Reaction kinetics and interplay of two different surface states on hematite photoanodes for water oxidation

Subtraction Descriptors in Machine Learning for Optimizing the Cocatalyst Effect of Cobalt Phosphate on Hematite Photoanodes

In the quest for sustainable energy solutions, the optimization of the photoelectrochemical (PEC) performance of hematite photoanodes through cocatalysts represents a promising avenue. This study introduces a novel machine learning approach, leveraging subtraction descriptors, to isolate and quantify the specific effects of cobalt phosphate (Co-Pi) as a cocatalyst on hematite's PEC performance. By integrating data from various analytical techniques, including photoelectrochemical impedance spectroscopy and ultraviolet-visible spectroscopy, with advanced machine learning models, we successfully predicted the PEC performance enhancement attributed to Co-Pi. The Gaussian process regression (GPR) model emerged as the most effective, revealing the critical influence of the interfacial resistance, bulk resistance, and interfacial capacitance on the PEC performance. These findings underscore the potential of cocatalysts in improving charge separation and extending charge carrier lifetimes, thereby boosting the efficiency of photocatalytic reactions. This study not only advances our understanding of the cocatalyst effect in photocatalytic systems but also demonstrates the power of machine learning in modifying complex materials and guiding the development of optimized photocatalytic materials. The implications of this research extend beyond hematite photoanodes, offering a generalizable framework for enhancing the photoelectrochemical properties of a wide range of material modifications such as cocatalyst deposition, doping, and passivation.

Hematite Hollow-Sphere-Array Photoanodes for Efficient Photoelectrochemical Water Splitting

Constructing 3D nanophotonic structures is regarded as an effective method to realize efficient solar-to-hydrogen conversion. These photonic structures can enhance the absorbance of photoelectrodes by the light trapping effect, promote the charge separation by designable charge transport pathway and provide a high specific surface area for catalytic reaction. However, most 3D structures reported so far mainly focused on the influence of light absorption and lacked a systematic investigation of the overall water splitting process. Herein, hematite hollow-sphere-array photoanodes are fabricated through a facile hydrothermal method with polystyrene templates. Validating by simulations and experiments, the hollow sphere array is proved to enhance the efficiency of light harvesting, charge separation and surface reaction at the same time. With an additional annealing treatment in oxygen, a photocurrent density of 2.26 mA cm-2 at 1.23 V versus reversible hydrogen electrode can be obtained, which is 3.70 times larger than that with a planar structure in otherwise the same system. This work gains an insight into the photoelectrochemical water splitting process, which is valuable for the further design of advancing solar driven water splitting devices.

Solar-driven highly selective conversion of glycerol to dihydroxyacetone using surface atom engineered BiVO4 photoanodes

Dihydroxyacetone is the most desired product in glycerol oxidation reaction because of its highest added value and large market demand among all possible oxidation products. However, selectively oxidative secondary hydroxyl groups of glycerol for highly efficient dihydroxyacetone production still poses a challenge. In this study, we engineer the surface of BiVO4 by introducing bismuth-rich domains and oxygen vacancies (Bi-rich BiVO4-x) to systematically modulate the surface adsorption of secondary hydroxyl groups and enhance photo-induced charge separation for photoelectrochemical glycerol oxidation into dihydroxyacetone conversion. As a result, the Bi-rich BiVO4-x increases the glycerol oxidation photocurrent density of BiVO4 from 1.42 to 4.26 mA cm-2 at 1.23 V vs. reversible hydrogen electrode under AM 1.5 G illumination, as well as the dihydroxyacetone selectivity from 54.0% to 80.3%, finally achieving a dihydroxyacetone production rate of 361.9 mmol m-2 h-1 that outperforms all reported values. The surface atom customization opens a way to regulate the solar-driven organic transformation pathway toward a carbon chain-balanced product.

Combined Effect of Underlayer and Deposition Solution to Optimize the Alignment of Hematite Photoanodes

This study investigates the optimization of hematite (α-Fe2O3) photoanodes for enhanced photoelectrochemical (PEC) performance and reproducibility, which are crucial for photocatalytic applications. Despite hematite's potential, hindered by inherent limitations, significant improvements were realized by introducing a titanium dioxide (TiO2) underlayer and ethanol-modified deposition. The influence of the deposition methods was understood by potential-dependent photoelectrochemical impedance spectroscopy analysis. The introduction of the TiO2 underlayer effectively increased the density of states, preferable for the electron transport in the bulk hematite, and the ethanol deposition on a TiO2 underlayer led to a stable surface state formation (S1 state) for the photoexcited hole transfer. This analysis illuminated the intricate interplay between electron transport in the bulk and photogenerated hole transfer at the solution interface, thereby facilitating smoother charge transfer. These findings underscore the viability of surface engineering and meticulous process optimization in addressing critical challenges in photocatalyst development.

