Design of biocompatible and biodegradable polymers based on intermediate water concept

Biological Surface Layer Formation on Bioceramic Particles for Protein Adsorption

In the biomedical fields of bone regenerative therapy, the immobilization of proteins on the bioceramic particles to maintain their highly ordered structures is significantly important. In this review, we comprehensively discussed the importance of the specific surface layer, which can be called "non-apatitic layer", affecting the immobilization of proteins on particles such as hydroxyapatite and amorphous silica. It was suggested that the water molecules and ions contained in the non-apatitic layer can determine and control the protein immobilization states. In amorphous silica particles, the direct interactions between proteins and silanol groups make it difficult to immobilize the proteins and maintain their highly ordered structures. Thus, the importance of the formation of a surface layer consisting of water molecules and ions (i.e., a non-apatitic layer) on the particle surfaces for immobilizing proteins and maintaining their highly ordered structures was suggested and described. In particular, chlorine-containing amorphous silica particles were also described, which can effectively form the surface layer of protein immobilization carriers. The design of the bio-interactive and bio-compatible surfaces for protein immobilization while maintaining the highly ordered structures will improve cell adhesion and tissue formation, thereby contributing to the construction of social infrastructures to support super-aged society.

Calcium Orthophosphate (CaPO4) Containing Composites for Biomedical Applications: Formulations, Properties, and Applications

The goal of this review is to present a wide range of hybrid formulations and composites containing calcium orthophosphates (abbreviated as CaPO4) that are suitable for use in biomedical applications and currently on the market. The bioactive, biocompatible, and osteoconductive properties of various CaPO4-based formulations make them valuable in the rapidly developing field of biomedical research, both in vitro and in vivo. Due to the brittleness of CaPO4, it is essential to combine the desired osteologic properties of ceramic CaPO4 with those of other compounds to create novel, multifunctional bone graft biomaterials. Consequently, this analysis offers a thorough overview of the hybrid formulations and CaPO4-based composites that are currently known. To do this, a comprehensive search of the literature on the subject was carried out in all significant databases to extract pertinent papers. There have been many formulations found with different material compositions, production methods, structural and bioactive features, and in vitro and in vivo properties. When these formulations contain additional biofunctional ingredients, such as drugs, proteins, enzymes, or antibacterial agents, they offer improved biomedical applications. Moreover, a lot of these formulations allow cell loading and promote the development of smart formulations based on CaPO4. This evaluation also discusses basic problems and scientific difficulties that call for more investigation and advancements. It also indicates perspectives for the future.

Recent Advances in the Fabrication and Performance Optimization of Polyvinyl Alcohol Based Vascular Grafts

Cardiovascular disease is one of the diseases with the highest morbidity and mortality rates worldwide, and coronary artery bypass grafting (CABG) is a fast and effective treatment. More researchers are investigating in artificial blood vessels due to the limitations of autologous blood vessels. Despite the availability of large-diameter vascular grafts (Ø > 6 mm) for clinical use, small-diameter vascular grafts (Ø < 6 mm) have been a challenge for researchers to overcome in recent years. Vascular grafts made of polyvinyl alcohol (PVA) and PVA-based composites have excellent biocompatibility and mechanical characteristics. In order to gain a clearer and more specific understanding of the progress in PVA vascular graft research, particularly regarding the preparation methods, principles, and functionality of PVA vascular graft, this article discusses the mechanical properties, biocompatibility, blood compatibility, and other properties of PVA vascular graft prepared or enhanced with different blends using various techniques that mimic natural blood vessels. The findings reveal the feasibility and promising potential of PVA or PVA-based composite materials as vascular grafts.

Enhancing thromboresistance of neurovascular nickel-titanium devices with responsive heparin hydrogel coatings

BACKGROUND

Neurointerventional devices, particularly laser-cut thin-strut stents made of self-expanding nickel-titanium alloy, are increasingly utilized for endovascular applications in intracranial arteries and dural venous sinuses. Preventing thrombosis and stroke necessitates systemic anticoagulant and antiplatelet therapies with the risk of bleeding complications. Antithrombotic coatings present a promising solution.

METHODS

In this study, we investigated the potential of hydrogels composed of four-armed poly(ethylene glycol) (starPEG) and heparin, with or without coagulation-responsive heparin release, as coatings for neurovascular devices to mitigate blood clot formation. We evaluated the feasibility and efficacy of these coatings on neurovascular devices through in vitro Chandler-Loop assays and implantation experiments in the supra-aortic arteries of rabbits.

RESULTS

Stable and coagulation-responsive starPEG-heparin hydrogel coatings exhibited antithrombotic efficacy in vitro, although with a slightly reduced thromboprotection observed in vivo. Furthermore, the hydrogel coatings demonstrated robustness against shear forces encountered during deployment and elicited only marginal humoral and cellular inflammatory responses compared with the reference standards.

CONCLUSION

Heparin hydrogel coatings offer promising benefits for enhancing the hemocompatibility of neurointerventional devices made of self-expanding nickel-titanium alloy. The variance in performance between in vitro and in vivo settings may be attributed to differences in low- and high-shear blood flow conditions inherent to these models. These models may represent the differences in venous and arterial systems. Further optimization is warranted to tailor the hydrogel coatings for improved efficacy in arterial applications.

Protein adsorption on blood-contacting surfaces: A thermodynamic perspective to guide the design of antithrombogenic polymer coatings

Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. Thrombosis is fundamentally initiated by the nonspecific adsorption of proteins to the material surface, which is strongly governed by thermodynamic factors established by the nature of the interaction between the material surface, surrounding water molecules, and the protein itself. Along these lines, different surface materials (such as polymeric, metallic, ceramic, or composite) induce different entropic and enthalpic changes at the surface-protein interface, with material wettability significantly impacting this behavior. Consequently, protein adsorption on medical devices can be modulated by altering their wettability and surface energy. A plethora of polymeric coating modifications have been utilized for this purpose; hydrophobic modifications may promote or inhibit protein adsorption determined by van der Waals forces, while hydrophilic materials achieve this by mainly relying on hydrogen bonding, or unbalanced/balanced electrostatic interactions. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications. STATEMENT OF SIGNIFICANCE: Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. A plethora of polymeric coating modifications have been utilized for addressing this issue. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications.

Control of Biological Surface States on Chlorine-Doped Amorphous Silica Particles and Their Effective Absorptive Ability for Antibody Protein

Amorphous silica particles (ASPs) have low biotoxicity and are used in foodstuffs; however, the adsorption states of proteins on their surfaces have not yet been clarified. If the adsorption states can be clarified and controlled, then a wide range of biological and medical applications can be expected. The conventional amorphous silica particles have the problem of protein adsorption due to the strong interaction with their dense silanol groups and denaturation. In this study, the surfaces of amorphous silica particles with a lower silanol group density were modified with a small amount of chlorine during the synthesis process to form a specific surface layer by adsorbing water molecules and ions in the biological fluid, thereby controlling the protein adsorption state. Specifically, the hydration state on the surface of the amorphous silica particles containing trace amounts of chlorine was evaluated, and the surface layer (especially the hydration state) for the adsorption of antibody proteins while maintaining their steric structures was evaluated and discussed. The results showed that the inclusion of trace amounts of chlorine increased the silanol groups and Si-Cl bonds in the topmost surface layer of the particles, thereby inducing the adsorption of ions and water molecules in the biological fluid. Then, it was found that a novel surface layer was formed by the effective adsorption of Na and phosphate ions, which would change the proportion of the components in the hydration layer. In particular, the proportion of the free water component increased by 21% with the doping of chlorine. Antibody proteins were effectively adsorbed on the particles doped with trace amounts of chlorine, and their steric adsorption states were evaluated. It was found that the proteins were clearly adsorbed and maintained the steric state of their secondary structure. In the immunoreactivity tests using streptavidin and biotin, biotin bound to the chlorine-doped particles showed efficient reactivity. In conclusion, this study is the first to discover the surface layer of the amorphous silica particles to maintain the steric structures of adsorbed proteins, which is expected to be used as a carrier particle for antibody test kits and immunochromatography.

