A plate-based electrochromic approach for the high-throughput detection of electrochemically active bacteria

Syntrophic propionate degradation in anaerobic digestion facilitated by hydrochar: Microbial insights as revealed by genome-centric metatranscriptomics

Propionate is a model substrate for studying energy-limited syntrophic communities in anaerobic digestion, and syntrophic bacteria usually catalyze its degradation in syntrophy with methanogens. In the present study, metagenomics and metatranscriptomics were used to study the effect of the supportive material (e.g., hydrochar) on the key members of propionate degradation and their cooperation mechanism. The results showed that hydrochar increased the methane production rate (up to 57.1%) from propionate. The general transcriptional behavior of the microbiome showed that both interspecies H2 transfer (IHT) and direct interspecies electron transfer (DIET) played essential roles in the hydrochar-mediated methanation of propionate. Five highly active syntrophic propionate-oxidizing bacteria were identified by genome-centric metatranscriptomics. H85pel, a member of the family Pelotomaculaceae, was specifically enriched by hydrochar. Hydrochar enhanced the expression of the flagellum subunit, which interacted with methanogens and hydrogenases in H85pel, indicating that IHT was one of the essential factors promoting propionate degradation. Hydrochar also enriched H162tha belonging to the genus of Thauera. Hydrochar induced the expression of genes related to the complete propionate oxidation pathway, which did not produce acetate. Hydrochar and e-pili-mediated DIET were enhanced, which was another factor promoting propionate degradation. These findings improved the understanding of metabolic traits and cooperation between syntrophic propionate oxidizing bacteria (SPOB) and co-metabolizing partners and provided comprehensive transcriptional insights on function in propionate methanogenic systems.

Exploring phenazine electron transfer interaction with elements of the respiratory pathways of Pseudomonas putida and Pseudomonas aeruginosa

Pseudomonas aeruginosa phenazines contribute to survival under microaerobic and anaerobic conditions by extracellular electron discharge to regulate cellular redox balances. This electron discharge is also attractive to be used for bioelectrochemical applications. However, elements of the respiratory pathways that interact with phenazines are not well understood. Five terminal oxidases are involved in the aerobic electron transport chain (ETC) of Pseudomonas putida and P. aeruginosa. The latter bacterium also includes four reductases that allow for denitrification. Here, we explored if phenazine-1-carboxylic acid interacts with those elements to enhance anodic electron discharge and drive bacterial growth in oxygen-limited conditions. Bioelectrochemical evaluations of terminal oxidase-deficient mutants of both Pseudomonas strains and P. aeruginosa with stimulated denitrification pathways indicated no direct beneficial interaction of phenazines with ETC elements for extracellular electron discharge. However, the single usage of the Cbb3-2 oxidase increased phenazine production, electron discharge, and cell growth. Assays with purified periplasmic cytochromes NirM and NirS indicated that pyocyanin acts as their electron donor. We conclude that phenazines play an important role in electron transfer to, between, and from terminal oxidases under oxygen-limiting conditions and their modulation might enhance EET. However, the phenazine-anode interaction cannot replace oxygen respiration to deliver energy for biomass formation.

Engineering extracellular electron transfer to promote simultaneous brewing wastewater treatment and chromium reduction

Microbial fuel cell (MFC) technology has been developed for wastewater treatment in the anodic chamber, and heavy metal reduction in the cathodic chamber. However, the limited extracellular electron transfer (EET) rate of exoelectrogens remained a constraint for practical applications of MFCs. Here, a MFC system that used the electricity derived from anodic wastewater treatment to drive cathodic Cr6+ reduction was developed, which enabled an energy self-sustained approach to efficiently address Cr6+ contamination. This MFC system was achieved by screening exoelectrogens with a superior EET rate, promoting the exoelectrogenic EET rate, and constructing a conductive bio-anode. Firstly, Shewanella algae-L3 was screened from brewing wastewater acclimatized sludge, which generated power density of 566.83 mW m-2. Secondly, to facilitate EET rate, flavin synthesis gene operon ribADEHC was overexpressed in engineered S. algae-L3F to increase flavins biosynthesis, which promoted the power density to 1233.21 mW m-2. Thirdly, to facilitate interface electron transfer, carbon nanotube (CNT) was employed to construct a S. algae-L3F-CNT bio-anode, which further enhanced power density to 3112.98 mW m-2. Lastly, S. algae-L3F-CNT bio-anode was used to harvest electrical energy from brewing wastewater to drive cathodic Cr6+ reduction in MFC, realizing 71.43% anodic COD removal and 98.14% cathodic Cr6+ reduction. This study demonstrated that enhanced exoelectrogenic EET could facilitate cathodic Cr6+ reduction in MFC.

Optimizing electrochemically active microorganisms as a key player in the bioelectrochemical system: Identification methods and pathways to large-scale implementation

The rapid global economic growth driven by industrialization and population expansion has resulted in significant issues, including reliance on fossil fuels, energy scarcity, water crises, and environmental emissions. To address these issues, bioelectrochemical systems (BES) have emerged as a dual-purpose solution, harnessing electrochemical processes and the capabilities of electrochemically active microorganisms (EAM) to simultaneously recover energy and treat wastewater. This review examines critical performance factors in BES, including inoculum selection, pretreatment methods, electrodes, and operational conditions. Further, authors explore innovative approaches to suppress methanogens and simultaneously enhance the EAM in mixed cultures. Additionally, advanced techniques for detecting EAM are discussed. The rapid detection of EAM facilitates the selection of suitable inoculum sources and optimization of enrichment strategies in BESs. This optimization is essential for facilitating the successful scaling up of BES applications, contributing substantially to the realization of clean energy and sustainable wastewater treatment. This analysis introduces a novel viewpoint by amalgamating contemporary research on the selective enrichment of EAM in mixed cultures. It encompasses identification and detection techniques, along with methodologies tailored for the selective enrichment of EAM, geared explicitly toward upscaling applications in BES.

