Electrosynthesis of formamide from methanol and ammonia under ambient conditions

Valorization systems based on electrocatalytic nitrate/nitrite conversion for energy supply and valuable product synthesis

The excessive accumulation of nitrate/nitrite (NO x -) in surface and groundwater has severely disrupted the global nitrogen cycle and jeopardized public health. The electrochemical conversion of NO x - to ammonia (NH3) not only holds promise for ecofriendly NO x - removal, but also provides a green alternative to the energy-intensive Haber-Bosch process for NH3 production. Recently, in addition to the electrocatalyst design explosion in this field, many innovative valorization systems based on NO x --to-NH3 conversion have been developed for generating energy and expanding the range of value-added products. Collective knowledge of advanced conversion systems is indispensable for restoring the global nitrogen cycle and promoting a N-based economy. Herein, a timely and comprehensive review is provided on the important progress of valorization systems based on NO x - conversion, including waste treatment systems, novel electrolytic systems, and energy conversion and storage systems. Some mechanism explorations, device designs, key electrode developments and feasibility analyses are involved to gain deeper understanding of various systems and facilitate implementing these cleaning systems in industry. Finally, challenges and future prospects are outlined in the NO x - conversion field with an aim to promote large-scale electrocatalytic system development and prosperous N-based electrochemistry.

Long-chain surface-modified red-emitting carbon dots as fluorescent additives for 3D printing vat-photopolymerization

Carbon dots have recently attracted tremendous scientific attention thanks to their enhanced luminescence properties, photostability and low toxicity. In particular, red-emitting carbon dots (RCDs) are assuming increasing importance in biomedical applications, such as bio-imaging and phototherapy. At the same time, the possibility to create functional and complex objects by means of vat-photopolymerization-based three-dimensional (3D) printing techniques is continuously growing. This work describes the synthesis of long-chain surface-modified red emitting carbon dots, L-RCDs by esterification of RCDs, obtained from green reagents with a new solvothermal synthesis, and their employment as fluorescent additives in two formulations of photopolymerizable resins. The printing process proceeded smoothly in all cases, and red-emitting objects with different mechanical properties have been successfully obtained.

Tailoring O-Monodentate Adsorption of CO2 Initiates C-N Coupling for Efficient Urea Electrosynthesis with Ultrahigh Carbon Atom Economy

The thermodynamically and kinetically sluggish electrocatalytic C-N coupling from CO2 and NO3 - is inert to initially take place while typically occurring after CO2 protonation, which severely dwindles urea efficiency and carbon atom economy. Herein, we report a single O-philic adsorption strategy to facilitate initial C-N coupling of *OCO and subsequent protonation over dual-metal hetero-single-atoms in N2-Fe-(N-B)2-Cu-N2 coordination mode (FeN4/B2CuN2@NC), which greatly inhibits the formation of C-containing byproducts and facilitates urea electrosynthesis in an unprecedented C-selectivity of 97.1 % with urea yield of 2072.5 μg h-1 mgcat. -1 and 71.9 % Faradaic efficiency, outperforming state-of-the-art electrodes. The carbon-directed antibonding interaction with Cu-B is elaborated to benefit single O-philic adsorption of CO2 rather than conventional C-end or bridging O,O-end adsorption modes, which can accelerate the kinetics of initiated C-N coupling and protonation. Theoretical results indicate that the O-monodentate adsorption pathway benefits the thermodynamics of the C-N coupling of *OCO with *NO2 and the protonation rate-determining step, which markedly inhibits CO2 direct protonation. This oriented strategy of manipulating reactant adsorption patterns to initiate a specific step is universal to moderate oxophilic transition metals and offers a kinetic-enhanced path for multiple conversion processes.

