A novel polymer-based nitrocellulose platform for implementing a multiplexed microfluidic paper-based enzyme-linked immunosorbent assay

Ratiometric fluorescence sensor based on deep learning for rapid and user-friendly detection of tetracycline antibiotics

The detection of tetracycline antibiotics (TCs) in food holds great significance in minimizing their absorption within the human body. Hence, this study aims to develop a rapid, convenient, real-time, and accurate detection method for detecting antibiotics in an authentic market setting. A colorimetric fluorescence sensor was devised for tetracycline detection utilizing PVA aerogels as the substrate. Its operating principle is based on the IFE effect and antenna effect. A detection device is designed to capture fluorescence images while deep learning was employed to aid in the detection process. The sensor exhibits high responsiveness with a mere 60-s requirement for detection and demonstrates substantial color changes(blue to red), achieving 99% accuracy within the range of 10-100 μM with the assistance of deep learning (Resnet18). Real sample simulation tests yielded recovery rates between 95% and 130%. Overall, the proposed strategy proved to be a simple, portable, reliable, and responsive solution for rapid real-time TCs detection in food samples.

Upconversion Nanoparticle-Based Dot-Blot Immunoassay for Quantitative Biomarker Detection

Dot-blot immunoassays are widely used for the user-friendly detection of clinical biomarkers. However, the majority of dot-blot assays have only limited sensitivity and are only used for qualitative or semiquantitative analysis. To overcome this limitation, we have employed labels based on photon-upconversion nanoparticles (UCNPs) that exhibit anti-Stokes luminescence and can be detected without optical background interference. First, the dot-blot immunoassay on a nitrocellulose membrane was optimized for the quantitative analysis of human serum albumin (HSA), resulting in a limit of detection (LOD) of 0.19 ng/mL and a signal-to-background ratio (S/B) of 722. Commercial quantum dots were used as a reference label, reaching the LOD of 4.32 ng/mL and the S/B of 3, clearly indicating the advantages of UCNPs. In addition, the potential of UCNP-based dot-blot for real sample analysis was confirmed by analyzing spiked urine samples, reaching the LOD of 0.24 ng/mL and recovery rates from 79 to 123%. Furthermore, we demonstrated the versatility and robustness of the assay by adapting it to the detection of two other clinically relevant biomarkers, prostate-specific antigen (PSA) and cardiac troponin (cTn), reaching the LODs in spiked serum of 9.4 pg/mL and 0.62 ng/mL for PSA and cTn, respectively. Finally, clinical samples of patients examined for prostate cancer were analyzed, achieving a strong correlation with the reference electrochemiluminescence immunoassay (recovery rates from 89 to 117%). The achieved results demonstrate that UCNPs are highly sensitive labels that enable the development of dot-blot immunoassays for quantitative analysis of low-abundance biomarkers.

Sustainable Sensing with Paper Microfluidics: Applications in Health, Environment, and Food Safety

This manuscript offers a concise overview of paper microfluidics, emphasizing its sustainable sensing applications in healthcare, environmental monitoring, and food safety. Researchers have developed innovative sensing platforms for detecting pathogens, pollutants, and contaminants by leveraging the paper's unique properties, such as biodegradability and affordability. These portable, low-cost sensors facilitate rapid diagnostics and on-site analysis, making them invaluable tools for resource-limited settings. This review discusses the fabrication techniques, principles, and applications of paper microfluidics, showcasing its potential to address pressing challenges and enhance human health and environmental sustainability.

Advances in Microfluidic Paper-Based Analytical Devices (µPADs): Design, Fabrication, and Applications

Microfluidic Paper-based Analytical Devices (µPADs) have emerged as a new class of microfluidic systems, offering numerous advantages over traditional microfluidic chips. These advantages include simplicity, cost-effectiveness, stability, storability, disposability, and portability. As a result, various designs for different types of assays are developed and investigated. In recent years, µPADs are combined with conventional detection methods to enable rapid on-site detection, providing results comparable to expensive and sophisticated large-scale testing methods that require more time and skilled personnel. The application of µPAD techniques is extensive in environmental quality control/analysis, clinical diagnosis, and food safety testing, paving the way for on-site real-time diagnosis as a promising future development. This review focuses on the recent research advancements in the design, fabrication, material selection, and detection methods of µPADs. It provides a comprehensive understanding of their principles of operation, applications, and future development prospects.