Comparing the mechanisms of syntrophic volatile fatty acids oxidation and methanogenesis recovery from ammonia stress in regular and biochar-assisted anaerobic digestion: Different roads lead to the same goal

Biochar has been recognized as a promising additive to mitigate ammonia inhibition during syntrophic methanogenesis, while the key function of biochar in this process is still in debates. This study clarified the distinct mechanisms of syntrophic volatile fatty acids -oxidizing and methanogenesis recovery from ammonia inhibition in regular and biochar-assisted anaerobic digestion. Under 5 g/L ammonia stress, adding biochar shortened the methanogenic lag time by 10.9% and dramatically accelerated the maximum methane production rate from 60.3 to 94.7 mLCH4/gVSsludge/d. A photometric analysis with a nano-WO3 probe revealed that biochar enhanced the extracellular electron transfer (EET) capacity of suspended microbes (Pearson's r = -0.98), confirming that biochar facilitated methanogenesis by boosting EET between syntrophic butyrate oxidizer and methanogens. Same linear relationship between EET capacity and methanogenic rate was not observed in the control group. Microbial community integrating functional genes prediction analysis uncovered that biochar re-shaped syntrophic partners by enriching Constridium_sensu_stricto/Syntrophomonas and Methanosarcina. The functional genes encoding Co-enzyme F420 hydrogenase and formylmethanofuran dehydrogenase were upregulated by 1.4-2.3 times, consequently enhanced the CO2-reduction methanogenesis pathway. Meanwhile, the abundances of gene encoding methylene-tetrahydrofolate transformation, a series of intermediate processes involved in acetate oxidation, in the biochar-assisted group were 28.2-63.7% higher than these in control group. Comparatively, Methanosaeta played a pivotal role driving aceticlastic methanogenesis in the control group because the abundance of gene encoding acetyl-CoA decarbonylase/synthase complex increased by 1.9 times, suggesting an aceticlastic combining H2-based syntrophic methanogenesis pathway was established in control group to resist ammonia stress. A 2nd period experiment elucidated that although depending on distinct mechanisms, the volatile fatty acid oxidizers and methanogens in both groups developed sustained and stable strategies to resist ammonia stress. These findings provided new insights to understand the distinct methanogenic recovery strategy to resist toxic stress under varied environmental conditions.

Interfacial Electron Transfer in Chemical and Biological Transformation of Pollutants in Environmental Catalysis

Interfacial electron transfer (IET) is essential for chemical and biological transformation of pollutants, operative across diverse lengths and time scales. This Perspective presents an array of multiscale molecular simulation methodologies, supplemented by in situ monitoring and imaging techniques, serving as robust tools to decode IET enhancement mechanisms such as interface molecular modification, catalyst coordination mode, and atomic composition regulation. In addition, three IET-based pollutant transformation systems, an electrocatalytic oxidation system, a bioelectrochemical spatial coupling system, and an enzyme-inspired electrocatalytic system, were developed, demonstrating a high effect in transforming and degrading pollutants. To improve the effectiveness and scalability of IET-based strategies, the refinement of these systems is necessitated through rigorous research and theoretical exploration, particularly in the context of practical wastewater treatment scenarios. Future endeavors aim to elucidate the synergy between biological and chemical modules, edit the environmental functional microorganisms, and harness machine learning for designing advanced environmental catalysts to boost efficiency. This Perspective highlights the powerful potential of IET-focused environmental remediation strategies, emphasizing the critical role of interdisciplinary research in addressing the urgent global challenge of water pollution.

Biochar facilitates methanogens evolution by enhancing extracellular electron transfer to boost anaerobic digestion of swine manure under ammonia stress

This study explored the mechanisms by which biochar mitigates ammonia inhibition in anaerobic digestion (AD) of swine manure. Findings show 2-8 g/L exogenous ammonia dosages gradually inhibited AD, leading to decreases in the efficiencies of hydrolysis, acidogenesis and methanogenesis by 3.4-70.8%, 6.0-82.0%, and 4.9-93.8%, respectively. However, biochar addition mitigated this inhibition and facilitated methane production. Biochar enhanced microbial activities related to electron transport and extracellular electron transfer. Moreover, biochar primarily enriched Methanosarcina, which, consequently, upregulated the genes encoding formylmethanofuran dehydrogenase and methenyltetrahydromethanopterin cyclohydrolase for the CO2-reducing methanogenesis pathway by 26.9-40.8%. It is believed that biochar mediated direct interspecies electron transfer between syntrophic partners, thereby enhancing methane production under ammonia stress. Interestingly, biochar removal did not significantly impact the AD performance of the acclimated microbial community. This indicated the pivotal role of biochar in triggering methanogen evolution to mitigate ammonia stress rather than the indispensable function after the enrichment of ammonia-resistance methanogen.

Efficient and precise control of gene expression in Geobacter sulfurreducens through new genetic elements and tools for pollutant conversion

Geobacter species, exhibiting exceptional extracellular electron transfer aptitude, hold great potential for applications in pollution remediation, bioenergy production, and natural elemental cycles. Nonetheless, a scarcity of well-characterized genetic elements and gene expression tools constrains the effective and precise fine-tuning of gene expression in Geobacter species, thereby limiting their applications. Here, we examined a suite of genetic elements and developed a new genetic editing tool in Geobacter sulfurreducens to enhance their pollutant conversion capacity. First, the performances of the widely used inducible promoters, constitutive promoters, and ribosomal binding sites (RBSs) elements in G. sulfurreducens were quantitatively evaluated. Also, six native promoters with superior expression levels than constitutive promoters were identified on the genome of G. sulfurreducens. Employing the characterized genetic elements, the clustered regularly interspaced short palindromic repeats interference (CRISPRi) system was constructed in G. sulfurreducens to achieve the repression of an essential gene-aroK and morphogenic genes-ftsZ and mreB. Finally, applying the engineered strain to the reduction of tungsten trioxide (WO3 ), methyl orange (MO), and Cr(VI), We found that morphological elongation through ftsZ repression amplified the extracellular electron transfer proficiency of G. sulfurreducens and facilitated its contaminant transformation efficiency. These new systems provide rapid, versatile, and scalable tools poised to expedite advancements in Geobacter genomic engineering to favor environmental and other biotechnological applications.

Electron Transfer Mechanism at the Interface of Multi-Heme Cytochromes and Metal Oxide

Electroactive microbial cells have evolved unique extracellular electron transfer to conduct the reactions via redox outer-membrane (OM) proteins. However, the electron transfer mechanism at the interface of OM proteins and nanomaterial remains unclear. In this study, the mechanism for the electron transfer at biological/inorganic interface is investigated by integrating molecular modeling with electrochemical and spectroscopic measurements. For this purpose, a model system composed of OmcA, a typical OM protein, and the hexagonal tungsten trioxide (h-WO3 ) with good biocompatibility is selected. The interfacial electron transfer is dependent mainly on the special molecular configuration of OmcA and the microenvironment of the solvent exposed active center. Also, the apparent electron transfer rate can be tuned by site-directed mutagenesis at the axial ligand of the active center. Furthermore, the equilibrium state of the OmcA/h-WO3 systems suggests that their attachment is attributed to the limited number of residues. The electrochemical analysis of OmcA and its variants reveals that the wild type exhibits the fastest electron transfer rate, and the transient absorption spectroscopy further shows that the axial histidine plays an important role in the interfacial electron transfer process. This study provides a useful approach to promote the site-directed mutagenesis and nanomaterial design for bioelectrocatalytic applications.