Nanoconfinement Enables Photoelectrochemical Selective Oxidation of Glycerol via the Microscale Fluid Effect

The glycerol oxidation reaction (GOR) run with photoelectrochemical cells (PECs) is one of the most promising ways to upgrade biomass because it is thermodynamically favorable, while irreversible overoxidation leads to unsatisfactory product selectivities. Herein, a tunable one-dimensional nanoconfined environment was introduced into the GOR process, which accelerated mass transfer of glycerol via the microscale fluid effect and changed the main oxidation product from formic acid (FA) to glyceraldehyde (GLD), which led to retention of the heavier multicarbon products. The rate of glycerol diffusion in the nanochannels increased by a factor of 4.92 with decreasing inner diameters. The main product from the PEC-selective oxidation of glycerol changed from the C1 product FA to the C3 product GLD with a great selectivity of 60.7%. This work provides a favorable approach for inhibiting further oxidation of multicarbon products and illustrates the importance of microenvironmental regulation in biomass oxidation.

Bias distribution and regulation in photoelectrochemical overall water-splitting cells

The water oxidation half-reaction at anodes is always considered the rate-limiting step of overall water splitting (OWS), but the actual bias distribution between photoanodes and cathodes of photoelectrochemical (PEC) OWS cells has not been investigated systematically. In this work, we find that, for PEC cells consisting of photoanodes (nickel-modified n-Si [Ni/n-Si] and α-Fe2O3) with low photovoltage (Vph < 1 V), a large portion of applied bias is exerted on the Pt cathode for satisfying the hydrogen evolution thermodynamics, showing a thermodynamics-controlled characteristic. In contrast, for photoanodes (TiO2 and BiVO4) with Vph > 1 V, the bias required for cathode activation can be significantly reduced, exhibiting a kinetics-controlled characteristic. Further investigations show that the bias distribution can be regulated by tuning the electrolyte pH and using alternative half-reaction couplings. Accordingly, a volcano plot is presented for the rational design of the overall reactions and unbiased PEC cells. Motivated by this, an unbiased PEC cell consisting of a simple Ni/n-Si photoanode and Pt cathode is assembled, delivering a photocurrent density of 5.3 ± 0.2 mA cm-2.

Supramolecular catalyst with [FeCl4] unit boosting photoelectrochemical seawater splitting via water nucleophilic attack pathway

Propelled by the structure of water oxidation co-catalysts in natural photosynthesis, molecular co-catalysts have long been believed to possess the developable potential in artificial photosynthesis. However, the interfacial complexity between light absorber and molecular co-catalyst limits its structural stability and charge transfer efficiency. To overcome the challenge, a supramolecular scaffold with the [FeCl4] catalytic units is reported, which undergo a water-nucleophilic attack of the water oxidation reaction, while the supramolecular matrix can be in-situ grown on the surface of photoelectrode through a simple chemical polymerization to be a strongly coupled interface. A well-defined BiVO4 photoanode hybridized with [FeCl4] units in polythiophene reaches 4.72 mA cm-2 at 1.23 VRHE, which also exhibits great stability for photoelectrochemical seawater splitting due to the restraint on chlorine evolution reaction by [FeCl4] units and polythiophene. This work provides a novel solution to the challenge of the interface charge transfer of molecular co-catalyst hybridized photoelectrode.

Balancing charge recombination and hole transfer rates in hematite photoanodes by modulating the Co2+/Fe3+ sites in the OER cocatalyst

This work investigates the roles of Co and Fe sites in a composite cocatalyst on the performance of hematite photoanodes for photoelectrochemical (PEC) water splitting. The cobalt/iron-based composite (Co-Fe-O) cocatalyst, consisting of adjustable Co2+/Fe3+ratios, was synthesized using a one-step hydrothermal method. It reveals that Co2+ sites with a robust capacity for low-bias hole capture, which is insignificantly affected by partial substitution by Fe3+, decelerate the charge recombination process. However, it also leads to a slower charge transfer, with slower oxygen-evolution kinetics on Co sites than on Fe sites. Consequently, the modulation of the Co2+/Fe3+ ratio facilitates the redistribution of surface strap states, striking a delicate balance between charge recombination and charge transfer rates. This optimization led to the highest low-bias photocurrent density of 1.6 mA cm-2 at 1.0 V vs. RHE (a 2.4-fold increase) for the cocatalyst with a Co2+/Fe3+ ratio of 1:2 (CoFe2O4 nanoparticles). Additionally, the cocatalyst with a Co2+/Fe3+ ratio of 1:4 (mixture of CoFe2O4 and Fe2O3 nanoparticles, demonstrated an impressive high-bias photocurrent density of 3.8 mA cm-2 at 1.6 V vs. RHE (a 2.3-fold increase). This study emphasizes the promising potential of modulating active sites within a cocatalyst to achieve efficient PEC water splitting on a hematite-based photoanode.

