Ultradispersity of diamond at the nanoscale

Laser Engineering Nanocarbon Phases within Diamond for Science and Electronics

Diamond, as the densest allotrope of carbon, displays a range of exemplary material properties that are attractive from a device perspective. Despite diamond displaying high carbon-carbon bond strength, ultrashort (femtosecond) pulse laser radiation can provide sufficient energy for highly localized internal breakdown of the diamond lattice. The less-dense carbon structures generated on lattice breakdown are subject to significant pressure from the surrounding diamond matrix, leading to highly unusual formation conditions. By tailoring the laser dose delivered to the diamond, it is shown that it is possible to create continuously modified internal tracks with varying electrical conduction properties. In addition to the widely reported conducting tracks, conditions leading to semiconducting and insulating written tracks have been identified. High-resolution transmission electron microscopy (HRTEM) is used to visualize the structural transformations taking place and provide insight into the different conduction regimes. The HRTEM reveals a highly diverse range of nanocarbon structures are generated by the laser irradiation, including many signatures for different so-called diaphite complexes, which have been seen in meteorite samples and seem to mediate the laser-induced breakdown of the diamond. This work offers insight into possible formation methods for the diamond and related nanocarbon phases found in meteorites.

Infrared spectrum of the 1-cyanoadamantane cation: evidence of hydrogen transfer and cage-opening upon ionization

The radical cations of diamondoids are important intermediates in their functionalization reactions and are also candidates as carriers for astronomical absorption and emission features. Although neutral diamondoids have been studied extensively, information regarding their radical cations is largely lacking, particularly for functionalized diamondoid derivatives. Herein, we characterize the structure of the 1-cyanoadamantane radical cation (C10H15CN+, AdCN+) using infrared photodissociation (IRPD) spectroscopy of mass selected AdCN+N2 clusters in the XH stretch range (2400-3500 cm-1) and dispersion-corrected density functional theory calculations (B3LYP-D3BJ/cc-pVTZ). A group of three distinct CH stretch bands are observed in the 2800-3000 cm-1 range, in addition to a highly redshifted absorption at 2580 cm-1 attributed to the acidic CH proton predicted by calculations. An unexpected broad absorption peaking at 3320 cm-1 is also detected and assigned to an NH stretch mode based on its width and frequency. Calculations indicate that hydrogen atom transfer (HAT) from the adamantyl cage (C10H15, Ady) to the N atom of the CN group yields lower energy structures, with an open-cage isomer exhibiting such hydrogen transfer being the global minimum on the potential energy surface. The energy barriers involved in the formation of this open-cage isomer are also lower than those calculated for generation of the analogous open-cage 1-amantadine cation isomer which has previously been identified by IRPD. The combined consideration of IRPD spectra and calculations indicates a major population of the nascent canonical closed-cage isomer and a smaller population of the global minimum isomer featuring both cage-opening and hydrogen transfer.

Self-Limiting Sub-5 nm Nanodiamonds by Geochemistry-Inspired Synthesis

Controlling diamond structures with nanometer precision is fundamentally challenging owing to their extreme and far-from-equilibrium synthetic conditions. State-of-the-art techniques, including detonation, chemical vapor deposition, mechanical grinding, and high-pressure-high-temperature synthesis, yield nanodiamond particles with a broad distribution of sizes. Despite many efforts, the direct synthesis of nanodiamonds with precisely controlled diameters remains elusive. Here the geochemistry-inspired synthesis of sub-5 nm nanodiamonds with sub-nanometer size deviation is described. High-pressure-high-temperature treatment of uniform iron carbide nanoparticles embedded in iron oxide matrices yields nanodiamonds with tunable diameters down to 2.13 and 0.22 nm standard deviation. A self-limiting, redox-driven, and diffusion-controlled solid-state reaction mechanism is proposed and supported by in situ X-ray diffraction, ex situ characterizations, and computational modeling. This work provides a unique mechanism for the precise control of nanostructured diamonds under extreme conditions and paves the road for the full realization of their potential in emerging technologies.

Microhydration of the adamantane cation: intracluster proton transfer to solvent in [Ad(H2O)n=1-5]+ for n ≥ 3

Radical cations of diamondoids are important intermediates in their functionalization reactions in polar solvents. To explore the role of the solvent at the molecular level, we characterize herein microhydrated radical cation clusters of the parent molecule of the diamondoid family, adamantane (C₁₀H₁₆, Ad), by infrared photodissociation (IRPD) spectroscopy of mass-selected [Ad(H₂O)_n=1-5]⁺ clusters. IRPD spectra of the cation ground electronic state recorded in the CH/OH stretch and fingerprint ranges reveal the first steps of this fundamental H-substitution reaction at the molecular level. Analysis of size-dependent frequency shifts with dispersion-corrected density functional theory calculations (B3LYP-D3/cc-pVTZ) provides detailed information about the acidity of the proton of Ad⁺ as a function of the degree of hydration, the structure of the hydration shell, and the strengths of the CH⋯O and OH⋯O hydrogen bonds (H-bonds) of the hydration network. For n = 1, H₂O strongly activates the acidic C-H bond of Ad⁺ by acting as a proton acceptor in a strong CH⋯O ionic H-bond with cation-dipole configuration. For n = 2, the proton is almost equally shared between the adamantyl radical (C₁₀H₁₅, Ady) and the (H₂O)₂ dimer in a strong C⋯H⋯O ionic H-bond. For n ≥ 3, the proton is completely transferred to the H-bonded hydration network. The threshold for this size-dependent intracluster proton transfer to solvent is consistent with the proton affinities of Ady and (H₂O)_n and confirmed by collision-induced dissociation experiments. Comparison with other related microhydrated cations reveals that the acidity of the CH proton of Ad⁺ is in the range of strongly acidic phenol⁺ but lower than for cationic linear alkanes such as pentane⁺. Significantly, the presented IRPD spectra of microhydrated Ad⁺ provide the first spectroscopic molecular-level insight of the chemical reactivity and reaction mechanism of the important class of transient diamondoid radical cations in aqueous solution.