Generation of green electricity from sludge using photo-stimulated bacterial consortium as a sustainable technology

Microbial fuel cell (MFC) is a bio-electrical energy generator that uses respiring microbes to transform organic matter present in sludge into electrical energy. The primary goal of this work was to introduce a new approach to the green electricity generation technology. In this context a total of 6 bacterial isolates were recovered from sludge samples collected from El-Sheikh Zayed water purification plant, Egypt, and screened for their electrogenic potential. The most promising isolates were identified according to 16S rRNA sequencing as Escherichia coli and Enterobacter cloacae, promising results were achieved on using them in consortium at optimized values of pH (7.5), temperature (30°C) and substrate (glucose/pyruvate 1%). Low level red laser (λ = 632.8nm, 8mW) was utilized to promote the electrogenic efficiency of the bacterial consortium, maximum growth was attained at 210 sec exposure interval. In an application of adding standard inoculum (107 cfu/mL) of the photo-stimulated bacterial consortium to sludge based MFC a significant increase in the output potential difference values were recorded, the electricity generation was maintained by regular supply of external substrate. These results demonstrate the future development of the dual role of MFCs in renewable energy production and sludge recycling.

Developing a PAM-Flexible CRISPR-Mediated Dual-Deaminase Base Editor to Regulate Extracellular Electron Transport in Shewanella oneidensis

Shewanella oneidensis MR-1 is a promising electroactive microorganism in environmental bioremediation, bioenergy generation, and bioproduct synthesis. Accelerating the extracellular electron transfer (EET) pathway that enables efficient electron exchange between microbes and extracellular substances is critical for improving its electrochemical properties. However, the potential genomic engineering strategies for enhancing EET capabilities are still limited. Here, we developed a clustered regularly interspaced short palindromic repeats (CRISPR)-mediated dual-deaminase base editing system, named in situ protospacer-adjacent motif (PAM)-flexible dual base editing regulatory system (iSpider), for precise and high-throughput genomic manipulation. The iSpider enabled simultaneous C-to-T and A-to-G conversions with high diversity and efficiency in S. oneidensis. By weakening DNA glycosylase-based repair pathway and tethering two copies of adenosine deaminase, the A-to-G editing efficiency was obviously improved. As a proof-of-concept study, the iSpider was adapted to achieve multiplexed base editing for the regulation of the riboflavin biosynthesis pathway, and the optimized strain showed an approximately three-fold increase in riboflavin production. Moreover, the iSpider was also applied to evolve the performance of an inner membrane component CymA implicated in EET, and one beneficial mutant facilitating electron transfer could be rapidly identified. Taken together, our study demonstrates that the iSpider allows efficient base editing in a PAM-flexible manner, providing insights into the design of novel genomic tools for Shewanella engineering.

Pseudomonas aeruginosa's greenish-blue pigment pyocyanin: its production and biological activities

A subject of great interest is the bioprospecting of microorganisms and their bioactive byproducts, such as pigments. Microbial pigments have various benefits, including being safe to use due to their natural makeup, having therapeutic effects, and being produced all year round, regardless of the weather or location. Pseudomonas aeruginosa produces phenazine pigments that are crucial for interactions between Pseudomonas species and other living things. Pyocyanin pigment, which is synthesized by 90-95% of P. aeruginosa, has potent antibacterial, antioxidant, and anticancer properties. Herein, we will concentrate on the production and extraction of pyocyanin pigment and its biological use in different areas of biotechnology, engineering, and biology.

Recent advances in enrichment, isolation, and bio-electrochemical activity evaluation of exoelectrogenic microorganisms

Exoelectrogenic microorganisms (EEMs) catalyzed the conversion of chemical energy to electrical energy via extracellular electron transfer (EET) mechanisms, which underlay diverse bio-electrochemical systems (BES) applications in clean energy development, environment and health monitoring, wearable/implantable devices powering, and sustainable chemicals production, thereby attracting increasing attentions from academic and industrial communities in the recent decades. However, knowledge of EEMs is still in its infancy as only ~100 EEMs of bacteria, archaea, and eukaryotes have been identified, motivating the screening and capture of new EEMs. This review presents a systematic summarization on EEM screening technologies in terms of enrichment, isolation, and bio-electrochemical activity evaluation. We first generalize the distribution characteristics of known EEMs, which provide a basis for EEM screening. Then, we summarize EET mechanisms and the principles underlying various technological approaches to the enrichment, isolation, and bio-electrochemical activity of EEMs, in which a comprehensive analysis of the applicability, accuracy, and efficiency of each technology is reviewed. Finally, we provide a future perspective on EEM screening and bio-electrochemical activity evaluation by focusing on (i) novel EET mechanisms for developing the next-generation EEM screening technologies, and (ii) integration of meta-omics approaches and bioinformatics analyses to explore nonculturable EEMs. This review promotes the development of advanced technologies to capture new EEMs.

Hydrochar mediated anaerobic digestion of bio-wastes: Advances, mechanisms and perspectives

Bio-wastes treatment and disposal has become a challenge because of their increasing output. Given the abundant organic matter in bio-wastes, its related resource treatment methods have received more and more attention. As a promising strategy, anaerobic digestion (AD) has been widely used in the treatment of bio-wastes, during which not only methane as energy can be recovered but also their reduction can be achieved. However, AD process is generally disturbed by some internal factors (e.g., low hydrolysis efficiency and accumulated ammonia) and external factors (e.g., input pollutants), resulting in unstable AD operation performance. Recently, hydrochar was wildly found to improve AD performance when added to AD systems. This review comprehensively summarizes the research progress on the performance of hydrochar-mediated AD, such as increased methane yield, improved operation efficiency and digestate dewatering, and reduced heavy metals in digestate. Subsequently, the underlying mechanisms of hydrochar promoting AD were systematically elucidated and discussed, including regulation of electron transfer (ET) mode, microbial community structure, bio-processes involved in AD, and reaction conditions. Moreover, the effects of properties of hydrochar (e.g., feedstock, hydrothermal carbonization (HTC) temperature, HTC time, modification and dosage) on the improvement of AD performance are systematically concluded. Finally, the relevant knowledge gaps and opportunities to be studied are presented to improve the progress and application of the hydrochar-mediated AD technology. This review aims to offer some references and directions for the hydrochar-mediated AD technology in improving bio-wastes resource recovery.

Isolation and Characterisation of Electrogenic Bacteria from Mud Samples

To develop efficient microbial fuel cell systems for green energy production using different waste products, establishing characterised bacterial consortia is necessary. In this study, bacteria with electrogenic potentials were isolated from mud samples and examined to determine biofilm-formation capacities and macromolecule degradation. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry identifications have revealed that isolates represented 18 known and 4 unknown genuses. They all had the capacities to reduce the Reactive Black 5 stain in the agar medium, and 48 of them were positive in the wolfram nanorod reduction assay. The isolates formed biofilm to different extents on the surfaces of both adhesive and non-adhesive 96-well polystyrene plates and glass. Scanning electron microscopy images revealed the different adhesion potentials of isolates to the surface of carbon tissue fibres. Eight of them (15%) were able to form massive amounts of biofilm in three days at 23 °C. A total of 70% of the isolates produced proteases, while lipase and amylase production was lower, at 38% and 27% respectively. All of the macromolecule-degrading enzymes were produced by 11 isolates, and two isolates of them had the capacity to form a strong biofilm on the carbon tissue one of the most used anodic materials in MFC systems. This study discusses the potential of the isolates for future MFC development applications.

