Evidence for an oxygen evolving iron-oxo-cerium intermediate in iron-catalysed water oxidation

Chemical design of metal complexes for electrochemical water oxidation under acidic conditions

The development of viable, stable, and highly efficient molecular water oxidation catalysts under acidic aqueous conditions (pH < 7) is challenging with Earth-abundant metals in the field of renewable energy due to their low stability and catalytic activity. The utilization of these catalysts is generally considered more cost-effective and sustainable relative to conventional catalysts relying on precious metals such as ruthenium and iridium, which exhibit outstanding activities. Herein, we discussed the effectiveness of transition metal complexes for electrocatalytic water oxidation under acidic conditions. We focus on important aspects of 3d first-row metal complexes as they relate to the design of water oxidation systems and emphasize the importance of the fundamental coordination chemistry perspective in this field, which can be applied to the understanding of catalytic activity and fundamental structure-function relationships. Finally, we identified the scientific challenges that should be overcome for the future development and application of water oxidation electrochemical catalysts.

Formation and Reactivity of a MnIV(O)(μ-O)CeIV Species: A Closest Mimic of Photosystem II

Understanding the basic structure of the oxygen-evolving complex (OEC) in photosystem II (PS-II) and the water oxidation mechanism can aid in the discovery of more efficient and sustainable catalysts for water oxidation. In this context, we present evidence of the formation of a [(TPA)MnIV(O)(μ-O)CeIV(NO3)3]+ (2) complex (TPA = tris(pyridyl-2-methyl)amine) by adding aqueous ceric ammonium nitrate to an acetonitrile solution of the [(TPA)MnII]2+ (1) complex. This unique intermediate (2) was analyzed by using various spectroscopic techniques and electrospray ionization mass spectrometry. Remarkably, 2 closely mimics the structure of MnV(O)(μ-O)CaII(OH2) proposed in the OEC of PS-II. Notably, 2 reacts effectively with ferrocene derivatives, indicating that redox-active CeIV binding enhances the electron transfer efficiency. Additionally, 2 demonstrated the ability to perform oxygen atom transfer and hydrogen atom abstraction reactions. The discovery of this reactive [(TPA)MnIV(O)(μ-O)CeIV(NO3)3]+ species provides exciting opportunities for investigating the structure of the MnV(O)(μ-O)CaII(OH2) unit in the OEC.

Ceric Ammonium Nitrate Oxidation of a MnII Complex Generates a Bis(μ-oxo)dimanganese(IV,IV) Product via a MnIV-Oxo Intermediate

The oxidation of manganese complexes using ceric ammonium nitrate (CAN) is often complicated by the fact that cerium(IV) can serve as both an oxidant and a Lewis acid. In this work, we explore the reaction of CAN with the MnII complex [MnII(OTf)(DMMN4py)](OTf) (DMMN4py = N,N-bis(4-methoxy-3,5-dimethyl-2-pyridylmethyl)-N-bis(2-pyridyl)methylamine). We chose this complex as multiple oxidation products, including oxomanganese(IV) and bis(μ-oxo)dimanganese(III,IV) complexes, have previously been reported. We envisioned that knowledge of the spectral properties of these intermediates would aid in understanding the potential complexities of CAN oxidation reactions. The oxidation of [MnII(OTf)(DMMN4py)](OTf) with 2.0 equiv CAN in 9:1 (v/v) MeCN:H2O at 25 °C transiently forms the MnIV-oxo complex, but this species is formed in low yields and is unstable. The MnIV-oxo complex evolves to a new intermediate that had not been previously observed. At lower temperatures, the formation of this new intermediate is preceded by formation of the previously reported bis(μ-oxo)dimanganese(III,IV) complex. EPR and X-ray absorption experiments for the new intermediate provide strong evidence for its formulation as [MnIVMnIV(μ-O)2(DMMN4py)2]4+. This work establishes dinuclear MnIVMnIV species as products that must be considered in CAN oxidation reactions of MnII complexes and shows that both mononuclear MnIV-oxo and dinuclear MnIIIMnIV complexes can be intermediates in such reactions.

Pivotal Role of Geometry Regulation on O-O Bond Formation Mechanism of Bimetallic Water Oxidation Catalysts

In this study, we highlight the impact of catalyst geometry on the formation of O-O bonds in Cu2 and Fe2 catalysts. A series of Cu2 complexes with diverse linkers are designed as electrocatalysts for water oxidation. Interestingly, the catalytic performance of these Cu2 complexes is enhanced as their molecular skeletons become more rigid, which contrasts with the behavior observed in our previous investigation with Fe2 analogs. Moreover, mechanistic studies reveal that the reactivity of the bridging O atom results in distinct pathways for O-O bond formation in Cu2 and Fe2 catalysts. In Cu2 systems, the coupling takes place between a terminal CuIII -OH and a bridging μ-O⋅ radical. Whereas in Fe2 systems, it involves the coupling of two terminal Fe-oxo entities. Furthermore, an in-depth structure-activity analysis uncovers the spatial geometric prerequisites for the coupling of the terminal OH with the bridging μ-O⋅ radical, ultimately leading to the O-O bond formation. Overall, this study emphasizes the critical role of precisely adjusting the spatial geometry of catalysts to align with the O-O bonding pathway.

