Entropic cages for trapping DNA near a nanopore

Trapping and recapturing single DNA molecules with pore-cavity-pore device

Single-molecule detection technology is a technique capable of detecting molecules at the single-molecule level, characterized by high sensitivity, high resolution, and high specificity. Nanopore technology, as one of the single-molecule detection tools, is widely used to study the structure and function of biomolecules. In this study, we constructed a small-sized nanopore with a pore-cavity-pore structure, which can achieve a higher reverse capture rate. Through simulation, we investigated the electrical potential distribution of the nanopore with a pore-cavity-pore structure and analyzed the influence of pore size on the potential distribution. Accordingly, different pore sizes can be designed based on the radius of gyration of the target biomolecules, restricting their escape paths inside the chamber. In the future, nanopores with a pore-cavity-pore structure based on two-dimensional thin film materials are expected to be applied in single-molecule detection research, which provides new insights for various detection needs.

Translocation Dynamics of an Active Filament through a Long-Length Scale Channel

Active filament translocation through a confined space is crucial for diverse biological processes. By using Langevin dynamics simulations, we investigate the translocation dynamics of an axially self-propelled chain through a channel. First, results show a suggestive reciprocal scaling of translocation time versus active force. Second, in the case of a long channel, we demonstrate a very intriguing nonmonotonic change of translocation time with increasing channel width. The driving force shows a similar trend, providing a consistent picture to understand the unexpected channel width effect. In particular, in a moderately broad channel, the disordered chain conformation results in a loss of driving force and thus inhibits translocation dynamics. Chain adsorption might occur in a wide channel, which accounts for a facilitated translocation. Lastly, we connect the translocation process to tension propagation (TP). A modified TP picture is proposed to interpret the waiting time distribution. Our work highlights the new phenomenology owing to the crucial interplay of activity and spacial confinement, which drives the translocation dynamics, going beyond the traditional entropic barrier scenario.

Moving dynamics of a nanorobot with three DNA legs on nanopore-based tracks

DNA nanorobots have garnered increasing attention in recent years due to their unique advantages of modularity and algorithm simplicity. To accomplish specific tasks in complex environments, various walking strategies are required for the DNA legs of the nanorobot. In this paper, we employ computational simulations to investigate a well-designed DNA-legged nanorobot moving along a nanopore-based track on a planar membrane. The nanorobot consists of a large nanoparticle as the robot core and three single-stranded DNAs (ssDNAs) as the robot legs. The nanopores linearly embedded in the membrane serve as the toeholds for the robot legs. A charge gradient along the pore distribution mainly powers the activation of the nanorobot. The nanorobot can move in two modes: a walking mode, where the robot legs sequentially enter the nanopores, and a jumping mode, where the robot legs may skip a nanopore to reach the next one. Moreover, we observe that the moving dynamics of the nanorobot on the nanopore-based tracks depends on pore-pore distance, pore charge gradient, external voltage, and leg length.

Ejection dynamics of a semiflexible polymer from a nanosphere

Polymer ejection has been of interest due to its relation to the viral genome ejection. However, the ejection dynamics of a semiflexible polymer from a nanosphere is not yet understood. Here, a theory is developed for the ejection dynamics of a polymer with total length L_{0} and persistence length l from a sphere of diameter D. These length scales define different confinement regimes to study the polymer dynamics. The polymer sometimes undergoes between two to three regimes during its ejection. The rate of change of the free energy of confinement is balanced by the rate of energy dissipation, in each regime. The polymer experiences a final stage in which the free energy of polymer attachment to the sphere governs the ejection. The total ejection time τ depends on the polymer dynamics in the various regimes that it passes through in the phase space. Dependence of the ejection time on the polymer length, the persistence length, and the sphere diameter τ∝L_{0}^{α}D^{β}l^{γ} is obtained from the theory. It is shown that α changes between 1 and 1.7, β between 3 and 5, and γ takes a zero or positive value often smaller than 1. Agreement of these exponents with other theory and simulations are discussed.

Hydrophobic Gating and Spatial Confinement in Hierarchically Organized Block Copolymer-Nanopore Electrode Arrays for Electrochemical Biosensing of 4-Ethyl Phenol

Hydrophobic gating in biological transport proteins is regulated by stimulus-specific switching between filled and empty nanocavities, endowing them with selective mass transport capabilities. Inspired by these, solid-state nanochannels have been integrated into functional materials for a broad range of applications, such as energy conversion, filtration, and nanoelectronics, and here we extend these to electrochemical biosensors coupled to mass transport control elements. Specifically, we report hierarchically organized structures with block copolymers on tyrosinase-modified two-electrode nanopore electrode arrays (BCP@NEAs) as stimulus-controlled electrochemical biosensors for alkylphenols. A polystyrene-b-poly(4-vinyl)pyridine (PS-b-P4VP) membrane placed atop the NEA endows the system with potential-responsive gating properties, where water transport is spatially and temporarily gated through hydrophobic P4VP nanochannels by the application of appropriate potentials. The reversibility of hydrophobic voltage-gating makes it possible to capture and confine analyte species in the attoliter-volume vestibule of cylindrical nanopore electrodes, enabling redox cycling and yielding enhanced currents with amplification factors >100× when operated in a generator-collector mode. The enzyme-coupled sensing capabilities are demonstrated using nonelectroactive 4-ethyl phenol, exploiting the tyrosinase-catalyzed turnover into reversibly redox-active quinones, then using the quinone-catechol redox reaction to achieve ultrasensitive cycling currents in confined BCP@NEA sensors giving a limit-of-detection of ∼120 nM. The mass transport controlled sensing platform described here is relevant to the development of enzyme-coupled multiplex biosensors for sensitive and selective detection of biomarkers and metabolites in next-generation point-of-care devices.