Application of Nano-Crystalline Diamond in Tribology

Nano-crystalline diamond has been extensively researched and applied in the fields of tribology, optics, quantum information and biomedicine. In virtue of its hardness, the highest in natural materials, diamond outperforms the other materials in terms of wear resistance. Compared to traditional single-crystalline and poly-crystalline diamonds, nano-crystalline diamond consists of disordered grains and thus possesses good toughness and self-sharpening. These merits render nano-crystalline diamonds to have great potential in tribology. Moreover, the re-nucleation of nano-crystalline diamond during preparation is beneficial to decreasing surface roughness due to its ultrafine grain size. Nano-crystalline diamond coatings can have a friction coefficient as low as single-crystal diamonds. This article briefly introduces the approaches to preparing nano-crystalline diamond materials and summarizes their applications in the field of tribology. Firstly, nano-crystalline diamond powders can be used as additives in both oil- and water-based lubricants to significantly enhance their anti-wear property. Nano-crystalline diamond coatings can also act as self-lubricating films when they are deposited on different substrates, exhibiting excellent performance in friction reduction and wear resistance. In addition, the research works related to the tribological applications of nano-crystalline diamond composites have also been reviewed in this paper.

The Effect of Electro-Induced Multi-Gas Modification on Polymer Substrates’ Surface Structure for Additive Manufacturing

We investigated the effect of electro-induced multi-gas modification (EIMGM) duration on the adhesion and wear resistance of PET and LDPE polymer substrates used in the printing industry. It was found that EIMGM increases the polar component and the complete free surface energy from 26 to 57 mJ/m2 for LDPE and from 37 to 67 mJ/m2 for PET (due to the formation of oxygen-containing groups on the surface of the materials). Although the degree of textural and morphological heterogeneity of the modified LDPE increased more than twice compared to the initial state, it is not still suitable for application as a substrate in extrusion 3D printing. However, for PET, the plasma-chemical modification contributed to a significant increase (~5 times) in filament adhesion to its surface (due to chemical and morphological transformations of the surface layers) which allows for using the FFF technology for additive prototyping on the modified PET-substrates.

Microhydrated clusters of a pharmaceutical drug: infrared spectra and structures of amantadineH+(H2O)n

Solvation of pharmaceutical drugs has an important effect on their structure and function. Analysis of infrared photodissociation spectra of amantadineH⁺(H₂O)_n=1-4 clusters in the sensitive OH, NH, and CH stretch range by quantum chemical calculations (B3LYP-D3/cc-pVTZ) provides a first impression of the interaction of this pharmaceutically active cation with water at the molecular level. The size-dependent frequency shifts reveal detailed information about the acidity of the protons of the NH₃⁺ group of N-protonated amantadineH⁺ (AmaH⁺) and the strength of the NH⋯O and OH⋯O hydrogen bonds (H-bonds) of the hydration network. The preferred cluster growth begins with sequential hydration of the NH₃⁺ group by NH⋯O ionic H-bonds (n = 1-3), followed by the extension of the solvent network through OH⋯O H-bonds. However, smaller populations of cluster isomers with an H-bonded solvent network and free N-H bonds are already observed for n ≥ 2, indicating the subtle competition between noncooperative ion hydration and cooperative H-bonding. Interestingly, cyclic water ring structures are identified for n ≥ 3, each with two NH⋯O and two OH⋯O H-bonds. Despite the increasing destabilization of the N-H proton donor bonds upon gradual hydration, no proton transfer to the (H₂O)_n solvent cluster is observed up to n = 4. In addition to ammonium cluster ions, a small population of microhydrated iminium isomers is also detected, which is substantially lower for the hydrophilic H₂O than for the hydrophobic Ar environment.

Electronic spectroscopy of cationic adamantane clusters and dehydrogenated adamantane in helium droplets

We report the first helium-tagged electronic spectra of cationic adamantane clusters, along with its singly, doubly, and triply dehydrogenated analogues embedded in helium droplets. Absorption spectra were measured by recording the evaporation of helium atoms as a function of laser wavelength in the range of 300-2150 nm. Experimental spectra are coupled with simulated spectra obtained from quantum chemical calculations. The spectrum of cationic adamantane agrees with the electronic photodissociation spectrum measured previously, with an additional low-energy absorption at around 1000 nm. The spectra of the dehydrogenated molecules present broad absorptions exclusively in the high-energy region (300-600 nm). For the higher order adamantane dimer and trimer ions, strong absorptions are observed in the low-energy region (900-2150 nm), rationalised by transitions delocalised over two adamantane units.

