose detection

Early glucose detection is important in both healthy people and diabetic patients. The glucose colorimetric detection techniques usually consist of multiple steps and their preparation processes are time consuming. In this work, we fabricate a GOX-hemin nanogel (GHN) that could be used for one-step colorimetry detection of glucose. The GHN was prepared by carrying out polymerization on the surface of GOX. Each GOX-hemin nanogel consists of a single GOX encapsulated with a thin polymer network containing hemin. The proximity of hemin to GOX facilitates two reactions, i.e. the oxidation of glucose catalysed by GOX to yield H₂O₂, and the subsequent 3,3',5,5'-tetramethylbenzidine (TMB) oxidation reaction catalysed by hemin to yield the blue colored product. These processes work in tandem, which greatly enhances the efficacy, sensitivity and stability of the detection system. The limit of detection in our system was determined to be as low as 4 μM. Furthermore, the glucose detection activity still maintained more than 70% even after being incubated at 55 °C for 30 minutes, or in 20% (v/v) aqueous solution of DMF, CH₃CN or THF for 25 minutes at room temperature. It is anticipated that this work can provide a method for developing diverse functional materials based on proteins.

Molecular and heterogeneous water oxidation catalysts: recent progress and joint perspectives

The recent synthetic and mechanistic progress in molecular and heterogeneous water oxidation catalysts highlights the new, overarching strategies for knowledge transfer and unifying design concepts.

The Role of Nanomaterials in Modulating the Structure and Function of Biomimetic Catalysts

Nanomaterial-incorporated enzyme mimics have so far been examined in various cases, and their properties are governed by the properties of both catalysts and materials. This review summarizes recent efforts in understanding the role of inorganic nanomaterials for modulating biomimetic catalytic performance. Firstly, the importance of enzyme mimics, and the necessity for tuning their catalysis will be outlined. Based on structural characteristics, these catalysts are divided into two types: traditional artificial enzymes, and novel nanomaterial-based enzyme mimics. Secondly, the mechanisms on how nano-sized materials interact with these catalysts will be examined. Intriguingly, incorporating various nanomaterials into biomimetic catalysts may provide a convenient and highly efficient method for the modulation of activities as well as stabilities or introduce new and attractive features. Finally, the perspectives of the main challenges and future opportunities in the areas of nanomaterial-incorporated biomimetic catalysis will be discussed. In this regard, nanomaterials as a kind of promising scaffold for tuning catalysis will attract more and more attention and be practically applied in numerous fields.

Epigallocatechin gallate mediated sandwich-like coating for mimicking endothelium with sustained therapeutic nitric oxide generation and heparin release

In-stent restenosis after stenting is generally characterized by an inflammatory response, excessive proliferation of smooth muscle cells, and delayed healing of the endothelium layer. In this study, inspired by catechol/gallol surface chemistry, a sandwich-like layer-by-layer (LBL) coating was developed using chitosan and heparin as polyelectrolytes, along with the embedding of an epigallocatechin gallate/copper (EGCG/Cu) complex. The embedding of EGCG stabilized the coating by various intermolecular interactions in the LBL coating (e.g., π-π stacking, weak intermolecular crosslinking, and enriched hydrogen bonding) and supported the sustained release of the cargo heparin over 90 days. This design enabled a biomimetic endothelium function in terms of the sustained release of heparin and continuous in situ generation of nitric oxide, driven by the catalytic decomposition of endogenous S-nitrostothiols by copper ions. The result showed enhanced durability of anticoagulation and suppressed inflammatory response. Moreover, the "sandwich-like" coating supported the growth of endothelial cells and up-regulated the protein expression of vascular endothelial growth factor, while effectively suppressing the proliferation and migration of smooth muscle cells (SMCs) via the up-regulation of cyclic guanosine monophosphate. Ex vivo and in vivo experiments demonstrated the effectiveness of the sandwich-like coating in preventing thrombosis formation, suppressing the growth of SMCs, reducing the infiltration and activation of inflammatory cells, and ultimately achieving rapid in situ endothelialization. Hence, the EGCG-assisted sandwich-like coating might be used as a robust and versatile surface modification strategy for implantable cardiovascular devices.