Nature-Inspired Stalactite Nanopores for Biosensing and Energy Harvesting

Nature provides a wide range of self-assembled structures from the nanoscale to the macroscale. Under the right thermodynamic conditions and with the appropriate material supply, structures like stalactites, icicles, and corals can grow. However, the natural growth process is time-consuming. This work demonstrates a fast, nature-inspired method for growing stalactite nanopores using heterogeneous atomic deposition of hafnium dioxide at the orifice of templated silicon nitride apertures. The stalactite nanostructures combine the benefits of reduced sensing region typically for 2-dimensional material nanopores with the asymmetric geometry of capillaries, resulting in ionic selectivity, stability, and scalability. The proposed growing method provides an adaptable nanopore platform for basic and applied nanofluidic research, including biosensing, energy science, and filtration technologies.

Engineered entropic forces allow ultrastrong dynamical backaction

When confined within an optical cavity light can exert strong radiation pressure forces. Combined with dynamical backaction, this enables important processes, such as laser cooling, and applications ranging from precision sensors to quantum memories and interfaces. However, the magnitude of radiation pressure forces is constrained by the energy mismatch between photons and phonons. Here, we overcome this barrier using entropic forces arising from the absorption of light. We show that entropic forces can exceed the radiation pressure force by eight orders of magnitude and demonstrate this using a superfluid helium third-sound resonator. We develop a framework to engineer the dynamical backaction from entropic forces, applying it to achieve phonon lasing with a threshold three orders of magnitude lower than previous work. Our results present a pathway to exploit entropic forces in quantum devices and to study nonlinear fluid phenomena such as turbulence and solitons.

Multi-Stimuli-Responsive and Mechano-Actuated Biomimetic Membrane Nanopores Self-Assembled from DNA

In bioinspired design, biological templates are mimicked in structure and function by highly controllable synthetic means. Of interest are static barrel-like nanopores that enable molecular transport across membranes for use in biosensing, sequencing, and biotechnology. However, biological ion channels offer additional functions such as dynamic changes of the entire pore shape between open and closed states, and triggering of dynamic processes with biochemical and physical stimuli. To better capture this complexity, this report presents multi-stimuli and mechano-responsive biomimetic nanopores which are created with DNA nanotechnology. The nanopores switch between open and closed states, whereby specific binding of DNA and protein molecules as stimuli locks the pores in the open state. Furthermore, the physical stimulus of high transmembrane voltage switches the pores into a closed state. In addition, the pore diameters are larger and more tunable than those of natural templates. These multi-stimuli-responsive and mechanically actuated nanopores mimic several aspects of complex biological channels yet offer easier control over pore size, shape and stimulus response. The designer pores are expected to be applied in biosensing and synthetic biology.

A binary/digital approach to amino acid identification and its application to peptide sequencing and protein identification

A binary/digital method is proposed in theory for the identification of single amino acids (AAs) in the bulk or with a few molecules from a single binary measurement. Combined with Edman degradation (or other cleaving method), it can be used to sequence a peptide or identify the parent protein from a partial sequence. The approach is centered on the superspecificity property of transfer RNAs (tRNAs). Markedly different from conventional and recent single molecule (SM) sequencing methods based on analog measurements, it changes the analytical question 'Which AA is it?' to the much simpler one 'Is there an AA in the detection space?'. Each of 20 terminal residues cleaved from 20 copies of a peptide enters a different cavity with a unique tRNA; tRNA charging (or binding with AA) occurs only in the cavity with the cognate AA. The bound AA or the AA separated from the tRNA is detected with a single binary measurement; its identity is known from the position of the single high bit in the resulting 20-bit output. Alternatively, a 20-stage pipeline can be used with sparse samples. Detection of the bound AA can be done optically by tagging the AAs with a fluorescent dye, or of the freed AA electrically with a nanopore. Necessary conditions for accurate AA identification are satisfied in principle; related computations and simulation results are presented. A modified version that can be used for de novo sequencing in parallel of large numbers of peptides immobilized on a glass slide with the tRNAs carrying a fluorescent tag is also proposed. Both methods can be used for protein identification from partial sequences containing 2 or 3 AA types by using only the corresponding tRNAs. Experiments may be performed to validate them, followed by translation into practice with existing technology; potential implementation issues are discussed. Binary/digital amino acid identification for peptide sequencing.

Rapid Identification of DNA Fragments through Direct Sequencing with Electro-Optical Zero-Mode Waveguides

In contrast to sequence-specific techniques such as polymerase chain reaction, DNA sequencing does not require prior knowledge of the sample for surveying DNA. However, current sequencing technologies demand high inputs for a suitable library preparation, which typically necessitates DNA amplification, even for single-molecule sequencing methods. Here, electro-optical zero-mode waveguides (eZMWs) are presented, which can load DNA into the confinement of zero-mode waveguides with high efficiency and negligible DNA fragment length bias. Using eZMWs, highly efficient voltage-induced loading of DNA fragments of various sizes from ultralow inputs (nanogram-to-picogram levels) is observed. Rapid DNA fragment identification is demonstrated by burst sequencing of short and long DNA molecules (260 and 20 000 bp) loaded from an equimolar picomolar-level concentration mixture in just a few minutes. The device allows further studies in which low-input DNA capture is essential, for example, in epigenetics, where native DNA is required for obtaining modified base information.

