High-power hybrid biofuel cells using layer-by-layer assembled glucose oxidase-coated metallic cotton fibers

Biomimetic Exogenous "Tissue Batteries" as Artificial Power Sources for Implantable Bioelectronic Devices Manufacturing

Implantable bioelectronic devices (IBDs) have gained attention for their capacity to conformably detect physiological and pathological signals and further provide internal therapy. However, traditional power sources integrated into these IBDs possess intricate limitations such as bulkiness, rigidity, and biotoxicity. Recently, artificial "tissue batteries" (ATBs) have diffusely developed as artificial power sources for IBDs manufacturing, enabling comprehensive biological-activity monitoring, diagnosis, and therapy. ATBs are on-demand and designed to accommodate the soft and confining curved placement space of organisms, minimizing interface discrepancies, and providing ample power for clinical applications. This review presents the near-term advancements in ATBs, with a focus on their miniaturization, flexibility, biodegradability, and power density. Furthermore, it delves into material-screening, structural-design, and energy density across three distinct categories of TBs, distinguished by power supply strategies. These types encompass innovative energy storage devices (chemical batteries and supercapacitors), power conversion devices that harness power from human-body (biofuel cells, thermoelectric nanogenerators, bio-potential devices, piezoelectric harvesters, and triboelectric devices), and energy transfer devices that receive and utilize external energy (radiofrequency-ultrasound energy harvesters, ultrasound-induced energy harvesters, and photovoltaic devices). Ultimately, future challenges and prospects emphasize ATBs with the indispensability of bio-safety, flexibility, and high-volume energy density as crucial components in long-term implantable bioelectronic devices.

Personal Thermoregulation by Moisture-Engineered Materials

Personal thermal management can effectively manage the skin microenvironment, improve human comfort, and reduce energy consumption. In personal thermal-management technology, owing to the high latent heat of water evaporation in wet-response textiles, heat- and moisture-transfer coexist and interact with each other. In the last few years, with rapid advances in materials science and innovative polymers, humidity-sensitive textiles have been developed for personal thermal management. However, a large gap exists between the conceptual laboratory-scale design and actual textile. Here, moisture-responsive textiles based on flap opening and closing, those based on yarn/fiber deformation, and sweat-evaporation regulation based on textile design for personal thermoregulation are reviewed, and the corresponding mechanisms and research progress are discussed. Finally, the existing engineering and scientific limitations and future developments are considered to resolve the existing issues and accelerate the practical application of moisture-responsive textiles and related technologies.

Porous Conductive Textiles for Wearable Electronics

Over the years, researchers have made significant strides in the development of novel flexible/stretchable and conductive materials, enabling the creation of cutting-edge electronic devices for wearable applications. Among these, porous conductive textiles (PCTs) have emerged as an ideal material platform for wearable electronics, owing to their light weight, flexibility, permeability, and wearing comfort. This Review aims to present a comprehensive overview of the progress and state of the art of utilizing PCTs for the design and fabrication of a wide variety of wearable electronic devices and their integrated wearable systems. To begin with, we elucidate how PCTs revolutionize the form factors of wearable electronics. We then discuss the preparation strategies of PCTs, in terms of the raw materials, fabrication processes, and key properties. Afterward, we provide detailed illustrations of how PCTs are used as basic building blocks to design and fabricate a wide variety of intrinsically flexible or stretchable devices, including sensors, actuators, therapeutic devices, energy-harvesting and storage devices, and displays. We further describe the techniques and strategies for wearable electronic systems either by hybridizing conventional off-the-shelf rigid electronic components with PCTs or by integrating multiple fibrous devices made of PCTs. Subsequently, we highlight some important wearable application scenarios in healthcare, sports and training, converging technologies, and professional specialists. At the end of the Review, we discuss the challenges and perspectives on future research directions and give overall conclusions. As the demand for more personalized and interconnected devices continues to grow, PCT-based wearables hold immense potential to redefine the landscape of wearable technology and reshape the way we live, work, and play.

Enzymatic biofuel cell: A potential power source for self-sustained smart textiles

Self-sustained smart textiles require a miniaturized and flexible power source, while the state-of-the-art lithium-ion battery cannot be seamlessly integrated into smart textiles. Enzymatic biofuel cells (EBFC), utilizing physiological glucose or lactate as fuels to convert chemical energy into electricity, are a potential alternative power source. In comparison to other proposed energy harvesters relying on solar and biomechanical energy, EBFCs feature several key properties, including continuous power generation, biocompatible interfaces without using toxic elements, simple configuration without extra packaging, and biodegradability. There is an urgent need to introduce EBFCs to the researchers working on smart textiles, who typically are not expert on bioelectrochemistry. This minireview first introduces the working principle of EBFC and then summarizes its recent progress on fibers, yarns, and textiles. It's expected that this review can help to bridge the knowledge gap and provide the community of smart textiles with information on both the strengths and limitations of EBFCs.

Single-atom nanozymes with peroxidase-like activity: A review

Single-atom nanozymes (SANs) are nanomaterials-based nanozymes with atomically dispersed enzyme-like active sites. SANs offer improved as well as tunable catalytic activity. The creation of extremely effective SANs and their potential uses have piqued researchers' curiosity due to their advantages of cheap cost, variable catalytic activity, high stability, and large-scale production. Furthermore, SANs with uniformly distributed active centers and definite coordination structures offer a distinctive opportunity to investigate the structure-activity correlation and control the geometric and electrical features of metal centers. SANs have been extensively explored in photo-, thermal-, and electro-catalysis. However, SANs suffer from the following disadvantages, such as efficiency, non-mimicking of the 3-D complexity of natural enzymes, limited and narrow range of artificial SANs, and biosafety aspects. Among a quite limited range of artificial SANs, the peroxidase action of SANs has attracted significant research attention in the last five years with the aim of producing reactive oxygen species for use in cancer therapy, and water treatment among many other applications. In this review, we explore the recent progress of different SANs as peroxidase mimics, the role of the metal center in enzymatic activity, possible prospects, and underlying limitations in real-time applications.

Miniature battery-free bioelectronics

Miniature wireless bioelectronic implants that can operate for extended periods of time can transform how we treat disorders by acting rapidly on precise nerves and organs in a way that drugs cannot. To reach this goal, materials and methods are needed to wirelessly transfer energy through the body or harvest energy from the body itself. We review some of the capabilities of emerging energy transfer methods to identify the performance envelope for existing technology and discover where opportunities lie to improve how much-and how efficiently-we can deliver energy to the tiny bioelectronic implants that can support emerging medical technologies.

