Computational high-throughput screening of electrocatalytic materials for hydrogen evolution

Correlation between existential form of ruthenium cocatalyst and photocatalytic hydrogen evolution of carbon nitride

Catalysts composed of nanocluster and single-atom (SA) were extensively used to enhance electrocatalytic water splitting performance, whereas study of their photocatalytic hydrogen (H2) evolution activity was limited. Herein, carbon nitride (CN) decorated by ruthenium (Ru) cocatalysts existed as SA + cluster, cluster + nanoparticles (NPs), and NPs were prepared by impregnation and calcination processes. The correlation between existential form, content of Ru cocatalyst and H2 evolution rate were carefully discussed. It was found that Ru NPs were favor for water molecule adsorption, whereas Ru SAs and clusters facilitated H2 desorption. Theoretical calculations revealed that Ru clusters + NPs cocatalyst were beneficial for H* intermediate formation. Water splitting tests found that 1.07 wt% Ru NPs + cluster modified CN showed the highest H2 evolution rate of 13.64 mmol h-1 g-1, which was 266.4 and 1.5 times higher than those of CN and Ru NPs (2.33 wt%) decorated CN, respectively. This work deeply reveals the influences of existential form of Ru cocatalysts on photocatalytic water splitting of CN, and provides thought in designing new cocatalysts to largely enhance H2 evolution.

Structure-Function Relationship of p-Block Bismuth for Selective Photocatalytic CO2 Reduction

Selective photocatalytic reduction of CO2 to value-added fuels, such as CH4, is highly desirable due to its high mass-energy density. Nevertheless, achieving selective CH4 with higher production yield on p-block materials is hindered by non-ideal adsorption of *CHO key intermediate and an unclear structure-function relationship. Herein, we unlock the key reaction steps of CO2 and found a volcano-type structure-function relationship for photocatalytic CO2-to-CH4 conversion by gradual reduction of the p-band center of the p-block Bi element leading to formation of Bi-oxygen vacancy heterosites. The selectivity of CH4 is also positive correlation with adsorption energy of *CHO. The Bi-oxygen vacancy heterosites with an appropriate filled Bi-6p orbital electrons and p band center (-0.64) enhance the coupling between C-2p of *CHO and Bi-6p orbitals, thereby resulting in high selectivity (95.2 %) and productivity (17.4 μmol g-1 h-1) towards CH4. Further studies indicate that the synergistic effect between Bi-oxygen vacancy heterosites reduces Gibbs free energy for *CO-*CHO process, activates the C-H and C=O bonds of *CHO, and facilitates the enrichment of photoexcited electrons at active sites for multielectron photocatalytic CO2-to-CH4 conversion. This work provides a new perspective on developing p-block elements for selective photocatalytic CO2 conversion.

Homologous Temperature Regulated Hierarchical Nanoporous Structures by Dealloying

Nanoporous metals, fabricated via dealloying, offer versatile applications but are typically limited to unimodal porous structures, which hinders the integration of conflicting pore-size-dependent properties. A strategy is presented that exploits the homologous temperature (TH)-dependent scaling of feature sizes to generate hierarchical porous structures through multistep dealloying at varied TH levels, adjusted by altering dealloying temperatures or the material melting points. This technique facilitates the creation of monolithic architectures of bimodal porous nickel and trimodal porous carbon, each characterized by well-defined, self-similar bicontinuous porosities across distinct length scales. These materials merge extensive surface area with efficient mass transport, showing improved current delivery and rate capabilities as electrodes in electrocatalytic hydrogen production and electrochemical supercapacitors. These results highlight TH as a unifying parameter for precisely tailoring feature sizes of dealloyed nanoporous materials, opening avenues for developing materials with hierarchical structures that enable novel functionalities.

Modeling Heterogeneous Catalysis and Electrocatalysis

With this special collection of articles with contributions from friends, former colleagues, collaborators, students, and postdocs, we celebrate Jens K. Nørskov′s belated 70th birthday. The studies reported here highlight just a small portion of the breadth and depth of Jens Nørskov's 40 years of influence in modeling heterogeneous catalysis and electrocatalysis. Many challenges remain in enabling in silico catalyst design, and the contributions in this special collection highlight the growing importance of machine learning approaches towards solving these challenges.

Recent Advances in Revealing the Electrocatalytic Mechanism for Hydrogen Energy Conversion System

In light of the intensifying global energy crisis and the mounting demand for environmental protection, it is of vital importance to develop advanced hydrogen energy conversion systems. Electrolysis cells for hydrogen production and fuel cell devices for hydrogen utilization are indispensable in hydrogen energy conversion. As one of the electrolysis cells, water splitting involves two electrochemical reactions, hydrogen evolution reaction and oxygen evolution reaction. And oxygen reduction reaction coupled with hydrogen oxidation reaction, represent the core electrocatalytic reactions in fuel cell devices. However, the inherent complexity and the lack of a clear understanding of the structure-performance relationship of these electrocatalytic reactions, have posed significant challenges to the advancement of research in this field. In this work, the recent development in revealing the mechanism of electrocatalytic reactions in hydrogen energy conversion systems is reviewed, including in situ characterization and theoretical calculation. First, the working principles and applications of operando measurements in unveiling the reaction mechanism are systematically introduced. Then the application of theoretical calculations in the design of catalysts and the investigation of the reaction mechanism are discussed. Furthermore, the challenges and opportunities are also summarized and discussed for paving the development of hydrogen energy conversion systems.

A catalyst family of high-entropy alloy atomic layers with square atomic arrangements comprising iron- and platinum-group metals

We report a catalyst family of high-entropy alloy (HEA) atomic layers having three elements from iron-group metals (IGMs) and two elements from platinum-group metals (PGMs). Ten distinct quinary compositions of IGM-PGM-HEA with precisely controlled square atomic arrangements are used to explore their impact on hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR). The PtRuFeCoNi atomic layers perform enhanced catalytic activity and durability toward HER and HOR when benchmarked against the other IGM-PGM-HEA and commercial Pt/C catalysts. Operando synchrotron x-ray absorption spectroscopy and density functional theory simulations confirm the cocktail effect arising from the multielement composition. This effect optimizes hydrogen-adsorption free energy and contributes to the remarkable catalytic activity observed in PtRuFeCoNi. In situ electron microscopy captures the phase transformation of metastable PtRuFeCoNi during the annealing process. They transform from random atomic mixing (25°C), to ordered L10 (300°C) and L12 (400°C) intermetallic, and finally phase-separated states (500°C).

Engineered Two-Dimensional Transition Metal Dichalcogenides for Energy Conversion and Storage

Designing efficient and cost-effective materials is pivotal to solving the key scientific and technological challenges at the interface of energy, environment, and sustainability for achieving NetZero. Two-dimensional transition metal dichalcogenides (2D TMDs) represent a unique class of materials that have catered to a myriad of energy conversion and storage (ECS) applications. Their uniqueness arises from their ultra-thin nature, high fractions of atoms residing on surfaces, rich chemical compositions featuring diverse metals and chalcogens, and remarkable tunability across multiple length scales. Specifically, the rich electronic/electrical, optical, and thermal properties of 2D TMDs have been widely exploited for electrochemical energy conversion (e.g., electrocatalytic water splitting), and storage (e.g., anodes in alkali ion batteries and supercapacitors), photocatalysis, photovoltaic devices, and thermoelectric applications. Furthermore, their properties and performances can be greatly boosted by judicious structural and chemical tuning through phase, size, composition, defect, dopant, topological, and heterostructure engineering. The challenge, however, is to design and control such engineering levers, optimally and specifically, to maximize performance outcomes for targeted applications. In this review we discuss, highlight, and provide insights on the significant advancements and ongoing research directions in the design and engineering approaches of 2D TMDs for improving their performance and potential in ECS applications.