Infrared spectra and structures of protonated amantadine isomers: detection of ammonium and open-cage iminium ions

The protonated form of amantadine (1-C₁₀H₁₅NH₂, Ama), the amino derivative of adamantane (C₁₀H₁₆, Ada), is a wide-spread antiviral and anti-Parkinsonian drug and plays a key role in many pharmaceutical processes. Recent studies reveal that the adamantyl cage (C₁₀H₁₅) of Ama can open upon ionization leading to distonic bicyclic iminium isomers, in addition to the canonical nascent Ama⁺ isomer. Herein, we study protonation of Ama using infrared photodissociation spectroscopy (IRPD) of Ar-tagged ions and density functional theory calculations to characterize cage and open-cage isomers of AmaH⁺ and the influence of the electron-donating NH₂ group on the cage-opening reaction potential. In addition to the canonical ammonium isomer (AmaH⁺(I)) with an intact adamantyl cage, we identify at least one slightly less stable protonated bicyclic iminium ion (AmaH⁺(II)). While the ammonium ion is generated by protonation of the basic NH₂ group, AmaH⁺(II) is formally formed by H addition to a distonic bicyclic iminium ion produced upon ionization of Ama and subsequent cage opening.

Opening of the Diamondoid Cage upon Ionization Probed by Infrared Spectra of the Amantadine Cation Solvated by Ar, N2 , and H2 O

Radical cations of diamondoids, a fundamental class of very stable cyclic hydrocarbon molecules, play an important role in their functionalization reactions and the chemistry of the interstellar medium. Herein, we characterize the structure, energy, and intermolecular interaction of clusters of the amantadine radical cation (Ama⁺, 1‐aminoadamantane) with solvent molecules of different interaction strength by infrared photodissociation (IRPD) spectroscopy of mass‐selected Ama⁺L_n clusters, with L=Ar (n≤3) and L=N₂ and H₂O (n=1), and dispersion‐corrected density functional theory calculations (B3LYP−D3/cc‐pVTZ). Three isomers of Ama⁺ generated by electron ionization are identified by the vibrational properties of their rather different NH₂ groups. The ligands bind preferentially to the acidic NH₂ protons, and the strength of the NH…L ionic H‐bonds are probed by the solvation‐induced red‐shifts in the NH stretch modes. The three Ama⁺ isomers include the most abundant canonical cage isomer (I) produced by vertical ionization, which is separated by appreciable barriers from two bicyclic distonic iminium ions obtained from cage‐opening (primary radical II) and subsequent 1,2 H‐shift (tertiary radical III), the latter of which is the global minimum on the Ama⁺ potential energy surface. The effect of solvation on the energetics of the potential energy profile revealed by the calculations is consistent with the observed relative abundance of the three isomers. Comparison to the adamantane cation indicates that substitution of H by the electron‐donating NH₂ group substantially lowers the barriers for the isomerization reaction.

Bottom-Up Evolution of Diamond-Graphite Hybrid Two-Dimensional Nanostructure: Underlying Picture and Electrochemical Activity

The diamond-graphite hybrid thin film with low-dimensional nanostructure (e.g., nitrogen-included ultrananocrystalline diamond (N-UNCD) or the alike), has been employed in many impactful breakthrough applications. However, the detailed picture behind the bottom-up evolution of such intriguing carbon nanostructure is far from clarified yet. Here, the authors clarify it, through the concerted efforts of microscopic, physical, and electrochemical analyses for a series of samples synthesized by hot-filament chemical vapor deposition using methane-hydrogen precursor gas, based on the hydrogen-dependent surface reconstruction of nanodiamond and on the substrate-temperature-dependent variation of the growth species (atomic hydrogen and methyl radical) concentration near substrate. The clarified picture provides insights for a drastic enhancement in the electrochemical activities of the hybrid thin film, concerning the detection of important biomolecule, that is, ascorbic acid, uric acid, and dopamine: their limits of detections are 490, 35, and 25 nm, respectively, which are among the best of the all-carbon thin film electrodes in the literature. This work also enables a simple and effective way of strongly enhancing AA detection.

Infrared Spectrum of the Amantadine Cation: Opening of the Diamondoid Cage upon Ionization

Radical cations of diamondoids, a fundamental class of highly stable cycloalkanes, are intermediates in functionalization reactions and possibly present in the interstellar medium. Herein, we characterize the structure of the radical cation of 1-amantadine (1-C₁₀H₁₅NH₂⁺, Ama⁺), the amino derivative of the parent adamantane (C₁₀H₁₆⁺, Ada⁺), by infrared spectroscopy and density functional theory calculations. The structural isomers of Ama⁺ produced by electron ionization are probed by infrared photodissociation of cold Ar-tagged ions. In addition to the canonical nascent Ama⁺ isomer with an intact C₁₀H₁₅ cage, we identify two distonic bicyclic iminium isomers in which the adamantyl cage opens upon ionization, one of which is lower in energy than the cage isomer. The reaction profile with barriers and intermediates for this cage-opening reaction are determined. Comparison with Ada⁺ suggests that this type of ionization-induced cage-opening may be a common feature for diamondoids and important for their reactivity.

