Giant negative linear compression positively coupled to massive thermal expansion in a metal–organic framework

Compositional dependence of uniaxial zero thermal expansion and zero linear compressibility in metal-organic framework MIL-122 (Al, Ga, In)

The responses of MIL-122(Al, Ga, In) to pressure or temperature have been investigated. The findings suggest that the a-axis in the lattice exhibits minimal compressibility, particularly zero linear compressibility (ZLC) behavior observed in MIL-122(In), consistent with experimental reports. Additionally, as the radius of metal atoms increases, the compressibility of the b-axis and c-axis gradually strengthens. There is a notable compositional dependence on volume thermal expansion in MIL-122(Al, Ga, In), where an increase in the metal atom radius leads to gradual weakening of volume thermal expansion. In particular, MIL-122(In) demonstrates pronounced volume negative thermal expansion (NTE) behavior, with the a-axis displaying zero thermal expansion (ZTE) behavior and both the b-axis and c-axis exhibiting NTE behavior. The temperature-dependent relative change in the bulk modulus of MIL-122(Al, Ga, In) has also been explored, revealing abnormal thermal hardening specifically within MIL-122(Ga, In). We attribute these unique uniaxial ZTE and ZLC behaviors in MIL-122(In) to its distinctive wine-rack topology, anomalous phonons (negative Grüneisen parameters), and internal structural flexibility.

Metal-free negative linear compressibility (NLC) material - the cocrystal of 1,2-bis(4-pyridyl)ethane and fumaric acid

Materials that show significant negative linear compressibility (NLC) reported so far suffer from a number of shortcomings that affect their applicability. The cocrystal of 1,2-bis(4-pyridyl)ethane and fumaric acid, which exhibits exceptional NLC behaviour, overcomes these problems and sets the foundation for the development of environmentally friendly metal-free NLC materials.

Regulating Planarized Intramolecular Charge Transfer for Efficient Single-Phase White-Light Emission in Undoped Metal-Organic Framework Nanocrystals

The technology of combining multiple emission centers to exploit white-light-emitting (WLE) materials by taking advantage of porous metal-organic frameworks (MOFs) is mature, but preparing undoped WLE MOFs remains a challenge. Herein, a pressure-treated strategy is reported to achieve efficient white photoluminescence (PL) in undoped [Zn(Tdc)(py)]n nanocrystals (NCs) at ambient conditions, where the Commission International del'Eclairage coordinates and color temperature reach (0.31, 0.37) and 6560 K, respectively. The initial [Zn(Tdc)(py)]n NCs exhibit weak-blue PL consisting of localized excited (LE) and planarized intramolecular charge transfer (PLICT) states. After pressure treatment, the emission contributions of LE and PLICT states are balanced by increasing the planarization of subunits, thereby producing white PL. Meanwhile, the reduction of nonradiative decay triggered by the planarized structure results in 5-fold PL enhancement. Phosphor-converted light-emitting diodes based on pressure-treated samples show favorable white-light characteristics. The finding provides a new platform for the development of undoped WLE MOFs.

Noncovalent Interactions and Transverse Vibration Induced Restricted Thermal Expansion of Organic Salts Derived from Imidazole and Carboxylic Acids

Design of material showing contraction upon heating is highly challenging due to varying mechanism. However, imidazole is found to be a potential molecule that may provide low CTE materials when incorporated in the matrix. Here we have reported thermal expansion property of imidazolium salts of five aliphatic α, ω-alkane dicarboxylic acids and three aromatic acids. Either uniaxial or biaxial negative thermal expansion (NTE) has been observed in most of the salts. In some cases, axial zero thermal expansion (ZTE) has been observed. The role of imidazolium moiety for the anomalous thermal expansion behaviour of the salts has been analyzed in this study. The controlled TE behaviour of the salts is attributed to the hydrogen bonding and transverse vibration in all imidazolium salts. Owing to the high transverse vibration observed in imidazolium ion as well as the heavier oxygen atoms of acids in each case, the distance between hydrogen bonded atoms decreases-which provides either low expansion or contraction along one of the principal axes.

Bubbles enable volumetric negative compressibility in metastable elastocapillary systems

Although coveted in applications, few materials expand when subject to compression or contract under decompression, i.e., exhibit negative compressibility. A key step to achieve such counterintuitive behaviour is the destabilisations of (meta)stable equilibria of the constituents. Here, we propose a simple strategy to obtain negative compressibility exploiting capillary forces both to precompress the elastic material and to release such precompression by a threshold phenomenon - the reversible formation of a bubble in a hydrophobic flexible cavity. We demonstrate that the solid part of such metastable elastocapillary systems displays negative compressibility across different scales: hydrophobic microporous materials, proteins, and millimetre-sized laminae. This concept is applicable to fields such as porous materials, biomolecules, sensors and may be easily extended to create unexpected material susceptibilities.

