Isolating contiguous Pt atoms and forming Pt-Zn intermetallic nanoparticles to regulate selectivity in 4-nitrophenylacetylene hydrogenation

Unveiling Atomic-Scaled Local Chemical Order of High-Entropy Intermetallic Catalyst for Alkyl-Substitution-Dependent Alkyne Semihydrogenation

High-entropy intermetallic (HEI) nanocrystals, composed of multiple elements with an ordered structure, are of immense interest in heterogeneous catalysis due to their unique geometric and electronic structures and the cocktail effect. Despite tremendous efforts dedicated to regulating the metal composition and structures with advanced synthetic methodologies to improve the performance, the surface structure, and local chemical order of HEI and their correlation with activity at the atomic level remain obscure yet challenging. Herein, by determining the three-dimensional (3D) atomic structure of quinary PdFeCoNiCu (PdM) HEI using atomic-resolution electron tomography, we reveal that the local chemical order of HEI regulates the surface electronic structures, which further mediates the alkyl-substitution-dependent alkyne semihydrogenation. The 3D structures of HEI PdM nanocrystals feature an ordered (intermetallic) core enclosed by a disordered (solid-solution) shell rather than an ordered surface. The lattice mismatch between the core and shell results in apparent near-surface distortion. The chemical order of the intermetallic core increases with annealing temperature, driving the electron redistribution between Pd and M at the surface, but the surface geometrical (chemically disordered) configurations and compositions are essentially unchanged. We investigate the catalytic performance of HEI PdM with different local chemical orders toward semihydrogenation across a broad range of alkynes, finding that the electron density of surface Pd and the hindrance effect of alkyl substitutions on alkynes are two key factors regulating selective semihydrogenation. We anticipate that these findings on surface atomic structure will clarify the controversy regarding the geometric and/or electronic effects of HEI catalysts and inspire future studies on tuning local chemical order and surface engineering toward enhanced catalysts.

Ambient hydrogenation of solid aromatics enabled by a high entropy alloy nanocatalyst

Hydrogenation is a versatile chemical process with significant applications in various industries, including food production, petrochemical refining, pharmaceuticals, and hydrogen carriers/safety. Traditional hydrogenation of aromatics, hindered by the stable π-conjugated phenyl ring structures, typically requires high temperatures and pressures, making ambient hydrogenation a grand challenge. Herein, we introduce a PdPtRuCuNi high entropy alloy (HEA) nanocatalyst, achieving an exceptional 100% hydrogenation of carbon-carbon unsaturated bonds, including alkynyl and phenyl groups, in solid 1,4-bis(phenylethynyl)benzene (DEB) at 25 °C under ≤1 bar H2 and solventless condition. This results in a threefold higher hydrogen uptake for DEB-contained composites compared to conventional Pd catalysts, which can only hydrogenate the alkynyl groups with a ~ 27% conversion of DEB. Our experimental results, complemented by theoretical calculations, reveal that PdPtRu alloy is highly active and crucial in enabling the hydrogenation of phenyl groups, while all five elements work synergistically to regulate the reaction rate. Remarkably, this newly developed catalyst also achieves nearly 100% reactivity for ambient hydrogenation of a broad range of aromatics, suggesting its universal effectiveness. Our research uncovers a novel material platform and catalyst design principle for efficient and general hydrogenation. The multi-element synergy in HEA also promises unique catalytic behaviors beyond hydrogenation applications.

Structure evolution and specific effects for the catalysis of atomically ordered intermetallic compounds

Atomically ordered intermetallic compounds (IMCs) have been extensively studied for exploring catalysts with high activity, selectivity, and longevity. Compared to random alloys, IMCs present a more pronounced geometric and electronic effect with desirable catalytic performance. Their well-defined structure makes IMCs ideal model catalysts for studying the catalytic mechanism. This review focuses especially on elemental composition, electron transfer, and structure/phase evolution under high temperature treatment conditions, providing direct evidence for the migration and rearrangement of metal atoms through electron microscopy. We then present the outstanding applications of IMCs in growing single-walled nanotubes, hydrogenation/dehydrogenation reactions, and electrocatalysis from the perspective of electronic, geometric, strain, and bifunctional effects of ordered IMCs. Finally, the current obstacles associated with the use of in situ techniques are proposed, as well as future research possibilities.

Alkali cation-induced cathodic corrosion in Cu electrocatalysts

The reconstruction of Cu catalysts during electrochemical reduction of CO2 is a widely known but poorly understood phenomenon. Herein, we examine the structural evolution of Cu nanocubes under CO2 reduction reaction and its relevant reaction conditions using identical location transmission electron microscopy, cyclic voltammetry, in situ X-ray absorption fine structure spectroscopy and ab initio molecular dynamics simulation. Our results suggest that Cu catalysts reconstruct via a hitherto unexplored yet critical pathway - alkali cation-induced cathodic corrosion, when the electrode potential is more negative than an onset value (e.g., -0.4 VRHE when using 0.1 M KHCO3). Having alkali cations in the electrolyte is critical for such a process. Consequently, Cu catalysts will inevitably undergo surface reconstructions during a typical process of CO2 reduction reaction, resulting in dynamic catalyst morphologies. While having these reconstructions does not necessarily preclude stable electrocatalytic reactions, they will indeed prohibit long-term selectivity and activity enhancement by controlling the morphology of Cu pre-catalysts. Alternatively, by operating Cu catalysts at less negative potentials in the CO electrochemical reduction, we show that Cu nanocubes can provide a much more stable selectivity advantage over spherical Cu nanoparticles.