Solar-Driven Sulfide Oxidation Paired With CO2 Reduction Based on Vacancies Engineering of Copper Selenide

Photovoltaic-driven electrochemical (PV-EC) carbon dioxide reduction (CO2R) coupled with sulfide oxidation (SOR) can efficiently convert the solar energy into chemical energy, expanding its applications. However, developing low-cost electrocatalysts that exhibit high selectivity and efficiency for both CO2R and SOR remains a challenge. Herein, a bifunctional copper selenide catalyst is developed with copper vacancies (v-CuSe2) for the CO2R-SOR. The Faradaic efficiency (FE) of 62.4% for methane at -200 mA cm-2 is achieved in the cathodic CO2R. In a two-electrode CO2R-SOR system with 16 h of long-term operation at a current density of 200 mA cm-2, an average Faradaic efficiency of 57.2% for methane and 97.7% for sulfur powder generation is achieved at cathode and anode, respectively. Compared to the coupling of CO2R with oxygen evolution reaction (OER), the energy efficiency (EE) of the CO2R-SOR system can be increased to 22.9%. The mechanism study has found that the synergistic effect of copper vacancies and introduced Se significantly enhances the selectivity toward methane. Driven by silicon solar cells, a solar-to-methane conversion efficiency of 2% is achieved.

Atomic-Scale Tailoring C-N Coupling Sites for Efficient Acetamide Electrosynthesis over Cu-Anchored Boron Nitride Nanosheets

Electrochemical conversion of carbon and nitrogen sources into valuable chemicals provides a promising strategy for mitigating CO2 emissions and tackling pollutants. However, efficiently scaling up C-N products beyond basic compounds like urea remains a significant challenge. Herein, we upgrade the C-N coupling for acetamide synthesis through coreducing CO and nitrate (NO3-) on atomic-scale Cu dispersed on boron nitride (Cu/BN) nanosheets. The specific form of Cu, such as single atom, nanocluster, and nanoparticles, endows Cu/BN different adsorption capacity for CO and NO3-, thereby dictating the catalytic activity and selectivity for acetamide formation. The Cu nanocluster-anchored BN (Cu NCs/BN) catalyst achieves an industrial-level current density of 178 mA cm-2 for the C-N coupling reaction and an average acetamide yield rate of 137.0 mmol h-1 gcat.-1 at -1.6 V versus the reversible hydrogen electrode. Experimental and theoretical analyses uncover the pivotal role of the strong electronic interaction between Cu nanoclusters and BN, which activates CO and NO3-, facilitates the formation of key *CCO and *NH2 intermediates, and expedites the C-N coupling pathway to acetamide. This work propels the development of atomic structure catalysts for the efficient conversion of small molecules to high-value chemicals through electrochemical processes.

Prospects of formamide as nitrogen source in biotechnological production processes

This review presents an analysis of formamide, focussing on its occurrence in nature, its functional roles, and its promising applications in the context of the bioeconomy. We discuss the utilization of formamide as an innovative nitrogen source achieved through metabolic engineering. These approaches underscore formamide's potential in supporting growth and production in biotechnological processes. Furthermore, our review illuminates formamide's role as a nitrogen source capable of safeguarding cultivation systems against contamination in non-sterile conditions. This attribute adds an extra layer of practicality to its application, rendering it an attractive candidate for sustainable and resilient industrial practices. Additionally, the article unveils the versatility of formamide as a potential carbon source that could be combined with formate or CO2 assimilation pathways. However, its attributes, i.e., enriched nitrogen content and comparatively limited energy content, led to conclude that formamide is more suitable as a co-substrate and that its use as a sole source of carbon for biomass and bio-production is limited. Through our exploration of formamide's properties and its applications, this review underscores the significance of formamide as valuable resource for a large spectrum of industrial applications. KEY POINTS: • Formidases enable access to formamide as source of nitrogen, carbon, and energy • The formamide/formamidase system supports non-sterile fermentation • The nitrogen source formamide supports production of nitrogenous compounds.