Unconventional mechanical and thermal behaviours of MOF CALF-20

CALF-20 was recently identified as a benchmark sorbent for CO2 capture at the industrial scale, however comprehensive atomistic insight into its mechanical/thermal properties under working conditions is still lacking. In this study, we developed a general-purpose machine-learned potential (MLP) for the CALF-20 MOF framework that predicts the thermodynamic and mechanical properties of the structure at finite temperatures within first-principles accuracy. Interestingly, CALF-20 was demonstrated to exhibit both negative area compression and negative thermal expansion. Most strikingly, upon application of the tensile strain along the [001] direction, CALF-20 was shown to display a distinct two-step elastic deformation behaviour, unlike typical MOFs that undergo plastic deformation after elasticity. Furthermore, this MOF was shown to exhibit a fracture strain of up to 27% along the [001] direction at room temperature comparable to that of MOF glasses. These abnormal thermal and mechanical properties make CALF-20 as attractive material for flexible and stretchable electronics and sensors.

Negative linear compressibility and strong enhancement of emission in Eu[Ag(CN)2]3·3H2O under pressure

The framework material Eu[Ag(CN)2]3·3H2O exhibits a negative linear compressibility (NLC) of -4.2(1) TPa-1 over the largest pressure range yet observed (0-8.2 GPa). High-pressure single-crystal X-ray diffraction data show that the rapid contraction of the Kagome silver layers under compression causes the wine-rack lattice to expand along the c-axis. The hydrogen bonds between the water molecules and the main frameworks constrain the structural deformation under pressure and eventually a weak NLC effect generated. Furthermore, we found that the pressure-induced emission intensity increases almost 800-fold at 4.0 GPa, followed by a gradual decrease and disappearance at 8.1 GPa. Under compression, high pressure significantly tunes the triplet level positions near the Eu3+ ions, and horizontal displacement between a quenching excited state and the excited levels of Eu3+ facilitates the energy transfer process to the 5D0 excited state and limits the nonradiative corssover at elevated pressures, thus increasing the emission intensity. In addition, we observe a gradual band gap reduction with increasing pressure, and the sample could not be returned to the initial state after the pressure was completely released. By controlling the structural flexibility, we observe a coupled NLC and pressure-induced strong enhancement of the emission properties of Eu[Ag(CN)2]3·3H2O, which provides a new route for the design of new optical devices with intriguing luminescence properties under extreme environments.

Pressure effect on the magnetism and crystal structure of magnetoelectric metal-organic framework [CH3NH3][Co(HCOO)3]

[CH3NH3][Co(HCOO)3] is the first perovskite-like metal-organic framework exhibiting spin-driven magnetoelectric effects. However, the high-pressure tuning effects on the magnetic properties and crystal structure of [CH3NH3][Co(HCOO)3] have not been studied. In this work, alongside ac magnetic susceptibility measurements, we investigate the magnetic transition temperature evolution under high pressure. Upon increasing the pressure from atmospheric pressure to 0.5 GPa, TN (15.2 K) remains almost unchanged. Continuing to compress the sample results in TN gradually decreasing to 14.8 K at 1.5 GPa. This may be due to pressure induced changes in the bond distance and bond angle of the O-C-O superexchange pathway. In addition, by using high pressure powder X-ray diffraction and Raman spectroscopy, we conducted in-depth research on the pressure dependence of the lattice parameters and Raman modes of [CH3NH3][Co(HCOO)3]. The increase in pressure gives rise to a phase transition from the orthorhombic Pnma to a monoclinic phase at approximately 6.13 GPa. Our study indicates that high pressure can profoundly alter the crystal structure and magnetic properties of perovskite type MOF materials, which could inspire new endeavors in exploring novel phenomena in compressed metal-organic frameworks.

Investigating the mechanical stability of flexible metal-organic frameworks

As we continue to develop metal-organic frameworks (MOFs) for potential industrial applications, it becomes increasingly imperative to understand their mechanical stability. Notably, amongst flexible MOFs, structure-property relationships regarding their compressibility under pressure remain unclear. In this work, we conducted in situ variable pressure powder X-ray diffraction (PXRD) measurements up to moderate pressures (<1 GPa) using a synchrotron source on two families of flexible MOFs: (i) NU-1400 and NU-1401, and (ii) MIL-88B, MIL-88B-(CH3)2, and MIL-88B-(CH3)4. In this project scope, we found a positive correlation between bulk moduli and degree of flexibility, where increased rigidity (e.g., smaller swelling or breathing amplitude) arising from steric hindrance was deleterious, and observed reversibility in the unit cell compression of these MOFs. This study serves as a primer for the community to begin to untangle the factors that engender flexible frameworks with mechanical resilience.

Colossal negative thermal expansion in a cucurbit[8]uril-enabled uranyl-organic polythreading framework via thermally induced relaxation

