Direct synthesis of cyanate anion from dinitrogen catalysed by molybdenum complexes bearing pincer-type ligand

Catalytic Nitrogen Fixation Using Well-Defined Molecular Catalysts under Ambient or Mild Reaction Conditions

Ammonia (NH3) is industrially produced from dinitrogen (N2) and dihydrogen (H2) by the Haber-Bosch process, although H2 is prepared from fossil fuels, and the reaction requires harsh conditions. On the other hand, microorganisms have fixed nitrogen under ambient reaction conditions. Recently, well-defined molecular transition metal complexes have been found to work as catalyst to convert N2 into NH3 by reactions with chemical reductants and proton sources under ambient reaction conditions. Among them, involvement of both N2-splitting pathway and proton-coupled electron transfer is found to be very effective for high catalytic activity. Furthermore, direct electrocatalytic and photocatalytic conversions of N2 into NH3 have been recently achieved. In addition to catalytic formation of NH3, selective catalytic conversion of N2 into hydrazine (NH2NH2) and catalytic silylation of N2 into silylamines have been reported. Catalytic C-N bond formation has been more recently established to afford cyanate anion (NCO-) under ambient reaction conditions. Further development of direct conversion of N2 into nitrogen-containing compounds as well as green ammonia synthesis leading to the use of ammonia as an energy carrier is expected.

Divalent Titanium via Reductive N-C Coupling of a TiIV Nitrido with π-Acids

The nitrido-ate complex [(PN)2Ti(N){μ2-K(OEt2)}]2 (1) (PN-=(N-(2-PiPr2-4-methylphenyl)-2,4,6-Me3C6H2) reductively couples CO and isocyanides in the presence of DME or cryptand (Kryptofix222), to form rare, five-coordinate TiII complexes having a linear cumulene motif, [K(L)][(PN)2Ti(NCE)] (E=O, L=Kryptofix222, (2); E=NAd, L=3 DME, (3); E=NtBu, L=3 DME, (4); E=NAd, L=Kryptofix222, (5)). Oxidation of 2-5 with [Fc][OTf] afforded an isostructural TiIII center containing a neutral cumulene, [(PN)2Ti(NCE)] (E=O, (6); E=NAd (7), NtBu (8)) and characterization by CW X-band EPR spectroscopy, revealed unpaired electron to be metal centric. Moreover, 1e- reduction of 6 and 7 in the presence of Kryptofix222cleanly reformed corresponding discrete TiII complexes 2 and 5, which were further characterized by solution magnetization measurements and high-frequency and -field EPR (HFEPR) spectroscopy. Furthermore, oxidation of 7 with [Fc*][B(C6F5)4] resulted in a ligand disproportionated TiIV complex having transoid carbodiimides, [(PN)2Ti(NCNAd)2] (9). Comparison of spectroscopic, structural, and computational data for the divalent, trivalent, and tetravalent systems, including their 15N enriched isotopomers demonstrate these cumulenes to decrease in order of backbonding as TiII→TiIII→TiIV and increasing order of π-donation as TiII→TiIII→TiIV, thus displaying more covalency in TiIII species. Lastly, we show a synthetic cycle whereby complex 1 can deliver an N-atom to CO and CNAd.

Hydroamination of alkenes with dinitrogen and titanium polyhydrides

An ideal synthesis of alkyl amines would involve the direct use of abundant and easily accessible molecules such as dinitrogen (N2) and feedstock alkenes1-4. However, this ambition remains a great challenge as it is usually difficult to simultaneously activate both N2 and a simple alkene and combine them together through carbon-nitrogen (C-N) bond formation. Currently, the synthesis of alkyl amines relies on the use of ammonia produced through the Haber-Bosch process and prefunctionalized electrophilic carbon sources. Here we report the hydroamination of simple alkenes with N2 in a trititanium hydride framework, which activates both alkenes and N2, leading to selective C-N bond formation and providing the corresponding alkyl amines on further hydrogenation and protonation. Computational studies reveal key mechanistic details of N2 activation and selective C-N bond formation. This work demonstrates a strategy for the transformation of N2 and simple hydrocarbons into nitrogen-containing organic compounds mediated by a multinuclear hydride framework.

Hydrazido complexes prepared by methylation of an anionic end-on bridging dinitrogen dititanium complex

Here we report stepwise methylation of end-on bridging dinitrogen to a hydrazido ligand to a pentamethylhydrazinium salt, which is mediated by a titanium system with a tripodal aryloxide supporting ligand. The results constitute a synthetic cycle for pentamethylhydrazinium formation from dinitrogen and methyl iodide. We also describe silylation of the dinitrogen complex and carboxylation of the hydrazido complex.