Understanding the reaction mechanism and kinetics of photocatalytic oxygen evolution on CoOx-loaded bismuth vanadate

Photocatalytic water splitting for green hydrogen production is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Loading a co-catalyst is essential for accelerating the kinetics, but the detailed reaction mechanism and role of the co-catalyst are still obscure. Here, we focus on cobalt oxide (CoOx) loaded on bismuth vanadate (BiVO4) to investigate the impact of CoOx on the OER mechanism. We employ photoelectrochemical impedance spectroscopy and simultaneous measurements of photoinduced absorption and photocurrent. The reduction of V5+ in BiVO4 promotes the formation of a surface state on CoOx that plays a crucial role in the OER. The third-order reaction rate with respect to photohole charge density indicates that reaction intermediate species accumulate in the surface state through a three-electron oxidation process prior to the rate-determining step. Increasing the excitation light intensity onto the CoOx-loaded anode improves the photoconversion efficiency significantly, suggesting that the OER reaction at dual sites in an amorphous CoOx(OH)y layer dominates over single sites. Therefore, CoOx is directly involved in the OER by providing effective reaction sites, stabilizing reaction intermediates, and improving the charge transfer rate. These insights help advance our understanding of co-catalyst-assisted OER to achieve efficient water splitting.

Covalent organic frameworks bearing Ni active sites for free radical-mediated photoelectrochemical organic transformations

Photoelectrochemical (PEC) organic transformations occurring at anodes are a promising strategy for circumventing the sluggish kinetics of the oxygen evolution reaction. Here, we report a free radical-mediated reaction instead of direct hole transfer occurring at the solid/liquid interface for PEC oxidation of benzyl alcohol (BA) to benzaldehyde (BAD) with high selectivity. A bismuth vanadate (BiVO4) photoanode coated with a 2,2'-bipyridine-based covalent organic framework bearing single Ni sites (Ni-TpBpy) was developed to drive the transformation. Experimental studies reveal that the reaction at the Ni-TpBpy/BiVO4 photoanode followed first-order reaction kinetics, boosting the formation of surface-bound ·OH radicals, which suppressed further BAD oxidation and provided a nearly 100% selectivity and a rate of 80.63 μmol hour-1 for the BA-to-BAD conversion. Because alcohol-to-aldehyde conversions are involved in the valorizations of biomass and plastics, this work is expected to open distinct avenues for producing key intermediates of great value.

Quantitative Determination the Role of the Intrabandgap States in Water Photooxidation over Hematite Electrodes

The intrabandgap states on the hematite (α-Fe2O3) electrodes are believed to play an important role in water photooxidation. Yet, it is not fully understood how the intrabandgap states are involved in the reaction. In this work, the intraband-gap states in water photooxidation on α-Fe2O3 electrodes are investigated by a combination of multiple (photo-) electrochemical techniques and operando spectroscopic methods. Two kinds of surface states are observed on the electrodes during water photooxidation, and their roles are quantitatively determined by the correlation with the steady-state photocurrent. It is demonstrated that the intrinsic electronic surface state close to the conduction band can act only as the recombination center for the photocarriers. However, the photogenerated surface state closer to the valence band is revealed to be the reactant in the rate-determining step in oxygen evolution reaction. These findings may be beneficial to elucidate the actual function of the surface states and provide insights into the kinetic and mechanism studies of water photooxidation on the α-Fe2O3 electrodes.

Determining the Transformation Kinetics of Water Oxidation Intermediates on Hematite Photoanode

The oxygen evolution reaction (OER) from water is a sequential oxidation reaction process, involved in transformation of multiple reaction intermediates. For photo(electro)catalytic OER, revealing the intermediates transformation kinetics is quite challenging due to its coupling with photogenerated charge dynamics. Herein, we specifically study the transformation kinetics of the OER intermediates in rationally thin hematite photoanodes through increasing the ratio between surface intermediates and photogenerated charges in bulk. We directly identify the formation and consumption kinetics of one-hole OER intermediate (FeIV═O) in photoelectrochemical water oxidation using operando transient absorption (TA) spectroscopy. The microsecond formation kinetics of the FeIV═O species are sensitively changed by the excitation mode of Fe2O3. The subsecond consumption kinetics are closely dependent on surface FeIV═O species density, demonstrating that the cooperation of FeIV═O intermediates is the key to accelerating water oxidation kinetics on the Fe2O3 surface. This work provides insight into understanding and controlling water oxidation reaction kinetics on Fe2O3 surface.