It is an ongoing goal to achieve the effective regulation of the thermal expansion properties of materials. In this work, we propose a method for incorporating host-guest complexation into a framework structure and construct a flexible cucurbit[8]uril uranyl-organic polythreading framework, U₃(bcbpy)₃(CB8). U₃(bcbpy)₃(CB8) can undergo huge negative thermal expansion (NTE) and has a large volumetric coefficient of -962.9 × 10^-6 K^-1 within the temperature range of 260 K to 300 K. Crystallographic snapshots of the polythreading framework at various temperatures reveal that, different from the intrinsic transverse vibrations of the subunits of metal-organic frameworks (MOFs) that experience NTE via a well-known hinging model, the remarkable NTE effect observed here is the result of a newly-proposed thermally induced relaxation process. During this process, an extreme spring-like contraction of the flexible CB8-based pseudorotaxane units, with an onset temperature of ∼260 K, follows a period of cumulative expansion. More interestingly, compared with MOFs that commonly have relatively strong coordination bonds, due to the difference in the structural flexibility and adaptivity of the weakly bonded U₃(bcbpy)₃(CB8) polythreading framework, U₃(bcbpy)₃(CB8) shows unique time-dependent structural dynamics related to the relaxation process, the first time this has been reported in NTE materials. This work provides a feasible pathway for exploring new NTE mechanisms by using tailored supramolecular host-guest complexes with high structural flexibility and has promise for the design of new kinds of functional metal-organic materials with controllable thermal responsive behaviour.

Pressure-Induced Structural Effects in the Square Lattice () Topology Coordination Network Sql-1-Co-NCS·4OX

A high-pressure study of a switching coordination network of square lattice topology (sql) loaded with o-xylene (OX), [Co(4,4'-bipyridine)₂(NCS)₂] _n ·4nC₈H₁₀ (sql-1-Co-NCS·4OX), was conducted up to approximately 1 GPa to investigate pressure-induced structural changes. Previous reports revealed that sql-1-Co-NCS exhibits multiple phases thanks to its ability to switch between closed (nonporous) and several open (porous) phases in the presence of various gases, vapors, and liquids. Networks of such properties are of topical interest because they can offer high working capacity and improved recyclability for gas adsorption. The monoclinic crystal structure of sql-1-Co-NCS·4OX at 100 K was previously reported to show an increase in interlayer separation of more than 100% compared to the corresponding closed phase, sql-1-Co-NCS, when exposed to gases or vapors under ambient conditions. Herein, a tetragonal crystal form of sql-1-Co-NCS·4OX (space group I4/mmm, Phase I) that exists at 0.1 MPa/303 K is reported. Exposure of Phase I to high pressure using penetrable pressure transmitting media (OX and 1:1 vol MeOH/EtOH) did not result in further separation of the sql networks. Rather, compression of the crystals and release of adsorbed OX molecules occurred. These pressure-induced changes are discussed in terms of structural voids, framework conformation, and molecular packing of the sql layers. Although Phase I retained tetragonal symmetry throughout the investigated pressure range, the interlayer voids occupied by OX molecules were significantly reduced between 0.3 and 0.5 GPa; further compression above 0.5 GPa induced structural disorder. Additionally, analysis of the electron count present in the pores of sql-1-Co-NCS confirmed the multistep evacuation of OX molecules from the crystal, and two intermediate phases, Ia and Ib, differing in the OX loading level, are postulated.

Negative Thermal Expansion of Undulating Coordination Layers through Interlayer Interaction

The negative thermal expansion (NTE) of solid-state materials is of significance in various fields, but a very rare phenomenon. In this study, we carried out a meta-analysis for the anisotropic thermal expansion behavior of fifteen two-dimensional coordination polymers [M(salen)]₂[M'(CN)₄(solvent)] (M = Mn, Fe; M' = MnN, ReN, Pt, Pt(I₂)_x; x = 0.18, 0.45, 0.85, 1.0; solvent = H₂O, MeOH, MeCN) with a newly synthesized [Fe(salen)]₂[MnN(CN)₄(MeCN)]. Consequently, we successfully demonstrate the unusual NTE of the undulating coordination layers by an expansion deformation of the layers via strong interlayer interaction within the layer stacking. Notably, the layer volume of [Mn(salen)]₂[ReN(CN)₄] with its powder form decreases with a large NTE coefficient, α_layer-volume = -27 × 10^-6 K^-1 (100-500 K). This is a significantly large value despite the increase in layer thickness along the layer contraction based on the anisotropic transformation of undulating layers. Conversely, the analysis demonstrates that the chemical modification of the layers to enhance intralayer interaction rather than interlayer interaction switches a direction of the layer anisotropy, yielding positive thermal expansion materials with the coefficient of the layer volume reaching +92 × 10^-6 K^-1.

Reduced thermal expansion by surface-mounted nanoparticles in a pillared-layered metal-organic framework

Control of thermal expansion (TE) is important to improve material longevity in applications with repeated temperature changes or fluctuations. The TE behavior of metal-organic frameworks (MOFs) is increasingly well understood, while the impact of surface-mounted nanoparticles (NPs) on the TE properties of MOFs remains unexplored despite large promises of NP@MOF composites in catalysis and adsorbate diffusion control. Here we study the influence of surface-mounted platinum nanoparticles on the TE properties of Pt@MOF (Pt@Zn₂(DP-bdc)₂dabco; DP-bdc^2-=2,5-dipropoxy-1,4-benzenedicarboxylate, dabco=1,4-diazabicyclo[2.2.2]octane). We show that TE is largely retained at low platinum loadings, while high loading results in significantly reduced TE at higher temperatures compared to the pure MOF. These findings support the chemical intuition that surface-mounted particles restrict deformation of the MOF support and suggest that composite materials exhibit superior TE properties thereby excluding thermal stress as limiting factor for their potential application in temperature swing processes or catalysis.

