High-temperature flexible WSe2 photodetectors with ultrahigh photoresponsivity

Flexible p-Type WSe2 Transistors with Alumina Top-Gate Dielectric

Tungsten diselenide (WSe2) field-effect transistors (FETs) are promising for emerging electronics because of their tunable polarity, enabling complementary transistor technology, and their suitability for flexible electronics through material transfer. In this work, we demonstrate flexible p-type WSe2 FETs with absolute drain currents |ID| up to 7 μA/μm. We achieve this by fabricating flexible top-gated FETs with a combined WSe2 and metal contact transfer approach using WSe2 grown by metal-organic chemical vapor deposition on sapphire. Despite moderate WSe2 crystal grain size, our devices show similar or higher |ID| and ID on/off ratio (∼105) compared to most devices with exfoliated single-crystal WSe2 from the literature. We analyze charge trapping in our devices using pulsed and bias stress measurements. Notably, the high |ID| values are preserved during pulsing, where charge trapping is minimized. Overall, we demonstrate a fabrication approach advantageous for high drain currents in flexible 2D transistors.

Wafer-Scale Vertical 1D GaN Nanorods/2D MoS2/PEDOT:PSS for Piezophototronic Effect-Enhanced Self-Powered Flexible Photodetectors

van der Waals (vdW) heterostructures constructed by low-dimensional (0D, 1D, and 2D) materials are emerging as one of the most appealing systems in next-generation flexible photodetection. Currently, hand-stacked vdW-type photodetectors are not compatible with large-area-array fabrication and show unimpressive performance in self-powered mode. Herein, vertical 1D GaN nanorods arrays (NRAs)/2D MoS2/PEDOT:PSS in wafer scale have been proposed for self-powered flexible photodetectors arrays firstly. The as-integrated device without external bias under weak UV illumination exhibits a competitive responsivity of 1.47 A W-1 and a high detectivity of 1.2 × 1011 Jones, as well as a fast response speed of 54/71 µs, thanks to the strong light absorption of GaN NRAs and the efficient photogenerated carrier separation in type-II heterojunction. Notably, the strain-tunable photodetection performances of device have been demonstrated. Impressively, the device at - 0.78% strain and zero bias reveals a significantly enhanced photoresponse with a responsivity of 2.47 A W-1, a detectivity of 2.6 × 1011 Jones, and response times of 40/45 µs, which are superior to the state-of-the-art self-powered flexible photodetectors. This work presents a valuable avenue to prepare tunable vdWs heterostructures for self-powered flexible photodetection, which performs well in flexible sensors.

New paradigms of 2D layered material self-driven photodetectors

By virtue of the high carrier mobility, diverse electronic band structures, excellent electrostatic tunability, easy integration, and strong light-harvesting capability, 2D layered materials (2DLMs) have emerged as compelling contenders in the realm of photodetection and ushered in a new era of optoelectronic industry. In contrast to powered devices, self-driven photodetectors boast a wealth of advantages, notably low dark current, superior signal-to-noise ratio, low energy consumption, and exceptional compactness. Nevertheless, the construction of self-driven 2DLM photodetectors based on traditional p-n, homo-type, or Schottky heterojunctions, predominantly adopting a vertical configuration, confronts insurmountable dilemmas such as intricate fabrication procedures, sophisticated equipment, and formidable interface issues. In recent years, worldwide researchers have been devoted to pursuing exceptional strategies aimed at achieving the self-driven characteristics. This comprehensive review offers a methodical survey of the emergent paradigms toward self-driven photodetectors constructed from 2DLMs. Firstly, the burgeoning approaches employed to realize diverse self-driven 2DLM photodetectors are compiled, encompassing strategies such as strain modulation, thickness tailoring, structural engineering, asymmetric ferroelectric gating, asymmetric contacts (including work function, contact length, and contact area), ferroelectricity-enabled bulk photovoltaic effect, asymmetric optical antennas, among others, with a keen eye on the fundamental physical mechanisms that underpin them. Subsequently, the prevalent challenges within this research landscape are outlined, and the corresponding potential approaches for overcoming these obstacles are proposed. On the whole, this review highlights new device engineering avenues for the implementation of bias-free, high-performance, and highly integrated 2DLM optoelectronic devices.