Nanozyme-Modified Metal-Organic Frameworks with Multienzymes Activity as Biomimetic Catalysts and Electrocatalytic Interfaces

Many metal-organic frameworks have been designed and synthesized for biosensors because of high surface area and porosity, suitable size, and good biocompatibility. Despite recent advances, however, most of them are only used as a nanocarrier. In this work, a new artificial nanozyme was constructed on a metalloporphyrinic metal-organic framework (PMOF(Fe)), which was formed by Fe porphyrin and Zr⁴⁺ ions. Then, ultrasmall Pt nanoparticles (Pt NPs) were loaded on the surface of PMOF(Fe) to form Pt@PMOF(Fe). Because of the high surface area and exposed Fe activity center, PMOF(Fe) works as a nanocarrier to hinder the Pt NP aggregation and exhibits high peroxidase-mimicking activity. Hence, Pt NPs decorated on the surface of PMOF(Fe) possessed high stability and exhibited high activity. Due to the synergistic effect between PMOF(Fe) and Pt NPs, Pt@PMOF(Fe) exhibits superior catalase- and peroxidase-like activities. Moreover, Pt@PMOF(Fe) possesses high electrocatalytic activity toward the reduction of H₂O₂ and the oxygen reduction reaction (ORR). This strategy may serve as a strong foundation to design MOF-based artificial nanozymes and develop an ideal platform for MOFs and nanozymes toward artificial enzymatic catalytic systems, fuel cells and new analytical applications.

Intensive and Persistent Chemiluminescence System Based on Nano-/Bioenzymes with Local Tandem Catalysis and Surface Diffusion

A chemiluminescence (CL) system with long persistent and intensive emission is essential for accurate CL quantitative analysis and imaging assay. However, with most known CL systems being flash-type, it is still a great challenge to develop long-lasting CL systems. Here, by combining an iron porphyrin metal-organic frameworks (FePorMOFs) based peroxidase mimic with natural glucose oxidase (GOx), an intensive and persistent CL system is presented on the basis of local tandem catalysis and surface diffusion of the nano-/bioenzymes (FePorMOF/GOx). FePorMOF synthesized by iron porphyrin linker and zirconium ion node possesses high peroxidase catalytic activity and stability. Using luminol and glucose as substrate, the FePorMOF/GOx CL system can produce intensive CL emission containing a plateau period of 7.5 h. The strong CL signal is due to the local tandem generation and reaction of H₂O₂ by GOx and FePorMOF, which avoids the diffusion-limited kinetics and leads to a high catalytic efficiency of the nano-/bioenzymes. On the other hand, the long persistent CL emission is attributed mainly to the enzymatic reaction-controlled H₂O₂ supply and surface diffusion-controlled CL reaction. The proposed CL system is explored for CL imaging sensing of glucose and homogeneous immunoassay of α-fetoprotein. The nano-/bioenzymes CL system exhibits intensive and long constant CL emission in physiological condition, showing promising applications in real-time bioassay and bioimaging.

Layer-by-Layer Deposition of Hyaluronan and Quercetin-Loaded Chitosan Nanoparticles onto Titanium for Improving Blood Compatibility

Surface modification is an effective way to improve the hemocompatibility of biomaterials. Quercetin has significant anticoagulation and antithrombotic effects, and thus it is a promising candidate agent for the surface modification of blood-contacting materials. In this study, quercetin was successfully encapsulated in tripolyphosphate–chitosan nanoparticles (TCs) based on the ionic gelation of chitosan with tripolyphosphate (TPP) anions. Then, hyaluronan acid (HA)/quercetin-loaded TPP–chitosan nanoparticle (QTCs) films, in addition to HA/TCs films, were prepared separately using an electrostatic layer-by-layer self-assembly technique. The encapsulation of quercetin in the chitosan nanoparticles was confirmed by UV spectra. The quercetin-loaded multilayer coatings were also successfully self-assembled, as confirmed by the UV spectra and contact angle measurements. Platelet adhesion experiments were carried out with platelet-enriched plasma so as to evaluate the blood compatibility of the different samples. There were many platelets on the surfaces of the glass and HA/TC-coated titanium, which were partially activated but not aggregated. Meanwhile, many more platelets were observed on the uncoated titanium surfaces, most of which developed pseudopodia. By contrast, the platelet adhesion and activation were reduced remarkably on the surface of the HA/QTC-coated titanium. These results showed that the multilayer coatings containing quercetin could act as potential biomaterials to improve the anticoagulation performance of blood-contacting materials.