Negative Linear Compressibility in Organic-Inorganic Hybrid Perovskite [NH2NH3]X(HCOO)3 (X = Mn, Fe, Co)

Hybrid organic-inorganic perovskites [NH₂NH₃][X(HCOO)₃] (X = Mn, Fe, Co) have a so-called "wine-rack" type of geometry that could give origin to the rare property of negative linear compressibility, which is an exotic and highly desirable material response. We use first-principles density functional theory computations to probe the response of these materials to hydrostatic pressure and predict that, indeed, all three of them exhibit negative linear compressibility above a critical pressure of 1 GPa. Calculations reveal that, under pressure, XO₆ octahedra and -HCOO ligands remain relatively rigid while XO₆ octahedra tilt significantly, which leads to highly anisotropic mechanical properties and expansion along certain directions. These trends are common for the three materials considered.

Negative linear compressibility in Se at ultra-high pressure above 120 GPa

A series of in situ synchrotron X-ray diffraction (XRD) measurements were carried out, combined with first-principles calculations, to study structural phase transitions of selenium at high pressures and room temperature. Several phase transitions were observed, among which an isostructural phase transition was found at around 120 GPa for the first time. Evolved from the rhombohedral (space group R 3 m) structure (Se-V), the new phase (Se-V') exhibited an interesting increase of lattice parameter a at pressures from 120 to 148 GPa, known as negative linear compressibility (NLC). The discovery of NLC behavior observed in this work is mainly attributed to the accuracy and fine steps controlled by the membrane system for in situ XRD data collected with an exposure time of 0.5 s. After 140 GPa, a body-centered cubic (b.c.c.) structure Se-VI (space group Im 3 m) was formed, which remains stable up to 210 GPa, the highest pressure achieved in this study. The bulk moduli of phases Se-V, Se-V' and Se-VI were estimated to be 83 ± 2, 321 ± 2 and 266 ± 7 GPa, respectively, according to the P-V curve fit by the third-order Birch-Murnaghan equation of state. The Se-V' phase shows a bulk modulus almost 4 times larger than that of the Se-V phase, which is mainly due to the effect of its NLC. NLC in a higher pressure range is always more significant in terms of fundamental mechanism and new materials discovery, yet it has barely been reported at pressures above 100 GPa. This will hopefully inspire future studies on potential NLC behaviors in other materials at ultra-high pressure.

Solvent-controlled elongation and mechanochemical strain in a metal-organic framework

Under high pressure, crystals of [Zn(m-btcp)₂(bpdc)₂]·2DMF·H₂O, referred to as DMOF are particularly sensitive to the type of pressure-transmitting media (PTM) employed: large PTM molecules seal the pores and DMOF is compressed as a closed system, whereas small PTM molecules are pushed into the pores, thereby altering the stoichiometry of DMOF. Compression in glycerol and Daphne 7474 leads to negative linear compressibility (NLC), while a mixture of methanol : ethanol : water 'hyperfills' the pores of the chiral framework, adjusting its 3-dimensional strain and resulting in pressure-induced amorphization around 1.2 GPa. The uptake of the small-molecule PTM strongly increases the dimensions of DMOF in the direction perpendicular to that of the NLC of the crystal.

Guest-mediated phase transitions in a flexible pillared-layered metal-organic framework under high-pressure

The guest-dependent flexibility of the pillared-layered metal-organic framework (MOF), Zn2bdc2dabco·X(guest), where guest = EtOH, DMF or benzene, has been examined by high-pressure single crystal X-ray diffraction. A pressure-induced structural phase transition is found for the EtOH- and DMF-included frameworks during compression in a hydrostatic medium of the guest species, which is dependent upon the nature and quantity of the guest in the channels. The EtOH-included material undergoes a phase transition from P4/mmm to C2/m at 0.69 GPa, which is accompanied by a change in the pore shape from square to rhombus via super-filling of the pores. The DMF-included material undergoes a guest-mediated phase transition from I4/mcm to P4/mmm at 0.33 GPa via disordering of the DMF guest. In contrast, the benzene-included framework features a structure with rhombus-shaped channels at ambient pressure and shows direct compression under hydrostatic pressure. These results demonstrate the large influence of guest molecules on the high-pressure phase behavior of flexible MOFs. Guest-mediated framework flexibility is useful for engineering MOFs with bespoke pore shapes and compressibility.

Negative Linear Compressibility in [NH3NH2]Co(HCOO)3 and Its Structural Origin Revealed from First Principles

First-principles density functional theory computations are used to predict negative linear compressibility in hybrid organic-inorganic perovskite [NH₂NH₃][Co(HCOO)₃]. Negative linear compressibility is a rare exotic response of a material to pressure associated with expansion along one or two lateral directions. Detailed structural analysis revealed that [NH₂NH₃][Co(HCOO)₃]  responds to pressure through tilting of its relatively rigid units, CoO₆ polyhedra, and (HCOO)^-1 ligand chain. The (HCOO)^-1 units form a "wine-rack" geometry which is well described with the "strut-hinge" model. Within the model, the struts are formed by the rigid units, while hinges are their relatively flexible interconnects. Under pressure, the hinge angle increases which leads to the expansion along the direction subtended by the angle. Interestingly, at zero pressure the linear compressibilities in [NH₂NH₃][Co(HCOO)₃]  are all positive. As pressure increases, the lowest linear compressibility value turns negative and increases in magnitude. Comparison with the literature suggests that such a trend is likely to be common to this family of materials. Mechanical properties of [NH₂NH₃][Co(HCOO)₃]  are highly anisotropic.

