Autonomous helical propagation of active toroids with mechanical action

Evolution of Supramolecular Coordination Assemblies Visually Monitored by Time-Dependent Multicolor Fluorescence

Supramolecular coordination assemblies play an important role in both material science and biological systems. Despite significant efforts in their development, most existing examples are thermodynamically controlled, which lack the adaptability and autonomy essential for the creation of advanced materials. In this work, we have developed non-equilibrium coordination assembly systems that can evolve over time through a combination of thermodynamic and kinetic controls. The introduction of zinc ions resulted in the formation of metastable fiber assemblies in a kinetically trapped state, which autonomously converted to thermodynamically stable nanosheets over time. This evolution process can be regulated by external stimuli and visually monitored by the time-dependent multicolor fluorescence. The construction strategy was versatile across other various ions such as Ca2+, Mg2+, and Al3+, offering inspiring insights for the design of complex systems that operated both in and out of their thermodynamic equilibrium.

Heterochiral π-Stacking Dimerization of Helical Secondary Structures with Emerging Supramolecular Chirality

A specific interface mode type was observed between helical secondary structures, in which a left-handed (M) helix binds specifically to a right-handed (P) helix along the helical axis, leading to the formation of discrete heterochiral helical dimers. Moreover, a concealed supramolecular chirality within the meso-supramolecular dimers was unexpectedly discovered by chiral induction, and was further underpinned by covalent meso-helix structures.

Heat-activated growth of metastable and length-defined DNA fibers expands traditional polymer assembly

Biopolymers such as nucleic acids and proteins exhibit dynamic backbone folding, wherein site-specific intramolecular interactions determine overall structure. Proteins then hierarchically assemble into supramolecular polymers such as microtubules, that are robust yet dynamic, constantly growing or shortening to adjust to cellular needs. The combination of dynamic, energy-driven folding and growth with structural stiffness and length control is difficult to achieve in synthetic polymer self-assembly. Here we show that highly charged, monodisperse DNA-oligomers assemble via seeded growth into length-controlled supramolecular fibers during heating; when the temperature is lowered, these metastable fibers slowly disassemble. Furthermore, the specific molecular structures of oligomers that promote fiber formation contradict the typical theory of block copolymer self-assembly. Efficient curling and packing of the oligomers - or 'curlamers' - determine morphology, rather than hydrophobic to hydrophilic ratio. Addition of a small molecule stabilises the DNA fibers, enabling temporal control of polymer lifetime and underscoring their potential use in nucleic-acid delivery, stimuli-responsive biomaterials, and soft robotics.

Helical Superstructures from the Hierarchical Self-Assembly of Coil-Coil Block Copolymer Guided by Side Chain Amyloid-β(17-19) LVF Peptide

The rational design of precisely controlled hierarchical chiral nanostructures from synthetic polymers garnered inspiration from sophisticated biological materials. Since chiral peptide motifs induce helix formation in macromolecules, herein we report the synthesis of a novel type of hybrid polymer consisting of a β-sheet forming a LVF [L = leucine, V = valine, and F = phenylalanine] tripeptide pendant polymethacrylate block and a poly[poly(ethylene glycol) methyl ether methacrylate] (PPEGMA) block. The designed block copolymer self-organized into helical superstructures with a left-handed twisting sense, as visualized by field emission scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. This intriguing hierarchical self-assembly is driven by the minimalistic peptide motif that itself has a high propensity to adopt an antiparallel β-sheet conformation. We also report the generation of a diverse array of nanostructures, including spherical micelles, spindle micelles, rod-like micelles, vesicles, helical supramolecular fibers, and helical toroids via self-assembly of the designed block copolymer in tetrahydrofuran/water mixed solvents. To realize the observable helical superstructure, a twisted two-dimensional core-shell tape is proposed as a structure model in which the peptide segments form an antiparallel β-sheet with a polymer shell. The findings contribute to the advancement of a helical polymer or the superhelical self-assembly of polymers, paving the way for diverse applications in materials science and related fields.