Surface Oxygen Species in Metal Oxide Photoanodes for Solar Energy Conversion

Converting and storing solar energy directly as chemical energy through photoelectrochemical devices are promising strategies to replace fossil fuels. Metal oxides are commonly used as photoanode materials, but they still encounter challenges such as limited light absorption, inefficient charge separation, sluggish surface reactions, and insufficient stability. The regulation of surface oxygen species on metal oxide photoanodes has emerged as a critical strategy to modulate molecular and charge dynamics at the reaction interface. However, the precise role of surface oxygen species in metal oxide photoanodes remains ambiguous. The review focuses on elucidating the formation and regulation mechanisms of various surface oxygen species in metal oxides, their advantages and disadvantages in photoelectrochemical reactions, and the characterization methods employed to investigate them. Additionally, the article discusses emerging opportunities and potential hurdles in the regulation of surface oxygen species. By shedding light on the significance of surface oxygen species, this review aims to advance our understanding of their impact on metal oxide photoanodes, paving the way for the design of more efficient and stable photoelectrochemical devices.

Effect of acid treatment on boosting the photoelectrochemical performance of doped and codoped α-Fe2O3 photoanodes

Acid treatment of Ti-doped α-Fe₂O₃ photoanode can reduce the onset potential and promote the photocurrent density for photoelectrochemical (PEC) water splitting reaction. However, the inner mechanism of how this occurs has not yet been clarified. This report compares the effect of HCl hydrothermal treatment on α-Fe₂O₃ photoanodes doped with Ge, Pt, Ti, and Sn or codoped with TiGe, TiPt, and TiSn. The findings show that the promotion effect of HCl hydrothermal treatment was far less significant on the Ge-, Pt-, and Sn-doped α-Fe₂O₃ than on the Ti-doped one. In contrast, the codoped photoanodes could realize a lift in the photocurrent of up to 39% at 1.23 V_RHE (versus the reversible hydrogen electrode) and a reduction in the potential onset by ∼60 mV after HCl hydrothermal treatment. Anatase TiO₂ was detected by Raman spectroscopy on the Ti-doped α-Fe₂O₃ with adequate treatment in HCl solution. Thus, the performance promotion by acid treatment was ascribed to the surface-concentrated Ti-O bonds acting as a passivation layer that could increase the charge-capture capacity and reduce the charge-transfer resistance, as demonstrated by the potential-modulated electrochemical impedance spectroscopy results. HCl treatment of the in situ-doped α-Fe₂O₃ and an excessive treatment time for the ex situ-doped α-Fe₂O₃ caused an inhibition in the PEC performance, which could be attributed to the adverse effect of lattice defects induced by acid corrosion. The application scope of HCl treatment on the doped α-Fe₂O₃ was determined by revealing its working mechanism.

Density Functional Theory Approximations and Experimental Investigations on Co1-xMoxTe2 Alloy Electrocatalysts Tuning the Overall Water Splitting Reactions

Understanding the relationship between electronic structure, surface characteristic, and reaction process of a catalyst helps to architect proficient electrodes for sustainable energy development. The highly active and stable catalysts made of earth-abundant materials provide a great endeavor toward green hydrogen production. Herein, we assembled the Co_1-xMo_xTe (x = 0-1) nanoarray structures into a bifunctional electrocatalyst to achieve high-performance hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) kinetics under alkaline conditions. The designed Co_0.75Mo_0.25Te and Co_0.50Mo_0.50 electrocatalysts require minimum overpotential and Tafel slope for high-efficacy HER and OER, respectively. Furthermore, we constructed a Co_0.50Mo_0.50Te₂∥Co_0.50Mo_0.50Te₂ device for overall water splitting with an overpotential of 1.39 V to achieve a current density of 10 mA cm^-2, which is superior to noble electrocatalyst performance, with stable reaction throughout the 50 h continuous process. Density functional theory approximations and Gibbs free energy calculations validate the enhanced water splitting reaction catalyzed by the Co_0.50Mo_0.50Te₂ nanoarrays. The partial replacement of Co atoms with Mo atoms in the Co_0.50Mo_0.50Te₂ structure substantially enhances the water electrolysis kinetics through the synergistic effects between the combined metal atoms and the bonded chalcogen.