N2 Functionalization via Molybdenum-Nitride Complex: Stepwise BH Bond Additions

Reactivity of (triphosphine)MoIV-nitrido complex generated by N2 splitting, toward boranes is reported. The simple adduct Mo≡N→BH3 is observed with BH3.SMe2 while 1,2 addition is evidenced with 9-BBN leading to H-Mo=NBR2. A second addition of BH3.SMe2 is facile and forms an unprecedented complex featuring two bridging H between two B and the Mo centers. Addition of PMe3 or BH3.SMe2 promotes reductive elimination and N-H bond formation. The full sequence of functionalization at Mo≡N obtained after N2 splitting is therefore evidenced in this work.

Dinitrogen Cleavage and Multicoupling with Isocyanides in a Dititanium Dihydride Framework

Dinitrogen (N2) activation and functionalization through N-N bond cleavage and N-C bond formation are of great interest and importance but remain highly challenging. We report here for the first time N2 cleavage and selective multicoupling with isocyanides in a dititanium dihydride framework. The reaction of a dinitrogen dititanium dihydride complex [{(acriPNP)Ti}2(μ-η1:η2-N2)(μ-H)2] (1) with an excess (four or more equivalents) of p-methoxyphenyl isocyanide at room temperature gave a novel amidoamidinatoguanidinate complex [(acriPNP)Ti{NC(═NR)NC(═NR)CH2NR}Ti(acriPNP)(CNR)] (2, acriPNP = 4,5-bis(diisopropylphosphino)-2,7,9,9-tetramethyl-9H-acridin-10-ide; R = p-MeOC6H4) through N2 splitting and coupling with three isocyanide molecules. When 1 equiv of p-methoxyphenyl isocyanide was used to react with 1 at -30 °C, the hydrogenation of the isocyanide unit by the two hydride ligands in 1 took place, affording an amidomethylene-bridged dititanium dinitrogen complex [{(acriPNP)Ti}2(μ-η1:η2-N2){μ-η1:η2-CH2N(p-MeOC6H4)}] (3), which upon reaction with another equivalent of p-methoxyphenyl isocyanide at room temperature gave an amidomethylene/nitrido/carbodiimido complex [(acriPNP)Ti(N═C═NR)(μ-N)(μ-η1:η2-CH2NR)Ti(acriPNP)] (4) through N2 cleavage and N═C bond formation. Further reaction of 4 with 1 equiv of p-methoxyphenyl isocyanide led to an unprecedented four-component (carbodiimido, nitrido, isocyanide, and amidomethylene) coupling, yielding an amidoamidinatoguanidinate complex [{(acriPNP)Ti}2{NC(═NR)NC(═NR)CH2NR}] (5), which on reaction with another equivalent of p-methoxyphenyl isocyanide afforded the isocyanide-coordinated analogue 2. The reaction of 1 with 2-naphthyl isocyanide also took place in a similar multicoupling fashion. Moreover, the cross-coupling reactions of the p-methoxyphenyl isocyanide-derived amidomethylene/nitrido/carbodiimido complex 4 with 2-naphthyl isocyanide, cyclohexyl isocyanide, and tert-butyl isocyanide were also achieved, which afforded the corresponding amidoamidinatoguanidinate products consisting of two different isocyanides. Density functional theory (DFT) calculations further elucidated the mechanistic details.

Synthesis of Collidine from Dinitrogen via a Tungsten Nitride

The synthesis of pyridines from dinitrogen in homogeneous solution is known to be challenging considering that an N2 cleavage step needs to be combined with two N-C coupling steps. Herein, a tungsten complex bearing a tailor-made 2,2'-(tBu2As)2-substituted tolane ligand scaffold was shown to split N2 to afford the corresponding tungsten nitride, which is not the case for the corresponding (iPr2As)2-substituted derivative. The former nitride was then reacted with 2,4,6-trimethylpyrylium triflate, which led to the formation of a tungsten oxo complex, along with collidine. Over the course of this reaction, the O atom of the pyrylium starting material was replaced with an N atom via a hitherto unprecedented skeletal editing process.