Rebound or Cage Escape? The Role of the Rebound Barrier for the Reactivity of Non-Heme High-Valent FeIV =O Species

Owing to their high reactivity and selectivity, variations in the spin ground state and a range of possible pathways, high-valent FeIV =O species are popular models with potential bioinspired applications. An interesting example of a structure-reactivity pattern is the detailed study with five nonheme amine-pyridine pentadentate ligand FeIV =O species, including N4py: [(L1 )FeIV =O]2+ (1), bntpen: [(L2 )FeIV =O]2+ (2), py2 tacn: [(L3 )FeIV =O]2+ (3), and two isomeric bispidine derivatives: [(L4 )FeIV =O]2+ (4) and [(L5 )FeIV =O]2+ (5). In this set, the order of increasing reactivity in the hydroxylation of cyclohexane differs from that with cyclohexadiene as substrate. A comprehensive DFT, ab initio CASSCF/NEVPT2 and DLPNO-CCSD(T) study is presented to untangle the observed patterns. These are well reproduced when both activation barriers for the C-H abstraction and the OH rebound are taken into account. An MO, NBO and deformation energy analysis reveals the importance of π(pyr) → π*xz (FeIII -OH) electron donation for weakening the FeIII -OH bond and thus reducing the rebound barrier. This requires that pyridine rings are oriented perpendicularly to the FeIII -OH bond and this is a subtle but crucial point in ligand design for non-heme iron alkane hydroxylation.

Formation of a Reactive [Mn(III)-O-Ce(IV)] Species and its Facile Equilibrium with Related Mn(IV)(OX) (X = Sc or H) Complexes

Lewis acid-bound high valent Mn-oxo species are of great importance due to their relevance to photosystem II. Here, we report the synthesis of a unique [(BnTPEN)Mn(III)-O-Ce(IV)(NO3 )4 ]+ adduct (2) by the reaction of (BnTPEN)Mn(II) (1) with 4 eq. ceric ammonium nitrate. 2 has been characterized using UV/Vis, NMR, resonance Raman spectroscopy, as well as by mass spectrometry. Treatment of 2 with Sc(III)(OTf)3 results in the formation of (BnTPEN)Mn(IV)-O-Sc(III) (3), while HClO4 addition to 2 forms (BnTPEN)Mn(IV)-OH (4), reverting to 2 upon Ce(III)(NO3 )3 addition. 2 can also be prepared by the oxidation of 1 eq. Ce(III)(NO3 )3 with [(BnTPEN)Mn(IV)=O]2+ (5). In addition, the EPR spectroscopy revealed the elegant temperature-dependent equilibria between 2 and Mn(IV) species. The binding of redox-active Ce(IV) boosts electron transfer efficiency of 2 towards ferrocenes. Remarkably, the newly characterized Mn(III)-O-Ce(IV) species can carry out O-atom and H-atom transfer reactions.

Ionic γ-FeO(OH) Nanocrystal Stabilized by Small Isopolymolybdate Clusters as Reactive Core for Water Oxidation

At near neutral to basic pH, hydrolysis-induced aggregation to insoluble bulk iron-oxide is often regarded as the pitfalls of molecular iron clusters. Iron-oxide nanocrystals are encouragingly active over the molecular clusters and/or bulk oxides albeit, stabilizing such nanostructures in aqueous pH and under turnover condition remain a perdurable challenge. Herein, an Anderson-type [Mo₇ O₂₄ ]^6- isopolyanion, a small (dimension ca. 0.85 nm) isolable polyoxometalate (POM) possessing only {31} atoms, has been introduced for the first time as a covalent linker to stabilize an infinitely stable and aqueous-soluble γ-FeO(OH) nanocore. During the hydrothermal isolation of the material, a partial dissociation of the parent [Mo₇ O₂₄ ]^6- may lead to the in situ generation of few analogous [Mo_x O_y ]^n- clusters, proved by Raman study, which can also participate in stabilizing the γ-FeO(OH) nanocore, Mo_x O_y @FeO(OH). However, due to high ionic charge on {Mo=O} terminals of the [Mo_x O_y ]^n- , they are covalently linked via Mo^VI -μ₂ O-Fe^III bridging to γ-FeO(OH) core in Mo_x O_y @FeO(OH), established by numerous spectroscopic and microscopic evidence. Such bonding mode is more likely as precedent from the coordination motif documented in the transition metal clusters stabilized by this POM. The γ-FeO(OH) nanocore of Mo_x O_y @FeO(OH) behaves as potent active center for electrochemical water oxidation with a overpotential, 263 mV @ 10 mA cm^-2 , lower than that observed for bare γ-FeO(OH). Despite of some molybdenum dissolution from the POM ligands to the electrolyte, residual anionic POM fragments covalently bound to the OER active γ-FeO(OH) core of the Mo_x O_y @FeO(OH) makes the surface predominantly ionic that results in an ordered electrical double layer to promote a better charge transport across the electrode-electrolyte junction, less likely in bulk γ-FeO(OH).

Oxoiron(IV)-dominated Heterogeneous Fenton-like Mechanism of Fe-Doped MoS2

Oxoiron(IV) species are a critical intermediate in the Fe-based Fenton-like process at circumneutral pH, and its oxidative reactivity is closely related to the ligands. An optional inorganic host material, MoS₂ , is selected to construct a highly reactive sulfur ligand coordinated Fe species in this work. The Fe species doped in MoS₂ is presented as the Fe^II centre and triggers the transformation of the 2H phase to the octahedral 1T phase MoS₂ . The role of the interaction between doped Fe and the MoS₂ host lattice on the formation of oxoiron(IV) is studied. A significant Fenton-like reactivity and a remarkable accumulation of oxoiron(IV) species were observed for Fe-MoS₂ . The quenching experiment was implemented to disclose the predominant role of oxoiron(IV) species in the Fe-MoS₂ /H₂ O₂ Fenton-like system. Furthermore, oxoiron(IV) species could transform into the ⋅O₂ ^- and ¹ O₂ , which further expedites the Fenton-like reaction.

