Photocathode functionalized with a molecular cobalt catalyst for selective carbon dioxide reduction in water

A Planar-Structured Dinuclear Cobalt(II) Complex with Indirect Synergy for Photocatalytic CO2-to-CO Conversion

Dinuclear metal synergistic catalysis (DMSC) has been proved an effective approach to enhance catalytic efficiency in photocatalytic CO2 reduction reaction, while it remains challenge to design dinuclear metal complexes that can show DMSC effect. The main reason is that the influence of the microenvironment around dinuclear metal centres on catalytic activity has not been well recognized and revealed. Herein, we report a dinuclear cobalt complex featuring a planar structure, which displays outstanding catalytic efficiency for photochemical CO2-to-CO conversion. The turnover number (TON) and turnover frequency (TOF) values reach as high as 14457 and 0.40 s-1 respectively, 8.6 times higher than those of the corresponding mononuclear cobalt complex. Control experiments and theoretical calculations revealed that the enhanced catalytic efficiency of the dinuclear cobalt complex is due to the indirect DMSC effect between two CoII ions, energetically feasible one step two-electron transfer process by Co2 I,I intermediate to afford Co2 II,II(CO2 2-) intermediate and fast mass transfer closely related with the planar structure.

Photoelectrocatalytic CO2 Reduction to Methanol by Molecular Self-Assemblies Confined in Covalent Polymer Networks

Inspired by the porous structures of photosynthetic organelles, we report here a new type of photoelectrode based on a standalone macroporous conjugated polymer network (MCN) that converts sunlight into high-energy electrons for CO2 reduction to CH3OH. The MCN provides supramolecular cavities with sufficient functional groups that control the structures of photocatalytic assemblies, which circumvents the geometric limitations of traditional inorganic counterparts. Stabilized interfacial contact between MCN and photocatalysts is achieved by strong chemical linkages throughout the network. Solar irradiation of MCN with a cobalt-based catalyst generates highly reducing electrons for the reduction of CO2 to CH3OH at a conversion efficiency of 70%. Production of CH3OH sustains for at least 100 h, with a small decrease in yield rates. Scaling up the photoelectrode from 1 to 100 cm2 results in photocurrent generation stabilized at 0.25 A and continuous CH3OH production at a conversion efficiency of 85%, demonstrating the scalability and high performances.

Hydrophobic assembly of molecular catalysts at the gas-liquid-solid interface drives highly selective CO2 electromethanation

Molecular catalysts offer tunable active and peripheral sites, rendering them ideal model systems to explore fundamental concepts in catalysis. However, hydrophobic designs are often regarded as detrimental for dissolution in aqueous electrolytes. Here we show that established cobalt terpyridine catalysts modified with hydrophobic perfluorinated alkyl side chains can assemble at the gas-liquid-solid interfaces on a gas diffusion electrode. We find that the self-assembly of these perfluorinated units on the electrode surface results in a catalytic system selective for electrochemical CO2 reduction to CH4, whereas every other cobalt terpyridine catalyst reported previously was only selective for CO or formate. Mechanistic investigations suggest that the pyridine units function as proton shuttles that deliver protons to the dynamic hydrophobic pocket in which CO2 reduction takes place. Finally, integration with fluorinated carbon nanotubes as a hydrophobic conductive scaffold leads to a Faradaic efficiency for CH4 production above 80% at rates above 10 mA cm-2-impressive activities for a molecular electrocatalytic system.

Diazonium-Functionalized Silicon Hybrid Photoelectrodes: Film Thickness and Composition Effects on Photoelectrochemical Behavior

Aryl diazonium electrografting is a powerful method for imparting molecular functionality onto various substrates by forming a stable carbon-surface covalent bond. While the high reactivity of the aryl radical intermediate makes this method fast and reliable, it can also lead to the formation of an insulating and disordered multilayer film. These thick films affect electrochemical performance, especially for semiconductor substrates used in photoelectrochemical applications. We studied the effects of film thickness and composition by electrografting in situ-generated aminobenzene diazonium salts onto both n-type and p-type silicon electrodes at fixed potentials. Next, we attached ferrocene to the amine-terminated films and probed their (photo)electrochemical behavior. Cyclic voltammetry measurements showed decreased electrochemical reversibility with increasing diazonium film thickness; this reversibility was restored when ferrocene was incorporated throughout the film with a layer-by-layer deposition process. Finally, we compared the behavior of dark p-type electrodes to n-type photoelectrodes and observed differences in the electrochemical reversibility that we attribute to the change in potential drop across the two interfaces.