Weavable yarn-shaped supercapacitor in sweat-activated self-charging power textile for wireless sweat biosensing

The yarn-based sweat-activated battery (SAB) is a promising energy source for textile electronics due to its excellent skin compatibility, great weavability, and stable electric output. However, its power density is too low to support real-time monitoring and wireless data transmission. Here, we developed a scalable, high-performance sweat-based yarn biosupercapacitor (SYBSC) with two symmetrically aligned electrodes made by wrapping hydrophilic cotton fibers on polypyrrole/poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate)-modified stainless steel yarns. Once activated with artificial sweat, the SYBSC could offer a high areal capacitance of 343.1 mF cm^-2 at 0.5 mA cm^-2. After 10,000 times of bending under continuous charge-discharge cycles and 25 cycles of machine washing, the device could retain the capacitance at rates of 68% and 73%, respectively. The SYBSCs were integrated with yarn-shaped SABs to produce hybrid self-charging power units. The hybrid units, pH sensing fibers, and a mini-analyzer were woven into a sweat-activated all-in-one sensing textile, in which the hybrid, self-charging units could power the analyzer for real-time data collection and wireless transmission. The all-in-one electronic textile could be successfully employed to real-time monitor the pH values of the volunteers' sweat during exercise. This work can promote the development of self-charging electronic textiles for monitoring human healthcare and exercise intensity.

Enhancement of antibacterial properties and biocompatibility of Ti6Al4V by graphene oxide/strontium nanocomposite electrodepositing

Ti₆Al₄V is a widely used orthopedic implant material in clinics. Due to its poor antibacterial properties, surface modification is required to prevent peri-implantation infection. However, chemical linkers used for surface modification have generally been reported to have detrimental effects on cell growth. In this work, by optimizing parameters related to electrodeposition, a composite structural coating with graphene oxide (GO) compact films in the inner layer and 35 nm diameter strontium (Sr) nanoparticles in the outer layer was constructed on the surface of Ti₆Al₄V without using substance harmful to bone marrow mesenchymal stem cells (BMSCs) growth. The antibacterial properties of Ti₆Al₄V are enhanced by the controlled release of Sr ions and incomplete masking of the GO surface, showing excellent antibacterial activity against Staphylococcus aureus in bacterial culture assays. The biomimetic GO/Sr coating has a reduced roughness of the implant surface and a water contact angle of 44.1°, improving the adhesion, proliferation and differentiation of BMSCs. Observations of synovial tissue and fluid in the joint in an implantation model of rabbit knee also point to the superior anti-infective properties of the novel GO/Sr coating. In summary, the novel GO/Sr nanocomposite coating on the surface of Ti₆Al₄V effectively prevents surface colonization of Staphylococcus aureus and eliminates local infections in vitro and in vivo.

Blood-Glucose-Powered Metabolic Fuel Cell for Self-Sufficient Bioelectronics

Currently available bioelectronic devices consume too much power to be continuously operated on rechargeable batteries, and are often powered wirelessly, with attendant issues regarding reliability, convenience, and mobility. Thus, the availability of a robust, self-sufficient, implantable electrical power generator that works under physiological conditions would be transformative for many applications, from driving bioelectronic implants and prostheses to programing cellular behavior and patients' metabolism. Here, capitalizing on a new copper-containing, conductively tuned 3D carbon nanotube composite, an implantable blood-glucose-powered metabolic fuel cell is designed that continuously monitors blood-glucose levels, converts excess glucose into electrical power during hyperglycemia, and produces sufficient energy (0.7 mW cm^-2 , 0.9 V, 50 mm glucose) to drive opto- and electro-genetic regulation of vesicular insulin release from engineered beta cells. It is shown that this integration of blood-glucose monitoring with elimination of excessive blood glucose by combined electro-metabolic conversion and insulin-release-mediated cellular consumption enables the metabolic fuel cell to restore blood-glucose homeostasis in an automatic, self-sufficient, and closed-loop manner in an experimental model of type-1 diabetes.

Skin-Interfaced Wearable Sweat Sensors for Precision Medicine

Wearable sensors hold great potential in empowering personalized health monitoring, predictive analytics, and timely intervention toward personalized healthcare. Advances in flexible electronics, materials science, and electrochemistry have spurred the development of wearable sweat sensors that enable the continuous and noninvasive screening of analytes indicative of health status. Existing major challenges in wearable sensors include: improving the sweat extraction and sweat sensing capabilities, improving the form factor of the wearable device for minimal discomfort and reliable measurements when worn, and understanding the clinical value of sweat analytes toward biomarker discovery. This review provides a comprehensive review of wearable sweat sensors and outlines state-of-the-art technologies and research that strive to bridge these gaps. The physiology of sweat, materials, biosensing mechanisms and advances, and approaches for sweat induction and sampling are introduced. Additionally, design considerations for the system-level development of wearable sweat sensing devices, spanning from strategies for prolonged sweat extraction to efficient powering of wearables, are discussed. Furthermore, the applications, data analytics, commercialization efforts, challenges, and prospects of wearable sweat sensors for precision medicine are discussed.

Defect-Enriched Graphene Nanoribbons Tune the Adsorption Behavior of the Mediator to Boost the Lactate/Oxygen Biofuel Cell

Owing to the high efficiency and specificity in moderate conditions, enzymatic biofuel cells (EBFCs) have gained significant interest as a promising energy source for wearable devices. However, the instability of the bioelectrode and the lack of efficient electrical communication between the enzymes and electrodes are the main obstacles. Herein, defect-enriched 3D graphene nanoribbons (GNRs) frameworks are fabricated by unzipping multiwall carbon nanotubes, followed by thermal annealing. It is found that defective carbon shows stronger adsorption energy towards the polar mediators than the pristine carbon, which is beneficial to improving the stability of the bioelectrodes. Consequently, the EBFCs equipped with the GNRs exhibit a significantly enhanced bioelectrocatalytic performance and operational stability, delivering an open-circuit voltage and power density of 0.62 V, 70.7 μW/cm², and 0.58 V, 18.6 μW/cm² in phosphate buffer solution and artificial tear, respectively, which represent the high levels among the reported literature. This work provides a design principle according to which defective carbon materials could be more suitable for the immobilization of biocatalytic components in the application of EBFCs.