Tuning extreme anisotropic thermal expansion in 1D coordination polymers through metal selection and solid solutions

The thermal expansion behaviour of a series of 1D coordination polymers has been investigated. Variation of the metal centre allows tuning of the thermal expansion behaviour from colossal positive volumetric to extreme anomalous thermal expansion. Preparation of solid solutions increased the magnitude of the anomalous thermal expansion further, producing two species displaying supercolossal anisotropic thermal expansion (ZnCoCPHTαY2 = -712 MK-1, αY3 = 1632 MK-1 and ZnCdCPHTαY2 = -711 MK-1, αY3 = 1216 MK-1).

Investigation of the Anisotropic Thermal Expansion Mechanism of AgxGaxGe1-xSe2 Crystals

Quaternary nonlinear optical single crystals Ag_xGa_xGe_1-xSe₂ (x = 0.250, 0.167) were grown by the Bridgman method in a four-zone furnace. The thermal expansion behavior of Ag_xGa_xGe_1-xSe₂ (x = 0.25, 0.167) was studied by the method of single-crystal X-ray diffraction from 150 to 295 K and powder X-ray diffraction in the range of 298-773 K. Both results show the crystals have positive linear thermal expansion coefficients in different directions and a positive volume thermal expansion coefficient, and it is observed that they satisfy the relationship of α_a > α_c > α_b and α_V ≈ α_a + α_b + α_c for the orthorhombic structure. It is found that the Ag_xGa_xGe_1-xSe₂ (x = 0.25, 0.167) unit cells varying with temperature were mainly dominated by variations in framework geometry (AgSe₄ tetrahedron), and the thermal motion of Ag atoms in the AgSe₄ tetrahedron. As it was revealed, according to the powder X-ray diffraction, it is found that the isotropic thermal atomic displacement parameter of the Ag atoms is much larger than those of the Se and Ga(Ge) atoms in the AgSe₄ tetrahedron. Furthermore, anisotropic atomic displacement parameters (ADPs) of Ag atoms are extracted from the single-crystal diffraction; the ADPs along the a axis, b axis, and c axis have a significant difference, which means the thermal vibration of Ag atoms is anisotropic. It is of great significance for improving crystal growth technology and understanding the thermal properties of this kind of crystals.

Inflation Negative Compressibility during Intrusion-Extrusion of a Non-Wetting Liquid into a Flexible Nanoporous Framework

Negative compressibility (NC) is a phenomenon when an object expands/shrinks in at least one of its dimensions upon compression/decompression. NC is very rare and is of great interest for a number of applications. In this work a gigantic (more than one order of magnitude higher compared to the reported values) NC effect was recorded during intrusion-extrusion of a non-wetting liquid into a flexible porous structure. For this purpose, in situ high-pressure neutron scattering, intrusion-extrusion experiments, and DFT calculations were applied to a system consisting of water and a highly hydrophobic Cu₂(tebpz) metal-organic framework (MOF), which upon water penetration expands in a and c directions to demonstrate NC coefficients more than order of magnitude higher compared to the highest values ever reported. The proposed approach is not limited to the materials used in this work and can be applied to achieve coefficients of negative linear compressibility of more than 10³ TPa^-1.

Can CP Be Less Than CV ?

Can C_P be less than C_V ? This is a fundamental question in physics, chemistry, chemical engineering, and mechanical engineering. This question hangs in the minds of many students, instructors, and researchers. The first instinct is to answer "Yes, for water between 0 and 4 °C" if one knows that water expands as temperature decreases in this temperature range. The same question is asked in several Physical Chemistry and Physics textbooks. Students are supposed to answer that water contracts when heated at below 4 °C in an isobaric process. Because work is done to the contracting water, less heat is required to increase the water temperature in an isobaric process than in an isochoric process. Therefore, C_P is less than C_V . However, this answer is fundamentally flawed because it assumes, implicitly and incorrectly, that the internal energy change of water depends solely on its temperature change. Neglecting the variation of the internal energy with volume (internal pressure) will invalidate the Clausius inequality and violate the second law of thermodynamics. Once the internal pressure is properly taken into account, it becomes clear that C_P cannot be less than C_V for any substance at any temperature regardless of the sign of the thermal expansion coefficient of the substance.

A flexible microporous framework with temperature-dependent gate-opening behaviours for C2 gases

Herein we report a two-fold interpenetrating pillar-layer microporous material, whose framework severely shrinks after losing guest molecules and transforms into a stable nonporous one. More importantly, the guest-free framework has rarely seen temperature-dependent gate-opening behaviours for C2 gases around room temperature.