Charge Photoaccumulation in Covalent Polymer Networks for Boosting Photocatalytic Nitrate Reduction to Ammonia

In the design of photoelectrocatalytic cells, a key element is effective photogeneration of electron-hole pairs to drive redox activation of catalysts. Despite recent progress in photoelectrocatalysis, experimental realization of a high-performance photocathode for multi-electron reduction of chemicals, such as nitrate reduction to ammonia, has remained a challenge due to difficulty in obtaining efficient electrode configurations for extraction of high-throughput electrons from absorbed photons. This work describes a new design for catalytic photoelectrodes using chromophore assembly-functionalized covalent networks for boosting eight-electron reduction of nitrate to ammonia. Upon sunlight irradiation, the photoelectrode stores a mass of reducing equivalents at the photoexcited chromophore assembly for multielectron reduction of a copper catalyst, enabling efficient nitrate reduction to ammonia. By introducing the new photoelectrode structure, it is demonstrated that the electronic interplay between charge photo-accumulating assembly and multi-electron redox catalysts can be optimized to achieve proper balance between electron transfer dynamics and thermodynamic output of photoelectrocatalytic systems.

Antenna Effect in Noble Metal-Free Dye-Sensitized Photocatalytic Systems Enhances CO2 -to-CO Conversion

Dye-sensitized photocatalytic systems (DSPs) have been extensively investigated for solar-driven hydrogen (H2 ) evolution. However, their application in carbon dioxide (CO2 ) reduction remains limited. Furthermore, current solar-driven CO2 -to-CO DSPs typically employ rhenium complexes as catalysts. In this study, we have developed DSPs that incorporate noble metal-free components, specifically a zinc-porphyrin as photosensitizer (PS) and a cobalt-quaterpyridine as catalyst (CAT). Taking a significant stride forward, we have achieved an antenna effect for the first time in CO2 -to-CO DSPs by introducing a Bodipy as an additional chromophore to enhance light harvesting efficiency. The energy transfer from Bodipy to zinc porphyrin resulted in remarkable stability (turn over number (TON)=759 vs. CAT), and high CO evolution activity (42 mmol g-1  h-1 vs. CAT).

Photoelectrocatalytic Utilization of CO2 : A Big Show of Si-based Photoelectrodes

CO2 is a greenhouse gas that contributes to environmental deterioration; however, it can also be utilized as an abundant C1 resource for the production of valuable chemicals. Solar-driven photoelectrocatalytic (PEC) CO2 utilization represents an advanced technology for the resourcing of CO2 . The key to achieving PEC CO2 utilization lies in high-performance semiconductor photoelectrodes. Si-based photoelectrodes have attracted increasing attention in the field of PEC CO2 utilization due to their suitable band gap (1.1 eV), high carrier mobility, low cost, and abundance on Earth. There are two pathways to PEC CO2 utilization using Si-based photoelectrodes: direct reduction of CO2 into small molecule fuels and chemicals, and fixation of CO2 with organic substrates to generate high-value chemicals. The efficiency and product selectivity of PEC CO2 utilization depends on the structures of the photoelectrodes as well as the composition, morphology, and size of the catalysts. In recent years, significant and influential progress has been made in utilizing Si-based photoelectrodes for PEC CO2 utilization. This review summarizes the latest research achievements in Si-based PEC CO2 utilization, with a particular emphasis on the mechanistic understanding of CO2 reduction and fixation, which will inspire future developments in this field.