Nanoscale polymer discs, toroids and platelets: a survey of their syntheses and potential applications

Polymer self-assembly has become a reliable and versatile workhorse to produce polymeric nanomaterials. With appropriate polymer design and monomer selection, polymers can assemble into shapes and morphologies beyond well-studied spherical and cylindrical micellar structures. Steadfast access to anisotropic polymer nanoparticles has meant that the fabrication and application of 2D soft matter has received increasing attention in recent years. In this review, we focus on nanoscale polymer discs, toroids, and platelets: three morphologies that are often interrelated and made from similar starting materials or common intermediates. For each morphology, we illustrate design rules, and group and discuss commonly used self-assembly strategies. We further highlight polymer compositions, fundamental principles and self-assembly conditions that enable precision in bottom-up fabrication strategies. Finally, we summarise potential applications of such nanomaterials, especially in the context of biomedical research and template chemistry and elaborate on future endeavours in this space.

Supramolecular assembly of dendronized spiropyrans in aqueous solutions into nanospheres with photo- and thermo-responsive chiralities

Tailoring the amphiphilicity of a molecule through external stimuli can alter the balance between self-association and repulsion, resulting in different propensities for its assembly. Here we report on the supramolecular assembly of a series of dendronized spiropyrans (DSPs) in water. These DSPs carry 3-fold dendritic oligoethylene glycols (OEGs) with either methoxyl or ethoxyl terminals for different hydrophilicities, and contain an Ala-Gly dipeptide to provide the chirality. These dendronized amphiphiles form supramolecular nanospheres in aqueous solutions with remarkable induced chirality to a level of 1.0 × 106 deg cm2 dmol-1. They can be tuned reversibly through photoisomerization of the spiropyran moieties from the hydrophobic SP form into the hydrophilic MC form, and can even become chirally silent through thermally mediated collapse of the dendritic OEGs. Photoisomerization of the spiropyran moieties in these DSPs is accompanied by simultaneous changes of UV absorption, fluorescence emission, supramolecular chirality and aqueous solution colors. These supramolecular nanospheres exhibit characteristic thermoresponsive behavior due to thermal collapse of the dendritic OEGs with their cloud point temperatures (Tcps) being dependent on the overall hydrophilicity of the molecules and also the aggregate morphologies resulting from how dendritic OEGs are wrapped around the aggregates. Both photo-irradiation-mediated isomerization of the spiropyran moieties and thermally mediated dehydration and collapse of the dendritic OEGs influence the amphiphilicity of these DSPs and their solvation by water, leading to varied driving forces for their assembly. NMR, circular dichroism (CD) and fluorescence spectroscopy techniques, as well as DLS and AFM techniques are combined to follow the supramolecular assembly and illustrate the aggregation mechanism. All experimental results demonstrate that the reversible chirality of the aggregates originates from the balance between dendritic OEGs and spiropyran moieties against water solvation.

Supramolecular Polymer Polymorphism: Spontaneous Helix-Helicoid Transition through Dislocation of Hydrogen-Bonded π-Rosettes

Polymorphism, a phenomenon whereby disparate self-assembled products can be formed from identical molecules, has incited interest in the field of supramolecular polymers. Conventionally, the monomers that constitute supramolecular polymers are engineered to facilitate one-dimensional aggregation and, consequently, their polymorphism surfaces primarily when the states of assembly differ significantly. This engenders polymorphs of divergent dimensionalities such as one- and two-dimensional aggregates. Notwithstanding, realizing supramolecular polymer polymorphism, wherein polymorphs maintain one-dimensional aggregation, persists as a daunting challenge. In this work, we expound upon the manifestation of two supramolecular polymer polymorphs formed from a large discotic supramolecular monomer (rosette), which consists of six hydrogen-bonded molecules with an extended π-conjugated core. These polymorphs are generated in mixtures of chloroform and methylcyclohexane, attributable to distinctly different disc stacking arrangements. The face-to-face (minimal displacement) and offset (large displacement) stacking arrangements can be predicated on their distinctive photophysical properties. The face-to-face stacking results in a twisted helix structure. Conversely, the offset stacking induces inherent curvature in the supramolecular fiber, thereby culminating in a hollow helical coil (helicoid). While both polymorphs exhibit bistability in nonpolar solvent compositions, the face-to-face stacking attains stability purely in a kinetic sense within a polar solvent composition and undergoes conversion into offset stacking through a dislocation of stacked rosettes. This occurs without the dissociation and nucleation of monomers, leading to unprecedented helicoidal folding of supramolecular polymers. Our findings augment our understanding of supramolecular polymer polymorphism, but they also highlight a distinctive method for achieving helicoidal folding in supramolecular polymers.