Detailed dynamical features of the slow hydration water in the vicinity of poly(ethylene oxide) chains

Poly(ethylene oxide) (PEO) is a well-known biocompatible polymer and has widely been used for medical applications. Recently, we have investigated the dynamic behavior of hydration water in the vicinity of PEO chains at physiological temperature and shown the presence of slow water with diffusion coefficient one order of magnitude less than that of bulk water. This could be evidence for the intermediate water that is critical for biocompatibility; however, its detailed dynamical features were not established. In this article, we analyze the quasi-elastic neutron scattering from hydration water through mode distribution analysis and present a microscopic picture of hydration water as well as its relation to cold crystallization.

Evaluation of the Modification Effects of Heparin/Dalteparin on Silk Fibroin Structure and Physical Properties for Skin Wound Healing

We have developed a functionalized silk fibroin (BSF) that can serve as an improved fundamental material for dressings by specifically capturing growth factors secreted during the healing process and supplying them to cells accumulated in the wound area to enhance the tissue regeneration efficiency. When considering the design of heparin-modified BSF, there is a difficulty with binding to high-molecular-weight polysaccharides without disrupting the hydrophobic crystalline structure of the BSF. In this study, a low-molecular-weight pharmaceutical heparin, dalteparin, was selected and cross-linked with the tyrosine residue presence in the BSF non-crystalline region. When targeting 3D porous applications like nanofiber sheets, as it is crucial not only to enhance biological activity but also to improve handling by maintaining stability in water and mechanical strength, a trade-off between improved cell affinity and reduced mechanical strength depending on crystalline structure was evaluated. The use of dalteparin maintained the mechanical strength better than unfractionated heparin by reducing the effect on disturbing BSF recrystallization. Film surface hydrophilicity and cell proliferation induction were significantly higher in the dalteparin group. For BSF functionalization, using purified heparin was an effective approach that achieved a balance between preserving the mechanical properties and induction of tissue regeneration, offering the potential for various forms in the future.

Hydrogen-Bonded Structures of Water Molecules in Hydroxy-Functionalized Nanochannels of Columnar Liquid Crystalline Nanostructured Membranes Studied by Soft X-ray Emission Spectroscopy

Here, we report a synchrotron-based high-resolution soft X-ray emission spectroscopy study on hydrogen-bonded structures of water molecules in the self-organized, hydroxy-group-functionalized one-dimensional nanochannels of liquid crystalline nanostructured membranes. The water molecules confined in the uncharged hydroxy-functionalized nanochannels (which have a diameter of about 1.5 nm) exhibit hydrogen-bonded structures close to those of bulk liquid water, even directly interacting with diol groups. These hydrogen-bonded structures contrast with the more distorted hydrogen bonding of water molecules confined in self-organized channels with a diameter of 0.6 nm formed by an analogous nanostructured membrane with a cationic moiety, which was explained by the ability of the channel functional groups to donate and accept hydrogen bonds in a confined space and the nanochannel diameter.

Flow diverter stents for endovascular treatment of aneurysms: a comparative study of efficacy and safety between FREDX and FRED

BACKGROUND

The FRED X flow diverter (FREDX), as the second generation in the FRED series, aims to improve the treatment of cerebral aneurysms. This study compares the efficacy and safety of FREDX with its predecessor, FRED.

METHODS

This prospective registry included patients treated with FRED and FREDX devices. Efficacy was assessed using digital subtraction angiography with 3D volumetric reconstruction at immediate and 1 year follow-ups. Safety was evaluated by recording complications, analyzed through univariate contrasts, generalized mixed models, and Bayesian network analyses.

RESULTS

We treated 287 patients with 385 aneurysms, with 77.9% receiving FRED and 22.1% FREDX. The median age was 55 years (IQR 47-65) and 78.4% were women. The FREDX group showed a higher prevalence of saccular-like aneurysms (70.6% vs 52.7%, P=0.012) and a higher rate of complete occlusion compared with FRED interventions (79.4% vs 59.3%, P=0.022). After adjusting for confounders, these differences represented a 3.04-fold increased likelihood (95% CI 1.44 to 6.41, P=0.003) of achieving complete occlusion at 1 year with FREDX interventions. Regarding safety, two (3.5%) complications (both non-symptomatic) were observed in the FREDX group and 23 (10.4%) in the FRED group (P=0.166). Bayesian network analysis suggested a trend towards fewer complications for FREDX, with a median reduction of 5.5% in the posterior distribution of the prevalence of complications compared with FRED interventions.

CONCLUSIONS

The FREDX device shows improved complete occlusion rates at 1 year compared with the FRED device while maintaining a favourable safety profile, indicating its potential advantage in the treatment of cerebral aneurysms.

Advances in Wireless, Batteryless, Implantable Electronics for Real-Time, Continuous Physiological Monitoring

This review summarizes recent progress in developing wireless, batteryless, fully implantable biomedical devices for real-time continuous physiological signal monitoring, focusing on advancing human health care. Design considerations, such as biological constraints, energy sourcing, and wireless communication, are discussed in achieving the desired performance of the devices and enhanced interface with human tissues. In addition, we review the recent achievements in materials used for developing implantable systems, emphasizing their importance in achieving multi-functionalities, biocompatibility, and hemocompatibility. The wireless, batteryless devices offer minimally invasive device insertion to the body, enabling portable health monitoring and advanced disease diagnosis. Lastly, we summarize the most recent practical applications of advanced implantable devices for human health care, highlighting their potential for immediate commercialization and clinical uses.

Optically Transparent and Color-Stable Elastomer with Structural Coloration under Elongation

Optically transparent and colored elastomers with high toughness are expected to play an important role in the construction of advanced medical materials, wearable displays, and soft robots. In this study, we found that composite elastomers consisting of amorphous SiO2 particles homogeneously dispersed in high concentrations within a biocompatible acrylic polymer network exhibit optical transparency and bright structural colors. In the composite elastomers, the system in which the SiO2 particles form a colloidal amorphous array hardly changes its structural color hue despite deformation due to elongation. Furthermore, the composite elastomer of the SiO2 particles with the acrylic polymer network also results in high mechanical toughness. In summary, we have shown that the elastomer that exhibits fade-resistant structural coloration formed from safe materials can combine stable coloration and mechanical strength independent of their shape. This is expected to have new potential in future technologies to support our daily life.

Low-Temperature Behaviors, Cold Crystallization, and Glass Transition in Poly(vinylpyrrolidone) Aqueous Solution

Intermediate water is a kind of water around the biocompatible polymer, such as poly(vinylpyrrolidone) (PVP), that exhibits the phenomenon of cold crystallization. We investigate the low-temperature behavior of PVP aqueous solution using small- and wide-angle X-ray scattering and total neutron scattering measurements. The ice formation speed of the intermediate water is extremely reduced by confinement in the PVP moiety during the cooling process. However, around the glass transition temperature, the water-rich phase expands and orders the hydrogen-bond network, behaving as ice nuclei. During the heating process, cubic ice is formed first and then fills the water-rich region. After saturation of the cubic ice formation, the ice transforms from the cubic to the hexagonal ice form.

