Understanding biophysicochemical interactions at the nano-bio interface

Spatial distribution of small microplastics in the Norwegian Coastal Current

High concentrations of microplastic (MP) particles have been reported in the Arctic Ocean. However, studies on the high-resolution lateral and vertical transport of MPs from the European waters to the Arctic are still scarce. Here, we provide information about the concentrations and compositions of MPs in surface, subsurface, and deeper waters (< 1 m, ∼ 4 m, and 17-1679 m) collected at 18 stations on six transects along the Norwegian Coastal Current (NCC) using an improved Neuston Catamaran, the COntinuos MicroPlastic Automatic Sampling System (COMPASS), and in situ pumps, respectively. FTIR microscopy and spectroscopy were applied to measure MP concentration, polymer composition, and size distribution. Results indicate that the concentrations of small microplastics (SMPs, <300 μm) varied considerably (0-1240 MP m-3) within the water column, with significantly higher concentrations in the surface (189 MP m-3) and subsurface (38 MP m-3) waters compared to deeper waters (16 MP m-3). Furthermore, the average concentration of SMPs in surface water samples was four orders of magnitude higher than the abundance of large microplastics (LMPs, >300 μm), and overall, SMPs <50 μm account for >80 % of all detected MPs. However, no statistically significant geographical patterns were observed in SMP concentrations in surface/subsurface seawaters between the six sampling transects, suggesting a relatively homogeneous horizontal distribution of SMPs in the upper ocean within the NCC/Norwegian Atlantic Current (NwAC) interface. The Lagrangian particle dispersal simulation model further enabled us to assess the large-scale transport of MPs from the Northern European waters to the Arctic.

Nonequilibrium Dynamic Phase Diagram for Transmembrane Transport of Active Particles

In recent years, there has been considerable push toward the biomedical applications with active particles, which have great potential to revolutionize disease diagnostics and therapy. The direct penetration of active particles through the cell membrane leads to more efficient intracellular delivery than previously considered endocytosis processes but may cause membrane disruption. Understanding fundamental behaviors of cell membranes in response to such extreme impacts by active particles is crucial to develop active particle-based biomedical technologies and manage health and safety issues in this emerging field. Unfortunately, the physical principles underlying the nonequilibrium behaviors from endocytosis to direct penetration remain elusive, and experiments are challenging. Here, we present a computed dynamic phase diagram for transmembrane transport of active particles and identify four characteristic dynamic phases in endocytosis and direct penetration according to the particle activity and membrane tension. The boundaries dividing these phases are analytically obtained with theoretical models, elucidating the nonequilibrium physics and criteria for the transition between different phases. Furthermore, we numerically and experimentally show three distinct dynamic regimes related to the interplay between necking and wrapping during the endocytosis process of active particles, which strikingly contrast the regimes for passive particles. Overall, these findings could be useful for sharpening the understanding of basic principles underlying biological issues related to the safe and efficient biomedical applications of such emerging matters.

Light on the interactions between nanoparticles and lipid membranes by interface-sensitive vibrational spectroscopy

Nanoparticles are produced in natural phenomena or synthesized artificially for technological applications. Their frequent contact with humans has been judged potentially harmful for health, and numerous studies are ongoing to understand the mechanisms of the toxicity of nanoparticles. At the macroscopic level, the toxicity can be established in vitro or in vivo by measuring the survival of cells. At the sub-microscopic level, scientists want to unveil the molecular mechanisms of the first interactions of nanoparticles with cells via the cell membrane, before the toxicity cascades within the whole cell. Unveiling a molecular understanding of the nanoparticle-membrane interface is a tricky challenge, because of the chemical complexity of this system and its nanosized dimensions buried within bulk macroscopic environments. In this review, we highlight how, in the last 10 years, second-order nonlinear optical (NLO) spectroscopy, and specifically vibrational sum frequency generation (SFG), has provided a new understanding of the structural, physicochemical, and dynamic properties of these biological interfaces, with molecular sensitivity. We will show how the intrinsic interfacial sensitivity of second-order NLO and the chemical information of vibrational SFG spectroscopy have revealed new knowledge of the molecular mechanisms that drive nanoparticles to interact with cell membranes, from both sides, the nanoparticles and the membrane properties.

Synthesis and surface engineering of Ag chalcogenide quantum dots for near-infrared biophotonic applications

Quantum dots (QDs), a novel category of semiconductor materials, exhibit extraordinary capabilities in tuning optical characteristics. Their emergence in biophotonics has been noteworthy, particularly in bio-imaging, biosensing, and theranostics applications. Although conventional QDs such as PbS, CdSe, CdS, and HgTe have garnered attention for their promising features, the presence of heavy metals in these QDs poses significant challenges for biological use. To address these concerns, the development of Ag chalcogenide QDs has gained prominence owing to their near-infrared emission and exceptionally low toxicity, rendering them suitable for biological applications. This review explores recent advancements in Ag chalcogenide QDs, focusing on their synthesis methodologies, surface chemistry modifications, and wide-ranging applications in biomedicine. Additionally, it identifies future directions in material science, highlighting the potential of these innovative QDs in revolutionizing the field.

Amino-modified polystyrene nanoplastics induced multiple response of Artemia hemocytes

Polystyrene polymers cause severe toxicity to aquatic animals. However, the process and mechanisms of innate immunity of invertebrates living at the bottom of the food chain to these pollutants remain unclear. In this study, the blood system responses of zooplankton Artemia were assessed through in vivo and in vitro exposure to amino-modified polystyrene nanoplastics (PS-NH2 NPs). The results indicated that the LC50 values of PS-NH2 NPs were 1.09 μg·mL-1 over 48 h and 0.42 μg·mL-1 over 7 d. Based on the five hemocyte subpopulations identified in Artemia, in vitro exposure assays revealed that phagocytosis was performed by plasmocytes and granulocytes with phagocytic rate of 22.64 %. TEM analysis further showed that PS-NH2 NPs caused cytoplasm vacuolization, swollen mitochondria, and lipid processing disorder. Gene expression pattern results demonstrated that Spatzle, Tollip, Hsp70, Hsp90, Casp8, API5and Pxn were significantly upregulated upon acute and chronic exposure (p < 0.05), while chronic exposure could induce significantly upregulation of ProPO (p < 0.05). Moreover, PS-NH2 NPs exposure remarkably varied the hemolymph microbiota and hemogram, particularly by increasing the proportion of adipohemocytes and phagocytes (p < 0.05). Our findings suggest that PS-NH2 NPs induce different responses in Artemia hemocyte, as primarily reflected by phagocytic processes, expression of immune and apoptosis relating genes, cell fates, hemogram and hemolymph microbiota variations. These findings support the possibility of using Artemia hemocytes as bioindicator to estimate nanoplastics pollution, thus contributing to hematological toxicity research in response to nanoplastics.

Precise subcellular targeting approaches for organelle-related disorders

Pharmacological research has expanded to the nanoscale level with advanced imaging technologies, enabling the analysis of drug distribution at the cellular organelle level. These advances in research techniques have contributed to the targeting of cellular organelles to address the fundamental causes of diseases. Beyond navigating the hurdles of reaching lesion tissues upon administration and identifying target cells within these tissues, controlling drug accumulation at the organelle level is the most refined method of disease management. This approach opens new avenues for the development of more potent therapeutic strategies by delving into the intricate roles and interplay of cellular organelles. Thus, organelle-targeted approaches help overcome the limitations of conventional therapies by precisely regulating functionally compartmentalized spaces based on their environment. This review discusses the basic concepts of organelle targeting research and proposes strategies to target diseases arising from organelle dysfunction. We also address the current challenges faced by organelle targeting and explore future research directions.

Mechanochemistry: Fundamental Principles and Applications

Mechanochemistry is an emerging research field at the interface of physics, mechanics, materials science, and chemistry. Complementary to traditional activation methods in chemistry, such as heat, electricity, and light, mechanochemistry focuses on the activation of chemical reactions by directly or indirectly applying mechanical forces. It has evolved as a powerful tool for controlling chemical reactions in solid state systems, sensing and responding to stresses in polymer materials, regulating interfacial adhesions, and stimulating biological processes. By combining theoretical approaches, simulations and experimental techniques, researchers have gained intricate insights into the mechanisms underlying mechanochemistry. In this review, the physical chemistry principles underpinning mechanochemistry are elucidated and a comprehensive overview of recent significant achievements in the discovery of mechanically responsive chemical processes is provided, with a particular emphasis on their applications in materials science. Additionally, The perspectives and insights into potential future directions for this exciting research field are offered.