Rational Design and Precise Synthesis of Single-Atom Alloy Catalysts for the Selective Hydrogenation of Nitroarenes

Single-atom alloys (SAAs) have gained increasing prominence in the field of selective hydrogenation reactions due to their uniform distribution of active sites and the unique host-guest metal interactions. Herein, 15 SAAs are constructed to comprehensively elucidate the relationship between host-guest metal interaction and catalytic performance in the selective hydrogenation of 4-nitrostyrene (4-NS) by density functional theory (DFT) calculations. The results demonstrate that the SAAs with strong host-guest metal interactions exhibit a preference for N─O bond cleavage, and the reaction energy barrier of the hydrogenation process is primarily influenced by the host metal. Among them, Ir1Ni SAA stands out as the prime catalyst candidate, showcasing exceptional activity and selectivity. Furthermore, the Ir1Ni SAA is subsequently prepared through precise synthesis techniques and evaluated in the selective hydrogenation of 4-NS to 4-aminostyrene (4-AS). As anticipated, the Ir1Ni SAA demonstrates extraordinary catalytic performance (yield > 96%). In situ FT-IR experiments and DFT calculations further confirmed that the unique host-guest metal interaction at the Ir-Ni interface site of Ir1Ni SAA endows it with excellent 4-NS selective hydrogenation ability. This work provides valuable insights into enhancing the performance of SAAs catalysts in selective hydrogenation reactions by modulating the host-guest metal interactions.

Metal bond strength regulation enables large-scale synthesis of intermetallic nanocrystals for practical fuel cells

Structurally ordered L10-PtM (M = Fe, Co, Ni and so on) intermetallic nanocrystals, benefiting from the chemically ordered structure and higher stability, are one of the best electrocatalysts used for fuel cells. However, their practical development is greatly plagued by the challenge that the high-temperature (>600 °C) annealing treatment necessary for realizing the ordered structure usually leads to severe particle sintering, morphology change and low ordering degree, which makes it very difficult for the gram-scale preparation of desirable PtM intermetallic nanocrystals with high Pt content for practical fuel cell applications. Here we report a new concept involving the low-melting-point-metal (M' = Sn, Ga, In)-induced bond strength weakening strategy to reduce Ea and promote the ordering process of PtM (M = Ni, Co, Fe, Cu and Zn) alloy catalysts for a higher ordering degree. We demonstrate that the introduction of M' can reduce the ordering temperature to extremely low temperatures (≤450 °C) and thus enable the preparation of high-Pt-content (≥40 wt%) L10-Pt-M-M' intermetallic nanocrystals as well as ten-gram-scale production. X-ray spectroscopy studies, in situ electron microscopy and theoretical calculations reveal the fundamental mechanism of the Sn-facilitated ordering process at low temperatures, which involves weakened bond strength and consequently reduced Ea via Sn doping, the formation and fast diffusion of low-coordinated surface free atoms, and subsequent L10 nucleation. The developed L10-Ga-PtNi/C catalysts display outstanding performance in H2-air fuel cells under both light- and heavy-duty vehicle conditions. Under the latter condition, the 40% L10-Pt50Ni35Ga15/C catalyst delivers a high current density of 1.67 A cm-2 at 0.7 V and retains 80% of the current density after extended 90,000 cycles, which exceeds the United States Department of Energy performance metrics and represents among the best cathodic electrocatalysts for practical proton-exchange membrane fuel cells.

Stabilizing Diluted Active Sites of Ultrasmall High-Entropy Intermetallics for Efficient Formic Acid Electrooxidation

The poisoning of undesired intermediates or impurities greatly hinders the catalytic performances of noble metal-based catalysts. Herein, high-entropy intermetallics i-(PtPdIrRu)2FeCu (HEI) are constructed to inhibit the strongly adsorbed carbon monoxide intermediates (CO*) during the formic acid oxidation reaction. As probed by multiple-scaled structural characterizations, HEI nanoparticles are featured with partially negative Pt oxidation states, diluted Pt/Pd/Ir/Ru atomic sites and ultrasmall average size less than 2 nm. Benefiting from the optimized structures, HEI nanoparticles deliver more than 10 times promotion in intrinsic activity than that of pure Pt, and well-enhanced mass activity/durability than that of ternary i-Pt2FeCu intermetallics counterpart. In situ infrared spectroscopy manifests that both bridge and top CO* are favored on pure Pt but limited on HEI. Further theoretical elaboration indicates that HEI displayed a much weaker binding of CO* on Pt sites and sluggish diffusion of CO* among different sites, in contrast to pure Pt that CO* bound more strongly and was easy to diffuse on larger Pt atomic ensembles. This work verifies that HEIs are promising catalysts via integrating the merits of intermetallics and high-entropy alloys.

Simultaneously Geometrical and Electronic Modulation of L10-PtZn by Trace Ge Boosts High-performance Oxygen Reduction Reaction

Developing a highly active, durable, and low-platinum-based electrocatalyst for the cathodic oxygen reduction reaction (ORR) is for breaking the bottleneck of large-scale applications of proton exchange membrane fuel cells (PEMFCs). Herein, ultrafine PtZn intermetallic nanoparticles with low Pt-loading and trace germanium (Ge) involvement confined in the nitrogen-doped porous carbon (Ge-L10-PtZn@N-C) are reported. The Ge-L10-PtZn@N-C exhibit superior ORR activity with a mass activity of 3.04 A mg-1 Pt and specific activity of 4.69 mA cm-2, ≈12.2- and 10.2-times improvement compared to the commercial Pt/C (20%) at 0.90 V in 0.1 m KOH. The cathodic catalyst Ge-L10-PtZn@N-C assembled in the PEMFC shows encouraging peak power densities of 316.5 (at 0.86 V) and 417.2 mW cm-2 (at 0.91 V) in alkaline and acidic fuel-cell, respectively. The combination of experiment and density functional theory calculations (DFT) results robustly reveal that the participation of trace Ge can not only trigger a "growth site locking effect" to effectively inhibit nanoparticle growth, bring miniature nanoparticles, enhance dispersion uniformity, and achieve the exposure of the more electrochemical active site, but also effectively modulates the electronic structure, hence optimizing the adsorption/desorption of the oxygen intermediates.