General top-down strategy for generating single-digit nanodiamonds for bioimaging

A variety of techniques exist for synthesizing nanodiamonds. However, it is challenging to produce nanoparticles with a size smaller than 4 nm without aggregation and large volumes of colloidal solutions containing single-digit nanodiamonds. In this study, we demonstrate a facile top-down strategy for the fabrication of monodisperse colloidal fluorescent nanodiamonds with a mean size of 3.6 nm from a suspension of commercial high-pressure and high-temperature diamond microcrystals (raw industrial materials) in an ambient environment using laser ablation in liquids. The formation of colloidal nanodiamonds is ascribed to a mechanism in which diamond microcrystals are first converted into disordered carbon nanoparticles through laser ablation. Subsequently, the amorphous carbon nanoparticles as an intermediate phase are converted into the final nanodiamonds under laser irradiation. Through the in situ covalent linking of ester and ketone groups on the surfaces of the nanodiamonds, tunable, high-performance fluorescence bioimaging can be achieved. The results suggest that single-digit fluorescent nanodiamonds can be generated from colloidal solutions.

Nanodiamonds with powerful ability for drug delivery and biomedical applications: Recent updates on in vivo study and patents

Nanodiamonds are novel nanosized carbon building blocks possessing varied fascinating mechanical, chemical, optical and biological properties, making them significant active moiety carriers for biomedical application. These are known as the most 'captivating' crystals attributed to their chemical inertness and unique properties posing them useful for variety of applications in biomedical era. Alongside, it becomes increasingly important to find, ascertain and circumvent the negative aspects associated with nanodiamonds. Surface modification or functionalization with biological molecules plays a significant role in managing the toxic behavior since nanodiamonds have tailorable surface chemistry. To take advantage of nanodiamond potential in drug delivery, focus has to be laid on its purity, surface chemistry and other considerations which may directly or indirectly affect drug adsorption on nanodiamond and drug release in biological environment. This review emphasizes on the basic properties, synthesis techniques, surface modification techniques, toxicity issues and biomedical applications of nanodiamonds. For the development of nanodiamonds as an effective dosage form, researchers are still engaged in the in-depth study of nanodiamonds and their effect on life interfaces.

A large planetary body inferred from diamond inclusions in a ureilite meteorite

Planetary formation models show that terrestrial planets are formed by the accretion of tens of Moon- to Mars-sized planetary embryos through energetic giant impacts. However, relics of these large proto-planets are yet to be found. Ureilites are one of the main families of achondritic meteorites and their parent body is believed to have been catastrophically disrupted by an impact during the first 10 million years of the solar system. Here we studied a section of the Almahata Sitta ureilite using transmission electron microscopy, where large diamonds were formed at high pressure inside the parent body. We discovered chromite, phosphate, and (Fe,Ni)-sulfide inclusions embedded in diamond. The composition and morphology of the inclusions can only be explained if the formation pressure was higher than 20 GPa. Such pressures suggest that the ureilite parent body was a Mercury- to Mars-sized planetary embryo.

Ureilites are a type of meteorite that are believed to be derived from a parent body that was impacted in the early solar system. Here, the authors analyse inclusions within diamonds from a ureilite meteorite and find that they must have formed at above 20 GPa suggesting the parent body was Mercury- to Mars-sized.

Salt-Assisted Ultrasonicated De-Aggregation and Advanced Redox Electrochemistry of Detonation Nanodiamond

Nanodiamond particles form agglomerates in the dry powder state and this poses limitation to the accessibility of their diamond-like core thus dramatically impacting their technological advancement. In this work, we report de-agglomeration of nanodiamond (ND) by using a facile technique namely, salt-assisted ultrasonic de-agglomeration (SAUD). Utilizing ultrasound energy and ionic salts (sodium chloride and sodium acetate), SAUD is expected to break apart thermally treated nanodiamond aggregates (~50-100 nm) and produce an aqueous slurry of de-aggregated stable colloidal nanodiamond dispersions by virtue of ionic interactions and electrostatic stabilization. Moreover, the SAUD technique neither has toxic chemicals nor is it difficult to remove impurities and therefore the isolated nanodiamonds produced are exceptionally suited for engineered nanocarbon for mechanical (composites, lubricants) and biomedical (bio-labeling, biosensing, bioimaging, theranostic) applications. We characterized the microscopic structure using complementary techniques including transmission electron microscopy combined with selected-area electron diffraction, optical and vibrational spectroscopy. We immobilized SAUD produced NDs on boron-doped diamond electrodes to investigate fundamental electrochemical properties. They included surface potential (or Fermi energy level), carrier density and mapping electrochemical (re)activity using advanced scanning electrochemical microscopy in the presence of a redox-active probe, with the aim of understanding the surface redox chemistry and the interfacial process of isolated nanodiamond particles as opposed to aggregated and untreated nanoparticles. The experimental findings are discussed in terms of stable colloids, quantum confinement and predominantly surface effects, defect sites (sp²-bonded C and unsaturated bonds), inner core (sp³-bonded C)/outer shell (sp²-bonded C) structure, and surface functionality. Moreover, the surface electronic states give rise to midgap states which serve as electron donors (or acceptors) depending upon the bonding (or antibonding). These are important as electroanalytical platforms for various electrocatalytic processes.