Principles of Small-Molecule Transport through Synthetic Nanopores

Synthetic nanopores made from DNA replicate the key biological processes of transporting molecular cargo across lipid bilayers. Understanding transport across the confined lumen of the nanopores is of fundamental interest and of relevance to their rational design for biotechnological applications. Here we reveal the transport principles of organic molecules through DNA nanopores by synergistically combining experiments and computer simulations. Using a highly parallel nanostructured platform, we synchronously measure the kinetic flux across hundreds of individual pores to obtain rate constants. The single-channel transport kinetics are close to the theoretical maximum, while selectivity is determined by the interplay of cargo charge and size, the pores' sterics and electrostatics, and the composition of the surrounding lipid bilayer. The narrow distribution of transport rates implies a high structural homogeneity of DNA nanopores. The molecular passageway through the nanopore is elucidated via coarse-grained constant-velocity steered molecular dynamics simulations. The ensemble simulations pinpoint with high resolution and statistical validity the selectivity filter within the channel lumen and determine the energetic factors governing transport. Our findings on these synthetic pores' structure-function relationship will serve to guide their rational engineering to tailor transport selectivity for cell biological research, sensing, and drug delivery.

Extension of hydrodynamic chromatography to DNA fragment sizing and quantitation

Hydrodynamic chromatography (HDC) is a technique originally developed for separating particles. We have recently extended it to DNA fragment sizing and quantitation. In this review, we focus on this extension. After we briefly introduce the history of HDC, we present the evolution of open tubular HDC for DNA fragment sizing. We cover both the theoretical aspect and the experimental implementation of this technique. We describe various approaches to execute the separation, discuss its representative applications and provide a future perspective of this technique in the conclusion section of this review.

Investigation of entrance effects on particle electrophoretic behavior near a nanopore for resistive pulse sensing

Resistive pulse sensing using solid-state nanopores provides a unique platform for detecting the structure and concentration of molecules of different types of analytes in an electrolyte solution. The capture of an entity into a nanopore is subject not only to the electrostatic force but also the effect of electroosmotic flow originating from the charged nanopore surface. In this study, we theoretically analyze spherical particle electrophoretic behavior near the entrance of a charged nanopore. By investigating the effects of pore size, particle-pore distance, and salt concentration on particle velocity, we summarize dominant mechanisms governing particle behavior for a range of conditions. In the literature, the Helmholtz-Smoluchowski equation is often adopted to evaluate particle translocation by considering the zeta potential difference between the particle and nanopore surfaces. We point out that, due to the difference of the electric field inside and outside the nanopore and the influence from the existence of the particle itself, the zeta potential of the particle, however, needs to be at least 30% higher than that of the nanopore to allow the particle to enter into the nanopore when its velocity is close to zero. Accordingly, we summarize the effective salt concentrations that enable successful particle capture and detection for different pore sizes, offering direct guidance for nanopore applications.

Recent advances in integrated solid-state nanopore sensors

The advent of single-molecule probing techniques has revolutionized the biomedical and life science fields and has spurred the development of a new class of labs-on-chip based on powerful biosensors. Nanopores represent one of the most recent and most promising single molecule sensing paradigms that is seeing increased chip-scale integration for improved convenience and performance. Due to their physical structure, nanopores are highly sensitive, require low sample volume, and offer label-free, amplification-free, high-throughput real-time detection and identification of biomolecules. Over the last 25 years, nanopores have been extensively employed to detect a variety of biomolecules with a growing range of applicatons ranging from nucleic acid sequencing to ultrasensitive diagnostics to single-molecule biophysics. Nanopores, in particular those in solid-state membranes, also have the potential for integration with other technologies such as optics, plasmonics, microfluidics, and optofluidics to perform more complex tasks for an ever-expanding demand. A number of breakthrough results using integrated nanopore platforms have already been reported, and more can be expected as nanopores remain the focus of innovative research and are finding their way into commercial instruments. This review provides an overview of different aspects and challenges of nanopore technology with a focus on chip-scale integration of solid-state nanopores for biosensing and bioanalytical applications.

A general theory of polymer ejection tested in a quasi two-dimensional space

A general ejection theory of polymer is developed in a two- and three-dimensional space. A polymer is confined initially in a cavity and ejects spontaneously to the outer space through a nanopore channel without the help of any external stimulus. A reflective wall boundary is set at the pore entrance to prevent the falling of the head monomer of chain into the cavity. Three stages are distinguished in a process: (1) an entering stage, in which the head monomer enters the pore to search for a way to traverse the pore channel, (2) a main ejection stage, in which the chain body is transported from the cavity to the outer space, (3) a leaving stage, in which the tail monomer passes through and leaves the pore channel. Depending on the number of the monomers remaining in the cavity, the main ejection stage can be divided into the confined and the non-confined stages. The non-confined stage can be further split into the thermal escape and the entropic pulling stages. The Onsager’s variational principle is applied to derive the kinetics equation of ejection. The escape time is calculated from the corresponding Kramers’ escape problem. Extensive molecular dynamics simulations are then performed in a quasi two-dimensional space to verify the theory. The variation of the ejection speed is carefully examined. The decreasing behavior of the number of monomers in the cavity is studied in details. The scaling properties of the spending time at each processing stage are investigated systematically by varying the chain length, the cavity diameter, and the initial volume fraction of chain. The results of simulation support firmly the predictions of the theory, cross-checked in the studies of various topics. In combining with the previous investigations in the three-dimensional space, the generalized theory is very robust, able to explain the two seemly different phenomena, polymer ejection and polymer translocation, together under the same theoretical framework in the two space dimensions.