Why do Single-Atom Alloys Catalysts Outperform both Single-Atom Catalysts and Nanocatalysts on MXene?

Single-atom alloys (SAAs), combining the advantages of single-atom and nanoparticles (NPs), play an extremely significant role in the field of heterogeneous catalysis. Nevertheless, understanding the catalytic mechanism of SAAs in catalysis reactions remains a challenge compared with single atoms and NPs. Herein, ruthenium-nickel SAAs (RuNiSAAs ) synthesized by embedding atomically dispersed Ru in Ni NPs are anchored on two-dimensional Ti3 C2 Tx MXene. The RuNiSAA-3 -Ti3 C2 Tx catalysts exhibit unprecedented activity for hydrogen evolution from ammonia borane (AB, NH3 BH3 ) hydrolysis with a mass-specific activity (rmass ) value of 333 L min-1  gRu -1 . Theoretical calculations reveal that the anchoring of SAAs on Ti3 C2 Tx optimizes the dissociation of AB and H2 O as well as the binding ability of H* intermediates during AB hydrolysis due to the d-band structural modulation caused by the alloying effect and metal-supports interactions (MSI) compared with single atoms and NPs. This work provides useful design principles for developing and optimizing efficient hydrogen-related catalysts and demonstrates the advantages of SAAs over NPs and single atoms in energy catalysis.

Atomic Distance Engineering in Metal Catalysts to Regulate Catalytic Performance

It is very important to understand the structure-performance relationship of metal catalysts by adjusting the microstructure of catalysts at the atomic scale. The atomic distance has an essential influence on the composition of the environment of active metal atom, which is a key factor for the design of targeted catalysts with desired function. In this review, we discuss and summarize strategies for changing the atomic distance from three aspects and relate their effects on the reactivity of catalysts. First, the effects of regulating bond length between metal and coordination atom at one single-atom site on the catalytic performance are introduced. The bond lengths are affected by the strain effect of the support and high-shell doping and can evolve during the reaction. Next, the influence of the distance between single-atom sites on the catalytic performance is discussed. Due to the space matching of adsorption and electron transport, the catalytic performance can be adjusted with the shortening of site distance. In addition, the effect of the arrangement spacing of the surface metal active atoms on the catalytic performance of metal nanocatalysts is studied. Finally, a comprehensive summary and outlook of the relationship between atomic distance and catalytic performance is given.

A general protocol for precise syntheses of ordered mesoporous intermetallic nanoparticles

Intermetallic nanomaterials consist of two or more metals in a highly ordered atomic arrangement. There are many possible combinations and morphologies, and exploring their properties is an important research area. Their strict stoichiometry requirement and well-defined atom binding environment make intermetallic compounds an ideal research platform to rationally optimize catalytic performance. Making mesoporous intermetallic materials is a further advance; crystalline mesoporosity can expose more active sites, facilitate the mass and electron transfer, and provide the distinguished mesoporous nanoconfinement environment. In this Protocol, we describe how to prepare ordered mesoporous intermetallic nanomaterials with controlled compositions, morphologies/structures and phases by a general concurrent template strategy. In this approach, the concurrent template used is a hybrid of mesoporous platinum or palladium and Korea Advanced Institute of Science and Technology-6 (KIT-6) (meso-Pt/KIT-6 or meso-Pd/KIT-6) that can be transformed by the second precursors under reducing conditions. The second precursor can either be a second metal or a metalloid/non-metal, e.g., boron/phosphorus. KIT-6 is a silica scaffold that is removed using NaOH or HF to form the mesoporous product. Procedures for example catalytic applications include the 3-nitrophenylacetylene semi-hydrogenation reaction, p-nitrophenol reduction reaction and electrochemical hydrogen evolution reaction. The synthetic strategy for preparation of ordered mesoporous intermetallic nanoparticles would take almost 5 d; the physical characterization by electron microscope, X-ray diffraction and inductively coupled plasma-mass spectrometry takes ~2 days and the function characterization depends on the research question, but for catalysis it takes 1-5 h.

Intermetallic Single-Atom Alloy In-Pd Bimetallene for Neutral Electrosynthesis of Ammonia from Nitrate

Harvesting recyclable ammonia (NH₃) from the electrocatalytic reduction of nitrate (NO₃RR) offers a sustainable strategy to close the ecological nitrogen cycle from nitration contamination in an energy-efficient and environmentally friendly manner. The emerging intermetallic single-atom alloys (ISAAs) are recognized to achieve the highest site density of single atoms by isolating contiguous metal atoms into single sites stabilized by another metal within the intermetallic structure, which holds promise to couple the catalytic benefits from intermetallic nanocrystals and single-atom catalysts for promoting NO₃RR. Herein, ISAA In-Pd bimetallene, in which the Pd single atoms are isolated by surrounding In atoms, is reported to boost neutral NO₃RR with a NH₃ Faradaic efficiency (FE) of 87.2%, a yield rate of 28.06 mg h^-1 mg_Pd^-1, and an exceptional electrocatalytic stability with increased activity/selectivity over 100 h and 20 cycles. The ISAA structure induces substantially diminished overlap of Pd d-orbitals and narrowed p-d hybridization of In-p and Pd-d states around the Fermi level, resulting in a stronger NO₃^- adsorption and a depressed energy barrier of the potential-determining step for NO₃RR. Further integrating the NO₃RR catalyst into a Zn-NO₃^- flow battery as the cathode delivers a power density of 12.64 mW cm^-2 and a FE of 93.4% for NH₃ production.