Ultrahigh Responsivity and Robust Semiconducting Fiber Enabled by Molecular Soldering-Governed Defect Engineering for Smart Textile Optoelectronics

Semiconducting fibers (SCFs) are of significant interest to design next-generation wearable and comfortable optoelectronics that seamlessly integrate with textiles. However, the practical applications of current SCFs are always limited by poor optoelectronic performance and low mechanical robustness caused by uncontrollable multiscale structural defects. Herein, a versatile in situ molecular soldering-governed defect engineering strategy is proposed to construct ultrahigh responsivity and robust wet-spun MoS2 SCFs, by using a π-conjugated dithiolated molecule to simultaneously patch microscale sulfur vacancies within MoS2 nanosheets, diminish mesoscale interlayer voids/wrinkles, promote macroscale orientation, build long-range photoelectron percolation bridges, and provide n-doping effect. The derived MoS2 SCFs exhibit over two orders of magnitude higher responsivity (144.3 A W-1) than previously reported fiber photodetectors, 37.3-fold faster photoresponse speed (52 ms) than pristine counterpart, and remarkable bending robustness (retain 94.2% of the initial photocurrent after 50 000 bending-flattening cycles). Such superior robustness and photodetection capacity of MoS2 SCFs further enable large-scale weaving of reliable smart textile optoelectronic systems, such as direction-identifiable wireless light alarming system, modularized mechano-optical communication system, and indoor light-controlled IoT system. This work offers a universal strategy for the scalable production of mechanically robust and high-performance SCFs, opening up exciting possibilities for large-scale integration of wearable optoelectronics.

Rolling up 2D WSe2 Nanosheets to 1D Anisotropic Nanoscrolls for Polarization-Sensitive Photodetectors

The intrinsic low-symmetry crystal structures or external geometries of low-dimensional materials are crucial for polarization-sensitive photodetection. However, these inherently anisotropic materials are limited in variety, and their anisotropy is confined to specific crystal directions. Transforming 2D semiconductors, such as WSe2, from isotropic 2D nanosheets into anisotropic 1D nanoscrolls expands their application in polarization photodetection. Despite this considerable potential, research on polarization photodetection based on nanoscrolls remains scarce. Here, the uniform crystalline orientation of WSe2 nanoscrolls is achieved conveniently and efficiently by applying ethanol droplets to vapor deposition-grown bilayer WSe2 nanosheets. Angle-resolved polarized Raman spectroscopy of WSe2 nanoscrolls demonstrates vibrational anisotropy. Photodetectors based on these nanoscrolls show competitive overall performance with a broadband detection range from 405 to 808 nm, a competitive on/off ratio of ≈900, a high detectivity of 3.4 × 108 Jones, and a fast response speed of ≈30 ms. Additionally, WSe2 nanoscroll-based photodetectors exhibit strong polarization-sensitive detection with a maximum dichroic ratio of 1.5. More interestingly, due to high photosensitivity, the WSe2 nanoscroll detectors can easily record sequential puppy images. This work reveals the potential of WSe2 nanoscrolls as excellent polarization-sensitive photodetectors and provides new insights into the development of high-performance optoelectronic devices.