Au-decorated Sb2Se3 photocathodes for solar-driven CO2 reduction

Photoelectrodes with FTO/Au/Sb2Se3/TiO2/Au architecture were studied in photoelectrochemical CO2 reduction reaction (PEC CO2RR). The preparation is based on a simple spin coating technique, where nanorod-like structures were obtained for Sb2Se3, as confirmed by SEM images. A thin conformal layer of TiO2 was coated on the Sb2Se3 nanorods via ALD, which acted as both an electron transfer layer and a protective coating. Au nanoparticles were deposited as co-catalysts via photo-assisted electrodeposition at different applied potentials to control their growth and morphology. The use of such architectures has not been explored in CO2RR yet. The photoelectrochemical performance for CO2RR was investigated with different Au catalyst loadings. A photocurrent density of ∼7.5 mA cm-2 at -0.57 V vs. RHE for syngas generation was achieved, with an average Faradaic efficiency of 25 ± 6% for CO and 63 ± 12% for H2. The presented results point toward the use of Sb2Se3-based photoelectrodes in solar CO2 conversion applications.

Efficient Cu2O Photocathodes for Aqueous Photoelectrochemical CO2 Reduction to Formate and Syngas

Photoelectrochemical carbon dioxide reduction (PEC-CO2R) represents a promising approach for producing renewable fuels and chemicals using solar energy. However, attaining even modest solar-to-fuel (STF) conversion efficiency often necessitates the use of costly semiconductors and noble-metal catalysts. Herein, we present a Cu2O/Ga2O3/TiO2 photocathode modified with Sn/SnOx catalysts through a simple photoelectrodeposition method. It achieves a remarkable half-cell STF efficiency of ∼0.31% for the CO2R in aqueous KHCO3 electrolyte, under AM 1.5 G illumination. The system enables efficient production of syngas (FE: ∼62%, CO/H2 ≈ 1:2) and formate (FE: ∼38%) with a consistent selectivity over a wide potential range, from +0.34 to -0.16 V vs the reversible hydrogen electrode. We ascribe the observed performance to the favorable optoelectronic characteristics of our Cu2O heterostructure and the efficient Sn/SnOx catalysts incorporated in the PEC-CO2R reactions. Through comprehensive experimental investigations, we elucidate the indispensable role of Cu2O buried p-n junctions in generating a high photovoltage (∼1 V) and enabling efficient bulk charge separation (up to ∼70% efficiency). Meanwhile, we discover that the deposited Sn/SnOx catalysts have critical dual effects on the overall performance of the PEC devices, serving as active CO2R catalysts as well as the semiconductor front contact. It could facilitate interfacial electron transfer between the catalysts and the semiconductor device for CO2R by establishing a barrier-free ohmic contact.

Local reactivity of metal-insulator-semiconductor photoanodes imaged by photoinduced electrochemiluminescence microscopy

Localized photoinduced electrochemiluminescence (PECL) is studied on photoanodes composed of Ir microbands deposited on n-Si/SiOx. We demonstrate that PECL microscopy precisely imaged the hole-driven heterogeneous photoelectrochemical reactivity. The method is promising for elucidating the local activity of photoelectrodes that are employed in solar energy conversion.

Mechanistic Insights into Photochemical CO2 Reduction to CH4 by a Molecular Iron-Porphyrin Catalyst