Designing antibacterial materials through simulation and theory

Antibacterial materials have a wide range of potential applications in bio-antimicrobial, environmental antimicrobial, and food antimicrobial fields due to their intrinsic antimicrobial properties, which can circumvent the development of drug resistance in bacteria. Understanding the intricate mechanisms and intrinsic nature of diverse antibacterial materials is significant for the formulation of guidelines for the design of materials with rapid and efficacious antimicrobial action and a high degree of biomedical material safety. Herein, this review highlights the recent advances in investigating antimicrobial mechanisms of different antibacterial materials with a particular focus on tailored computer simulations and theoretical analysis. From the view of structure and function, we summarize the characteristics and mechanisms of different antibacterial materials, introduce the latest advances of new antibacterial materials, and discuss the design concept and development direction of new materials. In addition, we underscore the significance of employing simulation and theoretical methodologies to elucidate the intrinsic antimicrobial mechanisms, which is crucial for a comprehensive comprehension of the control strategies, safer biomedical applications, and the management of health and environmental concerns associated with antibacterial materials. This review could potentially stimulate further endeavors in fundamental research and facilitate the extensive utilization of computational and theoretical approaches in the design of novel functional nanomaterials.

Biomimetic synthesis of nanoparticles: A comprehensive review on green synthesis of nanoparticles with a focus on Prosopis farcta plant extracts and biomedical applications

The synthesis of nanoparticles (NPs) using environmentally friendly methods has garnered significant attention in response to concerns about the environmental impact of various nanomaterial manufacturing techniques. To address this issue, natural resources like extracts from plants, fungi, and bacteria are employed as a green alternative for nanoparticle synthesis. Plant extracts, which contain active components such as terpenoids, alkaloids, phenols, tannins, and vitamins, operate as coating and reducing agents. Bacteria and fungi, on the other hand, rely on internal enzymes, sugar molecules, membrane proteins, nicotinamide adenine dinucleotide (NADH), and nicotinamide adenine dinucleotide phosphate (NADPH) dependent enzymes to play critical roles as reducing agents. This review collects recent advancements in biomimetic methods for nanoparticle synthesis, critically discussing the preparation approaches, the type of particles obtained, and their envisaged applications. A specific focus is given on using Prosopis fractal plant extracts to synthesize nanoparticles tailored for biomedical applications. The applications of this plant and its role in the biomimetic manufacturing of nanoparticles have not been reported yet, making this review a pioneering and valuable contribution to the field.

Patterned graphene oxide via one-step thermal annealing for controlling collective cell migration

Graphene oxide (GO) is a two-dimensional metastable nanomaterial. Interestingly, GO formed oxygen clusterings in addition to oxidized and graphitic phases during the low-temperature thermal annealing process, which could be further used for biomolecule bonding. By harnessing this property of GO, we created a bio-interface with patterned structures with a common laboratory hot plate that could tune cellular behavior by physical contact. Due to the regional distribution of oxygen clustering at the interface, we refer to it as patterned annealed graphene oxide (paGO). In addition, since the paGO was a heterogeneous interface and bonded biomolecules to varying degrees, arginine-glycine-aspartic acid (RGD) was modified on it and successfully regulated cellular-directed growth and migration. Finally, we investigated the FRET phenomenon of this heterogeneous interface and found that it has potential as a biosensor. The paGO interface has the advantages of easy regulation and fabrication, and the one-step thermal reduction method is suitable for biological applications. We believe that this low-temperature thermal annealing method would make GO interfaces more accessible, especially for the development of nano-interfacial modifications for biological applications, revealing its potential for biomedical applications.

A multifunctional protein pre-coated metal-organic framework for targeted delivery with deep tissue penetration

Targeted drug delivery using metal-organic frameworks (MOFs) has shown significant progress. However, the tumor microenvironment (TME) impedes efficient MOF particle transfer into tumor cells. To tackle this issue, we pre-coated nano-sized MOF-808 particles with multifunctional proteins: glutathione S-transferase (GST)-affibody (Afb) and collagenase, aiming to navigate the TME more effectively. The surface of MOF-808 particles is coated with GST-Afb-a fusion protein of GST and human epidermal growth factor receptor 2 (HER2) Afb or epidermal growth factor receptor (EGFR) Afb which has target affinity. We also added collagenase enzymes capable of breaking down collagen in the extracellular matrix (ECM) through supramolecular conjugation, all without chemical modification. By stabilizing these proteins on the surface, GST-Afb mitigate biomolecule absorption, facilitating specific tumor cell targeting. Simultaneously, collagenase degrades the ECM in the TME, enabling deep tissue penetration of MOF particles. Our resulting system, termed collagenase-GST-Afb-MOF-808 (Col-Afb-M808), minimizes undesired interactions between MOF particles and external biological proteins. It not only induces cell death through Afb-mediated cell-specific targeting, but also showcases advanced cellular internalization in 3D multicellular spheroid cancer models, with effective deep tissue penetration. The therapeutic efficacy of Col-Afb-M808 was further assessed via in vivo imaging and evaluation of tumor inhibition following injection of IR-780 loaded Col-Afb-M808 in 4T1tumor-bearing nude mice. This study offers key insights into the regulation of the multifunctional protein-adhesive surface of MOF particles, paving the way for the designing even more effective targeted drug delivery systems with nano-sized MOF particles.

Actively Targeting Redox-Responsive Multifunctional Micelles for Synergistic Chemotherapy of Cancer

Stimuli-responsive polymeric micelles decorated with cancer biomarkers represent an optimal choice for drug delivery applications due to their ability to enhance therapeutic efficacy while mitigating adverse side effects. Accordingly, we synthesized a digoxin-modified novel multifunctional redox-responsive disulfide-linked poly(ethylene glycol-b-poly(lactic-co-glycolic acid) copolymer (Bi(Dig-PEG-PLGA)-S2) for the targeted and controlled release of doxorubicin (DOX) in cancer cells. Within the micellar aggregate, the disulfide bond confers redox responsiveness, while the presence of the digoxin moiety acts as a targeting agent and chemosensitizer for DOX. Upon self-assembly in aqueous solution, Bi(Dig-PEG-PLGA)-S2 formed uniformly distributed spherical micelles with a hydrodynamic diameter (D h ) of 58.36 ± 0.78 nm and a zeta potential of -24.71 ± 1.01 mV. The micelles exhibited desirable serum and colloidal stability with a substantial drug loading capacity (DLC) of 6.26% and an encapsulation efficiency (EE) of 83.23%. In addition, the release of DOX demonstrated the redox-responsive behavior of the micelles, with approximately 89.41 ± 6.09 and 79.64 ± 6.68% of DOX diffusing from DOX@Bi(Dig-PEG-PLGA)-S2 in the presence of 10 mM GSH and 0.1 mM H2O2, respectively, over 96 h. Therefore, in HeLa cell lines, DOX@Bi(Dig-PEG-PLGA)-S2 showed enhanced intracellular accumulation and subsequent apoptotic effects, attributed to the targeting ability and chemosensitization potential of digoxin. Hence, these findings underscore the promising characteristics of Bi(Dig-PEG-PLGA)-S2 as a multifunctional drug delivery vehicle for cancer treatment.

Selective Tumor Inhibition Effect of Drug-Free Layered Double Hydroxide-Based Films via Responding to Acidic Microenvironment

Nickel-titanium alloy stents are widely used in the interventional treatment of various malignant tumors, and it is important to develop nickel-titanium alloy stents with selective cancer-inhibiting and antibacterial functions to avoid malignant obstruction caused by tumor invasion and bacterial colonization. In this work, an acid-responsive layered double hydroxide (LDH) film was constructed on the surface of a nickel-titanium alloy by hydrothermal treatment. The release of nickel ions from the film in the acidic tumor microenvironment induces an intracellular oxidative stress response that leads to cell death. In addition, the specific surface area of LDH nanosheets could be further regulated by heat treatment to modulate the release of nickel ions in the acidic microenvironment, allowing the antitumor effect to be further enhanced. This acid-responsive LDH film also shows a good antibacterial effect against S. aureus and E. coli. Besides, the LDH film prepared without the introduction of additional elements maintains low toxicity to normal cells in a normal physiological environment. This work offers some guidance for the design of a practical nickel-titanium alloy stent for the interventional treatment of tumors.