Unconventional rate law of water photooxidation at TiO2 electrodes

Photoelectrochemical oxidation of water over semiconductors is a promising route for the production of sustainable solar fuels. TiO₂ water photooxidation has been intensively studied over the past 50 years, but its rate law and mechanism are still undetermined. The main challenges are that there is no appropriate reaction kinetic model currently, and that both the reaction rate constant and reactant photohole concentration/density are not readily quantified with respect to conventional chemical reactions. Here we report that the rate law and photohole transfer mechanism could be determined by a combination of multiple (photo-) electrochemical techniques. We demonstrate that the kinetics of TiO₂ water oxidation by photogenerated holes can be well-described by a model of surface state mediating charge transfer and recombination. The rate law, in terms of steady-state photocurrent, is the product of the surface hole density exponential dependent rate constant and the surface hole density, with first order for all the surface hole densities studied. This reactant concentration dependent rate constant is conceptually unexpected for an elementary step in conventional chemical reactions. In addition, we find that hydroxyl ions in bulk solutions are involved in the reaction as indicated by observation of the solution pH dependent apparent rate constant. This study may thus lead to key insights both for strategies to evaluate and/or enhance photoelectrochemical performances and for understanding reaction mechanisms.

Electrolyte Engineering Stabilizes Photoanodes Decorated with Molecular Catalysts

Molecular catalysts are promising oxygen evolution promoters in conjunction with photoanodes for solar water splitting. Maintaining the stability of both photoabsorber and cocatalyst is still a prime challenge, with many efforts tackling this issue through sophisticated material designs. Such approaches often mask the importance of the electrode-electrolyte interface and overlook easily tunable system parameters, such as the electrolyte environment, to improve efficiency. We provide a systematic study on the activity-stability relationship of a prominent Fe₂ O₃ photoanode modified with Ir molecular catalysts using in situ mass spectroscopy. After gaining detailed insights into the dissolution behavior of the Ir cocatalyst, a comprehensive pH study is conducted to probe the impact of the electrolyte on the performance. An inverse trend in Fe and Ir stability is found, with the best activity-stability synergy obtained at pH 9.7. The results bring awareness to the overall photostability and electrolyte engineering when advancing catalysts for solar water splitting.

Nontrivial Topological Surface States in Ru3 Sn7 toward Wide pH-Range Hydrogen Evolution Reaction

Nontrivial topological surface states (TSSs), which possess extraordinary carrier mobility and are protected by the bulk symmetry, have emerged as an innovative platform to search for efficient electrocatalysts toward hydrogen evolution reaction (HER). Here, a Sn-based nontrivial metal Ru₃ Sn₇ is prepared using electrical arc melting method. The results indicate that the (001) crystal family of Ru₃ Sn₇ possesses nontrivial TSSs with linear dispersion relation and large nontrivial energy window. Experimental and theoretical results demonstrate that nontrivial TSSs of Ru₃ Sn₇ can significantly boost charge transfer kinetics and optimize adsorption of hydrogen intermediates due to bulk symmetry-protected band structures. As expected, nontrivial Ru₃ Sn₇ exhibits superior HER activity to Ru, Pt/C, and trivial counterparts (e.g., Ru₂ Sn₃ , IrSn₂ , and Rh₃ Sn₂ ) with higher ratios of noble metals. Furthermore, the wide pH-range activity of topologically nontrivial Ru₃ Sn₇ implies the robustness of its TSSs against pH variation during the HER. These findings provide a promising approach to the rational design of topologically nontrivial metals as highly efficient electrocatalysts.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Manipulating the surface states of BiVO4 through electrochemical reduction for enhanced PEC water oxidation

Bismuth vanadate (BiVO₄) is a prospective candidate for photoelectrochemical (PEC) water oxidation, but its commercial application is limited due to the serious surface charge recombination. In this work, we propose a novel and effective electrochemical reduction strategy combined with co-catalyst modification to manipulate the surface states of the BiVO₄ photoanode. Specifically, an ultrathin amorphous structure is formed on the surface of BiVO₄ after electrochemical reduction ascribed to the breaking of the surface metal-O bonds. Photoelectrochemical measurements and first-principles calculation show that the electrochemical reduction treatment can effectively reduce the surface energy, thereby passivating the recombined surface states (r-ss) and increasing the mobility of photogenerated holes. In addition, the FeOOH co-catalyst layer further increases the intermediate surface states (i-ss) of BiVO₄, stabilizes the surface structure and enhances its PEC performance. Benefiting from the superior charge transfer efficiency and the excellent water oxidation kinetics, the -0.8/BVO/Fe photoanode achieves 2.02 mA cm^-2 photocurrent at 1.23 V_RHE (2.4 times that of the original BiVO₄); meanwhile, the onset potential shifts 90 mV to the cathode. These results provide a new surface engineering tactic to modify the surface states of semiconductor photoanodes for high-efficiency PEC water oxidation.