On-Demand Picoliter-Level-Droplet Inkjet Printing for Micro Fabrication and Functional Applications

With the advent of Internet of Things (IoTs) and wearable devices, manufacturing requirements have shifted toward miniaturization, flexibility, environmentalization, and customization. Inkjet printing, as a non-contact picoliter-level droplet printing technology, can achieve material deposition at the microscopic level, helping to achieve high resolution and high precision patterned design. Meanwhile, inkjet printing has the advantages of simple process, high printing efficiency, mask-free digital printing, and direct pattern deposition, and is gradually emerging as a promising technology to meet such new requirements. However, there is a long way to go in constructing functional materials and emerging devices due to the uncommercialized ink materials, complicated film-forming process, and geometrically/functionally mismatched interface, limiting film quality and device applications. Herein, recent developments in working mechanisms, functional ink systems, droplet ejection and flight process, droplet drying process, as well as emerging multifunctional and intelligence applications including optics, electronics, sensors, and energy storage and conversion devices is reviewed. Finally, it is also highlight some of the critical challenges and research opportunities. The review is anticipated to provide a systematic comprehension and valuable insights for inkjet printing, thereby facilitating the advancement of their emerging applications.

Centimeter-Scale Assembly of Fractal Organic Crystals with Crisscross Structures for Flexible Photosynapses

Fractal assembly technology enables scalable construction of organic crystal patterns for emerging nanoelectronics and optoelectronics. Here, a polymer-templating assembly strategy is presented for centimeter-scale patterned growth of fractal organic crystals (FOCs). These structures are formed by drop-coating perylene solution directly onto a gelatin-modified surface, resulting in the formation of crisscross fractal patterns. By adjusting the tilt angle of the template, the morphology of FOCs can be effectively controlled, with the diameter distribution of each level branch ranging from hundreds to ten micrometers. The planar FOC device exhibits flexible photoreception and photosynaptic capabilities, with a high specific detectivity of 1.35 × 109 Jones and paired-pulse facilitation (PPF) index of 104%, withstanding a 0.5 cm bending radius during bending test. These findings present a reliable route for large-scale assembly of flexible organic crystalline materials toward neuromorphic electronics.

Enhancing 2D Photonics and Optoelectronics with Artificial Microstructures

By modulating subwavelength structures and integrating functional materials, 2D artificial microstructures (2D AMs), including heterostructures, superlattices, metasurfaces and microcavities, offer a powerful platform for significant manipulation of light fields and functions. These structures hold great promise in high-performance and highly integrated optoelectronic devices. However, a comprehensive summary of 2D AMs remains elusive for photonics and optoelectronics. This review focuses on the latest breakthroughs in 2D AM devices, categorized into electronic devices, photonic devices, and optoelectronic devices. The control of electronic and optical properties through tuning twisted angles is discussed. Some typical strategies that enhance light-matter interactions are introduced, covering the integration of 2D materials with external photonic structures and intrinsic polaritonic resonances. Additionally, the influences of external stimuli, such as vertical electric fields, enhanced optical fields and plasmonic confinements, on optoelectronic properties is analysed. The integrations of these devices are also thoroughly addressed. Challenges and future perspectives are summarized to stimulate research and development of 2D AMs for future photonics and optoelectronics.

Two-dimensional layered material photodetectors: what could be the upcoming downstream applications beyond prototype devices?

With distinctive advantages spanning excellent flexibility, rich physical properties, strong electrostatic tunability, dangling-bond-free surface, and ease of integration, 2D layered materials (2DLMs) have demonstrated tremendous potential for photodetection. However, to date, most of the research enthusiasm has been merely focused on developing novel prototype devices. In the past few years, researchers have also been devoted to developing various downstream applications based on 2DLM photodetectors to contribute to promoting them from fundamental research to practical commercialization, and extensive accomplishments have been realized. In spite of the remarkable advancements, these fascinating research findings are relatively scattered. To date, there is still a lack of a systematic and profound summarization regarding this fast-evolving domain. This is not beneficial to researchers, especially researchers just entering this research field, who want to have a quick, timely, and comprehensive inspection of this fascinating domain. To address this issue, in this review, the emerging downstream applications of 2DLM photodetectors in extensive fields, including imaging, health monitoring, target tracking, optoelectronic logic operation, ultraviolet monitoring, optical communications, automatic driving, and acoustic signal detection, have been systematically summarized, with the focus on the underlying working mechanisms. At the end, the ongoing challenges of this rapidly progressing domain are identified, and the potential schemes to address them are envisioned, which aim at navigating the future exploration as well as fully exerting the pivotal roles of 2DLMs towards the practical optoelectronic industry.