Reactivity umpolung (reversal) of ligands in transition metal complexes

The success and power of homogeneous catalysis derives in large part from the wide choice of transition metal ions and their ligands. This tutorial review introduces examples where the reactivity of a ligand is completely reversed (umpolung) from Lewis basic/nucleophilic to acidic/electrophilic or vice versa on changing the metal and co-ligands. Understanding this phenomenon will assist in the rational design of catalysts and the understanding of metalloenzyme mechanisms. Labelling a metal and ligand with Seebach donor and acceptor labels helps to identify whether a reaction involving the intermolecular attack on the ligand is displaying native reactivity or reactivity umpolung. This has been done for complexes of nitriles, carbonyls, isonitriles, dinitrogen, Fischer carbenes, alkenes, alkynes, hydrides, methyls, methylidenes and alkylidenes, silylenes, oxides, imides/nitrenes, alkylidynes, methylidynes, and nitrides. The electronic influence of the metal and co-ligands is discussed in terms of the energy of (HOMO) d electrons. The energy can be related to the pKLACa (LAC is ligand acidity constant) of the theoretical hydride complexes [H-[M]-L]+ formed by the protonation of pair of valence d electrons on the metal in the [M-L] complex. Preliminary findings indicate that a negative pKLACa indicates that nucleophilic attack by a carbanion or amine on the ligand will likely occur while a positive pKLACa indicates that electrophilic attack by strong acids on the ligand will usually occur when the ligand is nitrile, carbonyl, isonitrile, alkene and η6-arene.

To Split or Not to Split: [AsCCAs]-Coordinated Mo, W, and Re Complexes and Their Reactivity toward Molecular Dinitrogen

Molybdenum, tungsten, and rhenium halides bearing a 2,2'-(iPr2As)2-substituted diphenylacetylene ([AsCCAs], 1-As) were prepared and reduced under an atmosphere of dinitrogen in order to activate the latter substrate. In the case of molybdenum, a diiodo (2-As) and a triiodo molybdenum precursor (5) were equally suited for reductive N2 splitting, which led to the isolation of [AsCCAs]Mo≡N(I) (3-As) in each case. For tungsten, [AsCCAs]WCl3 (6) was reduced under N2 to afford {[AsCCAs]WCl2}2(N2) (7), which is best described as a dinuclear π8δ4-configured μ-(η1: η1)-N2-bridged dimer. Attempts to reductively cleave the N2 unit in 7 did not lead to the expected tungsten nitride (8), which had to be prepared independently via the treatment of 7 with sodium azide. To arrive at a π10δ4-configured N2-bridged dimer in a tetragonally distorted ligand environment, [AsCCAs]ReCl3 (9) was reduced in the presence of N2. As expected, a μ-(η1: η1)-N2-bridged dirhenium species, namely, {[AsCCAs]ReCl2}2(N2) (10), was formed, but found to very quickly decompose (presumably via loss of N2), not only under reduced pressure, but also upon irradiation or heating. Hence, an alternative synthetic route to the originally envisioned nitride, [AsCCAs]Re≡N(Cl)2 (11), was developed. While all the aforementioned nitrides (3-As, 8, and 11) were found to be fairly robust, significantly different stabilities were noticed for {[AsCCAs]MCl2}2(N2) (7 for M = W, 10 for M = Re), which is ascribed to the electronically different MN2M cores (π8δ4 for 7 vs π10δ4 for 10) in these μ-(η1: η1)-N2-bridged dimers.

Stoichiometric reaction and catalytic effect of 2-dimethylaminoethanol in urethane formation

A computational study of the stoichiometric reaction and catalytic effect of 2-dimethylaminoethanol (DMEA) in urethane formation was performed. DMEA, besides its catalytic tertiary amine site, contains a hydroxyl group that can react with isocyanates and thus, it can affect the synthesis of polyurethane. In the catalytic system, the reaction between phenyl isocyanate and butan-1-ol, involving DMEA as a catalyst, was investigated. Meanwhile, for the competitive stoichiometric process, the reaction between phenyl isocyanate and DMEA was also considered. Both reactions were investigated by using the G3MP2BHandHLYP composite method and acetonitrile was chosen as the solvent. It was revealed that both pathways (catalytic and stoichiometric processes) are similar thermodynamically, but the catalytic reaction is preferred kinetically, which indicates the applicability of DMEA in urethane synthesis.

Nitrogen adsorption on Nb2C6H4+ cations: the important role of benzyne (ortho-C6H4)

N2 adsorption is a prerequisite for activation and transformation. Time-of-flight mass spectrometry experiments show that the Nb2C6H4+ cation, resulting from the gas-phase reaction of Nb2+ with C6H6, is more favorable for N2 adsorption than Nb+ and Nb2+ cations. Density functional theory calculations reveal the effect of the ortho-C6H4 ligand on N2 adsorption. In Nb2C6H4+, interactions between the Nb-4d and C-2p orbitals enable the Nb2+ cation to form coordination bonds with the ortho-C6H4 ligand. Although the ortho-C6H4 ligand in Nb2C6H4+ is not directly involved in the reaction, its presence increases the polarity of the cluster and brings the highest occupied molecular orbital (HOMO) closer to the lowest occupied molecular orbital (LUMO) of N2, thereby increasing the N2 adsorption energy, which effectively facilitates N2 adsorption and activation. This study provides fundamental insights into the mechanisms of N2 adsorption in "transition metal-organic ligand" systems.

