Controllable deuteration of halogenated compounds by photocatalytic D2O splitting

Mechanical-Force-Induced Non-spontaneous Dehalogenative Deuteration of Aromatic Iodides Enabled by Using Piezoelectric Materials as a Redox Catalyst

The development of green and efficient deuteration methods is of great significance for various fields such as organic synthesis, analytical chemistry, and medicinal chemistry. Herein, we have developed a dehalogenative deuteration strategy using piezoelectric materials as catalysts in a solid-phase system under ball-milling conditions. This non-spontaneous reaction is induced by mechanical force. D2O can serve as both a deuterium source and an electron donor in the transformation, eliminating the need for additional stoichiometric exogenous reductants. A series of (hetero)aryl iodides can be transformed into deuterated products with high deuterium incorporation. This method not only effectively overcomes existing synthetic challenges but can also be used for deuterium labelling of drug molecules and derivatives. Bioactivity experiments with deuterated drug molecule suggest that the D-ipriflavone enhances the inhibitory effects on osteoclast differentiation of BMDMs in vitro.

Deuteration-Driven Photopharmacology: Deuterium-Labeled for Controlling Alpha 7 Nicotinic Acetylcholine Receptors

Photopharmacology is a powerful approach to investigate biological processes and overcomes the common therapeutic challenges in drug development. Enhancing the photopharmacology properties of photoswitches contributes to extend their applications. Deuteration, a tiny structural modification, makes it possible to improve the photopharmacology and photophysical properties of prototype compounds, avoiding extra complex chemical changes or constructing multicomponent systems. In this work, we developed a series of D-labeled azobenzenes to expand the azobenzene photoswitchable library and introduced the D-labeled azobenzene unit into the photoagonist of α7 nicotinic acetylcholine receptors (α7 nAChRs) to investigate the effects of deuteration in photopharmacology. Spectral data indicated that deuteration maintained most of the photophysical properties of azobenzenes. The D-labeled photoagonist exhibited good control of the activity of α7 nAChRs than the prototype photoagonist. These results confirmed that deuteration is a promising strategy to improve the photopharmacological properties.

A Solar to Chemical Strategy: Green Hydrogen as a Means, Not an End

Green hydrogen is the key to the chemical industry achieving net zero emissions. The chemical industry is responsible for almost 2% of all CO2 emissions, with half of it coming from the production of simple commodity chemicals, such as NH3, H2O2, methanol, and aniline. Despite electrolysis driven by renewable power sources emerging as the most promising way to supply all the green hydrogen required in the production chain of these chemicals, in this review, it is worth noting that the photocatalytic route may be underestimated and can hold a bright future for this topic. In fact, the production of H2 by photocatalysis still faces important challenges in terms of activity, engineering, and economic feasibility. However, photocatalytic systems can be tailored to directly convert sunlight and water (or other renewable proton sources) directly into chemicals, enabling a solar-to-chemical strategy. Here, a series of recent examples are presented, demonstrating that photocatalysis can be successfully employed to produce the most important commodity chemicals, especially on NH3, H2O2, and chemicals produced by reduction reactions. The replacement of fossil-derived H2 in the synthesis of these chemicals can be disruptive, essentially safeguarding the transition of the chemical industry to a low-carbon economy.

Photoinduced Catalyst-Free Deuterodefunctionalization of Aryltriazenes with CDCl3

A photoinduced deuterodetriazenation of aryltriazenes with CDCl3 under catalyst-free conditions is reported. The reactions featured simple operation, ecofriendly conditions, readily available reagents, inexpensive D sources, precise site selectivity, and a wide range of substrates. Since aryltriazenes could be readily synthesized from arylamine, this protocol can be used as a general method for easily and accurately incorporating deuterium into aromatic systems by using CDCl3 as a D source.

Electrochemical C-H deuteration of pyridine derivatives with D2O

Herein, we develop a straightforward, metal-free, and acid-/base-free electrochemical C4-selective C - H deuteration of pyridine derivatives with economic and convenient D2O at room temperature. This strategy features an efficient and environmentally friendly approach with high chemo- and regioselectivity, affording a wide range of D-compounds, such as pyridines, quinolones, N-ligands and biorelevant compounds. Notably, the mechanistic experiments and cyclic voltammetry (CV) studies demonstrate that N-butyl-2-phenylpyridinium iodide is a crucial intermediate during the electrochemical transformation, which provides a general and efficient way for deuteration of pyridine derivatives.