Carbonized wood fiber-supported S, N-codoped carbon layer-coated multinary metal sulfide nanoarchitecture for efficient oxygen evolution reaction at ampere-level current density

Multinary metal sulfides (MMSs) are highly suitable candidates for the application of electrocatalysis as they offer numerous parameters for optimizing the electronic structure and catalytic sites. Herein, a stable nanoarchitecture consisting of MMSs ((NiCoCrMnFe)Sx) nanoparticles embedded in S, N-codoped carbon (SNC) layers derived from metal organic framework (MOF) and supported on carbonized wood fibers (CWF) was fabricated by directly carbonization. Benefiting from this carbon-coated configuration, along with the synergistic effects within multinary metal systems, (NiCoCrMnFe)Sx@SNC/CWF delivers an exceptionally low overpotential of 260 mV at a high current density of 1000 mA cm-2, a small Tafel slope of 48.5 mV dec-1, and robust electrocatalytic stability. Furthermore, the (NiCoCrMnFe)Sx@SNC/CWF used as the cathode of rechargeable Zn-air batteries demonstrates higher power density and remarkable durability, surpassing that of commercial RuO2. Thus, we showcase the feasibility and advantages of employing highly efficient and durable MMSs materials for low-cost and sustainable energy conversion.

Structure- and Morphology-Controlled Synthesis of Hexagonal Ni2-x Zn x P Nanocrystals and Their Composition-Dependent Electrocatalytic Activity for Hydrogen Evolution Reaction

Nickel phosphides are an emerging class of earth-abundant catalysts for hydrogen generation through water electrolysis. However, the hydrogen evolution reaction (HER) activity of Ni2P is lower than that of benchmark Pt group catalysts. To address this limitation, an integrated theoretical and experimental study was performed to enhance the HER activity and stability of hexagonal Ni2P through doping with synergistic transition metals. Among the nine dopants computationally studied, zinc emerged as an ideal candidate due to its ability to modulate the hydrogen binding free energy (ΔG H) closer to a thermoneutral value. Consequently, phase pure hexagonal Ni2-x Zn x P nanocrystals (NCs) with a solid spherical morphology, variable compositions (x = 0-17.14%), and size in the range of 6.8 ± 1.1-9.1 ± 1.1 nm were colloidally synthesized to investigate the HER activity and stability in alkaline electrolytes. As predicted, the HER performance was observed to be composition-dependent with Zn compositions (x) of 0.03, 0.07, and 0.15 demonstrating superior activity with overpotentials (η-10) of 188.67, 170.01, and 135.35 mV, respectively at a current density of -10 mA/cm2, in comparison to Ni2P NCs (216.2 ± 4.4 mV). Conversely, Ni2-x Zn x P NCs with x = 0.01, 0.38, 0.44, and 0.50 compositions showed a notable decrease in HER activity, with corresponding η-10 of 225.3 ± 3.2, 269.9 ± 4.3, 276.4 ± 3.7 and 263.9 ± 4.9 mV, respectively. The highest HER active catalyst was determined to be Ni1.85Zn0.15P NCs, featuring a Zn concentration of 5.24%, consistent with composition-dependent ΔG H calculations. The highest performing Ni1.85Zn0.15P NCs displayed a Heyrovsky HER mechanism, enhanced kinetics and electrochemically active surface area (ECSA), and superior corrosion tolerance with a negligible increase of η-10 after 10 h of continuous HER. This study provides critical insights into enhancing the performance of metal phosphides through doping-induced electronic structure variation, paving the way for the design of high-efficiency and durable nanostructures for heterogeneous catalytic studies.

Ruthenium Nanoclusters and Single Atoms on α-MoC/N-Doped Carbon Achieves Low-Input/Input-Free Hydrogen Evolution via Decoupled/Coupled Hydrazine Oxidation

The hydrazine oxidation-assisted H2 evolution method promises low-input and input-free hydrogen production. However, developing high-performance catalysts for hydrazine oxidation (HzOR) and hydrogen evolution (HER) is challenging. Here, we introduce a bifunctional electrocatalyst α-MoC/N-C/RuNSA, merging ruthenium (Ru) nanoclusters (NCs) and single atoms (SA) into cubic α-MoC nanoparticles-decorated N-doped carbon (α-MoC/N-C) nanowires, through electrodeposition. The composite showcases exceptional activity for both HzOR and HER, requiring -80 mV and -9 mV respectively to reach 10 mA cm-2. Theoretical and experimental insights confirm the importance of two Ru species for bifunctionality: NCs enhance the conductivity, and its coexistence with SA balances the H ad/desorption for HER and facilitates the initial dehydrogenation during the HzOR. In the overall hydrazine splitting (OHzS) system, α-MoC/N-C/RuNSA excels as both anode and cathode materials, achieving 10 mA cm-2 at just 64 mV. The zinc hydrazine (Zn-Hz) battery assembled with α-MoC/N-C/RuNSA cathode and Zn foil anode can exhibit 97.3 % energy efficiency, as well as temporary separation of hydrogen gas during the discharge process. Therefore, integrating Zn-Hz with OHzS system enables self-powered H2 evolution, even in hydrazine sewage. Overall, the amalgamation of NCs with SA achieves diverse catalytic activities for yielding multifold hydrogen gas through advanced cell-integrated-electrolyzer system.

Zeolite-Templated Carbons Supported Rh and Ru Electrocatalysts for Highly Active Hydrogen Evolution Reaction

Here, we report the systematical synthesis of zeolite-templated carbon (ZTC) supported Ru and Rh mono- or bi-metallic electrocatalysts towards hydrogen evolution reaction (HER). The zeolite A or ZSM-5 derived ZTC supports and metal sites were adjusted, and all electrocatalysts outperformed the commercial Pt/C electrocatalyst for HER performance. In particular, the RhRu/(ZTC/ZSM5) sample exhibited superior catalytic performance with the overpotential of 24.8 mV@10 mA ⋅ cm-2, and outstanding stability with 1 mV drop after 20000 cyclic voltammetry circles. This work offers a simple impregnation method for the synthesis of highly performed HER electrocatalysts supported on porous zeolite-templated carbon.

Hydrogen Adsorption on Ordered and Disordered Pt-Fe and Pt-Co Alloys

The bulk properties and surface chemical reactivity of compositionally disordered Pt-Fe and Pt-Co alloys in the fcc A1 phase have been investigated theoretically in comparison to the ordered alloys of the same compositions. The results are analyzed together with our previously reported findings for Pt-Ni. Nonlinear variation is observed in lattice constant, d band center, magnetic moment, and hydrogen adsorption energy across the composition range (0-100 atomic % of Pt, x Pt). The Pt 5d states are strongly perturbed by the 3d states of the base metals, leading to notable density of states above the Fermi level and residual magnetic moments at high x Pt. Surface reactivity in terms of average H adsorption energy varies continuously with composition between the monometallic Fe-Pt and Co-Pt limits, going through a maximum around x Pt = 0.5-0.75. Close inspection reveals a significant variation in site reactivity at x Pt < 0.75, particularly with disordered Pt-Fe alloys due in part to the inherent disparity in chemical reactivity between Fe and Pt. Furthermore, the strong interaction between Fe and Pt causes Pt-rich sites to be less reactive toward H than Pt-rich sites on disordered Pt-Ni alloy surfaces, despite less compressive strain caused. These results provide theoretical underpinnings for conceptualizing and understanding the performance of these Pt-base metal alloys in key catalytic applications and for efforts to tailor Pt-alloys as catalysts.

Applicability of the d-Band Model to Predict the Influence of Elastic Strains on the Adsorption Energy of Different Adsorbates onto Pt and PtO2 Surfaces

The influence of elastic strains on the adsorption processes of seven adsorbates (H, C, N, O, CO, NO, and H) onto the surface of Pt(111) and PtO2 (110) has been investigated using density functional theory (DFT) simulations. The total adsorption energy was decomposed into mechanical and electronic contributions. Our results indicate that elastic strain in metals affects the adsorption energy by modifying the electronic structure of the surface rather than changing the physical space where the atoms reside after adsorption. In fact, the mechanical contribution to the adsorption energy in Pt was negligible compared to the electronic interaction and independent of the deformation. The mechanical contribution in the case of PtO2 was also independent of the applied strain, but its magnitude was slightly higher due to the ionic bonding between Pt and O atoms in the slab. The variation of the electronic contribution to the adsorption energy in Pt and PtO2 followed the predictions of the d-band model for all adsorbates, expanding its applicability to different adsorbates onto the same surface and to oxides.