A Strongly Coupled Metal/Hydroxide Heterostructure Cascades Carbon Dioxide and Nitrate Reduction Reactions toward Efficient Urea Electrosynthesis

The direct coupling of nitrate ions and carbon dioxide for urea synthesis presents an appealing alternative to the Bosch-Meiser process in industry. The simultaneous activation of carbon dioxide and nitrate, however, as well as efficient C-N coupling on single active site, poses significant challenges. Here, we propose a novel metal/hydroxide heterostructure strategy based on synthesizing an Ag-CuNi(OH)2 composite to cascade carbon dioxide and nitrate reduction reactions for urea electrosynthesis. The strongly coupled metal/hydroxide heterostructure interface integrates two distinct sites for carbon dioxide and nitrate activation, and facilitates the coupling of *CO (on silver, where * denotes an active site) and *NH2 (on hydroxide) for urea formation. Moreover, the strongly coupled interface optimizes the water splitting process and facilitates the supply of active hydrogen atoms, thereby expediting the deoxyreduction processes essential for urea formation. Consequently, our Ag-CuNi(OH)2 composite delivers a high urea yield rate of 25.6 mmol gcat. -1 h-1 and high urea Faradaic efficiency of 46.1 %, as well as excellent cycling stability. This work provides new insights into the design of dual-site catalysts for C-N coupling, considering their role on the interface.

Molybdenum iron carbide-copper hybrid as efficient electrooxidation catalyst for oxygen evolution reaction and synthesis of cinnamaldehyde/benzalacetone

Oxygen evolution reaction (OER) is the efficiency limiting half-reaction in water electrolysis for green hydrogen production due to the 4-electron multistep process with sluggish kinetics. The electrooxidation of thermodynamically more favorable organics accompanied by CC coupling is a promising way to synthesize value-added chemicals instead of OER. Efficient catalyst is of paramount importance to fulfill such a goal. Herein, a molybdenum iron carbide-copper hybrid (Mo2C-FeCu) was designed as anodic catalyst, which demonstrated decent OER catalytic capability with low overpotential of 238 mV at response current density of 10 mA cm-2 and fine stability. More importantly, the Mo2C-FeCu enabled electrooxidation assisted aldol condensation of phenylcarbinol with α-H containing alcohol/ketone in weak alkali electrolyte to selective synthesize cinnamaldehyde/benzalacetone at reduced potential. The hydroxyl and superoxide intermediate radicals generated at high potential are deemed to be responsible for the electrooxidation of phenylcarbinol and aldol condensation reactions to afford cinnamaldehyde/benzalacetone. The current work showcases an electrochemical-chemical combined CC coupling reaction to prepare organic chemicals, we believe more widespread organics can be synthesized by tailored electrochemical reactions.

Energy-Saving Ambient Electrosynthesis of Nylon-6 Precursor Coupled with Electrocatalytic Upcycling of Polyethylene Terephthalate

Cyclohexanone oxime is an important intermediate in the chemical industry, especially for the manufacture of nylon-6. The traditional cyclohexanone oxime production strongly relies on cyclohexanone-hydroxylamine and cyclohexanone ammoxidation processes, which require harsh reaction conditions and consume considerable amounts of energy. Herein, direct electrosynthesis of cyclohexanone oxime is reported from environmental pollutants nitrite and cyclohexanone with almost 100% yield by using low-cost Cu2Se nanosheets as electrocatalysts. Combination of in situ Fourier transform infrared spectroscopy and theoretical calculations verifies that the p-d orbital hybridization between Cu and Se elements could synergistically optimize the surface electronic structure and enable improved adsorption and formation of the key active N intermediate NH2OH*, thereby enhancing cyclohexanone/nitrite-to-cyclohexanone oxime conversion over the Cu2Se nanosheets. Based on these, an efficient asymmetric co-electrolysis system is further demonstrated by coupling cyclohexanone/nitrite-to-cyclohexanone oxime conversion with the upcycling of polyethylene terephthalate plastics, achieveing energy-saving simultaneously production of value-added products (cyclohexanone oxime and glycolic acid).