Giant Negative Compressibility by Liquid Intrusion into Superhydrophobic Flexible Nanoporous Frameworks

Materials or systems demonstrating negative linear compressibility (NLC), whose size increases (decreases) in at least one of their dimensions upon compression (decompression) are very rare. Materials demonstrating this effect in all their dimensions, negative volumetric compressibility (NVC), are exceptional. Here, by liquid porosimetry and in situ neutron diffraction, we show that one can achieve exceptional NLC and NVC values by nonwetting liquid intrusion in flexible porous media, namely in the ZIF-8 metal-organic framework (MOF). Atomistic simulations show that the volumetric expansion is due to the presence of liquid in the windows connecting the cavities of ZIF-8. This discovery paves the way for designing novel materials with exceptional NLC and NVC at reasonable pressures suitable for a wide range of applications.

Linear negative thermal expansion in Pd(acac)2

We propose that chemical interactions in the coordination compound Pd(acac)2 can be mapped on a wine-rack network, explaining linear negative thermal expansion in a classic coordination compound based on concepts known from network materials.

Responsive Four-Coordinate Iron(II) Nodes in FePd(CN)4

Metal node design is crucial for obtaining structurally diverse coordination polymers (CPs) and metal-organic frameworks with desirable properties; however, Fe^II ions are exclusively six-coordinated. Herein, we present a cyanide-bridged three-dimensional (3D) CP, FePd(CN)₄ , bearing four-coordinate Fe^II ions, which is synthesized by thermal treatment of a two-dimensional (2D) six-coordinate Fe^II CP, Fe(H₂ O)₂ Pd(CN)₄ ⋅4 H₂ O, to remove water molecules. Atomic-resolution transmission electron microscopy and powder X-ray and neutron diffraction measurements revealed that the FePd(CN)₄ structure is composed of a two-fold interpenetrated PtS topology network, where the Fe^II center demonstrates an intermediate geometry between tetrahedral and square-planar coordination. This four-coordinate Fe^II center with the distorted geometry can act as a thermo-responsive flexible node in the PtS network.

Large Differences in Carbon Dioxide and Water Sorption Capabilities in a System of Closely Related Isoreticular Cd(II)-based Mixed-Ligand Metal-Organic Frameworks

We report the synthesis of two isoreticular, mixed-ligand metal-organic frameworks (MOFs), [Cd(μ₂-mia)(μ₂-bpe)]_n·n(DMF)_0.5·n(H₂O)_0.5 (1) and [Cd(μ₂-nia)(μ₂-bpee)]_n·nDMF (2), where mia = 5-methoxyisophthalate, nia = 5-nitroisophthalate, bpe = 1,2-bis(4-pyridyl)ethane, bpee = 1,2-bis(4-pyridyl)ethylene, and DMF = N,N'-dimethylformamide. Variable-temperature powder X-ray diffraction studies confirmed that both MOFs remain crystalline with activation at high temperatures. Variable-temperature single-crystal X-ray diffraction studies were performed on 1, 2, and a previously published, isoreticular structure, [Cd(μ₂-nia)(μ₂-bpe)_1.5]_n·nDMF_0.84 (3). These studies show that upon desolvation that monocrystallinity is retained to significantly higher temperatures for 2 and 3 when compared to 1 for which only a partially desolvated crystal structure could be obtained. Carbon dioxide sorption is negligible for 1 at 195 and 298 K, while it is higher for 2 than 3 at 298 K and reversed at 195 K. Water vapor sorption increases in the order 1, 2, and 3. On the contrary, water liquid sorption was significantly higher for 1 when compared to 2. The variable-temperature structures of the (partially) desolvated forms of 1, 2, and 3 give some insight into the reasons for the remarkably different gas, vapor, and liquid sorption properties.

Thinking about the Development of High-Pressure Experimental Chemistry

High-pressure chemistry is an interdisciplinary science which uses high-pressure experiments and theories to study the interactions, reactions, and transformations among atoms or molecules. It has been extensively studied thus far and achieved rapid development over the past decades. However, what is next for high-pressure chemistry? In this Perspective, we mainly focus on the development of high-pressure experimental chemistry from our own viewpoint. An overview of the series of topics is as follows: (I) high pressure used as an effective tool to help resolve scientific disputes regarding phenomena observed under ambient conditions; (II) high-pressure reactions of interest to synthetic chemists; (III) utilizing chemical methods to quench the high-pressure phase; (IV) using high pressure to achieve what chemists want to do but could not do; (V) potential applications of in situ properties under high pressure. This Perspective is expected to offer future research opportunities for researchers to develop high-pressure chemistry and to inspire new endeavors in this area to promote the field of compression chemistry science.

Giant Effect of Negative Compressibility in a Water-Porous Metal-CO2 System for Sensing Applications

When compressed, the size of ordinary materials reduces. The opposite effect, when a material or system increases (decreases) its volume upon compression (decompression), is called Negative Compressibility (NC). NC is extremely rare, while being attractive for a wide range of applications. Here we demonstrate, by both experiments and MD simulations, a pronounced effect of volumetric NC in a system consisting of water, porous metal and CO₂. This effect is achieved due to a new extrusion-adsorption cycle of water from-into a porous metal driven by a wetting-nonwetting transition due to the increase-decrease of CO₂ pressure. The heterogeneous nature of such a system leads to unprecedented NC of up to ∼ 90% in a narrow pressure range, meaning that almost a double volume increase (decrease) upon compression (decompression) is achieved. As long as the wetting-nonwetting transition is achieved, the proposed approach is not limited to water and a specific porous metal. An example of the application of this phenomenon is miniature sensors, particularly for threshold CO₂ pressure detection.