In Situ Hydroxide Growth over Nickel-Iron Phosphide with Enhanced Overall Water Splitting Performances

In this work, three dimensional (3D) self-supported Ni-FeOH@Ni-FeP needle arrays with core-shell heterojunction structure are fabricated via in situ hydroxide growth over Ni-FeP surface. The as-prepared electrodes show an outstanding oxygen evolution reaction (OER) performance, only requiring the low overpotential of 232 mV to reach 200 mA cm-2 with the Tafel slop of 40 mV dec-1. For overall water splitting, an alkaline electrolyzer with these electrodes only requires a cell voltage of 2.14 V to reach 1 A cm-2. Mechanistic investigations for such excellent electrocatalytic performances are utilized by in situ Raman spectroscopy in conjunction with density functional theory (DFT) calculations. The computation results present that Ni-FeOH@Ni-FeP attains better intrinsic conductivity and the D-band center (close to that of the ideal catalyst), thus giving superior excellent catalytic performances. Likewise, the surface Ni-FeOH layer can improve the structural stability of Ni-FeP cores and attenuate the eventual formation of irreversible FeOOH products. More importantly, the appearance of FeOOH intermediates can effectively decrease the energy barrier of NiOOH intermediates, and then rapidly accelerate the sluggish reaction dynamics, as well as further enhance the electrocatalytic activities, reversibility and cycling stability.

Ab initio molecular dynamics investigation of the Pt(111)-water interface structure in an alkaline environment with high surface OH-coverages

In this study, we investigate the structure of the Pt(111)-water interface in an alkaline environment with large OH coverages of 1/3, 2/3 and 1 monolayer using a large well-equilibrated system. We observe that the OH coverage influences both the orientational distribution of the water molecules and their density, with more structure associated with higher coverage. At the same time, there is evidence of a highly dynamic hydrogen bond network on the lower coverage systems with substantial exchange of water between the surface and the solvent. In addition to OH and H2O species, which are preferentially located at the top sites, the 1/3 and 2/3 monolayer surfaces also contain O atoms, which are relatively stable and prefer the hollow sites. In contrast, the 1 monolayer surface shows none of these dynamics, and is unlikely to be active. The dynamic coexistence of O, OH and H2O on Pt(111) electrodes in alkaline conditions necessitates the investigation of several possible reaction paths for processess like ORR and water splitting. Finally, the exchange processes observed between the solvent and the interface underscore the need to explicitly include liquid water in simulations of systems similar to Pt(111).

Surface Segregation Studies in Ternary Noble Metal Alloys: Comparing DFT and Machine Learning with Experimental Data

Surface segregation, whereby the surface composition of an alloy differs systematically from the bulk, has historically been hard to study, because it requires experimental and modeling methods that span alloy composition space. In this work, we study surface segregation in catalytically relevant noble and platinum-group metal alloys with a focus on three ternary systems: AgAuCu, AuCuPd, and CuPdPt. We develop a data set of 2478 fcc slabs with those compositions including all three low-index crystallographic orientations relaxed with Density Functional Theory using the PBEsol functional with D3 dispersion corrections. We fine-tune a machine learning model on this data and use the model in a series of 1800 Monte Carlo simulations spanning ternary composition space for each surface orientation and ternary chemical system. The results of these simulations are validated against prior experimental surface segregation data collected using composition spread alloy films for AgAuCu and AuCuPd. Our findings reveal that simulations conducted using the (110) orientation most closely match experimentally observed surface segregation trends, and while predicted trends qualitatively match observation, biases in the PBEsol functional limit numeric accuracy. This study advances understanding of surface segregation and the utility of computational studies and highlights the need for further improvements in simulation accuracy.

Unlocking the Potential of High Entropy Alloys in Electrochemical Water Splitting: A Review

The global pursuit of sustainable energy is focused on producing hydrogen through electrocatalysis driven by renewable energy. Recently, High entropy alloys (HEAs) have taken the spotlight in electrolysis due to their intriguing cocktail effect, broad design space, customizable electronic structure, and entropy stabilization effect. The tunability and complexity of HEAs allow a diverse range of active sites, optimizing adsorption strength and activity for electrochemical water splitting. This review comprehensively covers contemporary advancements in synthesis technique, design framework, and physio-chemical evaluation approaches for HEA-based electrocatalysts. Additionally, it explores design principles and strategies aimed at optimizing the catalytic activity, stability, and effectiveness of HEAs in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting. Through an in-depth investigation of these aspects, the complexity inherent in constituent element interactions, reaction processes, and active sites associated with HEAs is aimed to unravel. Eventually, an outlook regarding challenges and impending difficulties and an outline of the future direction of HEA in electrocatalysis is provided. The thorough knowledge offered in this review will assist in formulating and designing catalysts based on HEAs for the next generation of electrochemistry-related applications.

Iridium Single Atoms to Nanoparticles: Nurturing the Local Synergy with Cobalt-Oxide Supported Palladium Nanoparticles for Oxygen Reduction Reaction

A ternary catalyst comprising Iridium (Ir) single-atoms (SA)s decorated on the Co-oxide supported palladium (Pd) nanoparticles (denoted as CPI-SA) is developed in this work. The CPI-SA with 1 wt.% of Ir exhibits unprecedented high mass activity (MA) of 7173 and 770 mA mgIr -1, respectively, at 0.85 and 0.90 V versus RHE in alkaline ORR (0.1 m KOH), outperforming the commercial Johnson Matthey Pt catalyst (J.M.-Pt/C; 20 wt.% Pt) by 107-folds. More importantly, the high structural reliability of the Ir single-atoms endows the CPI-SA with outstanding durability, where it shows progressively increasing MA of 13 342 and 1372 mA mgIr -1, respectively, at 0.85 and 0.90 V versus RHE up to 69 000 cycles (3 months) in the accelerated degradation test (ADT). Evidence from the in situ partial fluorescence yield X-ray absorption spectroscopy (PFY-XAS) and the electrochemical analysis indicate that the Ir single-atoms and adjacent Pd domains synergistically promote the O2 splitting and subsequent desorption of hydroxide ions (OH-), respectively. Whereas the Co-atoms underneath serve as electron injectors to boost the ORR activity of the Ir single-atoms. Besides, a progressive and sharp drop in the ORR performance is observed when Ir-clusters and Ir nanoparticles are decorated on the Co-oxide-supported Pd nanoparticles.

Vanadium-doped Ni microspheres loaded with phosphatization of NiMoO4 contributing to enhanced electron transfer for stable overall water splitting

At present, there are few reports on the micron-sized catalysts for overall water splitting. In this study, phosphating method were used to construct the self-supporting catalyst (V doped Ni microspheres coated by NiMoO4/Ni12P5) with microspherical structure, providing a short path and a stable structure to guarantee quick electron transfer and excellent catalytic performance. Hence, oxygen evolution reaction (OER) only needs 254 mV to reach a current density of 50 mA cm-2 in 1.0 mol/L KOH, after 114 h without attenuation. The catalyst can achieve a current densitiy of 10 mA cm-2 with a voltage of only 158 mV for hydrogen evolution reaction (HER). When micron scale V-Ni@NiMoO4/Ni12P5 is used as both anode and cathode for overall water splitting, the device can operate at a current density of 10 mA cm-2 for more than 200 h of good stability. Its superior catalytic performance can be attributed to the construction of micron size and phosphating. DFT calculations indicate that the introduction of P better activates the adsorbed *OH and H2O*, reduces reaction the energy barrier, and improves the catalytic activity.