Resistive pulse sensing device with embedded nanochannel (nanochannel-RPS) for label-free biomolecule and bionanoparticle analysis

This paper reports an IC-compatible method for fabricating a PDMS-based resistive pulse sensing (RPS) device with embedded nanochannel (nanochannel-RPS) for label-free analysis of biomolecules and bionanoparticles, such as plasmid DNAs and exosomes. Here, a multilayer lithography process was proposed to fabricate the PDMS mold for the microfluidic device, comprising a bridging nanochannel, as the sensing gate. RPS was performed by placing the sensing and excitation electrodes symmetrically upstream and downstream of the sensing gate. In order to reduce the noise level, a reference electrode was designed and placed beside the excitation electrode. To demonstrate the feasibility of the proposed nanochannel-RPS device and sensing system, polystyrene micro- and nanoparticles with diameters of 1μm and 300 nm were tested by the proposed device with signal-to-noise ratios (SNR) ranging from 9.1-30.5 and 2.2-5.9, respectively. Furthermore, a nanochannel with height of 300 nm was applied for 4 kb plasmid DNA detection, implying the potential of the proposed method for label-free quantification of nanoscale biomolecules. Moreover, HeLa cell exosomes, known as a well-studied subtype of extracellular vesicles, were measured and analyzed by their size distribution. The result of the resistive pulse amplitude corresponded well to that of nanoparticle tracking analysis (NTA). The proposed nanochannel-RPS device and the sensing strategy are not only capable of label-free analysis for nanoscale biomolecules and bionanoparticles, but are also cost-effective for large-scale manufacturing.

Laser-based temperature control to study the roles of entropy and enthalpy in polymer-nanopore interactions

Single-molecule approaches for probing the free energy of confinement for polymers in a nanopore environment are critical for the development of nanopore biosensors. We developed a laser-based nanopore heating approach to monitor the free energy profiles of such a single-molecule sensor. Using this approach, we measure the free energy profiles of two distinct polymers, polyethylene glycol and water-soluble peptides, as they interact with the nanopore sensor. Polyethylene glycol demonstrates a retention mechanism dominated by entropy with little sign of interaction with the pore, while peptides show an enthalpic mechanism, which can be attributed to physisorption to the nanopore (e.g., hydrogen bonding). To manipulate the energetics, we introduced thiolate-capped gold clusters [Au25(SG)18] into the pore, which increases the charge and leads to additional electrostatic interactions that help dissect the contribution that enthalpy and entropy make in this modified environment. These observations provide a benchmark for optimization of single-molecule nanopore sensors.

Scaling Theory of a Polymer Ejecting from a Cavity into a Semi-Space

A two-stage model is developed in order to understand the scaling behaviors of single polymers ejecting from a spherical cavity through a nanopore. The dynamics of ejection is derived by balancing the free energy change with the energy dissipation during a process. The ejection velocity is found to vary with the number of monomers in the cavity, m, as mz1/(Nx1D3z1) at the confined stage, and it turns to be m−z2 at the non-confined stage, where N is the chain length and D the cavity diameter. The exponents are shown to be z1=(3ν−1)−1, z2=2ν and x1=1/3, with ν being the Flory exponent. The profile of the velocity is carefully verified by performing Langevin dynamics simulations. The simulations further reveal that, at the starting point, the decreasing of m can be stalled for a good moment. It suggests the existence of a pre-stage that can be explained by using the concept of a classical nucleation theory. By trimming the pre-stage, the ejection time are properly studied by varying N, D, and ϕ0 (the initial volume fraction). The scaling properties of the nucleation time are also analyzed. The results fully support the predictions of the theory. The physical pictures are given for various ejection conditions that cover the entire parameter space.

High-Fidelity Capture, Threading, and Infinite-Depth Sequencing of Single DNA Molecules with a Double-Nanopore System

Nanopore sequencing of nucleic acids has an illustrious history of innovations that eventually made commercial nanopore sequencing possible. Nevertheless, the present nanopore sequencing technology leaves much room for improvement, especially with respect to accuracy of raw reads and detection of nucleotide modifications. Double-nanopore sequencing-an approach where a DNA molecule is pulled back and forth by a tug-of-war of two nanopores-could potentially improve single-molecule read accuracy and modification detection by offering multiple reads of the same DNA fragment. One principle difficulty in realizing such a technology is threading single-stranded DNA through both nanopores. Here, we describe and demonstrate through simulations a nanofluidic system for loading and threading DNA strands through a double-nanopore setup with nearly 100% fidelity. The high-efficiency loading is realized by using hourglass-shaped side channels that not only deliver the molecules to the nanopore but also retain molecules that missed the nanopore at the first passage to attempt the nanopore capture again. The second nanopore capture is facilitated by an orthogonal microfluidic flow that unravels the molecule captured by the first nanopore and delivers it to the capture volume of the second nanopore. We demonstrate the potential utility of our double-nanopore system for DNA sequencing by simulating repeat back-and-forth motion-flossing-of a DNA strand through the double-nanopore system. We show that repeat exposure of the same DNA fragments to the nanopore sensing volume considerably increases accuracy of the nucleotide sequence determination and that correlated displacement of ssDNA through the two nanopores may facilitate recognition of homopolymer fragments.

A Nanoparticle-DNA Assembled Nanorobot Powered by Charge-Tunable Quad-Nanopore System

Molecular machines hold keys to performing intrinsic functions in living cells so that the organisms can work properly, and unveiling the mechanism of functional molecule machines as well as elucidating the dynamic process of interaction with their surrounding environment is an attractive pharmaceutical target for human health. Due to the limitations of searching and exploring all possible motors in human bodies, designing and constructing functional nanorobots is vital for meeting the fast-rising demand of revealing life science and related diagnostics. Here, we theoretically designed a nanoparticle-DNA assembled nanorobot that can move along a solid-state membrane surface. The nanorobot is composed of a nanoparticle and four single-stranded DNAs. Our molecular dynamics simulations show that electroosmosis could be the main power driving the movement of a nanorobot. After the DNA strands were one-to-one captured by the nanopores in the membrane, by tuning the surface charge density of each nanopore, we have theoretically shown that the electroosmosis coupled with electrophoresis can be used to drive the movement of the nanorobot in desired directions along the graphene membrane surface. It is believed that the well-controlled nanorobot will lead to many exciting applications, such as cargo delivery, nanomanipulation, and so on, if it is implemented in the near future.