Lateral flow assemblies and allied application of carbon quantum dots derived from cigarette tobacco in biosensing, anticounterfeiting and fluorescent films: Theoretical and experimental overview

The bio-sensing activity of fluorescence based nanoprobes is one of the most significant aspects to scrutinize the analytical pursuance in modern security and lateral flow assays. Herein, potent transmogrification of waste cigarette tobacco into fluorescent carbon quantum dots (CQDs) has been achieved by calcination approach. The waste transformation to CQDs holds diverse benefits, comprising high quantum yield, low toxicity and scale up synthesis. The developed CQDs were able to identify tetracycline with phenomenal selectivity and sensitivity through fluorescence based method. The sensing mechanism was fully explored using Density Functional Theory (DFT) and Molecular docking studies. Governing features comprising tetracycline concentration, interfering studies, and real water analysis on the identification of tetracycline were also investigated. Along with, the prepared CQDs act as colorimetric probe, facilitating the detection of tetracycline with the naked eye. The lateral flow device was constructed for the on-site detection of tetracycline in real water samples. To the best of our knowledge, the present work represents a novel approach to designing CQDs and demonstrates their significant potential for application in anticounterfeiting measures and lateral flow devices. This work holds significant prospective as the prepared CQDs was fully utilized to its maximum usage in developing films and fluorescent anti-counterfeiting applications. Concisely, current work opens up distinctive opportunities for rapid on-site, real-time and visualized surveillance of tetracycline using CQDs prepared with a quite simple green approach.

A portable microfluidic photometric detection method based on enzyme linked immunoscatter enhancement

Currently, the combination of smart phones and microfluidic chips is a commonly used device for point-of-care testing (POCT) detection. Enzyme linked immunosorbent assay (ELISA) is an effective way to detect specific proteins in disease. Because the detection accuracy of smartphone cameras is difficult to directly replace high-precision spectral devices, the combination of smartphones and ELISA has not been widely used. Therefore, this paper proposes a microfluidic photometric detection method based on ELISA scattering enhancement. Firstly, the scattering characteristics of IMB are mined, and the optimal value of absorbance error compensation parameter is obtained. Secondly, the absorbance error compensation model based on scattering enhancement characteristics is established to improve the image acquisition accuracy of smart phones. Finally, the microfluidic photometric detection chip is developed, and the optical path system, optical path adjustment system and POCT detection App of smart phone are designed. The optimal compensation parameters of IMB were obtained based on simulated samples, and the linearity of absorbance and concentration increased by 22.6% after compensation. In the IL-6 sample experiment, the detection results of the platform in this paper had a good linear correlation with IL-6 sample concentration, and the linear correlation coefficient was above 0.95459. At the same time, the detection limit and accuracy meet the detection requirements. Therefore, with the participation of smart phones and microfluidic chips, problems such as difficult carrying and complex operation in traditional ELISA daily detection have been solved, laying a foundation for the future promotion and application of ELISA based POCT platform.

A novel approach to low-cost, rapid and simultaneous colorimetric detection of multiple analytes using 3D printed microfluidic channels

This research paper presents an inventive technique to swiftly create microfluidic channels on distinct membrane papers, enabling colorimetric drug detection. Using a modified DIY RepRap 3D printer with a syringe pump, microfluidic channels (µPADs) are crafted on a flexible nylon-based substrate. This allows simultaneous detection of four common drugs with a single reagent. An optimized blend of polydimethylsiloxane (PDMS) dissolved in hexane is used to create hydrophobic channels on various filter papers. The PDMS-hexane mixture infiltrates the paper's pores, forming hydrophobic barriers that confine liquids within the channels. These barriers are cured on the printer's hot plate, controlling channel width and preventing spreading. Capillary action drives fluid along these paths without spreading. This novel approach provides a versatile solution for rapid microfluidic channel creation on membrane papers. The DIY RepRap 3D printer integration offers precise control and faster curing. The PDMS-hexane solution accurately forms hydrophobic barriers, containing liquids within desired channels. The resulting microfluidic system holds potential for portable, cost-effective drug detection and various sensing applications.