Perovskite CoSn(OH)6 nanocubes with tuned d-band states towards enhanced oxygen evolution reactions

The CoSn(OH)6 perovskite hydroxide is a structure stable and inexpensive electrocatalyst for the oxygen evolution reaction (OER). However, the OER activity of CoSn(OH)6 is still unfavorable due to its limited active sites. In this work, an Fe3+ doping strategy is used to optimize the d-band state of the CoSn(OH)6 perovskite hydroxide. The CoSn(OH)6 catalyst with slightly Fe3+ doped nanocubes is synthesized by a facile hydrothermal method. Structure characterization shows that Fe3+ ions are incorporated into the crystal structure of CoSn(OH)6. Owing to the regulation of the electronic structure, CoSn(OH)6-Fe1.8% exhibits an OER overpotential of 289 mV at a current density of 10 mA cm-2 in OER electrochemical tests. In situ Raman spectroscopy shows that no obvious re-construction occurred during the OER for both CoSn(OH)6 and CoSn(OH)6-Fe1.8%. DFT calculations show that the introduction of Fe3+ into CoSn(OH)6 can shift the d-band center to a relatively high position, thus promoting the OER intermediates' adsorption ability. Further DFT calculations suggest that incorporation of an appropriate amount of Fe3+ into CoSn(OH)6 significantly reduces the rate-determining Gibbs free energy during the OER. This work offers valuable insights into tuning the d-band center of perovskite hydroxide materials for efficient OER applications.

Lattice-Disordered High-Entropy Alloy Engineered by Thermal Dezincification for Improved Catalytic Hydrogen Evolution Reaction

A disordered crystal structure is an asymmetrical atomic lattice resulting from the missing atoms (vacancies) or the lattice misarrangement in a solid-state material. It has been widely proven to improve the electrocatalytic hydrogen evolution reaction (HER) process. In the present work, due to the special physical properties (the low evaporation temperature of below 900 °C), Zn is utilized as a sacrificial component to create senary PtIrNiCoFeZn high-entropy alloy (HEA) with highly disordered lattices. The structure of the lattice-disordered PtIrNiCoFeZn HEA is characterized by the thermal diffusion scattering (TDS) in transmission electron microscope. Density functional theory calculations reveal that lattice disorder not only accelerates both the Volmer step and Tafel step during the HER process but also optimizes the intensity and distribution of projected density of states near the Fermi energy after the H2O and H adsorption. Anomalously high alkaline HER activity and stability are proven by experimental measurements. This work introduces a novel approach to preparing irregular lattices offering highly efficient HEA and a TDS characterization method to reveal the disordered lattice in materials. It provides a new route toward exploring and developing the catalytic activities of materials with asymmetrically disordered lattices.

Integration of a Bismuth-Based Tris-Mononuclear Complex with 2D Functional Materials for Highly Efficient and Durable Aqueous Electrocatalytic Hydrogen Evolution

The eminence of transitioning from traditional fossil fuel-based energy resources to renewable and sustainable energy sources is most evidently crucial. The potential of hydrogen as an alternative energy source has specifically focuses the electrocatalytic water splitting (EWS) as a promising technique for generating hydrogen. Development of efficient electrocatalysts to facilitate the EWS process while rationalizing the limitations of noble metal catalysts like platinum has become one of the daunting tasks. Consequently, porous functional materials such as metal complexes (MCs) and graphene oxide (GO) can act as potential catalysts for EWS. Therefore, a composite of GO and a mononuclear bismuth metal complex is synthesized through in situ facile synthesis, which is further utilized as an efficient electrocatalyst for the hydrogen evolution reaction (HER). Several potential electrocatalytic MC@GO composite (BMGO-3,5,7) materials were prepared with compositional variation of GO (3, 5, and 7 wt %). The experimental results demonstrate that the BMGO5 composite exhibits excellent HER activity with a low overpotential value of 105 mV at 10 mA cm-2 and a low Tafel slope of 44 mV dec-1 in 1 M KOH solution. Furthermore, a comprehensive investigation on the potentiality of the BMC-GO composite for hydrogen evolution from river water splitting was performed in order to address the issue of freshwater depletion. Inclusion of a mononuclear MC for facile synthesis of functional GO-based efficient electrocatalyst material is very scanty in the literature. This unique approach could assist future research endeavors toward designing efficient electrocatalysts for sustainable renewable energy generation. This is one of the first of its kind, where mononuclear MCs were utilized to develop GO-based functional composite materials for efficient electrocatalysis toward sustainable renewable energy generation.

Surface Termination (-O, -F or -OH) and Metal Doping on the HER Activity of Mo2CTx MXene

Two-dimensional MXenes have recently garnered significant attention as electrocatalytic materials for hydrogen evolution reaction (HER). However, previous theoretical studies mainly focused on the effect of pure functional groups while neglecting hybrid functional groups that are commonly observed in experiments. Herein, we investigated the hybrid functionalized Mo2CTx MXene (T=-O, -F or -OH) to probe the HER properties. In binary O/F co-functionalization, the presence of F groups would attenuate the H adsorption and lead to the enhanced HER activity than the fully O-terminated Mo2CO2. However, the surface HER activity of ternary O/F/OH functionalized Mo2CTx is not satisfactory owing to the relatively weak H adsorption capacity. To further enhance the catalytic activity, modification was performed by introducing another metal element into its lattice structure. The doped metal (Fe, Co, Ni, Cu) exhibits reduced charge transfer to O compared to Mo atoms, leading to enhanced H adsorption and improved overall activity. The synergistic effect of hybrid functionalization and TM modification provides useful guidance for achieving feasible Mo2CTx candidates with high HER performance, which can be applied to the electrocatalytic applications of other MXenes.

Reduction of 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)Furan at High Current Density using a Ga-Doped AgCu:Cationomer Hybrid Electrocatalyst

Hydrogenation of biomass-derived chemicals is of interest for the production of biofuels and valorized chemicals. Thermochemical processes for biomass reduction typically employ hydrogen as the reductant at elevated temperatures and pressures. Here, the authors investigate the direct electrified reduction of 5-hydroxymethylfurfural (HMF) to a precursor to bio-polymers, 2,5-bis(hydroxymethyl)furan (BHMF). Noting a limited current density in prior reports of this transformation, a hybrid catalyst consisting of ternary metal nanodendrites mixed with a cationic ionomer, the latter purposed to increase local pH and facilitate surface proton diffusion, is investigated. This approach, when implemented using Ga-doped Ag-Cu electrocatalysts designed for p-d orbital hybridization, steered selectivity to BHMF, achieving a faradaic efficiency (FE) of 58% at 100 mA cm-2 and a production rate of 1 mmol cm-2 h-1, the latter a doubling in rate compared to the best prior reports.

ZnMo-MOF as anti-CO hydrogen electrocatalyst enhance microbial electrosynthesis for CO/CO2 conversion

Microbial electrosynthesis (MES) is an electrically driven technology that can be used for converting CO/CO2 into chemicals. The unique electronic and substrate properties of CO make it an important research target for MES. However, CO can poison the cathode and increase the overpotential of hydrogen evolution reaction (HER), thus reducing the electron transfer rate via H2. This work evaluated the effect of an anti-CO HER catalyst on the performance of MES for CO/CO2 conversion. ZnMo-metal-organic framework (MOF) materials with different calcination temperatures were synthesized. ZnMo-MOF-800 with Mo2C nanoparticles as active centers exhibited excellent resistance to CO toxicity. It also obtained the highest hydrogen evolution and enhanced electron transfer rate in CO atmosphere. MES with ZnMo-MOF-800 cathode and Clostridium ljungdahlii as biocatalyst obtained 0.31 g L-1 d-1 acetate yield, 0.1 g L-1 d-1 butyrate yield, and 0.09 g L-1 d-1 2,3-butanediol yield in CO/CO2, while Pt/C only get 0.076 g L-1 d-1 acetate yield, 0.05 g L-1 d-1 butyrate yield and 0.02 g L-1 d-1 2,3-butanediol yield. ZnMo-MOF-800 was conducive to biofilm formation, enabling it to better resist CO toxicity. This work provides new opportunities for constructing a highly efficient cathode with an anti-CO hydrogen evolution catalyst to enhance CO/CO2 conversion in MES.