Air-Stable Radical Organic Cages as Cascade Nanozymes for Enhanced Catalysis

The pursuit of single-assembled molecular cage reactors for complex tandem reactions is a long-standing target in biomimetic catalysis but still a grand challenge. Herein, nanozyme-like organic cages are reported by engineering air-stable radicals into the skeleton upon photoinduced electron transfer. The generation of radicals is accompanied by single-crystal structural transformation and exhibits superior stability over six months in air. Impressively, the radicals throughout the cage skeleton can mimic the peroxidase of natural enzymes to decompose H₂ O₂ into OH· and facilitate oxidation reactions. Furthermore, an integrated catalyst by encapsulating Au clusters (glucose oxidase mimics) into the cage has been developed, in which the dual active sites (Au cluster and radical) are spatially isolated and can work as cascade nanozymes to prominently promote the enzyme-like tandem reaction via a substrate channeling effect.

Functional Fiber Materials to Smart Fiber Devices

The development of fiber materials has accompanied the evolution of human civilization for centuries. Recent advances in materials science and chemistry offered fibers new applications with various functions, including energy harvesting, energy storing, displaying, health monitoring and treating, and computing. The unique one-dimensional shape of fiber devices endows them advantages to work as human-interfaced electronics due to the small size, lightweight, flexibility, and feasibility for integration into large-scale textile systems. In this review, we first present a discussion of the basics of fiber materials and the design principles of fiber devices, followed by a comprehensive analysis on recently developed fiber devices. Finally, we provide the current challenges facing this field and give an outlook on future research directions. With novel fiber devices and new applications continuing to be discovered after two decades of research, we envision that new fiber devices could have an important impact on our life in the near future.

Miniaturized Microfluidic Electrochemical Biosensors Powered by Enzymatic Biofuel Cell

Electrochemical biosensors, in which enzymatic biofuel cells simultaneously work as energy power and signal generators, have become a research hotspot. They display the merits of power self-support, a simplified structure, in vivo operational feasibility, online and timely monitoring, etc. Since the concept of enzymatic biofuel cell-powered biosensors (EBFC-SPBs) was first proposed, its applications in health monitoring have scored tremendous achievements. However, the creation and practical application of portable EBFC-SPBs are still impeded by the difficulty in their miniaturization. In recent years, the booming microfluidic technology has powerfully pushed forward the progress made in miniaturized and portable EBFC-SPBs. This brief review recalls and summarizes the achievements and progress made in miniaturized EBFC-SPBs. In addition, we also discuss the advantages and challenges that microfluidic and screen-printing technologies provide to wearable and disposable EBFC-SPBs.

Immobilization of Glucose Oxidase on Glutathione Capped CdTe Quantum Dots for Bioenergy Generation

An efficient immobilization of Glucose oxidase (GOx) on an appropriate substrate is one of the main challenges of developing fuel cells that allow energy to be obtained from renewable substrates such as carbohydrates in physiological environments. The research importance of biofuel cells relies on their experimental robustness and high compatibility with biological organisms such as tissues or the bloodstream with the aim of obtaining electrical energy even from living systems. In this work, we report the use of 5,10,15,20 tetrakis (1-methyl-4-pyridinium) porphyrin and glutathione capped CdTe Quantum dots (GSH-CdTeQD) as a support matrix for the immobilization of GOx on carbon surfaces. Fluorescent GSH-CdTeQD particles were synthesized and their characterization by UV-Vis spectrophotometry showed a particle size between 5–7 nm, which was confirmed by DLS and TEM measurements. Graphite and Toray paper electrodes were modified by a drop coating of porphyrin, GSH-CdTeQD and GOx, and their electrochemical activity toward glucose oxidation was evaluated by cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Additionally, GOx modified electrode activity was explored by scanning electrochemical microscopy, finding that near to 70% of the surface was covered with active enzyme. The modified electrodes showed a glucose sensitivity of 0.58 ± 0.01 μA/mM and an apparent Michaelis constant of 7.8 mM. The addition of BSA blocking protein maintained the current response of common interferent molecules such as ascorbic acid (AA) with less than a 5% of interference percentage. Finally, the complex electrodes were employed as anodes in a microfluidic biofuel cell (μBFC) in order to evaluate the performance in energy production. The enzymatic anodes used in the μBFC allowed us to obtain a current density of 7.53 mAcm−2 at the maximum power density of 2.30 mWcm−2; an open circuit potential of 0.57 V was observed in the biofuel cell. The results obtained suggest that the support matrix porphyrin and GSH-CdTeQD is appropriate to immobilize GOx while preserving the enzyme’s catalytic activity. The reported electrode arrangement is a viable option for bioenergy production and/or glucose quantification.

Fibril-Type Textile Electrodes Enabling Extremely High Areal Capacity through Pseudocapacitive Electroplating onto Chalcogenide Nanoparticle-Encapsulated Fibrils

Effective incorporation of conductive and energy storage materials into 3D porous textiles plays a pivotal role in developing and designing high-performance energy storage devices. Here, a fibril-type textile pseudocapacitor electrode with outstanding capacity, good rate capability, and excellent mechanical stability through controlled interfacial interaction-induced electroplating is reported. First, tetraoctylammonium bromide-stabilized copper sulfide nanoparticles (TOABr-CuS NPs) are uniformly assembled onto cotton textiles. This approach converts insulating textiles to conductive textiles preserving their intrinsically porous structure with an extremely large surface area. For the preparation of textile current collector with bulk metal-like electrical conductivity, Ni is additionally electroplated onto the CuS NP-assembled textiles (i.e., Ni-EPT). Furthermore, a pseudocapacitive NiCo-layered double hydroxide (LDH) layer is subsequently electroplated onto Ni-EPT for the cathode. The formed NiCo-LDH electroplated textiles (i.e., NiCo-EPT) exhibit a high areal capacitance of 12.2 F cm^-2 (at 10 mA cm^-2 ), good rate performance, and excellent cycling stability. Particularly, the areal capacity of NiCo-EPT can be further increased through their subsequent stacking. The 3-stack NiCo-EPT delivers an unprecedentedly high areal capacitance of 28.8 F cm^-2 (at 30 mA cm^-2 ), which outperforms those of textile-based pseudocapacitor electrodes reported to date.