Multiple roles of released c-type cytochromes in tuning electron transport and physiological status of Geobacter sulfurreducens

Dissimilatory metal-reducing bacteria (DMRB) can transfer electrons to extracellular insoluble electron acceptors and play important roles in geochemical cycling, biocorrosion, environmental remediation, and bioenergy generation. c-type cytochromes (c-Cyts) are synthesized by DMRB and usually transported to the cell surface to form modularized electron transport conduits through protein assembly, while some of them are released as extracellularly free-moving electron carriers in growth to promote electron transport. However, the type of these released c-Cyts, the timing of their release, and the functions they perform have not been unrevealed yet. In this work, after characterizing the types of c-Cyts released by Geobacter sulfurreducens under a variety of cultivation conditions, we found that these c-Cyts accumulated up to micromolar concentrations in the surrounding medium and conserved their chemical activities. Further studies demonstrated that the presence of c-Cyts accelerated the process of microbial extracellular electron transfer and mediated long-distance electron transfer. In particular, the presence of c-Cyts promoted the microbial respiration and affected the physiological state of the microbial community. In addition, c-Cyts were observed to be adsorbed on the surface of insoluble electron acceptors and modify electron acceptors. These results reveal the overlooked multiple roles of the released c-Cyts in acting as public goods, delivering electrons, modifying electron acceptors, and even regulating bacterial community structure in natural and artificial environments.

Revealing the mechanisms of polypyrrole (Ppy) enhancing methane production from anaerobic digestion of waste activated sludge (WAS)

Anaerobic digestion (AD) is a promising method for treating waste activated sludge (WAS), but the low methane yield limits its large-scale application. The addition of conductive nanomaterials has been demonstrated to enhance the activity of AD via promoting the direct interspecies electron transfer (DIET). In this study, novel conductive polypyrrole (Ppy) was prepared to effectively improve the AD performance of WAS. The results showed that the accumulative methane production was enhanced by 27.83% by Ppy, with both acidogenesis and methanogenesis being efficiently accelerated. The microbial community analysis indicated that the abundance of bacteria associated with acidogenesis process was significantly elevated by Ppy. Further investigation by metatranscriptomics revealed that fadE and fadN genes (to express the key enzymes in fatty acid metabolism) were highly expressed in the Ppy-driven AD, suggesting that Ppy promoted electron generation during acid production. For methanogenesis metabolism, genes related to acetate utilization and CO₂ utilization methanogenesis were also up-regulated by Ppy, illustrating that Ppy facilitates the utilization of acetate and electrons by methanogenic archaea, thus potentially promoting the methanogenesis through DIET.

Novel Long-Chain Fatty Acid (LCFA)-Degrading Bacteria and Pathways in Anaerobic Digestion Promoted by Hydrochar as Revealed by Genome-Centric Metatranscriptomics Analysis

A large amount of long-chain fatty acids (LCFA) are generated after lipids hydrolysis in anaerobic digestion (AD), and LCFA are difficult to be biodegraded. This study showed that hydrochar (HC), which was produced during the hydrothermal liquefaction of organic wastes, significantly increased the methane production rate (by 56.9%) of oleate, a typical refractory model LCFA. Genomic-centric metatranscriptomics analysis revealed that three novel microbes (Bin138 Spirochaetota sp., Bin35 Smithellaceae sp., and Bin54 Desulfomonilia sp.) that were capable of degrading LCFA were enriched by HC, which played an important role in the degradation of oleate. LCFA was degraded to acetate through the well-known LCFA β-oxidation pathway and the combined β-oxidation and butyrate oxidation pathway. In addition, it was found that HC promoted the direct interspecies electron transfer (DIET) between Methanothrix sp. and Bin54 Desulfomonilia sp. The enriched new types of LCFA-degrading bacteria and the promotion of DIET contributed to the improved methane production rate of oleate by HC. IMPORTANCE Long-chain fatty acids (LCFA) are difficult to be degraded in anaerobic digestion (AD), and the known LCFA degrading bacteria are only limited to the families Syntrophomonadaceae and Syntrophaceae. Here, we found that hydrochar effectively promoted AD of LCFA, and the new LCFA-degrading bacteria and a new metabolic pathway were also revealed based on genomic-centric metatranscriptomic analysis. This study provided a new method for enhancing the AD of organic wastes with high content of LCFA and increased the understanding of the microbes and their metabolic pathways involved in AD of LCFA.

Determinants of Multiheme Cytochrome Extracellular Electron Transfer Uncovered by Systematic Peptide Insertion

The multiheme cytochrome MtrA enables microbial respiration by transferring electrons across the outer membrane to extracellular electron acceptors. While structural studies have identified residues that mediate the binding of MtrA to hemes and to other cytochromes that facilitate extracellular electron transfer (EET), the relative importance of these interactions for EET is not known. To better understand EET, we evaluated how insertion of an octapeptide across all MtrA backbone locations affects Shewanella oneidensis MR-1 respiration on Fe(III). The EET efficiency was found to be inversely correlated with the proximity of the insertion to the heme prosthetic groups. Mutants with decreased EET efficiencies also arose from insertions in a subset of the regions that make residue-residue contacts with the porin MtrB, while all sites contacting the extracellular cytochrome MtrC presented high peptide insertion tolerance. MtrA variants having peptide insertions within the CXXCH motifs that coordinate heme cofactors retained some ability to support respiration on Fe(III), although these variants presented significantly decreased EET efficiencies. Furthermore, the fitness of cells expressing different MtrA variants under Fe(III) respiration conditions correlated with anode reduction. The peptide insertion profile, which represents the first comprehensive sequence-structure-function map for a multiheme cytochrome, implicates MtrA as a strategic protein engineering target for the regulation of EET.