Design and Synthesis of New Type of Macrocyclic Architectures Used for Optoelectronic Materials and Supramolecular Chemistry

Supramolecular chemistry has received much attention for decades. Macrocyclic architectures as representative receptors play a vital role in supramolecular chemistry and are applied in many fields such as supramolecular assembly and host-guest recognition. However, the classical macrocycles generally lack functional groups in the scaffolds, which limit their further applications, especially in optoelectronic materials. Therefore, developing a new design principle is not only essential to better understand macrocyclic chemistry and the supramolecular behaviors, but also further expand their applications in many research fields. In recent years, the doping compounds with main-group heteroatoms (B, N, S, O, P) into the carbon-based π-conjugated macrocycles offered a new strategy to build macrocyclic architectures with unique optoelectronic properties. In particular, the energy gaps and redox behavior can be effectively tuned by incorporating heteroatoms into the macrocyclic scaffolds. In this Minireview, we briefly summarize the design and synthesis of new macrocycles, and further discuss the related applications in optoelectronic materials and supramolecular chemistry.

Dendrimer-conjugated isotretinoin for controlled transdermal drug delivery

BACKGROUND

In the present study, we aimed to develop a novel isotretinoin delivery model for treating skin diseases, revealing its potential advantages in drug delivery and targeted therapy. Using a self-assembly strategy, we grafted a dendrimer, based on a well-defined branched structure for nanomedical devices, with a well-defined nanoarchitecture, yielding spherical, highly homogeneous molecules with multiple surface functionalities. Accordingly, a self-assembled dendrimer-conjugated system was developed to achieve the transdermal delivery of isotretinoin (13cRA-D).

RESULTS

Herein, 13cRA-D showed remarkable controlled release, characterized by slow release in normal tissues but accelerated release in tissues with low pH, such as sites of inflammation. These release characteristics could abrogate the nonteratogenic side effects of isotretinoin and allow efficient skin permeation. Moreover, 13cRA-D exhibited high therapeutic efficacy in acne models. Based on in vitro and in vivo experimental results, 13cRA-D afforded better skin penetration than isotretinoin and allowed lesion targeting. Additionally, 13cRA-D induced minimal skin irritation.

CONCLUSION

Our findings suggest that 13cRA-D is a safe and effective isotretinoin formulation for treating patients with skin disorders.

1D Supramolecular Assemblies That Crystallize and Form Gels in Response to the Shape-Complementarity of Alcohols

N-9-Fluorenylmethyloxycarbonyl (Fmoc)- and C-tertiary butyl (t-Bu)-protected glutamate (L-2), bearing a phenanthroline moiety at the side residue, forms 1D supramolecular assemblies via H-bonding as well as undergoing π-stacking interactions to afford crystals or gels that depend on the shape-complementarity of coexisting alcohols, as demonstrated by structural analyses on these assemblies by means of single-crystal X-ray diffractometry and supplemented with small- and wide-angle X-ray scattering data. Moreover, the rheological measurements on the gels help to define a model for when gels and crystals are expected and found. These observations and conclusions highlight an important, but not very appreciated, aspect of solute-solvent interactions within supramolecular assemblies that can allow the constituent-aggregating molecules in some systems to exhibit high selectivity toward the structures of their solvents. The consequences of this selectivity, as demonstrated here by single-crystal and powder X-ray diffraction data, can lead to self-assembled structures which alter completely the bulk phase properties and morphology of the materials. In that regard, rheological measurements have helped to develop a model to explain when gels and phase-separated mixtures of crystals and solvents are expected.

Pathway-Controlled Aqueous Supramolecular Polymerization via Solvent-Dependent Chain Conformation Effects

Solute-solvent interactions play a critical role in multiple fields, including biology, materials science, and (physical) organic, polymer, and supramolecular chemistry. Within the growing field of supramolecular polymer science, these interactions have been recognized as an important driving force for (entropically driven) intermolecular association, particularly in aqueous media. However, to date, solute-solvent effects remain poorly understood in the context of complex self-assembly energy landscapes and pathway complexity. Herein, we unravel the role of solute-solvent interactions in controlling chain conformation effects, allowing energy landscape modulation and pathway selection in aqueous supramolecular polymerization. To this end, we have designed a series of oligo(phenylene ethynylene) (OPE)-based bolaamphiphilic Pt(II) complexes OPE2-4 bearing solubilizing triethylene glycol (TEG) chains of equal length on both molecule ends, but a different size of the hydrophobic aromatic scaffold. Strikingly, detailed self-assembly studies in aqueous media disclose a different tendency of the TEG chains to fold back and enwrap the hydrophobic molecular component depending on both the size of the core and the volume fraction of the co-solvent (THF). The relatively small hydrophobic component of OPE2 can be readily shielded by the TEG chains, leading to only one aggregation pathway. In contrast, the decreased capability of the TEG chains to effectively shield larger hydrophobic cores (OPE3 and OPE4) enables different types of solvent quality-dependent conformations (extended, partly back-folded and back-folded), which in turn induce various controllable aggregation pathways with distinct morphologies and mechanisms. Our results shed light on previously underappreciated solvent-dependent chain conformation effects and their role in governing pathway complexity in aqueous media.