A self-powered and drug-free diabetic wound healing patch breaking hyperglycemia and low H2O2 limitations and precisely sterilizing driven by electricity

Accelerating diabetes-related chronic wound healing is a long-sought-after goal in diabetes management. However, therapeutic strategies based on antibiotics or catalysts still face great challenges to break the limitations of antimicrobial resistance, low H2O2 and the blocking effect of bacterial biofilms on antibiotic/catalyst penetration. Herein, we reported a glucose biofuel cell-powered and drug-free antibacterial patch, which consisted of an MAF-7 protected glucose oxidase/horseradish peroxidase anode and a horseradish peroxidase cathode, for treating diabetic wounds. This self-powered patch could take high blood glucose as fuel to generate electricity and abundant reactive oxygen species (ROS) in situ, synergistically regulating local hyperglycemia and breaking the limitations of insufficient ROS caused by low H2O2 levels. In particular, the electric field created by the GBFC could drive the negatively charged bacteria to adhere firmly to the electrode surface. As a result, the ROS produced in situ on the electrodes was localized to the bacteria, realizing precise sterilization. In vivo experiments confirmed that this self-powered patch enabled the wounds on diabetic mice to take a mere 10 days to eliminate inflammation and form mature skin with new hair follicles, demonstrating its great potential in treating bacteria-infected diabetic wounds.

Recent advancements in the field of flexible/wearable enzyme fuel cells

This review article focusses on new advances in the field of enzyme fuel cells (EFCs), especially, on flexible materials which can be used to make flexible EFCs for wearable devices, three-dimensional (3D) printed structures to prepare electrodes for EFCs and micro/nano electromechanical structures (MEMS/NEMS) to fabricate micro-EFCs. Particular attention is given to newly developed approaches to obtain efficient electrodes for harvesting energy via EFCs. This review article explains the various attributes of these recently developing technologies and their ability to mitigate the energy requirements of flexible/wearable bioelectronic devices. Besides discussing key milestones achieved, this perspective review article also emphasizes the main hurdles that are currently impeding the realization of flexible/wearable EFCs. We have also emphasized on the major hurdles related to the flexible materials required to fabricate wearable EFCs, suitable 3D printing techniques required, and MEMS and NEMS to fabricate micro-EFCs. In all the recently developed techniques, there are some common issues like stability, low power output, mechanical strength and flexibility. This review article also provides various routes to mitigate these issues. The main aim of this perspective article is to develop curiosity among the researchers of various fields to team up in order to address the huge challenges that restrict the real-world application of flexible/wearable EFCs. Such collaboration is important to harness the full potential of EFCs. It is requested to read this review article with supporting information to get the complete essence.

Engineering Self-Powered Electrochemical Sensors Using Analyzed Liquid Sample as the Sole Energy Source

Many healthcare and environmental monitoring devices use electrochemical techniques to detect and quantify analytes. With sensors progressively becoming smaller-particularly in point-of-care (POC) devices and wearable platforms-it creates the opportunity to operate them using less energy than their predecessors. In fact, they may require so little power that can be extracted from the analyzed fluids themselves, for example, blood or sweat in case of physiological sensors and sources like river water in the case of environmental monitoring. Self-powered electrochemical sensors (SPES) can generate a response by utilizing the available chemical species in the analyzed liquid sample. Though SPESs generate relatively low power, capable devices can be engineered by combining suitable reactions, miniaturized cell designs, and effective sensing approaches for deciphering analyte information. This review details various such sensing and engineering approaches adopted in different categories of SPES systems that solely use the power available in liquid sample for their operation. Specifically, the categories discussed in this review cover enzyme-based systems, battery-based systems, and ion-selective electrode-based systems. The review details the benefits and drawbacks with these approaches, as well as prospects of and challenges to accomplishing them.

Self-Sustainable Biomedical Devices Powered by RF Energy: A Review

Wearable and implantable medical devices (IMDs) have come a long way in the past few decades and have contributed to the development of many personalized health monitoring and therapeutic applications. Sustaining these devices with reliable and long-term power supply is still an ongoing challenge. This review discusses the challenges and milestones in energizing wearable and IMDs using the RF energy harvesting (RFEH) technique. The review highlights the main integrating frontend blocks such as the wearable and implantable antenna design, matching network, and rectifier topologies. The advantages and bottlenecks of adopting RFEH technology in wearable and IMDs are reviewed, along with the system elements and characteristics that enable these devices to operate in an optimized manner. The applications of RFEH in wearable and IMDs medical devices are elaborated in the final section of this review. This article summarizes the recent developments in RFEH, highlights the gaps, and explores future research opportunities.

New strategies for energy supply of cardiac implantable devices

Background

Heart disease and atrial fibrillation are the leading causes of death worldwide. Patient morbidity and mortality associated with cardiovascular disease can be reduced by more accurate and continuous diagnostic and therapeutic tools provided by cardiovascular implantable electronic devices (CIEDs).

Objectives

Long-term operation of CIEDs continues to be a challenge due to limited battery life and the associated risk of device failure. To overcome this issue, new approaches for autonomous battery supply are being investigated.

Results

Here, the state of the art in CIED power supply is presented and an overview of current strategies for autonomous power supply in the cardiovascular field is given, using the body as a sustainable energy source. Finally, future challenges and potentials as well as advanced features for CIEDs are discussed.

Conclusion

CIEDs need to fulfil more requirements for diagnostic and telemetric functions, which leads to higher energy requirements. Ongoing miniaturization and improved sensor technologies will help in the development of new devices.

Three-Dimensional Pinecone-like Binder-Free Pt-TiO2 Nanorods on Ti Mesh Structures: Synthesis, Characterization and Electroactivity towards Ethanol Oxidation

We report here the synthesis of binderless and template-less three-dimensional (3D) pinecone-shaped Pt/TiO₂/Ti mesh structure. The TiO₂ hydrothermally synthesized onto Ti mesh is composed of a mixture of flower-like nanorods and vertically aligned bar-shaped structures, whereas Pt film grown by pulsed laser deposition displays a smooth surface. XRD analyses reveal an average crystallite size of 41.4 nm and 68.5 nm of the TiO₂ nanorods and Pt, respectively. In H₂SO₄ solution, the platinum oxide formation at the Pt/TiO₂/Ti mesh electrode is 180 mV more negative than that at the Pt/Ti mesh electrode, indicating that TiO₂ provides oxygeneous species at lower potentials, which will facilitate the removal of CO-like intermediates and accelerate an ethanol oxidation reaction (EOR). Indeed, the Pt/TiO₂/Ti mesh catalyst exhibits current activity of 1.19 mA towards an EOR at a remarkably superior rate of 4.4 times that of the Pt/Ti mesh electrode (0.27 mA). Moreover, the presence of TiO₂ as a support to Pt delivers a steady-state current of 2.1 mA, with an increment in durability of 6.6 times compared to Pt/Ti mesh (0.32 mA). Pt is chosen here as a benchmark catalyst and we believe that with catalysts that perform better than Pt, such 3D pinecone structures can be useful for a variety of catalytic or photoelectrochemical reactions.