Electronic and Optical Properties of Methylated Adamantanes

Recent theoretical work has identified functionalized diamondoids as promising candidates for the tailoring of fluorescent nanomaterials. However, experiments confirming that optical gap tuning can be achieved through functionalization have, up until now, found only systems where fluorescence is quenched. We address this shortcoming by investigating a series of methylated adamantanes. For the first time, a class of functionalized diamondoids is shown to fluoresce in the gas phase. In order to understand the evolution of the optical and electronic structure properties with degree of functionalization, photoelectron spectroscopy was used to map the occupied valence electronic structure, while absorption and fluorescence spectroscopies yielded information about the unoccupied electronic structure and postexcitation relaxation behavior. The resulting spectra were modeled by (time-dependent) density functional theory. These results show that it is possible to overcome fluorescence quenching when functionalizing diamondoids and represent a significant step toward tailoring the electronic structure of these and other semiconductor particles in a manner suitable to applications.

Facile synthesis of mesoporous detonation nanodiamond-modified layers of graphitic carbon nitride as photocatalysts for the hydrogen evolution reaction

The hydrogen evolution reaction (HER) may contribute substantially to energy resources in the future through solar energy conversion.

Nanodiamond-Decorated Silica Spheres as a Chromatographic Material

Nanodiamond (ND) particles (∼5 nm), obtained from detonation soot, were oxidized and/or thermally hydrogenated. Both, the non-hydrogenated and hydrogenated ND particles were successfully coupled to the surface of micrometer-size organo-silica particles. A thin layer of nanodiamonds (NDs) decorating the surface of the organo-silica particles was visible on transmission electron microscopy (TEM) images. X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy (IR) were used to characterize the NDs prior to coupling and to confirm attachment onto the organo-silica particles. Both, ultraviolet (UV) radiation and a chemical initiator were proved to be effective radical initiators for the ND-silica coupling reaction, although for scale-up purposes the chemical initiation was more advantageous to produce the ND-silica composite. Commercially available nanodiamond primary particles were also coupled to the surface of silica particles. The ND-containing silica particles were packed into chromatographic columns to study their initial feasibility as adsorbent material for liquid chromatography. The organo-silica particles decorated with hydrogenated NDs were shown to possess reversed phase type (i.e., hydrophobic) behavior toward the probe compounds, whereas silica particles decorated with the non-hydrogenated NDs showed polar (i.e., hydrophilic) interactions, both under liquid chromatographic conditions.

Enhanced oscillatory rectification and negative differential resistance in pentamantane diamondoid-cumulene systems

We propose a new functionality for diamondoids in nanoelectronics. Based on the nonequilibrium Green's function formalism and density functional theory, we reveal that when attached to gold electrodes, the pentamantane-cumulene molecular junction exhibits large and oscillatory rectification and negative differential resistance (NDR) - depending on the number of carbon atoms in cumulene (Cn). When n is odd rectification is greatly enhanced where the rectification ratio can reach ∼180 and a large negative differential resistance peak current of ∼3 μA. This oscillatory behavior is well rationalised in terms of the occupancy of the carbon 2p states in Cn. Interestingly, different layers of C atoms in the pentamantane molecule have different contributions to transmission. The first and third layers of C atoms in pentamantane have a slight contribution to rectification, and the fifth and sixth layers have a stronger contribution to both rectification and NDR. Thus, our results suggest potential avenues for controlling their functions by chemically manipulating various parts of the diamondoid molecule, thus extending the applications of diamondoids in nanoscale integrated circuits.

Challenges in modelling nanoparticles for drug delivery

Although there have been significant advances in the fields of theoretical condensed matter and computational physics, when confronted with the complexity and diversity of nanoparticles available in conventional laboratories a number of modeling challenges remain. These challenges are generally shared among application domains, but the impacts of the limitations and approximations we make to overcome them (or circumvent them) can be more significant one area than another. In the case of nanoparticles for drug delivery applications some immediate challenges include the incompatibility of length-scales, our ability to model weak interactions and solvation, the complexity of the thermochemical environment surrounding the nanoparticles, and the role of polydispersivity in determining properties and performance. Some of these challenges can be met with existing technologies, others with emerging technologies including the data-driven sciences; some others require new methods to be developed. In this article we will briefly review some simple methods and techniques that can be applied to these (and other) challenges, and demonstrate some results using nanodiamond-based drug delivery platforms as an exemplar.

Improving surface and defect center chemistry of fluorescent nanodiamonds for imaging purposes--a review

Diamonds are widely used for jewelry owing to their superior optical properties accounting for their fascinating beauty. Beyond the sparkle, diamond is highly investigated in materials science for its remarkable properties. Recently, fluorescent defects in diamond, particularly the negatively charged nitrogen-vacancy (NV(-)) center, have gained much attention: The NV(-) center emits stable, nonbleaching fluorescence, and thus could be utilized in biolabeling, as a light source, or as a Förster resonance energy transfer donor. Even more remarkable are its spin properties: with the fluorescence intensity of the NV(-) center reacting to the presence of small magnetic fields, it can be utilized as a sensor for magnetic fields as small as the field of a single electron spin. However, a reproducible defect and surface and defect chemistry are crucial to all applications. In this article we review methods for using nanodiamonds for different imaging purposes. The article covers (1) dispersion of particles, (2) surface cleaning, (3) particle size selection and reduction, (4) defect properties, and (5) functionalization and attachment to nanostructures, e.g., scanning probe microscopy tips.