On the origin of multihole oxygen evolution in haematite photoanodes

The oxygen evolution reaction (OER) plays a crucial role in (photo)electrochemical devices that use renewable energy to produce synthetic fuels. Recent measurements on semiconducting oxides have found a power law dependence of the OER rate on surface hole density, suggesting a multihole mechanism. In this study, using transient photocurrent measurements, density functional theory simulations and microkinetic modelling, we have uncovered the origin of this behaviour in haematite. We show here that the OER rate has a third-order dependence on the surface hole density. We propose a mechanism wherein the reaction proceeds by accumulating oxidizing equivalents through a sequence of one-electron oxidations of surface hydroxy groups. The key O–O bond formation step occurs by the dissociative chemisorption of a hydroxide ion involving three oxyl sites. At variance with the case of metallic oxides, the activation energy of this step is weakly dependent on the surface hole coverage, leading to the observed power law.

Effect of Redox-Inactive Metal Ion-Nickel(III) Interactions on the Redox Properties and Proton-Coupled Electron Transfer Reactivity

Mononuclear nickel(II) and nickel(III) complexes of a bisamidate-bisalkoxide ligand, (NMe₄)₂[Ni^II(HMPAB)] (1) and (NMe₄)[Ni^III(HMPAB)] (2), respectively, have been synthesized and characterized by various spectroscopic techniques including X-ray crystallography. The reaction of redox-inactive metal ions (Mⁿ⁺ = Ca²⁺, Mg²⁺, Zn²⁺, Y³⁺, and Sc³⁺) with 2 resulted in 2-Mⁿ⁺ adducts, which was assessed by an array of spectroscopic techniques including X-ray absorption spectroscopy (XAS), electron paramagnetic resonance (EPR), and reactivity studies. The X-ray structure of Ca²⁺ coordinated to Ni(III) complexes, 2-Ca²⁺T, was determined and exhibited an average Ni-Ca distance of 3.1253 Å, close to the metal ions' covalent radius. XAS analysis of 2-Ca²⁺ and 2-Y³⁺ in solution further revealed an additional coordination to Ca and Y in the 2-Mⁿ⁺ adducts with shortened Ni-M distances of 2.15 and 2.11 Å, respectively, implying direct bonding interactions between Ni and Lewis acids (LAs). Such a short interatomic distance between Ni(III) and M is unprecedented and was not observed before. EPR analysis of 2 and 2-Mⁿ⁺ species, moreover, displayed rhombic signals with g_av > 2.12 for all complexes, supporting the +III oxidation state of Ni. The Ni^III/Ni^II redox potential of 2 and 2-Mⁿ⁺ species was determined, and a plot of E_1/2 of 2-Mⁿ⁺ versus pK_a of [M(H₂O)_n]^m+ exhibited a linear relationship, implying that the Ni^III/Ni^II potential of 2 can be tuned with different redox-inactive metal ions. Reactivity studies of 2 and 2-Mⁿ⁺ with different 4-X-2,6-ditert-butylphenol (4-X-DTBP) and other phenol derivatives were performed, and based on kinetic studies, we propose the involvement of a proton-coupled electron transfer (PCET) pathway. Analysis of the reaction products after the reaction of 2 with 4-OMe-DTBP showed the formation of a Ni(II) complex (1a) where one of the alkoxide arms of the ligand is protonated. A pK_a value of 24.2 was estimated for 1a. The reaction of 2-Mⁿ⁺ species was examined with 4-OMe-DTBP, and it was observed that the k₂ values of 2-Mⁿ⁺ species increase by increasing the Lewis acidity of redox-inactive metal ions. However, the obtained k₂ values for 2-Mⁿ⁺ species are much lower compared to the k₂ value for 2. Such a variation of PCET reactivity between 2 and 2-Mⁿ⁺ species may be attributed to the interactions between Ni(III) and LAs. Our findings show the significance of the secondary coordination sphere effect on the PCET reactivity of Ni(III) complexes and furnish important insights into the reaction mechanism involving high-valent nickel species, which are frequently invoked as key intermediates in Ni-mediated enzymatic reactions, solar-fuel catalysis, and biomimetic/synthetic transformation reactions.

Non-heme oxoiron complexes as active intermediates in the water oxidation process with hydrogen/oxygen atom transfer reactions

In this study, we explore the water oxidation process with the help of density functional theory. The formation of an oxygen-oxygen bond is crucial in the water oxidation process. Here, we report the formation of the oxygen-oxygen bond by the N5-coordinate oxoiron species with a higher oxidation state of Fe^IV and Fe^V. This bond formation is studied through the nucleophilic addition of water molecules and the transfer of the oxygen atom from meta-chloroperbenzoic acid (mCPBA). Our study reveals that the oxygen-oxygen bond formation by reacting mCPBA with Fe^VO requires less activation barrier (13.7 kcal mol^-1) than the other three pathways. This bond formation by the oxygen atom transfer (OAT) pathway is more favorable than that achieved by the hydrogen atom transfer (HAT) pathway. In both cases, the oxygen-oxygen bond formation occurs by interacting the σ*d_z²-2p_z molecular orbital of the iron-oxo intermediate with the 2p_x orbital of the oxygen atom. From this study, we understand that the oxygen-oxygen bond formation by Fe^IVO with the OAT process is also feasible (16 kcal mol^-1), suggesting that Fe^VO may not always be required for the water oxidation process by non-heme N5-oxoiron. After the oxygen-oxygen bond formation, the release of the dioxygen molecule occurs with the addition of the water molecule. The release of dioxygen requires a barrier of 7.0 kcal mol^-1. The oxygen-oxygen bond formation is found to be the rate-determining step.

High quantum yield photochemical water oxidation using a water-soluble cobalt phthalocyanine as a homogenous catalyst

We demonstrated high catalytic activity (TON = 670, TOF_max = 2.7 s^-1) of a water-soluble cobalt phthalocyanine complex (CoPcTS, PcTS = phthalocyaninetetrasulfonate) for visible light-driven photochemical water oxidation and investigated its reaction mechanism by electrochemical and spectroscopic measurements.