Photoresponsive reversible self-assembly of rod-coil amphiphiles containing spiropyran groups

Stimuli-responsive assembly deformation is a key feature in constructing smart soft materials, which makes them versatile and autonomous. In this study, rod-coil amphiphilic compounds containing spiropyran (SP) groups were developed and synthesized to investigate their stimuli-responsive assembly in a solution system with 99% water content. In addition to photochromic phenomena, reversible light-mediated morphological alterations occurred in these molecular aggregates. Based on the different flexible chain segments of rod-coil amphiphiles, the initial assemblies underwent a dissociation-reassembly process under ultraviolet (UV) irradiation, whereupon they deformed or disassembled to assemblies. Furthermore, as the UV source was removed, the original nanostructures were gradually recovered again via the ring-closing reaction process. These compounds, interestingly, can selectively combine with copper ions to produce cross-linked co-assembled nanostructures. The copper ion complex solution of rod-coil amphiphilic compounds emitted unique bright blue fluorescence, which allowed for the specific visual identification of copper ions in aqueous solutions.

Fine-tuning of the size of supramolecular nanotoroids suppresses the subsequent catenation of nano-[2]catenane

The reduction in the inner diameter of the nanotoroids of a π-conjugated barbiturate monomer results in nano-[2]catenanes in a high yield due to enhanced secondary nucleation and subsequent steric suppression of further catenation.

Engineering biomolecular systems: Controlling the self-assembly of gelatin to form ultra-small bioactive nanomaterials

The size of nanocarriers determines the biological property of the materials, especially as it relates to intratumoral distribution. Previous research has shown that sizes of 10-50 nm penetrate deep inside the tumor, resulting in better efficacy. On the other hand, studies have shown that gelatin exhibits excellent biological properties, including compatibility, degradability, and toxicity. Therefore, FDA approved gelatin as a safe material to use as an excipient in injectables. The bottleneck is the nonexistence of smaller-sized gelatin nanoparticles (GNPs) to realize the full potential of these biomaterials. Yet, GNPs with sizes of less than 50 nm have not been reported; the synthetic strategy reported in the literature uses "uncontrolled crosslinking coupled with nanoprecipitation", resulting in larger particle size. We have developed a new method to self-assemble gelatin strands by using an anionic, phosphate-based crosslinker and controlled precipitation. The method we developed produced ultra-small gelatin nanoparticles (GX) of size 10 nm with a high degree of reproducibility, and it was characterized using dynamic light scattering (DLS), Energy-dispersive X-ray spectroscopy (EDS), High-resolution transmission, and scanning electron microscopy (HR-TEM/STEM). We also explored GX as a bioactive platform to encapsulate imaging and therapy agents within the cavity. Interestingly, we were able to encapsulate 2 nm size gold nanoparticles within the void of GX. The versatile nature of the GX particles was further demonstrated by surface functionalizing with larger size gelatin nanoparticles to form core-satellite nanocomposites. Additionally, we studied the tumor penetrability of dye-tagged 10, 50, and 200 nm gelatin nanoparticles. The study showed that smaller size gelatin nanoparticles penetrate deeper tumor regions than larger particles. In general, GX was efficient in penetrating the inner region of the spheroids. The results demonstrate the potential capabilities of ultra-small GX nanoparticles for multi-staged payload delivery, diagnostics, and cancer therapy.