In Operando X-ray Spectroscopic and DFT Studies Revealing Improved H2 Evolution by the Synergistic Ni-Co Electron Effect in the Alkaline Condition

The different electrolyte conditions, e.g., pH value, for driving efficient HER and OER are one of the major issues hindering the aim for electrocatalytic water splitting in a high efficiency. In this regard, seeking durable and active HER electrocatalysts to align the alkaline conditions of the OER is a promising solution. However, the success in this strategy will depend on a fundamental understanding about the HER mechanism at the atomic scale. In this work, we have provided thorough understanding for the electrochemical HER mechanisms in KOH over Ni- and Co-based hollow pyrite microspheres by in operando X-ray spectroscopies and DFT calculations, including NiS2, CoS2, and Ni0.5Co0.5S2. We discovered that the Ni sites in hollow NiS2 microspheres were very stable and inert, while the Co sites in hollow CoS2 microspheres underwent reduction and generated Co metallic crystal domains under HER. The generation of Co metallic sites would further deactivate H2 evolution due to the large hydrogen desorption free energy (-1.73 eV). In contrast, the neighboring Ni and Co sites in hollow Ni0.5Co0.5S2 microspheres exhibited the electronic interaction to elevate the reactivity of Ni and facilitate the stability of Co without structure or surface degradation. The energy barrier in H2O adsorption/dissociation was only 0.73 eV, followed by 0.06 eV for hydrogen desorption over the Ni0.5Co0.5S2 surface, revealing Ni0.5Co0.5S2 as a HER electrocatalyst with higher durability and activity than NiS2 and CoS2 in the alkaline medium due to the synergy of neighboring Ni and Co sites. We believe that the findings in our work offer a guidance toward future catalyst design.

The electrocatalytic activity for the hydrogen evolution reaction on alloys is determined by element-specific adsorption sites rather than d-band properties

Trends of the electrocatalytic activities for the hydrogen evolution reaction (HER) across transition metals are typically explained by d-band properties such as center or upper edge positions in relation to Fermi levels. Here, the universality of this relation is questioned for alloys, exemplified for the AuPt system which is examined with electrocatalytic measurements and density functional theory (DFT) calculations. At small overpotentials, linear combinations of the pure-metals' Tafel kinetics normalized to the alloy compositions are found to precisely resemble the measured HER activities. DFT calculations show almost neighbor-independent adsorption energies on Au and Pt surface-sites, respectively, as the adsorbed hydrogen influences the electron density mostly locally at the adsorption site itself. In contrast, the density of states of the d-band describe the delocalized conduction electrons in the alloys, which are unable to portray the local electronic environments at adsorption sites and related bonding strengths. The adsorption energies at element-specific surface sites are related to overpotential-dependent reaction mechanisms in a multidimensional reinterpretation of the volcano plot for alloys, which bridges the found inconsistencies between activity and bonding strength descriptors of the common electrocatalytic theory for alloys.

Amorphous Bismuth-Tin Oxide Nanosheets with Optimized C-N Coupling for Efficient Urea Synthesis

Closing the carbon and nitrogen cycles by electrochemical methods using renewable energy to convert abundant or harmful feedstocks into high-value C- or N-containing chemicals has the potential to transform the global energy landscape. However, efficient conversion avenues have to date been mostly realized for the independent reduction of CO2 or NO3-. The synthesis of more complex C-N compounds still suffers from low conversion efficiency due to the inability to find effective catalysts. To this end, here we present amorphous bismuth-tin oxide nanosheets, which effectively reduce the energy barrier of the catalytic reaction, facilitating efficient and highly selective urea production. With enhanced CO2 adsorption and activation on the catalyst, a C-N coupling pathway based on *CO2 rather than traditional *CO is realized. The optimized orbital symmetry of the C- (*CO2) and N-containing (*NO2) intermediates promotes a significant increase in the Faraday efficiency of urea production to an outstanding value of 78.36% at -0.4 V vs RHE. In parallel, the nitrogen and carbon selectivity for urea formation is also enhanced to 90.41% and 95.39%, respectively. The present results and insights provide a valuable reference for the further development of new catalysts for efficient synthesis of high-value C-N compounds from CO2.

Material Engineering Strategies for Efficient Hydrogen Evolution Reaction Catalysts

Water electrolysis, a key enabler of hydrogen energy production, presents significant potential as a strategy for achieving net-zero emissions. However, the widespread deployment of water electrolysis is currently limited by the high-cost and scarce noble metal electrocatalysts in hydrogen evolution reaction (HER). Given this challenge, design and synthesis of cost-effective and high-performance alternative catalysts have become a research focus, which necessitates insightful understandings of HER fundamentals and material engineering strategies. Distinct from typical reviews that concentrate only on the summary of recent catalyst materials, this review article shifts focus to material engineering strategies for developing efficient HER catalysts. In-depth analysis of key material design approaches for HER catalysts, such as doping, vacancy defect creation, phase engineering, and metal-support engineering, are illustrated along with typical research cases. A special emphasis is placed on designing noble metal-free catalysts with a brief discussion on recent advancements in electrocatalytic water-splitting technology. The article also delves into important descriptors, reliable evaluation parameters and characterization techniques, aiming to link the fundamental mechanisms of HER with its catalytic performance. In conclusion, it explores future trends in HER catalysts by integrating theoretical, experimental and industrial perspectives, while acknowledging the challenges that remain.

Graphitic carbon nitride supported Ni-Co dual-atom catalysts beyond Ni1(Co1) single-atom catalysts for hydrogen production: a density functional theory study

Using density functional theory calculations we investigate the formation, structure and electronic properties of gh-C3N4-supported Ni-Co (Ni-Co/gh-C3N4) dual-atom catalysts and Ni1(Co1) single-metal catalysts, as a paradigmatic example of single-atom versus few-atom catalysts. An inverted mold assumption is proposed to identify the factors determining the number, shape and packing manner of metal atoms inside the pores of gh-C3N4. The area matching between virtual fragments and metal fillers and lattice inheritance from N coordination and metal aggregates allow for a stable Ni-Co/gh-C3N4, which would possess more active sites and a more complex structure-activity relation than single-atom doping. The hydrogen production behavior and catalytic activity of this catalyst are comprehensively discussed. Ni-Co/gh-C3N4 exhibits higher hydrogen evolution activity than Ni1(Co1)/gh-C3N4 at an appropriate H coverage, which is comparable to Pt under analogous conditions. This strategy, derived from the inverted mold assumption, is deemed to be a simple and easy-to-operate method for designing and building metal aggregates confined inside the pores of two-dimensional materials and in the cavities of nanoparticles for few-atom catalysts.

Rescuing zinc anode-electrolyte interface: mechanisms, theoretical simulations and in situ characterizations

The research interest in aqueous zinc-ion batteries (AZIBs) has been surging due to the advantages of safety, abundance, and high electrochemical performance. However, some technique issues, such as dendrites, hydrogen evolution reaction, and corrosion, severely prohibit the development of AZIBs in practical utilizations. The underlying mechanisms regarding electrochemical performance deterioration and structure degradation are too complex to understand, especially when it comes to zinc metal anode-electrolyte interface. Recently, theoretical simulations and in situ characterizations have played a crucial role in AZIBs and are exploited to guide the research on electrolyte engineering and solid electrolyte interphase. Herein, we present a comprehensive review of the current state of the fundamental mechanisms involved in the zinc plating/stripping process and underscore the importance of theoretical simulations and in situ characterizations in mechanism research. Finally, we summarize the challenges and opportunities for AZIBs in practical applications, especially as a stationary energy storage and conversion device in a smart grid.