Graphene Oxide Membrane Reactor for Electrochemical Deuteration Reactions

The deuteration of organic molecules is considerably important in organic and medicinal chemistry. An electrochemical membrane reactor using proton-conducting graphene oxide (GO) nanosheets was developed to synthesize valuable deuterium-labeled products via an efficient hydrogen-to-deuterium (H/D) exchange under mild conditions at ambient temperature and atmospheric pressure. Deuterons (D+) formed by the anodic oxidation of heavy water (D2O) at the Pt/C anode permeate through the GO membrane to the Pt/C cathode, where organic molecules with functional groups (C≡C and C═O) are deuterated with adsorbed atomic D species. Deuteration occurs in outstanding yields with high levels of D incorporation. We also achieved the electrodeuteration of a drug molecule, ibuprofen, demonstrating the promising feasibility of the GO membrane reactor in the pharmaceutical industry.

Photochemical C(sp3)-H Activation for Diversity-Oriented Synthesis of 3-Functionalized Oxindoles

Heteroatom-adjacent C(sp3) radical cyclization of N-arylacrylamides provides a straightforward pathway to synthesize valuable 3-functionalized oxindoles. Traditional cyclization reactions normally require harsh conditions or transition-metal catalysts. Here, we developed a metal-free, diversity-oriented synthesis of 3-functionalized oxindoles via photochemically induced selective cleavage of C(sp3)-H bonds. A variety of 3-substituted oxindoles with functionalities such as ethers, polyhalogens, benzyl, and formyl groups can be obtained by a rational design. This strategy is characterized by its simple operation and mild conditions, aligning well with the developmental requirements for sustainable chemistry. The gram-scale continuous-flow synthesis and efficient construction of bioactive molecules highlight its practical utility.

The Future of (Radio)-Labeled Compounds in Research and Development within the Life Science Industry

In this review the applications of isotopically labeled compounds are discussed and put into the context of their future impact in the life sciences. Especially discussing their use in the pharma and crop science industries to follow their fate in the environment, in vivo or in complex matrices to understand the potential harm of new chemical structures and to increase the safety of human society.

Palladium-Catalyzed Deuterodehalogenation of Halogenated Aryl Triflates Using Isopropanol-d8 as the Deuterium Source

In this study, a novel and efficient Pd-catalyzed chemoselective deuterodehalogenation reaction of halogenated aryl triflates was developed using isopropanol-d8 as the deuterium source. This chemoselective reaction afforded an unconventional chemoselectivity order of C-Br > C-Cl > C-OTf. This catalytic system was successfully applied to chemoselective hydrodehalogenation of chloroaryl triflates, providing excellent C-Cl chemoselectivity over C-OTf.

Photocatalytic Dehalogenative Deuteration of Halides over a Robust Metal-Organic Framework

Deuterium labelling of organic compounds is an important process in chemistry. We report the first example of photocatalytic dehalogenative deuteration of both arylhalides and alkylhalides (40 substrates) over a metal-organic framework, MFM-300(Cr), using CD3 CN as the deuterium source at room temperature. MFM-300(Cr) catalyses high deuterium incorporation and shows excellent tolerance to various functional groups. Synchrotron X-ray powder diffraction reveals the activation of halogenated substrates via confined binding within MFM-300(Cr). In situ electron paramagnetic resonance spectroscopy confirms the formation of carbon-based radicals as intermediates and reveals the reaction pathway. This protocol removes the use of precious-metal catalysts from state-of-the-art processes based upon direct hydrogen isotope exchange and shows high photocatalytic stability, thus enabling multiple catalytic cycles.

Photocatalytic Umpolung Strategy for the Synthesis of α-Amino Phosphine Oxides and Deuterated Derivatives

Direct, economical, and green synthesis of deuterated α-amino phosphine oxides remains an elusive challenge in synthetic chemistry. Herein, we report a visible-light-driven umpolung strategy for synthesizing deuterated α-amino phosphine oxides from isocyanide using 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene as the photocatalyst and D2O as the deuterium source. Moreover, the streamlined and sustainable methodology can be applied in the modification of amino acids, natural products, and drugs. The strong antiproliferative activity of the desired products indicates that the method could provide a novel privileged scaffold for antitumor drug development.