Individually Addressable Multi-nanopores for Single-Molecule Targeted Operations

The fine-tuning of molecular transport is a ubiquitous problem of single-molecule methods. The latter is evident even in powerful single-molecule techniques such as nanopore sensing, where the quest for resolving more detailed biomolecular features is often limited by insufficient control of the dynamics of individual molecules within the detection volume of the nanopore. In this work, we introduce and characterize a reconfigurable multi-nanopore architecture that enables additional channels to manipulate the dynamics of DNA molecules in a nanopore. We show that the fabrication process of this device, consisting of four adjacent, individually addressable nanopores located at the tip of a quartz nanopipette, is fast and highly reproducible. By individually tuning the electric field across each nanopore, these devices can operate in several unique cooperative detection modes that allow moving, sensing, and trapping of DNA molecules with high efficiency and increased temporal resolution.

Scaling Behaviors of a Polymer Ejected from a Cavity through a Small Pore

Langevin dynamics simulations are performed to investigate ejection dynamics of spherically confined flexible polymers through a pore. By varying the chain length N and the initial volume fraction ϕ_{0} of the monomers, two scaling behaviors for the ejection velocity v on the monomer number m in the cavity are obtained: v∼m^{1.25}ϕ_{0}^{1.25}/N^{1.6} for large m and v∼m^{-1.4} as m is small. A robust scaling theory is developed by dividing the process into the confined and the nonconfined stages, and the dynamical equation is derived via the study of energy dissipation. After trimming the prior stage related to the escape of the head monomer across the pore, the evolution of m is shown to be well described by the scaling theory. The ejection time exhibits two proper scaling behaviors: N^{(2/3ν)+y_{1}}ϕ_{0}^{-(2/3ν)} and N^{2+y_{2}} under the large and small ϕ_{0} or N conditions, respectively, where y_{1}=1/3, y_{2}=1-ν, and ν is the Flory exponent.

Synthetic protein-conductive membrane nanopores built with DNA

Nanopores are key in portable sequencing and research given their ability to transport elongated DNA or small bioactive molecules through narrow transmembrane channels. Transport of folded proteins could lead to similar scientific and technological benefits. Yet this has not been realised due to the shortage of wide and structurally defined natural pores. Here we report that a synthetic nanopore designed via DNA nanotechnology can accommodate folded proteins. Transport of fluorescent proteins through single pores is kinetically analysed using massively parallel optical readout with transparent silicon-on-insulator cavity chips vs. electrical recordings to reveal an at least 20-fold higher speed for the electrically driven movement. Pores nevertheless allow a high diffusive flux of more than 66 molecules per second that can also be directed beyond equillibria. The pores may be exploited to sense diagnostically relevant proteins with portable analysis technology, to create molecular gates for drug delivery, or to build synthetic cells.

Osmotically Driven and Detected DNA Translocations

A salinity gradient propels a DNA molecule through a solid-state nanopore and generates an ionic current whose change allows for the detection of the translocation. Measurements and theoretical analyses reveal the role of diffusio-osmosis in driving these phenomena: After accounting for known salinity-dependent electrode effects, the measured current change caused by the presence of a DNA molecule inside the nanopore and the DNA translocation speed through it both increase with the magnitude of the applied salinity gradients. The effects are consistent with the theory of diffuisio-osmosis and strong enough to enable DNA translocations to overcome an applied retarding potential of tens of millivolts. This work illustrates how salinity gradients can be used to power and operate a nanopore sensor.

Complex DNA knots detected with a nanopore sensor

Equilibrium knots are common in biological polymers-their prevalence, size distribution, structure, and dynamics have been extensively studied, with implications to fundamental biological processes and DNA sequencing technologies. Nanopore microscopy is a high-throughput single-molecule technique capable of detecting the shape of biopolymers, including DNA knots. Here we demonstrate nanopore sensors that map the equilibrium structure of DNA knots, without spurious knot tightening and sliding. We show the occurrence of both tight and loose knots, reconciling previous contradictory results from different experimental techniques. We evidence the occurrence of two quantitatively different modes of knot translocation through the nanopores, involving very different tension forces. With large statistics, we explore the complex knots and, for the first time, reveal the existence of rare composite knots. We use parametrized complexity, in concert with simulations, to test the theoretical assumptions of the models, further asserting the relevance of nanopores in future investigation of knots.

Entropic Trapping of DNA with a Nanofiltered Nanopore

Elucidating the kinetics of DNA passage through a solid-state nanopore is a fertile field of research, and mechanisms for controlling capture, passage, and trapping of biopolymers are likely to find numerous technological applications. Here we present a nanofiltered nanopore device, which forms an entropic cage for DNA following first passage through the nanopore, trapping the translocated DNA and permitting recapture for subsequent reanalysis and investigation of kinetics of passage under confinement. We characterize the trapping properties of this nanodevice by driving individual DNA polymers into the nanoscale gap separating the nanofilter and the pore, forming an entropic cage similar to a "two pores in series" device, leaving polymers to diffuse in the cage for various time lengths, and attempting to recapture the same molecule. We show that the cage results in effectively permanent trapping when the radius of gyration of the target polymer is significantly larger than the radii of the pores in the nanofilter. We also compare translocation dynamics as a function of translocation direction in order to study the effects of confinement on DNA just prior to translocation, providing further insight into the nanopore translocation process. This nanofiltered nanopore device realizes simple fabrication of a femtoliter nanoreactor in which to study fundamental biophysics and biomolecular reactions on the single-molecule level. The device provides an electrically-permeable single-molecule trap with a higher entropic barrier to escape than previous attempts to fabricate similar structures.