Disposable Device for Bacterial Vaginosis Detection

Due to the increasing demand for clinical testing of infectious diseases at the point-of-care, the global market claims alternatives for rapid diagnosis tools such as disposable biosensors, avoiding the need for specialized laboratories and skilled personnel. Bacterial vaginosis (BV) is an infectious disease that commonly affects reproductive-age women and predisposes the infection of sexually transmitted diseases. Especially in asymptomatic cases, BV can lead to pelvic inflammatory conditions, postpartum endometritis, and preterm labor. Conventionally, BV diagnosis involves the microscopic analysis of vaginal swab samples; it thus requires highly trained personnel. In response, we report a novel microfluidic paper-based analytical device for BV diagnosis. Sialidase, a biomarker overexpressed in BV, was detected by exploiting an immunosensing mechanism previously discovered by our team. This technology employs a graphene oxide-coated surface as a quencher of fluorescence; the fluorescence of the immunoprobes that do not experiment immunoreactions (antibody-antigen) are deactivated by graphene oxide via non-radiative energy transfer, whereas those immunoprobes undergoing immunoreactions preserve their photoluminescence due to the distance and the low affinity between the immunocomplex and the graphene oxide-coated surface. Our paper-based test was typically carried out within 20 min, and the sample volume was 6 μL. Besides, it was tested with 14 vaginal swabs specimens to discriminate clinical samples of women with normal microbiota from those with BV. Our disposable device represents a new tool to prevent the consequences of BV.

Slide-type waveflex biosensor based on signal enhancement technology for alpha-fetoprotein detection

The development of signal enhancement technology in optical fiber biosensors is beneficial for the accurate measurement of low-concentration samples. Here, a localized surface plasmon resonance (LSPR)-based fiber biosensor combining a slide-type fiber structure (thus named WaveFlex Biosensor) and low-dimensional materials is proposed for alpha-fetoprotein (AFP) detection. A symmetric transverse offset splicing technology was used to fabricate the multi-mode fiber (MMF-multi-core fiber (MCF)-MMF structure. Furthermore, the MMF on one side was prepared into an S-taper, forming a slide-type fiber structure to generate more energy leakage. The LSPR signal generated by gold nanoparticles (AuNPs) was enhanced by the CeO2 NPs and C3N quantum dots functionalized on the fiber probe. The excellent performance of NPs was conducive to improving the sensitivity of the WaveFlex biosensor and enabling the rapid detection of samples. An AFP antibody was used to identify AFP micro-biomolecules in a specific manner. Based on the combination of the above two methods, the developed fiber probe was applied to detect AFP, and the sensitivity and limit of detection were 32 pm/(ng/mL) and 6.65 ng/mL, respectively. The experimental results demonstrate that the signal-enhanced AFP WaveFlex biosensor has great potential for the rapid and accurate detection of AFP.

A nitrocellulose/cotton fiber hybrid composite membrane for paper-based biosensor

Nitrocellulose (NC) membrane was fabricated and tested for its potential use in various paper-based biosensors for use in point-of-care testing. However, contemporary technologies are complex, expensive, non-scalable, limited by conditions, and beset with potentially adverse effects on the environment. Herein, we proposed a simple, cost-effective, scalable technology to prepare nitrocellulose/cotton fiber (NC/CF) composite membranes. The NC/CF composite membranes with a diameter of 20 cm were fabricated in 15 min using papermaking technology, which contributes to scalability in the large-scale production of these composites. Compared with existing commercial NC membranes, the NC/CF composite membrane is characterized by small pore size (3.59 ± 0.19 μm), low flow rate (156 ± 55 s/40 mm), high dry strength (up to 4.04 MPa), and wet strength (up to 0.13 MPa), adjustable hydrophilic-hydrophobic (contact angles ranged from 29 ± 4.6 to 82.8 ± 2.4°), the good adsorption capacity of protein (up to 91.92 ± 0.07 μg). After lateral flow assays (LFAs) detection, the limit of detection is 1 nM, which is similar to commercial NC membrane (Sartorius CN 140). We envision the NC/CF composite membrane as a promising material for paper-based biosensors of point-of-care testing applications.