Electrochemical Late-Stage Functionalization

Late-stage functionalization (LSF) constitutes a powerful strategy for the assembly or diversification of novel molecular entities with improved physicochemical or biological activities. LSF can thus greatly accelerate the development of medicinally relevant compounds, crop protecting agents, and functional materials. Electrochemical molecular synthesis has emerged as an environmentally friendly platform for the transformation of organic compounds. Over the past decade, electrochemical late-stage functionalization (eLSF) has gained major momentum, which is summarized herein up to February 2023.

Designed Nanomaterials for Electrocatalytic Organic Hydrogenation Using Water as the Hydrogen Source

ConspectusThe hydrogenation reaction is one of the most frequently used transformations in organic synthesis. Electrocatalytic hydrogenation by using water (H₂O) as the hydrogen source offers an efficient and sustainable approach to synthesize hydrogenated products under ambient conditions. Such a technique can avoid the use of high-pressure and flammable hydrogen gas or other toxic/expensive hydrogen donors, which usually cause environmental, safety, and cost concerns. Interestingly, utilizing easily available heavy water (D₂O) for deuterated syntheses is also attractive due to the widespread applications of deuterated molecules in organic synthesis and the pharmaceutical industry. Despite impressive achievements, electrode selection mainly relies on trial-and-error modes, and how electrodes dictate reaction outcomes remains elusive. Therefore, the rational design of nanostructured electrodes for driving the electrocatalytic hydrogenation of a series of organics via H₂O electrolysis is developed.In this Account, we review recent advances in the electrocatalytic hydrogenation of different types of organic functional groups, including C≡C, C≡N, C═C, C═O, and C-Br/I bonds, -NO₂, and N-heterocycles, with H₂O over nanostructured cathodes. First, the general reaction steps (reactant/intermediate adsorption, active atomic hydrogen (H*) formation, surface hydrogenation reaction, product desorption) are analyzed, and key factors are proposed to optimize hydrogenation performance (e.g., selectivity, activity, Faradaic efficiency (FE), reaction rate, and productivity) and inhibit side reactions. Then, ex situ and in situ spectroscopic tools to study key intermediates and interpret mechanisms are introduced. Third, based on the knowledge of key reaction steps and mechanisms, we introduce catalyst design principles in detail on how to optimize the adoption of reactants and key intermediates, promote the formation of H* from water electrolysis, inhibit hydrogen evolution and side reactions, and improve the selectivity, reaction rate, FEs, and space-time productivity of products. We then introduce some typical examples. (i) P- and S-modified Pd can decrease C═C adsorption and promote H* formation, enabling semihydrogenation of alkynes with high selectivity and FEs at lower potentials. Then, creating high-curvature nanotips to concentrate the substrates further speeds up the hydrogenation process. (ii) By introducing low-coordination sites into Fe and combining low-coordination sites and surface fluorine to modify Co to optimize the adsorption of intermediates and facilitate H* formation, hydrogenation of nitriles and N-heterocycles with high activity and selectivity is obtained. (iii) By forming isolated Pd sites to induce a specific σ-alkynyl adsorption of alkynes and steering S vacancies of Co₃S_4-x to preferentially adsorb -NO₂, hydrogenation of easily reduced group-decorated alkynes and nitroarenes with high chemoselectivity is realized. (iv) For gas reactant participated reactions, by designing hydrophobic gas diffusion layer-supported ultrasmall Cu nanoparticles to enhance mass transfer, improve H₂O activation, inhibit H₂ formation, and decrease ethylene adsorption, ampere-level ethylene production with a 97.7% FE is accomplished. Finally, we provide an outlook on the current challenges and promising opportunities in this area. We believe that the electrode selection principles summarized here provide a paradigm for designing highly active and selective nanomaterials to achieve electrocatalytic hydrogenation and other organic transformations with fascinating performances.

Selective Iodination Enables Anthocyanin Synthesis to Be More General

The current synthesis routes of anthocyanins are relatively complicated, which significantly hinders their development. We optimized the method by introducing a selective iodination reaction and also established a general scheme for preparing anthocyanin diglycosides. This method allows anthocyanin synthesis to require fewer steps and costs. Based on this, we prepared four common anthocyanins and two anthocyanin diglucosides and measured their antioxidant and anti-insulin resistance activities.