Therapeutic applications of multifunctional nanozymes

Nanozymes, which are functional nanomaterials with enzyme-like characteristics, have emerged as a highly-stable and low-cost alternative to natural enzymes. Apart from overcoming the limitations of natural enzymes (e.g., high cost, low stability or complex production), nanozymes are also equipped with the unique intrinsic properties of nanomaterials such as magnetism, luminescence or near infrared absorbance. Therefore, the development of nanozymes exhibiting additional functions to their catalytic activity has opened up new opportunities and applications within the biomedical field. To highlight the progress in the field, this review summarizes the novel applications of multifunctional nanozymes in various biomedical-related fields ranging from cancer diagnosis, cancer and antibacterial therapy to regenerative medicine. Future challenges and perspectives that may advance nanozyme research are also discussed at the end of the review.

Micelle-embedded coating with ebselen for nitric oxide generation

Nitric oxide generation is considered to be a key factor to mimic endothelial function in terms of anti-coagulation and anti-hyperplasia. Herein, ebselen which could play the similar role as glutathion peroxidase-like was loaded into micelles and was further assembled into a layer-by-layer coating. The ability of nitric oxide generation and corresponding biological effect were investigated. Endothelial-mimetic surface has now attracted huge attention in blood-contacting materials, due to its inherent ability of secreting nitric oxide. Among those categories, nitric oxide generation surface is considered to be safe and tunable in the modification of vascular biomedical devices. How to adsorb or immobilize glutathion peroxidase-like catalyst and maintain sustained/safe nitric oxide generation is full of interest. This study aimed at developing a functional coating constructed via layer-by-layer assembly to introduce the catalyst into the coating by pre-loading ebselen in micelles. We firstly introduced phenylboronic acid moiety into the micelle molecule backbone and grafted catechol moiety to chitosan backbone. Then, chitosan, micelles (containing ebselen) and heparin were adopted as polyelectrolytes and then alternatively assembled onto the substrate via layer-by-layer protocol. The catechol was conjugated to the amine groups of chitosan by Schiff base reaction to synthesize chitosan-catechol. The hydrophobic cholesterol was conjugated to the one end of the hydrophilic hyaluronic acid, and the hydroxymethylphenylboronic acid was conjugated to the other end via the esterification of carboxyl (-COOH) and hydroxyl (-OH). The modified hyaluronic acid could spontaneously form micelles in aqueous solution. Ebselen was the loaded into the as-prepared micelles. Chitosan-catechol, heparin, and micelles were alternatively assembled onto the substrate layer by layer to form a micelle-embedded coating. The micelle-embedded coating with ebselen was successfully obtained and the nitric oxide generation ability was in a safe level which was close to healthy endothelial cells. The coating could effectively inhibit platelet adhesion and smooth muscle cell proliferation. The use of ebselen preloaded into micelles could provide a sustained release of catalyst for in situ nitric oxide generation. Besides, this method could also be used to load diverse drugs and regulate desired properties. The study was approved by the Institutional Review Board of the West China Hospital in Sichuan University on March 3, 2018, with approval No. K2018044.

Progress in cardiovascular biomaterials

In 1986, the European Society of Biomaterials Consensus Conference gave a simplified definition of biomaterials as “a non-viable material used in a medical device intended to interact with biological systems”. This seems to be more appropriate when we look into the versatility of applications of biomaterials in the health sector, especially in cardiovascular practice. This field has expanded exponentially in every direction, with multifunctional capability. Heart valves have undergone an evolution in biomaterials and design. Patches and conduits have been developed to correct anatomical deficits, and solutions have been found for narrowing or ballooning of the arteries. Research is ongoing to find replacements for every part of this system by creating replicas made of various materials. To investigate problems pertaining to the cardiovascular system, catheters have undergone an astounding leap in material optimization. In these three sectors, the trends, successes, and failures are worth discussing. This review mainly focuses on the types of biomaterial used for making cardiovascular devices and their advantages and limitations.