Aza-Michael Addition of Dinitrogen to α,β-Unsaturated Carbonyl Compounds in a Dititanium Framework

The direct use of dinitrogen (N2) as a building block for the synthesis of NN-containing organic compounds is of fundamental interest and practical importance but has remained a formidable challenge to date. Here, we report an unprecedented 1,4-conjugate (aza-Michael) addition of N2 to α,β-unsaturated carbonyl compounds in a dititanium framework. The resulting hydrazinopropenolate products could be easily converted to diverse NN-containing organic compounds such as β-hydrazine-functionalized esters and amides, pyrazolidinones, and pyrazolines depending on the types of Michael acceptors through protonation with MeOH. Further transformations of a hydrazinopropenolate titanium complex through C-C and N-C bond formations with electrophiles such as CO2 and benzaldehyde have also been achieved. The mechanistic details of the N2 addition reaction have been elucidated by computational studies, revealing the importance of redox-active metal centers in this event. This work showcases the potential of using N2 as a building block for the synthesis of NN-containing organic compounds through activation and functionalization in a molecular metal framework.

Design, synthesis and reactivity of dimolybdenum complex bearing quaterphenylene-bridged pyridine-based PNP-type pincer ligand

Dimolybdenum complexes bearing 3,3'''-(1,1':3',1'':3'',1'''-quaterphenylene)-bridged pyridine-based PNP-type pincer ligand are designed and prepared according to DFT calculations on the cleavage step of dinitrogen-bridged dimolybdenum complexes bearing polyphenylene-bridged pyridine-based PNP-type pincer ligands. The dimolybdenum complexes are found to work as effective catalysts toward ammonia formation from dinitrogen with samarium diiodide as a reductant and water as a proton source under ambient reaction conditions.

An Experimental and Computational Investigation Rules Out Direct Nucleophilic Addition on the N2 Ligand in Manganese Dinitrogen Complex [Cp(CO)2 Mn(N2 )]

We have re-examined the reactivity of the manganese dinitrogen complex [Cp(CO)2 Mn(N2 )] (1, Cp=η5 -cyclopentadienyl, C5 H5 ) with phenylithium (PhLi). By combining experiment and density functional theory (DFT), we have found that, unlike previously reported, the direct nucleophilic attack of the carbanion onto coordinated dinitrogen does not occur. Instead, PhLi reacts with one of the CO ligands to provide an anionic acylcarbonyl dinitrogen metallate [Cp(CO)(N2 )MnCOPh]Li (3) that is stable only below -40 °C. Full characterization of 3 (including single crystal X-ray diffraction) was performed. This complex decomposes quickly above -20 °C with N2 loss to give a phenylate complex [Cp(CO)2 MnPh]Li (2). The latter compound was erroneously formulated as an anionic diazenido compound [Cp(CO)2 MnN(Ph)=N]Li in earlier reports, ruling out the claimed and so-far unique behavior of the N2 ligand in 1. DFT calculations were run to explore both the hypothesized and the experimentally verified reactivity of 1 with PhLi and are fully consistent with our results. Direct attack of a nucleophile on metal-coordinated N2 remains to be demonstrated.

Direct Incorporation of Dinitrogen into an Aliphatic C-H Bond

The activation of dinitrogen (N₂) and direct incorporation of its N atom into C-H bonds to create aliphatic C-N compounds remains unresolved. Incompatible conditions between dinitrogen reduction and C-H functionalization make this process extremely challenging. Herein, we report the first example of dinitrogen insertion into an aliphatic Csp³-H bond on the ligand scaffold of a 1,3-propane-bridged [N₂N]^2--type dititanium complex. Mechanistic investigations on the behaviors of dinuclear and mononuclear Ti complexes indicated the intramolecular synergistic effect of two Ti centers at a C-N bond-forming step. Computational studies revealed the critical isomerization between the inactive side-on N₂ complex and the active nitridyl complex, which is responsible for the Csp³-H amination. This strategy maps an efficient route toward the future synthesis of aliphatic amines directly from N₂.

Dinitrogen Activation and Addition to Unsaturated C-E (E=C, N, O, S) Bonds Mediated by Transition Metal Complexes

Dinitrogen (N₂ ) activation and functionalization is of fundamental interest and practical importance. This review focuses on N₂ activation and addition to unsaturated substrates, including carbon monoxide, carbon dioxide, heteroallenes, aldehydes, ketones, acid halides, nitriles, alkynes, and allenes, mediated by transition metal complexes, which afforded a variety of N-C bond formation products. Emphases are placed on the reaction modes and mechanisms. We hope that this work would stimulate further explorations in this challenging field.