Designing single-site alloy catalysts using a degree-of-isolation descriptor

Geometrically isolated metal atoms in alloy catalysts can target efficient and selective catalysis. However, the geometric and electronic disturbance between the active atom and its neighbouring atoms, that is, diverse microenvironments, makes the active site ambiguous. Herein, we demonstrate a methodology to describe the microenvironment and determine the effectiveness of active sites in single-site alloys. A simple descriptor, degree-of-isolation, is proposed, considering both electronic regulation and geometric modulation within a PtM ensemble (M = transition metal). The catalytic performance of PtM single-site alloy is examined thoroughly using this descriptor for an industrially important reaction, propane dehydrogenation. The volcano-shaped isolation-selectivity plot reveals a Sabatier-type principle for designing selective single-site alloys. Specifically, for a single-site alloy with a high degree-of-isolation, alternation of the active centre has a great impact on tuning selectivity, validated by the outstanding consistency between experimental propylene selectivity and the computational descriptor.

The synthesis of single-atom catalysts for heterogeneous catalysis

Heterogeneous catalysis is an important class of reactions in industrial production, especially in green chemical synthesis, and environmental and organic catalysis. Single-atom catalysts (SACs) have emerged as promising candidates for heterogeneous catalysis, due to their outstanding catalytic activity, high selectivity, and maximum atomic utilization efficiency. The high specific surface energy of SACs, however, results in the migration and aggregation of isolated atoms under typical reaction conditions. The controllable preparation of highly efficient and stable SACs has been a serious challenge for applications. Herein, we summarize the recent progress in the precise synthesis of SACs and their different heterogeneous catalyses, especially involving the oxidation and reduction reactions of small organic molecules. At the end of this review, we also introduce the challenges confronted by single-atom materials in heterogeneous catalysis. This review aims to promote the generation of novel high-efficiency SACs by providing an in-depth and comprehensive understanding of the current development in this research field.

Locking Effect in Metal@MOF with Superior Stability for Highly Chemoselective Catalysis

Ultrasmall metal nanoparticles (NPs) show high catalytic activity in heterogeneous catalysis but are prone to reunion and loss during the catalytic process, resulting in low chemoselectivity and poor efficiency. Herein, a locking effect strategy is proposed to synthesize high-loading and ultrafine metal NPs in metal-organic frameworks (MOFs) for efficient chemoselective catalysis with high stability. Briefly, the MOF ZIF-90 with aldehyde groups cooperating with diamine chains via aldimine condensation was interlocked, which was employed to confine in situ formation of Au NPs, denoted as Au@L-ZIF-90. The optimized Au@L_a-ZIF-90 has highly dispersed Au NPs (2.60 ± 0.81 nm) with a loading amount around 22 wt % and shows a great performance toward 3-aminophenylacetylene (3-APA) from the selective hydrogenation of 3-nitrophenylacetylene (3-NPA) with a high yield (99%) and excellent durability (over 20 cycles), far superior to contrast catalysts without chains locking and other reported catalysts. In addition, experimental characterization and systematic density functional theory calculations further demonstrate that the locked MOF modulates the charge of Au nanoparticles, making them highly specific for nitro group hydrogenation to obtain 3-APA with high selectivity (99%). Furthermore, this locking effect strategy is also applicable to other metal nanoparticles confined in a variety of MOFs, and all of these catalysts locked with chains show great selectivity (≥90%) of 3-APA. The proposed strategy in this work provides a novel and universal method for precise control of the inherent activity of accessible metal nanoparticles with a programmable MOF microenvironment toward highly specific catalysis.

Isolated Electron-Rich Ruthenium Atoms in Intermetallic Compounds for Boosting Electrochemical Nitric Oxide Reduction to Ammonia

The direct electrochemical nitric oxide reduction reaction (NORR) is an attractive technique for converting NO into NH₃ with low power consumption under ambient conditions. Optimizing the electronic structure of the active sites can greatly improve the performance of electrocatalysts. Herein, we prepare body-centered cubic RuGa intermetallic compounds (i.e., bcc RuGa IMCs) via a substrate-anchored thermal annealing method. The electrocatalyst exhibits a remarkable NH₄ ⁺ yield rate of 320.6 μmol h^-1  mg^-1 _Ru with the corresponding Faradaic efficiency of 72.3 % at very low potential of -0.2 V vs. reversible hydrogen electrode (RHE) in neutral media. Theoretical calculations reveal that the electron-rich Ru atoms in bcc RuGa IMCs facilitate the adsorption and activation of *HNO intermediate. Hence, the energy barrier of the potential-determining step in NORR could be greatly reduced.

Isolating Contiguous Ir Atoms and Forming Ir-W Intermetallics with Negatively Charged Ir for Efficient NO Reduction by CO

The lack of efficient catalysts with a wide working temperature window and vital O₂ and SO₂ resistance for selective catalytic reduction of NO by CO (CO-SCR) largely hinders its implementation. Here, a novel Ir-based catalyst with only 1 wt% Ir loading is reported for efficient CO-SCR. In this catalyst, contiguous Ir atoms are isolated into single atoms, and Ir-W intermetallic nanoparticles are formed, which are supported on ordered mesoporous SiO₂ (KIT-6). Notably, this catalyst enables complete NO conversion to N₂ at 250 °C in the presence of 1% O₂ and has a wide temperature window (250-400 °C), outperforming the comparison samples with Ir isolated-single-atomic-sites and Ir nanoparticles, respectively. Also, it possesses a high SO₂ tolerance. Both experimental results and theoretical calculations reveal that single Ir atoms are negatively charged, dramatically enhancing the NO dissociation, while the Ir-W intermetallic nanoparticles accelerate the reduction of the N₂ O and NO₂ intermediates by CO.