Cesium Amide-Catalyzed Selective Deuteration of Benzylic C-H Bonds with D2 and Application for Tritiation of Pharmaceuticals

Hydrogen isotope exchange (HIE) represents one of the most attractive labeling methods to synthesize deuterium- and tritium-labeled compounds. Catalytic HIE methods that enable site-selective C-H bond activation and exchange labeling with gaseous isotopes D₂ and T₂ are of vital importance, in particular for high-specific-activity tritiation of pharmaceuticals. As part of our interest in exploring s-block metals for catalytic transformations, we found CsN(SiMe₃ )₂ to be an efficient catalyst for selective HIE of benzylic C-H bonds with D₂ gas. The reaction proceeds through a kinetic deprotonative equilibrium that establishes an exchange pathway between C-H bonds and D₂ gas. By virtue of multiple C-H bonds activation and high activity (isotope enrichment up to 99 %), the simple cesium amide catalyst provided a very powerful and practically convenient labeling protocol for synthesis of highly deuterated compounds and high-specific-activity tritiation of pharmaceuticals.

Metal-Free Electrochemically Reductive Deuteration of C═N Bonds with D2O toward Deuterated Amines

Environmentally friendly and highly efficient synthesis of α-deuterated amines is achieved via a concise electrochemical process using D₂O as deuterium source without any external reductants or catalysts. Various imines are compatible, affording the desired products in high yields and D-incorporation. Gram-scale synthesis and flow-cell electrochemistry technology are used to synthesize deuterated pharmaceutical amines and their intermediates. Mechanistic studies reveal a plausible process, including the formation of carbanion species followed by deuterium atom transfer.

Interheteromolecular Hyperconjugation Boosts (De)hydrogenation for Reversible H2 Storage

Interheteromolecular hyperconjugation is ubiquitous in organic systems, affecting bond length, dipole moments, conformations and so on, while its effect on (de)hydrogenation reactivity in a heterogeneous thermo-catalytic system has rarely been explored. Herein, the N-heterocycles containing a benzene ring and aliphatic chain [N-ethylcarbazole (NEC) and N-propylcarbazole (NPC)] were utilized to study the correlation between interheteromolecular hyperconjugation and catalytic (de)hydrogenation. Density functional theory calculations, variable-temperature ¹ H nuclear magnetic resonance spectroscopy, and catalytic experiments showed that the presented hyperconjugation between NEC and NPC weakened the electron cloud density of aromatic rings and thus facilitated the reactivity with hydrogen featuring unpaired electrons. Therefore, an extremely low temperature of 80 °C was enough for the hydrogenation. Moreover, this interheteromolecular hyperconjugation was general in other N-heterocycles (e. g., N-methyindole and NPC) and was also effective to (de)deuterate as revealed by isotope experiments. This work expands the application of interheteromolecular hyperconjugation to heterogeneous thermocatalysis for reversible H₂ storage.

Coupling photocatalytic water oxidation with reductive transformations of organic molecules

The utilization of readily available and non-toxic water by photocatalytic water splitting is highly attractive in green chemistry. Herein we report that light-induced oxidative half-reaction of water splitting is effectively coupled with reduction of organic compounds, which provides a light-induced avenue to use water as an electron donor to enable reductive transformations of organic substances. The present strategy allows various aryl bromides to undergo smoothly the reductive coupling with Pd/g-C₃N₄* as the photocatalyst, giving a pollutive reductant-free method for synthesizing biaryl skeletons. Moreover, the use of green visible-light energy endows this process with more advantages including mild conditions and good functional group tolerance. Although this method has some disadvantages such as a use of environmentally unfriendly 1,2-dioxane, an addition of Na₂CO₃ and so on, it can guide chemists to use water as a reducing agent to develop clean procedures for various organic reactions.

While reductive coupling strategies in organic synthesis are crucial, most require additional sacrificial or toxic reagents. Here, authors demonstrate water as mild reducing agent in the photochemical reduction of organic compounds paired with photocatalytic water oxidation.

One-pot H/D exchange and low-coordinated iron electrocatalyzed deuteration of nitriles in D2O to α,β-deuterio aryl ethylamines

Developing a step-economical approach for efficient synthesis of α,β-deuterio aryl ethylamines (α,β-DAEAs) with high deuterium ratios using an easy-to-handle deuterated source under ambient conditions is highly desirable. Here we report a room-temperature one-pot two-step transformation of aryl acetonitriles to α,β-DAEAs with up to 92% isolated yield and 99% α,β-deuterium ratios using D₂O as a deuterium source. The process involves a fast α-C - H/C - D exchange and tandem electroreductive deuteration of C ≡ N over an in situ formed low-coordinated Fe nanoparticle cathode. The moderate adsorptions of nitriles/imine intermediates and the promoted formation of active hydrogen (H*) on unsaturated Fe sites facilitate the electroreduction process. In situ Raman confirms co-adsorption of aryl rings and the C ≡ N group on the Fe surface. A proposed H*-addition pathway is confirmed by the detected hydrogen and carbon radicals. Wide substrate scope, parallel synthesis of multiple α,β-DAEAs, and successful preparation of α,β-deuterated Melatonin and Komavine highlight the potential.