An electrochemiluminescence resonance energy transfer biosensor based on Luminol-LDH and CuS@Pt for detection of alpha-fetoprotein

Alpha-fetoprotein (AFP) is the best diagnostic marker for hepatocellular carcinoma (HCC) and plays an important role in the general surveillance of the population. Therefore, the establishment of an ultra-sensitive AFP assay is essential for the early screening and clinical diagnosis of HCC. In this work, we designed a signal-off biosensor for ultra-sensitive detection of AFP based on an electrochemiluminescent resonance energy transfer (ECL-RET) strategy using luminol intercalated layered bimetallic hydroxide (Luminol-LDH) as an ECL donor and Pt nanoparticles-grown on copper sulfide nanospheres (CuS@Pt) as ECL acceptor. The (Au NPs/Luminol-LDH)_n multilayer nanomembrane synthesized by our intercalation and layer-by-layer electrostatic assembly process not only effectively immobilizes luminol but also significantly enhances the ECL signal. The CuS@Pt composite has well visible light absorption ability and can burst the light emitted from luminol by ECL-RET. The biosensor showed good linearity in the range from 10^-5 ng mL^-1 to 100 ng mL^-1 and a minimum detection limit of 2.6 fg mL^-1. Therefore, the biosensor provides a novel and efficient strategy for the detection of AFP, which is important for the early screening and clinical diagnosis of HCC.

Alternative platform for COVID-19 diagnosis based on AuNP-modified lab-on-paper

COVID-19 has caused global health problems, and so rapid diagnosis is crucial to slow spread of the disease. Herein, a novel lab-on-paper screening method for SARS-CoV-2 Omicron BA.2 variant was developed using a gold nanoparticle-based colorimetric biosensor along with sensitive detection of SARS-CoV-2 antigen using laser desorption ionization-mass spectrometry (LDI-MS). As a result of antigen-antibody interaction, in the presence of SARS-CoV-2 antigen the gold nanoparticles undergo aggregation and change color from red to light purple, allowing for rapid determination of SARS-CoV-2 antigen with the naked eye. Furthermore, the lab-on-paper method can be directly applied as a substrate for sensitive quantitation of SARS-CoV-2 antigen in saliva using LDI-MS without the use of a conventional organic matrix and sample preparation. LDI-MS offers early diagnosis with high sensitivity, rapidity without sample preparation and lower cost per test compared with reverse transcriptase-PCR, which is crucial for preventing mortality in patients with underlying conditions. This method showed linearity over 0.01-1 μg mL^-1 covering the cut-off value of 0.048 μg mL^-1 for COVID-19 detection in human saliva. Moreover, a colorimetric sensor for urea was also fabricated in-parallel, for prediction of COVID-19 severity in patients with chronic kidney disease. The color change upon increasing urea concentration directly reflected kidney damage, which is related to increasing risk of mortality among patients with COVID-19. Hence, this platform might be a potential device for non-invasive diagnosis of SARS-CoV-2 Omicron BA.2 variant, which is the variant of most concern because it is transmitted more rapidly than the original SARS-CoV-2 virus and the Delta variant.

Paper-based multiplex biosensors for inexpensive healthcare diagnostics: a comprehensive review

Multiplex detection is a smart and an emerging approach in point-of-care testing as it reduces analysis time and testing cost by detecting multiple analytes or biomarkers simultaneously which are crucial for disease detection at an early stage. Application of inexpensive substrate such as paper has immense potential and matter of research interest in the area of point of care testing for multiplexed analysis as it possesses several unique advantages. This study presents the use of paper, strategies adopted to refine the design created on paper and lateral flow strips to enhance the signal, increase the sensitivity and specificity of multiplexed biosensors. An overview of different multiplexed detection studies performed using biological samples has also been reviewed along with the challenges and advantages offered by multiplexed analysis.

Point-of-care diagnostics for sepsis using clinical biomarkers and microfluidic technology

Sepsis is a life-threatening immune response which is caused by a wide variety of sources and is a leading cause of mortality globally. Rapid diagnosis and appropriate antibiotic treatment are critical for successful patient outcomes; however, current molecular diagnostic techniques are time-consuming, costly and require trained personnel. Additionally, there is a lack of rapid point-of-care (POC) devices available for sepsis detection despite the urgent requirements in emergency departments and low-resource areas. Recent advances have been made toward developing a POC test for early sepsis detection that will be more rapid and accurate compared to conventional techniques. Within this context, this review discusses the use of current and novel biomarkers for early sepsis diagnosis using microfluidics devices for POC testing.