Selective Electrooxidation of Crude Glycerol to Lactic Acid Coupled With Hydrogen Production at Industrially-Relevant Current Density

Transforming glycerol (GLY, biodiesel by-product) into lactic acid (LA, biodegradable polymer monomer) through sustainable electrocatalysis presents an effective strategy to reduce biodiesel production costs and consequently enhance its applications. However, current research faces a trade-off between achieving industrially-relevant current density (>300 mA cm-2) and high LA selectivity (>80%), limiting technological advancement. Herein, a Au3Ag1 alloy electrocatalyst is developed that demonstrates exceptional LA selectivity (85%) under high current density (>400 mA cm-2). The current density can further reach 1022 mA cm-2 at 1.2 V versus RHE, superior to most previous reports for GLY electrooxidation. It is revealed that the Au3Ag1 alloy can enhance GLY adsorption and reactive oxygen species (OH*) generation, thereby significantly boosting activity. As a proof of concept, a homemade flow electrolyzer is constructed, achieving remarkable LA productivity of 68.9 mmol h-1 at the anode, coupled with efficient H2 production of 3.5 L h-1 at the cathode. To further unveil the practical possibilities of this technology, crude GLY extracted from peanut oil into LA is successfully transformed, while simultaneously producing H2 at the cathode. This work showcases a sustainable method for converting biodiesel waste into high-value products and hydrogen fuel, promoting the broader application of biodiesel.

Selective Synthesis of Organonitrogen Compounds via Electrochemical C-N Coupling on Atomically Dispersed Catalysts

The C-N coupling reaction demonstrates broad application in the fabrication of a wide range of high value-added organonitrogen molecules including fertilizers (e.g., urea), chemical feedstocks (e.g., amines, amides), and biomolecules (e.g., amino acids). The electrocatalytic C-N coupling pathways from waste resources like CO2, NO3-, or NO2- under mild conditions offer sustainable alternatives to the energy-intensive thermochemical processes. However, the complex multistep reaction routes and competing side reactions lead to significant challenges regarding low yield and poor selectivity toward large-scale practical production of target molecules. Among diverse catalyst systems that have been developed for electrochemical C-N coupling reactions, the atomically dispersed catalysts with well-defined active sites provide an ideal model platform for fundamental mechanism elucidation. More importantly, the intersite synergy between the active sites permits the enhanced reaction efficiency and selectivity toward target products. In this Review, we systematically assess the dominant reaction pathways of electrocatalytic C-N coupling reactions toward various products including urea, amines, amides, amino acids, and oximes. To guide the rational design of atomically dispersed catalysts, we identify four key stages in the overall reaction process and critically discuss the corresponding catalyst design principles, namely, retaining NOx/COx reactants on the catalyst surface, regulating the evolution pathway of N-/C- intermediates, promoting C-N coupling, and facilitating final hydrogenation steps. In addition, the advanced and effective theoretical simulation and characterization technologies are discussed. Finally, a series of remaining challenges and valuable future prospects are presented to advance rational catalyst design toward selective electrocatalytic synthesis of organonitrogen molecules.

Advances in electrocatalytic dehydrogenation of ethylamine to acetonitrile

The electrocatalytic dehydrogenation of ethylamine (EDH), owing to its high hydrogen content, holds broad prospects in electrochemical hydrogen (H2) production, H2 storage, and addressing energy issues, thus deserving wide attention. In this feature article, we first summarized the fundamentals of thermocatalytic and electrocatalytic EDH and reviewed the recent state-of-the-art advances in catalyst research, specifically platinum group metal (PGM) catalysts and non-PGM catalysts. We systematically discussed the potential applications of electrocatalytic EDH in energy storage and conversion. Finally, we provide our perspective on the key challenges and future developments in this field. We believe this feature article will offer helpful guidance for oriented design and optimization of stable and efficient catalysts for electrocatalytic EDH and related energy applications.

Electrocatalytic Upgrading of Plastic and Biomass-Derived Polyols to Formamide under Ambient Conditions

Electrocatalytic upgrading of wasted plastic and renewable biomass represents a sustainable method to produce chemicals but is limited to carbohydrates, leaving other value-added chemicals, such as organonitrogen compounds, being scarcely explored. Herein, we reported an electrocatalytic oxidation strategy to transform polyethylene terephthalate (PET) plastic-derived ethylene glycol (EG) and biomass-derived polyols into formamide, in the presence of ammonia (NH3) over a tungsten oxide (WO3) catalyst. Taking EG-to-formamide as an example, we achieved a high formamide productivity of 537.7 μmol cm-2 h-1 with FE of 43.2 % at a constant current of 100 mA cm-2 in a flow electrolyzer with 12-h test, representing a more advantageous performance compared with previous reports for formamide electrosynthesis. Mechanistic understanding revealed that the cleavage of the C-C bond in the EG was facilitated by nucleophilic attack of in situ formed nitrogen radicals from NH3, with resultant C-N bond construction and eventually formamide production. Furthermore, this strategy can be extended to transformation of PET bottle and a series of biomass-derived polyols with carbon number from three (glycerol) to six (glucose), producing formamide with high efficiencies. This work demonstrates a sustainable upgrading strategy of plastic and biomass that may have implications to more value-added chemicals production beyond carbohydrates.