Iron tetraphenylporphyrin complex modified with four trimethylammonium groups (Fe-p-TMA) is found to be capable of catalyzing the eight-electron eight-proton reduction of CO₂ to CH₄ photochemically in acetonitrile. In the present work, density functional theory (DFT) calculations have been performed to investigate the reaction mechanism and to rationalize the product selectivity. Our results revealed that the initial catalyst Fe-p-TMA ([Cl-Fe(III)-LR₄]⁴⁺, where L = tetraphenylporphyrin ligand with a total charge of -2, and R₄ = four trimethylammonium groups with a total charge of +4) undergoes three reduction steps, accompanied by the dissociation of the chloride ion to form [Fe(II)-L^••2-R₄]²⁺. [Fe(II)-L^••2-R₄]²⁺, bearing a Fe(II) center ferromagnetically coupled with a tetraphenylporphyrin diradical, performs a nucleophilic attack on CO₂ to produce the ¹η-CO₂ adduct [CO₂^•--Fe(II)-L^•-R₄]²⁺. Two intermolecular proton transfer steps then take place at the CO₂ moiety of [CO₂^•--Fe(II)-L^•-R₄]²⁺, resulting in the cleavage of the C-O bond and the formation of the critical intermediate [Fe(II)-CO]⁴⁺ after releasing a water molecule. Subsequently, [Fe(II)-CO]⁴⁺ accepts three electrons and one proton to generate [CHO-Fe(II)-L^•-R₄]²⁺, which finally undergoes a successive four-electron-five-proton reduction to produce methane without forming formaldehyde, methanol, or formate. Notably, the redox non-innocent tetraphenylporphyrin ligand was found to play an important role in CO₂ reduction since it could accept and transfer electron(s) during catalysis, thus keeping the ferrous ion at a relatively high oxidation state. Hydrogen evolution reaction via the formation of Fe-hydride ([Fe(II)-H]³⁺) turns out to endure a higher total barrier than the CO₂ reduction reaction, therefore providing a reasonable explanation for the origin of the product selectivity.

Cupric porphyrin frameworks on multi-junction silicon photocathodes to expedite the kinetics of CO2 turnover

Photoelectrochemical CO₂ reduction utilizing silicon-based photocathodes offers a promising route to directly store solar energy in chemical bonds, provoking the development of heterogeneous molecular catalysts with high turnover rates. Herein, an in situ surface transformation strategy is adopted to grow metal-organic frameworks (MOFs) on Si-based photocathodes, serving as catalytic scaffolds for boosting both the kinetics and selectivity of CO₂ reduction. Benefitting from the multi-junctional configuration for enhanced charge separation and the porous MOF scaffold enriching redox-active metalloporphyrin sites, the Si photocathode demonstrates a high CO faradaic efficiency of 87% at a photocurrent density of 10.2 mA cm^-2, which is among the best seen for heterogeneous molecular catalysts. This study highlights the exploitation of reticular chemistry and macrocycle complexes as Earth-abundant alternatives for catalyzing artificial photosynthesis.

Aqueous CO2 Reduction on Si Photocathodes Functionalized by Cobalt Molecular Catalysts/Carbon Nanotubes

Photoelectrochemical reduction of CO₂ is a promising approach for renewable fuel production. We herein report a novel strategy for preparation of hybrid photocathodes by immobilizing molecular cobalt catalysts on TiO₂ -protected n⁺ -p Si electrodes (Si|TiO₂ ) coated with multiwalled carbon nanotubes (CNTs) by π-π stacking. Upon loading a composite of Co^II (BrqPy) (BrqPy=4',4''-bis(4-bromophenyl)-2,2' : 6',2'' : 6'',2'''-quaterpyridine) catalyst and CNT on Si|TiO₂ , a stable 1-Sun photocurrent density of -1.5 mA cm^-2 was sustained over 2 h in a neutral aqueous solution with unity Faradaic efficiency and selectivity for CO production at a bias of zero overpotential (-0.11 V vs. RHE), associated with a turnover frequency (TOF_CO ) of 2.7 s^-1 . Extending the photoelectrocatalysis to 10 h, a remarkable turnover number (TON_CO ) of 57000 was obtained. The high performance shown here is substantially improved from the previously reported photocathodes relying on covalently anchored catalysts.

Synthesis of cinnamils and quinoxalines and their biological evaluation as anticancer agents

We synthesized multiple cinnamils and quinoxalines to evaluate their anticancer activity. Cinnamils were used as precursors for quinoxalines via condensation with 1,2-diaminobenzene. Among the 26 synthesized compounds reported in this article, we found that cinnamil 3l exhibited its inhibitory effect with an IC50 value of 1.45 ± 0.98 μM, significantly higher than doxorubicin (8.5 ± 0.85 μM) against pancreatic cancer cells (PANC-1). Additionally, cinnamil 3l (IC50 10.98 ± 3.63 μM) showed less cytotoxicity than doxorubicin to Hs68 cells (0.92 ± 1.11 μM). The colony formation assay demonstrated that 3l obviously decreased the PANC-1 cell viability, and Western blot assays confirmed that 3l markedly induced apoptosis of PANC-1 cells through Bax, Bcl-2, and caspase 3 signaling cascades. These results demonstrate that cinnamil 3l has great potential to be further developed as a promising chemotherapeutic agent for pancreatic cancer.