Development of a New Lab-on-Paper Microfluidics Platform Using Bi-Material Cantilever Actuators for ELISA on Paper

In this paper, we present a novel and cost-effective lab-on-paper microfluidics platform for performing ELISA autonomously, with no user intervention beyond adding the sample. The platform utilizes two Bi-Material Cantilever Valves placed in a specially designed housing. The integration of these valves in a specific channel network forms a complete fluidic logic circuit for performing ELISA on paper. The housing also incorporates an innovative reagent storage and release mechanism that minimizes variability in the volume of reagents released into the reagent pads. The platform design was optimized to minimize variance in the time of fluid wicking from the reagent pad, using a randomized design of experiment. The platform adheres to the World Health Organization's ASSURED principles. The optimized design was used to conduct an ELISA for detecting rabbit immunoglobulin G (IgG) in a buffer, with a limit of detection of 2.27 ng/mL and a limit of quantification of 8.33 ng/mL. This represents a 58% improvement over previous ELISA methods for detecting rabbit IgG in buffer using portable microfluidic technology.

Threaded 3D microfluidic paper analytical device-based ratiometric fluorescent sensor for background-free and visual detection of organophosphorus pesticides

With the increasing concerns of food safety and environmental protection, it is desirable to develop reliable, effective, and portable sensors for detection of organophosphorus pesticides (OPs). Here, a cascade reaction system integrated with threaded 3D microfluidic paper analytical device (3D μPAD) was firstly developed for background-free and visual detection of OPs in agricultural samples. Butyrylcholinesterase (BChE) hydrolyzed acetylcholine into thiocholine (TCh), which reduced MnO₂ nanosheets into Mn²⁺. With addition of OPs, BChE activity was irreversibly inhibited, and the generation of TCh and the reduction of MnO₂ nanosheets were prevented. Then the remaining MnO₂ nanosheets oxidized o-phenylenediamine into 2,3-diaminophenazine with yellow-emission fluorescence, which quenched the fluorescence intensity of red-emission carbon dots (RCDs) via inner-filter effect. Based on above mechanism, a ratiometric fluorescent system was established for OPs detection. Threaded 3D μPAD consisted of 4 layers, which allowed to load and/or add reagents to trigger the cascade reaction system for OPs detection. The fluorescent images presented distinguishable color variations from red to yellow with dichlorvos concentrations ranging from 2.5 to 120 μg L^-1, and the limit of detection was 1.0 μg L^-1. In the practical samples testing, threaded 3D μPAD can eliminate background influence on fluorescent signal for OPs detection. Threaded 3D μPAD integrated with ratiometric sensing platform has merits of accuracy response, facile operation, and background-free detection, which supplies a new alternative approach for on-site pesticide detection.

Optimization of a silver-nanoprism conjugated with 3,3',5,5'-tetramethylbenzidine towards easy-to-make colorimetric analysis of acetaldehyde: a new platform towards rapid analysis of carcinogenic agents and environmental technology

Acetaldehyde acts as an important mediator in the metabolism of plants and animals; however, its abnormal level can cause problems in biological processes. Although acetaldehyde is found naturally in many organisms, exposure to high concentrations can have effects on the eyes, respiratory system, etc. Due to the importance of detecting acetaldehyde in environmental samples and biofluids, determination of its concentration is highly demanded. There are some reports showing exposure to high concentrations of acetaldehyde for a long time can increase the risk of cancer by reacting with DNA. In this work, we presented a novel colorimetric method for rapid and sensitive detection of acetaldehyde with high reproducibility using different AgNPs with various morphologies. The redox reaction between AgNPs, 3,3',5,5'-tetramethylbenzidine (TMB) solution, and analytes endows a color change in 15 minutes that is detectable by the naked eye. UV spectrophotometry was further used for quantitative analysis. An iron mold with a hexagonal pattern and liquid paraffin were also used to prepare the paper-based microfluidic substrate, as a low cost, accessible, and rapid detection tool. Different types of AgNPs showed different lower limits of quantification (LLOQ). The AgNPs-Cit and AgNPrs could identify acetaldehyde with linear range of 10^-7 to 10 M and an LLOQ of 10^-7 M. The AgNWs showed the best color change activity with a linear range 10^-5 to 10 M and the lowest diagnostic limit is 10^-5 M. Finally, analysis of human biofluids as real samples were successfully performed using this system.