Flow diverter surface modifications for aneurysm treatment: A review of the mechanisms and data behind existing technologies

Flow diversion (FD) has become a mainstay treatment for large wide-necked aneurysms. Despite excellent safety and efficacy, the risk of thromboembolic complications necessitates the use of dual antiplatelet therapy (DAPT). The use of DAPT makes hemorrhagic complications of stenting carry high morbidity and mortality. Additionally, DAPT usage carries a risk of "nuisance" complications that do not directly impact intracranial circulation but need to be managed nonetheless. To circumvent this issue, the most recent generation of flow diverters have undergone surface modification with various compounds to confer blood compatibility to limit clotting and thrombosis. While these newer generation flow diverters are marketed to enhance ease of deployment, the goal is to eventually facilitate single antiplatelet use with flow diverter treatment. This generation of FDs have potential to expand indications beyond unruptured wide-necked aneurysms to include ruptured intracranial aneurysms without the necessity of DAPT. Currently, no comprehensive review details the molecular mechanisms and pre-clinical and clinical data on these modifications. We seek to fill this gap in the literature by consolidating information on the coating technology for four major FDs currently in clinical use-PipelineTM Flex and Vantage Shield TechnologyTM, FREDTMX, p48/64 hydrophilic coating, and Acandis Dervio® 2heal-to serve as a reference guide in neurointerventional aneurysm treatment. Although the Balt silkTM was one of the first FDs, it is uncoated, thus we will not cover this device in our review. A literature review was performed to obtain information on each coating technology for the major flow diverters currently on the market using international databases (PUBMED, Embase, Medline, Google Scholar). The search criteria used the keywords for each coating technology of interest "phosphorylcholine," "poly 2-methoxyethyl acrylate," "hydrophilic polymer coating," and "fibrin-heparin" Keywords related to the device names "Pipeline Shield," "Pipeline Shield with Flex Technology," "FRED," "FREDX," "p64," "p64-HPC," "Derivo 2heal" were also used. Studies that detailed the mechanism of action of the coating, any pre-clinical studies with surface-modified intravascular devices, and any clinical retrospective series, prospective series, or randomized clinical trials with surface-modified devices for aneurysm treatment were included.

Surface modification of neurovascular stents: from bench to patient

Flow-diverting stents (FDs) for the treatment of cerebrovascular aneurysms are revolutionary. However, these devices require systemic dual antiplatelet therapy (DAPT) to reduce thromboembolic complications. Given the risk of ischemic complications as well as morbidity and contraindications associated with DAPT, demonstrating safety and efficacy for FDs either without DAPT or reducing the duration of DAPT is a priority. The former may be achieved by surface modifications that decrease device thrombogenicity, and the latter by using coatings that expedite endothelial growth. Biomimetics, commonly achieved by grafting hydrophilic and non-interacting polymers to surfaces, can mask the device surface with nature-derived coatings from circulating factors that normally activate coagulation and inflammation. One strategy is to mimic the surfaces of innocuous circulatory system components. Phosphorylcholine and glycan coatings are naturally inspired and present on the surface of all eukaryotic cell membranes. Another strategy involves linking synthetic biocompatible polymer brushes to the surface of a device that disrupts normal interaction with circulating proteins and cells. Finally, drug immobilization can also impart antithrombotic effects that counteract normal foreign body reactions in the circulatory system without systemic effects. Heparin coatings have been explored since the 1960s and used on a variety of blood contacting surfaces. This concept is now being explored for neurovascular devices. Coatings that improve endothelialization are not as clinically mature as anti-thrombogenic coatings. Coronary stents have used an anti-CD34 antibody coating to capture circulating endothelial progenitor cells on the surface, potentially accelerating endothelial integration. Similarly, coatings with CD31 analogs are being explored for neurovascular implants.

Poly(2-methoxyethyl acrylate) (PMEA) improves the thromboresistance of FRED flow diverters: a thrombogenic evaluation of flow diverters with human blood under flow conditions

BACKGROUND

Surface modification of flow-diverting stents has been explored to reduce thrombus-related complications that may arise under clinical use. This study investigated the thromboresistant properties of the flow redirection endoluminal device (FRED) X, a flow diverter treated with a copolymer of poly(2-methoxyethyl acrylate) (PMEA; X Technology).

METHODS

The performance of FRED, FRED X, and Pipeline Flex with Shield Technology (sPED) was evaluated in an in vitro blood loop model. Blood activation level was assessed by the concentration of thrombin-antithrombin complex (TAT), β-thromboglobulin (β-TG), and platelet count, and qualitatively by scanning electron microscopy (SEM). Cellular adhesion characteristics were measured using human aortic endothelial cells that were seeded on flat sheets mimicking the surface of FRED, FRED X, and sPED, and evaluated with fluorescence microscopy. Statistical comparisons were conducted using one-way analysis of variance (ANOVA) with Tukey post hoc tests.

RESULTS

FRED X, sPED, and control blood loops showed significantly reduced blood activation levels (TAT and β-TG) compared with FRED (p<0.01). Consequently, FRED showed a significant decrease in platelet count compared with FRED X, sPED, and control loops (p<0.01). SEM imaging showed the lowest accumulation of blood cell-like deposits on FRED X compared with sPED and FRED, while FRED had the highest accumulation. Endothelial cells adhered and were widely spread on X Technology-treated sheets, while minimal cell adhesion was observed on phosphorylcholine-treated sheets.

CONCLUSION

The X Technology surface modification of FRED X demonstrated superior thromboresistant properties over untreated FRED while maintaining comparable cellular adhesion. Taken together, these properties may help mitigate material-related thromboembolic complications.

A review on the hydration properties of dietary fibers derived from food waste and their interactions with other ingredients: opportunities and challenges for their application in the food industry

Dietary fiber (DF) significantly affects the quality attributes of food matrices. Depending on its chemical composition, molecular structure, and degree of hydration, the behavior of DF may differ. Numerous reports confirm that incorporating DF derived from food waste into food products has significant effects on textural, sensory, rheological, and antimicrobial properties. Additionally, the characteristics of DF, modification techniques (chemical, enzymatic, mechanical, thermal), and processing conditions (temperature, pH, ionic strength), as well as the presence of other components, can profoundly affect the functionalities of DF. This review aims to describe the interactions between DF and water, focusing on the effects of free water, freezing-bound water, and unfreezing-bound water on the hydration capacity of both soluble and insoluble DF. The review also explores how the structural, functional, and environmental properties of DF contribute to its hydration capacity. It becomes evident that the interactions between DF and water, and their effects on the rheological properties of food matrices, are complex and multifaceted subjects, offering both opportunities and challenges for further exploration. Utilizing DF extracted from food waste exhibits promise as a sustainable and viable strategy for the food industry to create nutritious and high-value-added products, while concurrently reducing reliance on primary virgin resources.

Contrasting Changes in Strongly and Weakly Bound Hydration Water of a Protein upon Denaturation

Water is considered integral for the stabilization and function of proteins, which has recently attracted significant attention. However, the microscopic aspects of water ranging up to the second hydration shell, including strongly and weakly bound water at the sub-nanometer scale, are not yet well understood. Here, we combined terahertz spectroscopy, thermal measurements, and infrared spectroscopy to clarify how the strongly and weakly bound hydration water changes upon protein denaturation. With denaturation, that is, the exposure of hydrophobic groups in water and entanglement of hydrophilic groups, the number of strongly bound hydration water decreased, while the number of weakly bound hydration water increased. Even though the constraint of water due to hydrophobic hydration is weak, it extends to the second hydration shell as it is caused by the strengthening of hydrogen bonds between water molecules, which is likely the key microscopic mechanism for the destabilization of the native state due to hydration.