Hydrogenation of MTHPA to MHHPA over Ni-based catalysts: Al2O3 coating, Ru incorporation and kinetics

Because of its excellent performance, methyl hexahydrophthalic anhydride (MHHPA) is a new anhydride-based epoxy resin curing agent after methyl tetrahydrophthalic anhydride (MTHPA). To improve the activity and stability of conventional RANEY® nickel catalysts in the catalytic hydrogenation of MTHPA to MHHPA reaction, RANEY® nickel encapsulated with porous Al₂O₃ and alumina-supported Ni-Ru bimetallic catalysts were designed and synthesized in this study. The physicochemical properties and surface reactions over the catalysts were characterized by N₂ adsorption and desorption, X-ray diffraction (XRD), hydrogen temperature-programmed reduction/desorption (H₂-TPR/TPD), X-ray photoelectron spectroscopy (XPS), scanning electronic microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and in situ diffuse reflectance infrared Fourier transformations spectroscopy (DRIFTS). The kinetic model of MTHPA hydrogenation over NiRu/Al was established and the parameters were estimated using the least-square method. The results showed that the encapsulation of porous Al₂O₃ on the surface of RANEY® nickel enhanced the stability of the Ni skeleton and the adsorption ability of the reactant molecules, which improved its activity for the hydrogenation reaction. The introduction of Ru improved the dispersion and stability of metallic Ni, which greatly increased the conversion ability towards MTHPA hydrogenation, but it had a trend to cause C[double bond, length as m-dash]C bond transfer at lower temperatures, increasing the hydrogenation difficulties. The kinetic results based on Ni-Ru bimetallic catalyst showed that the MTHPA hydrogenation reaction rate was first-order with respect to MTHPA concentration and 0.5-order with respect to hydrogen partial pressure, and the apparent activation energy of the hydrogenation reaction was 37.02 ± 2.62 kJ mol^-1.

Design of Single-Atom Catalysts and Tracking Their Fate Using Operando and Advanced X-ray Spectroscopic Tools

The potential of operando X-ray techniques for following the structure, fate, and active site of single-atom catalysts (SACs) is highlighted with emphasis on a synergetic approach of both topics. X-ray absorption spectroscopy (XAS) and related X-ray techniques have become fascinating tools to characterize solids and they can be applied to almost all the transition metals deriving information about the symmetry, oxidation state, local coordination, and many more structural and electronic properties. SACs, a newly coined concept, recently gained much attention in the field of heterogeneous catalysis. In this way, one can achieve a minimum use of the metal, theoretically highest efficiency, and the design of only one active site-so-called single site catalysts. While single sites are not easy to characterize especially under operating conditions, XAS as local probe together with complementary methods (infrared spectroscopy, electron microscopy) is ideal in this research area to prove the structure of these sites and the dynamic changes during reaction. In this review, starting from their fundamentals, various techniques related to conventional XAS and X-ray photon in/out techniques applied to single sites are discussed with detailed mechanistic and in situ/operando studies. We systematically summarize the design strategies of SACs and outline their exploration with XAS supported by density functional theory (DFT) calculations and recent machine learning tools.

Inert metal induces the modulation of unsaturated aldehyde absorption mode for enhanced selective hydrogenation

Selective hydrogenation of α,β-unsaturated aldehydes to obtain a high yield of unsaturated alcohols is important in industrial production. This is still a great challenge because it is thermally more favorable for the hydrogenation of CC than for the CO bond. Various strategies have been developed to optimize the catalysts for improving selectivity but are usually accompanied by the sacrifice of catalytic activity. Herein, we adopt the inert metal inducement strategy to synthesize a series of Ir-M alloy nanoparticle catalysts. The optimal catalyst IrCd₅ exhibits impressive catalytic performance in the selective hydrogenation of cinnamaldehyde, achieving 96.7% conversion with 94.3% selectivity for cinnamal alcohol, which is far superior to that of the Ir counterpart. Furthermore, the H₂ temperature-programmed desorption (H₂-TPD) test, styrene-TPD test, surface valence band test and density functional theory calculations demonstrate that the adsorption mode of cinnamaldehyde shifted from parallel to vertical configurations after introducing an inert metal. Compared to Ir, the weaker adsorption of alkene and stronger adsorption of the substrate for IrCd₅ lead to the prior adsorption and hydrogenation of the CO bond, thus elevating the selectivity of the cinnamal alcohol. This strategy disperses precious metal nanoparticles effectively, maximizes atomic utilization, and improves the selectivity, which provides a new avenue to design bimetal alloy catalysts for the selective hydrogenation of α,β-unsaturated aldehydes.

Mechanism driven design of trimer Ni1Sb2 site delivering superior hydrogenation selectivity to ethylene

Mechanism driven catalyst design with atomically uniform ensemble sites is an important yet challenging issue in heterogeneous catalysis associated with breaking the activity-selectivity trade-off. Herein, a trimer Ni₁Sb₂ site in NiSb intermetallic featuring superior selectivity is elaborated for acetylene semi-hydrogenation via a theoretical guidance with a precise synthesis strategy. The trimer Ni₁Sb₂ site in NiSb intermetallic is predicted to endow acetylene reactant with an adequately but not excessively strong σ-adsorption mode while ethylene product with a weak π-adsorption one, where such compromise delivers higher ethylene formation rate. An in-situ trapping of molten Sb by Ni strategy is developed to realize the construction of Ni₁Sb₂ site in the intermetallic P6₃/mmc NiSb catalysts. Such catalyst exhibits ethylene selectivity up to 93.2% at 100% of acetylene conversion, significantly prevailing over the referred Ni catalyst. These insights shed new lights on rational catalyst design by taming active sites to energetically match targeted reaction pathway.

Designing atomically uniform ensemble sites for matching targeted reaction pathway is important yet challenging in heterogeneous catalysis. Here, the authors fabricate a trimer Ni₁Sb₂ site featuring superior selectivity for acetylene semi-hydrogenation via a mechanism-driven design strategy.