Polymer translocation into cavities: Effects of confinement geometry, crowding, and bending rigidity on the free energy

Monte Carlo simulations are used to study the translocation of a polymer into a cavity. Modeling the polymer as a hard-sphere chain with a length up to N=601 monomers, we use a multiple-histogram method to measure the variation of the conformational free energy of the polymer with respect to the number of translocated monomers. The resulting free-energy functions are then used to obtain the confinement free energy for the translocated portion of the polymer. We characterize the confinement free energy for a flexible polymer in cavities with constant cross-sectional area A for various cavity shapes (cylindrical, rectangular, and triangular) as well as for tapered cavities with pyramidal and conical shape. The scaling of the free energy with cavity volume and translocated polymer subchain length is generally consistent with predictions from simple scaling arguments, with small deviations in the scaling exponents likely due to finite-size effects. The confinement free energy depends strongly on cavity shape anisometry and is a minimum for an isometric cavity shape with a length-to-width ratio of unity. Entropic depletion at the edges or vertices of the confining cavity are evident in the results for constant-A and pyramidal cavities. For translocation into infinitely long cones, the scaling of the free energy with taper angle is consistent with a theoretical prediction employing the blob model. We also examine the effects of polymer bending rigidity on the translocation free energy for cylindrical cavities. For isometric cavities, the observed scaling behavior is in partial agreement with theoretical predictions, with discrepancies arising from finite-size effects that prevent the emergence of well-defined scaling regimes. In addition, translocation into highly anisometric cylindrical cavities leads to a multistage folding process for stiff polymers. Finally, we examine the effects of crowding agents inside the cavity. We find that the confinement free energy increases with crowder density. At constant packing fraction the magnitude of this effect lessens with increasing crowder size for a crowder-to-monomer size ratio ≥1.

Single-Molecule Analysis with Solid-State Nanopores

Solid-state nanopores and nanopipettes are an exciting class of single-molecule sensors that has grown enormously over the last two decades. They offer a platform for testing fundamental concepts of stochasticity and transport at the nanoscale, for studying single-molecule biophysics and, increasingly, also for new analytical applications and in biomedical sensing. This review covers some fundamental aspects underpinning sensor operation and transport and, at the same time, it aims to put these into context as an analytical technique. It highlights new and recent developments and discusses some of the challenges lying ahead.

Computational modeling of ionic currents through difform graphene nanopores with consistent cross-sectional areas

Unveiling the mystery of ion transport behavior in nanopores with consistent cross-sectional areas shows that this behavior is highly related to the geometry and hydrophobicity of the nanopores.

The temporal resolution and single-molecule manipulation of a solid-state nanopore by pressure and voltage

The translocation of DNA molecules through nanopores has attracted wide interest for single-molecule detection. However, the multiple roles of electric fields fundamentally constrain the deceleration and motion control of DNA translocation. In this paper, we show how a single anchored DNA molecule can be manipulated for repeated capture using a transmembrane pressure gradient. Continuously and slowly changing the magnitude of the pressure provided two opposite directions for the force field inside a nanopore, and we observed an anchored DNA molecule entering the nanopore throughout the process from tentative to total entry. The use of both voltage and pressure across a nanopore provides an alternative method to capture, detect and manipulate a DNA molecule at the single-molecule level.

Single Molecule DNA Resensing Using a Two-Pore Device

A nanofluidic device is presented that, enables independent sensing and resensing of a single DNA molecule translocating through two nanopores with sub-micrometer spacing. The device concept is based upon integrating a thin nitride membrane with microchannels etched in borosilicate glass. Pores, coupled to each microchannel, are connected via a fluid-filled half-space on the device backside, enabling translocation of molecules across each pore in sequence. Critically, this approach allows for independent application of control voltage and measurement of trans-pore ionic current at each of the two pores, leading to 1) controlled assessment of molecular time of flight, 2) voltage-tuned selective molecule recapture, and 3) ability to acquire two correlated translocation signatures for each molecule analyzed. Finally, the rare cocapture of a single chain threading simultaneously through each of the two pores is reported.

Entropic Trapping of a Singly Charged Molecule in Solution

We demonstrate the ability to confine a single molecule in solution by spatial modulation of its local configurational entropy. Previously we established electrostatic trapping of a charged macromolecule by geometric tailoring of a repulsive electrical interaction potential in a parallel plate system. However, since the lifetime of the trapped state depends exponentially on the electrical charge of the molecule, the electrostatic interaction alone is often insufficient in magnitude to stably confine molecules carrying a net charge of magnitude ≤5 e. Here we show that the configurational entropy of a thermally fluctuating molecule in a geometrically modulated system can be exploited to spatially confine weakly charged molecules in solution. Measurement of the configurational entropy contribution reveals good agreement with theoretical expectations. This additional translational contribution to the total free energy facilitates direct optical imaging and measurement of the effective charge of molecules on the size scale of ∼1 nm and a charge as low as 1 e, physical properties comparable with those of a monovalent ion in solution.

Double Barrel Nanopores as a New Tool for Controlling Single-Molecule Transport

The ability to control the motion of single biomolecules is key to improving a wide range of biophysical and diagnostic applications. Solid-state nanopores are a promising tool capable of solving this task. However, molecular control and the possibility of slow readouts of long polymer molecules are still limited due to fast analyte transport and low signal-to-noise ratios. Here, we report on a novel approach of actively controlling analyte transport by using a double-nanopore architecture where two nanopores are separated by only a ∼ 20 nm gap. The nanopores can be addressed individually, allowing for two unique modes of operation: (i) pore-to-pore transfer, which can be controlled at near 100% efficiency, and (ii) DNA molecules bridging between the two nanopores, which enables detection with an enhanced temporal resolution (e.g., an increase of more than 2 orders of magnitude in the dwell time) without compromising the signal quality. The simplicity of fabrication and operation of the double-barrel architecture opens a wide range of applications for high-resolution readout of biological molecules.