Electrocatalytic hydrogenation of quinolines with water over a fluorine-modified cobalt catalyst

Room temperature and selective hydrogenation of quinolines to 1,2,3,4-tetrahydroquinolines using a safe and clean hydrogen donor catalyzed by cost-effective materials is significant yet challenging because of the difficult activation of quinolines and H₂. Here, a fluorine-modified cobalt catalyst is synthesized via electroreduction of a Co(OH)F precursor that exhibits high activity for electrocatalytic hydrogenation of quinolines by using H₂O as the hydrogen source to produce 1,2,3,4-tetrahydroquinolines with up to 99% selectivity and 94% isolated yield under ambient conditions. Fluorine surface-sites are shown to enhance the adsorption of quinolines and promote water activation to produce active atomic hydrogen (H*) by forming F⁻-K⁺(H₂O)₇ networks. A 1,4/2,3-addition pathway involving H* is proposed through combining experimental and theoretical results. Wide substrate scopes, scalable synthesis of bioactive precursors, facile preparation of deuterated analogues, and the paired synthesis of 1,2,3,4-tetrahydroquinoline and industrially important adiponitrile at a low voltage highlight the promising applications of this methodology.

Selective hydrogenation of quinolines with easy-to-handle hydrogen donors and cost-effective catalysts is desirable. Here electrocatalytic quinoline hydrogenation to 1,2,3,4-tetrahydroquinolines is reported with water over a fluorine-modified cobalt.

Radical deuteration

Deuterated chemicals are becoming irreplaceable in pharmaceutical engineering, material science and synthetic chemistry. Many excellent reviews have discussed acid/base-dependent or metal-catalyzed deuteration reactions, but radical deuterations have been discussed less. With the development of radical chemistry, there has been a rapid growth in radical deuterium-labelling technology. Diverse mild, cheap and efficient strategies for deuterium atom installation have been reported, and this review summarizes the recent achievements of radical deuteration classified by the reaction types.

Palladium-Catalyzed Synthesis of C-1 Deuterated Aldehydes from (Hetero) Arenes Mediated by C (sp2)-H Thianthrenation

A palladium-catalyzed deuterated formylation of aryl sulfonium salts is prepared conveniently from readily available arenes, which enables the expedient synthesis of a series of structurally diverse C-1 deuterated aldehydes with 96%-99% deuterium incorporation. The easy to handle and cost-effective DCOONa provides a deuterium source, which can be introduced onto the formyl units with excellent selectivity under the palladium-catalytic redox neutral conditions. This catalytic route can accomplish the direct late-stage C-H functionalization of bioactive molecules and natural product derivatives assisted by C (sp²)-H thianthrenation. Moreover, on the basis of this practical approach, several deuterated drugs and analogues could be prepared with excellent levels of deuterium incorporation.

Facile and general electrochemical deuteration of unactivated alkyl halides

Herein, a facile and general electroreductive deuteration of unactivated alkyl halides (X = Cl, Br, I) or pseudo-halides (X = OMs) using D2O as the economical deuterium source was reported. In addition to primary and secondary alkyl halides, sterically hindered tertiary chlorides also work very well, affording the target deuterodehalogenated products with excellent efficiency and deuterium incorporation. More than 60 examples are provided, including late-stage dehalogenative deuteration of natural products, pharmaceuticals, and their derivatives, all with excellent deuterium incorporation (up to 99% D), demonstrating the potential utility of the developed method in organic synthesis. Furthermore, the method does not require external catalysts and tolerates high current, showing possible use in industrial applications.

Rhodium-Catalyzed Deuterated Tsuji-Wilkinson Decarbonylation of Aldehydes with Deuterium Oxide

The recent surge in the applications of deuterated drug candidates has rendered an urgent need for diverse deuterium labeling techniques. Herein, an efficient Rh-catalyzed deuterated Tsuji-Wilkinson decarbonylation of naturally available aldehydes with D₂O is developed. In this reaction, D₂O not only acts as a deuterated reagent and solvent but also promotes Rh-catalyzed decarbonylation. In addition, decarbonylative strategies for the synthesis of terminal monodeuterated alkenes from α,β-unsaturated aldehydes are within reach.