Enabling high low-bias performance of Fe2O3 photoanode for photoelectrochemical water splitting

Fe₂O₃ is a promising photoanode material used for photoelectrochemical water splitting due to its narrow bandgap and excellent stability in solution. However, because the nanorods shrink and coalesce when annealed under high temperatures, the charge separation and injection efficiencies are suppressed in the conventional nanocoral Fe₂O₃, resulting in its high bias potential and low photocurrent density. Herein, by improving the radial growth of FeOOH precursor, highly dispersed Fe₂O₃ nanorods could be prepared. It enabled them to have sufficient light-harvesting and short charge transport distance, high light absorption and charge separation/injection efficiencies, increased photocurrent density and reduced onset potential V_on. The optimized Fe₂O₃ photoanodes obtained a remarkable low-bias photocurrent density of 0.84 mA cm^-2 at 1.0 V versus reversible hydrogen electrode (vs. RHE). It was further improved to 1.36 mA cm^-2 at 1.0 V vs. RHE with the V_on reduced to 0.50 V vs. RHE when post-treated with a solvothermal method and loaded with NiOOH/FeOOH cocatalysts. The applied bias photo-to-current conversion efficiency was maximized to 0.45% at 0.84 V vs. RHE.

On the origin of multihole oxygen evolution in haematite photoanodes

The oxygen evolution reaction (OER) plays a crucial role in (photo)electrochemical devices that use renewable energy to produce synthetic fuels. Recent measurements on semiconducting oxides have found a power law dependence of the OER rate on surface hole density, suggesting a multihole mechanism. In this study, using transient photocurrent measurements, density functional theory simulations and microkinetic modelling, we have uncovered the origin of this behaviour in haematite. We show here that the OER rate has a third-order dependence on the surface hole density. We propose a mechanism wherein the reaction proceeds by accumulating oxidizing equivalents through a sequence of one-electron oxidations of surface hydroxy groups. The key O–O bond formation step occurs by the dissociative chemisorption of a hydroxide ion involving three oxyl sites. At variance with the case of metallic oxides, the activation energy of this step is weakly dependent on the surface hole coverage, leading to the observed power law.

Optimized NiFe-Based Coordination Polymer Catalysts: Sulfur-Tuning and Operando Monitoring of Water Oxidation

In-depth insights into the structure-activity relationships and complex reaction mechanisms of oxygen evolution reaction (OER) electrocatalysts are indispensable to efficiently generate clean hydrogen through water electrolysis. We introduce a convenient and effective sulfur heteroatom tuning strategy to optimize the performance of active Ni and Fe centers embedded into coordination polymer (CP) catalysts. Operando monitoring then provided the mechanistic understanding as to how exactly our facile sulfur engineering of Ni/Fe-CPs optimizes the local electronic structure of their active centers to facilitate dioxygen formation. The high OER activity of our optimized S-R-NiFe-CPs outperforms the most recent NiFe-based OER electrocatalysts. Specifically, we start from oxygen-deprived O_d-R-NiFe-CPs and transform them into highly active Ni/Fe-CPs with tailored sulfur coordination environments and anionic deficiencies. Our operando X-ray absorption spectroscopy analyses reveal that sulfur introduction into our designed S-R-NiFe-CPs facilitates the formation of crucial highly oxidized Ni⁴⁺ and Fe⁴⁺ species, which generate oxygen-bridged Ni^IV-O-Fe^IV moieties that act as the true OER active intermediates. The advantage of our sulfur-doping strategy for enhanced OER is evident from comparison with sulfur-free O_d-R-NiFe-CPs, where the formation of essential high-valent OER intermediates is hindered. Moreover, we propose a dual-site mechanism pathway, which is backed up with a combination of pH-dependent performance data and DFT calculations. Computational results support the benefits of sulfur modulation, where a lower energy barrier enables O-O bond formation atop the S-Ni^IV-O-Fe^IV-O moieties. Our convenient anionic tuning strategy facilitates the formation of active oxygen-bridged metal motifs and can thus promote the design of flexible and low-cost OER electrocatalysts.

Revealing the Essential Role of Iron Phosphide and its Surface-Evolved Species in the Photoelectrochemical Water Oxidation by Gd-Doped Hematite Photoanode

Phosphates are easily derived from transition metal phosphides under natural conditions, and the real roles of these two in catalytic reactions are not yet clear. Here, a multiphase FeP/Gd-Fe₂ O₃ shell-core structure photoanode was constructed and explored regarding the real role of FeP and its surface-reconstructed iron phosphate (Fe-Pi) in photoelectrochemical water oxidation. The FeP/Gd-Fe₂ O₃ photoanode exhibited an excellent photocurrent density of 2.56 mA cm^-2 at 1.23 V versus the reversible hydrogen electrode, up to 4 times greater than those of the pristine α-Fe₂ O₃ (0.64 mA cm^-2 ). Detailed studies showed that FeP could act as a photosensitizer to enhance light absorption and as a conductive layer to accelerate charge transfer. The FeP significantly enhanced the incident photon-to-current conversion efficiency of the photoanode and improved the electron transition within the photoanode. Naturally evolved Fe-Pi on the surface provided more active sites for water oxidation. They effectively passivated the surface capture state and synergistically inhibited the electron-hole recombination. Moreover, the in-situ constructed multiphase catalyst had a smaller interfacial contact resistance than the intentionally decorative cocatalyst. This work provides new insight into the understanding of the essential role of transition metal phosphides and their surface-reconstructed species in catalytic reactions.