Hydrogen evolution descriptors of 55-atom PtNi nanoclusters and interaction with graphite

Density functional simulations have been performed for PtnNi55-nclusters (n=0,12,20,28,42,55) to investigate their catalytic properties for the hydrogen evolution reaction (HER). Starting from the icosahedralPt12Ni43, hydrogen adsorption energetics and electronicd-band descriptors indicate HER activity comparable to that of purePt55(distorted reduced core structure). The PtNi clusters accommodate a large number of adsorbed hydrogen before reaching a saturated coverage, corresponding to 3-4 H atoms per icosahedron facet (in total ∼70-80). The differential adsorption free energies are well within the window of|ΔGH|<0.1 eV which is considered optimal for HER. The electronic descriptors show similarities with the platinumd-band, although the uncovered PtNi clusters are magnetic. Increasing hydrogen coverage suppresses magnetism and depletes electron density, resulting in expansion of the PtNi clusters. For a single H atom, the adsorption free energy varies between -0.32 (Pt12Ni43) and -0.59 eV (Pt55). The most stable adsorption site is Pt-Pt bridge for Pt-rich compositions and a hollow site surrounded by three Ni for Pt-poor compositions. A hydrogen molecule dissociates spontaneously on the Pt-rich clusters. The above HER activity predictions can be extended to PtNi on carbon support as the interaction with a graphite model structure (w/o vacancy defect) results in minor changes in the cluster properties only. The cluster-surface interaction is the strongest forPt55due to its large facing facet and associated van der Waals forces.

Precious Metal Free Hydrogen Evolution Catalyst Design and Application

The quest to identify precious metal free hydrogen evolution reaction catalysts has received unprecedented attention in the past decade. In this Review, we focus our attention to recent developments in precious metal free hydrogen evolution reactions in acidic and alkaline electrolyte owing to their relevance to commercial and near-commercial low-temperature electrolyzers. We provide a detailed review and critical analysis of catalyst activity and stability performance measurements and metrics commonly deployed in the literature, as well as review best practices for experimental measurements (both in half-cell three-electrode configurations and in two-electrode device testing). In particular, we discuss the transition from laboratory-scale hydrogen evolution reaction (HER) catalyst measurements to those in single cells, which is a critical aspect crucial for scaling up from laboratory to industrial settings but often overlooked. Furthermore, we review the numerous catalyst design strategies deployed across the precious metal free HER literature. Subsequently, we showcase some of the most commonly investigated families of precious metal free HER catalysts; molybdenum disulfide-based, transition metal phosphides, and transition metal carbides for acidic electrolyte; nickel molybdenum and transition metal phosphides for alkaline. This includes a comprehensive analysis comparing the HER activity between several families of materials highlighting the recent stagnation with regards to enhancing the intrinsic activity of precious metal free hydrogen evolution reaction catalysts. Finally, we summarize future directions and provide recommendations for the field in this area of electrocatalysis.

In situ synthesis of tentacle-like NiC/Mo2C/NF nanorods array with excellent hydrogen evolution reaction at high current densities

The problem limiting the use of hydrogen evolution reactions in industry is the inability of electrocatalysts to operate stably at high current densities, so the development of stable and efficient electrocatalysts is important for hydrogen production by water splitting. By designing a rational interface engineering not only can the problem of limited number of catalytic sites in the catalyst be solved, but also can facilitate electron transfer, thus enhancing the efficiency of water splitting. Here, we designed a two-stage chemical vapour deposition method to construct NiC/Mo2C nanorod arrays on nickel foam to enhance the electrocatalytic ability of the catalysts, which exhibited efficient HER catalytic activity due to their special tentacle-like nanorod structure and abundant heterogeneous junction surfaces, which brought about abundant active sites as well as promoted electron transfer capability. The resulting catalysts provide current densities of 10, 100 and 500 mA cm-2 with overpotentials of 31, 153 and 264 mV, and exhibit excellent stability at current densities of 10 mA cm-2 for 200 h. This discovery provides a new idea for the rational design of catalysts with special morphologies.

Schottky Junctions with Bi@Bi2MoO6 Core-Shell Photocatalysts toward High-Efficiency Solar N2-to-Ammonnia Conversion in Aqueous Phase

The photocatalytic nitrogen reduction reaction (NRR) in aqueous solution is a green and sustainable strategy for ammonia production. Nonetheless, the efficiency of the process still has a wide gap compared to that of the Haber-Bosch one due to the difficulty of N2 activation and the quick recombination of photo-generated carriers. Herein, a core-shell Bi@Bi2MoO6 microsphere through constructing Schottky junctions has been explored as a robust photocatalyst toward N2 reduction to NH3. Metal Bi self-reduced onto Bi2MoO6 not only spurs the photo-generated electron and hole separation owing to the Schottky junction at the interface of Bi and Bi2MoO6 but also promotes N2 adsorption and activation at Bi active sites synchronously. As a result, the yield of the photocatalytic N2-to-ammonia conversion reaches up to 173.40 μmol g-1 on core-shell Bi@Bi2MoO6 photocatalysts, as much as two times of that of bare Bi2MoO6. This work provides a new design for the decarbonization of the nitrogen reduction reaction by the utilization of renewable energy sources.

Phase-Transfer Catalysis for Electrochemical Chlorination and Nitration of Arenes

A biphasic anodic oxidation method for aromatic halogenation process was developed, where aqueous metal salts were directly used as halogen source. Ammonium salts serve as both electrolytes and phase transfer catalysis to facilitate anion transport and oxidative transformation. This design allows for chlorination or nitration of multiple types of arenes using NaCl or KNO2.

An All-In-One Integrating Strategy for Designing Platinum(II)-Based Supramolecular Polymers for Photocatalytic Hydrogen Evolution

Organic polymer photocatalysts have achieved significant progress in photocatalytic hydrogen evolution, while developing the integrated organic polymers possessing the functions of photosensitizer, electron transfer mediator, and catalyst simultaneously is urgently needed and presents a great challenge. Considering that chalcogenoviologens are able to act as photosensitizers and electron-transfer mediators, a series of chalcogenoviologen-containing platinum(II)-based supramolecular polymers is designed, which exhibited strong visible light-absorbing ability and suitable bandgap for highly efficient photocatalytic hydrogen evolution without the use of a cocatalyst. The hydrogen evolution rate (HER) increases steadily with the decrease in an optical gap of the polymer. Among these "all-in-one" polymers, Se-containing 2D porous polymer exhibited the best photocatalytic performance with a HER of 3.09 mmol g-1 h-1 under visible light (>420 nm) irradiation. Experimental and theoretical calculations reveal that the distinct intramolecular charge transfer characteristics and heteroatom N in terpyridine unit promote charge separation and transfer within the molecules. This work could provide new insights into the design of metallo-supramolecular polymers with finely tuned components for photocatalytic hydrogen evolution from water.

Platinum Surface Water Orientation Dictates Hydrogen Evolution Reaction Kinetics in Alkaline Media

The fundamental understanding of sluggish hydrogen evolution reaction (HER) kinetics on a platinum (Pt) surface in alkaline media is a topic of considerable debate. Herein, we combine cyclic voltammetry (CV) and electrical transport spectroscopy (ETS) approaches to probe the Pt surface at different pH values and develop molecular-level insights into the pH-dependent HER kinetics in alkaline media. The change in HER Tafel slope from ∼110 mV/decade in pH 7-10 to ∼53 mV/decade in pH 11-13 suggests considerably enhanced kinetics at higher pH. The ETS studies reveal a similar pH-dependent switch in the ETS conductance signal at around pH 10, suggesting a notable change of surface adsorbates. Fixed-potential calculations and chemical bonding analysis suggest that this switch is attributed to a change in interfacial water orientation, shifting from primarily an O-down configuration below pH 10 to a H-down configuration above pH 10. This reorientation weakens the O-H bond in the interfacial water molecules and modifies the reaction pathway, leading to considerably accelerated HER kinetics at higher pH. Our integrated studies provide an unprecedented molecular-level understanding of the nontrivial pH-dependent HER kinetics in alkaline media.