Engineering Shewanella carassii, a newly isolated exoelectrogen from activated sludge, to enhance methyl orange degradation and bioelectricity harvest

Electroactive microorganisms (EAMs) play important roles in biogeochemical redox processes and have been of great interest in the fields of energy recovery, waste treatment, and environmental remediation. However, the currently identified EAMs are difficult to be widely used in complex and diverse environments, due to the existence of poor electron transfer capability, weak environmental adaptability, and difficulty with engineering modifications, etc. Therefore, rapid and efficient screening of high performance EAMs from environments is an effective strategy to facilitate applications of microbial fuel cells (MFCs). In this study, to achieve efficient degradation of methyl orange (MO) by MFC and electricity harvest, a more efficient exoelectrogen Shewanella carassii-D₅ that belongs to Shewanella spp. was first isolated from activated sludge by WO₃ nanocluster probe technique. Physiological properties experiments confirmed that S. carassii-D₅ is a Gram-negative strain with rounded colonies and smooth, slightly reddish surface, which could survive in media containing lactate at 30 °C. Moreover, we found that S. carassii-D₅ exhibited remarkable MO degradation ability, which could degrade 66% of MO within 72 h, 1.7 times higher than that of Shewanella oneidensis MR-1. Electrochemical measurements showed that MFCs inoculated with S. carassii-D₅ could generate a maximum power density of 704.6 mW/m², which was 5.6 times higher than that of S. oneidensis MR-1. Further investigation of the extracellular electron transfer (EET) mechanism found that S. carassii-D₅ strain had high level of c-type cytochromes and strong biofilm formation ability compared with S. oneidensis MR-1, thus facilitating direct EET. Therefore, to enhance indirect electron transfer and MO degradation capacity, a synthetic gene cluster ribADEHC encoding riboflavin synthesis pathway from Bacillus subtilis was heterologously expressed in S. carassii-D₅, increasing riboflavin yield from 1.9 to 9.0 mg/g DCW with 1286.3 mW/m² power density output in lactate fed-MFCs. Furthermore, results showed that the high EET rate endowed a faster degradation efficient of MO from 66% to 86% with a maximum power density of 192.3 mW/m², which was 1.3 and 1.6 times higher than that of S. carassii-D₅, respectively. Our research suggests that screening and engineering high-efficient EAMs from sludge is a feasible strategy in treating organic pollutants.

Recovery of heavy metals from industrial wastewater using bioelectrochemical system inoculated with novel Castellaniella species

Water pollution is a global issue that has drastically increased in recent years due to rapid industrial development. Different technologies have been designed for the removal of pollutants from wastewater. However, most of these techniques are expensive, generate new waste, and focus solely on metal removal instead of metal recovery. In this study, novel facultative exoelectrogenic strains designated Castellaniella sp. A5, Castellaniella sp. B3, and Castellaniella sp. A3 were isolated from a microbial fuel cell (MFC). These isolates were utilized as pure and mixed culture inoculums in a bioelectrochemical system (BES) to produce bioelectricity and treat simulated industrial wastewater. A single-chamber MFC inoculated with the mixed culture attained the highest electricity generation (i.e., 320 mW/m² power density and 3.19 A/m² current density), chemical oxygen demand removal efficiency (91.15 ± 0.05%), and coulombic efficiency (54.81 ± 4.18%). In addition, the BES containing biofilms of the mixed culture achieved the highest Cu, Cr, and Cd removal efficiencies of 99.89 ± 0.07%, 99.59 ± 0.53%, and 99.91 ± 0.04%, respectively. The Cr⁶⁺ and Cu²⁺ in the simulated industrial wastewater were recovered via microbial electrochemical reduction as Cr³⁺ and Cu⁰, respectively. However, Cd²⁺ precipitated as Cd (OH)₂ or CdCO₃ on the surface of the cathodes. These results suggest that a mixed culture inoculum of Castellaniella sp. A5, Castellaniella sp. B3, and Castellaniella sp. A3 has great potential as a biocatalyst in BES for heavy metals recovery from industrial wastewater.

Extracellular electron transfer via multiple electron shuttles in waterborne Aeromonas hydrophila for bioreduction of pollutants

Members of the genus Aeromonas prevail in aquatic habitats and have a great potential in biological wastewater treatment because of their unique extracellular electron transfer (EET) capabilities. However, the mediated EET mechanisms of Aeromonas have not been fully understood yet, hindering their applications in biological wastewater treatment processes. In this study, the electron shuttles in Aeromonas hydrophila, a model and widespread strain in aquatic environments and wastewater treatment plants, were explored. A. hydrophila was found to produce both flavins and 2-amino-3-carboxy-1,4-naphthoquinone (ACNQ) as electron shuttles and utilize them to accelerate its EET for the bioreduction of various pollutants. The Mtr-like respiratory pathway was essential for the reduction of flavins, but not involved in the ACNQ reduction. The electron shuttle activity of ACNQ for pollutant bioreduction involved the redox reactions that occurred inside the cell. These findings deepen our understanding about the underlying EET mechanisms in dissimilatory metal reducing bacteria and provide new insights into the roles of the genus Aeromonas in biological wastewater treatment.

High throughput techniques for the rapid identification of electroactive microorganisms

Electroactive microorganisms (EAM), capable of executing extracellular electron transfer (EET) in/out of a cell, are employed in microbial electrochemical technologies (MET) and bioelectronics for harnessing electricity from wastewater, bioremediation and as biosensors. Thus, investigation on EAM is becoming a topic of interest for multidisciplinary areas, such as environmental science, energy and health sectors. Though, EAM are widespread in three domains of life, nevertheless, only a few hundred EAM have been identified so far and hence, the rapid identification of EAM is imperative. In this review, the techniques that are developed for the direct identification of EAM, such as azo dye and WO₃ based techniques, dielectrophoresis, potentiostatic/galvanometric techniques, and other indirect methods, such as spectroscopy and molecular biology techniques, are highlighted with a special focus on time required for the detection of these EAM. The bottlenecks for identifying EAM and the knowledge gaps based on the present investigations are also discussed. Thus, this review is intended to encourage researchers for devolving high-throughput techniques for identifying EAM with more accuracy, while consuming less time.

Genome-Centric Metatranscriptomics Analysis Reveals the Role of Hydrochar in Anaerobic Digestion of Waste Activated Sludge

Anaerobic digestion (AD) of waste activated sludge (WAS) has been widely used, while it poses problems including low methane yield and production rate. Hydrochar is produced by hydrothermal liquefaction of biomass; however, little is known about the role of hydrochar in promoting AD of WAS. The present study showed that hydrochar increased the methane production rate by 30.8% and yield by 31.4% of hydrothermal pretreated dewatered WAS. Hydrochar increased the methane production rate and yield by enhancing the acidification and methanogenesis processes. Genomic-centric metatranscriptomics were used to identify the metabolic activities and transcriptomic response of individual metagenome-assembled genomes that were enriched by hydrochar. Although Methanosarcina sp. FDU0106 had been shown unable to used H₂, it had the complete pathway for the reduction of CO₂ to methane. Syntrophomonas sp. FDU0164 expressed genes for extracellular electron transfer via electrically pili, suggesting that Syntrophomonas sp. FDU0164 and Methanosarcina sp. FDU0106 were exchanging electrons via direct interspecies electron transfer. The expression of pili was decreased, indicating that hydrochar could replace its roles. Additionally, Firmicutes sp. FDU0048, Proteiniphilum sp. FDU0082, and Aminobacterium mobile FDU0089 were related to the degradation of organics, which could be related to the enhanced methane yield.