One-Dimensional Helical Nanostructures from the Hierarchical Self-Assembly of an Achiral "Rod-Coil" Alternating Copolymer

The self-assembly of alternating copolymers (ACPs) has attracted considerable interest due to their unique alternating nature. However, compared with block copolymers, their self-assembly behavior has remained much less explored and their reported self-assembled structures are limited. Here, we report the formation of supramolecular helical structures by the self-assembly of an achiral rod-coil alternating copolymer, poly(quarter(3-hexylthiophene)-alt-poly(ethylene glycol)) (P(Q3HT-alt-PEG)). The copolymer exhibited an interesting hierarchical self-assembly process, driven by the π-π stacking of the Q3HT segments and the solvophobic interaction of the alkyl chains in tetrahydrofuran (THF)-isopropanol (iPrOH) mixed solvents. The copolymer first self-assembled into thin nanobelts with a uniform size, then grew to helical nanoribbons and eventually twisted into helical nanowires with an average diameter of 25 ± 9 nm and a mean pitch of 80 ± 10 nm. Dissipative particle dynamics (DPD) simulation supported the formation course of the helical nanowires. Furthermore, the addition of (S)-ethyl lactate and (R)-ethyl lactate in the self-assembly of P(Q3HT-alt-PEG) resulted in the formation of left-handed and right-handed chiral nanowires, respectively, demonstrating the tunability of the chirality of the helical wires. This study expands the library of ordered self-assembled structures of ACPs, and also brings a new strategy and mechanism to construct helical supramolecular structures. This article is protected by copyright. All rights reserved.

Topological-skeleton controlled chirality expression of supramolecular hyperbranched and linear polymers

The topology of polymers plays an essential role in their chemical, physical and biological properties. However, their effects on chirality-related functions remain unclear. Here, we reported the topology-controlled chirality expression in the chiral supramolecular system for the first time. Two topological supramolecular polymers, hyperbranched (HP) and linear (LP) supramolecular polymers produced by the host-guest interactions of branched and linear monomers, respectively, exhibited completely different chirality expressions despite the same molecular chirality of their monomers. Significantly, due to the branch points and strong steric hindrance existing in HP, cis-HP showed an enhanced and sign-inverted Cotton effect in the n-π* bands compared with cis-LP, as a result that the distinctive chirality induction and transfer were controlled by the topological skeletons. This topology-controlled chirality induction and transfer in the photoswitchable supramolecular polymers not only enables us to elucidate the in-depth effects of topology on the chiral expression in biopolymers but also inspires the design of chiroptical and bioinspired materials.

Selective Anticancer Materials by Self-Assembly of Synthetic Amphiphiles Based on N-Acetylneuraminic Acid

N-Acetylneuraminic acid (Neu5Ac), one of the abundant types of sialic acid, is an emerging anticancer agent owing to its ability to target selectins in the plasma membrane of cancer cells. Considering the functionality of Neu5Ac, obtaining novel Neu5Ac-conjugated materials with a selective and an enhanced antitumor activity has remained a challenge. Herein, we report the supramolecular materials of three novel amphiphiles composed of Neu5Ac as a hydrophilic segment and pyrene or adamantane as a hydrophobic segment. The synthetic amphiphiles 1, 2, and 3 self-assembled into ribbons, vesicles, and irregular aggregates in an aqueous solution, respectively. Among the materials, vesicles of amphiphile 2 showed the most substantial selectivity toward cancer cells, followed by cell death due to the production of reactive oxygen species by the pyrene group. The dual advantage of Neu5Ac-selectivity and the pyrene-cytotoxicity of vesicles of amphiphile 2 can provide a strategy for effective anticancer materials.

Biasing the Hierarchy Motifs of Nanotoroids: from 1D Nanotubes to 2D Porous Networks

Hierarchical organization of self-assembled structures into superstructures is omnipresent in Nature but has been rarely achieved in synthetic molecular assembly due to the absence of clear structural rules. We herein report on the self-assembly of scissor-shaped azobenzene dyads which form discrete nanotoroids that further organize into 2D porous networks. The steric demand of the peripheral aliphatic units diminishes the trend of the azobenzene dyad to constitute stackable nanotoroids in solution, thus affording isolated (unstackable) nanotoroids upon cooling. Upon drying, these nanotoroids organize at graphite surface to form well-defined 2D porous networks. The photoirradiation with UV and visible light enabled reversible dissociation and reconstruction of nanotoroids through the efficient trans↔cis isomerization of azobenzene moieties in solution.