Crystal Structure, Infrared Spectrum and Elastic Anomalies in Tuperssuatsiaite

The full crystal structure of the phyllosilicate mineral tuperssuatsiaite, including the positions of the hydrogen atoms in its unit cell, is determined for the first time by using first-principles solid-state methods. From the optimized structure, its infrared spectrum and elastic properties are determined. The computed infrared spectrum is in excellent agreement with the experimental spectrum recorded from a natural sample from Ilímaussaq alkaline complex (Greenland, Denmark). The elastic behavior of tuperssuatsiaite is found to be extremely anomalous and significant negative compressibilities are found. Tuperssuatsiaite exhibits the important negative linear compressibility phenomenon under small anisotropic pressures applied in a wide range of orientations of the applied strain and the very infrequent negative area compressibility phenomenon under external isotropic pressures in the range from 1.9 to 2.4 GPa. The anisotropic negative linear compressibility effect in tuperssuatsiaite is related to the increase of the unit cell along the direction perpendicular to the layers charactering its crystal structure. The isotropic negative area compressibility effect, however, is related to the increase of the unit cell dimensions along the directions parallel to the layers.

Solid-State Dynamics and High-Pressure Studies of a Supramolecular Spiral Gear

The structures and solid-state dynamics of the supramolecular salts of the general formula [(12-crown-4)₂ ⋅DABCOH₂ ](X)₂ (where DABCO=1,4-diazabicyclo[2.2.2]octane, X=BF₄ , ClO₄ ) have been investigated as a function of temperature (from 100 to 360 K) and pressure (up to 3.4 GPa), through the combination of variable-temperature and variable-pressure XRD techniques and variable-temperature solid-state NMR spectroscopy. The two salts are isomorphous and crystallize in the enantiomeric space groups P3₂ 2₁ and P3₁ 2₁ . All building blocks composing the supramolecular complex display dynamic processes at ambient temperature and pressure. It has been demonstrated that the motion of the crown ethers is maintained on lowering the temperature (down to 100 K) or on increasing the pressure (up to 1.5 GPa) thanks to the correlation between neighboring molecules, which mesh and rotate in a concerted manner similar to spiral gears. Above 1.55 GPa, a collapse-type transition to a lower-symmetry ordered structure, not attainable at a temperature of 100 K, takes place, proving, thus, that the pressure acts as the means to couple and decouple the gears. The relationship between temperature and pressure effects on molecular motion in the solid state has also been discussed.

Effect of Extra-Framework Cations on Negative Linear Compressibility and High-Pressure Phase Transitions: A Study of KCd[Ag(CN)2]3

The negative thermal expansion material potassium cadmium dicyanoargentate, KCd[Ag(CN)₂]₃, is studied at high pressure using a combination of X-ray single-crystal diffraction, X-ray powder diffraction, infrared and Raman spectroscopy, and density functional theory calculations. In common with the isostructural manganese analogue, KMn[Ag(CN)₂]₃, this material is shown to exhibit very strong negative linear compressibility (NLC) in the crystallographic c direction due to structure hinging. We find increased structural flexibility results in enhanced NLC and NTE properties, but this also leads to two pressure-induced phase transitions-to very large unit cells involving octahedral tilting and shearing of the structure-below 2 GPa. The presence of potassium cations has an important effect on the mechanical and thermodynamic properties of this family, while the chemical versatility demonstrated here is of considerable interest to tune unusual mechanical properties for application.

Colossal Negative Linear Compressibility in Porous Organic Salts

Negative linear compressibility (NLC) is a common sense violation (that is, crystal phases expand in one or more directions under hydrostatic compression). The excellent NLC performance of crystal materials is intrinsically related to the geometric structure of its skeleton. Here, we discovered a crystalline porous organic salt (CPOS-1); high-pressure X-ray diffraction experiments reveal that the CPOS-1 shows colossal NLC (K_c = -90.7 T Pa^-1) behavior along the c axis. This incredible performance arises from the flexible "supramolecular spring" formed by the charge-enhanced N-H⁺···^-O-S hydrogen bond interaction between the anionic sulfonate and the cationic ammonium ion. Furthermore, we reveal the relationship between this rare NLC behavior and single crystal proton conductivity using high-pressure electrochemical impedance spectroscopy (EIS) method. We believe that NLC behavior research on such inexpensive and readily available porous organic materials is of great significance for accelerating the research and application of NLC materials, especially in organic system.