A CMOS Multi-Modal Electrochemical and Impedance Cellular Sensing Array for Massively Paralleled Exoelectrogen Screening

The paper presents a 256-pixel CMOS sensor array with in-pixel dual electrochemical and impedance detection modalities for rapid, multi-dimensional characterization of exoelectrogens. The CMOS IC has 16 parallel readout channels, allowing it to perform multiple measurements with a high throughput and enable the chip to handle different samples simultaneously. The chip contains a total of 2 × 256 working electrodes of size 44 μm × 52 μm, along with 16 reference electrodes of dimensions 56 μm × 399 μm and 32 counter electrodes of dimensions 399 μm × 106 μm, which together facilitate the high resolution screening of the test samples. The chip was fabricated in a standard 130nm BiCMOS process. The on-chip electrodes are subjected to additional fabrication processes, including a critical Al-etch step that ensures the excellent biocompatibility and long-term reliability of the CMOS sensor array in bio-environment. The electrochemical sensing modality is verified by detecting the electroactive analyte NaFeEDTA and the exoelectrogenic Shewanella oneidensis MR-1 bacteria, illustrating the chip's ability to quantify the generated electrochemical current and distinguish between different analyte concentrations. The impedance measurements with the HEK-293 cancer cells cultured on-chip successfully capture the cell-to-surface adhesion information between the electrodes and the cancer cells. The reported CMOS sensor array outperforms the conventional discrete setups for exoelectrogen characterization in terms of spatial resolution and speed, which demonstrates the chip's potential to radically accelerate synthetic biology engineering.

Polymer Electrochromism Driven by Metabolic Activity Facilitates Rapid and Facile Bacterial Detection and Susceptibility Evaluation

The electrochromism of a water-soluble naturally oxidized electrochromic polymer, ox-PPE, is harnessed for rapid and facile bacterial detection, discrimination, and susceptibility testing. The ox-PPE solution shows distinct colorimetric and spectroscopic changes within 30 min when mixed with live bacteria. For the underlying mechanism, it is found that ox-PPE responds to the reducing species (e.g. cysteine and glutathione) released by metabolically active bacteria. This reduction reaction is ubiquitous among various bacterial strains, with a noticeable difference that enables discrimination of Gram-negative and Gram-positive bacterial strains. Combining ox-PPE with antibiotics, methicillin-susceptible and -resistant S. aureus can be differentiated within 2.5 h. Proof-of-concept demonstration of ox-PPE for antimicrobial susceptibility testing is carried out by incubating E. coli with various antibiotics. The obtained minimum inhibition concentrations are consistent with the conventional culture-based methods, but with the procedure time significantly shortened to 3 h.

Plant secondary metabolites induced electron flux in microbial fuel cell: investigation from laboratory-to-field scale

Wastewater treatment coupled with electricity recovery in microbial fuel cell (MFC) prefer mixed anaerobic sludge as inoculum in anodic chamber than pure stain of electroactive bacteria (EAB), due to robustness and syntrophic association. Genetic modification is difficult to adopt for mixed sludge microbes for enhancing power production of MFC. Hence, we demonstrated use of eco-friendly plant secondary metabolites (PSM) with sub-lethal concentrations to enhance the rate of extracellular electron transfer between EAB and anode and validated it in both bench-scale as well as pilot-scale MFCs. The PSMs contain tannin, saponin and essential oils, which are having electron shuttling properties and their addition to microbes can cause alteration in cell morphology, electroactive behaviour and shifting in microbial population dynamics depending upon concentrations and types of PSM used. Improvement of 2.1-times and 3.8-times in power densities was observed in two different MFCs inoculated with Eucalyptus-extract pre-treated mixed anaerobic sludge and pure culture of Pseudomonas aeruginosa, respectively, as compared to respective control MFCs operated without adding Eucalyptus-extract to inoculum. When Eucalyptus-extract-dose was spiked to anodic chamber (125 l) of pilot-scale MFC, treating septage, the current production was dramatically improved. Thus, PSM-dosing to inoculum holds exciting promise for increasing electricity production of field-scale MFCs.

Developing a population-state decision system for intelligently reprogramming extracellular electron transfer in Shewanella oneidensis

The unique extracellular electron transfer (EET) ability has positioned electroactive bacteria (EAB) as a major class of cellular chassis for genetic engineering aimed at favorable environmental, energy, and geoscience applications. However, previous efforts to genetically enhance EET ability have often impaired the basal metabolism and cellular growth due to the competition for the limited cellular resource. Here, we design a quorum sensing-based population-state decision (PSD) system for intelligently reprogramming the EET regulation system, which allows the rebalanced allocation of the cellular resource upon the bacterial growth state. We demonstrate that the electron output from Shewanella oneidensis MR-1 could be greatly enhanced by the PSD system via shifting the dominant metabolic flux from initial bacterial growth to subsequent EET enhancement (i.e., after reaching a certain population-state threshold). The strain engineered with this system achieved up to 4.8-fold EET enhancement and exhibited a substantially improved pollutant reduction ability, increasing the reduction efficiencies of methyl orange and hexavalent chromium by 18.8- and 5.5-fold, respectively. Moreover, the PSD system outcompeted the constant expression system in managing EET enhancement, resulting in considerably enhanced electron output and pollutant bioreduction capability. The PSD system provides a powerful tool for intelligently managing extracellular electron transfer and may inspire the development of new-generation smart bioelectrical devices for various applications.

Potential-dependent extracellular electron transfer pathways of exoelectrogens

Exoelectrogens are distinct from other bacteria owing to their unique extracellular electron transfer (EET) abilities that allow for anaerobic respiration with various external redox-active surfaces, including electrode and metal oxides. Although the EET process is known to trigger diverse extracellular redox reactions, the reverse impact has been long overlooked. Recent evidences show that exoelectrogens can sense the potential changes of external surfaces and alter their EET strategies accordingly, which imparts them remarkable abilities in adapting to diverse and redox-variable environment. This mini-review provides a condensed overview and critical analysis about the recent discoveries on redox-dependent EET pathways of exoelectrogens, with focus on Geobacter sulfurreducens and Shewanella oneidensis. We summarize the detailed responses of various EET components, analyze the drives and mechanisms of such responses, highlight the diversity of EET dynamics among different bacterial species and under integrated effects of redox potential and surface chemistry, and discusses the future research needs.

Probing Microbial Extracellular Respiration Ability Using Riboflavin

Electrochemically active bacteria (EAB) are capable of extracellular electron transfer (EET) to insoluble metal oxides, and thus play a great role in the fields of environment, energy, and geosciences. However, rapid and accurate quantification of the EET ability of EAB is still challenging. In this work, we develop a riboflavin-based fluorescence method for facile, accurate, and in situ measurement of the EET ability of EAB. This method is successfully used to quantify the single-cellular EET ability of Geobacter sulfurreducens DL-1 (60.29 ± 13.02 fA) and Shewanella oneidensis MR-1 (2.11 ± 0.47 fA), the two widely present EAB in the environment. It also enables quantitative identification of EET-related c-type cytochromes in the outer membrane of S. oneidensis MR-1. This method provides a useful tool to rapidly identify EAB in diverse environments and elucidate their electron transfer mechanisms.