Flexible High-Temperature MoS2 Field-Effect Transistors and Logic Gates

High-temperature-resistant integrated circuits with excellent flexibility, a high integration level (nanoscale transistors), and low power consumption are highly desired in many fields, including aerospace. Compared with conventional SiC high-temperature transistors, transistors based on two-dimensional (2D) MoS2 have advantages of superb flexibility, atomic scale, and ultralow power consumption. However, MoS2 cannot survive at high temperature and drastically degrades above 200 °C. Here, we report MoS2 field-effect transistors (FETs) with top/bottom hexagonal boron nitride (h-BN) encapsulation and graphene electrodes. With the protection of the h-BN/h-BN structure, the devices can survive at much higher temperature (≥500 °C in air) than those of the MoS2 devices ever reported, which provides us an opportunity to explore the electrical properties and working mechanism of MoS2 devices at high temperature. Unlike the relatively low-temperature situation, the on/off ratio and subthreshold swing of MoS2 FETs show drastic variation at elevated temperature due to the injection of thermal emission carriers. Compared with metal electrode, devices with a graphene electrode demonstrate superior performance at high temperature (∼1-order-larger current on/off ratio, 3-7 times smaller subthreshold swing, and 5-9 times smaller threshold voltage shift). We further realize that the flexible CMOS NOT gate based on the above technique, and demonstrate logic computing at 550 °C. This work may stimulate the fundamental research of properties of 2D materials at high temperature, and also creates conditions for next-generation flexible harsh-environment-resistant integrated circuits.

Flexible and Stretchable Light-Emitting Diodes and Photodetectors for Human-Centric Optoelectronics

Optoelectronic devices with unconventional form factors, such as flexible and stretchable light-emitting or photoresponsive devices, are core elements for the next-generation human-centric optoelectronics. For instance, these deformable devices can be utilized as closely fitted wearable sensors to acquire precise biosignals that are subsequently uploaded to the cloud for immediate examination and diagnosis, and also can be used for vision systems for human-interactive robotics. Their inception was propelled by breakthroughs in novel optoelectronic material technologies and device blueprinting methodologies, endowing flexibility and mechanical resilience to conventional rigid optoelectronic devices. This paper reviews the advancements in such soft optoelectronic device technologies, honing in on various materials, manufacturing techniques, and device design strategies. We will first highlight the general approaches for flexible and stretchable device fabrication, including the appropriate material selection for the substrate, electrodes, and insulation layers. We will then focus on the materials for flexible and stretchable light-emitting diodes, their device integration strategies, and representative application examples. Next, we will move on to the materials for flexible and stretchable photodetectors, highlighting the state-of-the-art materials and device fabrication methods, followed by their representative application examples. At the end, a brief summary will be given, and the potential challenges for further development of functional devices will be discussed as a conclusion.

From Material to Cameras: Low-Dimensional Photodetector Arrays on CMOS

The last two decades have witnessed a dramatic increase in research on low-dimensional material with exceptional optoelectronic properties. While low-dimensional materials offer exciting new opportunities for imaging, their integration in practical applications has been slow. In fact, most existing reports are based on single-pixel devices that cannot rival the quantity and quality of information provided by massively parallelized mega-pixel imagers based on complementary metal-oxide semiconductor (CMOS) readout electronics. The first goal of this review is to present new opportunities in producing high-resolution cameras using these new materials. New photodetection methods and materials in the field are presented, and the challenges involved in their integration on CMOS chips for making high-resolution cameras are discussed. Practical approaches are then presented to address these challenges and methods to integrate low-dimensional material on CMOS. It is also shown that such integrations could be used for ultra-low noise and massively parallel testing of new material and devices. The second goal of this review is to present the colossal untapped potential of low-dimensional material in enabling the next-generation of low-cost and high-performance cameras. It is proposed that low-dimensional materials have the natural ability to create excellent bio-inspired artificial imaging systems with unique features such as in-pixel computing, multi-band imaging, and curved retinas.