Influence of Molecular Structures of Organic Foulants on the Antifouling Properties of Poly(2-methoxyethyl acrylate) and Its Analogs: A Molecular Dynamics Study

Elucidating the fouling phenomena of polymer surfaces will facilitate the molecular design of high-performance biomedical devices. Here, we investigated the remarkable antifouling properties of two acrylate materials, poly(2-methoxyethyl acrylate) (PMEA) and poly(3-methoxypropionic acid vinyl ester) (PMePVE), which have a terminal methoxy group on the side chain, via molecular dynamics simulations of binary mixtures of acrylate/methacrylate trimers with n-pentane or 2,2-dimethylpropane (neopentane), that serve as the nonpolar organic probe (organic foulants). The second virial coefficient (B₂) was determined to assess the aggregation/dispersion properties in the binary mixtures. The order of the B₂ values for the trimer/pentane mixtures indicated that the terminal methoxy group of the side chain plays an important role in enhancing the fouling resistance to nonpolar organic foulants. Here, we hypothesized that the antifouling properties of PMEA/PMePVE surfaces originate from the resistance. To evaluate the molecular-level accessibility of organic foulants to acrylate/methacrylate materials, we examined the radial distribution functions (RDFs) of the terminal methyl groups of neopentane around the main chains of the acrylate/methacrylate trimers. As a result, the third distinct RDF peaks are observed only for the methacrylate trimers. The peaks are attributed to the hydrophobic interactions between the methyl group of neopentane and that of the main chain of the trimer. Accordingly, the methyl group of the main chain of methacrylate materials, such as poly(2-hydroxyethyl methacrylate) and poly(2-methoxyethyl methacrylate), unfavorably induces fouling with organic foulants. In this study, we clarify that preventing hydrophobic interactions between an organic foulant and polymeric material is essential for enhancing the antifouling property. Our approach has great potential for evaluating the molecular-level affinities of organic foulant with polymer surfaces for the molecular design of excellent antifouling polymeric materials.

Stealth and pseudo-stealth nanocarriers

The stealth effect plays a central role on capacitating nanomaterials for drug delivery applications through improving the pharmacokinetics such as blood circulation, biodistribution, and tissue targeting. Here based on a practical analysis of stealth efficiency and a theoretical discussion of relevant factors, we provide an integrated material and biological perspective in terms of engineering stealth nanomaterials. The analysis surprisingly shows that more than 85% of the reported stealth nanomaterials encounter a rapid drop of blood concentration to half of the administered dose within 1 h post administration although a relatively long β-phase is observed. A term, pseudo-stealth effect, is used to delineate this common pharmacokinetics behavior of nanomaterials, that is, dose-dependent nonlinear pharmacokinetics because of saturating or depressing bio-clearance of RES. We further propose structural holism can be a watershed to improve the stealth effect; that is, the whole surface structure and geometry play important roles, rather than solely relying on a single factor such as maximizing repulsion force through polymer-based steric stabilization (e.g., PEGylation) or inhibiting immune attack through a bio-inspired component. Consequently, engineering delicate structural hierarchies to minimize attractive binding sites, that is, minimal charges/dipole and hydrophobic domain, becomes crucial. In parallel, the pragmatic implementation of the pseudo-stealth effect and dynamic modulation of the stealth effect are discussed for future development.

Investigation of Surface Layers on Biological and Synthetic Hydroxyapatites Based on Bone Mineralization Process

In this review, the current status of the influence of added ions (i.e., SiO₄^4-, CO₃^2-, etc.) and surface states (i.e., hydrated and non-apatite layers) on the biocompatibility nature of hydroxyapatite (HA, Ca₁₀(PO₄)₆(OH)₂) is discussed. It is well known that HA is a type of calcium phosphate with high biocompatibility that is present in biological hard tissues such as bones and enamel. This biomedical material has been extensively studied due to its osteogenic properties. The chemical composition and crystalline structure of HA change depending on the synthetic method and the addition of other ions, thereby affecting the surface properties related to biocompatibility. This review illustrates the structural and surface properties of HA substituted with ions such as silicate, carbonate, and other elemental ions. The importance of the surface characteristics of HA and its components, the hydration layers, and the non-apatite layers for the effective control of biomedical function, as well as their relationship at the interface to improve biocompatibility, has been highlighted. Since the interfacial properties will affect protein adsorption and cell adhesion, the analysis of their properties may provide ideas for effective bone formation and regeneration mechanisms.

Polymerization in living organisms

Vital biomacromolecules, such as RNA, DNA, polysaccharides and proteins, are synthesized inside cells via the polymerization of small biomolecules to support and multiply life. The study of polymerization reactions in living organisms is an emerging field in which the high diversity and efficiency of chemistry as well as the flexibility and ingeniousness of physiological environment are incisively and vividly embodied. Efforts have been made to design and develop in situ intra/extracellular polymerization reactions. Many important research areas, including cell surface engineering, biocompatible polymerization, cell behavior regulation, living cell imaging, targeted bacteriostasis and precise tumor therapy, have witnessed the elegant demeanour of polymerization reactions in living organisms. In this review, recent advances in polymerization in living organisms are summarized and presented according to different polymerization methods. The inspiration from biomacromolecule synthesis in nature highlights the feasibility and uniqueness of triggering living polymerization for cell-based biological applications. A series of examples of polymerization reactions in living organisms are discussed, along with their designs, mechanisms of action, and corresponding applications. The current challenges and prospects in this lifeful field are also proposed.

Drug Delivery Systems for Localized Cancer Combination Therapy

With over 2 million cancer cases and over 600,000 cancer-associated deaths predicted in the U.S. for 2022, this life-debilitating disease continuously impacts the lives of people across the nation every day. Therapeutic treatment options for cancer have historically involved chemotherapies to eradicate tumors with cytotoxic mechanisms which can negatively affect the efficacy versus toxicity ratio of treatment. With a need for more directed and therapeutically active options, targeted small-molecule inhibitors and immunotherapies have since emerged to mitigate treatment-associated toxicities. However, aggressive tumors can employ a wide range of defense mechanisms to evade monotherapy treatment altogether, resulting in the recurrence of therapeutically resistant tumors. Therefore, many clinical routines have included combination therapy in which anticancer agents are combined to provide a synergistic attack on tumors. Even with this approach, maximizing the efficacy of cancer treatment is contingent upon the dose of drug that reaches the site of the tumor, so often therapy is administered at the site of a tumor via localized delivery platforms. Commonly used platforms for localized drug delivery include polymeric wafers, nanofibrous scaffolds, and hydrogels where drug combinations can be loaded and delivered synchronously. Attaining synergistic activity from these localized systems is dependent on proper material selection and fabrication methods. Herein, we describe these important considerations for enhancing the efficacy of cancer combination therapy through biodegradable, localized delivery systems.