Flexible, Elastic, and Superhydrophobic/Superoleophilic Adhesive for Reusable and Durable Water/Oil Separation Coating

This study investigates a highly flexible/stretchable and mechanically durable superhydrophobic/superoleophilic coating for efficient oil/water separation and oil absorption. The coating is applied via a simple immersion process using a mixed solution of a biocompatible adhesive (ethyl cyanoacrylate, ECA), a highly stretchable polymer (polycaprolactone, PCL), and superhydrophobic/superoleophilic nanoparticles (fluorine-coated silica nanoparticles, F-SiO₂ NPs) in a solvent, followed by solvent evaporation and ECA polymerization. Polymerized ECA (poly-ECA) in the coating material strongly adheres the F-SiO₂ NPs to the substrate surface, while PCL bestows the rigid poly-ECA with high flexibility. A coated polyurethane sponge exhibits superhydrophobicity (water contact angle of >150°), while retaining robust mechanical stability and flexibility/elasticity. This provides an efficient means of cleaning oil spills with high selectivity, even after mechanical abrasion (>99% separation efficiency is retained after 120 tape test cycles and 50 rubbing test cycles), with excellent reusability.

A Self-Charging Supercapacitor for a Patch-Type Glucose Sensor

Wearable electronic medical devices measuring continuous biological signals for early disease diagnosis should be small and lightweight for consecutive usability. As a result, there has been an increasing need for new energy supply systems that provide continuous power without any interruption to the operation of the medical devices associated with the use of conventional batteries. In this work, we developed a patch-type self-charging supercapacitor that can measure biological signals with a continuous energy supply without batteries. The glucose oxidase coated on the surface of the microneedle-type glucose sensor encounters glucose in the interstitial fluids of the human body. Electrons created by glucose oxidation operate the self-powered system in which charging begins with the generation of potential differences in supercapacitor electrodes. In an 11 mM glucose solution, the self-powered solid-state supercapacitors (SPSCs) showed a power density of 0.62 mW/cm², which resulted in self-charging of the supercapacitor. The power density produced by each SPSC with a drop of 11 mM glucose solution was higher than that produced by glucose-based biofuel cells. Consequently, the all-in-one self-powered glucose sensor, with the aid of an Arduino Uno board and appropriate programming, effectively distinguished normal, prediabetic, and diabetic levels from 0.5 mL of solutions absorbed in a laboratory skin model.

Flexible and Stretchable Enzymatic Biofuel Cell with High Performance Enabled by Textile Electrodes and Polymer Hydrogel Electrolyte

Biofuel cells with good biocompatibility are promising to be used as the power source for flexible and wearable bioelectronics. We here report a type of highly flexible and stretchable biofuel cells, which are enabled by textile electrodes of graphene/carbon nanotubes (G/CNTs) composite and polymer hydrogel electrolyte. The CNT array covalently grown from a graphene layer not only can be served as a conducting substrate to immobilize enzyme molecules but also can provide efficient charge transport channels between the enzyme and graphene electrode. As a result, the developed biofuel cells deliver a high open-circuit voltage of 0.65 V and output power density of 64.2 μW cm^-2, which are much higher than previously reported results. Benefiting from the unique textile structure of electrodes and the polymer hydrogel electrolyte, the biofuel cells exhibit high retention of power density after 400 bending cycles and even stretched to a high strain of 60%.

Applications of Nanotechnology in Smart Textile Industry: A Critical Review

•

Current trends of using nanotechnology in textile industries.

•

Nanotechnology-driven techniques for fabrication and modification of textile fibers.

•

Wearable nanotechnology for energy storage, sensing, drug release, optics, electronics and photonics.

•

Environmental concerns associated with nanotechnology processed textiles.

Background

In recent years, nanotechnology has been playing an important role in designing smart fabrics. Nanomaterials have been employed to introduce in a sustainable manner, antimicrobial, ultraviolet resistant, electrically conductive, optical, hydrophobic and flame-retardant properties into textiles and garments. Nanomaterial based smart devices are now also being integrated with the textiles so as to perform various functions such as energy harvesting and storage, sensing, drug release and optics. These advancements have found wide applications in the fashion industry and are being developed for wider use in defence, healthcare and on-body energy harnessing applications.

Aim of review

The objective of this work is to provide an insight into the current trends of using nanotechnology in the modern textile industries and to inspire and anticipate further research in this field. This review provides an overview of the most current advances concerning on-body electronics research and the wonders which could be realized by nanomaterials in modern textiles in terms of total energy reliance on our clothes.

Key scientific concepts of review

The work underlines the various methods and techniques for the functionalization of nanomaterials and their integration into textiles with an emphasis on cost-effectiveness, comfort, wearability, energy conversion efficiency and eco-sustainability. The most recent trends of developing various nanogenerators, supercapacitors and photoelectronic devices on the fabric are highlighted, with special emphasis on the efficiency and wearability of the textile. The potential nanotoxicity associated with the processed textiles due to the tendency of these nanomaterials to leach into the environment along with possible remediation measures are also discussed. Finally, the future outlook regarding progress in the integration of smart nano-devices on textile fabrics is provided.

A review: Evolution of enzymatic biofuel cells

Ever-growing demands for energy, the unsustainability of fossil fuel due to its scarcity and massive impact on global economies and the environment, have encouraged the research on alternative power sources to work upon for the governments, companies, and scientists across the world. Enzymatic biofuel cells (eBFCs) is one category of fuel cell that can harvest energy from biological moieties and has the future to be used as an alternative source of energy. The aim of this review is to summarize the background and state-of-the-art in the field of eBFCs. This review article will be very beneficial for a wide audience including students and new researchers in the field. A part of the paper summarized the challenges in the preparation of anode and cathode and the involvement of nanomaterials and conducting polymers to construct the effective bioelectrodes. It will provide an insight for the researchers working in this challenging field. Furthermore, various applications of eBFCs in implantable power devices, tiny electronic gadgets, and self powered biosensors are reported. This review article explains the development in the area of eBFCs for several years from its origin to growth systematically. It reveals the strategies that have been taken for the improvements required for the better electrochemical performance and operational stability of eBFCs. It also mentions the challenges in this field that will require proper attention so that the eBFCs can be utilized commercially in the future. The review article is written and structurized in a way so that it can provide a decent background of eBFCs to its reader. It will definitely help in enhancing the interest of reader in eBFCs.