Convergent Synthesis of 1,4-Dicarbonyl Z-Alkenes through Three-Component Coupling of Alkynes, α-Diazo Sulfonium Triflate, and Water

We report a general protocol for the convergent synthesis of 1,4-dicarbonyl Z-alkenes form alkynes using α-diazo sulfonium triflate and water. The C═O, C═C, and C-H bonds are formed under mild conditions with a wide range of functional groups tolerated. The reaction exhibits excellent Z-selectivity and complete regioselectivity. The resulting 1,4-dicarbonyl Z-alkenes can smoothly undergo follow-up conversion to a variety of heteroaromatic scaffolds. Moreover, the reaction also provides a facile access to the corresponding deuterated Z-alkenes and deuterated heteroarenes with a high level of deuterium incorporation (90-97% D-inc.) by directly using D₂O, thus rendering the method highly valuable. The comprehensive mechanistic studies indicate that a free carbyne radical intermediate is formed via the photocatalytic single electron transfer process, and KH₂PO₄ plays a crucial role in significant improvements on yield and selectivity based on density-functional theory calculations, providing a new direction for radical coupling reactions of diazo compounds.

Recent Developments for the Deuterium and Tritium Labeling of Organic Molecules

Organic compounds labeled with hydrogen isotopes play a crucial role in numerous areas, from materials science to medicinal chemistry. Indeed, while the replacement of hydrogen by deuterium gives rise to improved absorption, distribution, metabolism, and excretion (ADME) properties in drugs and enables the preparation of internal standards for analytical mass spectrometry, the use of tritium-labeled compounds is a key technique all along drug discovery and development in the pharmaceutical industry. For these reasons, the interest in new methodologies for the isotopic enrichment of organic molecules and the extent of their applications are equally rising. In this regard, this Review intends to comprehensively discuss the new developments in this area over the last years (2017-2021). Notably, besides the fundamental hydrogen isotope exchange (HIE) reactions and the use of isotopically labeled analogues of common organic reagents, a plethora of reductive and dehalogenative deuteration techniques and other transformations with isotope incorporation are emerging and are now part of the labeling toolkit.

Defective Ultrathin ZnIn2 S4 for Photoreductive Deuteration of Carbonyls Using D2 O as the Deuterium Source

Deuterium (D) labeling is of great value in organic synthesis, pharmaceutical industry, and materials science. However, the state-of-the-art deuteration methods generally require noble metal catalysts, expensive deuterium sources, or harsh reaction conditions. Herein, noble metal-free and ultrathin ZnIn2 S4 (ZIS) is reported as an effective photocatalyst for visible light-driven reductive deuteration of carbonyls to produce deuterated alcohols using heavy water (D2 O) as the sole deuterium source. Defective two-dimensional ZIS nanosheets (D-ZIS) are prepared in a surfactant assisted bottom-up route exhibited much enhanced performance than the pristine ZIS counterpart. A systematic study is carried out to elucidate the contributing factors and it is found that the in situ surfactant modification enabled D-ZIS to expose more defect sites for charge carrier separation and active D-species generation, as well as high specific surface area, all of which are beneficial for the desirable deuteration reaction. This work highlights the great potential in developing low-cost semiconductor-based photocatalysts for organic deuteration in D2 O, circumventing expensive deuterium reagents and harsh conditions.

Copper-catalysed low-temperature water-gas shift reaction for selective deuteration of aryl halides

The introduction of deuterium atoms into organic compounds is of importance for basic chemistry, material sciences, and the development of drugs in the pharmaceutical industry, specifically for identification and quantification of metabolites. Hence, methodologies for the synthesis of selectively labelled compounds continue to be a major area of interest for many scientists. Herein, we present a practical and stable heterogeneous copper catalyst, which permits for dehalogenative deuteration via water–gas shift reaction at comparably low temperature. This novel approach allows deuteration of diverse (hetero)aryl halides with good functional group tolerance, and no reduction of the aromatic rings or other easily reducible formyl and cyano groups. Multi-gram experiments show the potential of this method in organic synthesis and medicinal chemistry.