Two-Dimensional Metal-Organic Framework/Enzyme Hybrid Nanocatalyst as a Benign and Self-Activated Cascade Reagent for in Vivo Wound Healing

Metal-organic frameworks (MOFs)-based peroxidase mimics have been seldom applied in the biomedical field, especially in vivo. One of the main reasons is their optimum reactions occur in strong acidic environments with a pH of 3-4, severely limiting their applications in living systems where neutral pH is usually required. Other types of peroxidase mimics also suffer such a fatal defect. Additionally, the direct introduction of the relatively high concentrated and toxic reaction reagent H₂O₂ would induce undesired damage to normal tissues. Herein, a MOF-based hybrid nanocatalyst as a benign and self-activated cascade reagent has been constructed. Owing to better catalytic performance compared with three-dimensional bulk MOF, an ultrathin two-dimensional (2D) MOF (2D Cu-TCPP(Fe)) nanosheet is chosen as a model of peroxidase mimic to physically adsorb glucose oxidase (GOx) for fabricating such a hybrid nanocatalyst. Nontoxic glucose can be continuously converted into abundant gluconic acid and H₂O₂ by GOx, avoiding the direct use of relatively high concentrated and toxic H₂O₂ and minimizing the harmful side effects. The generated gluconic acid can decrease the pH value from 7 to 3-4, dramatically activating the peroxidase-like activity of 2D Cu-TCPP(Fe) nanosheets. Meanwhile, the produced H₂O₂ is used for subsequent catalysis of activated 2D Cu-TCPP(Fe) nanosheets, leading to efficient generation of an extremely toxic hydroxyl radial and antibacterial capacity. In vitro and in vivo results illustrate the designed benign and self-activated cascade reagent possesses a robust antibacterial effect with negligible biotoxicity.

An Albumin Biopassive Polyallylamine Film with Improved Blood Compatibility for Metal Devices

Nowadays, a variety of materials are employed to make numerous medical devices, including metals, polymers, ceramics, and others. Blood-contact devices are one of the major classes of these medical devices, and they have been widely applied in clinical settings. Blood-contact devices usually need to have good mechanical properties to maintain clinical performance. Metal materials are one desirable candidate to fabricate blood-contact devices due to their excellent mechanical properties and machinability, although the blood compatibility of existing blood-contact devices is better than other medical devices, such as artificial joints and artificial crystals. However, blood coagulation still occurs when these devices are used in clinical settings. Therefore, it is necessary to develop a new generation of blood-contact devices with fewer complications, and the key factor is to develop novel biomaterials with good blood compatibility. In this work, one albumin biopassive polyallylamine film was successfully established onto the 316L stainless steel (SS) surface. The polyallylamine film was prepared by plasma polymerization in the vacuum chamber, and then polyallylamine film was annealed at 150 °C for 1 h. The chemical compositions of the plasma polymerized polyallylamine film (PPAa) and the annealed polyallylamine film (HT-PPAa) were characterized by Fourier transform infrared spectrum (FTIR). Then, the wettability, surface topography, and thickness of the PPAa and HT-PPAa were also evaluated. HT-PPAa showed increased stability when compared with PPAa film. The major amino groups remained on the surface of HT-PPAa after annealing, indicating that this could be a good platform for numerous molecules' immobilization. Subsequently, the bovine serum albumin (BSA) was immobilized onto the HT-PPAa surface. The successful introduction of the BSA was confirmed by the FTIR and XPS detections. The blood compatibility of these modified films was evaluated by platelets adhesion and activation assays. The number of the platelets that adhered on BSA-modified HT-PPAa film was significantly decreased, and the activation degree of the adhered platelets was also decreased. These data revealed that the blood compatibility of the polyallylamine film was improved after BSA immobilized. This work provides a facile and effective approach to develop novel surface treatment for new-generation blood-contact devices with improved hemocompatibility.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

eg occupancy as an effective descriptor for the catalytic activity of perovskite oxide-based peroxidase mimics