Sustainable Electrosynthesis of N,N-Dimethylformamide via Relay Catalysis on Synergistic Active Sites

Electrified synthesis of high-value organonitrogen chemicals from low-cost carbon- and nitrogen-based feedstocks offers an economically and environmentally appealing alternative to traditional thermocatalytic methods. However, the intricate electrochemical reactions at electrode surfaces pose significant challenges in controlling selectivity and activity, especially for producing complex substances such as N,N-dimethylformamide (DMF). Herein, we tackle this challenge by developing relay catalysis for efficient DMF production using a composite WO2-NiOOH/Ni catalyst with two distinctive active sites. Specifically, WO2 selectively promotes dimethylamine (DMA) electrooxidation to produce strongly surface-bound (CH3)2N*, while nearby NiOOH facilitates methanol electrooxidation to yield more weakly bound *CHO. The disparity in binding energetics of the key C- and N-intermediates expedites C-N coupling at the WO2-NiOOH interface. In situ infrared spectroscopy with isotope-labeling experiments, quasi-in situ electron paramagnetic resonance trapping experiments, and electrochemical operating experiments revealed the C-N coupling mechanism and enhanced DMF-synthesis selectivity and activity. In situ X-ray absorption spectroscopy (XAS) and postreaction transmission electron microscopy (TEM) studies verified the stability of WO2-NiOOH/Ni during extended electrochemical operation. A Faradaic efficiency of ∼50% and a production rate of 438 μmol cm-2 h-1 were achieved at an industrially relevant current density of 100 mA cm-2 over an 80 h DMF production period. This study introduces a new paradigm for developing electrothermo relay catalysis for the sustainable and efficient synthesis of valuable organic chemicals with industrial potential.

Electrocatalytic water-to-oxygenates conversion: redox-mediated versus direct oxygen transfer

Electrocatalytic oxygenation of hydrocarbons with high selectivity has attracted much attention for its advantages in the sustainable and controllable production of oxygenated compounds with reduced greenhouse gas emissions. Especially when utilizing water as an oxygen source, by constructing a water-to-oxygenates conversion system at the anode, the environment and/or energy costs of producing oxygenated compounds and hydrogen energy can be significantly reduced. There is a broad consensus that the generation and transformation of oxygen species are among the decisive factors determining the overall efficiency of oxygenation reactions. Thus, it is necessary to elucidate the oxygen transfer process to suggest more efficient strategies for electrocatalytic oxygenation. Herein, we introduce oxygen transfer routes through redox-mediated pathways or direct oxygen transfer methods. Especially for the scarcely investigated direct oxygen transfer at the anode, we aim to detail the strategies of catalyst design targeting the efficient oxygen transfer process including activation of organic substrate, generation/adsorption of oxygen species, and transformation of oxygen species for oxygenated compounds. Based on these examples, the significance of balancing the generation and transformation of oxygen species, tuning the states of organic substrates and intermediates, and accelerating electron transfer for organic activation for direct oxygen transfer has been elucidated. Moreover, greener organic synthesis routes through heteroatom transfer and molecular fragment transfer are anticipated beyond oxygen transfer.