Crystallization and molecular mobility in renewable semicrystalline copolymers based on polycaprolactone and polyisosorbide

A series of novel block copolymers based on two biodegradable polymers, poly(ε-caprolactone), PCL, and poly(isosorbide), PIS, with PIS fractions 5, 10, and 25 wt%, are studied herein. The aim is to assess the effects of the amorphous PIS phase on the properties of the semicrystalline PCL (majority), in addition to the synthesis strategy. The latter involved the polymerization of caprolactone onto initial PIS of low molar mass, resulting, thus, in gradually shorter PCL blocks when the starting amount of PIS is increased. The structure-property relationship investigation, with an emphasis on molecular mobility and crystallization, involves the following sum of complementary techniques: differential scanning calorimetry, dielectric spectroscopy, polarized optical microscopy and X-ray diffraction. The molecular mobility map for these PCL/PIS and initial PIS is drawn here for the first time. Despite the high glass transition temperature of PIS (T_g ∼ 51 °C) compared to that of PCL (-66 °C), the T_g of the copolymers barely changes, as it is mainly ruled by crystallinity. The latter seems to be facilitated in the copolymers, in both the amount and the rate. The local molecular mobility of PCL and PCL/PIS consists of faster γ_PCL relaxation which is unaffected in the copolymers, whereas the slower β_PCL process arising from the backbone ester group rotation exhibits a systematic deceleration in the presence of PIS. A connection between such local motions and the corresponding segmental α relaxation, observed previously in other polyesters, is also found to be true here. Apart from that, the dielectric T_g as well as the cooperativity of the polymer chains drop moderately, which indicates spatial confinement between the PCL crystals, whereas correlations with the looser lamellar chain packing within the spherulites are gained. The relaxations of initial PIS, i.e., γ_PIS, β_PIS and α_PIS, could not be resolved within the copolymers. Along with other properties, such as ionic conductivity, we conclude to the homogeneity of our systems, with sufficient PCL/PIS distribution.

Direct Cardiac Epigenetic Reprogramming through Codelivery of 5'Azacytidine and miR-133a Nanoformulation

Direct reprogramming of cardiac fibroblasts to induced cardiomyocytes (iCMs) is a promising approach to cardiac regeneration. However, the low yield of reprogrammed cells and the underlying epigenetic barriers limit its potential. Epigenetic control of gene regulation is a primary factor in maintaining cellular identities. For instance, DNA methylation controls cell differentiation in adults, establishing that epigenetic factors are crucial for sustaining altered gene expression patterns with subsequent rounds of cell division. This study attempts to demonstrate that 5'AZA and miR-133a encapsulated in PLGA-PEI nanocarriers induce direct epigenetic reprogramming of cardiac fibroblasts to cardiomyocyte-like cells. The results present a cardiomyocyte-like phenotype following seven days of the co-delivery of 5'AZA and miR-133a nanoformulation into human cardiac fibroblasts. Further evaluation of the global DNA methylation showed a decreased global 5-methylcytosine (5-medCyd) levels in the 5'AZA and 5'AZA/miR-133a treatment group compared to the untreated group and cells with void nanocarriers. These results suggest that the co-delivery of 5'AZA and miR-133a nanoformulation can induce the direct reprogramming of cardiac fibroblasts to cardiomyocyte-like cells in-vitro, in addition to demonstrating the influence of miR-133a and 5'AZA as epigenetic regulators in dictating cell fate.

Revisiting Non-Conventional Crystallinity-Induced Effects on Molecular Mobility in Sustainable Diblock Copolymers of Poly(propylene adipate) and Polylactide

This work deals with molecular mobility in renewable block copolymers based on polylactide (PLA) and poly(propylene adipate) (PPAd). In particular, we assess non-trivial effects on the mobility arising from the implementation of crystallization. Differential scanning calorimetry, polarized light microscopy and broadband dielectric spectroscopy were employed in combination for this study. The materials were subjected to various thermal treatments aiming at the manipulation of crystallization, namely, fast and slow cooling, isothermal melt- and cold-crystallization. Subsequently, we evaluated the changes recorded in the overall thermal behavior, semicrystalline morphology and molecular mobility (segmental and local). The molecular dynamics map for neat PPAd is presented here for the first time. Unexpectedly, the glass transition temperature, T_g, in the amorphous state drops upon crystallization by 8–50 K. The drop becomes stronger with the increase in the PPAd fraction. Compared to the amorphous state, crystallization leads to significantly faster segmental dynamics with severely suppressed cooperativity. For the PLA/PPAd copolymers, the effects are systematically stronger in the cold- as compared to the melt-crystallization, whereas the opposite happens for neat PLA. The local β_PLA relaxation of PLA was, interestingly, recorded to almost vanish upon crystallization. This suggests that the corresponding molecular groups (carbonyl) are strongly involved and immobilized within the semicrystalline regions. The overall results suggest the involvement of either spatial nanoconfinement imposed on the mobile chains within the inter-crystal amorphous areas and/or a crystallization-driven effect of nanophase separation. The latter phase separation seems to be at the origins of the significant discrepancy recorded between the calorimetric and dielectric recordings on T_g in the copolymers. Once again, compared to more conventional techniques such as calorimetry, dielectric spectroscopy was proved a powerful and quite sensitive tool in recording such effects as well as in providing indirect indications for the polymer chains’ topology.

Extraction of biodegradable microplastics from tissues of aquatic organisms

Biodegradable plastics (BPs) have been given high hopes to substitute conventional plastics, but their biodegradation requires strict conditions. BPs can accumulate for a long time in the environment and even derive biodegradable microplastics (BMPs), thus threatening wildlife and ecosystems. However, no efficient method is available for extracting BMPs from organisms' tissues. This study used multi-criteria decision-making (MCDM) methods to comprehensively evaluate and optimize extraction protocols of five BMPs from economic aquatic species. Digestion time, digestion efficiency, mass loss, cost, polymer integrity and size change were selected as evaluating indictors. According to the screening results of MCDM methods, Pepsin+H₂O₂ was selected as the optimal digestion method of BMPs because of its highest comprehensive score, which has high digestion efficiency (99.56%) and minimum plastic damage. Compared with olive oil, NaI is more suitable for separating BMPs from the digested residues. Furthermore, the combination of Pepsin+H₂O₂ digestion and NaI density separation was used to extract all five kinds of BMPs from the bivalve, crab, squid, and crayfish tissues, and all the recovery rates exceeded 80%. These results suggest that the optimal protocol is practicable to extract various BMPs from various aquatic organisms.

Dual-jet electrospun PDLGA/PCU nonwovens as promising mesh implant materials with controlled release of sirolimus and diclofenac

Dual-jet electrospinning was employed to produce two-component, partially degradable drug releasing nonwovens with interlacing of poly(D,L-lactide-co-glycolide) (PDLGA) and different poly(carbonate urethanes) (PCUs). Diclofenac sodium and sirolimus were released simultaneously from the copolyester carrier. The research focused on determining of release profiles of drugs, depending on the hydrophilicity of introduced PCU nanofibers. The influence of drugs incorporation on the hydrolytic degradation of the PDLGA and mechanical properties of nonwovens was also studied. Evaluation for interaction with cells in vitro was investigated on a fibroblast cell line in cytotoxicity and surface adhesion tests. Significant changes in drugs release rate, depending on the applied PCU were observed. It was also noticed, that hydrophilicity of drugs significantly influenced the hydrolytic degradation mechanism and surface erosion of the PDLGA, as well as the tensile strength of nonwovens. Tests carried out on cells in an in vitro experiment showed that introduction of sirolimus caused a slight reduction in the viability of fibroblasts as well as a strong limitation in their capability to colonize the surface of fibers. Due to improvement of mechanical strength and the ability to controlled drugs release, the obtained material may be considered as prospect surgical mesh implant in the treatment of hernia.