A peroxidase catalyzes the oxidation of a substrate with a peroxide. The search for peroxidase-like and other enzyme-like nanomaterials (called nanozymes) mainly relies on trial-and-error strategies, due to the lack of predictive descriptors. To fill this gap, here we investigate the occupancy of e_g orbitals as a possible descriptor for the peroxidase-like activity of transition metal oxide (including perovskite oxide) nanozymes. Both experimental measurements and density functional theory calculations reveal a volcano relationship between the e_g occupancy and nanozymes’ activity, with the highest peroxidase-like activities corresponding to e_g occupancies of ~1.2. LaNiO_3-δ, optimized based on the e_g occupancy, exhibits an activity one to two orders of magnitude higher than that of other representative peroxidase-like nanozymes. This study shows that the e_g occupancy is a predictive descriptor to guide the design of peroxidase-like nanozymes; in addition, it provides detailed insight into the catalytic mechanism of peroxidase-like nanozymes.

The search for peroxidase-like as well as other enzyme-like nanozymes mainly relies on trial-and-error strategies, due to the lack of predictive descriptors. Here, the authors fill this gap by investigating the occupancy of e_g orbitals as a possible descriptor for the peroxidase-like activity of transition metal oxide nanozymes

A multifunctional mesoporous silica-gold nanocluster hybrid platform for selective breast cancer cell detection using a catalytic amplification-based colorimetric assay

Breast cancer is the most common malignancy and also the second leading cause of cancer mortality in women globally. Strategies for early and precise detection of breast cancer cells are highly desired in breast cancer diagnosis and treatment. Here, we report on the efficient detection of HER2-positive (HER2+) breast cancer cells using an amplified signal scheme enabled by gold nanoclusters entrapped in mesoporous silica nanoparticles (MSNs). The utilization of MSNs as an excellent enzyme immobilization support and gold nanoclusters as an effective peroxidase mimic imparts high sensitivity to this detection platform. In addition, the inclusion of target-specific HER2 antibodies adds excellent selectivity. Determination of HER2+ cancer cells in breast cancer tissue demonstrates the potential application of this biosensor design in clinical diagnosis in particular, and bioanalysis in general.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

Recent Advances in Catalyzed Sequential Reactions and the Potential Use of Tetrapyrrolic Macrocycles as Catalysts

Complexes of porphyrins and of other similar tetrapyrrolic macrocycles are extensively explored as catalysts for different chemical processes, and the development of solid catalysts for heterogeneous processes using molecules with the ability to act as multifunctional catalysts in one-pot reactions is increasing and can lead to the wider use of this class of molecules as catalysts. This mini review focuses on the application of this class of complexes as catalysts in a variety of sequential one-pot reactions.

Integrated nanozymes: facile preparation and biomedical applications

Nanozymes have been viewed as the next generation of artificial enzymes due to their low cost, large specific surface area, and good robustness under extreme conditions. However, the moderate activity and limited selectivity of nanozymes have impeded their usage. To overcome these shortcomings, integrated nanozymes (INAzymes) have been developed by encapsulating two or more different biocatalysts (e.g., natural oxidases and peroxidase mimics) together within confined frameworks. On the one hand, with the assistance of natural enzymes, INAzymes are capable of specifically recognizing targets. On the other hand, nanoscale confinement brought about by integration significantly enhances the cascade reaction efficiency. In this Feature Article, we highlight the newly developed INAzymes, covering from synthetic strategies to versatile applications in biodetection and therapeutics. Moreover, it is predicted that INAzymes with superior activities, specificity, and stability will enrich the research of nanozymes and pave new ways in designing multifunctional nanozymes.

ROS scavenging Mn3O4 nanozymes for in vivo anti-inflammation

Reactive oxygen species (ROS) scavenging Mn₃O₄ nanozymes effectively protected live mice from ROS-induced ear-inflammation in vivo.