A practical and stable heterogeneous copper catalyst has been developed for dehalogenative deuteration via water–gas shift reaction at low temperature, allowing deuteration of diverse (hetero)aryl halides with good functional group tolerance.

Synthesis of Deuterated (E)-Alkene through Xanthate-Mediated Hydrogen-Deuterium Exchange Reactions

Herein we have developed a reversible hydrogen-deuterium exchange reaction of nonactivated olefins. By using EtOCS₂K as a mediator, the H/D exchange reaction was realized through repeated addition and elimination reactions, demonstrating reversible H/D exchange between ordinary olefins and deuterated olefins. Using the lowest cost D₂O without precious metal catalysts and ligands, a broad spectrum of compatibility of functional groups was achieved.

Photoredox-Catalyzed Simultaneous Olefin Hydrogenation and Alcohol Oxidation over Crystalline Porous Polymeric Carbon Nitride

Booming of photocatalytic water splitting technology (PWST) opens a new avenue for the sustainable synthesis of high-value-added hydrogenated and oxidized fine chemicals, in which the design of efficient semiconductors for the in-situ and synergistic utilization of photogenerated redox centers are key roles. Herein, a porous polymeric carbon nitride (PPCN) with a crystalline backbone was constructed for visible light-induced photocatalytic hydrogen generation by photoexcited electrons, followed by in-situ utilization for olefin hydrogenation. Simultaneously, various alcohols were selectively transformed to valuable aldehydes or ketones by photoexcited holes. The porosity of PPCN provided it with a large surface area and a short transfer path for photogenerated carriers from the bulk to the surface, and the crystalline structure facilitated photogenerated charge transfer and separation, thus enhancing the overall photocatalytic performance. High reactivity and selectivity, good functionality tolerance, and broad reaction scope were achieved by this concerted photocatalysis system. The results contribute to the development of highly efficient semiconductor photocatalysts and synergistic redox reaction systems based on PWST for high-value-added fine chemical production.

Spontaneous conversion of prenyl halides to acids: application in metal-free preparation of deuterated compounds under mild conditions

Here we reveal a simple generation of deuterium halide (DX) from common and inexpensive reagents readily available in a synthetic chemistry laboratory, i.e. prenyl-, allyl-, and propargyl halides, under mild conditions. We envisaged that in situ generation of an acid, deuterium halide, would be useful for acid-catalyzed reactions and could be employed for organocatalytic deuteration. The present work reports a metal-free method for deuterium labeling covering a broad range of substrate including phenolic compounds (i.e. flavonoids and stilbenes), indoles, pyrroles, carbonyl compounds, and steroids. This method was also applied for commonly used drugs such as loxoprofen, haloperidol, stanolone, progesterone, androstenedione, donepezil, ketorolac, adrenosterone, cortisone, pregnenolone, and dexamethasone. A gram-scale chromatography-free synthesis of some deuterated compounds is demonstrated in this work. This work provides a simple, clean and by-product-free, site-selective deuteration, and the deuterated products are obtained without chromatographic separation. When applying these initiators for other acid-catalyzed reactions, the deuterium isotope effects of DX may provide products which are different from those obtained from reactions using common acids. Although the mechanism of the spontaneous transformation of prenyl halides to acid is unclear, this overlooked chemistry may be useful for many reactions.

Light-driven decarboxylative deuteration enabled by a divergently engineered photodecarboxylase

Despite the well-established chemical processes for C-D bond formation, the toolbox of enzymatic methodologies for deuterium incorporation has remained underdeveloped. Here we describe a photodecarboxylase from Chlorella variabilis NC64A (CvFAP)-catalyzed approach for the decarboxylative deuteration of various carboxylic acids by employing D2O as a cheap and readily available deuterium source. Divergent protein engineering of WT-CvFAP is implemented using Focused Rational Iterative Site-specific Mutagenesis (FRISM) as a strategy for expanding the substrate scope. Using specific mutants, several series of substrates including different chain length acids, racemic substrates as well as bulky cyclic acids are successfully converted into the deuterated products (>40 examples). In many cases WT-CvFAP fails completely. This approach also enables the enantiocomplementary kinetic resolution of racemic acids to afford chiral deuterated products, which can hardly be accomplished by existing methods. MD simulations explain the results of improved catalytic activity and stereoselectivity of WT CvFAP and mutants.