Enhanced repellent and anti-nutritional activities of polymeric nanoparticles containing essential oils against red flour beetle, Tribolium castaneum

Encapsulation of essential oils (EOs) is an important strategy that can be applied to intensify the stability and efficiency of these compounds in integrated pest management. The present study aimed to investigate the sub-lethal activity of polymer-based EOs nanoparticles against red flour beetle, Tribolium castaneum adults as an important critical pest of stored products. Chitosan nanoparticles (CSNPs) containing garlic and cinnamon essential oils (GEO and CEO) prepared using the ionic cross-link technique. Stability of nano-formulations evaluated over temperature and storage time. The fumigant effect (LC10, LC20, LC30) and contact toxicity (LC10, LC15, LC25) determined. In addition, the contact toxicities of EOs and their nanoparticles on nutritional indices evaluated. An olfactometer used to assess the repellent activity of EOs and EOs loaded in CSNPs (EOs@CSNPs) in sub-lethal fumigant concentrations. Characterization results showed GEO loaded in CSNPs has particle size of 231.14 ± 7.55 nm, polydispersity index (PDI) value of 0.15 ± 0.02, encapsulation efficiency (EE) percentage of 76.77 ± 0.20 and zeta potential of - 18.82 ± 0.90 mV, in which these values for the CEO loaded in CSNPs (CEO@CSNPs) changed to 303.46 ± 0.00 nm, 0.20 ± 0.05, 86.81 ± 0.00% and - 20.16 ± 0.35 mV, respectively. A lower PDI value for both CSNPs showed an appropriate NPs size distribution. Furthermore, NPs size and encapsulation efficiency did not change in various temperatures and during four months which confirm good stability of the EOs@CSNPs. In LC30 of GEO@CSNPs, the maximum repellency was determined as 66.66 ± 3.33. Among nutritional indices, in LC25 of GEO@CSNPs, the relative growth rate (RGR) (0.011 ± 0.003 mg.mg-1.day-1), relative consumption rate (RCR) (0.075 ± 0.004 mg.mg-1.day-1) and feeding deterrence index (FDI) (54.662 ± 1.616%) were more affected, so GEO@CSNPs was more effective than CEO@CSNPs. The results of repellent and anti-dietary activities of EOs and EOs@CSNPs confirmed the higher repellency and adverse effectivity on nutritional indices of Tribolium castaneum pest treated with EOs@CSNPs compared to free EOs. In conclusion, the NPs form of GEO and CEO can be a novel and efficient carrier for improving the repellent and anti-nutritional activities of EOs.

Specific buffer effects on the formation of BSA protein corona around amino-functionalized mesoporous silica nanoparticles

The effect of buffer species on biomolecules and biomolecule-nanoparticle interactions is a phenomenon that has been either neglected, or not understood. Here, we study the formation of a BSA protein corona (PC) around amino-functionalized mesoporous silica nanoparticles (MSN-NH2) in the presence of different buffers (Tris, BES, cacodylate, phosphate, and citrate) at the same pH (7.15) and different concentrations (10, 50, and 100 mM). We find that BSA adsorption is buffer specific, with the adsorbed amount of BSA being 4.4 times higher in the presence of 100 mM Tris (184 ± 3 mg/g) than for 100 mM citrate (42 ± 2 mg/g). That is a considerable difference that cannot be explained by conventional theories. The results become clearer if the interaction energies between BSA and MSN-NH2, considering the electric double layer (EEDL) and the van der Waals (EvdW) terms, are evaluated. The buffer specific PC derives from buffer specific zeta potentials that, for MSN-NH2, are positive with Tris and negative with citrate buffers. A reversed sign of zeta potentials can be obtained by considering polarizability-dependent dispersion forces acting together with electrostatics to give the buffer specific outcome. These results are relevant not only to our understanding of the formation of the PC but may also apply to other bio- and nanosystems in biological media.

Systematic review of mechanistic evidence for TiO2 nanoparticle-induced lung carcinogenicity

Nano-sized titanium dioxide particles (TiO2 NPs) are a high-production volume nanomaterial widely used in the paints, cosmetics, food and photovoltaics industry. However, the potential carcinogenic effects of TiO2 NPs in the lung are still unclear despite the vast number of in vitro and in vivo studies investigating TiO2 NPs. Here, we systematically reviewed the existing in vitro and in vivo mechanistic evidence of TiO2 NP lung carcinogenicity using the ten key characteristics of carcinogens for identifying and classifying carcinogens. A total of 346 studies qualified for the quality and reliability assessment, of which 206 were considered good quality. Using a weight-of-evidence approach, these studies provided mainly moderate to high confidence for the biological endpoints regarding genotoxicity, oxidative stress and chronic inflammation. A limited number of studies investigated other endpoints important to carcinogenesis, relating to proliferation and transformation, epigenetic alterations and receptor-mediated effects. In summary, TiO2 NPs might possess the ability to induce chronic inflammation and oxidative stress, but it was challenging to compare the findings in the studies due to the wide variety of TiO2 NPs differing in their physicochemical characteristics, formulation, exposure scenarios/test systems, and experimental protocols. Given the limited number of high-quality and high-reliability studies identified within this review, there is a lack of good enough mechanistic evidence for TiO2 NP lung carcinogenicity. Future toxicology/carcinogenicity research must consider including positive controls, endotoxin testing (where necessary), statistical power analysis, and relevant biological endpoints, to improve the study quality and provide reliable data for evaluating TiO2 NP-induced lung carcinogenicity.

Antioxidant-related enzymes and peptides as biomarkers of metallic nanoparticles (eco)toxicity in the aquatic environment

Increased awareness of the impact of human activities on the environment has emerged in recent decades. One significant global environmental and human health issue is the development of materials that could potentially have negative effects. These materials can accumulate in the environment, infiltrate organisms, and move up the food chain, causing toxic effects at various levels. Therefore, it is crucial to assess materials comprising nano-scale particles due to the rapid expansion of nanotechnology. The aquatic environment, particularly vulnerable to waste pollution, demands attention. This review provides an overview of the behavior and fate of metallic nanoparticles (NPs) in the aquatic environment. It focuses on recent studies investigating the toxicity of different metallic NPs on aquatic organisms, with a specific emphasis on thiol-biomarkers of oxidative stress such as glutathione, thiol- and related-enzymes, and metallothionein. Additionally, the selection of suitable measurement methods for monitoring thiol-biomarkers in NPs' ecotoxicity assessments is discussed. The review also describes the analytical techniques employed for determining levels of oxidative stress biomarkers.

Understanding Nanoscale Interactions between Minerals and Microbes: Opportunities for Green Remediation of Contaminated Sites

In situ contaminant degradation and detoxification mediated by microbes and minerals is an important element of green remediation. Improved understanding of microbe-mineral interactions on the nanoscale offers promising opportunities to further minimize the environmental and energy footprints of site remediation. In this Perspective, we describe new methodologies that take advantage of an array of multidisciplinary tools─including multiomics-based analysis, bioinformatics, machine learning, gene editing, real-time spectroscopic and microscopic analysis, and computational simulations─to identify the key microbial drivers in the real environments, and to characterize in situ the dynamic interplay between minerals and microbes with high spatiotemporal resolutions. We then reflect on how the knowledge gained can be exploited to modulate the binding, electron transfer, and metabolic activities at the microbe-mineral interfaces, to develop new in situ contaminant degradation and detoxication technologies with combined merits of high efficacy, material longevity, and low environmental impacts. Two main strategies are proposed to maximize the synergy between minerals and microbes, including using mineral nanoparticles to enhance the versatility of microorganisms (e.g., tolerance to environmental stresses, growth and metabolism, directed migration, selectivity, and electron transfer), and using microbes to synthesize and regenerate highly dispersed nanostructures with desired structural/surface properties and reactivity.

Opportunities for nanomaterials in enzyme therapy

In recent years, enzyme therapy strategies have rapidly evolved to catalyze essential biochemical reactions with therapeutic potential. These approaches hold particular promise in addressing rare genetic disorders, cancer treatment, neurodegenerative conditions, wound healing, inflammation management, and infectious disease control, among others. There are several primary reasons for the utilization of enzymes as therapeutics: their substrate specificity, their biological compatibility, and their ability to generate a high number of product molecules per enzyme unit. These features have encouraged their application in enzyme replacement therapy where the enzyme serves as the therapeutic agent to rectify abnormal metabolic and physiological processes, enzyme prodrug therapy where the enzyme initiates a clinical effect by activating prodrugs, and enzyme dynamic or starving therapy where the enzyme acts upon host substrate molecules. Currently, there are >20 commercialized products based on therapeutic enzymes, but approval rates are considerably lower than other biologicals. This has stimulated nanobiotechnology in the last years to develop nanoparticle-based solutions that integrate therapeutic enzymes. This approach aims to enhance stability, prevent rapid clearance, reduce immunogenicity, and even enable spatio-temporal activation of the therapeutic catalyst. This comprehensive review delves into emerging trends in the application of therapeutic enzymes, with a particular emphasis on the synergistic opportunities presented by incorporating enzymes into nanomaterials. Such integration holds the promise of enhancing existing therapies or even paving the way for innovative nanotherapeutic approaches.