DNA Translocations through Nanopores under Nanoscale Preconfinement

To reduce unwanted variation in the passage speed of DNA through solid-state nanopores, we demonstrate nanoscale preconfinement of translocating molecules using an ultrathin nanoporous silicon nitride membrane separated from a single sensing nanopore by a nanoscale cavity. We present comprehensive experimental and simulation results demonstrating that the presence of an integrated nanofilter within nanoscale distances of the sensing pore eliminates the dependence of molecular passage time distributions on pore size, revealing a global minimum in the coefficient of variation of the passage time. These results provide experimental verification that the inter- and intramolecular passage time variation depends on the conformational entropy of each molecule prior to translocation. Furthermore, we show that the observed consistently narrower passage time distributions enables a more reliable DNA length separation independent of pore size and stability. We also demonstrate that the composite nanofilter/nanopore devices can be configured to suppress the frequency of folded translocations, ensuring single-file passage of captured DNA molecules. By greatly increasing the rate at which usable data can be collected, these unique attributes will offer significant practical advantages to many solid-state nanopore-based sensing schemes, including sequencing, genomic mapping, and barcoded target detection.

Gate-Voltage-Controlled Threading DNA into Transistor Nanopores

We present a simple method for DNA translocation driven by applying AC voltages, such as square and sawtooth waves, on an embedded thin film as a gate electrode inside of a dielectric nanopore, without applying a conventional bias voltage externally across the pore membrane. Square waveforms on a gate can drive a single DNA molecule into a nanopore, which often returns from the pore, causing an oscillation across the membrane. An optimized sawtooth-like negative voltage pulse on the gate can thread a fraction of a DNA molecule into a pore after a single pulse. This trapped DNA molecule continues to finish its translocation slowly through the pore. The DNA's slow speed was comparable to previous findings of the escaping DNA speed from a nanopore estimated by the Smoluchowski equation with excluded-volume interactions of a long-chain molecule and electrophoresis by extremely low electric fields. This simple scheme, controlling DNA molecules only by gate potential modulation at a nanopore, will provide an additional method to thread, translocate, or oscillate a single biomolecule at a gated nanopore.

Length-independent DNA packing into nanopore zero-mode waveguides for low-input DNA sequencing

Compared with conventional methods, single-molecule real-time (SMRT) DNA sequencing exhibits longer read lengths than conventional methods, less GC bias, and the ability to read DNA base modifications. However, reading DNA sequence from sub-nanogram quantities is impractical owing to inefficient delivery of DNA molecules into the confines of zero-mode waveguides-zeptolitre optical cavities in which DNA sequencing proceeds. Here, we show that the efficiency of voltage-induced DNA loading into waveguides equipped with nanopores at their floors is five orders of magnitude greater than existing methods. In addition, we find that DNA loading is nearly length-independent, unlike diffusive loading, which is biased towards shorter fragments. We demonstrate here loading and proof-of-principle four-colour sequence readout of a polymerase-bound 20,000-base-pair-long DNA template within seconds from a sub-nanogram input quantity, a step towards low-input DNA sequencing and mammalian epigenomic mapping of native DNA samples.

Single Molecule Trapping and Sensing Using Dual Nanopores Separated by a Zeptoliter Nanobridge

There is a growing realization, especially within the diagnostic and therapeutic community, that the amount of information enclosed in a single molecule can not only enable a better understanding of biophysical pathways, but also offer exceptional value for early stage biomarker detection of disease onset. To this end, numerous single molecule strategies have been proposed, and in terms of label-free routes, nanopore sensing has emerged as one of the most promising methods. However, being able to finely control molecular transport in terms of transport rate, resolution, and signal-to-noise ratio (SNR) is essential to take full advantage of the technology benefits. Here we propose a novel solution to these challenges based on a method that allows biomolecules to be individually confined into a zeptoliter nanoscale droplet bridging two adjacent nanopores (nanobridge) with a 20 nm separation. Molecules that undergo confinement in the nanobridge are slowed down by up to 3 orders of magnitude compared to conventional nanopores. This leads to a dramatic improvement in the SNR, resolution, sensitivity, and limit of detection. The strategy implemented is universal and as highlighted in this manuscript can be used for the detection of dsDNA, RNA, ssDNA, and proteins.

Translocation Time through a Nanopore with an Internal Cavity Is Minimal for Polymers of Intermediate Length

The translocation of polymers through nanopores with large internal cavities bounded by two narrow pores is studied via Langevin dynamics simulations. The total translocation time is found to be a nonmonotonic function of polymer length, reaching a minimum at intermediate length, with both shorter and longer polymers taking longer to translocate. The location of the minimum is shown to shift with the magnitude of the applied force, indicating that the pore can be dynamically tuned to favor different polymer lengths. A simple model balancing the effects of entropic trapping within the cavity against the driving force is shown to agree well with simulations. Beyond the nonmonotonicity, detailed analysis of translocation uncovers rich dynamics in which factors such as going to a high force regime and the emergence of a tail for long polymers dramatically change the behavior of the system. These results suggest that nanopores with internal cavities can be used for applications such as selective extraction of polymers by length and filtering of polymer solutions, extending the uses of nanopores within emerging nanofluidic technologies.