New bimetallic adsorbent material based on cerium-iron nanoparticles highly selective and affine for arsenic(V)

Bimetallic oxy(hydroxides) have gain great interest in water treatment systems based on adsorption processes. Their high OH groups density, in addition to inheriting the oxides properties make them highly promising adsorbents of anions. In this work, highly affine and selective bimetallic oxyhydroxides of cerium and iron (Ce:Fe-P's) for arsenic(V) were synthesized by implementing an assisted microwave methodology. The Ce:Fe-P's were characterized by various techniques (SEM, FTIR, XRD and XPS) and the As(V) adsorption capacity and kinetics as well as the effect of pH and the presence of coexisting anions were determined. The results showed that Ce:Fe-P's have an outstanding As(V) adsorption capacity (179.8 mg g^-1 at C_e = 3 mg L^-1) even at low concentrations (120 mg g^-1 at C_e = 37 μg L^-1). Moreover, the adsorption equilibrium was reached very fast, just in 3 min, with an adsorption rate of 0.123 mg min^-1, that is, 80% of the initial As(V) concentration of 5 mg L^-1 was removed in the first 3 min. The arsenic adsorption capacity decreased only up to 20% at pH above 7, attributed to electrostatic repulsions due to the adsorbent's pH_PZC, which was 6.8. On the other hand, the arsenic adsorption capacity of Ce:Fe-P's decreased just 21% in the presence of 10 mg L^-1 of each of the following competing anions: F^-, Cl^-, SO₄^2-, NO₃^-, PO₄^3- and CO₃^2-, which usually coincide in contaminated water with As(V). Ce:Fe-P's has proven to be one of the most promising As(V) adsorbent materials reported so far in the literature, because it presented an outstanding adsorption capacity and at the same time a very fast adsorption speed. Furthermore, the pH and the concentration of coexisting anions caused little interference in the adsorption processes. Due to the above, the Ce:Fe-P's is already in the process of intellectual protection.

Acid Catalysis in the Oxidation of Substrates by Mononuclear Manganese(III)-Aqua Complexes

Acids are known to enhance the reactivities of metal-oxygen intermediates, such as metal-oxo, -hydroperoxo, -peroxo, and -superoxo complexes, in biomimetic oxidation reactions. Although metal-aqua (and metal-hydroxo) complexes have been shown to be potent oxidants in oxidation reactions, acid effects on the reactivities of metal-aqua complexes have never been investigated previously. In this study, a mononuclear manganese(III)-aqua complex, [(dpaq^5NO2)Mn^III(OH₂)]²⁺ (1; dpaq^5NO2 = 2-[bis(pyridin-2-ylmethyl)]amino-N-quinolin-8-ylacetamidate with an NO₂ substituent at the 5 position), which is relatively stable in the presence of triflic acid (HOTf), is used in the investigation of acid-catalyzed oxidation reactions by metal-aqua complexes. As a result, we report a remarkable acid catalysis in the six-electron oxidation of anthracene by 1 in the presence of HOTf; anthraquinone is formed as the product. In the HOTf-catalyzed six-electron oxidation of anthracene by 1, the rate constant increases linearly with an increase of the HOTf concentration. Combined with the observed one-electron oxidation product, anthracene (derivative) radical cation, and the substitution effect at the 5 position of the dpaq ligand in 1 on the rate constants of the oxidation of anthracene, it is concluded that the oxidation of anthracene occurs via an acid-promoted electron transfer (APET) from anthracene to 1. The dependence of the rate constants of the APET from electron donors, including anthracene derivatives, to 1 on the driving force of electron transfer is also shown to be well fitted by the Marcus equation of outer-sphere electron transfer. To the best of our knowledge, this is the first example showing acid catalysis in the oxidation of substrates by metal(III)-aqua complexes.

Homogeneous or heterogeneous electrocatalysis: reinvestigation of a cobalt coordination compound for water oxidation

A cobalt coordination compound with azo-ligand linkers combined with linked bisulfonate moieties has been argued to be an efficient catalyst for the oxygen-evolution reaction (OER) (H.-T. Shi, X.-X. Li, F.-H. Wu and W.-B. Yu, Dalton Trans., 2017, 46, 16321.). In the previously published report, this cobalt compound (compound 1) was believed to display a high turnover frequency (5 s^-1) at η = 720 mV at pH 9. Herein, the OER in the presence of compound 1 is reinvestigated. The nanosized oxide-based particles formed after the OER in the presence of compound 1 were tracked by electrochemical methods, scanning electron microscopy (SEM), energy dispersive spectrometry (EDX), X-ray diffraction studies (XRD), (High-resolution) transmission electron microscopy ((HR)TEM), Raman spectroscopy, X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS). Based on these experiments, it is proposed that a candidate for the true catalyst of the OER in the presence of compound 1 is cobalt oxide. During the OER and using chronoamperometry, the oxidation state of Co ions for the formed Co oxide is (III), but after consecutive CVs the oxidation states of Co ions for the formed Co oxide are (II) and (III). The results shed new light on the role of Co oxide nanoparticles formed in the presence of this Co coordination compound during the OER. Our experimental data also show that for the OER in the presence of a homogeneous (pre)catalyst, careful analyses to find the role of metal oxides are necessary for informed progress. The present findings also might help to find the mechanism of the OER in the presence of coordination compounds.