Effects of Histidine Oligomers in Lipid Nanoparticles on siRNA Delivery

In this study, histidine oligomer (oHis; 10mer)-incorporating LNPs (H10LNPs) are developed as a novel carrier for efficient siRNA delivery. Notably, the unmodified oHis (10mer) is greatly incorporated within LNPs through ionic interaction with siRNAs, which serves as an endosome escape enhancer. H10LNPs with a size of ≈65 nm demonstrate a significantly enhanced extent of endosomal escape, as evidenced by calcein assay and confocal microscopy images of intracellular fluorescence, surpassing conventional LNPs. Furthermore, the half inhibitory concentration (IC50) of the human endogenous globotriaosylceramide synthase (Gb3 synthase) gene in H10LNPs-treated cells exhibits a significant threefold decrease, compared to that in LNP-treated cells. Notably, H10LNPs maintain comparable biocompatibility and biodistribution both in vitro and in vivo. Considering that the fabricated siRNA H10LNPs exhibit excellent biocompatibility and superior gene silencing activity over conventional LNPs, these particles can be harnessed for the safe delivery of therapeutic siRNAs. Additionally, this study introduces promising, feasible, simple, and alternative formulation processes for integrating unmodified functional cationic peptides into LNPs to enhance the delivery efficiency of a wide range of nucleic acid-based drugs.

A comprehensive investigation of the interactions of human serum albumin with polymeric and hybrid nanoparticles

Nanoparticles (NPs) engineered as drug delivery systems continue to make breakthroughs as they offer numerous advantages over free therapeutics. However, the poor understanding of the interplay between the NPs and biomolecules, especially blood proteins, obstructs NP translation to clinics. Nano-bio interactions determine the NPs' in vivo fate, efficacy and immunotoxicity, potentially altering protein function. To fulfill the growing need to investigate nano-bio interactions, this study provides a systematic understanding of two key aspects: (i) protein corona (PC) formation and (ii) NP-induced modifications on protein's structure and stability. A methodology was developed by combining orthogonal techniques to analyze both quantitative and qualitative aspects of nano-bio interactions, using human serum albumin (HSA) as a model protein. Protein quantification via liquid chromatography-mass spectrometry, and capillary zone electrophoresis (CZE) clarified adsorbed protein quantity and stability. CZE further unveiled qualitative insights into HSA forms (native, glycated HSA and cysteinylated), while synchrotron radiation circular dichroism enabled analyzing HSA's secondary structure and thermal stability. Comparative investigations of NP cores (organic vs. hybrid), and shells (with or without polyethylene glycol (PEG)) revealed pivotal factors influencing nano-bio interactions. Polymeric NPs based on poly(lactic-co-glycolic acid) (PLGA) and hybrid NPs based on metal-organic frameworks (nanoMOFs) presented distinct HSA adsorption profiles. PLGA NPs had protein-repelling properties while inducing structural modifications on HSA. In contrast, HSA exhibited a high affinity for nanoMOFs forming a PC altering thereby the protein structure. A shielding effect was gained through PEGylation for both types of NPs, avoiding the PC formation as well as the alteration of unbound HSA structure.

Silk fibroin as a surfactant for water-based nanofabrication

Water-based processing plays a crucial role in high technology, especially in electronics, material sciences and life sciences, with important implications in the development of high-quality reliable devices, fabrication efficiency, safety and sustainability. At the micro- and nanoscale, water is uniquely enabling as a bridge between biological and technological systems. However, new approaches are needed to overcome fundamental challenges that arise from the high surface tension of water, which hinders wetting and, thus, fabrication at the bio-nano interface. Here we report the use of silk fibroin as a surfactant to enable water-based processing of nanoscale devices. Even in minute quantities (for example, 0.01 w/v%), silk fibroin considerably enhances surface coverage and outperforms commercial surfactants in precisely controlling interfacial energy between water-based solutions and hydrophobic surfaces. This effect is ascribed to the amphiphilic nature of the silk molecule and its adaptive adsorption onto substrates with diverse surface energy, facilitating intermolecular interactions between unlikely pairs of materials. The approach's versatility is highlighted by manufacturing water-processed nanodevices, ranging from transistors to photovoltaic cells. Its performance is found to be equivalent to analogous vacuum-processed devices, underscoring the utility and versatility of this approach for water-based nanofabrication.

Carbon Nanodot-Microbe-Plant Nexus in Agroecosystem and Antimicrobial Applications

The intensive applications of nanomaterials in the agroecosystem led to the creation of several environmental problems. More efforts are needed to discover new insights in the nanomaterial-microbe-plant nexus. This relationship has several dimensions, which may include the transport of nanomaterials to different plant organs, the nanotoxicity to soil microbes and plants, and different possible regulations. This review focuses on the challenges and prospects of the nanomaterial-microbe-plant nexus under agroecosystem conditions. The previous nano-forms were selected in this study because of the rare, published articles on such nanomaterials. Under the study's nexus, more insights on the carbon nanodot-microbe-plant nexus were discussed along with the role of the new frontier in nano-tellurium-microbe nexus. Transport of nanomaterials to different plant organs under possible applications, and translocation of these nanoparticles besides their expected nanotoxicity to soil microbes will be also reported in the current study. Nanotoxicity to soil microbes and plants was investigated by taking account of morpho-physiological, molecular, and biochemical concerns. This study highlights the regulations of nanotoxicity with a focus on risk and challenges at the ecological level and their risks to human health, along with the scientific and organizational levels. This study opens many windows in such studies nexus which are needed in the near future.

Drug-loaded nanoparticles for cancer therapy: a high-throughput multicellular agent-based modeling study

Interactions between biological systems and engineered nanomaterials have become an important area of study due to the application of nanomaterials in medicine. In particular, the application of nanomaterials for cancer diagnosis or treatment presents a challenging opportunity due to the complex biology of this disease spanning multiple time and spatial scales. A system-level analysis would benefit from mathematical modeling and computational simulation to explore the interactions between anticancer drug-loaded nanoparticles (NPs), cells, and tissues, and the associated parameters driving this system and a patient's overall response. Although a number of models have explored these interactions in the past, few have focused on simulating individual cell-NP interactions. This study develops a multicellular agent-based model of cancer nanotherapy that simulates NP internalization, drug release within the cell cytoplasm, "inheritance" of NPs by daughter cells at cell division, cell pharmacodynamic response to the intracellular drug, and overall drug effect on tumor dynamics. A large-scale parallel computational framework is used to investigate the impact of pharmacokinetic design parameters (NP internalization rate, NP decay rate, anticancer drug release rate) and therapeutic strategies (NP doses and injection frequency) on the tumor dynamics. In particular, through the exploration of NP "inheritance" at cell division, the results indicate that cancer treatment may be improved when NPs are inherited at cell division for cytotoxic chemotherapy. Moreover, smaller dosage of cytostatic chemotherapy may also improve inhibition of tumor growth when cell division is not completely inhibited. This work suggests that slow delivery by "heritable" NPs can drive new dimensions of nanotherapy design for more sustained therapeutic response.

Thin Film Formation of HSA in the Presence of CTAB-Capped Gold Nanorods through Phase Separation

Phase behavior in protein-nanoparticle systems in light of protein corona formation has been investigated. We report the formation of HSA thin films following the addition of a solid protein to a solution of CTAB-capped gold nanorods (AuNRs) via phase separation. The phase separation behavior was observed through UV-vis spectroscopy, turbidity assays, and DLS studies. UV-vis spectra for the protein-AuNR solution indicated a possible self-assembly formation by CTAB-HSA complexes and AuNR-HSA conjugates. The turbidity was found to increase linearly up to 30-50% v/v for each component. The growth phase slope is proportional to the concentration of the components, AuNRs, and HSA, with no lag phase. Dynamic light scattering (DLS) shows the formation of larger aggregates with time, implying a segregated phase of AuNR-HSA and a CTAB-HSA-AuNR network. ζ-potential values confirm surface modification, implying protein corona formation on nanorods. The thin films were also characterized using SEM, AFM, SAXS, XPS, FTIR, and TGA studies. SEM images show a smooth surface with a reduced number of pores, indicating the compactness of the deposited structure. AFM shows two different structural pattern formations with the deposition, indicating possible self-assembly of the protein-conjugated nanoparticles. FTIR studies indicate a change in the hydrogen bonding network and confirm the CTAB-HSA-AuNR complex network formation. The XPS studies indicate Au-S bond formation, along with Au-S-S-Au interactions. SAXS studies indicate the formation of aggregates (oligomers), as well as the presence of dominant attractive intermolecular interactions in the thin films.