Polylactide Perspectives in Biomedicine: From Novel Synthesis to the Application Performance

The incessant developments in the pharmaceutical and biomedical fields, particularly, customised solutions for specific diseases with targeted therapeutic treatments, require the design of multicomponent materials with multifunctional capabilities. Biodegradable polymers offer a variety of tailored physicochemical properties minimising health adverse side effects at a low price and weight, which are ideal to design matrices for hybrid materials. PLAs emerge as an ideal candidate to develop novel materials as are endowed withcombined ambivalent performance parameters. The state-of-the-art of use of PLA-based materials aimed at pharmaceutical and biomedical applications is reviewed, with an emphasis on the correlation between the synthesis and the processing conditions that define the nanostructure generated, with the final performance studies typically conducted with either therapeutic agents by in vitro and/or in vivo experiments or biomedical devices.

Polyvinyl alcohol coating prevents platelet adsorption and improves mechanical property of polycaprolactone-based small-caliber vascular graft

The low patency of synthetic vascular grafts hinders their practical applicability. Polyvinyl alcohol (PVA) is a non-toxic, highly hydrophilic polymer; thus, we created a PVA-coated polycaprolactone (PCL) nanofiber vascular graft (PVA–PCL graft). In this study, we examine whether PVA could improve the hydrophilicity of PCL grafts and evaluate its in vivo performance using a rat aorta implantation model. A PCL graft with an inner diameter of 1 mm is created using electrospinning (control). The PCL nanofibers are coated with PVA, resulting in a PVA–PCL graft. Mechanical property tests demonstrate that the PVA coating significantly increases the stiffness and resilience of the PCL graft. The PVA–PCL surface exhibits a much smaller sessile drop contact angle when compared with that of the control, indicating that the PVA coating has hydrophilic properties. Additionally, the PVA–PCL graft shows significantly less platelet adsorption than the control. The proposed PVA–PCL graft is implanted into the rat’s abdominal aorta, and its in vivo performance is tested at 8 weeks. The patency rate is 83.3% (10/12). The histological analysis demonstrates autologous cell engraftment on and inside the scaffold, as well as CD31/α-smooth muscle positive neointima regeneration on the graft lumen. Thus, the PVA–PCL grafts exhibit biocompatibility in the rat model, which suggests that the PVA coating is a promising approach for functionalizing PCL.

Roles of interfacial water states on advanced biomedical material design

When biomedical materials come into contact with body fluids, the first reaction that occurs on the material surface is hydration; proteins are then adsorbed and denatured on the hydrated material surface. The amount and degree of denaturation of adsorbed proteins affect subsequent cell behavior, including cell adhesion, migration, proliferation, and differentiation. Biomolecules are important for understanding the interactions and biological reactions of biomedical materials to elucidate the role of hydration in biomedical materials and their interaction partners. Analysis of the water states of hydrated materials is complicated and remains controversial; however, knowledge about interfacial water is useful for the design and development of advanced biomaterials. Herein, we summarize recent findings on the hydration of synthetic polymers, supramolecular materials, inorganic materials, proteins, and lipid membranes. Furthermore, we present recent advances in our understanding of the classification of interfacial water and advanced polymer biomaterials, based on the intermediate water concept.

Adsorption characteristics of peptides on ω-functionalized self-assembled monolayers: a molecular dynamics study

Molecular dynamics simulations were employed to investigate the adsorption behavior of a variety of amino-acid side-chain analogs (SCAs) and a β-hairpin (HP7) peptide on a series of liquid-like self-assembled monolayers (SAMs) with terminal functional groups of -OH, -OCH₃, -CH₃, and -CF₃. The relationships between the adsorption free energy of the SCAs and the interfacial properties of water on the SAMs were examined to determine the acute predictors of protein adsorption on the SAM surfaces. The structural changes of HP7 on the SAM surfaces were also investigated to understand the relationship between the surface nature and protein denaturation. It was found that the adsorption free energy of the SCAs was linearly related to the surface hydrophobicity, which was computed as the free energy of cavity formation near the SAM-water interfaces. In addition, the hydrophobic -CH₃ and -CF₃ SAMs produced substantial conformational changes in HP7 because of the strong hydrophobic attractions to the nonpolar side chains. The hydrophilic surface terminated by -OH also promoted structural changes in HP7 resulting from the formation of hydrogen bonds between the hydrophilic tail and HP7. Consequently, the moderate amphiphilic surface terminated by -OCH₃ avoided the denaturation of HP7 most efficiently, thus improving the biocompatibility of the surface. In conclusion, these results provide a deep understanding of protein adsorption for a wide range of polymeric surfaces, and they can potentially aid the design of appropriate biocompatible coatings for medical applications.

Zwitterionic Conducting Polymers: From Molecular Design, Surface Modification, and Interfacial Phenomenon to Biomedical Applications

Conducting polymers (CPs) have gained attention as electrode materials in bioengineering mainly because of their mechanical softness compared to conventional inorganic materials. To achieve better performance and broaden bioelectronics applications, the surface modification of soft zwitterionic polymers with antifouling properties represents a facile approach to preventing unwanted nonspecific protein adsorption and improving biocompatibility. This feature article emphasizes the antifouling properties of zwitterionic CPs, accompanied by their molecular synthesis and surface modification methods and an analysis of the interfacial phenomenon. Herein, commonly used methods for zwitterionic functionalization on CPs are introduced, including the synthesis of zwitterionic moieties on CP molecules and postsurface modification, such as the grafting of zwitterionic polymer brushes. To analyze the chain conformation, the structure of bound water in the vicinity of zwitterionic CPs and biomolecule behavior, such as protein adsorption or cell adhesion, provide critical insights into the antifouling properties. Integrating these characterization techniques offers general guidelines and paves the way for designing new zwitterionic CPs for advanced biomedical applications. Recent advances in newly designed zwitterionic CP-based electrodes have demonstrated outstanding potential in modern biomedical applications.

Direct and indirect effects on molecular mobility in renewable polylactide-poly(propylene adipate) block copolymers as studied via dielectric spectroscopy and calorimetry

In this work, we study a series of sustainable block copolymers based on polylactide, PLA, and poly(propylene adipate), PPAd, both polymers being prepared from renewable resources. Envisaging a wide range of future applications in the frame of a green and circular economy, e.g., packaging materials replacing conventional petrochemicals, the employment of PPAd aims at lowering the glass transition and melting temperatures of PLA and, finally, facilitation of the enzymatic degradation and compostability. The copolymers have been synthesized via ring opening polymerization of lactides in the presence of propylene adipate oligomers (5, 15 and 25%). The direct effects on the molecular mobility by the structure/composition are assessed in the amorphous state employing broadband dielectric spectroscopy (BDS) and calorimetry. BDS allowed the recording of local PLA and PPAd dynamics in all cases. The effects on local relaxations suggest favoring of interchain interactions, both PLA-PPAd and PPAd-PPAd. Regarding the more important segmental dynamics, the presence of PPAd leads to faster polymer chain diffusion, as monitored by the significant lowering of the dielectric and calorimetric glass transition temperature, T_g. This suggests the plasticizing role of PPAd on PLA (majority) in combination with the lowering of the average molar mass, M_n, in the copolymers from ∼75 to ∼30 kg mol^-1, which is the actual scope for the synthesis of these materials. Interestingly, a strong suppression in fragility (chain cooperativity) is additionally recorded. In contrast to calorimetry and due to the high resolving power of BDS, for the higher PPAd fraction, the weak segmental relaxation of PPAd was additionally recorded. Overall, the recordings suggest a strong increase in free volume and two individual dynamic states, one for 0 and 5% PPAd and another for 15 and 25% PPAd. Within the latter, we gained indications for partial phase nano-separation of PPAd. Regarding indirect effects, these were followed via crystallization. Independent of the method of crystallization, namely, melt or cold, the presence of PPAd led to the systematic lowering of crystallization and melting temperatures and enthalpies. The effects reflect the decrease of crystalline nuclei, which is confirmed by optical microscopy as in the copolymers fewer although larger crystals are formed.