Science and engineering of nanodiamond particle surfaces for biological applications (Review)

Diamond has outstanding bulk properties such as super hardness, chemical inertness, biocompatibility, luminescence, to name just a few. In the nanoworld, in order to exploit these outstanding bulk properties, the surfaces of nanodiamond (ND) particles must be accordingly engineered for specific applications. Modification of functional groups on the ND's surface and the corresponding electrostatic properties determine their colloidal stability in solvents, formation of photonic crystals, controlled adsorption and release of cargo molecules, conjugation with biomolecules and polymers, and cellular uptake. The optical activity of the luminescent color centers in NDs depends on their proximity to the ND's surface and surface termination. In order to engineer the ND surface, a fundamental understanding of the specific structural features and sp(3)-sp(2) phase transformations on the surface of ND particles is required. In the case of ND particles produced by detonation of carbon containing explosives (detonation ND), it should also be taken into account that its structure depends on the synthesis parameters and subsequent processing. Thus, for development of a strategy of surface modification of detonation ND, it is imperative to know details of its production. In this review, the authors discuss ND particles structure, strategies for surface modification, electrokinetic properties of NDs in suspensions, and conclude with a brief overview of the relevant bioapplications.

Nanodiamonds from coal under ambient conditions

Coal is the most abundant energy resource, but it is only useful for producing energy via combustion due to its structural characteristics. However, coal is also inexpensive and is the most plentiful and readily available carbon source material for the production of nanodiamonds compared with the most widely used solid carbon source, high-purity graphite, and the high-purity hydrocarbon gas precursor, methane. Here, we report a simple and green top-down strategy for synthesizing nanodiamonds with a cubic phase and a mean size of 3 nm from various types of coal at atmospheric pressure and room temperature using a novel process involving laser ablation in liquid. Furthermore, we have systematically studied the process of phase transformation from coal to nanodiamonds using nucleation thermodynamics, growth kinetics and structural stability. The synthesized nanodiamonds have turned out to be soluble monodisperse colloids that exhibit strong and stable fluorescence both in alcohol and in water. These results provide a route for producing nanodiamonds from inexpensive and abundant coal.

Nanodiamonds for field emission: state of the art

The aim of this review is to highlight the recent advances and the main remaining challenges related to the issue of electron field emission (FE) from nanodiamonds. The roadmap for FE vacuum microelectronic devices envisages that nanodiamonds could become very important in a short time. The intrinsic properties of the nanodiamond materials indeed meet many of the requirements of cutting-edge technologies and further benefits can be obtained by tailored improvements of processing methodologies. The current strategies used to modulate the morphological and structural features of diamond to produce highly performing emitting systems are reported and discussed. The focus is on the current understanding of the FE process from nanodiamond-based materials and on the major concepts used to improve their performance. A short survey of non-conventional microsized cold cathodes based on nanodiamonds is also reported.

Nanodiamonds and silicon quantum dots: ultrastable and biocompatible luminescent nanoprobes for long-term bioimaging

Ultra-stability and low-toxicity of silicon quantum dots and fluorescent nanodiamonds for long-termin vitroandin vivobioimaging are demonstrated.

A new phase transformation path from nanodiamond to new-diamond via an intermediate carbon onion

The investigation of carbon allotropes such as graphite, diamond, fullerenes, nanotubes and carbon onions and mechanisms that underlie their mutual phase transformation is a long-standing problem of great fundamental importance. New diamond (n-diamond) is a novel metastable phase of carbon with a face-centered cubic structure; it is called "new diamond" because many reflections in its electron diffraction pattern are similar to those of diamond. However, producing n-diamond from raw carbon materials has so far been challenging due to n-diamond's higher formation energy than that of diamond. Here, we, for the first time, demonstrate a new phase transformation path from nanodiamond to n-diamond via an intermediate carbon onion in the unique process of laser ablation in water, and establish that water plays a crucial role in the formation of n-diamond. When a laser irradiates colloidal suspensions of nanodiamonds at ambient pressure and room temperature, nanodiamonds are first transformed into carbon onions serving as an intermediate phase, and sequentially carbon onions are transformed into n-diamonds driven by the laser-induced high temperature and high pressure from the carbon onion as a nanoscaled temperature and pressure cell upon the process of laser irradiation in a liquid. This phase transformation not only provides new insight into the physical mechanism involved, but also offers one suitable opportunity for breaking controllable pathways between n-diamond and carbon allotropes such as diamond and carbon onions.

Framed carbon nanostructures: synthesis and applications in functional SPM tips

We present a synthesis method to fabricate framed carbon-based nanostructures having highly anisotropic shapes, in particular, the nanofork and nanoscalpel structures which are obtained systematically under optimized growth conditions. A theoretical model is developed to explain the formation of such nanostructures on Si cantilevers and W etched wires exposed to a focused electron beam. We then demonstrate the potentials of these nanostructures as functional tips for scanning probe microscopy. Owing to their anisotropic shapes, such tips can be very useful for nanolithography, nanosurgery of biological objects, and precise manipulation with surface particles. Overall, our method provides a simple and robust way to produce functional scanning probe microscopy tips with variable shapes and enhanced capabilities for different applications compared to standard cantilevers.