Microscopic Characterization of Individual Aerosol Particles in a Typical Industrial City and Its Surrounding Rural Areas in China

Transmission electron microscopy was used to analyze individual aerosol particles collected in Lanzhou (urban site) and its surrounding areas (rural site) in early 2023. The results revealed that from the pre-Spring Festival period to the Spring Festival period, the main pollutants at the urban site decreased significantly, while the PM2.5 and SO2 concentrations increased at the rural site. During the entire sampling period, the main particles at the urban site were organic matter (OM), secondary inorganic aerosols (SIA), and OM-SIA particles, while those at the rural site were OM, SIA, and soot particles. The degree of external mixing of single particles in both sites increased from the pre-Spring Festival period to the Spring Festival period. The proportion of the OM particles increased by 11% at the urban site, and the proportion of SIA particles increased by 24% at the rural site. During the Spring Festival, the aging of the soot particles was enhanced at the urban site and weakened at the rural site. At the urban site, the SIA particle size was more strongly correlated with the thickness of the OM coating during the pre-Spring Festival period, while the correlation was stronger at the rural site during the Spring Festival.

Surface functionalization, particle size and pharmaceutical co-contaminant dependent impact of nanoplastics on marine crustacean - Artemia salina

Despite a significant amount of research on micronanoplastics (MNPs), there is still a gap in our understanding of their function as transporters of other environmental pollutants (known as the Trojan horse effect) and the combined effects of ingestion, bioaccumulation, and toxicity to organisms. This study examined the individual effects of polystyrene nanoplastics (PSNPs) with various surface functionalizations (plain (PS), carboxylated (PS-COOH), and aminated (PS-NH2)), particle sizes (100 nm and 500 nm), and a pharmaceutical co-contaminant (metformin hydrochloride (MH), an anti-diabetic drug) on the marine crustacean - Artemia salina. The study specifically aimed to determine if MH alters the detrimental effects of PSNPs on A. salina. The potential toxicity of these emerging pollutants was assessed by examining mortality, hatching rate, morphological changes, and biochemical changes. Smaller nanoparticles had a more significant impact than larger ones, and PS-NH2 was more harmful than PS and PS-COOH. Exposure to the nanoparticle complex with MH resulted in a decrease in hatching rate, an increase in mortality, developmental abnormalities, an increase in reactive oxygen species, catalase, and lipid peroxidase, and a decrease in total protein and superoxide dismutase, indicating a synergistic effect. There were no significant differences between the complex and the individual nanoparticles. However, accumulating these particles in organisms could contaminate the food chain. These results highlight the potential environmental risks associated with the simultaneous exposure of aquatic species to plastics, particularly smaller PS, aminated PS, and pharmaceutical complex PS.

Fine-Tuning Electron Transfer for Nanozyme Design

Nanozymes, with their versatile composition and structural adaptability, present distinct advantages over natural enzymes including heightened stability, customizable catalytic activity, cost-effectiveness, and simplified synthesis process, making them as promising alternatives in various applications. Recent advancements in nanozyme research have shifted focus from serendipitous discovery toward a more systematic approach, leveraging machine learning, theoretical calculations, and mechanistic explorations to engineer nanomaterial structures with tailored catalytic functions. Despite its pivotal role, electron transfer, a fundamental process in catalysis, has often been overlooked in previous reviews. This review comprehensively summarizes recent strategies for modulating electron transfer processes to fine-tune the catalytic activity and specificity of nanozymes, including electron-hole separation and carrier transfer. Furthermore, the bioapplications of these engineered nanozymes, including antimicrobial treatments, cancer therapy, and biosensing are also introduced. Ultimately, this review aims to offer invaluable insights for the design and synthesis of nanozymes with enhanced performance, thereby advancing the field of nanozyme research.

Engineered nanomaterials exert sublethal bacterial stress at very low doses: Effects of concentration, light, and media on cell membrane permeability

Engineered nanomaterials (ENMs) can alter surface properties of cells and disturb cellular functions and gene expression through direct and indirect contact, exerting unintended impacts on human and ecological health. However, the effects of interactions among environmental factors, such as light, surrounding media, and ENM mixtures, on the mechanisms of ENM toxicity, especially at sublethal concentrations, are much less explored and understood. Therefore, we evaluated cell viability and outer membrane permeability of E. coli as a function of exposure to environmentally relevant concentrations of ENMs, including metal (n-Ag) and metal oxide (n-TiO2, n-Al2O3, n-ZnO, n-CuO, and n-SiO2) nanoparticles under dark and simulated sunlight illumination in MOPS, a synthetic buffer, and Lake Michigan Water (LMW), a freshwater medium. We found that light activates the phototoxicity of n-TiO2 and n-Ag by inducing significant increases in bacterial outer membrane permeability at sublethal doses (< 1 mg/L). Other ENMs, including n-ZnO, n-CuO, n-Al2O3, and n-SiO2, have small to minimal impacts. Toxicities of ENMs were greater in LMW than MOPS due to their different ionic strength and chemical composition. Physical and chemical interactions between n-TiO2 and n-Ag lead to amplified toxic effects of the ENM mixtures that are greater than the additive effects of individual ENMs acting alone. Our results revealed the significant sublethal bacterial stress exerted by ENMs and ENM mixtures at the cell surface in natural environments at low doses, which can potentially lead to further cellular damage and eventually impact overall ecological health.

Engineering Exosomes for Therapeutic Applications: Decoding Biogenesis, Content Modification, and Cargo Loading Strategies

Exosomes emerge from endosomal invagination and range in size from 30 to 200 nm. Exosomes contain diverse proteins, lipids, and nucleic acids, which can indicate the state of various physiological and pathological processes. Studies have revealed the remarkable clinical potential of exosomes in diagnosing and prognosing multiple diseases, including cancer, cardiovascular disorders, and neurodegenerative conditions. Exosomes also have the potential to be engineered and deliver their cargo to a specific target. However, further advancements are imperative to optimize exosomes' diagnostic and therapeutic capabilities for practical implementation in clinical settings. This review highlights exosomes' diagnostic and therapeutic applications, emphasizing their engineering through simple incubation, biological, and click chemistry techniques. Additionally, the loading of therapeutic agents onto exosomes, utilizing passive and active strategies, and exploring hybrid and artificial exosomes are discussed.

Systemic Administration of Neurotransmitter-Derived Lipidoids-PROTACs-DNA Nanocomplex Promotes Tau Clearance and Cognitive Recovery for Alzheimer's Disease Therapy

Alzheimer's disease (AD) poses a significant burden on the economy and healthcare systems worldwide. Although the pathophysiology of AD remains debatable, its progression is strongly correlated with the accumulation of tau aggregates. Therefore, tau clearance from brain lesions can be a promising strategy for AD therapy. To achieve this, the present study combined proteolysis-targeting chimera (PROTAC), a novel protein-degradation technique that mediates degradation of target proteins via the ubiquitin-proteasome system, and a neurotransmitter-derived lipidoid (NT-lipidoid) nanoparticle delivery system with high blood-brain barrier-penetration activity, to generate a novel nanomedicine named NPD. Peptide 1, a cationic tau-targeting PROTAC is loaded onto the positively charged nanoparticles using DNA-intercalation technology. The resulting nanomedicine displayed good encapsulation efficiency, serum stability, drug release profile, and blood-brain barrier-penetration capability. Furthermore, NPD potently induced tau clearance in both cultured neuronal cells and the brains of AD mice. Moreover, intravenous injection of NPD led to a significant improvement in the cognitive function of the AD mice, without any remarkable abnormalities, thereby supporting its clinical development. Collectively, the novel nanomedicine developed in this study may serve as an innovative strategy for AD therapy, since it effectively and specifically induces tau protein clearance in brain lesions, which in turn enhances cognition.