Hydration Mechanism in Blood-Compatible Polymers Undergoing Phase Separation

Interactions involving intermediate water are crucial for the design of novel blood-compatible materials. Herein, we use a combination of atomic force microscopy, quartz crystal microbalance measurements, and soft X-ray emission spectroscopy to investigate the local hydrogen-bonded configuration of water on blood-compatible poly(2-methoxyethyl acrylate) and non-blood-compatible poly(n-butyl acrylate) grafted on a gold substrate. We find that the initially incorporated water induces polymer-dependent phase separation, facilitating further water uptake. For the blood-compatible polymer, tetrahedrally coordinated water coexists with water adsorbed on C═O groups in low-density regions of the grafted polymer surface, providing a scaffold for the formation of intermediate water. The amount of intermediate water is determined by the type of functional groups, local polymer configuration, and polymer morphology. Thus, blood compatibility is governed by the complex water/polymer interactions.

Polydimethylsiloxane Composites Characterization and Its Applications: A Review

Polydimethylsiloxane (PDMS) is one of the most promising elastomers due its remarkable proprieties such as good thermal stability, biocompatibility, corrosion resistance, flexibility, low cost, ease of use, chemically inertia, hyperplastic characteristics, and gas permeability. Thus, it can be used in areas such as microfluidic systems, biomedical devices, electronic components, membranes for filtering and pervaporation, sensors, and coatings. Although pure PDMS has low mechanical properties, such as low modulus of elasticity and strength, it can be improved by mixing the PDMS with other polymers and by adding particles or reinforcements. Fiber-reinforced PDMS has proved to be a good alternative to manufacturing flexible displays, batteries, wearable devices, tactile sensors, and energy harvesting systems. PDMS and particulates are often used in the separation of liquids from wastewater by means of porosity followed by hydrophobicity. Waxes such as beeswax and paraffin have proved to be materials capable of improving properties such as the hydrophobic, corrosion-resistant, thermal, and optical properties of PDMS. Finally, when blended with polymers such as poly (vinyl chloride-co-vinyl acetate), PDMS becomes a highly efficient alternative for membrane separation applications. However, to the best of our knowledge there are few works dedicated to the review and comparison of different PDMS composites. Hence, this review will be focused on PDMS composites, their respective applications, and properties. Generally, the combination of elastomer with fibers, particles, waxes, polymers, and others it will be discussed, with the aim of producing a review that demonstrates the wide applications of this material and how tailored characteristics can be reached for custom applications.

Synthesis and Antiplatelet Adhesion Behavior of a Poly(L-lactide-co-glycolide)-Poly(1,5-dioxepan-2-one) Multiblock Copolymer

Platelet adhesion and denaturation on artificial medical implants induce thrombus formation. In this study, bioabsorbable copolymers composed of poly(l-lactide-co-glycolide) (PLGA) and poly(1,5-dioxepan-2-one) (PDXO) were synthesized and evaluated for their antiplatelet adhesive properties. The PLGA-PXO multiblock copolymer (PLGA-PDXO MBC) and its random copolymer (PLGA-PDXO RC) showed effective antiplatelet adhesive properties, and the number of adhered platelets was similar to those adhered on poly(2-methoxyethylacrylate), a known antiplatelet adhesive polymer, although a large number of denatured platelets were observed on a PLGA-poly(ε-caprolactone) multiblock copolymer (PLGA-PCL MBC). Using monoclonal antifibrinogen IgG antibodies, we also found that both αC and γ-chains, the binding sites of fibrinogen for platelets, were less exposed on the PLGA-PDXO MBC surface compared to PLGA-PCL MBC. Furthermore, free-standing films of PLGA-PDXO MBC were prepared by casting the polymer solution on glass plates and showed good tensile properties and slow hydrolytic degradation in phosphate-buffered saline (pH = 7.4). We expect that the unique properties of PLGA-PDXO MBC, i.e., antiplatelet adhesive behavior, good tensile strength, and hydrolytic degradation, will pave the way for the development of new bioabsorbable implanting materials suitable for application at blood-contacting sites.

Biosafety of a novel covered self-expandable metal stent coated with poly(2-methoxyethyl acrylate) in vivo

Covered self-expandable metal stents (CSEMS) are often used for palliative endoscopic biliary drainage; however, the unobstructed period is limited because of sludge occlusion. The present study aimed to evaluate the biosafety of a novel poly(2-methoxyethyl acrylate)-coated CSEMS (PMEA-CSEMS) for sludge resistance and examine its biosafety in vivo. Using endoscopic retrograde cholangiopancreatography, we placed the PMEA-CSEMS into six normal porcine bile ducts and conventional CSEMS into three normal porcine bile ducts. We performed serological examination and undecalcified histological analysis at 1, 3, and 6 months during follow-up. In the bile ducts with PMEA-CSEMS or conventional CSEMS, we observed no increase in liver enzyme or inflammatory marker levels in the serological investigations and mild fibrosis but no inflammatory response in the histopathological analyses. Thus, we demonstrated the biosafety of PMEA-CSEMS in vivo.

Interactions between Acrylate/Methacrylate Biomaterials and Organic Foulants Evaluated by Molecular Dynamics Simulations of Simplified Binary Mixtures

Improving hydrophilicity is a key factor for enhancing the biocompatibility of polymer surfaces. Nevertheless, previous studies have reported that poly(2-methoxyethyl acrylate) (PMEA) surfaces demonstrate markedly better biocompatibility than more hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA) surfaces. In this work, the origins of the excellent biocompatibility of the PMEA surface are investigated using molecular dynamics (MD) simulations of simplified binary mixtures of acrylate/methacrylate trimers and organic solvents, with n-nonane, 1,5-pentanediol, or 1-octanol serving as the probe organic foulants. The interactions between the acrylate/methacrylate trimers and solvent molecules were evaluated by calculating the radial distribution function (RDF), with the resulting curves indicating that the 2-methoxyethyl acrylate (MEA) trimer has a lower affinity for n-nonane molecules than the 2-hydroxyethyl methacrylate (HEMA) trimer. This result agrees with the experimental consensus that the biocompatibility of PMEA surfaces is better than that of PHEMA surfaces, supporting the hypothesis that the affinity between an acrylate/methacrylate trimer and a foulant molecule in a simplified binary mixture is a significant factor in determining a surface's antifouling properties. The RDF curves obtained for the other two solvent systems exhibited behavior that further highlighted the advantages of the PMEA surfaces as biocompatible polymers. In addition, the validity of employing the second virial coefficient (B₂) as a predictor of antifouling properties was explored. The order of the B₂ values of different binary mixtures indicated that the MEA trimers have the lowest affinities with n-nonane molecules, which confirms that although PMEA is more hydrophobic than PHEMA, it exhibits better biocompatibility. This analysis demonstrates that the MEA's weaker miscibility with nonpolar foulants contributes to the excellent biocompatibility of PMEA. Thus, B₂ is a promising criterion for assessing the miscibility between acrylate/methacrylate materials and nonpolar organic foulants, which indicates the potential for predicting the antifouling properties of acrylate/methacrylate polymer materials by evaluating the value of B₂.