Molecular Engineering of CoII Porphyrins with Asymmetric Architecture for Improved Electrochemical CO2 Reduction

The electrochemical reduction of carbon dioxide (CO₂ ) based on molecular catalysts has attracted more attention, owing to their well-defined active sites and rational structural design. Metal porphyrins (PorMs) have the extended π-conjugated backbone with different transition metals, endowing them with unique CO₂ reduction properties. However, few works focus on the investigation of symmetric architecture of PorMs as well as their aggregation behavior to CO₂ reduction. In this work, a series of Co^II porphyrins (PorCos) with symmetric and asymmetric substituents were used as model of molecular catalysts for CO₂ reduction. Owing to the electron donating effect of 2,6-dimethylbenzene (DMB), bandgaps of the complexes became narrower with the increasing number of DMB. As electrocatalysts, all PorCos exhibited promising electrocatalytic CO₂ reduction performance. Among the three molecules, asymmetric Co^II porphyrin (as-PorCo) showed the lowest onset potential of -288 mV and faradaic efficiencies exceeding 93 % at -0.6 V vs. reversible hydrogen electrode, which is highly competitive among the reported state-of-art porphyrin-based electrocatalysts. The CO₂ reduction performance depended on π-π stacking between PorCo with carbon nanotubes (CNTs) and adjacent PorCos, which could be readily controlled by atomically positioned DMB in PorCo. Density functional theory calculations also suggested that the charge density between PorCo and CNT was highest due to the weak steric hindrance in as-PorCo, providing the new insight into molecular design of catalysts for efficient electrochemical CO₂ reduction.

Immobilization strategies for porphyrin-based molecular catalysts for the electroreduction of CO2

The ever-growing level of carbon dioxide (CO2) in our atmosphere, is at once a threat and an opportunity. The development of sustainable and cost-effective pathways to convert CO2 to value-added chemicals is central to reducing its atmospheric presence. Electrochemical CO2 reduction reactions (CO2RRs) driven by renewable electricity are among the most promising techniques to utilize this abundant resource; however, in order to reach a system viable for industrial implementation, continued improvements to the design of electrocatalysts is essential to improve the economic prospects of the technology. This review summarizes recent developments in heterogeneous porphyrin-based electrocatalysts for CO2 capture and conversion. We specifically discuss the various chemical modifications necessary for different immobilization strategies, and how these choices influence catalytic properties. Although a variety of molecular catalysts have been proposed for CO2RRs, the stability and tunability of porphyrin-based catalysts make their use particularly promising in this field. We discuss the current challenges facing CO2RRs using these catalysts and our own solutions that have been pursued to address these hurdles.

Porous silver microrods by plasma vulcanization activation for enhanced electrocatalytic carbon dioxide reduction

Metal electrode is considered as an ideal candidate for electrocatalytic carbon dioxide (CO₂) reduction considering its excellent chemical stability, application potential and eco-friendly properties. Optimization process such as morphological control, non-metallic doping, alloying is widely studied to improve the efficiency of metal electrodes. In this work, we successfully improved the CO₂ reduction performance of silver using a facile plasma vulcanization treatment. The obtained sulfide derived silver (Ag) porous microrods (SD-AgPMRs) are optimized from both morphology and composition aspects, and demonstrates high Faradaic efficiency and partial current density for carbon monoxide (CO) production at low potentials. The larger specific surface area of porous microrod structure and the improved adsorption energy of important intermediates in comparison with Ag foil are realized by introduction of sulfur (S) atoms after plasma vulcanization activation, as suggested by density functional theory (DFT) calculations. This work presents a novel strategy to optimize metal electrocatalysts for CO₂ reduction as well as to improve catalysis in other fields.