Isolating Contiguous Fe Atoms by Forming a Co-Fe Intermetallic Catalyst from Spent Lithium-Ion Batteries to Regulate Activity for Zinc-Air Batteries

The recycling of spent lithium-ion batteries (LIBs) has become a necessity for recovering valuable resources and protecting the environment to support sustainable development. We report the design of a highly efficient CoFe/C catalyst by combining the Co and Fe wastes from spent LIBs with sawdust-derived carbon, which were cathode materials in zinc-air batteries (ZABs). As a result of the electrostatic attraction between the Co³⁺/Fe³⁺ cations and the hydroxyl groups in sawdust, CoFe nanoparticles are uniformly dispersed in the CoFe/C catalyst after annealing. The Fe atoms in the CoFe nanoparticles are all isolated into single sites by the Co atoms, which redistribute the electrons in the CoFe/C catalyst. The catalyst produced a Pt-like dissociative mechanism, contributing to an excellent oxygen reduction reaction performance. After assembly in ZABs, the CoFe/C catalyst cathode exhibits a long cycling stability of 350 h and an impressive power density of 199.2 mW cm^-2. The CoFe/C catalyst cathode has also been used in flexible ZABs to power LEDs or charge a mobile phone. The work combines spent LIBs with sawdust to fabricate high-performance catalysts, which could reduce environmental pollution and realize high economic value.

Ultrahigh Stable Methanol Oxidation Enabled by a High Hydroxyl Concentration on Pt Clusters/MXene Interfaces

Anchoring platinum catalysts on appropriate supports, e.g., MXenes, is a feasible pathway to achieve a desirable anode for direct methanol fuel cells. The authentic performance of Pt is often hindered by the occupancy and poisoning of active sites, weak interaction between Pt and supports, and the dissolution of Pt. Herein, we construct three-dimensional (3D) crumpled Ti₃C₂T_x MXene balls with abundant Ti vacancies for Pt confinement via a spray-drying process. The as-prepared Pt clusters/Ti₃C₂T_x (Ptc/Ti₃C₂T_x) show enhanced electrocatalytic methanol oxidation reaction (MOR) activity, including a relatively low overpotential, high tolerance to CO poisoning, and ultrahigh stability. Specifically, it achieves a high mass activity of up to 7.32 A mg_Pt^-1, which is the highest value reported to date in Pt-based electrocatalysts, and 42% of the current density is retained on Ptc/Ti₃C₂T_x even after the 3000 min operative time. In situ spectroscopy and theoretical calculations reveal that an electric field-induced repulsion on the Ptc/Ti₃C₂T_x interface accelerates the combination of OH^- and CO adsorption intermediates (CO_ads) in kinetics and thermodynamics. Besides, this Ptc/Ti₃C₂T_x also efficiently electrocatalyze ethanol, ethylene glycol, and glycerol oxidation reactions with comparable activity and stability to commercial Pt/C.

H2 , B-H, and Si-H Bond Activation and Facile Protonolysis Driven by Pt-Base Metal Cooperation

We report a series of heterobimetallic Pt/Zn and Pt/Ca complexes to study the effect of proximity of a dicationic base metal on the organometallic Pt species. Varying degrees of Pt⋅⋅⋅Zn and Zn interaction with the bridging Me group are achieved, showcasing snapshots of a hypothetical process of retrotransmetalation from Pt to Zn. In contrast, only weak interactions were observed for Ca with a Pt-bound Me group. Activation of H₂ , B-H and Si-H bonds leads to the formation of hydride-bridged Pt-H-Zn complexes, which is not observed in the absence of Zn, pointing out the importance of metal-metal cooperation. Reactivity of PtMe₂ /M²⁺ with terminal acetylene, water and methanol is also studied, leading to facile protonation of one of the Me groups at the Pt center only when Zn is present. This study sheds light on various ways in which the presence of a 2+ metal cation significantly affects the reactivity of a common organoplatinum complex.

Photothermal-Driven High-Performance Selective Hydrogenation System Enabled by Delicately Designed IrCo Nanocages

The incorporation of a transition metal into a noble metal for the formation of nanoalloys paves a potential way to modulate the electronic structures and spatial arrangement modes, thereby manipulating the target catalysis under the desired reaction pathways. Herein, a top-down synthetic route to fabricate IrCo nanoalloys with delicately designed compositions and morphologies at an extremely low calcination temperature of 200 °C is reported, which efficiently breaks through the thermodynamic limitations caused by the large atomic radii and electronegativity discrepancies between Co and Ir. A high-performance selective hydrogenation system enabled by the synthesized IrCo nanoalloys and the light irradiation is further established. Significantly, the unique properties of IrCo alloy, involving the special capability of generating local heating rather than hot electrons under light irradiation (the hot-electron effect was considered detrimental to hydrogenation reactions), as well as the highly polarized surface which aids in the hydrogen transfer from borane-ammonia complex (AB) to 4-nitrostyrene (4-NS) are discovered.

Support Morphology Effect on Selective Hydrogenation of 3-Nitrostyrene to 3-Vinylaniline over Pt/α-Fe2 O3 Catalysts

Selective hydrogenation of substituted nitroaromatic compounds is an extremely important and challenging reaction. Supported metal catalysts attract much attention in this reaction because the properties of metal nanoparticles (NPs) can be modified by the nature of the support. Herein, the support morphology on the catalytic performance of selective hydrogenation of 3-nitrostyrene to 3-vinylaniline was investigated. Pt NPs supported on octadecahedral α-Fe₂ O₃ supports with a truncated hexagonal bipyramid shape (Pt/α-Fe₂ O₃ -O) and rod-shaped α-Fe₂ O₃ supports (Pt/α-Fe₂ O₃ -R) were prepared by glycol reduction method. Detailed characterizations reveal that the electronic structure and dispersion of Pt NPs can be modified by the supports. The Pt/α-Fe₂ O₃ -O catalyst exhibited superior catalytic performance for hydrogenation of 3-nitrostyrene because of its low coordinated Pt sites and the small Pt NPs size, which is benefit from the high-index exposed surfaces of truncated hexagonal bipyramid-shaped α-Fe₂ O₃ support. The structural evolution during the catalytic reaction was investigated in detail by identical location transmission electron microscopy (IL-TEM) method, which found that the high cycling activity of Pt/α-Fe₂ O₃ -O catalyst during the cycle experiment results from the stability of Pt NPs.