Deciphering the Mechanisms and Biotechnological Implications of Nanoparticle Synthesis Through Microbial Consortia

Nanomaterial synthesis is a growing study area because of its extensive range of uses. Nanoparticles' high surface-to-volume ratio and rapid interaction with various particles make them appealing for diverse applications. Traditional physical and chemical methods for creating metal nanoparticles are becoming outdated because they involve complex manufacturing processes, high energy consumption, and the formation of harmful by-products that pose major dangers to human health and the environment. Therefore, there is an increasing need to find alternative, cost-effective, dependable, biocompatible, and environmentally acceptable ways of producing nanoparticles. The process of synthesizing nanoparticles using microbes has become highly intriguing because of their ability to create nanoparticles of varying sizes, shapes, and compositions, each with unique physicochemical properties. Microbes are commonly used in nanoparticle production because they are easy to work with, can use low-cost materials, such as agricultural waste, are cheap to scale up, and can adsorb and reduce metal ions into nanoparticles through metabolic activities. Biogenic synthesis of nanoparticles provides a clean, nontoxic, ecologically friendly, and sustainable method using renewable ingredients for reducing metals and stabilizing nanoparticles. Nanomaterials produced by bacteria can serve as an effective pollution control method due to their many functional groups that can effectively target contaminants for efficient bioremediation, aiding in environmental cleanup. At the end of the paper, we will discuss the obstacles that hinder the use of biosynthesized nanoparticles and microbial-based nanoparticles. The paper aims to explore the sustainability of microorganisms in the burgeoning field of green nanotechnology.

From bone to nanoparticles: development of a novel generation of bone derived nanoparticles for image guided orthopedic regeneration

Bone related diseases such as osteoporosis, osteoarthritis, metastatic bone cancer, osteogenesis imperfecta, and Paget's disease, are primarily treated with pharmacologic therapies that often exhibit limited efficacy and substantial side effects. Bone injuries or fractures are primarily repaired with biocompatible materials that produce mixed results in sufficiently regenerating healthy and homogenous bone tissue. Each of these bone conditions, both localized and systemic, use different strategies with the same goal of achieving a healthy and homeostatic bone environment. In this study, we developed a new type of bone-based nanoparticle (BPs) using the entire organic extracellular matrix (ECM) of decellularized porcine bone, additionally encapsulating indocyanine green dye (ICG) for an in vivo monitoring capability. Utilizing the regenerative capability of bone ECM and the functionality of nanoparticles, the ICG encapsulated BPs (ICG/BPs) have been demonstrated to be utilized as a therapeutic option for localized and systemic orthopedic conditions. Additionally, ICG enables an in situ monitoring capability in the Short-Wave Infrared (SWIR) spectrum, capturing the degradation or the biodistribution of the ICG/BPs after both local implantation and intravenous administration, respectively. The efficacy and safety of the ICG/BPs shown within this study lay the foundation for future investigations, which will delve into optimization for clinical translation.

Concepts and Approaches to Reduce or Avoid Protein Corona Formation on Nanoparticles: Challenges and Opportunities

This review describes the formation of a protein corona (or its absence) on different classes of nanoparticles, its basic principles, and its consequences for nanomedicine. For this purpose, it describes general concepts to control (guide/minimize) the interaction between artificial nanoparticles and plasma proteins to reduce protein corona formation. Thereafter, methods for the qualitative or quantitative determination of protein corona formation are presented, as well as the properties of nanoparticle surfaces, which are relevant for protein corona prevention (or formation). Thereby especially the role of grafting density of hydrophilic polymers on the surface of the nanoparticle is discussed to prevent the formation of a protein corona. In this context also the potential of detergents (surfactants) for a temporary modification as well as grafting-to and grafting-from approaches for a permanent modification of the surface are discussed. The review concludes by highlighting several promising avenues. This includes (i) the use of nanoparticles without protein corona for active targeting, (ii) the use of synthetic nanoparticles without protein corona formation to address the immune system, (iii) the recollection of nanoparticles with a defined protein corona after in vivo application to sample the blood proteome and (iv) further concepts to reduce protein corona formation.

Targeting macrophages with multifunctional nanoparticles to detect and prevent atherosclerotic cardiovascular disease

Despite the emergence of novel diagnostic, pharmacological, interventional, and prevention strategies, atherosclerotic cardiovascular disease remains a significant cause of morbidity and mortality. Nanoparticle (NP)-based platforms encompass diverse imaging, delivery, and pharmacological properties that provide novel opportunities for refining diagnostic and therapeutic interventions for atherosclerosis at the cellular and molecular levels. Macrophages play a critical role in atherosclerosis and therefore represent an important disease-related diagnostic and therapeutic target, especially given their inherent ability for passive and active NP uptake. In this review, we discuss an array of inorganic, carbon-based, and lipid-based NPs that provide magnetic, radiographic, and fluorescent imaging capabilities for a range of highly promising research and clinical applications in atherosclerosis. We discuss the design of NPs that target a range of macrophage-related functions such as lipoprotein oxidation, cholesterol efflux, vascular inflammation, and defective efferocytosis. We also provide examples of NP systems that were developed for other pathologies such as cancer and highlight their potential for repurposing in cardiovascular disease. Finally, we discuss the current state of play and the future of theranostic NPs. Whilst this is not without its challenges, the array of multifunctional capabilities that are possible in NP design ensures they will be part of the next frontier of exciting new therapies that simultaneously improve the accuracy of plaque diagnosis and more effectively reduce atherosclerosis with limited side effects.

Characterization of Gold-Enhanced Titania: Boosting Cell Proliferation and Combating Bacterial Infestation

BACKGROUND

In this study an approach was made to efficaciously synthesize gold enhanced titania nanorods by electrospinning. This study aims to address effects of gold enhanced titania nanorods on muscle precursor cells. Additionally, implant related microbial infections are prime cause of various disastrous diseases. So, there is predictable demand for synthesis of novel materials with multifunctional adaptability.

METHODS

Herein, gold nanoparticles were attached on titania nanorods and described using many sophisticated procedures such as XRD, SEM, EDX and TEM. Antimicrobial studies were probed against Gram-negative Escherichia coli. C2C12 cell lines were exposed to various doses of as-prepared gold enhanced titania nanorods in order to test in vitro cytotoxicity and proliferation. Cell sustainability was assessed through Cell Counting Kit-8 assay at regular intervals. A phase-contrast microscope was used to examine morphology of exposed C2C12 cells and confocal laser scanning microscope was used to quantify cell viability.

RESULTS

The findings indicate that titania nanorods enhanced with gold exhibit superior antimicrobial efficacy compared to pure titania. Furthermore, newly synthesized gold-enhanced titania nanorods illustrate that cell viability follows a time and concentration dependent pattern.

CONCLUSION

Consequently, our study provides optimistic findings indicating that titania nanorods adorned with gold hold significant potential as foundational resource for developing forthcoming antimicrobial materials, suitable for applications both in medical and biomedical fields. This work also demonstrates that in addition to being extremely biocompatible, titania nanorods with gold embellishments may be used in a range of tissue engineering applications in very near future.

Development of nanomedicines for the treatment of Alzheimer's disease: Raison d'être, strategies, challenges and regulatory aspects

Alzheimer's disease (AD) is a chronic neurodegenerative disorder characterized by progressive loss of memory. Presently, AD is challenging to treat with current drug therapy as their delivery to the brain is restricted by the presence of the blood-brain barrier. Nanomedicines, due to their size, high surface volume ratio, and ease of tailoring drug release characteristics, showed their potential to treat AD. The nanotechnology-based formulations for brain targeting are expected to enter the market in the near future. So, regulatory frameworks are required to ensure the quality, safety, and effectiveness of the nanomedicines to treat AD. In this review, we discuss different strategies, in-vitro blood-brain permeation models, in-vivo permeation assessment, and regulatory aspects for the development of nanomedicine to treat AD.

On the Structure, Stability, and Cell Uptake of Nanostructured Lipid Carriers for Drug Delivery

The efficacy of nanostructured lipid carriers (NLC) for drug delivery strongly depends on their stability and cell uptake. Both properties are governed by their compositions and internal structure. To test the effect of the lipid composition of NLC on cell uptake and stability, three kinds of liquid lipids with different degrees of unsaturation are employed. After ensuring homogeneous size distributions, the thermodynamic characteristics, stability, and mixing properties of NLC are characterized. Then the rates and predominant pathways of cell uptake are determined. Although the same surfactant is used in all cases, different uptake rates are observed. This finding contradicts the view that the surface properties of NLC are dominated by the surfactant. Instead, the uptake rates are explained by the structure of the nanocarrier. Depending on the mixing properties, some liquid lipids remain inside the nanocarrier, while other liquid lipids are present on the surface. Nanocarriers with liquid lipids on the surface are taken up more readily by the cells. This shows that the engineering of efficient lipid nanocarriers requires a delicate balance of interactions between all components of the nanocarrier on the molecular level.