Current Trends and Future Prospects of Nanotechnology in Biofuel Production

Biofuel is one of the best alternatives to petroleum-derived fuels globally especially in the current scenario, where fossil fuels are continuously depleting. Fossil-based fuels cause severe threats to the environment and human health by releasing greenhouse gases on their burning. With the several limitations in currently available technologies and associated higher expenses, producing biofuels on an industrial scale is a time-consuming operation. Moreover, processes adopted for the conversion of various feedstock to the desired product are different depending upon the various techniques and materials utilized. Nanoparticles (NPs) are one of the best solutions to the current challenges on utilization of biomass in terms of their selectivity, energy efficiency, and time management, with reduced cost involvement. Many of these methods have recently been adopted, and several NPs such as metal, magnetic, and metal oxide are now being used in enhancement of biofuel production. The unique properties of NPs, such as their design, stability, greater surface area to volume ratio, catalytic activity, and reusability, make them effective biofuel additives. In addition, nanomaterials such as carbon nanotubes, carbon nanofibers, and nanosheets have been found to be cost effective as well as stable catalysts for enzyme immobilization, thus improving biofuel synthesis. The current study gives a comprehensive overview of the use of various nanomaterials in biofuel production, as well as the major challenges and future opportunities.

Energy Autonomous Sweat-Based Wearable Systems

The continuous operation of wearable electronics demands reliable sources of energy, currently met through Li-ion batteries and various energy harvesters. These solutions are being used out of necessity despite potential safety issues and unsustainable environmental impact. Safe and sustainable energy sources can boost the use of wearables systems in diverse applications such as health monitoring, prosthetics, and sports. In this regard, sweat- and sweat-equivalent-based studies have attracted tremendous attention through the demonstration of energy-generating biofuel cells, promising power densities as high as 3.5 mW cm^-2 , storage using sweat-electrolyte-based supercapacitors with energy and power densities of 1.36 Wh kg^-1 and 329.70 W kg^-1 , respectively, and sweat-activated batteries with an impressive energy density of 67 Ah kg^-1 . A combination of these energy generating, and storage devices can lead to fully energy-autonomous wearables capable of providing sustainable power in the µW to mW range, which is sufficient to operate both sensing and communication devices. Here, a comprehensive review covering these advances, addressing future challenges and potential solutions related to fully energy-autonomous wearables is presented, with emphasis on sweat-based energy storage and energy generation elements along with sweat-based sensors as applications.

Engineering of Electron Affinity and Interfacial Charge Transfer of Graphene for Self-Powered Nonenzymatic Biosensor Applications

Facile electron transport and intimate electronic contact at the catalyst-electrode interface are critical for the ideal performance of electrochemical devices such as glucose biofuel cells and biosensors. Here, through a comprehensive experimental-theoretical exploration, we demonstrate that engineering of interfacial properties, including interfacial electron dynamics, electron affinity, electrode-catalyst-adsorbate electrical synergy, and electrocatalytically active surface area, can lead to highly efficient graphene-based electrochemical devices. We selected two closely related but electronically and surface chemically different functionalized graphene analogues-graphene acid (GA) and reduced graphene oxide (rGO)-as the model graphenic platforms. Our studies reveal that compared to rGO, GA is a superior bifunctional catalyst with high oxygen reduction reaction (an onset potential of 0.8 V) and good glucose oxidation activities. Spectroscopic and electrochemical analysis of GA and rGO indicated that the higher carboxylic acid content on GA increases its overall electron affinity and coupled with improved conductivity and band alignment, which leads to GA's better electrochemical performance. The formulation of a heterostructure between GA and samarium oxide (Sm₂O₃) nanoparticles led to augmented conductivity (lower charge-transfer resistance) and glucose binding affinity, resulting in a further enhanced glucose oxidation activity. The interdimensional Sm₂O₃/GA heterostructure, leveraging their enhanced glucose oxidation capacity, exhibited excellent nonenzymatic amperometric glucose sensing performance, with a detection limit of 107 nM and a sensitivity of 20.8 μA/μM. Further, a nonenzymatic, membrane-free glucose biofuel cell (with Sm₂O₃/GA heterostructure as anode and GA as biocathode) produced a power density of 3.2 μW·cm^-2 (in PBS spiked with 3 mM glucose), which can function as self-powered glucose sensors with 70 nM limit of detection. The study establishes the potential of interfacial engineering of GA to engage it as a highly tunable substrate for a broad range of electrochemical applications, especially in future self-powered biosensors.

Mini-Review: Recent Technologies of Electrode and System in the Enzymatic Biofuel Cell (EBFC)

Enzymatic biofuel cells (EBFCs) is one of the branches of fuel cells that can provide high potential for various applications. However, EBFC has challenges in improving the performance power output. Exploring electrode materials is one way to increase enzyme utilization and lead to a high conversion rate so that efficient enzyme loading on the electrode surface can function correctly. This paper briefly presents recent technologies developed to improve bio-catalytic properties, biocompatibility, biodegradability, implantability, and mechanical flexibility in EBFCs. Among the combinations of materials that can be studied and are interesting because of their properties, there are various nanoparticles, carbon-based materials, and conductive polymers; all three have the advantages of chemical stability and enhanced electron transfer. The methods to immobilize enzymes, and support and substrate issues are also covered in this paper. In addition, the EBFC system is also explored and developed as suitable for applications such as self-pumping and microfluidic EBFC.

A Layer-by-Layer Assembly Route to Electroplated Fibril-Based 3D Porous Current Collectors for Energy Storage Devices

Electrical conductivity, mechanical flexibility, and large electroactive surface areas are the most important factors in determining the performance of various flexible electrodes in energy storage devices. Herein, a layer-by-layer (LbL) assembly-induced metal electrodeposition approach is introduced to prepare a variety of highly porous 3D-current collectors with high flexibility, metallic conductivity, and large surface area. In this study, a few metal nanoparticle (NP) layers are LbL-assembled onto insulating paper for the preparation of conductive paper. Subsequent Ni electroplating of the metal NP-coated substrates reduces the sheet resistance from ≈10³ to <0.1 Ω sq^-1 while maintaining the porous structure of the pristine paper. Particularly, this approach is completely compatible with commercial electroplating processes, and thus can be directly extended to electroplating applications using a variety of other metals in addition to Ni. After depositing high-energy MnO NPs onto Ni-electroplated papers, the areal capacitance increases from 68 to 811 mF cm^-2 as the mass loading of MnO NPs increases from 0.16 to 4.31 mg cm^-2 . When metal NPs are periodically LbL-assembled with the MnO NPs, the areal capacitance increases to 1710 mF cm^-2 .