Energy Band Alignment and Redox-Active Sites in Metalloporphyrin-Spaced Metal-Catechol Frameworks for Enhanced CO2 Photoreduction

Two new chemically stable metalloporphyrin-bridged metal-catechol frameworks, InTCP-Co and FeTCP-Co, were constructed to achieve artificial photosynthesis without additional sacrificial agents and photosensitizers. The CO₂ photoreduction rate over FeTCP-Co considerably exceeds that obtained over InTCP-Co, and the incorporation of uncoordinated hydroxyl groups, associated with catechol, into the network further promotes the photocatalytic activity. The iron-oxo coordination chain assists energy band alignment and provides a redox-active site, and the uncoordinated hydroxyl group contributes to the visible-light absorptance, charge-carrier transfer, and CO₂ -scaffold affinity. With a formic acid selectivity of 97.8 %, FeTCP-OH-Co affords CO₂ photoconversion with a reaction rate 4.3 and 15.7 times higher than those of FeTCP- Co and InTCP-Co, respectively. These findings are also consistent with the spectroscopic study and DFT calculation.

Molecular Triad Containing a TEMPO Catalyst Grafted on Mesoporous Indium Tin Oxide as a Photoelectrocatalytic Anode for Visible Light-Driven Alcohol Oxidation

Photoelectrochemical cells based on semiconductors are among the most studied methods of artificial photosynthesis. This study concerns the immobilization, on a mesoporous conducting indium tin oxide electrode (nano-ITO), of a molecular triad (NDADI-P-Ru-TEMPO) composed of a ruthenium tris-bipyridine complex (Ru) as photosensitizer, connected at one end to 2,2,6,6-tetramethyl-1-piperidine N-oxyl (TEMPO) as alcohol oxidation catalyst and at the other end to the electron acceptor naphthalenedicarboxyanhydride dicarboximide (NDADI). Light irradiation of NDADI-P-Ru-TEMPO grafted to nano-ITO in a pH 10 carbonate buffer effects selective oxidation of para-methoxybenzyl alcohol (MeO-BA) to para-methoxybenzaldehyde with a TON of approximately 150 after 1 h of photolysis at a bias of 0.4 V vs. SCE. The faradaic efficiency is found to be of 80±5 %. The photophysical study indicates that photoinduced electron transfer from the Ru complex to NDADI is a slow process and must compete with direct electron injection into ITO to have a better performing system. This work sheds light on some of the important ways to design more efficient molecular systems for the preparation of photoelectrocatalytic cells based on catalyst-dye-acceptor arrays immobilized on conducting electrodes.

Hybridization of Molecular and Graphene Materials for CO2 Photocatalytic Reduction with Selectivity Control

In the quest for designing efficient and stable photocatalytic materials for CO₂ reduction, hybridizing a selective noble-metal-free molecular catalyst and carbon-based light-absorbing materials has recently emerged as a fruitful approach. In this work, we report about Co quaterpyridine complexes covalently linked to graphene surfaces functionalized by carboxylic acid groups. The nanostructured materials were characterized by X-ray photoemission spectroscopy, X-ray absorption spectroscopy, IR and Raman spectroscopies, high-resolution transmission electron microscopy and proved to be highly active in the visible-light-driven CO₂ catalytic conversion in acetonitrile solutions. Exceptional stabilities (over 200 h of irradiation) were obtained without compromising the selective conversion of CO₂ to products (>97%). Most importantly, complete selectivity control could be obtained upon adjusting the experimental conditions: production of CO as the only product was achieved when using a weak acid (phenol or trifluoroethanol) as a co-substrate, while formate was exclusively obtained in solutions of mixed acetonitrile and triethanolamine.