Hierarchical self-assembly into chiral nanostructures

One basic principle regulating self-assembly is associated with the asymmetry of constituent building blocks or packing models. Using asymmetry to manipulate molecular-level devices and hierarchical functional materials is a promising topic in materials sciences and supramolecular chemistry. Here, exemplified by recent major achievements in chiral hierarchical self-assembly, we show how chirality may be utilized in the design, construction and evolution of highly ordered and complex chiral nanostructures. We focus on how unique functions can be developed by the exploitation of chiral nanostructures instead of single basic units. Our perspective on the future prospects of chiral nanostructures via the hierarchical self-assembly strategy is also discussed.

Switchable Aromatic Nanopore Structures: Functions and Applications

Nanopore structures in nature play a crucial role in performing many sophisticated functions such as signal transduction, mass transport, ion channel, and enzyme reaction. Inspired by pore-forming proteins, considerable effort has been made to design self-assembling molecules that are able to form nanostructures with internal pores in aqueous media. These nanostructures offer ample opportunity for applications because their internal pores are able to perform a number of unique functions required for a confined nanospace. However, unlike nanopore assembly in nature, the synthetic nanopore structures are mostly based on a fixed pore that impedes performing adaptable regulation of properties to environmental change. This limitation can be overcome by integration of hydrophilic oligo(ethylene oxide) dendrons into aromatic building blocks for nanopore self-assembly, because the dendritic chains undergo large conformational changes triggered by environmental change. The transition of the oligoether chains triggers the aromatic nanopore assembly to undergo reversible pore deformation through closing, squeezing, and shape change without structural collapse. These switching properties allow the aromatic nanopore structures to perform adaptable, complex functions which are difficult to achieve using a fixed pore assembly.In this Account, we summarize our recent progress in the development of switchable nanopore structures by self-assembly of rigid aromatic amphiphiles grafted by hydrophilic oligo(ethylene oxide) dendrons in aqueous media. We show that combining oligoether chains into aromatic segments generates switchable aromatic nanopore structures in aqueous media such as hollow tubules, toroidal structures, and 2D porous sheets depending on the shape of the aromatic building block. Next, we discuss the chemical principle behind the switching motion of the aromatic nanopore structures triggered by external stimuli. We show that the internal pores of the aromatic nanostructures are able to undergo reversible switching between open-closed or expanded-contracted states triggered by external stimuli such as temperature, pH, and salts. In the case of toroidal structures, closed ring-like aromatic frameworks can be spirally open triggered by heat treatment, which spontaneously initiate helical polymerization. Additionally, we discuss switchable functions carried out by the aromatic nanopores such as driving helicity inversion of DNA, consecutive enzymatic action, reversible actuation of lipid vesicles, and pumping of captured guests out of internal pores. By understanding the underlying chemical principle required for dynamic mechanical motion, aromatic assembly can be exploited more broadly to create emergent nanopore structures with functions as complex as those of biological systems.

Influence of the Z/E Isomerism on the Pathway Complexity of a Squaramide-Based Macrocycle

The rising interest on pathway complexity in supramolecular polymerization has prompted the finding of novel monomer designs able to stabilize kinetically trapped species and generate supramolecular polymorphs. In the present work, the exploitation of the Z/E (geometrical) isomerism of squaramide (SQ) units to produce various self-assembled isoforms and complex supramolecular polymerization pathways in methylcyclohexane/CHCl₃ mixtures is reported for the first time. This is achieved by using a new bissquaramidic macrocycle (MSq) that self-assembles into two markedly different thermodynamic aggregates, AggA (discrete cyclic structures) and AggB (fibrillar structures), depending on the solvent composition and concentration. Remarkably, UV-vis, ¹ H NMR, and FT-IR experiments together with quantum-chemical calculations indicate that these two distinct aggregates are formed via two different hydrogen bonding patterns (side-to-side in AggA and head-to-tail in AggB) due to different conformations in the SQ units (Z,E in AggA and Z,Z in AggB). The ability of MSq to supramolecularly polymerize into two distinct aggregates is utilized to induce the kinetic-to-thermodynamic transformation from AggA to AggB, which occurs via an on-pathway mechanism. It is believed that this system provides new insights for the design of potential supramolecular polymorphic materials by using squaramide units.