Functional Fibers and Fabrics for Soft Robotics, Wearables, and Human-Robot Interface

Soft robotics inspired by the movement of living organisms, with excellent adaptability and accuracy for accomplishing tasks, are highly desirable for efficient operations and safe interactions with human. With the emerging wearable electronics, higher tactility and skin affinity are pursued for safe and user-friendly human-robot interactions. Fabrics interlocked by fibers perform traditional static functions such as warming, protection, and fashion. Recently, dynamic fibers and fabrics are favorable to deliver active stimulus responses such as sensing and actuating abilities for soft-robots and wearables. First, the responsive mechanisms of fiber/fabric actuators and their performances under various external stimuli are reviewed. Fiber/yarn-based artificial muscles for soft-robots manipulation and assistance in human motion are discussed, as well as smart clothes for improving human perception. Second, the geometric designs, fabrications, mechanisms, and functions of fibers/fabrics for sensing and energy harvesting from the human body and environments are summarized. Effective integration between the electronic components with garments, human skin, and living organisms is illustrated, presenting multifunctional platforms with self-powered potential for human-robot interactions and biomedicine. Lastly, the relationships between robotic/wearable fibers/fabrics and the external stimuli, together with the challenges and possible routes for revolutionizing the robotic fibers/fabrics and wearables in this new era are proposed.

Recent Advances in the Direct Electron Transfer-Enabled Enzymatic Fuel Cells

Direct electron transfer (DET), which requires no mediator to shuttle electrons from enzyme active site to the electrode surface, minimizes complexity caused by the mediator and can further enable miniaturization for biocompatible and implantable devices. However, because the redox cofactors are typically deeply embedded in the protein matrix of the enzymes, electrons generated from oxidation reaction cannot easily transfer to the electrode surface. In this review, methods to improve the DET rate for enhancement of enzymatic fuel cell performances are summarized, with a focus on the more recent works (past 10 years). Finally, progress on the application of DET-enabled EFC to some biomedical and implantable devices are reported.

Enzymatic Biofuel Cells: A Review on Flow Designs

Because of environmental concerns, there is a growing interest in new ways to produce green energy. Among the several studied applications, enzymatic biofuel cells can be considered as a promising solution to generate electricity from biological catalytic reactions. Indeed, enzymes show very good results as biocatalysts thanks to their excellent intrinsic properties, such as specificity toward substrate, high catalytic activity with low overvoltage for substrate conversion, mild operating conditions like ambient temperature and near-neutral pH. Furthermore, enzymes present low cost, renewability and biodegradability. The wide range of applications moves from miniaturized portable electronic equipment and sensors to integrated lab-on-chip power supplies, advanced in vivo diagnostic medical devices to wearable devices. Nevertheless, enzymatic biofuel cells show great concerns in terms of long-term stability and high power output nowadays, highlighting that this particular technology is still at early stage of development. The main aim of this review concerns the performance assessment of enzymatic biofuel cells based on flow designs, considered to be of great interest for powering biosensors and wearable devices. Different enzymatic flow cell designs are presented and analyzed highlighting the achieved performances in terms of power output and long-term stability and emphasizing new promising fabrication methods both for electrodes and cells.

Electrochemistry of Multilayer Electrodes: From the Basics to Energy Applications

Growing environmental concern has increased the demand for clean energy, and various technologies have been developed to utilize renewable energy sources. With the development of highly efficient energy conversion and storage systems, fundamental studies on the electrochemistry of electrodes are critical because the functionality of most of these systems relies on interfacial electrochemical reactions that occur on the surfaces of the electrodes. In this context, efficient electrode design methods are required to study specific electrochemical principles and the mechanisms of interfacial reactions on the surface of electrodes.Compared with other electrode fabrication methods, layer-by-layer (LbL) assembly is a simple, inexpensive, and versatile process for producing highly ordered multilayer thin-film electrodes from a diverse array of materials. LbL-assembled multilayer electrodes exhibit distinct electrochemical properties compared with electrodes created via other fabrication methods because of the nanoscale control of the composition and structures of electrodes afforded by LbL assembly. LbL assembly can generate unique nanoarchitectures from a multiplicity of electroactive components to investigate the detailed electrochemical mechanisms within the electrode, allowing for investigations of the internal-architecture-dependent electrochemical properties within the electrodes. As electrochemical LbL research has progressed over the last 10 years, our group has performed pioneering studies on the fundamental electrochemical properties of multilayer electrodes fabricated via LbL assembly for diverse energy applications. In this Account, we aim to outline the fundamental electrochemistry occurring at the nanoscale level on multilayer thin-film LbL electrodes using our work to illustrate these concepts, including the dependence of the electrochemistry on the thickness and architecture of multilayer electrodes, competition between mass and charge transfer, and control over the ion-permeation selectivity and interfacial dipole moments in multilayer electrodes. We anticipate that our approach to LbL-assembled electrodes will be of great interest and provide an attractive platform for the investigation of fundamental multilayer thin-film electrochemistry. We also believe that it will provide guidelines for research efforts toward future electrode engineering.

Nanoparticle-Based Electrodes with High Charge Transfer Efficiency through Ligand Exchange Layer-by-Layer Assembly

Organic-ligand-based solution processes of metal and transition metal oxide (TMO) nanoparticles (NPs) have been widely studied for the preparation of electrode materials with desired electrical and electrochemical properties for various energy devices. However, the ligands adsorbed on NPs have a significant effect on the intrinsic properties of materials, thus influencing the performance of bulk electrodes assembled by NPs for energy devices. To resolve these critical drawbacks, numerous approaches have focused on developing unique surface chemistry that can exchange bulky ligands with small ligands or remove bulky ligands from NPs after NP deposition. In particular, recent studies have reported that the ligand-exchange-induced layer-by-layer (LE-LbL) assembly of NPs enables controlled assembly of NPs with the desired interparticle distance, and interfaces, dramatically improving the electrical/electrochemical performance of electrodes. This emerging approach also demonstrates that efficient surface ligand engineering can exploit the unique electrochemical properties of individual NPs and maximize the electrochemical performance of the resultant NP-assembled electrodes through improved charge transfer efficiency. This report focuses on how LE-LbL assembly can be effectively applied to NP-based energy storage/conversion electrodes. First, the basic principles of the LE-LbL approach are introduced and then recent progress on NP-based energy electrodes prepared via the LE-LbL approach is reviewed.