Fabrication of nitrogen-modified annealed nanodiamond with improved catalytic activity

Annealed ultradispersed nanodiamond (ADD) with sp(2) curved concentric graphitic shells is an interesting hybrid material consisting of the remarkable surface properties of graphene-based nanomaterials and the intrinsic properties of a diamond core. In this case, based on its specific properties and surface oxygen functional groups, nitrogen-modified ADD powders have been tunably synthesized via three different preparation methods in a calcination treatment process. The detailed formation and dynamic behaviors of the nitrogen species on the modified ADD during the preparation process are revealed by elemental analysis, X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption. Moreover, we study the catalytic performance on the metal-free nitrogen-modified ADD catalysts by means of selective oxidation of benzylic alcohols as a probe reaction. The results indicate that the modified ADD catalysts exhibit a higher catalytic activity than pristine ADD. By correlating XPS data with catalytic measurements, we conclude that the pyridinic nitrogen species plays a pivotal role in the catalytic reaction. Our work provides valuable information on the design of modified carbon materials with more excellent properties.

Reversible nanodiamond-carbon onion phase transformations

Because of their considerable science and technical interest, nanodiamonds (3-5 nm) are often used as a model to study the phase transformation between graphite and diamond. Here we demonstrated that a reversible nanodiamond-carbon onion phase transformation can become true when laser irradiates colloidal suspensions of nanodiamonds at the ambient temperature and pressure. Nanodiamonds are first transformed to carbon onions driven by the laser-induced high temperature in which an intermediary bucky diamond phase is observed. Sequentially, carbon onions are transformed back to nanodiamonds driven by the laser-induced high temperature and high pressure from carbon onions as nanoscaled temperature and pressure cell upon the laser irradiation process in liquid. Similarly, the same bucky diamond phase serving as an intermediate phase is found during the carbon onion-to-nanodiamond transition. To have a clear insight into the unique phase transformation the thermodynamic approaches on the nanoscale were proposed to elucidate the reversible phase transformation of nanodiamond-to-carbon onion-to-nanodiamond via an intermediary bucky diamond phase upon the laser irradiation in liquid. This reversible transition reveals a series of phase transformations between diamond and carbon allotropes, such as carbon onion and bucky diamond, having a general insight into the basic physics involved in these phase transformations. These results give a clue to the root of meteoritic nanodiamonds that are commonly found in primitive meteorites but their origin is puzzling and offers one suitable approach for breaking controllable pathways between diamond and carbon allotropes.

Formation of nanodiamonds at near-ambient conditions via microplasma dissociation of ethanol vapour

Clusters of diamond-phase carbon, known as nanodiamonds, exhibit novel mechanical, optical and biological properties that have elicited interest for a wide range of technological applications. Although diamond is predicted to be more stable than graphite at the nanoscale, extreme environments are typically used to produce nanodiamonds. Here we show that nanodiamonds can be stably formed in the gas phase at atmospheric pressure and neutral gas temperatures <100 °C by dissociation of ethanol vapour in a novel microplasma process. Addition of hydrogen gas to the process allows in flight purification by selective etching of the non-diamond carbon and stabilization of the nanodiamonds. The nanodiamond particles are predominantly between 2 and 5 nm in diameter, and exhibit cubic diamond, n-diamond and lonsdaleite crystal structures, similar to nanodiamonds recovered from meteoritic residues. These results may help explain the origin of nanodiamonds in the cosmos, and offer a simple and inexpensive route for the production of high-purity nanodiamonds.

Size Effect on the Transformation from Graphite to Nanodiamonds

The synthesis of nanodiamonds by pulsed-laser ablation in liquid (PLAL) is an attractive research field in developing well-dispersed fluorescent nanodiamonds for bioimaging and life science. However, nanodiamonds are quite different from their widely pursued carbon allotropes both in synthesis conditions and physical properties. It is a great challenge to synthesize metastable phase nanodiamonds that prefer high temperature and high pressure. Despite the progress in the synthesis of nanodiamond by pulsed-laser ablation of graphite target using different laser power densities under room conditions, the transformation from graphite to nanodiamonds are not yet well explained. In order to have a better understanding to the formation of metastable nanodiamonds upon PLAL, the formation of nanodiamond has been elucidated from both the aspects of thermodynamics and kinetics. Due to low laser intensity and long wavelength, synthesis of nanodiamonds is the result of high cooling velocity of high-pressure and high-temperature carbon vapor condensation formed under laser vaporization of graphite particles. When diamond nuclei grow into the right size, they cannot increase and the graphite nucleation begins to form and grow on the diamond at given conditions due to long pulse width for ms-pulsed laser. In fact, the diamond particles enwrapped several layers of graphite have obtained. Moreover, the reasons related 3~6nm diamonds prepared by this new process and having narrow size distribution are also discussed.