2D Materials in Flexible Electronics: Recent Advances and Future Prospectives

Flexible electronics have recently gained considerable attention due to their potential to provide new and innovative solutions to a wide range of challenges in various electronic fields. These electronics require specific material properties and performance because they need to be integrated into a variety of surfaces or folded and rolled for newly formatted electronics. Two-dimensional (2D) materials have emerged as promising candidates for flexible electronics due to their unique mechanical, electrical, and optical properties, as well as their compatibility with other materials, enabling the creation of various flexible electronic devices. This article provides a comprehensive review of the progress made in developing flexible electronic devices using 2D materials. In addition, it highlights the key aspects of materials, scalable material production, and device fabrication processes for flexible applications, along with important examples of demonstrations that achieved breakthroughs in various flexible and wearable electronic applications. Finally, we discuss the opportunities, current challenges, potential solutions, and future investigative directions about this field.

Broadband Van-der-Waals Photodetector Driven by Ferroelectric Polarization

The potential for various future industrial applications has made broadband photodetectors beyond visible light an area of great interest. Although most 2D van-der-Waals (vdW) semiconductors have a relatively large energy bandgap (>1.2 eV), which limits their use in short-wave infrared detection, they have recently been considered as a replacement for ternary alloys in high-performance photodetectors due to their strong light-matter interaction. In this study, a ferroelectric gating ReS2 /WSe2 vdW heterojunction-channel photodetector is presented that successfully achieves broadband light detection (>1300 nm, expandable up to 2700 nm). The staggered type-II bandgap alignment creates an interlayer gap of 0.46 eV between the valence band maximum (VBMAX ) of WSe2 and the conduction band minimum (CBMIN ) of ReS2 . Especially, the control of poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) ferroelectric dipole polarity for a specific wavelength allows a high photoresponsivity of up to 6.9 × 103 A W-1 and a low dark current below 0.26 nA under the laser illumination with a wavelength of 405 nm in P-up mode. The achieved high photoresponsivity, low dark current, and full-range near infrared (NIR) detection capability open the door for next-generation photodetectors beyond traditional ternary alloy photodetectors.

Next-Generation Photodetectors beyond Van Der Waals Junctions

With the continuous advancement of nanofabrication techniques, development of novel materials, and discovery of useful manipulation mechanisms in high-performance applications, especially photodetectors, the morphology of junction devices and the way junction devices are used are fundamentally revolutionized. Simultaneously, new types of photodetectors that do not rely on any junction, providing a high signal-to-noise ratio and multidimensional modulation, have also emerged. This review outlines a unique category of material systems supporting novel junction devices for high-performance detection, namely, the van der Waals materials, and systematically discusses new trends in the development of various types of devices beyond junctions. This field is far from mature and there are numerous methods to measure and evaluate photodetectors. Therefore, it is also aimed to provide a solution from the perspective of applications in this review. Finally, based on the insight into the unique properties of the material systems and the underlying microscopic mechanisms, emerging trends in junction devices are discussed, a new morphology of photodetectors is proposed, and some potential innovative directions in the subject area are suggested.

Organic High-Temperature Synaptic Phototransistors for Energy-Efficient Neuromorphic Computing

Organic optoelectronic synaptic devices that can reliably operate in high-temperature environments (i.e., beyond 121°C) or remain stable after high-temperature treatments have significant potential in biomedical electronics and bionic robotic engineering. However, it is challenging to acquire this type of organic devices considering the thermal instability of conventional organic materials and the degradation of photoresponse mechanisms at high temperatures. Here, high-temperature synaptic phototransistors (HTSPs) based on thermally stable semiconductor polymer blends as the photosensitive layer are developed, successfully simulating fundamental optical-modulated synaptic characteristics at a wide operating temperature range from room temperature to 220°C. Robust optoelectronic performance can be observed in HTSPs even after experiencing 750 h of the double 85 testing due to the enhanced operational reliability. Using HTSPs, Morse-code optical decoding scheme and the visual object recognition capability are also verified at elevated temperatures. Furthermore, flexible HTSPs are fabricated, demonstrating an ultralow power consumption of 12.3 aJ per synaptic event at a low operating voltage of -0.05 mV. Overall, the conundrum of achieving reliable optical-modulated neuromorphic applications while balancing low power consumption can be effectively addressed. This research opens up a simple but effective avenue for the development of high-temperature and energy-efficient wearable optoelectronic devices in neuromorphic computing applications.