Electrochemical Properties and Reactivity Study of [MnV(O)(μ-OR-Lewis Acid)] Cores

A mononuclear manganese(V) oxo complex of a bis(amidate)bis(alkoxide) ligand, (NMe₄)[Mn^V(HMPAB)(O)] [2; H₄HMPAB = 1,2-bis(2-hydroxy-2-methylpropanamido)benzene], was synthesized and structurally characterized. A Mn-O_term distance of 1.566(4) Å was observed in the solid-state structure of 2, consistent with the Mn≡O formulation. The reaction of redox-inactive metal ions (Mⁿ⁺ = Li⁺, Ca²⁺, Mg²⁺, Y³⁺, and Sc³⁺) with 2 resulted in the formation of 2-Mⁿ⁺ species, which were characterized by UV-vis, ¹H NMR, cyclic voltammetry, and in situ IR spectroscopy. Theoretical calculations suggested that the alkoxide oxygen atoms of the ligand scaffold are energetically most favorable for coordinating the Mⁿ⁺ ions in 2. Complex 2 revealed one-electron-reduction potential at -0.01 V versus ferrocenium/ferrocene, which shifted anodically upon coordination of Mⁿ⁺ ions to 2, and such a shift became more prominent with stronger Lewis acids. The oxygen-atom transfer (OAT) reactivities of 2 and 2-Mⁿ⁺ species with triphenylphosphine were compared, which exhibited a systematic increase of the reaction rate with increasing Lewis acidity of Mⁿ⁺ ions, and a plot of log k₂ versus Lewis acidity of Mⁿ⁺ ions (ΔE) followed a linear relationship. It was observed that 2-Sc³⁺ was ca. 3200 times more reactive toward the OAT reaction compared to 2. Hammett analysis of 2 exhibited a V-shaped plot, indicating a change of the reaction mechanism upon going from electron-rich to electron-deficient Ar₃P substrates. In contrast, 2-Ca²⁺ and 2-Sc³⁺ showed an electrophilic nature toward the OAT reaction, thus demonstrating the role of the Lewis acid in controlling the OAT mechanism. The hydrogen-atom abstraction reaction of 2 and 2-Mⁿ⁺ adducts with 1-benzyl-1,4-dihydronicotinamide was investigated, and it was observed that the rate of reaction did not vary considerably with the Lewis acidity of Mⁿ⁺ ions. On the basis of Eyring analysis of 2 and 2-Mⁿ⁺ adducts, we hypothesized an entropy-controlled hydrogen-atom-transfer reaction for 2-Sc³⁺, which is different from the reaction mechanism of 2 and 2-Ca²⁺.

Deeper Understanding of Mononuclear Manganese(IV)-Oxo Binding Brønsted and Lewis Acids and the Manganese(IV)-Hydroxide Complex

Binding of Lewis acidic metal ions and Brønsted acid at the metal-oxo group of high-valent metal-oxo complexes enhances their reactivities significantly in oxidation reactions. However, such a binding of Lewis acids and proton at the metal-oxo group has been questioned in several cases and remains to be clarified. Herein, we report the synthesis, characterization, and reactivity studies of a mononuclear manganese(IV)-oxo complex binding triflic acid, {[(dpaq)Mn^IV(O)]-HOTf}⁺ (1-HOTf). First, 1-HOTf was synthesized and characterized using various spectroscopic techniques, including resonance Raman (rRaman) and X-ray absorption spectroscopy/extended X-ray absorption fine structure. In particular, in rRaman experiments, we observed a linear correlation between the Mn-O stretching frequencies of 1-HOTf (e.g., ν_Mn-O at ∼793 cm^-1) and 1-Mⁿ⁺ (Mⁿ⁺ = Ca²⁺, Zn²⁺, Lu³⁺, Al³⁺, or Sc³⁺) and the Lewis acidities of H⁺ and Mⁿ⁺ ions, suggesting that H⁺ and Mⁿ⁺ bind at the metal-oxo moiety of [(dpaq)Mn^IV(O)]⁺. Interestingly, a single-crystal structure of 1-HOTf was obtained by X-ray diffraction analysis, but the structure was not an expected Mn(IV)-oxo complex but a Mn(IV)-hydroxide complex, [(dpaq)Mn^IV(OH)](OTf)₂ (4), with a Mn-O bond distance of 1.8043(19) Å and a Mn-O stretch at 660 cm^-1. More interestingly, 4 reverted to 1-HOTf upon dissolution, demonstrating that 1-HOTf and 4 are interconvertible depending on the physical states, such as 1-HOTf in solution and 4 in isolated solid. The reactivity of 1-HOTf was investigated in hydrogen atom transfer (HAT) and oxygen atom transfer (OAT) reactions and then compared with those of 1-Mⁿ⁺ complexes; an interesting correlation between the Mn-O stretching frequencies of 1-HOTf and 1-Mⁿ⁺ and their reactivities in the OAT and HAT reactions is reported for the first time in this study.

Bio-Inspired Molecular Catalysts for Water Oxidation

The catalytic tetranuclear manganese-calcium-oxo cluster in the photosynthetic reaction center, photosystem II, provides an excellent blueprint for light-driven water oxidation in nature. The water oxidation reaction has attracted intense interest due to its potential as a renewable, clean, and environmentally benign source of energy production. Inspired by the oxygen-evolving complex of photosystem II, a large of number of highly innovative synthetic bio-inspired molecular catalysts are being developed that incorporate relatively cheap and abundant metals such as Mn, Fe, Co, Ni, and Cu, as well as Ru and Ir, in their design. In this review, we briefly discuss the historic milestones that have been achieved in the development of transition metal catalysts and focus on a detailed description of recent progress in the field.