Activating TiO2 through the Phase Transition-Mediated Hydrogen Spillover to Outperform Pt for Electrocatalytic pH-Universal Hydrogen Evolution

Endowing conventional materials with specific functions that are hardly available is invariably of significant importance but greatly challenging. TiO2 is proven to be highly active for the photocatalytic hydrogen evolution while intrinsically inert for electrocatalytic hydrogen evolution reaction (HER) due to its poor electrical conductivity and unfavorable hydrogen adsorption/desorption behavior. Herein, the first activation of inert TiO2 for electrocatalytic HER is demonstrated by synergistically modulating the positions of d-band center and triggering hydrogen spillover through the dual doping-induced partial phase transition. The N, F co-doping-induced partial phase transition from anatase to rutile phase in TiO2 (AR-TiO2|(N,F)) exhibits extraordinary HER performance with overpotentials of 74, 80, and 142 mV at a current density of 10 mA cm-2 in 1.0 M KOH, 0.5 M H2SO4, and 1.0 M phosphate-buffered saline electrolytes, respectively, which are substantially better than pure TiO2, and even superior to the benchmark Pt/C catalysts. These findings may open a new avenue for the development of low-cost alternative to noble metal catalysts for electrocatalytic hydrogen production.

Potential-Rate Correlations of Supported Palladium-Based Catalysts for Aqueous Formic Acid Dehydrogenation

Aqueous formic acid dehydrogenation (FAD) is a crucial process for hydrogen production, as hydrogen is a clean energy carrier. During this process, formic acid converts into hydrogen and carbon dioxide over a catalyst. Pd-based catalysts have exhibited significant potential in FAD due to their high activity and selectivity. In this study, we investigated aqueous thermal FAD in a mixture of formic acid and sodium formate using electrochemical open-circuit potential (OCP) measurement by loading the catalysts onto a conductive substrate as a working electrode. By varying the reaction conditions such as the concentration of reactants and modifying Pd with Ag, different FAD rates were obtained. Consequently, we revealed the correlation between the catalyst OCP and FAD rate; superior FAD rates reflected a more negative catalyst OCP. Furthermore, deactivation was observed across all catalysts during FAD, with a concurrent increase in catalyst OCP. Interestingly, we found that the logarithm of the FAD rate showed a linear correlation with the OCP of the catalyst during the decay phase, which we quantitatively explained based on the reaction mechanism. This study presents a new discovery that bridges thermal and electrocatalysis.

Boosting Efficient and Sustainable Alkaline Water Oxidation on a W-CoOOH-TT Pair-Sites Catalyst Synthesized via Topochemical Transformation

The development of facile methods for constructing highly active, cost-effective catalysts that meet ampere-level current density and durability requirements for an oxygen evolution reaction is crucial. Herein, a general topochemical transformation strategy is posited: M-Co9S8 single-atom catalysts (SACs) are directly converted into M-CoOOH-TT (M = W, Mo, Mn, V) pair-sites catalysts under the role of incorporating of atomically dispersed high-valence metals modulators through potential cycling. Furthermore, in situ X-ray absorption fine structure spectroscopy is used to track the dynamic topochemical transformation process at the atomic level. The W-Co9S8 breaks through the low overpotential of 160 mV at 10 mA cm-2. A series of pair-site catalysts exhibit a large current density of approaching 1760 mA cm-2 at 1.68 V vs reversible hydrogen electrode (RHE) in alkaline water oxidation and achieve a ≈240-fold enhancement in the normalized intrinsic activity compare to that reported CoOOH, and sustainable stability of 1000 h. Moreover, the O─O bond formation is confirmed via a two-site mechanism, supported by in situ synchrotron radiation infrared and density functional theory (DFT) simulations, which breaks the limit of adsorption-energy scaling relationship on conventional single-site.

Double metals sites synergistically enhanced photocatalytic N2 fixation performance over Bi24O31Br10@Bi/Ti3C2Tx Ohm junctions

At present, it is a research hotspot to realize green synthetic ammonia by using solar energy. Exploring cheap and efficient co-catalysts for enhancing the performance of photocatalysts is a challenge in the field of energy conversion. In order to boost the charge separation/transfer of the photocatalyst and widen the visible light absorption, Bi24O31Br10@Bi/Ti3C2Tx with double Ohm junction is successfully fabricated by in situ growth of metal Bi and loading Ti3C2Tx MXene on the surface of Bi24O31Br10. The dual active sites of Bi and Ti3C2Tx MXene not only broaden the light adsorption of Bi24O31Br10 but also serve as excellent 'electronic receptor' for synergically enhancing the separation/transfer efficiency of photogenerated electrons/holes. Meanwhile, temperature programmed desorption (TPD) result revealed that MXene and Bi can promote N2 adsorption/activation and NH3 desorption over Bi24O31Br10@Bi/Ti3C2Tx. As a result, under mild conditions and without the presence of hole scavenger, the ammonia synthesis efficiency of Bi24O31Br10@Bi/Ti3C2Tx-20 % reached 53.86 μmol g-1cat for three hours which is 3.2 and 53.8 times of Bi24O31Br10 and Ti3C2Tx, respectively. This study offers a novel scheme for the construction of photocatalytic systems and demonstrates Ti3C2Tx MXene and metal Bi as a promising and cheap co-catalyst.

Ultrafine Ru nanoparticles stabilized by V8C7/C for enhanced hydrogen evolution reaction at all pH

The development of cost-effective electrocatalysts with high efficiency and long durability for hydrogen evolution reaction (HER) remains a great challenge in the field of water splitting. Herein, we design an ultrafine and highly dispersed Ru nanoparticles stabilized on porous V8C7/C matrix via pyrolysis of the metal-organic frameworks V-BDC (BDC: 1,4-benzenedicarboxylate). The obtained Ru-V8C7/C composite exhibits excellent HER performance in all pH ranges. At the overpotential of 40 mV, its mass activity is about 1.9, 4.1 and 9.4 times higher than that of commercial Pt/C in acidic, neutral and alkaline media, respectively. Meanwhile, Ru-V8C7/C shows the remarkably high stability in all pH ranges which, in particular, can maintain the current density of 10 mA cm-2 for over 150 h in 1.0 mol L-1 phosphate buffer saline (PBS). This outstanding HER performance can be attributed to the high intrinsic activity of Ru species and their strong interface interactions to the V8C7/C substrate. The synergistic effect of abundant active sites on the surface and the formed Ru-C-V units at the interface promotes the adsorption of reaction intermediates and the release of active sites, contributing the fast HER kinetics. This work provides a reference for developing versatile and robust HER catalysts by surface and interface regulation for pH tolerance.

Co─Mn Bimetallic Nanowires by Interfacial Modulation with/without Vacancy Filling as Active and Durable Electrocatalysts for Water Splitting

Active and stable nonnoble electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are required for water splitting by sustainable electricity. Here, Mn bonded with O and P is incorporated to modulate Co3S4 and Co2P respectively to enhance the catalytic activity and extend the catalyst lifetime. Mn3O4 adjusts the electronic structure of Co3S4 and Co atom fills the oxygen vacancy in Mn3O4. The interfacial interaction endows Co3S4/Mn3O4 to a lower reaction barrier due to ideal binding energies for OER intermediates. Structure stability of active sites and enhanced Co─S bonds by Operando Raman spectroscopy and theoretical calculations reduce the dissolution of Co3S4/Mn3O4, resulting in a lifetime of 500 h at 50 mA cm-2 for OER. The modulation of Co2P by MnP weakens the interaction between Co sites and adsorbed H*, achieving a high activity under a large current for HER. The assembled electrolyzer affords 50 mA cm-2 at 1.58 V and exhibits a lifetime of 350 h at 50 mA cm-2. The calculations disclose the electron interaction for the activity and stability, as well as the enhanced conductivity. The findings develop new avenues toward promoting catalytic activity and stability, making Co─Mn bimetallic nanowires efficient electrocatalysts for nonnoble water electrolyzers.