Time-Resolved Vibrational and Electronic Spectroscopy for Understanding How Charges Drive Metal Oxide Catalysts for Water Oxidation

Temporally resolved spectroscopy is a powerful approach for gaining detailed mechanistic understanding of water oxidation at robust Earth-abundant metal oxide catalysts for guiding efficiency improvement of solar fuel conversion systems. Beyond detecting and structurally identifying surface intermediates by vibrational and accompanying optical spectroscopy, knowledge of how charges, sequentially delivered to the metal oxide surface, drive the four-electron water oxidation cycle is critical for enhancing catalytic efficiency. Key issues addressed in this Perspective are the experimental requirements for establishing the kinetic relevancy of observed surface species and the discovery of the rate-boosting role of encounters of two or more one-electron surface hole charges, often in the form of randomly hopping metal oxo or oxyl moieties, for accessing very low-barrier O-O bond-forming pathways. Recent spectroscopic breakthroughs of metal oxide photo- and electrocatalysts inspire future research poised to take advantage of new highly sensitive spectroscopic tools and of methods for fast catalysis triggering.

Surface State-Assisted Delayed Photocurrent Response of Au Nanocluster/TiO2 Photoelectrodes

Gold nanoclusters (NCs) can be used as sensitizers to extend the absorption capabilities of TiO₂ as photoelectrodes. However, the adsorption of NCs also creates additional surface states on the TiO₂ surface, which gives rise to intricacies in the understanding of various interfacial phenomena occurring in NC-sensitized TiO₂. One of the complexities that have recently been discovered is the size-dependent hole-transfer mechanism. In this work, we reveal another anomalous behavior in the hole-transfer process that the hole scavenging ability of the electrolyte also plays a role in determining the hole-transfer mechanism in the NC-TiO₂ system, which is unprecedented in other photoelectrode systems. In the presence of an efficient hole scavenger (Na₂SO₃), the hole transfer in Au₁₈-TiO₂ occurs directly through the highest occupied molecular orbital (HOMO) of Au₁₈ NCs. However, in the presence of a less efficient hole scavenger (ethylenediaminetetraacetic acid), hole transfer in Au₁₈-TiO₂ does not occur through the HOMO and shifts to surface state-assisted hole transfer. Due to surface state charging, this surface state-assisted hole-transfer mechanism results in delayed photocurrent response in Au₁₈-TiO₂. Evidence for this exotic hole-transfer mechanism shift is provided by photoelectrochemical electrochemical impedance spectroscopy, and its implications are discussed.

Reaction Kinetics of Photoelectrochemical CO2 Reduction on a CuBi2O4-Based Photocathode

The CO₂ reduction reaction (CO₂RR) is an essential step in natural photosynthesis and artificial photosynthesis to provide carbohydrate foods and hydrocarbon energy in the carbon-neutral cycle. However, the current solar conversion efficiencies and/or product selectivity of the CO₂RR are very sluggish due to its complicated multiple-step charge transfer reactions. Here, we systematically investigate the charge transfer reaction rate during CO₂ reduction on CuBi₂O₄ photocathodes, where the surface is modified with 3-aminopropyltriethoxysilane (APTES). We discover that the surface amine group increases the charge separation rate, significantly enhancing the surface charge transfer reaction rate. However, the surface acidity has less influence on the first-order reaction, indicating that a rate-determining step (RDS) exists in the early stage of the photoelectrochemical cell (PEC) processes. Moreover, the intensity-modulated photocurrent spectroscopy (IMPS) confirms that both surface charge transfer and the recombination rate on APTES-coated CuBi₂O₄ are larger than bare CuBi₂O₄ while possessing comparable charge transfer efficiencies. Overall, the surface charge transfer reactions under the PEC condition require designing more effective nanostructured photoelectrodes and powerful characterization methods to intrinsically increase the charge separation and transfer rate while reducing the recombination rate.