Ligand Radical Mediated Water Oxidation by a Family of Copper o-Phenylene Bis-oxamidate Complexes

Understanding the reactivity landscape for the activation of water until the formation of the O-O bond and O₂ release in molecular chemistry is a decisive step in guiding the elaboration of cost-effective catalysts for the oxygen-evolving reaction (OER). Copper(II) complexes have recently caught the attention of chemists as catalysts for the 4e^-/4H⁺ water oxidation process. While a copper(IV) intermediate has been proposed as the reactive intermediate species, no spectroscopic signature has been reported so far. Copper(III) ligand radical species have also been formulated and supported by theoretical studies. We found, herein, that the reactivity sequence for the water oxidation with a family of Copper(II) o-phenylene bis-oxamidate complexes is a function of the substitution pattern on the periphery of the aromatic ring. In-situ EPR, FTIR, and rR spectroelectrochemical studies helped to sequence the elementary electrochemical and chemical events leading toward the O₂ formation selectively at the copper center. EPR and FTIR spectroelectrochemistry suggests that ligand-centered oxidations are preferred over metal-centered oxidations. rR spectroelectrochemical study revealed the accumulation of a bis-imine bound copper(II) superoxide species, as the reactive intermediate, under catalytic turnover, which provides the evidence for the O-O bond formation during OER.

Iron-Catalyzed Water Oxidation: O-O Bond Formation via Intramolecular Oxo-Oxo Interaction

Herein, we report the importance of structure regulation on the O-O bond formation process in binuclear iron catalysts. Three complexes, [Fe₂ (μ-O)(OH₂ )₂ (TPA)₂ ]⁴⁺ (1), [Fe₂ (μ-O)(OH₂ )₂ (6-HPA)]⁴⁺ (2) and [Fe₂ (μ-O)(OH₂ )₂ (BPMAN)]⁴⁺ (3), have been designed as electrocatalysts for water oxidation in 0.1 M NaHCO₃ solution (pH 8.4). We found that 1 and 2 are molecular catalysts and that O-O bond formation proceeds via oxo-oxo coupling rather than by the water nucleophilic attack (WNA) pathway. In contrast, complex 3 displays negligible catalytic activity. DFT calculations suggested that the anti to syn isomerization of the two high-valent Fe=O moieties in these catalysts takes place via the axial rotation of one Fe=O unit around the Fe-O-Fe center. This is followed by the O-O bond formation via an oxo-oxo coupling pathway at the Fe^IV Fe^IV state or via oxo-oxyl coupling pathway at the Fe^IV Fe^V state. Importantly, the rigid BPMAN ligand in complex 3 limits the anti to syn isomerization and axial rotation of the Fe=O moiety, which accounts for the negligible catalytic activity.

Unveiling the High Catalytic Activity of a Dinuclear Iron Complex for the Oxygen Evolution Reaction

The dinuclear iron complex [(H₂O)-Fe^III-(ppq)-O-(ppq)-Fe^III-Cl]³⁺ (Fe^III(ppq), ppq = 2-(pyrid-2'-yl)-8-(1″,10″-phenanthrolin-2″-yl)-quinoline) demonstrates a catalytic activity about one order of magnitude higher than the mononuclear iron complex [Cl-Fe^III(dpa)-Cl]⁺ (Fe^III(dpa), dpa = N,N-di(1,10-phenanthrolin-2-yl)-N-isopentylamine) for the oxygen evolution reaction (OER). However, the mechanism behind such an unusually high activity has remained largely unclear. To solve this puzzle, a decomposition-and-reaction mechanism is proposed for the OER with the dinuclear Fe^III(ppq) complex as the initial state of the catalytic agent. In this mechanism, the high-valent dinuclear iron complex first dissociates into two mononuclear moieties, and the oxidized mononuclear iron complexes directly catalyze the formation of an O-O bond through a nitrate attack pathway with nitrate functioning as a cocatalyst. Density functional theory calculations reveal that it is the electron-deficient microenvironment around the iron center that gives rise to the remarkable catalytic activity observed experimentally. Therefore, the outstanding performance of the Fe^III(ppq) catalyst can be ascribed to the high reactivity of its mononuclear moieties in a high oxidation state, which is concomitant with the structural stability of the low-valent dinuclear complex. The theoretical insights provided by this study could be useful for the optimization and design of novel iron-based water oxidation catalysts.

Tuning the H-Atom Transfer Reactivity of Iron(IV)-Oxo Complexes as Probed by Infrared Photodissociation Spectroscopy

Reactivities of non-heme iron(IV)-oxo complexes are mostly controlled by the ligands. Complexes with tetradentate ligands such as [(TPA)FeO]2+ (TPA=tris(2-pyridylmethyl)amine) belong to the most reactive ones. Here, we show a fine-tuning of the reactivity of [(TPA)FeO]2+ by an additional ligand X (X=CH3 CN, CF3 SO3- , ArI, and ArIO; ArI=2-(t BuSO2 )C6 H4 I) attached in solution and reveal a thus far unknown role of the ArIO oxidant. The HAT reactivity of [(TPA)FeO(X)]+/2+ decreases in the order of X: ArIO > MeCN > ArI ≈ TfO- . Hence, ArIO is not just a mere oxidant of the iron(II) complex, but it can also increase the reactivity of the iron(IV)-oxo complex as a labile ligand. The detected HAT reactivities of the [(TPA)FeO(X)]+/2+ complexes correlate with the Fe=O and FeO-H stretching vibrations of the reactants and the respective products as determined by infrared photodissociation spectroscopy. Hence, the most reactive [(TPA)FeO(ArIO)]2+ adduct in the series has the weakest Fe=O bond and forms the strongest FeO-H bond in the HAT reaction.