Highly-efficient RuNi single-atom alloy catalysts toward chemoselective hydrogenation of nitroarenes

The design and exploitation of high-performance catalysts have gained considerable attention in selective hydrogenation reactions, but remain a huge challenge. Herein, we report a RuNi single atom alloy (SAA) in which Ru single atoms are anchored onto Ni nanoparticle surface via Ru–Ni coordination accompanied with electron transfer from sub-surface Ni to Ru. The optimal catalyst 0.4% RuNi SAA exhibits simultaneously improved activity (TOF value: 4293 h–1) and chemoselectivity toward selective hydrogenation of 4-nitrostyrene to 4-aminostyrene (yield: >99%), which is, to the best of our knowledge, the highest level compared with reported heterogeneous catalysts. In situ experiments and theoretical calculations reveal that the Ru–Ni interfacial sites as intrinsic active centers facilitate the preferential cleavage of N–O bond with a decreased energy barrier by 0.28 eV. In addition, the Ru–Ni synergistic catalysis promotes the formation of intermediates (C8H7NO* and C8H7NOH*) and accelerates the rate-determining step (hydrogenation of C8H7NOH*).

Atomically Dispersed Cu Catalyst for Efficient Chemoselective Hydrogenation Reaction

The Cu-based nanocatalysts have shown a high selectivity toward selective hydrogenation reaction, but the underlying catalytic mechanism is still murky. Herein, we report a new gram-scale strategy for realizing the single atom Cu site incorporated into the melem ring of graphitic carbon nitride (Cu₁/CN) for understanding the catalytic mechanism of a hydrogenation reaction. The as-synthesized Cu₁/CN exhibits unprecedented selectivity (100%), high activity (TOF = 2.9 × 10³ h^-1), and outstanding stability for selective hydrogenation of 4-nitrostyrene. We reveal that the presence of hydroxymethyl from trimethylolmelamine is beneficial to atomically disperse Cu atoms in the CN. X-ray absorption fine structure tests reveal that the Cu atom of Cu₁/CN is dominated by the quaternary coordination way (Cu-N₄) in the melem ring of CN. Density functional theory calculations confirm that the high reactivity and selectivity originate from the anchored Cu sites creating the optimal chemical environment for the highly efficient hydrogenation reaction.

Mesoporosity-Enabled Selectivity of Mesoporous Palladium-Based Nanocrystals Catalysts in Semihydrogenation of Alkynes

We reported mesoporosity engineering as a general strategy to promote semihydrogenation selectivity of palladium (Pd)-based nanobundles catalysts. The best mesoporous PdP displayed full conversion, remarkable activity, excellent selectivity, and high stability in semihydrogenation of 1-phenyl-1-propyne, all of which are remarkably better than commercial Lindlar catalysts. Mechanistic investigations ascribed high semihydrogenation selectivity to continuous crystalline framework and penetrated mesoporous channel of catalysts that weakened the adsorption and interaction capacity of alkenes and thus inhibited over-hydrogenation of alkenes to industrially unfavorable alkanes. Density functional theory calculations further demonstrated that convex crystalline mesoporosity of nanobundles catalysts electronically optimized the coordination environment of Pd active sites and energetically changed hydrogenation trends, resulting in a superior semihydrogenation selectivity to targeted alkenes.

Atomically dispersed metal catalysts on nanodiamond and its derivatives: synthesis and catalytic application

Atomically dispersed metal catalysts (ADMCs) have attracted increasing interest in the field of heterogeneous catalysis. As sub-nanometric catalysts, ADMCs have exhibited remarkable catalytic performance in many reactions. ADMCs are classified into two categories: single atom catalysts (SACs) and atomically dispersed clusters with a few atoms. To stabilize the highly active ADMCs, nanodiamond (ND) and its derivatives (NDDs) are promising supports. In this Feature Article, we have introduced the advantages of NDDs with a highly curved surface and tunable surface properties. The controllable defective sites and oxygen functional groups are known as the anchoring sites for ADMCs. Tunable surface acid-base properties enable ADMCs supported on NDDs to exhibit unique selectivity towards target products and an extended lifetime in many reactions. In addition, we have firstly overviewed the recent advances in the synthesis strategies for effectively fabricating ADMCs on NDDs, and further discussed how to achieve the atomic dispersion of metal precursors and stabilize the as-formed metal atoms against migration and agglomeration based on NDDs. And then, we have also systematically summarized the advantages of ADMCs supported on NDDs in reactions, including hydrogenation, dehydrogenation, aerobic oxidation and electrochemical reaction. These reactions can also effectively guide the design of ADMCs. The recent progress in understanding the effect of structure of active centers and metal-support interactions (MSIs) on the catalytic performance of ADMCs is particularly highlighted. At last, the possible research directions in ADMCs are forecasted.

Construction of Pd-Zn dual sites to enhance the performance for ethanol electro-oxidation reaction

Rational design and synthesis of superior electrocatalysts for ethanol oxidation is crucial to practical applications of direct ethanol fuel cells. Here, we report that the construction of Pd-Zn dual sites with well exposure and uniformity can significantly improve the efficiency of ethanol electro-oxidation. Through synthetic method control, Pd-Zn dual sites on intermetallic PdZn nanoparticles, Pd-Pd sites on Pd nanoparticles and individual Pd sites are respectively obtained on the same N-doped carbon coated ZnO support. Compared with Pd-Pd sites and individual Pd sites, Pd-Zn dual sites display much higher activity for ethanol electro-oxidation, exceeding that of commercial Pd/C by a factor of ~24. Further computational studies disclose that Pd-Zn dual sites promote the adsorption of ethanol and hydroxide ion to optimize the electro-oxidation pathway with dramatically reduced energy barriers, leading to the superior activity. This work provides valuable clues for developing high-performance ethanol electro-oxidation catalysts for fuel cells.