Breaking the clean room barrier: exploring low-cost alternatives for microfluidic devices

Microfluidics is an interdisciplinary field that encompasses both science and engineering, which aims to design and fabricate devices capable of manipulating extremely low volumes of fluids on a microscale level. The central objective of microfluidics is to provide high precision and accuracy while using minimal reagents and equipment. The benefits of this approach include greater control over experimental conditions, faster analysis, and improved experimental reproducibility. Microfluidic devices, also known as labs-on-a-chip (LOCs), have emerged as potential instruments for optimizing operations and decreasing costs in various of industries, including pharmaceutical, medical, food, and cosmetics. However, the high price of conventional prototypes for LOCs devices, generated in clean room facilities, has increased the demand for inexpensive alternatives. Polymers, paper, and hydrogels are some of the materials that can be utilized to create the inexpensive microfluidic devices covered in this article. In addition, we highlighted different manufacturing techniques, such as soft lithography, laser plotting, and 3D printing, that are suitable for creating LOCs. The selection of materials and fabrication techniques will depend on the specific requirements and applications of each individual LOC. This article aims to provide a comprehensive overview of the numerous alternatives for the development of low-cost LOCs to service industries such as pharmaceuticals, chemicals, food, and biomedicine.

Ultrasensitive Electrochemiluminescence Immunoassay Based on Signal Amplification of 0D Au-2D WS2 Nano-Hybrid Materials

In this study, we proposed a novel Ru(bpy)₃²⁺-Au-WS₂ nanocomposite (Ru-Au-WS₂ NCs) nano-hybrid electrochemiluminescence (ECL) probe for the highly sensitive detection of carcinoembryonic antigen (CEA). This system utilizes Au nanoparticles (Au NPs) as a bridge to graft the high-performance of a Ru(bpy)₃²⁺ ECL emitter and WS₂ nanosheet with excellent electrochemical performance into an ECL platform, which shows outstanding anodic ECL performance and biosensing platform due to the synergetic effect and biocompatibility of Au NPs and WS₂ nanosheet. Because the ECL intensity of Ru(bpy)₃²⁺ is sensitively affected by the antibody-antigen insulator, a preferable linear dependence was obtained in the concentration range of CEA from 1 pg·mL^-1 to 350 ng·mL^-1 with high selectivity (LOD of 0.3 pg·mL^-1, S/N = 3). Moreover, the ECL platform had good reproducibility and stability and exhibited excellent anti-interference performance in the detection process of CEA. We believe that the platform we have developed can expand the opportunities for the detection of additional high specificity-related antibodies/antigens and demonstrate broad prospects for disease diagnosis and biochemical research.

A Nitrocellulose Paper-Based Multi-Well Plate for Point-of-Care ELISA

Low-cost diagnostic tools for point-of-care immunoassays, such as the paper-based enzyme-linked immunoassay (ELISA), have become increasingly important, especially so in the recent COVID-19 pandemic. ELISA is the gold-standard antibody/antigen sensing method. This paper reports an easy-to-fabricate nitrocellulose (NC) paper plate, coupled with a desktop scanner for ELISA, which provides a higher protein immobilization efficiency than the conventional cellulose paper-based ELISA platforms. The experiments were performed using spiked samples for the direct ELISA of rabbit IgG with a limit of detection (LOD) of 1.016 μg/mL, in a measurement range of 10 ng/mL to 1 mg/mL, and for the sandwich ELISA of sperm protein (SP-10) with an LOD of 88.8 ng/mL, in a measurement range of 1 ng/mL to 100 μg/mL. The described fabrication method, based on laser-cutting, is a highly flexible one-step laser micromachining process, which enables the rapid production of low-cost NC paper-based multi-well plates with different sizes for the ELISA measurements.