Site-selective D2O-mediated deuteration of diaryl alcohols via quantum dots photocatalysis

Owing to the high synthetic value of deuteration in the pharmaceutical industry, we describe herein the conversion of a range of aromatic ketones to deuterium-labeled products in good to excellent yields. Efficient and site-selective deuteration of benzyl alcohols by D₂O with visible light irradiation of quantum dots (QDs), together with gram-scale synthesis and photocatalyst recycling experiments indicated the potential of the developed method in practical organic synthesis.

Construction of C-C bonds via photoreductive coupling of ketones and aldehydes in the metal-organic-framework MFM-300(Cr)

Construction of C-C bonds via reductive coupling of aldehydes and ketones is hindered by the highly negative reduction potential of these carbonyl substrates, particularly ketones, and this renders the formation of ketyl radicals extremely endergonic. Here, we report the efficient activation of carbonyl compounds by the formation of specific host-guest interactions in a hydroxyl-decorated porous photocatalyst. MFM-300(Cr) exhibits a band gap of 1.75 eV and shows excellent catalytic activity and stability towards the photoreductive coupling of 30 different aldehydes and ketones to the corresponding 1,2-diols at room temperature. Synchrotron X-ray diffraction and electron paramagnetic resonance spectroscopy confirm the generation of ketyl radicals via confinement within MFM-300(Cr). This protocol removes simultaneously the need for a precious metal-based photocatalyst or for amine-based sacrificial agents for the photochemical synthesis.

Reduced Phenalenyl in Catalytic Dehalogenative Deuteration and Hydrodehalogenation of Aryl Halides

Dehalogenative deuteration reactions are generally performed through metal-mediated processes. This report demonstrates a mild protocol for hydrodehalogenation and dehalogenative deuteration of aryl/heteroaryl halides (39 examples) using a reduced odd alternant hydrocarbon phenalenyl under transition metal-free conditions and has been employed successfully for the incorporation of deuterium in various biologically active compounds. The combined approach of experimental and theoretical studies revealed a single electron transfer-based mechanism.

Organophotocatalytic selective deuterodehalogenation of aryl or alkyl chlorides

Development of practical deuteration reactions is highly valuable for organic synthesis, analytic chemistry and pharmaceutic chemistry. Deuterodehalogenation of organic chlorides tends to be an attractive strategy but remains a challenging task. We here develop a photocatalytic system consisting of an aryl-amine photocatalyst and a disulfide co-catalyst in the presence of sodium formate as an electron and hydrogen donor. Accordingly, many aryl chlorides, alkyl chlorides, and other halides are converted to deuterated products at room temperature in air (>90 examples, up to 99% D-incorporation). The mechanistic studies reveal that the aryl amine serves as reducing photoredox catalyst to initiate cleavage of the C-Cl bond, at the same time as energy transfer catalyst to induce homolysis of the disulfide for consequent deuterium transfer process. This economic and environmentally-friendly method can be used for site-selective D-labeling of a number of bioactive molecules and direct H/D exchange of some drug molecules.

Deuterodehalogenation of organic chlorides is a useful strategy to install deuterium atoms at specific positions, however, it has several drawbacks. In this study, the authors report an organophotocatalytic system consisting of an aryl-amine-based photocatalyst and a common disulfide co-catalyst, for efficient deuteration of a wide range of aryl chlorides, alkyl chlorides and other halides, at room temperature in air.

Direct Allylic C(sp3 )-H and Vinylic C(sp2 )-H Thiolation with Hydrogen Evolution by Quantum Dots and Visible Light

Direct allylic C-H thiolation is straightforward for allylic C(sp³ )-S bond formation. However, strong interactions between thiol and transition metal catalysts lead to deactivation of the catalytic cycle or oxidation of sulfur atom under oxidative condition. Thus, direct allylic C(sp³ )-H thiolation has proved difficult. Represented herein is an exceptional for direct, efficient, atom- and step-economic thiolation of allylic C(sp³ )-H and thiol S-H under visible light irradiation. Radical trapping experiments and electron paramagnetic resonance (EPR) spectroscopy identified the allylic radical and thiyl radical generated on the surface of photocatalyst quantum dots (QDs). The C-S bond formation does not require external oxidants and radical initiators, and hydrogen (H₂ ) is produced as byproduct. When vinylic C(sp² )-H was used instead of allylic C(sp³ )-H bond, the radical-radical cross-coupling of C(sp² )-H and S-H was achieved with liberation of H₂ . Such a unique transformation opens up a door toward direct C-H and S-H coupling for valuable organosulfur chemistry.