High yield electrosynthesis of oxygenates from CO using a relay Cu-Ag co-catalyst system

As a sustainable alternative to fossil fuel-based manufacture of bulk oxygenates, electrochemical synthesis using CO and H2O as raw materials at ambient conditions offers immense appeal. However, the upscaling of the electrosynthesis of oxygenates encounters kinetic bottlenecks arising from the competing hydrogen evolution reaction with the selective production of ethylene. Herein, a catalytic relay system that can perform in tandem CO capture, activation, intermediate transfer and enrichment on a Cu-Ag composite catalyst is used for attaining high yield CO-to-oxygenates electrosynthesis at high current densities. The composite catalyst Cu/30Ag (molar ratio of Cu to Ag is 7:3) enables high efficiency CO-to-oxygenates conversion, attaining a maximum partial current density for oxygenates of 800 mA cm-2 at an applied current density of 1200 mA cm-2, and with 67 % selectivity. The ability to finely control the production of ethylene and oxygenates highlights the principle of efficient catalyst design based on the relay mechanism.

Electrocatalytic functional group conversion-based carbon resource upgrading

The conversions of carbon resources, such as alcohols, aldehydes/ketones, and ethers, have been being one of the hottest topics most recently for the goal of carbon neutralization. The emerging electrocatalytic upgrading has been regarded as a promising strategy aiming to convert carbon resources into value-added chemicals. Although exciting progress has been made and reviewed recently in this area by mostly focusing on the explorations of valuable anodic oxidation or cathodic reduction reactions individually, however, the reaction rules of these reactions are still missing, and how to purposely find or rationally design novel but efficient reactions in batches is still challenging. The properties and transformations of key functional groups in substrate molecules play critically important roles in carbon resources conversion reactions, which have been paid more attention to and may offer hidden keys to achieve the above goal. In this review, the properties of functional groups are addressed and discussed in detail, and the reported electrocatalytic upgrading reactions are summarized in four categories based on the types of functional groups of carbon resources. Possible reaction pathways closely related to functional groups will be summarized from the aspects of activation, cleavage and formation of chemical bonds. The current challenges and future opportunities of electrocatalytic upgrading of carbon resources are discussed at the end of this review.

Electrochemical Nitrate Reduction: Ammonia Synthesis and the Beyond

Natural nitrogen cycle has been severely disrupted by anthropogenic activities. The overuse of N-containing fertilizers induces the increase of nitrate level in surface and ground waters, and substantial emission of nitrogen oxides causes heavy air pollution. Nitrogen gas, as the main component of air, has been used for mass ammonia production for over a century, providing enough nutrition for agriculture to support world population increase. In the last decade, researchers have made great efforts to develop ammonia processes under ambient conditions to combat the intensive energy consumption and high carbon emission associated with the Haber-Bosch process. Among different techniques, electrochemical nitrate reduction reaction (NO3RR) can achieve nitrate removal and ammonia generation simultaneously using renewable electricity as the power, and there is an exponential growth of studies in this research direction. Here, a timely and comprehensive review on the important progresses of electrochemical NO3RR, covering the rational design of electrocatalysts, emerging CN coupling reactions, and advanced energy conversion and storage systems is provided. Moreover, future perspectives are proposed to accelerate the industrialized NH3 production and green synthesis of chemicals, leading to a sustainable nitrogen cycle via prosperous N-based electrochemistry.

Electrochemical hydrogenation and oxidation of organic species involving water

Fossil fuel-driven thermochemical hydrogenation and oxidation using high-pressure H2 and O2 are still popular but energy-intensive CO2-emitting processes. At present, developing renewable energy-powered electrochemical technologies, especially those using clean, safe and easy-to-handle reducing agents and oxidants for organic hydrogenation and oxidation reactions, is urgently needed. Water is an ideal carrier of hydrogen and oxygen. Electrochemistry provides a powerful route to drive water splitting under ambient conditions. Thus, electrochemical hydrogenation and oxidation transformations involving water as the hydrogen source and oxidant, respectively, have been developed to be mild and efficient tools to synthesize organic hydrogenated and oxidized products. In this Review, we highlight the advances in water-participating electrochemical hydrogenation and oxidation reactions of representative organic molecules. Typical electrode materials, performance metrics and key characterization techniques are firstly introduced. General electrocatalyst design principles and controlling the microenvironment for promoting hydrogenation and oxygenation reactions involving water are summarized. Furthermore, paired hydrogenation and oxidation reactions are briefly introduced before finally discussing the challenges and future opportunities of this research field.