Electrocatalytic Water Oxidation with α-[Fe(mcp)(OTf)2] and Analogues

The complex α-[Fe(mcp)(OTf)₂] (mcp = N,N′-dimethyl-N,N′-bis(pyridin-2-ylmethyl)-cyclohexane-1,2-diamine and OTf = trifluoromethanesulfonate anion) was reported in 2011 by some of us as an active water oxidation (WO) catalyst in the presence of sacrificial oxidants. However, because chemical oxidants are likely to take part in the reaction mechanism, mechanistic electrochemical studies are critical in establishing to what extent previous studies with sacrificial reagents have actually been meaningful. In this study, the complex α-[Fe(mcp)(OTf)₂] and its analogues were investigated electrochemically under both acidic and neutral conditions. All the systems under investigation proved to be electrochemically active toward the WO reaction, with no major differences in activity despite the structural changes. Our findings show that WO-catalyzed by mcp–iron complexes proceeds via homogeneous species, whereas the analogous manganese complex forms a heterogeneous deposit on the electrode surface. Mechanistic studies show that the reaction proceeds with a different rate-determining step (rds) than what was previously proposed in the presence of chemical oxidants. Moreover, the different kinetic isotope effect (KIE) values obtained electrochemically at pH 7 (KIE ∼ 10) and at pH 1 (KIE = 1) show that the reaction conditions have a remarkable effect on the rds and on the mechanism. We suggest a proton-coupled electron transfer (PCET) as the rds under neutral conditions, whereas at pH 1 the rds is most likely an electron transfer (ET).

Photochemical Water Oxidation Using a Doubly N-Confused Hexaphyrin Dinuclear Cobalt Complex

A doubly N-confused hexaphyrin dinuclear cobalt complex (Co₂DNCH) is revealed as an efficient water oxidation catalyst, outperforming the mononuclear cobalt porphyrin with the same aryl group as those in Co₂DNCH. By photoirradiation of a water/acetone-d₆ (9:1) mixture containing Co₂DNCH, [Ru^II(bpy)₃]²⁺, and S₂O₈^2- as the water oxidation catalyst, photosensitizer, and sacrificial electron acceptor, respectively, with visible light, O₂ was obtained as the maximum with turnover number = 1200, turnover frequency = 3.9 s^-1, and quantum yield = 0.30.

Engineering the Oxidative Potency of Non-Heme Iron(IV) Oxo Complexes in Water for C-H Oxidation by a cis Donor and Variation of the Second Coordination Sphere

A series of iron(IV) oxo complexes, which differ in the donor (CH₂py or CH₂COO^-) cis to the oxo group, three with hemilabile pendant donor/second coordination sphere base/acid arms (pyH/py or ROH), have been prepared in water at pH 2 and 7. The ν_Fe═O values of 832 ± 2 cm^-1 indicate similar Fe^IV═O bond strengths; however, different reactivities toward C-H substrates in water are observed. HAT occurs at rates that differ by 1 order of magnitude with nonclassical KIEs (k_H/k_D = 30-66) consistent with hydrogen atom tunneling. Higher KIEs correlate with faster reaction rates as well as a greater thermodynamic stability of the iron(III) resting states. A doubling in rate from pH 7 to pH 2 for substrate C-H oxidation by the most potent complex, that with a cis-carboxylate donor, [Fe^IVO(Htpena)]²⁺, is observed. Supramolecular assistance by the first and second coordination spheres in activating the substrate is proposed. The lifetime of this complex in the absence of a C-H substrate is the shortest (at pH 2, 3 h vs up to 1.3 days for the most stable complex), implying that slow water oxidation is a competing background reaction. The iron(IV)═O complex bearing an alcohol moiety in the second coordination sphere displays significantly shorter lifetimes due to a competing selective intramolecular oxidation of the ligand.

Molecular and heterogeneous water oxidation catalysts: recent progress and joint perspectives

The recent synthetic and mechanistic progress in molecular and heterogeneous water oxidation catalysts highlights the new, overarching strategies for knowledge transfer and unifying design concepts.

Transition metal-mediated O–O bond formation and activation in chemistry and biology

O–O bond formation and activation reactions proceed via multi-step reactions in chemistry and biology and involve similar reactive intermediates like metal–oxo/oxyl, metal–superoxo, and/or metal–(hydro)peroxo species.

Cyclopentadienone–NHC iron(0) complexes as low valent electrocatalysts for water oxidation

Design and application of earth abundant iron based molecular electrocatalysts for water oxidation, an essential challenge for sustainable energy applications.

Elucidation of Factors That Govern the 2e-/2H+ vs 4e-/4H+ Selectivity of Water Oxidation by a Cobalt Corrole

Considering the importance of water splitting as the best solution for clean and renewable energy, the worldwide efforts for development of increasingly active molecular water oxidation catalysts must be accompanied by studies that focus on elucidating the mode of actions and catalytic pathways. One crucial challenge remains the elucidation of the factors that determine the selectivity of water oxidation by the desired 4e^-/4H⁺ pathway that leads to O₂ rather than by 2e^-/2H⁺ to H₂O₂. We now show that water oxidation with the cobalt-corrole CoBr₈ as electrocatalyst affords H₂O₂ as the main product in homogeneous solutions, while heterogeneous water oxidation by the same catalyst leads exclusively to oxygen. Experimental and computation-based investigations of the species formed during the process uncover the formation of a Co(III)-superoxide intermediate and its preceding high-valent Co-oxyl complex. The competition between the base-catalyzed hydrolysis of Co(III)-hydroperoxide [Co(III)-OOH]^- to release H₂O₂ and the electrochemical oxidation of the same to release O₂ via [Co(III)-O₂^•]^- is identified as the key step determining the selectivity of water oxidation.

CeIV - and HClO4 -Promoted Assembly of an Fe2IV (μ-O)2 Diamond Core from its Monomeric FeIV =O Precursor at Room Temperature

Diiron(IV)-oxo species are proposed to effect the cleavage of strong C-H bonds by nonheme diiron enzymes such as soluble methane monooxygenase (sMMO) and fatty acid desaturases. However, synthetic mimics of such diiron(IV) oxidants are rare. Herein we report the reaction of (TPA*)FeII (1) (TPA*=tris(3,5-dimethyl-4-methoxypyridyl-2-methyl)amine) in CH3 CN with 4 equiv CAN and 200 equiv HClO4 at 20 °C to form a complex with an [FeIV2 (μ-O)2 ]4+ core. CAN and HClO4 play essential roles in this unprecedented transformation, in which the comproportionation of FeIII -O-CeIV and FeIV =O/Ce4+ species is proposed to be involved in the assembly of the [FeIV2 (μ-O)2 ]4+ core.