Heterogeneity between and within Single Hematite Nanorods as Electrocatalysts for Oxygen Evolution Reaction

Understanding the structural nature of the active sites in electrocatalysis is central to discovering general design rules for better catalysts in fuel cells and electrolyzers. Nanostructures are widely used as electrocatalysts, but the location and structure of the active sites within the nanostructure are often unknown. This information is hidden in conventional bulk measurements due to ensemble averaging, hindering direct structure-activity correlation. Herein, we use a single-entity electrochemical approach to reveal the heterogeneity in electrocatalysts via scanning electrochemical cell microscopy (SECCM). Using hematite (α-Fe₂O₃) nanorods as the model catalyst for oxygen evolution reaction (OER), the electrocatalytic activity is measured at individual nanorods. Finer mapping within a single nanorod shows that the OER activity is consistently higher at the body portion vs the tip of the nanorod. Our results directly suggest the benefit of synthesizing longer hematite nanorods for better OER performance. The origin of the enhanced local activity is explained by the larger fraction of {001} facet exposed on the body compared to the tip. The finding goes beyond OER on hematite nanorods, highlighting the critical role of single-entity activity mapping and colocalized structural characterization in revealing active sites in electrocatalysis.

Identifying Water Oxidation Mechanisms at Pure and Titanium-Doped Hematite-Based Photoanodes with Spectroelectrochemistry

Investigation of the mechanism of the water oxidation reaction for hematite photoanodes has been one of the most persistently pursued topics in the course of understanding photoelectrochemical water splitting by transition metal oxides. Unfortunately, existing experimental techniques often require over-simplified models and theories that assume only one reaction path. In this work, however, it is proposed that water oxidation on hematite can proceed via mixed reaction paths according to spectroelectrochemical results without a priori assumptions. The true absorption signals of surface states responsible for water oxidation are isolated from subsidiary signals for undoped and Ti-doped hematite and contrasted with those of inactive species. The evolution of absorption signals as a function of applied potential and illumination intensity highlights the non-negligible contribution of direct hole transfer, especially for highly doped hematite.

Hematite Photoanodes for Water Oxidation: Electronic Transitions, Carrier Dynamics, and Surface Energetics

We review the current understanding of charge carriers in model hematite photoanodes at different stages. The origin of charge carriers is discussed based on the electronic structure and absorption features, highlighting the controversial assignment of the electronic transitions near the absorption edge. Next, the dynamic evolution of charge carriers is analyzed both on the ultrafast and on the surface reaction timescales, with special emphasis on the arguable spectroscopic assignment of electrons/holes and their kinetics. Further, the competitive charge transfer centers at the solid-liquid interface are reviewed, and the chemical nature of relevant surface states is updated. Finally, an overview on the function of widely employed surface cocatalysts is given to illustrate the complex influence of physiochemical modifications on the charge carrier dynamics. The understanding of charge carriers from their origin all the way to their interfacial transfer is vital for the future of photoanode design.

Water oxidation kinetics of nanoporous BiVO4 photoanodes functionalised with nickel/iron oxyhydroxide electrocatalysts

In this work, spectroelectrochemical techniques are employed to analyse the catalytic water oxidation performance of a series of three nickel/iron oxyhydroxide electrocatalysts deposited on FTO and BiVO₄, at neutral pH. Similar electrochemical water oxidation performance is observed for each of the FeOOH, Ni(Fe)OOH and FeOOHNiOOH electrocatalysts studied, which is found to result from a balance between degree of charge accumulation and rate of water oxidation. Once added onto BiVO₄ photoanodes, a large enhancement in the water oxidation photoelectrochemical performance is observed in comparison to the un-modified BiVO₄. To understand the origin of this enhancement, the films were evaluated through time-resolved optical spectroscopic techniques, allowing comparisons between electrochemical and photoelectrochemical water oxidation. For all three catalysts, fast hole transfer from BiVO₄ to the catalyst is observed in the transient absorption data. Using operando photoinduced absorption measurements, we find that water oxidation is driven by oxidised states within the catalyst layer, following hole transfer from BiVO₄. This charge transfer is correlated with a suppression of recombination losses which result in remarkably enhanced water oxidation performance relative to un-modified BiVO₄. Moreover, despite similar electrocatalytic behaviour of all three electrocatalysts, we show that variations in water oxidation performance observed among the BiVO₄/MOOH photoanodes stem from differences in photoelectrochemical and electrochemical charge accumulation in the catalyst layers. Under illumination, the amount of accumulated charge in the catalyst is driven by the injection of photogenerated holes from BiVO₄, which is further affected by the recombination loss at the BiVO₄/MOOH interface, and thus leads to deviations from their behaviour as standalone electrocatalysts.

Elucidating the role of charge accumulation and reaction kinetics in governing the performance of Ni/Fe oxyhydroxides as electrocatalysts and as co-catalysts on BiVO₄ photoanodes water oxidation.