Reactive oxygen species (ROS)-induced oxidative stress is linked to various diseases, including cardiovascular disease and cancer. Though highly efficient natural ROS scavenging enzymes have been evolved, they are sensitive to environmental conditions and hard to mass-produce. Therefore, enormous efforts have been devoted to developing artificial enzymes with ROS scavenging activities. Among them, ROS scavenging nanozymes have recently attracted great interest owing to their enhanced stability, multi-functionality, and tunable activity. It has been implicated that Mn-contained nanozymes would possess efficient ROS scavenging activities, however only a few such nanozymes have been reported. To fill this gap, herein we demonstrated that Mn₃O₄ nanoparticles (NPs) possessed multiple enzyme mimicking activities (i.e., superoxide dismutase and catalase mimicking activities as well as hydroxyl radical scavenging activity). The Mn₃O₄ nanozymes therefore significantly scavenged superoxide radical as well as hydrogen peroxide and hydroxyl radical. Moreover, they were not only more stable than the corresponding natural enzymes but also superior to CeO₂ nanozymes in terms of ROS elimination. We showed that the Mn₃O₄ NPs not only exhibited excellent ROS removal efficacy in vitro but also effectively protected live mice from ROS-induced ear-inflammation in vivo. These results indicated that Mn₃O₄ nanozymes are promising therapeutic nanomedicine for treating ROS-related diseases.

Reversible pH switchable oxidase-like activities of MnO2 nanosheets for a visual molecular majority logic gate

The oxidase-like activities of MnO₂ nanosheets are pH switchable and reversible, which are applied for the fabrication of a visual molecular majority logic gate.

From sequential chemoenzymatic synthesis to integrated hybrid catalysis: taking the best of both worlds to open up the scope of possibilities for a sustainable future

Here an overview of all pathways that integrate chemical and biological catalysis is presented. We emphasize the factors to be considered in order to understand catalytic synergy.

Preparation and application of N-doped carbon nanotube arrays on graphene fibers

A new kind of carbon hybrid material with a unique structure and outstanding mechanical and functional properties is reported in this article. Nitrogen-doped carbon nanotube (CNT) arrays with inside located Ni particles are in situ grown on the surface of phenolic carbon modified graphene fibers during their conversion from graphene oxide fibers. The carbon hybrid fibers exhibit not only high tensile strength and elongation at the break, but also excellent flexibility since the CNT arrays cover all the surface of the highly strong graphene fiber. This well-constructed carbon material would be suitable for catalysts, polymer composites, hydrogen storage, oxygen reduction reaction etc.

Substrate mediated enzyme prodrug therapy

Substrate mediated enzyme prodrug therapy (SMEPT) is a biomedical platform developed to perform a localized synthesis of drugs mediated by implantable biomaterials. This approach combines the benefits and at the same time offers to overcome the drawbacks for traditional pill-based drug administration and site-specific, implant mediated drug delivery. Specifically, SMEPT offers the flexibility of delivering multiple drugs - individually as monotherapy, in sequence, or as a combination therapy, all of which is also accomplished in a site-specific manner. This technology is also unique for site-specific synthesis of drugs with short half-life, such as nitric oxide. This review presents historical development of SMEPT from early reports to the most recent examples, and also outlines potential avenues for subsequent development of this platform.

Target-triggered cascade assembly of a catalytic network as an artificial enzyme for highly efficient sensing

Determining the catalytic activity of artificial enzymes is an ongoing challenge. In this work, we design a porphyrin-based enzymatic network through the target-triggered cascade assembly of catalytic nanoparticles. The nanoparticles are synthesized via the covalent binding of hemin to amino-coated gold nanoparticles and then the axial coordination of the Fe center with a dual-functional imidazole or pyridine derivative. The network, which is specifically formed by coordination polymerization triggered by Hg2+ as the target, shows high catalytic activity due to the triple amplification of enzymatic activity during the cascade assembly. The catalytic dynamics are comparable to those of natural horseradish peroxidase. The catalytic characteristics can be ultrasensitively regulated by the target, leading to a selective methodology for the analysis of sub-attomolar Hg2+. It has also been used for "signal-on" imaging of reactive oxygen species in living cells. This work provides a new avenue for the design of enzyme mimics, and a powerful biocatalyst with signal switching for the development of biosensing protocols.