Effect of Branching Degree of Dendritic Polyglycerols on Plasma Protein Adsorption: Relationship between Hydration States and Surface Morphology

This study focuses on dendritic glycerols and investigates the construction of biocompatible surfaces by understanding how differences in the branching of these molecules change the interactions with the biological components. The two molecules, polyglycerol dendrimer (PGD), which has a completely branched structure, and hyperbranched polyglycerol (HPG), which has an incompletely branched structure, are compared and the differences in branching are evaluated. It is shown that PGD has a little bit more intermediate water than HPG, which reflects the differences in the branching. The effect of surface state on the adsorption of the plasma proteins, human serum albumin (HSA), fibrinogen (Fib), and fibronectin (FN), is discussed by modifying a glass surface using these molecules with different hydration states. The adsorption of HSA decreases to several percent for HPG and 10% for PGD compared to unmodified substrate. Although the adsorption of Fib decreases to 5% for HPG, an increase to 150% is observed for PGD. Since this specific Fib adsorption observed only onto PGD is suppressed in the cases of a mixed solution of HSA and Fib or sequentially using HSA solution and then Fib solution, it is thought that the Vroman effect is suppressed on the PGD-modified surface. Furthermore, when AFM measurements are performed in PBS to understand the surface roughness, PGD is found to be more highly non-uniform. Because of this, the nanometer scale roughness that is significantly observed only on the PGD-modified surface is thought to have an effect on the characteristic adsorption properties of Fib. Thus, although both PGD and HPG with different branching have intermediate water, the proportion differs between PGD and HPG. Therefore, it is found that differences occur in the plasma protein adsorption mechanisms depending on the coordinates and density of hydroxyl groups within the molecules.

First Observation of the Hydration Layer around Polymer Chain by Scattering and Its Relationship to Thromboresistance: Dilute Solution Properties of PMEA in THF/Water

Poly(2-methoxyethyl acrylate) (PMEA) is known to exhibit excellent thromboresistance, i.e., hardly causing blood-clot formation on its surface. Hence, PMEA and its analogues have been commercially used for blood-contacting materials in medical devices. In this study, we investigated the conformation and solvation state of PMEA in mixtures of tetrahydrofuran (THF) and water with various water volume fractions (ϕ_water) by viscosity, sedimentation equilibrium, small-angle X-ray scattering (SAXS), and dielectric relaxation measurements. We also comparatively investigated those of poly[2-(2-methoxyethoxy)ethyl methacrylate] (PMe2MA) and polystyrene (PS). For all of these, THF is a good solvent and water is a nonsolvent or poor solvent. PMe2MA and PMEA show equally good thromboresistance, while PS does not at all. The solution properties of PMe2MA and PMEA were found to be quite different from PS. There are clear attractive interactions (or correlation) between the PMEA chain (or PMe2MA) and the waters in the vicinity of the chain despite their water insolubility. These correlated waters give additional scattering and the angular dependence of SAXS was analyzed in terms of the hydration layer model that has been used in protein solution scattering. The hydration is related to increasing both the chain stiffness and excluded volume. These distinctive properties are likely related to the origin of its good thromboresistance.

Synthesis of ZnO sol-gel thin-films CMOS-Compatible

Zinc oxide (ZnO) is a II–VI group semiconductor with a wide direct bandgap and is an important material for various fields of industry and high-technological applications. The effects of thickness, annealing process in N₂ and air, optical properties, and morphology of ZnO thin-films are studied. A low-cost sol–gel spin-coating technique is used in this study for the simple synthesis of eco-friendly ZnO multilayer films deposited on (100)-oriented silicon substrates ranging from 150 to 600 nm by adjusting the spin coating rate. The ZnO sol–gel thin-films using precursor solutions of molarity 0.75 M exhibit an average optical transparency above 98%, with an optical band gap energy of 3.42 eV. The c-axis (002) orientation of the ZnO thin-films annealed at 400 °C were mainly influenced by the thickness of the multilayer, which is of interest for piezoelectric applications. These results demonstrate that a low-temperature method can be used to produce an eco-friendly, cost-effective ZnO sol–gel that is compatible with a complementary metal-oxide-semiconductor (CMOS) and integrated-circuits (IC).

A low-cost sol–gel spin-coating technique is used in this study for the simple synthesis of eco-friendly ZnO multilayer films deposited on (100)-oriented silicon substrates ranging from 150 to 600 nm by adjusting the spin coating rate.

Effects of Side-Chain Spacing and Length on Hydration States of Poly(2-methoxyethyl acrylate) Analogues: A Molecular Dynamics Study

Hydration states of polymers are known to directly influence the adsorption of biomolecules. Particularly, intermediate water (IW) has been found able to prevent protein adsorption. Experimental studies have examined the IW content and nonthrombogenicity of poly(2-methoxyethyl acrylate) analogues with different side-chain spacings and lengths, which are HPx (x is the number of backbone carbons in a monomer) and PMCyA (y is the number of carbons in-between ester and ether oxygens of the side-chain) series, respectively. HPx was reported to possess more IW content but lower nonthrombogenicity compared to PMCyA with analogous composition. To understand the reason for the conflict, molecular dynamics simulations were conducted to elucidate the difference in the properties between the HPx and PMCyA. Simulation results showed that the presence of more methylene groups in the side chain more effectively prohibits water penetration in the polymer than those in the polymer backbone, causing a lower IW content in the PMCyA. At a high water content, the methoxy oxygen in the shorter side chain of the HPx cannot effectively bind water compared to that in the PMCyA side chain. HPx side chains may have more room to contact with molecules other than water (e.g., proteins), causing experimentally less nonthrombogenicity of HPx than that of PMCyA. In summary, theoretical simulations successfully explained the difference in the effects of side-chain spacing and length in atomistic scale.

Poly(tertiary amide acrylate) Copolymers Inspired by Poly(2-oxazoline)s: Their Blood Compatibility and Hydration States

Modifying the side chain of poly(meth)acrylate with moieties originating from biocompatible polymers can be an effective method for developing novel blood-compatible polymers. Inspired by biocompatible poly(2-methyl-2-oxazoline) (PMeOx) and poly(2-ethyl-2-oxazoline) (PEtOx), four water-soluble poly(tertiary amide acylate) analogues bearing a pendant tertiary amide were synthesized. The results of hemolysis and cell viability tests showed that all the poly(tertiary amide acylate) analogues were compatible with red blood cells, HeLa cells, and normal human dermal fibroblasts as PMeOx or PEtOx. Among the four poly(tertiary amide acylate) analogues, poly[2-(N-methylpropionamido)ethyl acrylate] (PPEA) and poly[2-(N-ethylacetamido)ethyl acrylate] (PEAE) showed thermosensitivity in aqueous solution; especially, PPEA (10 mg mL^-1) exhibited a lower critical solution temperature of 37 °C. Water-insoluble copolymers were prepared to investigate the possibility of applying these synthesized polymers as blood-compatible coatings. The poly[n-butyl methacrylate₇₀-co-2-(N-methylacetamido)ethyl methacrylate₃₀] (coPAEM) coatings significantly suppressed plasma protein adsorption, denaturation degree of adsorbed fibrinogen, and platelet adhesion. Intermediate water (IW), whose content can generally indicate the blood compatibility of polymers, was found in all hydrated homopolymers and copolymers by differential scanning calorimetry. The present work demonstrated that the tertiary amide moiety in the side chain of poly(meth)acrylate was an effective contributor to blood compatibility and IW.