Rediverting Electron Flux with an Engineered CRISPR-ddAsCpf1 System to Enhance the Pollutant Degradation Capacity of Shewanella oneidensis

Pursuing efficient approaches to promote the extracellular electron transfer (EET) of extracellular respiratory bacteria is essential to their application in environmental remediation and waste treatment. Here, we report a new strategy of tuning electron flux by clustered regularly interspaced short palindromic repeat (CRISPR)-ddAsCpf1-based rediverting (namely STAR) to enhance the EET capacity of Shewanella oneidensis MR-1, a model extracellular respiratory bacterium widely present in the environment. The developed CRISPR-ddAsCpf1 system enabled approximately 100% gene repression with the green fluorescent protein (GFP) as a reporter. Using a WO₃ probe, 10 representative genes encoding for putative competitive electron transfer proteins were screened, among which 7 genes were identified as valid targets for EET enhancement. Repressing the valid genes not only increased the transcription level of the l-lactate metabolism genes but also affected the genes involved in direct and indirect EET. Increased riboflavin production was also observed. The feasibility of this strategy to enhance the bioreduction of methyl orange, an organic pollutant, and chromium, a typical heavy metal, was demonstrated. This work implies a great potential of the STAR strategy with the CIRPSR-ddAsCpf1 system for enhancing bacterial EET to favor more efficient environmental remediation applications.

Recovery of Metals from Acid Mine Drainage by Bioelectrochemical System Inoculated with a Novel Exoelectrogen, Pseudomonas sp. E8

Acid mine drainage (AMD) is a typical source of environmental pollution ascribing to its characteristics of high acidity and heavy metal content. Currently, most strategies for AMD treatment merely focus on metal removal rather than metal recovery. However, bioelectrochemical system (BES) is a promising technology to simultaneously remove and recover metal ions from AMD. In this study, both cupric ion and cadmium ion in simulated AMD were effectively recovered by BES inoculated with a novel exoelectrogen, Pseudomonas sp. E8, that was first isolated from the anodic electroactive biofilm of a microbial fuel cell (MFC) in this study. Pseudomonas sp. E8 is a facultative anaerobic bacterium with a rod shape, 0.43–0.47 μm wide, and 1.10–1.30 μm long. Pseudomonas sp. E8 can agglomerate on the anode surface to form a biofilm in the single-chamber MFC using diluted Luria-Bertani (LB) medium as an energy substrate. A single-chamber MFC containing the electroactive Pseudomonas sp. E8 biofilms has a maximum output voltage of 191 mV and a maximum power density of 70.40 mW/m², which is much higher than those obtained by most other exoelectrogenic strains in the genus of Pseudomonas. Almost all the Cu²⁺ (99.95% ± 0.09%) and Cd²⁺ (99.86% ± 0.04%) in simulated AMD were selectively recovered by a microbial fuel cell (MFC) and a microbial electrolysis cell (MEC). After the treatment with BES, the high concentrations of Cu²⁺(184.78 mg/L), Cd²⁺(132.25 mg/L), and total iron (49.87 mg/L) in simulated AMD were decreased to 0.02, 0.19, and 0 mg/L, respectively. Scanning electron micrograph (SEM), energy dispersive X-ray spectrometry (EDXS) and X-ray diffraction (XRD) analysis indicate that the Cu²⁺ and Cd²⁺ in simulated AMD were selectively recovered by microbial electrochemical reduction as Cu⁰ (together with trace amounts of Cu₂O) or Cd⁰ on the cathode surface. Collectively, data suggest that Pseudomonas sp. E8 has great potential for AMD treatment and metal recovery.

A Synthetic Plasmid Toolkit for Shewanella oneidensis MR-1

Shewanella oneidensis MR-1 is a platform microorganism for understanding extracellular electron transfer (EET) with a fully sequenced and annotated genome. In comparison to other model microorganisms such as Escherichia coli, the available plasmid parts (such as promoters and replicons) are not sufficient to conveniently and quickly fine-tune the expression of multiple genes in S. oneidensis MR-1. Here, we constructed and characterized a plasmid toolkit that contains a set of expression vectors with a combination of promoters, replicons, antibiotic resistance genes, and an RK2 origin of transfer (oriT) cassette, in which each element can be easily changed by fixed restriction enzyme sites. The expression cassette is also compatible with BioBrick synthetic biology standards. Using green fluorescent protein (GFP) as a reporter, we tested and quantified the strength of promoters. The copy number of different replicons was also measured by real-time quantitative PCR. We further transformed two compatible plasmids with different antibiotic resistance genes into the recombinant S. oneidensis MR-1, enabling control over the expression of two different fluorescent proteins. This plasmid toolkit was further used for overexpression of the MtrCAB porin-c-type cytochrome complex in the S. oneidensis ΔmtrA strain. Tungsten trioxide (WO₃) reduction and microbial fuel cell (MFC) assays revealed that the EET efficiency was improved most significantly when MtrCAB was expressed at a moderate level, thus demonstrating the utility of the plasmid toolkit in the EET regulation in S. oneidensis. The plasmid toolkit developed in this study is useful for rapid and convenient fine-tuning of gene expression and enhances the ability to genetically manipulate S. oneidensis MR-1.

Photosensitization of electro-active microbes for solar assisted carbon dioxide transformation

Tandem bio-inorganic platform by combining efficient light harvesting properties of nano-inorganic semiconductor cadmium sulfide (CdS) with biocatalytic ability of electro-active bacteria (EAB) towards carbon dioxide (CO₂) conversion is reported. Sulfur was obtained from either cysteine (EAB-Cys-CdS) or hydrogen sulfide (EAB-H₂S-CdS) and experiments were carried out under similar conditions. Anchoring of the nano CdS cluster on the microbe surface was confirmed using electronic microscope. Bio-inorganic hybrid system was able to produce single and multi-carbon compounds from CO₂ in visible spectrum (λ > 400 nm). Though, acetic acid was dominant (EAB-Cys-CdS, 1.46 g/l and EAB-H₂S-CdS, 1.55 g/l) in both the microbe-CdS hybrids, its concentration as well as product slate varied significantly. EAB-H₂S-CdS produced hexanoic acid and less methanol fraction, while the EAB-Cys-CdS produced no hexanoic acid along with almost double the concentration of methanol. Due to easy harvesting process, this bio-inorganic hybrid represents unique sustainable approach for solar-to-chemical production via CO₂ transformation.