A mixed-dimensional quasi-1D BiSeI nanowire-2D GaSe nanosheet p-n heterojunction for fast response optoelectronic devices

Due to the unique combination configuration and the formation of a built-in electric field, mixed-dimensional heterojunctions present fruitful possibilities for improving the optoelectronic performances of low-dimensional optoelectronic devices. However, the response times of most photodetectors built from mixed-dimensional heterojunctions are within the millisecond range, limiting their applications in fast response optoelectronic devices. Herein, a mixed-dimensional BiSeI/GaSe van der Waals heterostructure is designed, which exhibits visible light detection ability and competitive photoresponsivity of 750 A W-1 and specific detectivity of 2.25 × 1012 Jones under 520 nm laser excitation. Excitingly, the device displays a very fast response time, e.g., the rise time and decay time under 520 nm laser excitation are 65 μs and 190 μs, respectively. Our findings provide a prospective approach to mixed-dimensional heterojunction photodetection devices with rapid switching capabilities.

Self-Powered Sb2Te3/MoS2 Heterojunction Broadband Photodetector on Flexible Substrate from Visible to Near Infrared

Van der Waals (vdWs) heterostructures, assembled by stacking of two-dimensional (2D) crystal layers, have emerged as a promising new material system for high-performance optoelectronic applications, such as thin film transistors, photodetectors, and light-emitters. In this study, we showcase an innovative device that leverages strain-tuning capabilities, utilizing a MoS₂/Sb₂Te₃ vdWs p-n heterojunction architecture designed explicitly for photodetection across the visible to near-infrared spectrum. These heterojunction devices provide ultra-low dark currents as small as 4.3 pA, a robust photoresponsivity of 0.12 A W^-1, and reasonable response times characterized by rising and falling durations of 0.197 s and 0.138 s, respectively. These novel devices exhibit remarkable tunability under the application of compressive strain up to 0.3%. The introduction of strain at the heterojunction interface influences the bandgap of the materials, resulting in a significant alteration of the heterojunction's band structure. This subsequently shifts the detector's optical absorption properties. The proposed strategy of strain-induced engineering of the stacked 2D crystal materials allows the tuning of the electronic and optical properties of the device. Such a technique enables fine-tuning of the optoelectronic performance of vdWs devices, paving the way for tunable high-performance, low-power consumption applications. This development also holds significant potential for applications in wearable sensor technology and flexible electro-optic circuits.

Efficient Avalanche Photodiodes with a WSe2/MoS2 Heterostructure via Two-Photon Absorption

Two-dimensional (2D) materials-based photodetectors in the infrared range hold the key to enabling a wide range of optoelectronics applications including infrared imaging and optical communications. While there exist 2D materials with a narrow bandgap sensitive to infrared photons, a two-photon absorption (TPA) process can also enable infrared photodetection in well-established 2D materials with large bandgaps such as WSe₂ and MoS₂. However, most of the TPA photodetectors suffer from low responsivity, preventing this method from being widely adopted for infrared photodetection. Herein, we experimentally demonstrate 2D materials-based TPA avalanche photodiodes achieving an ultrahigh responsivity. The WSe₂/MoS₂ heterostructure absorbs infrared photons with an energy smaller than the material bandgaps via a low-efficiency TPA process. The significant avalanche effect with a gain of ∼1300 improves the responsivity, resulting in the record-high responsivity of 88 μA/W. We believe that this work paves the way toward building practical and high-efficiency 2D materials-based infrared photodetectors.