Local detection of nitrogen-vacancy centers in a nanodiamond monolayer

Nitrogen-vacancy defect centers (NV) contained in nanodiamonds (NDs) are a promising candidate in quantum information processing and single photon sources due to the capability of controlling their assembly on various surfaces. However, their detection with traditional optical techniques becomes challenging when probing high NV densities at the nanometer scale. Here, we combine scanning probe techniques to characterize in a monolayer the structural and electronic properties of bucky-diamonds with sizes below 10 nm. We further observe by light-assisted Kelvin- and scanning tunneling spectroscopy a clear signature of negatively charged subsurface NV centers in NDs at the nanoscale where conventional techniques are limited.

Understanding ultrafine nanodiamond formation using nanostructured explosives

The detonation process is able to build new materials with a bottom-up approach. Diamond, the hardest material on earth, can be synthesized in this way. This unconventional synthesis route is possible due to the presence of carbon inside the high-explosive molecules: firing high-explosive mixtures with a negative oxygen balance in a non-oxidative environment leads to the formation of nanodiamond particles. Trinitrotoluene (TNT) and hexogen (RDX) are the explosives primarily used to synthesize nanodiamonds. Here we show that the use of nanostructured explosive charges leads to the formation of smaller detonation nanodiamonds, and it also provides new understanding of nanodiamond formation-mechanisms. The discontinuity of the explosive at the nanoscale level plays the key role in modifying the diamond particle size, and therefore varying the size with microstructured charges is impossible.

Modeling polydispersive ensembles of diamond nanoparticles

While significant progress has been made toward production of monodispersed samples of a variety of nanoparticles, in cases such as diamond nanoparticles (nanodiamonds) a significant degree of polydispersivity persists, so scaling-up of laboratory applications to industrial levels has its challenges. In many cases, however, monodispersivity is not essential for reliable application, provided that the inevitable uncertainties are just as predictable as the functional properties. As computational methods of materials design are becoming more widespread, there is a growing need for robust methods for modeling ensembles of nanoparticles, that capture the structural complexity characteristic of real specimens. In this paper we present a simple statistical approach to modeling of ensembles of nanoparticles, and apply it to nanodiamond, based on sets of individual simulations that have been carefully selected to describe specific structural sources that are responsible for scattering of fundamental properties, and that are typically difficult to eliminate experimentally. For the purposes of demonstration we show how scattering in the Fermi energy and the electronic band gap are related to different structural variations (sources), and how these results can be combined strategically to yield statistically significant predictions of the properties of an entire ensemble of nanodiamonds, rather than merely one individual 'model' particle or a non-representative sub-set.

Oxygen hole doping of nanodiamond

Surface-graphitized nanodiamonds (NDs) are promising hybrid nanomaterials which appear to combine core properties of diamond with surface properties of graphene-based materials. Here we demonstrate that NDs covered by graphene islands, so-called Fullerene-Like Reconstructions (FLRs), are sensitive to hole doping by molecular oxygen in water. NDs covered by FLRs (NDs-FLRs) are prepared by annealing under vacuum of detonation NDs at 750 °C. We propose that oxygen hole doping is promoted on FLRs due to a unique electronic interaction between the diamond core and the outer graphene layer. As a consequence, NDs-FLRs exhibit positive zeta potential in water, unlike NDs surrounded by several graphitic layers. Surface hole-doped NDs may be promising nanomaterials for new electronic and biomedical applications.

Surface electrostatic potential transformation of nanodiamond induced by graphitization

The surface electrostatic potential of raw nanodiamonds is implied to be altered permanently during in the spontaneously occurred graphitization process by recent reports. With all-electron ab initio density functional theory methods, the intrinsic effect of graphitization on the electrostatic potential of nanodiamonds is investigated. It is exposed that while the graphitization process goes on, the dangling bonds on the (111) surface transfer into the inner side and subsequently the surface potential changes from negative to positive. Our results may be of great help in understanding the various electrostatic properties of nanodiamonds.

The properties and applications of nanodiamonds

Nanodiamonds have excellent mechanical and optical properties, high surface areas and tunable surface structures. They are also non-toxic, which makes them well suited to biomedical applications. Here we review the synthesis, structure, properties, surface chemistry and phase transformations of individual nanodiamonds and clusters of nanodiamonds. In particular we discuss the rational control of the mechanical, chemical, electronic and optical properties of nanodiamonds through surface doping, interior doping and the introduction of functional groups. These little gems have a wide range of potential applications in tribology, drug delivery, bioimaging and tissue engineering, and also as protein mimics and a filler material for nanocomposites.

Solid state NMR study of nanodiamond surface chemistry

Solid state NMR measurements using 13C, 1H and 19F nuclei (MAS, CP-MAS) underline the surface chemistry of nanodiamonds from different synthesis (detonation, high pressure high temperature and shock compression). The comparison of the spin-lattice relaxation times T1 and physicochemical characterization (spin densities of dangling bonds, specific surface area and Raman and infrared spectroscopies) for the various samples, as synthesized, chemically purified and fluorinated allows the nature and the location of the various groups, mainly C-OH, C-H and C-F to be investigated. C-OH groups are located only on the surface whereas C-H and dangling bonds seem to be distributed in the whole volume. Fluorination was studied as a chemical treatment for purification and change of the hydrophobicity through the conversion of the C-OH groups into covalent C-F bonds.