Nanomechanical Properties of a Supramolecular Helix Stabilized by Non-Covalent Interactions

Supramolecular helices have unique properties and many potential applications, such as chiral separation and asymmetric catalysis. Mechanical property (stability) of the supramolecular helix plays important roles in their functions. Due to the limitation of detection method, it is quite challenging to investigate nanomechanical properties of individual supramolecular helices stabilized by pure supramolecular interactions. Here atomic force microscopy (AFM)-based single molecule force spectroscopy (SMFS) is used to study the nanomechanical properties of a thermal-responsive supramolecular helix. The unwinding force plateau is observed in the force-extension curve, and the rupture force of the helix is dependent on the loading rate. In addition, the force-induced unwinding process is reversible and there is almost no energy dissipation in the process. Furthermore, the result of thermal shape-fluctuation analysis shows that the persistence length of the supramolecular helix is about 222 nm, which is much larger than helical structure formed by double-stranded DNA (dsDNA). However, because of its unique backbone structure, the supramolecular helix exhibits higher dynamic flexibility during force-induced deformation, since the persistence length determined from the stretching experiment is much smaller (1.1 nm).

Tuning Aqueous Supramolecular Polymerization by an Acid-Responsive Conformational Switch

Besides their widespread use in coordination chemistry, 2,2'-bipyridines are known for their ability to undergo cis-trans conformational changes in response to metal ions and acids, which has been primarily investigated at the molecular level. However, the exploitation of such conformational switching in self-assembly has remained unexplored. In this work, the use of 2,2'-bipyridines as acid-responsive conformational switches to tune supramolecular polymerization processes has been demonstrated. To achieve this goal, we have designed a bipyridine-based linear bolaamphiphile, 1, that forms ordered supramolecular polymers in aqueous media through cooperative aromatic and hydrophobic interactions. Interestingly, addition of acid (TFA) induces the monoprotonation of the 2,2'-bipyridine moiety, leading to a switch in the molecular conformation from a linear (trans) to a V-shaped (cis) state. This increase in molecular distortion along with electrostatic repulsions of the positively charged bipyridine-H+ units attenuate the aggregation tendency and induce a transformation from long fibers to shorter thinner fibers. Our findings may contribute to opening up new directions in molecular switches and stimuli-responsive supramolecular materials.

Switching between Stacked Toroids and Helical Supramolecular Polymers in Aqueous Nanotubules

Although significant advances have been made in supramolecular tubules, reversible polymerization in the tubular walls while maintaining their intact structure remains a great challenge. Here, reversible helical supramolecular polymerization of stacked toroids is reported, while maintaining tubular structures in aqueous solution. At room temperature, the tubules consist of discrete toroid stackings with hydrophobic interior. Upon heating, the tubules based on toroid stackings undergo a reversible helical supramolecular polymerization to transform into helical tubules by interconnecting between spirally open toroids. The helical polymerization arises from a tilting transition of the closed toroids that transform into spirally open toroids driven by the thermal dehydration of a hydrophilic oligoether dendron surrounding the toroid frameworks.

Supramolecular copolymerization driven by integrative self-sorting of hydrogen-bonded rosettes

Molecular recognition to preorganize noncovalently polymerizable supramolecular complexes is a characteristic process of natural supramolecular polymers, and such recognition processes allow for dynamic self-alteration, yielding complex polymer systems with extraordinarily high efficiency in their targeted function. We herein show an example of such molecular recognition-controlled kinetic assembly/disassembly processes within artificial supramolecular polymer systems using six-membered hydrogen-bonded supramolecular complexes (rosettes). Electron-rich and poor monomers are prepared that kinetically coassemble through a temperature-controlled protocol into amorphous coaggregates comprising a diverse mixture of rosettes. Over days, the electrostatic interaction between two monomers induces an integrative self-sorting of rosettes. While the electron-rich monomer inherently forms toroidal homopolymers, the additional electrostatic interaction that can also guide rosette association allows helicoidal growth of supramolecular copolymers that are comprised of an alternating array of two monomers. Upon heating, the helicoidal copolymers undergo a catastrophic transition into amorphous coaggregates via entropy-driven randomization of the monomers in the rosette.

Unlike natural supramolecular polymers, artificial counterparts do not have molecular recognition processes to preorganize the supramolecular complexes before final assembly. Here, the authors show supramolecular copolymerization driven by integrative self-sorting of two different monomers into discrete six-membered supramolecular complexes (rosettes).

Reversible helical polymerization of supramolecular toroidal objects

Reversible helical polymerization of toroids with rapid response to heating–cooling cycles and helicity control in the presence of a chiral regulator.