Size- and composition-controlled intermetallic nanocrystals via amalgamation seeded growth

Intermetallic nanocrystals are a large family of emerging materials with extensive applications in many fields. Yet, a generalized synthetic method for intermetallic nanocrystals is lacking. Here, we report the development of a colloidal synthesis method based on amalgamation of monometallic nanocrystal seeds with low-melting point metals. We use this approach to achieve crystalline and compositionally uniform intermetallic nanocrystals of Au-Ga, Ag-Ga, Cu-Ga, Ni-Ga, Pd-Ga, Pd-In, and Pd-Zn compounds. We demonstrate both compositional tunability across the phase spaces (e.g., AuGa2, AuGa, Au7Ga2, and Ga-doped Au), size tunability (e.g., 14.0-, 7.6-, and 3.8-nm AuGa2), and size uniformity (e.g., 5.4% size deviations). This approach makes it possible to systematically achieve size- and composition-controlled intermetallic nanocrystals, opening up a multitude of possibilities for these materials.

A Top-Down Strategy to Realize Surface Reconstruction of Small-Sized Platinum-Based Nanoparticles for Selective Hydrogenation

Over the past decades, despite the substantial efforts that have been devoted to the modifications of Pt nanoparticles (NPs) to tailor their selectivities for hydrogenation reactions, there are still a lack of facile strategies for precisely regulation of the surface properties of NPs, especially for those with small sizes. In this work, we propose a top-down thermal annealing strategy for tuning the surface properties of Pt-based NPs (≈4 nm) without the occurrence of aggregation. Compared to conventional bottom-up methods, the present top-down strategy can precisely regulate the surface compositions of Pt-Cd NPs and other ternary Pt-Cd-M NPs (M=Fe, Ni, Co, Mn, and Sn). The optimized Pt-Cd NPs exhibit excellent selectivity toward phenylacetylene and 4-nitrostyrene hydrogenations with a styrene selectivity and 4-aminophenyl styrene selectivity of 95.2 % and 94.5 %, respectively. This work provides a general strategy for the surface reconstructions of Pt-based NPs, and promotes fundamental research on catalyst design for heterogeneous catalysis.

Atomically dispersed Pd-Ru dual sites in an amorphous matrix towards efficient phenylacetylene semi-hydrogenation

Optimizing the active sites to balance the conversion and selectivity of the target reaction has long been a challenging quest in developing noble metal-based catalysts. By dispersing Pd and Ru in an amorphous zirconium hydrogen phosphate matrix cross-linked by ionic inorganic oligomers, highly diluted noble metal (<0.2 mol%) can be utilized as dual single-atom sites in oxides for the semi-hydrogenation of phenylacetylene with optimized conversion and selectivity (both >90%) to styrene. In situ DRIFT-IR results suggested the fast generation of surface hydroxyl groups during the catalytic reaction, indicating the high efficiency of the single-atom sites to dissociate bound H2. This work provides an easily scaled-up method for the production of cost-effective single-atom catalysts extendable to various oxide matrices.

Boosting Interfacial Electron Transfer between Pd and ZnTi-LDH via Defect Induction for Enhanced Metal-Support Interaction in CO Direct Esterification Reaction

Strong metal-support interaction is crucial to the stability of catalysts in heterogeneous catalysis. However, reports on boosting interfacial electron transfer between metal and support via defect induction for enhanced metal-support interaction are limited. In this work, ultrathin reducible ZnTi-layered double hydroxide (LDH) nanosheets with rich oxygen defects were synthesized to stabilize Pd clusters, and the rich oxygen defects promoted Pd cluster bonding with Zn and Ti atoms in supports, thereby forming a metal-metal bond. Electron spin resonance (ESR), X-ray absorption fine spectra (XAFS), and density functional theory (DFT) calculations demonstrate remarkable interfacial electron transfer (0.62 e). The Pd/ZnTi-LDH catalyst shows superior catalytic stability for CO direct esterification to dimethyl oxalate. By contrast, the nonreducible Pd/ZnAl-LDH catalyst with a few oxygen defects shows minimal interfacial electron transfer (0.08 e), which leads to relatively poor catalytic stability. This work provides a deep insight into promoting the stability of catalysts by boosting interfacial electron transfer via defect induction.

Insights into the Interfacial Effects in Heterogeneous Metal Nanocatalysts toward Selective Hydrogenation

Heterogeneous metal catalysts are distinguished by their structure inhomogeneity and complexity. The chameleonic nature of heterogeneous metal catalysts have prevented us from deeply understanding their catalytic mechanisms at the molecular level and thus developing industrial catalysts with perfect catalytic selectivity toward desired products. This Perspective aims to summarize recent research advances in deciphering complicated interfacial effects in heterogeneous hydrogenation metal nanocatalysts toward the design of practical heterogeneous catalysts with clear catalytic mechanism and thus nearly perfect selectivity. The molecular insights on how the three key components (i.e., catalytic metal, support, and ligand modifier) of a heterogeneous metal nanocatalyst induce effective interfaces determining the hydrogenation activity and selectivity are provided. The interfaces influence not only the H₂ activation pathway but also the interaction of substrates to be hydrogenated with catalytic metal surface and thus the hydrogen transfer process. As for alloy nanocatalysts, together with the electronic and geometric ensemble effects, spillover hydrogenation occurring on catalytically "inert" metal by utilizing hydrogen atom spillover from active metal is highlighted. The metal-support interface effects are then discussed with emphasis on the molecular involvement of ligands located at the metal-support interface as well as cationic species from the support in hydrogenation. The mechanisms of how organic modifiers, with the ability to induce both 3D steric and electronic effects, on metal nanocatalysts manipulate the hydrogenation pathways are demonstrated. A brief summary is finally provided together with a perspective on the development of enzyme-like heterogeneous hydrogenation metal catalysts.