Domiciliary Hospitalization through Wearable Biomonitoring Patches: Recent Advances, Technical Challenges, and the Relation to Covid-19

This article reviews recent advances and existing challenges for the application of wearable bioelectronics for patient monitoring and domiciliary hospitalization. More specifically, we focus on technical challenges and solutions for the implementation of wearable and conformal bioelectronics for long-term patient biomonitoring and discuss their application on the Internet of medical things (IoMT). We first discuss the general architecture of IoMT systems for domiciliary hospitalization and the three layers of the system, including the sensing, communication, and application layers. In regard to the sensing layer, we focus on current trends, recent advances, and challenges in the implementation of stretchable patches. This includes fabrication strategies and solutions for energy storage and energy harvesting, such as printed batteries and supercapacitors. As a case study, we discuss the application of IoMT for domiciliary hospitalization of COVID 19 patients. This can be used as a strategy to reduce the pressure on the healthcare system, as it allows continuous patient monitoring and reduced physical presence in the hospital, and at the same time enables the collection of large data for posterior analysis. Finally, based on the previous works in the field, we recommend a conceptual IoMT design for wearable monitoring of COVID 19 patients.

Interfacial control and design of conductive nanomaterials for transparent nanocomposite electrodes

A few critical issues in preparing transparent conductive electrodes (TCEs) based on solution-processable conductive nanomaterials are their low electrical conductivity and the unfavorable trade-off between electrical conductivity and optical transparency, which are closely related to the organic ligands bound to the nanomaterial surface. In particular, bulky/insulating organic ligands bound to the surface of conductive nanomaterials unavoidably act as high contact resistance sites at the interfaces between neighboring nanomaterials, which adversely affects the charge transfer kinetics of the resultant TCEs. This article reviews the latest research status of various interfacial control approaches for solution-processable TCEs. We describe how these approaches can be effectively applied to conductive nanomaterials and how interface-controlled conductive nanomaterials can be employed to improve the electrical and/or electrochemical performance of various transparent nanocomposite electrodes, including TCEs, energy storage electrodes, and electrochromic electrodes. Last, we provide perspectives on the development direction for next-generation transparent nanocomposite electrodes and breakthroughs for significantly mitigating the complex trade-off between their electrical/electrochemical performance and optical transparency.

The effect of reaction layer composition on Pt/NiO function for glucose oxidation reaction in neutral media

This study shows the application of carbon supported electrodes containing Pt/NiO nanoparticles to catalyze the electrochemical oxidation of glucose in neutral media. In particular, this study describes the effect of the Pt content and type of carbon (carbon black, expanded graphite, or charcoal active) in the reaction layer on this oxidation process in neutral media. Pt/NiO nanoparticles were synthesized by a simple hydrothermal method, and further characterized by scanning electron microscopy (SEM), X-ray diffraction spectroscopy (XRD), and cyclic voltammetry. These nanoparticles were used to modify carbon electrodes. The effectiveness of these electrodes for electrochemical glucose oxidation was evaluated. The results revealed that the catalytic activity of the electrodes depends on the content of Pt/NiO nanoparticles and the type of carbon. The 10% Pt/NiO with 90% loading (use of activated charcoal in the reaction layer) as optimum electrode indicated good stability after 1200 voltammetry cycles. This modified electrode was highly active for glucose oxidation in neutral media, which could be attributed to the presence of Pt/NiO nanoparticles as catalyst and high surface area of activated charcoal on the electrode surface.

Autonomous Energy Harvester Based on Textile-Based Enzymatic Biofuel Cell for On-Demand Usage

This paper presents an autonomous energy harvester based on a textile-based enzymatic biofuel cell, enabling an efficient power management and on-demand usage. The proposed biofuel cell works by an enzymatic reaction with glucose in sweat absorbed by the specially designed textile for sustainable and efficient energy harvesting. The output power of the textile-based biofuel cell has been optimized by changing electrode size and stacking electrodes and corresponding fluidic channels suitable for following power management circuit. The output power level of single electrode is estimated less than 0.5 μW and thus a two-staged power management circuit using intermediate supercapacitor has been presented. As a solution to produce a higher power level, multiple stacks of biofuel cell electrodes have been proposed and thus the textile-based biofuel cell employing serially connected 5 stacks produces a maximal power of 13 μW with an output voltage of 0.88 V when load resistance is 40 kΩ. A buck-boost converter employing a crystal oscillator directly triggered by DC output voltage of the biofuel cell makes it possible to obtain output voltage of the DC-DC converter is 6.75 V. The efficiency of the DC-DC converter is estimated as approximately 50% when the output power of the biofuel cell is tens microwatts. In addition, LT-spice modeling and simulation has been presented to estimate power consumption of each element of the proposed DC-DC converter circuit and the predicted output voltage has good agreement with measurement result.

Nanoarchitectonics beyond Self-Assembly: Challenges to Create Bio-Like Hierarchic Organization

Incorporation of non-equilibrium actions in the sequence of self-assembly processes would be an effective means to establish bio-like high functionality hierarchical assemblies. As a novel methodology beyond self-assembly, nanoarchitectonics, which has as its aim the fabrication of functional materials systems from nanoscopic units through the methodological fusion of nanotechnology with other scientific disciplines including organic synthesis, supramolecular chemistry, microfabrication, and bio-process, has been applied to this strategy. The application of non-equilibrium factors to conventional self-assembly processes is discussed on the basis of examples of directed assembly, Langmuir-Blodgett assembly, and layer-by-layer assembly. In particular, examples of the fabrication of hierarchical functional structures using bio-active components such as proteins or by the combination of bio-components and two-dimensional nanomaterials, are described. Methodologies described in this review article highlight possible approaches using the nanoarchitectonics concept beyond self-assembly for creation of bio-like higher functionalities and hierarchical structural organization.

Recent Advances in Hybrid Biomimetic Polymer-Based Films: from Assembly to Applications

Biological membranes, in addition to being a cell boundary, can host a variety of proteins that are involved in different biological functions, including selective nutrient transport, signal transduction, inter- and intra-cellular communication, and cell-cell recognition. Due to their extreme complexity, there has been an increasing interest in developing model membrane systems of controlled properties based on combinations of polymers and different biomacromolecules, i.e., polymer-based hybrid films. In this review, we have highlighted recent advances in the development and applications of hybrid biomimetic planar systems based on different polymeric species. We have focused in particular on hybrid films based on (i) polyelectrolytes, (ii) polymer brushes, as well as (iii) tethers and cushions formed from synthetic polymers, and (iv) block copolymers and their combinations with biomacromolecules, such as lipids, proteins, enzymes, biopolymers, and chosen nanoparticles. In this respect, multiple approaches to the synthesis, characterization, and processing of such hybrid films have been presented. The review has further exemplified their bioengineering, biomedical, and environmental applications, in dependence on the composition and properties of the respective hybrids. We believed that this comprehensive review would be of interest to both the specialists in the field of biomimicry as well as persons entering the field.