An Active-Site Sulfonate Group Creates a Fast Water Oxidation Electrocatalyst That Exhibits High Activity in Acid

The storage of solar energy in chemical bonds will depend on pH-universal catalysts that are not only impervious to acid, but actually thrive in it. Whereas other homogeneous water oxidation catalysts are less active in acid, we report a catalyst that maintained high electrocatalytic turnover frequency at pH values as low as 1.1 and 0.43 (k_cat =1501±608 s^-1 and 831±254 s^-1 , respectively). Moreover, current densities, related to catalytic reaction rates, ranged from 15 to 50 mA cm^-2  mM^-1 comparable to those reported for state-of-the-art heterogeneous catalysts and 30 to 100 times greater than those measured for two prominent literature homogeneous catalysts at pH 1.1 and 0.43. The catalyst also exhibited excellent durability when a chemical oxidant was used (Ce^IV , 7400 turnovers, TOF 0.88 s^-1 ). Preliminary computational studies suggest that the unusual active-site sulfonate group acts a proton relay even in strong acid, as intended.

Molecular and heterogenized dinuclear Ir-Cp* water oxidation catalysts bearing EDTA or EDTMP as bridging and anchoring ligands

The development of efficient water oxidation catalysts (WOCs) is of key importance in order to drive sustainable reductive processes aimed at producing renewable fuels. Herein, two novel dinuclear complexes, [(Cp*Ir)₂(μ-κ³-O,N,O-H₄-EDTMP)] (Ir-H₄-EDTMP, H₄-EDTMP^4- = ethylenediamine tetra(methylene phosphonate)) and [(Cp*Ir)₂(μ-κ³-O,N,O-EDTA)] (Ir-EDTA, EDTA^4- = ethylenediaminetetraacetate), were synthesized and completely characterized in solution, by multinuclear and multidimensional NMR spectroscopy, and in the solid state, by single crystal X-Ray diffraction. They were supported onto rutile TiO₂ nanocrystals obtaining Ir-H₄-EDTMP@TiO₂ and Ir-EDTA@TiO₂ hybrid materials. Both molecular complexes and hybrid materials were found to be efficient catalysts for WO driven by NaIO₄, providing almost quantitative yields, and TON values only limited by the amount of NaIO₄ used. As for the molecular catalysts, Ir-H₄-EDTMP (TOF up to 184 min^-1) exhibited much higher activity than Ir-EDTA (TOF up to 19 min^-1), likely owing to the higher propensity of the former to generate a coordination vacancy through the dissociation of a Ir-OP bond (2.123 Å, significantly longer than Ir-OC, 2.0913 Å), which is a necessary step to activate these saturated complexes. Ir-H₄-EDTMP@TiO₂ (up to 33 min^-1) and Ir-EDTA@TiO₂ (up to 41 min^-1) hybrid materials showed similar activity that was only marginally reduced in the second and third catalytic runs carried out after having separated the supernatant, which did not show any sign of activity, instead. The observed TOF values for hybrid materials are higher than those reported for analogous systems deriving from heterogenized mononuclear complexes. This suggests that supporting dinuclear molecular precursors could be a successful strategy to obtain efficient heterogenized water oxidation catalysts.

An Iron(III) Complex with Pincer Ligand—Catalytic Water Oxidation through Controllable Ligand Exchange

Pincer ligands occupy three coplanar sites at metal centers and often support both stability and reactivity. The five-coordinate [FeIIICl2(tia-BAI)] complex (tia-BAI− = 1,3-bis(2’-thiazolylimino)isoindolinate(−)) was considered as a potential pre-catalyst for water oxidation providing the active form via the exchange of chloride ligands to water molecules. The tia-BAI− pincer ligand renders water-insolubility to the Fe–(tia-BAI) assembly, but it tolerates the presence of water in acetone and produces electrocatalytic current in cyclic voltammetry associated with molecular water oxidation catalysis. Upon addition of water to [FeIIICl2(tia-BAI)] in acetone the changes in the Fe3+/2+ redox transition and the UV-visible spectra could be associated with solvent-dependent equilibria between the aqua and chloride complex forms. Immobilization of the complex from methanol on indium-tin-oxide (ITO) electrode by means of drop-casting resulted in water oxidation catalysis in borate buffer. The O2 detected by gas chromatography upon electrolysis at pH 8.3 indicates >80% Faraday efficiency by a TON > 193. The investigation of the complex/ITO assembly by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) before and after electrolysis, and re-dissolution tests suggest that an immobilized molecular catalyst is responsible for catalysis and de-activation occurs by depletion of the metal.

Current Understanding of the Mechanism of Water Oxidation in Photosystem II and Its Relation to XFEL Data

The investigation of water oxidation in photosynthesis has remained a central topic in biochemical research for the last few decades due to the importance of this catalytic process for technological applications. Significant progress has been made following the 2011 report of a high-resolution X-ray crystallographic structure resolving the site of catalysis, a protein-bound Mn4CaOxcomplex, which passes through ≥5 intermediate states in the water-splitting cycle. Spectroscopic techniques complemented by quantum chemical calculations aided in understanding the electronic structure of the cofactor in all (detectable) states of the enzymatic process. Together with isotope labeling, these techniques also revealed the binding of the two substrate water molecules to the cluster. These results are described in the context of recent progress using X-ray crystallography with free-electron lasers on these intermediates. The data are instrumental for developing a model for the biological water oxidation cycle.