Comparative effects of polyvinyl chloride microplastics on the brittle star Ophiactis virens and the amphibian Xenopus laevis

In this study, we investigated the effects of PVC microplastics (PVC-MPs) using two different animal models: the brittle star Ophiactis virens, and the African clawed frog Xenopus laevis. This is the first study using an environmental relevant sample of PVC-MPs obtained through mechanical fragmentation of a common PVC plumbing pipe. Exposure experiments on brittle star were performed on the adult stage for a duration of 14 days, while those on African clawed frog were performed on the embryogenic developmental stage according to the standardized FETAX protocol (Frog Embryo Teratogenesis Assay-Xenopus). For both models, different endpoints were analysed: mortality, developmental parameters, behavioural assays and histological analyses on target organs by optical and electronic microscopy. Results showed that the concentration of 0.1 μg mL-1 PVC do not cause any adverse effects in both models (common NOEC concentration), while exposure to 1 μg mL-1 PVC adversely affected at least one species (common LOEC concentration). In particular arm regeneration efficiency was the most affected parameters in O. virens leading to a significantly lower differentiation pattern at 1 μg mL-1 PVC. On the contrary, in X. laevis larvae histopathological analyses and behavioural tests were the most susceptible endpoints, exhibiting several abnormal figures and different swimming speed at 10 μg mL-1 PVC. Histopathological analyses revealed a higher abundance of degenerating cells, pyknotic nuclei and cellular debris in the gut of exposed larvae in respect to control. The comparative analyses performed in this work allowed to characterize the specificity of action of the PVC-MPs on the two species, underlining the importance of exploring a large spectrum of endpoints to offer adequate protection in the emerging fields of microplastic research.

Nanoliposomes as nonviral vectors in cancer gene therapy

Nonviral vectors, such as liposomes, offer potential for targeted gene delivery in cancer therapy. Liposomes, composed of phospholipid vesicles, have demonstrated efficacy as nanocarriers for genetic tools, addressing the limitations of off-targeting and degradation commonly associated with traditional gene therapy approaches. Due to their biocompatibility, stability, and tunable physicochemical properties, they offer potential in overcoming the challenges associated with gene therapy, such as low transfection efficiency and poor stability in biological fluids. Despite these advancements, there remains a gap in understanding the optimal utilization of nanoliposomes for enhanced gene delivery in cancer treatment. This review delves into the present state of nanoliposomes as carriers for genetic tools in cancer therapy, sheds light on their potential to safeguard genetic payloads and facilitate cell internalization alongside the evolution of smart nanocarriers for targeted delivery. The challenges linked to their biocompatibility and the factors that restrict their effectiveness in gene delivery are also discussed along with exploring the potential of nanoliposomes in cancer gene therapy strategies by analyzing recent advancements and offering future directions.

Molecular Dynamic Simulations for Biopolymers with Biomedical Applications

Computational modeling (CM) is a versatile scientific methodology used to examine the properties and behavior of complex systems, such as polymeric materials for biomedical bioengineering. CM has emerged as a primary tool for predicting, setting up, and interpreting experimental results. Integrating in silico and in vitro experiments accelerates scientific advancements, yielding quicker results at a reduced cost. While CM is a mature discipline, its use in biomedical engineering for biopolymer materials has only recently gained prominence. In biopolymer biomedical engineering, CM focuses on three key research areas: (A) Computer-aided design (CAD/CAM) utilizes specialized software to design and model biopolymers for various biomedical applications. This technology allows researchers to create precise three-dimensional models of biopolymers, taking into account their chemical, structural, and functional properties. These models can be used to enhance the structure of biopolymers and improve their effectiveness in specific medical applications. (B) Finite element analysis, a computational technique used to analyze and solve problems in engineering and physics. This approach divides the physical domain into small finite elements with simple geometric shapes. This computational technique enables the study and understanding of the mechanical and structural behavior of biopolymers in biomedical environments. (C) Molecular dynamics (MD) simulations involve using advanced computational techniques to study the behavior of biopolymers at the molecular and atomic levels. These simulations are fundamental for better understanding biological processes at the molecular level. Studying the wide-ranging uses of MD simulations in biopolymers involves examining the structural, functional, and evolutionary aspects of biomolecular systems over time. MD simulations solve Newton's equations of motion for all-atom systems, producing spatial trajectories for each atom. This provides valuable insights into properties such as water absorption on biopolymer surfaces and interactions with solid surfaces, which are crucial for assessing biomaterials. This review provides a comprehensive overview of the various applications of MD simulations in biopolymers. Additionally, it highlights the flexibility, robustness, and synergistic relationship between in silico and experimental techniques.

New Origins of Yeast, Plant and Bacterial-Derived Extracellular Vesicles to Expand and Advance Compound Delivery

Extracellular vesicles (EVs) constitute a sophisticated molecular exchange mechanism highly regarded for their potential as a next-generation platform for compound delivery. However, identifying sustainable and biologically safe sources of EVs remains a challenge. This work explores the emergence of novel sources of plant and bacterial-based EVs, such as those obtained from food industry by-products, known as BP-EVs, and their potential to be used as safer and biocompatible nanocarriers, addressing some of the current challenges of the field. These novel sources exhibit remarkable oral bioavailability and biodistribution, with minimal cytotoxicity and a selective targeting capacity toward the central nervous system, liver, and skeletal tissues. Additionally, we review the ease of editing these recently uncovered nanocarrier-oriented vesicles using common EV editing methods, examining the cargo-loading processes applicable to these sources, which involve both passive and active functionalization methods. While the primary focus of these novel sources of endogenous EVs is on molecule delivery to the central nervous system and skeletal tissue based on their systemic target preference, their use, as reviewed here, extends beyond these key applications within the biotechnological and biomedical fields.

Impact of mechanical cues on key cell functions and cell-nanoparticle interactions

In recent years, it has been recognized that mechanical forces play an important regulative role in living organisms and possess a direct impact on crucial cell functions, ranging from cell growth to maintenance of tissue homeostasis. Advancements in mechanobiology have revealed the profound impact of mechanical signals on diverse cellular responses that are cell type specific. Notably, numerous studies have elucidated the pivotal role of different mechanical cues as regulatory factors influencing various cellular processes, including cell spreading, locomotion, differentiation, and proliferation. Given these insights, it is unsurprising that the responses of cells regulated by physical forces are intricately linked to the modulation of nanoparticle uptake kinetics and processing. This complex interplay underscores the significance of understanding the mechanical microenvironment in shaping cellular behaviors and, consequently, influencing how cells interact with and process nanoparticles. Nevertheless, our knowledge on how localized physical forces affect the internalization and processing of nanoparticles by cells remains rather limited. A significant gap exists in the literature concerning a systematic analysis of how mechanical cues might bias the interactions between nanoparticles and cells. Hence, our aim in this review is to provide a comprehensive and critical analysis of the existing knowledge regarding the influence of mechanical cues on the complicated dynamics of cell-nanoparticle interactions. By addressing this gap, we would like to contribute to a detailed understanding of the role that mechanical forces play in shaping the complex interplay between cells and nanoparticles.

Unveiling the Power of Cloaking Metal-Organic Framework Platforms via Supramolecular Antibody Conjugation

Targeted drug delivery systems based on metal-organic frameworks (MOFs) have progressed tremendously since inception and are now widely applicable in diverse scientific fields. However, translating MOF agents directly to targeted drug delivery systems remains a challenge due to the biomolecular corona phenomenon. Here, we observed that supramolecular conjugation of antibodies to the surface of MOF particles (MOF-808) via electrostatic interactions and coordination bonding can reduce protein adhesion in biological environments and show stealth shields. Once antibodies are stably conjugated to particles, they were neither easily exchanged with nor covered by biomolecule proteins, which is indicative of the stealth effect. Moreover, upon conjugation of the MOF particle with specific targeted antibodies, namely, anti-CD44, human epidermal growth factor receptor 2 (HER2), and epidermal growth factor receptor (EGFR), the resulting hybrid exhibits an augmented targeting efficacy toward cancer cells overexpressing these receptors, such as HeLa, SK-BR-3, and 4T1, as evidenced by flow cytometry. The therapeutic effectiveness of the antibody-conjugated MOF (anti-M808) was further evaluated through in vivo imaging and the assessment of tumor inhibition effects using IR-780-loaded EGFR-M808 in a 4T1 tumor xenograft model employing nude mice. This study therefore provides insight into the use of supramolecular antibody conjugation as a promising method for developing MOF-based drug delivery systems.