Surface-Enhanced Raman Scattering Active Gold Nanoparticles with Enzyme-Mimicking Activities for Measuring Glucose and Lactate in Living Tissues

Gold nanoparticles (AuNPs) with simultaneous plasmonic and biocatalytic properties provide a promising approach to developing versatile bioassays. However, the combination of AuNPs' intrinsic enzyme-mimicking properties with their surface-enhanced Raman scattering (SERS) activities has yet to be explored. Here we designed a peroxidase-mimicking nanozyme by in situ growing AuNPs into a highly porous and thermally stable metal-organic framework called MIL-101. The obtained AuNPs@MIL-101 nanozymes acted as peroxidase mimics to oxidize Raman-inactive reporter leucomalachite green into the active malachite green (MG) with hydrogen peroxide and simultaneously as the SERS substrates to enhance the Raman signals of the as-produced MG. We then assembled glucose oxidase (GOx) and lactate oxidase (LOx) onto AuNPs@MIL-101 to form AuNPs@MIL-101@GOx and AuNPs@MIL-101@LOx integrative nanozymes for in vitro detection of glucose and lactate via SERS. Moreover, the integrative nanozymes were further explored for monitoring the change of glucose and lactate in living brains, which are associated with ischemic stroke. The integrative nanozymes were then used to evaluate the therapeutic efficacy of potential drugs (such as astaxanthin for alleviating cerebral ischemic injuries) in living rats. They were also employed to determine glucose and lactate metabolism in tumors. This study not only demonstrated the great promise of combining AuNPs' multiple functionalities for versatile bioassays but also provided an interesting approach to designing nanozymes for biomedical and catalytic applications.

Boosting the Peroxidase-Like Activity of Nanostructured Nickel by Inducing Its 3+ Oxidation State in LaNiO3 Perovskite and Its Application for Biomedical Assays

Catalytic nanomaterials with intrinsic enzyme-like activities, called nanozymes, have recently attracted significant research interest due to their unique advantages relative to natural enzymes and conventional artificial enzymes. Among the nanozymes developed, particular interests have been devoted to nanozymes with peroxidase mimicking activities because of their promising applications in biosensing, bioimaging, biomedicine, etc. Till now, lots of functional nanomaterials have been used to mimic peroxidase. However, few studies have focused on the Ni-based nanomaterials for peroxidase mimics. In this work, we obtained the porous LaNiO₃ nanocubes with high peroxidase-like activity by inducing its 3+ oxidation state in LaNiO₃ perovskite and optimizing the morphology of LaNiO₃ perovskite. The peroxidase mimicking activity of the porous LaNiO₃ nanocubes with Ni³⁺ was about 58~fold and 22~fold higher than that of NiO with Ni²⁺ and Ni nanoparticles with Ni⁰. More, the porous LaNiO₃ nanocubes exhibited about 2-fold higher activity when compared with LaNiO₃ nanoparticles. Based on the superior peroxidase-like activity of porous LaNiO₃ nanocubes, facile colorimetric assays for H₂O₂, glucose, and sarcosine detection were developed. Our present work not only demonstrates a useful strategy for modulating nanozymes' activities but also provides promising bioassays for clinical diagnostics.

Aortic Graft Infection: Graphene Shows the Way to an Infection-Resistant Vascular Graft

Aortic graft infection is a potentially lethal complication of open and endovascular repair of aortic aneurysms. Graphene is the only existing two-dimensional material, and its unique structure gives graphene and its derivatives a plethora of original characteristics. Among other characteristics, graphene demonstrates bacteriostatic and bactericidal effects that could potentially resolve the problem of graft infection in the future. Data already exist in literature supporting this antibacterial effect of graphene oxide and reduced graphene oxide. Combining these materials with other substances enhances the antibacterial effect. Additionally, it looks feasible to expect antibiotic-delivering graphene-based graft materials in the future. Based on already published data, we could conclude that regarding graphene and its derivatives, the blessing of bactericidal effect comes with the curse of human cells toxicity. Therefore, it is important to find a fine balance between the desired antibacterial and the adverse cytotoxic effect before graphene is used in graft materials for humans.