Highly Crystalline Iridium-Nickel Nanocages with Subnanopores for Acidic Bifunctional Water Splitting Electrolysis

Developing efficient bifunctional materials is highly desirable for overall proton membrane water splitting. However, the design of iridium materials with high overall acidic water splitting activity and durability, as well as an in-depth understanding of the catalytic mechanism, is challenging. Herein, we successfully developed subnanoporous Ir3Ni ultrathin nanocages with high crystallinity as bifunctional materials for acidic water splitting. The subnanoporous shell enables Ir3Ni NCs optimized exposure of active sites. Importantly, the nickel incorporation contributes to the favorable thermodynamics of the electrocatalysis of the OER after surface reconstruction and optimized hydrogen adsorption free energy in HER electrocatalysis, which induce enhanced intrinsic activity of the acidic oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Together, the Ir3Ni nanocages achieve 3.72 A/mgIr(η=350 mV) and 4.47 A/mgIr(η=40 mV) OER and HER mass activity, which are 18.8 times and 3.3 times higher than that of commercial IrO2 and Pt, respectively. In addition, their highly crystalline identity ensures a robust nanostructure, enabling good catalytic durability during the oxygen evolution reaction after surface oxidation. This work provides a new revenue toward the structural design and insightful understanding of metal alloy catalytic mechanisms for the bifunctional acidic water splitting electrocatalysis.

Influence factors of CO adsorption on C2N-supported dual-atom catalysts unveiled by machine learning and twofold feature engineering

Dual-atom catalysts (DACs) have emerged as a compelling frontier in the realm of the electrochemical carbon dioxide reduction reaction (CO2RR). However, elucidating the intrinsic properties of dual-atom pairs and their direct correlation with catalytic activity poses significant challenges. Herein, we investigate CO adsorption on 248 kinds of C2N-supported DACs and analyze the underlying structure-activity relationships of dual transition metal (TM) atoms based on density functional theory (DFT) calculations and machine learning (ML) models. Compared to the direct input of atomic features in the decision tree model of ML, we confirm that extra feature engineering with the introduction of the arithmetic combination of atomic features can better reflect the correlation of dual TM atoms on C2N-based DACs. Further feature importance analysis reveals a strong relationship between the last one occupied orbital radius (rv), group number (G) for dual TM atoms and the CO binding strength, as well as a potential connection with the d band centre (εd). Our work provides deeper insights into the design of DACs and highlights the significance of twofold feature engineering for the synergistic effects between dual TM atoms.

Correlation between d Electrons and the Sweet Spot for the Hydrogen Evolution Reaction: Is Platinum Always the Best Electrocatalyst?

Herein, two Laves intermetallic series, ZrCo1.75M0.25 and NbCo1.75M0.25 (M = Fe, Co, Ni, Ru, Rh, Pd, Os, Ir, and Pt), were synthesized, and their hydrogen evolution reaction (HER) activities were examined to reveal the influence of d electrons to the corresponding HER activities. Owing to the different electronegativity between Zr and Nb (χZr = 1.33; χNb = 1.60), Co and/or M elements receive more electrons in ZrCo1.75M0.25 than that of the Nb one. This leads to the overall weak H adsorption energy (ΔGHad) of ZrCo1.75M0.25 series compared to that of NbCo1.75M0.25 and rationalizes well the superior HER activity of the Rh member compared to that of the Pt one in the ZrCo1.75M0.25 series. Under industrial conditions (333 K, 6.0 M KOH), ZrCo1.75Rh0.25 only requires an overpotential of 110 mV to reach the current density of 500 mA/cm2 and can be operated at high current density over 400 h. This work demonstrates that with a proper combination between elements in intermetallic phases, one can manipulate d electrons of the active metal to be closer to the sweet spot (ΔGHad = 0). The Pt member may no longer exhibit the best HER activity in series, and all elements exhibit the potential to outperform the Pt member in the HER with careful control of the d electron population.

Supervised AI and Deep Neural Networks to Evaluate High-Entropy Alloys as Reduction Catalysts in Aqueous Environments

Competitive surface adsorption energies on catalytic surfaces constitute a fundamental aspect of modeling electrochemical reactions in aqueous environments. The conventional approach to this task relies on applying density functional theory, albeit with computationally intensive demands, particularly when dealing with intricate surfaces. In this study, we present a methodological exposition of quantifying competitive relationships within complex systems. Our methodology leverages quantum-mechanical-guided deep neural networks, deployed in the investigation of quinary high-entropy alloys composed of Mo-Cr-Mn-Fe-Co-Ni-Cu-Zn. These alloys are under examination as prospective electrocatalysts, facilitating the electrochemical synthesis of ammonia in aqueous media. Even in the most favorable scenario for nitrogen fixation identified in this study, at the transition from O and OH coverage to surface hydrogenation, the probability of N2 coverage remains low. This underscores the fact that catalyst optimization alone is insufficient for achieving efficient nitrogen reduction. In particular, these insights illuminate that system consideration with oxygen- and hydrogen-repelling approaches or high-pressure solutions would be necessary for improved nitrogen reduction within an aqueous environment.

Photocatalytic Enhancement Strategy with the Introduction of Metallic Bi: A Review on Bi/Semiconductor Photocatalysts

Semiconductor photocatalysis has great potential in the fields of solar fuel production and environmental remediation. Nevertheless, the photocatalytic efficiency still constrains its practical production applications. The development of new semiconductor materials is essential to enhance the solar energy conversion efficiency of photocatalytic systems. Recently, the research on enhancing the photocatalytic performance of semiconductors by introducing bismuth (Bi) has attracted widespread attention. In this review, we briefly overview the main synthesis methods of Bi/semiconductor photocatalysts and summarize the control of the micromorphology of Bi in Bi/semiconductors and the key role of Bi in the catalytic system. In addition, the promising applications of Bi/semiconductors in photocatalysis, such as pollutant degradation, sterilization, water separation, CO2 reduction, and N2 fixation, are outlined. Finally, an outlook on the challenges and future research directions of Bi/semiconductor photocatalysts is given. We aim to offer guidance for the rational design and synthesis of high-efficiency Bi/semiconductor photocatalysts for energy and environmental applications.

2D Nano-Channeled Molybdenum Compounds for Accelerating Interfacial Polysulfides Catalysis in Li-S Battery

The shuttle effect, which causes the loss of active sulfur, passivation of lithium anode, and leads to severe capacity attenuation, is currently the main bottleneck for lithium-sulfur batteries. Recent studies have disclosed that molybdenum compounds possess exceptional advantages as a polar substrate to immobilize and catalyze lithium polysulfide such as high conductivity and strong sulfiphilicity. However, these materials show incomplete contact with sulfur/polysulfides, which causes uneven redox conversion of sulfur and results in poor rate performance. Herein, a new type of 2D nano-channeled molybdenum compounds (2D-MoNx) via the 2D organic-polyoxometalate superstructure for accelerating interfacial polysulfide catalysis toward high-performance lithium-sulfur batteries is reported. The 2D-MoNx shows well-interlinked nano-channels, which increase the reactive interface and contact surface with polysulfides. Therefore, the battery equipped with 2D-MoNx displays a high discharge capacity of 912.7 mAh g-1 at 1 C and the highest capacity retention of 523.7 mAh g-1 after 300 cycles. Even at the rate of 2 C, the capacity retention can be maintained at 526.6 mAh g-1 after 300 cycles. This innovative nano-channel and interfacial design of 2D-MoNx provides new nanostructures to optimize the sulfur redox chemistry and eliminate the shuttle effect of polysulfides.