Size- and Shape-Dependent Interactions of Lipid-Coated Silver Nanoparticles: An Improved Mechanistic Understanding through Model Cell Membranes and In Vivo Toxicity

The widespread use of silver nanoparticles (AgNPs) in various applications and industries has brought to light the need for understanding the complex relationship between the physicochemical properties (shape, size, charge, and surface chemistry) of AgNPs that affect their ability to enter cells and cause toxicity. To evaluate their toxicological outcomes, this study systematically analyzed a series of homogeneous hybrid lipid-coated AgNPs spanning sizes from 5 to 100 nm with diverse shapes (spheres, triangles, and cubes). The hybrid lipid membrane comprises hydrogenated phosphatidylcholine (HPC), sodium oleate (SOA), and hexanethiol (HT), which shield the AgNP surface from surface oxidation and toxic Ag+ ion release to minimize its contribution to toxicity. To reduce any significant effects by surface chemistry, the HPC, SOA, and HT membrane composition ratio was kept constant, and the AgNPs were assessed using embryonic zebrafish (Danio rerio). While a direct comparison cannot be drawn due to the lack of complementary sizes below 40 nm for triangular plates and cubes due to synthetic challenges, significant mortality was observed for spherical AgNPs (AgNSs) of 5, 20, 40, and 60 nm at 120 h postfertilization at concentrations ≥6 mg Ag/L. In contrast, the 10, 80, and 100 nm AgNSs, 40, 70, and 100 nm triangular plate AgNPs (AgNPLs), and 55, 75, and 100 nm cubic AgNPs (AgNCs) showed no significant mortality at 5 days postfertilization following exposure to AgNPs at concentrations up to 12 mg Ag/L. With constant surface chemistry on the AgNPs, size is the dominant factor driving toxicological responses, with smaller nanoparticles (5 to 60 nm) being the most toxic. Larger AgNSs, AgNCs, and AgNPLs from 75 to 100 nm do not show any evidence of toxicity. However, when closely examining sizes between 40 and 60 nm for AgNSs, AgNCs, and AgNPLs, there is evidence that discriminates shape as a driver of toxicity since sublethal responses generally were observed to follow a pattern, suggesting toxicity is most significant for AgNSs followed by AgNPLs and then AgNCs, which is the least toxic. Sum frequency generation vibrational spectroscopy showed that irrespective of size or shape, all hybrid lipid-coated AgNPs interact with membrane surfaces and "snorkel" between phases into the lipid monolayer with minimal energetic cost. These findings decisively demonstrate that not only smaller AgNPs but also the shape of the AgNPs influences their biological compatibility.

A Review on Investigating the Interactions between Nanoparticles and the Pulmonary Surfactant Monolayer with Coarse-Grained Molecular Dynamics Method

Pulmonary drug delivery has garnered significant attention due to its targeted local lung action, minimal toxic side effects, and high drug utilization. However, the physicochemical properties of inhaled nanoparticles (NPs) used as drug carriers can influence their interactions with the pulmonary surfactant (PS) monolayer, potentially altering the fate of the NPs and impairing the biophysical function of the PS monolayer. Thus, the objective of this review is to summarize how the physicochemical properties of NPs affect their interactions with the PS monolayer. Initially, the definition and properties of NPs, as well as the composition and characteristics of the PS monolayer, are introduced. Subsequently, the coarse-grained molecular dynamics (CGMD) simulation method for studying the interactions between NPs and the PS monolayer is presented. Finally, the implications of the hydrophobicity, size, shape, surface charge, surface modification, and aggregation of NPs on their interactions with the PS monolayer and on the composition of biomolecular corona are discussed. In conclusion, gaining a deeper understanding of the effects of the physicochemical properties of NPs on their interactions with the PS monolayer will contribute to the development of safer and more effective nanomedicines for pulmonary drug delivery.

Cardiovascular toxic effects of nanoparticles and corresponding molecular mechanisms

Rapid advancements in nanotechnology have been integrated into various disciplines, leading to an increased prevalence of nanoparticle exposure. The widespread utilization of nanomaterials and heightened levels of particulate pollution have prompted government departments to intensify their focus on assessing the safety of nanoparticles (NPs). The cardiovascular system, crucial for maintaining human health, has emerged as vulnerable to damage from nanoparticle exposure. A mounting body of evidence indicates that interactions can occur when NPs come into contact with components of the cardiovascular system, contributing to adverse cardiovascular disease (CVD). However, the underlying molecular mechanisms driving these events remain elusive. This work provides a comprehensive review of recent advance on nanoparticle-induced adverse cardiovascular events and offers insight into the associated molecular mechanisms. Finally, the influencing factors of NPs-induced cardiovascular toxicity are discussed.

Nanosuspensions in ophthalmology: Overcoming challenges and enhancing drug delivery for eye diseases

This review article provides a comprehensive overview of the advancements in using nanosuspensions for controlled drug delivery in ophthalmology. It highlights the significance of ophthalmic drug delivery due to the prevalence of eye diseases and delves into various aspects of this field. The article explores molecular mechanisms, drugs used, and physiological factors affecting drug absorption. It also addresses challenges in treating both anterior and posterior eye segments and investigates the role of mucus in obstructing micro- and nanosuspensions. Nanosuspensions are presented as a promising approach to enhance drug solubility and absorption, covering formulation, stability, properties, and functionalization. The review discusses the pros and cons of using nanosuspensions for ocular drug delivery and covers their structure, preparation, characterization, and applications. Several graphical representations illustrate their role in treating various eye conditions. Specific drug categories like anti-inflammatory drugs, antihistamines, glucocorticoids, and more are discussed in detail, with relevant studies. The article also addresses current challenges and future directions, emphasizing the need for improved nanosuspension stability and exploring potential technologies. Nanosuspensions have shown substantial potential in advancing ophthalmic drug delivery by enhancing solubility and absorption. This article is a valuable resource for researchers, clinicians, and pharmaceutical professionals in this field, offering insights into recent developments, challenges, and future prospects in nanosuspension use for ocular drug delivery.

Gelatin-Encapsulated Tetrahedral DNA Nanostructure Enhances Cellular Internalization for Treating Noise-Induced Hearing Loss

Nanoparticle-based drug delivery strategies have emerged as a crucial avenue for comprehensive sensorineural hearing loss treatment. Nevertheless, developing therapy vectors crossing both biological and cellular barriers has encountered significant challenges deriving from various external factors. Herein, the rational integration of gelatin nanoparticles (GNPs) with tetrahedral DNA nanostructures (TDNs) to engineer a distinct drug-delivery nanosystem (designed as TDN@GNP) efficiently enhances the biological permeability and cellular internalization, further resolving the dilemma of noise-induced hearing loss via loading epigallocatechin gallate (EGCG) with anti-lipid peroxidation property. Rationally engineering of TDN@GNP demonstrates dramatic alterations in the physicochemical key parameters of TDNs that are pivotal in cell-particle interactions and promote cellular uptake through multiple endocytic pathways. Furthermore, the EGCG-loaded nanosystem (TDN-EGCG@GNP) facilitates efficient inner ear drug delivery by superior permeability through the biological barrier (round window membrane), maintaining high drug concentration within the inner ear. The TDN-EGCG@GNP actively overcomes the cell membrane, exhibiting hearing protection from noise insults via reduced lipid peroxidation in outer hair cells and spiral ganglion neurons. This work exemplifies how integrating diverse vector functionalities can overcome biological and cellular barriers in the inner ear, offering promising applications for inner ear disorders.

Deciphering the Drug Delivery Potential of Milk Exosome Nanovesicles for Aminobenzylpenicillin Therapeutic Efficacy against Contagious Staphylococcus Aureus in Bovine Mastitis

The emergence of antimicrobial resistance and failure of antibiotic treatment are challenging tasks for managing bovine mastitis, which is mainly caused by the contagious Staphylococcus aureus (S. aureus).To overcome these difficulties, there is an urgent need for a novel drug system. In the present study, the aim is to develop next-generation therapeutics against S. aureus by harnessing the drug delivery potential of milk nanovesicles called milk exosomes (mENs). In the present work, a drug system is developed by encapsulating aminobenzylpenicillin (AMP) in mENs (mENs-AMP). Electron microscopy and zeta-sizer results indicate that the size of mENs-AMP ranged from 55.79 ± 2.8 to 85.53 ± 7.4 nm. The AMP loading efficiency in mENs is 88.61% with its sustained release. Fluorescence spectroscopy results indicated that mENs are biocompatible with mammary epithelial cells. In vitro studies show that the antibacterial activity and the minimum inhibitory concentrations of mENs-AMP are eleven times greater and four times lower than that of unencapsulated AMP, respectively. The mENs-AMP exhibit significantly higher therapeutic efficacy than AMP at the same dosage and treatment frequency. Validation of this approach is demonstrated in mastitis-affected animals through an observation in the reduction of somatic cell counts and bacterial loads in the milk of treated animals.