Current Status and Bioinspired Perspective of Electrochemical Conversion of CO2 to a Long-Chain Hydrocarbon

Electrocatalytic conversion of CO₂ into a long-chain hydrocarbon represents an important research direction in adding value to CO₂-based chemicals and realizing its practical application. Long-chain hydrocarbons may change the current fossil fuel-based industry in that those chemicals have a similar energy density as gasoline, high compatibility with the current infrastructure, and low hydroscopicity for pipeline distribution. However, most of the electrocatalysts produce C₁, C₂, and C₃ chemicals, and methods for producing long-chain hydrocarbons are not available thus far. Interestingly, nature utilizes many enzymes to generate long-chain hydrocarbons using C₂ building blocks and suggests key mechanisms, inspiring new perspective in the design of electrocatalysts. In this Perspective, we present case studies to demonstrate how CO₂ and its reductive derivatives interact with the electrode surface during C-C bond formation and introduce how these issues are addressed in biological systems. We end this Perspective by outlining possible strategies to translate the natural mechanism into a heterogeneous electrode.

Protein-Directed Synthesis of Bifunctional Adsorbent-Catalytic Hemin-Graphene Nanosheets for Highly Efficient Removal of Dye Pollutants via Synergistic Adsorption and Degradation

Herein, for the first time, we report a "green", one-pot reduction/decoration method for the synthesis of bifunctional adsorbent-catalytic hemin-graphene nanosheets by using a common available protein (bovine serum albumin, BSA) as both a reductant and a stabilizer. Our prepared nanosheets are highly stable and possess intrinsic peroxidase-like catalytic activity due to the decoration of BSA and hemin. Furthermore, benefiting from the combined advantages of graphene and BSA, these nanosheets are able to efficiently adsorb dye pollutants from aqueous solution. More importantly, due to their adsorption and catalytic ability, these adsorbent-catalytic nanosheets can be applied to highly efficient dye removal via synergistic adsorption and degradation. Specifically, our catalysts can easily bring organic dyes to their surface by adsorption, and then activate H₂O₂ to generate hydroxyl radicals, leading to the degradation of the dyes. Such catalytic mechanism of our as-prepared nanosheets was analogous to that of natural enzymes, in which the extremely high catalytic efficiency is largely dependent upon their ability to bring substrates in close proximity to the active sites of enzymes. Our finding may open new potential applications of hemin-graphene hybrid nanosheets in environmental chemistry, biotechnology, and medicine.

The Potential Role of Graphene in Developing the Next Generation of Endomaterials

Graphene is the first 2-dimensional material and possesses a plethora of original properties. Graphene and its derivatives have exhibited a great potential in a number of fields, both medical and nonmedical. The aim of this review is to set the theoretical basis for further research in developing graphene-based endovascular materials. An extensive search was performed in medical and bioengineering literature. Published data on other carbon materials, as well as limited data from medical use of graphene, are promising. Graphene is a promising future material for developing novel endovascular materials. Certain issues as biocompatibility, biotoxicity, and biostability should be explored further.

Water-Floating Giant Nanosheets from Helical Peptide Pentamers

One of the important challenges in the development of protein-mimetic materials is understanding the sequence-specific assembly behavior and dynamic folding change. Conventional strategies for constructing two-dimensional (2D) nanostructures from peptides have been limited to using β-sheet forming sequences as building blocks due to their natural tendency to form sheet-like aggregations. We have identified a peptide sequence (YFCFY) that can form dimers via a disulfide bridge, fold into a helix, and assemble into macroscopic flat sheets at the air/water interface. Due to the large driving force for 2D assembly and high elastic modulus of the resulting sheet, the peptide assembly induces flattening of the initially round water droplet. Additionally, we found that stabilization of the helix by dimerization is a key determinant for maintaining macroscopic flatness over a few tens of centimeters even with a uniform thickness of <10 nm. Furthermore, the ability to transfer the sheets from a water droplet to another substrate allows for multiple stacking of 2D peptide nanostructures, suggesting possible applications in biomimetic catalysis, biosensors, and 2D related electronic devices.