Electroosmotic Trap Against the Electrophoretic Force Near a Protein Nanopore Reveals Peptide Dynamics During Capture and Translocation

We report on the ability to control the dynamics of a single peptide capture and passage across a voltage-biased, α-hemolysin nanopore (α-HL), under conditions that the electroosmotic force exerted on the analyte dominates the electrophoretic transport. We demonstrate that by extending outside the nanopore, the electroosmotic force is able to capture a peptide at either the lumen or vestibule entry of the nanopore, and transiently traps it inside the nanopore, against the electrophoretic force. Statistical analysis of the resolvable dwell-times of a metastable trapped peptide, as it occupies either the β-barrel or vestibule domain of the α-HL nanopore, reveals rich kinetic details regarding the direction and rates of stochastic movement of a peptide inside the nanopore. The presented approach demonstrates the ability to shuttle and study molecules along the passage pathway inside the nanopore, allows to identify the mesoscopic trajectory of a peptide exiting the nanopore through either the vestibule or β-barrel moiety, thus providing convincing proof of a molecule translocating the pore. The kinetic analysis of a peptide fluctuating between various microstates inside the nanopore, enabled a detailed picture of the free energy description of its interaction with the α-HL nanopore. When studied at the limit of vanishingly low transmembrane potentials, this provided a thermodynamic description of peptide reversible binding to and within the α-HL nanopore, under equilibrium conditions devoid of electric and electroosmotic contributions.

Nanopore-Based Target Sequence Detection

The promise of portable diagnostic devices relies on three basic requirements: comparable sensitivity to established platforms, inexpensive manufacturing and cost of operations, and the ability to survive rugged field conditions. Solid state nanopores can meet all these requirements, but to achieve high manufacturing yields at low costs, assays must be tolerant to fabrication imperfections and to nanopore enlargement during operation. This paper presents a model for molecular engineering techniques that meets these goals with the aim of detecting target sequences within DNA. In contrast to methods that require precise geometries, we demonstrate detection using a range of pore geometries. As a result, our assay model tolerates any pore-forming method and in-situ pore enlargement. Using peptide nucleic acid (PNA) probes modified for conjugation with synthetic bulk-adding molecules, pores ranging 15-50 nm in diameter are shown to detect individual PNA-bound DNA. Detection of the CFTRΔF508 gene mutation, a codon deletion responsible for ∼66% of all cystic fibrosis chromosomes, is demonstrated with a 26-36 nm pore size range by using a size-enhanced PNA probe. A mathematical framework for assessing the statistical significance of detection is also presented.

Plasmonic Nanopores for Trapping, Controlling Displacement, and Sequencing of DNA

With the aim of developing a DNA sequencing methodology, we theoretically examine the feasibility of using nanoplasmonics to control the translocation of a DNA molecule through a solid-state nanopore and to read off sequence information using surface-enhanced Raman spectroscopy. Using molecular dynamics simulations, we show that high-intensity optical hot spots produced by a metallic nanostructure can arrest DNA translocation through a solid-state nanopore, thus providing a physical knob for controlling the DNA speed. Switching the plasmonic field on and off can displace the DNA molecule in discrete steps, sequentially exposing neighboring fragments of a DNA molecule to the pore as well as to the plasmonic hot spot. Surface-enhanced Raman scattering from the exposed DNA fragments contains information about their nucleotide composition, possibly allowing the identification of the nucleotide sequence of a DNA molecule transported through the hot spot. The principles of plasmonic nanopore sequencing can be extended to detection of DNA modifications and RNA characterization.

Fabrication and characterization of nanopore-interfaced nanochannel devices

Nanofluidic devices combining nanochannels and nanopores may enable a range of novel applications in the field of single-molecule biosensing and manipulation. Here we combine classic lithographically based fabrication and electron beam milling to construct a device that integrates sealed transverse features, such as nanocavities and nanochannels, with embedded pores vertically intersecting the nanochannels. Using fluorescent microscopy, we demonstrate that DNA molecules can be introduced into the nanochannels and translated transversely across the embedded pore in an extended-conformation without undergoing cross-pore translocation. Upon application of a trans-pore voltage drop, the molecules will undergo cross-pore translocation into an adjoining macroscopic reservoir.

Analytical applications for pore-forming proteins

Proteinaceous nanometer-scale pores are ubiquitous in biology. The canonical ionic channels (e.g., those that transport Na(+), K(+), Ca(2+), and Cl(-) across cell membranes) play key roles in many cellular processes, including nerve and muscle activity. Another class of channels includes bacterial pore-forming toxins, which disrupt cell function, and can lead to cell death. We describe here the recent development of these toxins for a wide range of biological sensing applications. This article is part of a Special Issue entitled: Pore-Forming Toxins edited by Mauro Dalla Serra and Franco Gambale.

Fabrication of 3-nm-thick Si3N4 membranes for solid-state nanopores using the poly-Si sacrificial layer process

To improve the spatial resolution of solid-state nanopores, thinning the membrane is a very important issue. The most commonly used membrane material for solid-state nanopores is silicon nitride (Si3N4). However, until now, stable wafer-scale fabrication of Si3N4 membranes with a thickness of less than 5 nm has not been reported, although a further reduction in thickness is desired to improve spatial resolution. In the present study, to fabricate thinner Si3N4 membranes with a thickness of less than 5 nm in a wafer, a new fabrication process that employs a polycrystalline-Si (poly-Si) sacrificial layer was developed. This process enables the stable fabrication of Si3N4 membranes with thicknesses of 3 nm. Nanopores were fabricated in the membrane using a transmission electron microscope (TEM) beam. Based on the relationship between the ionic current through the nanopores and their diameter, the effective thickness of the nanopores was estimated to range from 0.6 to 2.2 nm. Moreover, DNA translocation through the nanopores was observed.

Transition state theory approach to polymer escape from a one dimensional potential well

The rate of escape of an ideal bead-spring polymer in a symmetric double-well potential is calculated using transition state theory (TST) and the results compared with direct dynamical simulations. The minimum energy path of the transitions becomes flat and the dynamics diffusive for long polymers making the Kramers-Langer estimate poor. However, TST with dynamical corrections based on short time trajectories started at the transition state gives rate constant estimates that agree within a factor of two with the molecular dynamics simulations over a wide range of bead coupling constants and polymer lengths. The computational effort required by the TST approach does not depend on the escape rate and is much smaller than that required by molecular dynamics simulations.