Mechanistic Insights into Co and Fe Quaterpyridine-Based CO2 Reduction Catalysts: Metal-Ligand Orbital Interaction as the Key Driving Force for Distinct Pathways

Both [Co^II(qpy)(H₂O)₂]²⁺ and [Fe^II(qpy)(H₂O)₂]²⁺ (with qpy = 2,2':6',2″:6'',2‴-quaterpyridine) are efficient homogeneous electrocatalysts and photoelectrocatalysts for the reduction of CO₂ to CO. The Co catalyst is more efficient in the electrochemical reduction, while the Fe catalyst is an excellent photoelectrocatalyst ( ACS Catal. 2018, 8, 3411-3417). This work uses density functional theory to shed light on the contrasting catalytic pathways. While both catalysts experience primarily ligand-based reductions, the second reduction in the Co catalyst is delocalized onto the metal via a metal-ligand bonding interaction, causing a spin transition and a distorted ligand framework. This orbital interaction explains the experimentally observed mild reduction potential and slow kinetics of the second reduction. The decreased hardness and doubly occupied d_z²-orbital facilitate a σ-bond with the CO₂-π* in an η¹-κC binding mode. CO₂ binding is only possible after two reductions resulting in an EEC mechanism (E = electron transfer, C = chemical reaction), and the second protonation is rate-limiting. In contrast, the Fe catalyst maintains a Lewis acidic metal center throughout the reduction process because the metal orbitals do not strongly mix with the qpy-π* orbitals. This allows binding of the activated CO₂ in an η²-binding mode. This interaction stabilizes the activated CO₂ via a π-type interaction of a Fe-t_2g orbital and the CO₂-π* and a dative bond of the oxygen lone pair. This facilitates CO₂ binding to a singly reduced catalyst resulting in an ECE mechanism. The barrier for CO₂ addition and the second protonation are higher than those for the Co catalyst and rate-limiting.

Powering the next industrial revolution: transitioning from nonrenewable energy to solar fuels via CO2 reduction

Solar energy has been used for decades for the direct production of electricity in various industries and devices; however, harnessing and storing this energy in the form of chemical bonds has emerged as a promising alternative to fossil fuel combustion. The common feedstocks for producing such solar fuels are carbon dioxide and water, yet only the photoconversion of carbon dioxide presents the opportunity to generate liquid fuels capable of integrating into our existing infrastructure, while simultaneously removing atmospheric greenhouse gas pollution. This review presents recent advances in photochemical solar fuel production technology. Although efforts in this field have created an incredible number of methods to convert carbon dioxide into gaseous and liquid fuels, these can generally be classified under one of four categories based on how incident sunlight is utilised: solar concentration for thermoconversion (Category 1), transformation toward electroconversion (Category 2), natural photosynthesis for bioconversion (Category 3), and artificial photosynthesis for direct photoconversion (Category 4). Select examples of developments within each of these categories is presented, showing the state-of-the-art in the use of carbon dioxide as a suitable feedstock for solar fuel production.

Solar energy has been used for decades for the direct production of electricity in various industries and devices. However, harnessing and storing this energy in the form of chemical bonds has emerged as a promising alternative to fossil fuels.

Recent Advances on Metalloporphyrin-Based Materials for Visible-Light-Driven CO2 Reduction

Photocatalytic CO₂ reduction is a promising technology to mitigate environmental issue and the energy crisis. The four nitrogen atoms in the porphyrin ring can incorporate transition metals to form stable active sites for CO₂ activation and photoreduction. Nevertheless, the photocatalytic efficiency of metalloporphyrins is still low due to the insufficient photoelectron injection to drive CO₂ photoreduction upon visible light irradiation. To address this issue, considerable efforts have been made to introduce photosensitizers for constructing homogeneous or heterogeneous metalloporphyrin-based photocatalytic systems. In this Review, recent advances of metalloporphyrin-based materials for visible-light-driven CO₂ reduction were summarized. The methods for the modulation of photosensitizing process at molecular level were presented for the promotion of photocatalytic performance. The mechanism of CO₂ activation and photocatalytic conversion was illustrated. Better insight into the structure-activity relationship provides guidance to the design of metalloporphyrin-related photocatalytic systems.

Molecular quaterpyridine-based metal complexes for small molecule activation: water splitting and CO2 reduction

This tutorial describes recent developments in the use of metal quaterpyridine complexes as electrocatalysts and photocatalysts for water splitting and CO₂ reduction.