Merging electrocatalytic alcohol oxidation with C-N bond formation by electrifying metal-ligand cooperative catalysts

Electrification of thermal chemical processes could play an important role in creating a more energy efficient chemical sector. Here we demonstrate that a range of MLC catalysts can be successfully electrified and used for imine formation from alcohol precursors, thus demonstrating the first example of molecular electrocatalytic C-N bond formation.This novel concept allowed energy efficiency to be increased by an order of magnitude compared to thermal catalysis. Molecular EAO and the electrification of homogeneous catalysts can thus contribute to current efforts for the electrocatalytic generation of C-N bonds from simple building blocks.

Formamide Electrosynthesis from Methanol and Ammonia in Water over Pr-Doped MnO2

A rare earth element doping strategy is reported to boost the activity and enhance the stability of MnO2 for selective formamide production through electrocatalytic oxidation coupling (EOC) of methanol and ammonia. MnO2 doped with 1% Pr was selected as the best candidate with an optimized formamide yield of 211.32 μmol cm-2 h-1, a Faradaic efficiency of 22.63%, and a stability of more than 50 h. The easier formation of Mn6+ species and the lower dissolution rate of Mn species over Pr-doped MnO2 revealed by in situ Raman spectra were responsible for the boosted formamide production and enhanced stability. In addition, a two-electrode flow electrolyzer was developed to integrate EOC with C2H2 semihydrogenation for simultaneously producing value-added products in both the anode and cathode.

Electrochemical Reversible Reforming between Ethylamine and Acetonitrile on Heterostructured Pd-Ni(OH)2 Nanosheets

Rational design of electrocatalysts is essential to achieve desirable performance of electrochemical synthesis process. Heterostructured catalysts have thus attracted widespread attention due to their multifunctional intrinsic properties, and diverse catalytic applications with corresponding outstanding activities. Here, we report an in situ restoration strategy for the synthesis of ultrathin Pd-Ni(OH)2 nanosheets. Such Pd-Ni(OH)2 nanosheets exhibit excellent activity and selectivity towards reversible electrochemical reforming of ethylamine and acetonitrile. In the acetonitrile reduction process, Pd acts as reaction center, while Ni(OH)2 provide proton hydrogen through promoting the dissociation of water. Also ethylamine oxidation process can be achieved on the surface of the heterostructured nanosheets with abundant Ni(II) defects. More importantly, an electrolytic cell driven by solar cells was successfully constructed to realize ethylamine-acetonitrile reversible reforming. This work demonstrates the importance of heterostructure engineering in the rational synthesis of multifunctional catalysts towards electrochemical synthesis of fine chemicals.

Atomically dispersed Cu coordinated Rh metallene arrays for simultaneously electrochemical aniline synthesis and biomass upgrading

Organic electrocatalytic conversion is an essential pathway for the green conversion of low-cost organic compounds to high-value chemicals, which urgently demands the development of efficient electrocatalysts. Here, we report a Cu single-atom dispersed Rh metallene arrays on Cu foam for cathodic nitrobenzene electroreduction reaction and anodic methanol oxidation reaction. In the coupled electrocatalytic system, the Cusingle-atom-Rh metallene arrays on Cu foam requires only the low voltages of 1.18 V to reach current densities of 100 mA cm-2 for generating aniline and formate, with up to ~100% of nitrobenzene conversion/ aniline selectivity and over ~90% of formate Faraday efficiency, achieving synthesis of high-value chemicals. Density functional theory calculations reveal the electron effect between Cu single-atom and Rh host and catalytic reaction mechanism. The synergistic catalytic effect and H*-spillover effect can improve catalytic reaction process and reduce energy barrier for reaction process, thus enhancing electrocatalytic reaction activity and target product selectivity.