Functionalized Dynamic Metal-Organic Frameworks as Smart Switches for Sensing and Adsorption Applications

Over the past two decades, metal-organic frameworks (MOFs) with flexible structures or dynamic behavior have shown great potential as functional materials in many fields. This paper presents a review of these dynamic and functional MOFs, which can undergo controllable and reversible transformation, with regard to their application as smart switches. Trigger conditions, which include physical/chemical stimuli (e.g., guest molecules, light, temperature, pressure), are also discussed. Research methods for investigating the dynamic processes and mechanisms involving experimental characterization and computational modeling are briefly mentioned as well. The emphasis is on the aspects of the design and functionalization of dynamic MOFs. The pre-design of metal nodes, organic linkers, and topology, as well as post-modification of components, increases the possibility of obtaining functionalized dynamic materials. Recent advances with regard to potential applications for dynamic frameworks as smart switches for adsorption and sensing are also reviewed.

Lab in a DAC - high-pressure crystal chemistry in a diamond-anvil cell

The diamond-anvil cell (DAC) was invented 60 years ago, ushering in a new era for material sciences, extending research into the dimension of pressure. Most structural determinations and chemical research have been conducted at ambient pressure, i.e. the atmospheric pressure on Earth. However, modern experimental techniques are capable of generating pressure and temperature higher than those at the centre of Earth. Such extreme conditions can be used for obtaining unprecedented chemical compounds, but, most importantly, all fundamental phenomena can be viewed and understood from a broader perspective. This knowledge, in turn, is necessary for designing new generations of materials and applications, for example in the pharmaceutical industry or for obtaining super-hard materials. The high-pressure chambers in the DAC are already used for a considerable variety of experiments, such as chemical reactions, crystallizations, measurements of electric, dielectric and magnetic properties, transformations of biological materials as well as experiments on living tissue. Undoubtedly, more applications involving elevated pressure will follow. High-pressure methods become increasingly attractive, because they can reduce the sample volume and compress the intermolecular contacts to values unattainable by other methods, many times stronger than at low temperature. The compressed materials reveal new information about intermolecular interactions and new phases of single- and multi-component compounds can be obtained. At the same time, high-pressure techniques, and particularly those of X-ray diffraction using the DAC, have been considerably improved and many innovative developments implemented. Increasingly more equipment of in-house laboratories, as well as the instrumentation of beamlines at synchrotrons and thermal neutron sources are dedicated to high-pressure research.

Giant anisotropic thermal expansion actuated by thermodynamically assisted reorientation of imidazoliums in a single crystal

Materials demonstrating unusual large positive and negative thermal expansion are fascinating for their potential applications as high-precision microscale actuators and thermal expansion compensators for normal solids. However, manipulating molecular motion to execute huge thermal expansion of materials remains a formidable challenge. Here, we report a single-crystal Cu(II) complex exhibiting giant thermal expansion actuated by collective reorientation of imidazoliums. The circular molecular cations, which are rotationally disordered at a high temperature and statically ordered at a low temperature, demonstrate significant reorientation in the molecular planes. Such atypical molecular motion, revealed by variable-temperature single crystal X-ray diffraction and solid-state NMR analyses, drives an exceptionally large positive thermal expansion and a negative thermal expansion in a perpendicular direction of the crystal. The consequent large shape change (~10%) of bulk material, with remarkable durability, suggests that this complex is a strong candidate as a microscale thermal actuating material.

Designing materials with large thermal expansion is highly desirable to fabricate microscale devices. The authors report unusually large anisotropic negative and positive thermal expansion in a simple crystalline material, through temperature-driven orientation of imidazole cations acting as molecular wheels.

Metal-Organic Frameworks in Modern Physics: Highlights and Perspectives

Owing to the synergistic combination of a hybrid organic-inorganic nature and a chemically active porous structure, metal-organic frameworks have emerged as a new class of crystalline materials. The current trend in the chemical industry is to utilize such crystals as flexible hosting elements for applications as diverse as gas and energy storage, filtration, catalysis, and sensing. From the physical point of view, metal-organic frameworks are considered molecular crystals with hierarchical structures providing the structure-related physical properties crucial for future applications of energy transfer, data processing and storage, high-energy physics, and light manipulation. Here, the perspectives of metal-organic frameworks as a new family of functional materials in modern physics are discussed: from porous metals and superconductors, topological insulators, and classical and quantum memory elements, to optical superstructures, materials for particle physics, and even molecular scale mechanical metamaterials. Based on complementary properties of crystallinity, softness, organic-inorganic nature, and complex hierarchy, a description of how such artificial materials have extended their impact on applied physics to become the mainstream in material science is offered.

Metal-organic framework based on hinged cube tessellation as transformable mechanical metamaterial

Mechanical metamaterials exhibit unusual properties, such as negative Poisson's ratio, which are difficult to achieve in conventional materials. Rational design of mechanical metamaterials at the microscale is becoming popular partly because of the advance in three-dimensional printing technologies. However, incorporating movable building blocks inside solids, thereby enabling us to manipulate mechanical movement at the molecular scale, has been a difficult task. Here, we report a metal-organic framework, self-assembled from a porphyrin linker and a new type of Zn-based secondary building unit, serving as a joint in a hinged cube tessellation. Detailed structural analysis and theoretical calculation show that this material is a mechanical metamaterial exhibiting auxetic behavior. This work demonstrates that the topology of the framework and flexible hinges inside the structure are intimately related to the mechanical properties of the material, providing a guideline for the rational design of mechanically responsive metal-organic frameworks.