Nanostructure-induced performance degradation of WO3·nH2O for energy conversion and storage devices

Although 2D layered nanomaterials have been intensively investigated towards their application in energy conversion and storage devices, their disadvantages have rarely been explored so far especially compared to their 3D counterparts. Herein, WO₃·nH₂O (n = 0, 1, 2), as the most common and important electrochemical and electrochromic active nanomaterial, is synthesized in 3D and 2D structures through a facile hydrothermal method, and the disadvantages of the corresponding 2D structures are examined. The weakness of 2D WO₃·nH₂O originates from its layered structure. X-ray diffraction and scanning electron microscopy analyses of as-grown WO₃·nH₂O samples suggest a structural transition from 2D to 3D upon temperature increase. 2D WO₃·nH₂O easily generates structural instabilities by 2D intercalation, resulting in a faster performance degradation, due to its weak interlayer van der Waals forces, even though it outranks the 3D network structure in terms of improved electronic properties. The structural transformation of 2D layered WO₃·nH₂O into 3D nanostructures is observed via ex situ Raman measurements under electrochemical cycling experiments. The proposed degradation mechanism is confirmed by the morphology changes. The work provides strong evidence for and in-depth understanding of the weakness of 2D layered nanomaterials and paves the way for further interlayer reinforcement, especially for 2D layered transition metal oxides.

Decomposable quantum-dots/DNA nanosphere for rapid and ultrasensitive detection of extracellular respiring bacteria

Extracellular respiring bacteria (ERB) are a group of bacteria capable of transferring electrons to extracellular acceptors and have important application in environmental remediation. In this study, a decomposable quantum-dots (QDs)/DNA nanosphere probe was developed for rapid and ultrasensitive detection of ERB. The QDs/DNA nanosphere was self-assembled from QDs-streptavidin conjugate (QDs-SA) and Y-shaped DNA nanostructure that is constructed based on toehold-mediated strand displacement. It can release numerous fluorescent QDs-SA in immunomagnetic separation (IMS)-based immunoassay via simple biotin displacement, which remarkably amplifies the signal of antigen-antibody recognizing event. This QDs/DNA-nanosphere-based IMS-fluorescent immunoassay is ultrasensitive for model ERB Shewanella oneidensis, showing a wide detection range between 1.0 cfu/mL and 1.0 × 10⁸ cfu/mL with a low detection limit of 1.37 cfu/mL. Moreover, the proposed IMS-fluorescent immunoassay exhibits high specificity, acceptable reproducibility and stability. Furthermore, the proposed method shows acceptable recovery (92.4-101.4%) for detection of S. oneidensis spiked in river water samples. The proposed IMS-fluorescent immunoassay advances an intelligent strategy for rapid and ultrasensitive quantitation of low-abundance analyte and thus holds promising potential in food, medical and environmental applications.

Chitin degradation and electricity generation by Aeromonas hydrophila in microbial fuel cells

Chitin is one of the most abundant biopolymers in nature and the main composition of shrimp and crab shells (usually as food wastes). Thus it is essential to investigate the potential of degrading chitin for energy recovery. This study investigated the anaerobic degradation of chitin by Aeromonas hydrophila, a chitinolytic and popular electroactive bacterium, in both fermentation and microbial fuel cell (MFC) systems. The primary chitin metabolites produced in MFC were succinate, lactate, acetate, formate, and ethanol. The total metabolite concentration from chitin degradation increased seven-fold in MFC compared to the fermentation system, as well as additional electricity generation. Moreover, A. hydrophila degraded GlcNAc (the intermediate of chitin hydrolysis) significantly faster (0.97 and 0.94 mM C/d/mM-GlcNAc) than chitin (0.13 and 0.03 mM C/d/mM-GlcNAc) in MFC and fermentation systems, indicating that extracellular hydrolysis of chitin was the rate-limiting step and this step could be accelerated in MFC. Furthermore, more chemicals produced by the addition of exogenous mediators in MFC. This study proves that the chitin could be degraded effectively by an electroactive bacterium in MFC, and our results suggest that this bioelectrochemical system might be useful for the degradation of recalcitrant biomass to recover energy.

Redox properties of extracellular polymeric substances (EPS) from electroactive bacteria

Although the capacity for electroactive bacteria to convert environmental metallic minerals and organic pollutants is well known, the role of the redox properties of microbial extracellular polymeric substances (EPS) in this process is poorly understood. In this work, the redox properties of EPS from two widely present electroactive bacterial strains (Shewanella oneidensis and Pseudomonas putida) were explored. Electrochemical analysis demonstrates that the EPS extracted from the two strains exhibited redox properties. Spectroelectrochemical and protein electrophoresis analyses indicate that the extracted EPS from S. oneidensis and P. putida contained heme-binding proteins, which were identified as the possible redox components in the EPS. The results of heme-mediated behavior of EPS may provide an insight into the important roles of EPS in electroactive bacteria to maximize their redox capability for biogeochemical cycling, environmental bioremediation and wastewater treatment.

Tungsten Oxide Materials for Optoelectronic Applications

Tungsten oxide is a versatile transition-metal oxide with a vast number of polymorphs and sub-stoichiometric compositions, featuring innate tunnels and oxygen vacancies. The structure-determined nature, such as altered optical absorption and metal-like conductivity, makes tungsten oxide an attractive candidate for optoelectronic applications. A brief summary of the recent progress in tungsten oxide for optoelectronic applications is provided, including not only the traditional field of electrochromism/photochromism, but also new areas of application, such as visible-light-driven photocatalysis, photothermal therapy, and surface enhanced Raman spectroscopy (SERS). Also, the prospects for future applications of tungsten oxide are summarized and highlighted.

An MFC-based online monitoring and alert system for activated sludge process

In this study, based on a simple, compact and submersible microbial fuel cell (MFC), a novel online monitoring and alert system with self-diagnosis function was established for the activated sludge (AS) process. Such a submersible MFC utilized organic substrates and oxygen in the AS reactor as the electron donor and acceptor respectively, and could provide an evaluation on the status of the AS reactor and thus give a reliable early warning of potential risks. In order to evaluate the reliability and sensitivity of this online monitoring and alert system, a series of tests were conducted to examine the response of this system to various shocks imposed on the AS reactor. The results indicate that this online monitoring and alert system was highly sensitive to the performance variations of the AS reactor. The stability, sensitivity and repeatability of this online system provide feasibility of being incorporated into current control systems of wastewater treatment plants to real-time monitor, diagnose, alert and control the AS process.

Conductive carbon nanotube hydrogel as a bioanode for enhanced microbial electrocatalysis

Enhancing microbial electrocatalysis through new material design is essential to the efficient and stable operation of bio-electrochemical system (BES). In this work, a novel conductive carbon nanotube (CNT) hydrogel was fabricated by electrodepositing both CNT and chitosan onto a carbon paper electrode and used as a BES anode electrode. The microscopic, spectroscopic, and electrochemical analytical results show that the CNT hydrogel exhibited an excellent electrochemical activity. In the BES tests, the current generation and the maximum power density of the MFC with the CNT hydrogel increased by 23% and 65%, respectively, compared with the control. This demonstrates that the utilization of such a hydrogel offers an effective approach to enhance the current generation of BES. The great conductivity of CNT and the high content of oxygen-containing functional groups (C-OH, C═O, etc.) on their surface were found to be responsible for the improvements. Our work provides a facile way to prepare appropriate BES electrodes and offers a straightforward and effective route to enhance the BES performance.