Synergistic treatment of carbon dioxide and nitrogen-containing wastewater by electrochemical C-N coupling

Electrocatalytic CO2 reduction technology has been considered a promising approach to alleviate the severe environmental and energy issues caused by the anthropogenic over-emission of CO2. Coupling CO2 reduction with nitrogen (N)-pollutants reduction from wastewater to produce higher valued products (e.g., urea, amide, amine, etc.) could significantly extend the application scenarios and product categories of CO2 reduction technologies. This paper investigates the available CO2 and N-pollutants sources and summarizes the recent progress of electrocatalytic C-N coupling reactions. Based on the fundamental research, technical concerns for scale-up applications of C-N coupling electrocatalysis are thoroughly discussed. Finally, we prospect the opportunities and challenges with an in-depth understanding of the underlying dominant factors in applying C-N coupling electrocatalysis. Further development in recycling CO2 and N pollutants via the electrocatalytic C-N coupling process is also discussed.

Environmental ammonia analysis based on exclusive nitrification by nitrifying biofilm screened from natural bioresource

Biofilm-based biological nitrification is widely used for ammonia removal, while hasn't been explored for ammonia analysis. The stumbling block is the coexist of nitrifying and heterotrophic microbes in real environment resulting in non-specific sensing. Herein, an exclusive ammonia sensing nitrifying biofilm was screened from natural bioresource, and a bioreaction-detection system for the on-line analysis of environmental ammonia based on biological nitrification was reported. The nitrifying microbes were aggregated into a nitrifying biofilm through a result-oriented bioresource enrichment strategy. The predominant nitrifying population and progressive surface reaction in the plug flow bioreactor led to the exclusive and exhaustive ammonia biodegradation for the establishment of a novel analytical method. The on-line ammonia monitoring prototype achieved complete biodegradation for determining ammonium nitrogen within 5 min and showed exceptional reliability in long-term real sample measurements without frequent calibration. This work offers a low-threshold natural screening paradigm for developing sustainable bioresource-based analytical technologies.

Formamide-based production of amines by metabolically engineering Corynebacterium glutamicum

Formamide is rarely used as nitrogen source by microorganisms. Therefore, formamide and formamidase have been used as protection system to allow for growth under non-sterile conditions and for non-sterile production of acetoin, a product lacking nitrogen. Here, we equipped Corynebacterium glutamicum, a renowned workhorse for industrial amino acid production for 60 years, with formamidase from Helicobacter pylori 26695, enabling growth with formamide as sole nitrogen source. Thereupon, the formamide/formamidase system was exploited for efficient formamide-based production of the nitrogenous compounds L-glutamate, L-lysine, N-methylphenylalanine, and dipicolinic acid by transfer of the formamide/formamidase system to established producer strains. Stable isotope labeling verified the incorporation of nitrogen from formamide into biomass and the representative product L-lysine. Moreover, we showed ammonium leakage during formamidase-based access of formamide to be exploitable to support growth of formamidase-deficient C. glutamicum in co-cultivation and demonstrated that efficient utilization of formamide as sole nitrogen source benefitted from overexpression of formate dehydrogenase. KEY POINTS: • C. glutamicum was engineered to access formamide. • Formamide-based production of nitrogenous compounds was established. • Nitrogen cross-feeding supported growth of a formamidase-negative strain.

Efficient electrosynthesis of formamide from carbon monoxide and nitrite on a Ru-dispersed Cu nanocluster catalyst

Conversion into high-value-added organic nitrogen compounds through electrochemical C-N coupling reactions under ambient conditions is regarded as a sustainable development strategy to achieve carbon neutrality and high-value utilization of harmful substances. Herein, we report an electrochemical process for selective synthesis of high-valued formamide from carbon monoxide and nitrite with a Ru₁Cu single-atom alloy under ambient conditions, which achieves a high formamide selectivity with Faradaic efficiency of 45.65 ± 0.76% at -0.5 V vs. RHE. In situ X-ray absorption spectroscopy, coupled with in situ Raman spectroscopy and density functional theory calculations results reveal that the adjacent Ru-Cu dual active sites can spontaneously couple *CO and *NH₂ intermediates to realize a critical C-N coupling reaction, enabling high-performance electrosynthesis of formamide. This work offers insight into the high-value formamide electrocatalysis through coupling CO and NO₂^- under ambient conditions, paving the way for the synthesis of more-sustainable and high-value chemical products.