Dopant triggered atomic configuration activates water splitting to hydrogen

Stability of Multivalent Ruthenium on CoWO4 Nanosheets for Improved Electrochemical Water Splitting with Alkaline Electrolyte

Engineering low-cost electrocatalysts with desired features is vital to decrease the energy consumption but challenging for superior water splitting. Herein, we development a facile strategy by the addition of multivalence ruthenium (Ru) into the CoWO4/CC system. During the synthesis process, the most of Ru3+ ions were insinuated into the lattice of CoWO4, while the residual Ru3+ ions were reduced to metallic Ru and further attached to the interface between carbon cloth and CoWO4 sheets. The optimal Ru2(M)-CoWO4/CC exhibited superior performance for the HER with an overpotential of 85 mV@10 mA cm-2, which was much better than most of reported electrocatalysts, regarding OER, a low overpotential of 240 mV@10 mA cm-2 was sufficient. In comparison to Ru2(0)-CoWO4/CC with the same Ru mass loading, multivalence Ru2(M)-CoWO4/CC required a lower overpotential for OER and HER, respectively. The Ru2(M)-CoWO4/CC couple showed excellent overall water splitting performance at a cell voltage of 1.48 V@10 mA cm-2 for used as both anodic and cathodic electrocatalysts. Results of the study showed that the electrocatalytic activity of Ru2(M)-CoWO4/CC was attributed to the in-situ transformation of Ru/Co sites, the multivalent Ru ions and the synergistic effect of different metal species stimulated the intrinsic activity of CoWO4/CC.

Material Engineering Strategies for Efficient Hydrogen Evolution Reaction Catalysts

Water electrolysis, a key enabler of hydrogen energy production, presents significant potential as a strategy for achieving net-zero emissions. However, the widespread deployment of water electrolysis is currently limited by the high-cost and scarce noble metal electrocatalysts in hydrogen evolution reaction (HER). Given this challenge, design and synthesis of cost-effective and high-performance alternative catalysts have become a research focus, which necessitates insightful understandings of HER fundamentals and material engineering strategies. Distinct from typical reviews that concentrate only on the summary of recent catalyst materials, this review article shifts focus to material engineering strategies for developing efficient HER catalysts. In-depth analysis of key material design approaches for HER catalysts, such as doping, vacancy defect creation, phase engineering, and metal-support engineering, are illustrated along with typical research cases. A special emphasis is placed on designing noble metal-free catalysts with a brief discussion on recent advancements in electrocatalytic water-splitting technology. The article also delves into important descriptors, reliable evaluation parameters and characterization techniques, aiming to link the fundamental mechanisms of HER with its catalytic performance. In conclusion, it explores future trends in HER catalysts by integrating theoretical, experimental and industrial perspectives, while acknowledging the challenges that remain.

Heterojunction-Induced Rapid Transformation of Ni3+/Ni2+ Sites which Mediates Urea Oxidation for Energy-Efficient Hydrogen Production

Water electrolysis is an environmentally-friendly strategy for hydrogen production but suffers from significant energy consumption. Substituting urea oxidation reaction (UOR) with lower theoretical voltage for water oxidation reaction adopting nickel-based electrocatalysts engenders reduced energy consumption for hydrogen production. The main obstacle remains strong interaction between accumulated Ni3+ and *COO in the conventional Ni3+-catalyzing pathway. Herein, a novel Ni3+/Ni2+ mediated pathway for UOR via constructing a heterojunction of nickel metaphosphate and nickel telluride (Ni2P4O12/NiTe), which efficiently lowers the energy barrier of UOR and avoids the accumulation of Ni3+ and excessive adsorption of *COO on the electrocatalysts, is developed. As a result, Ni2P4O12/NiTe demonstrates an exceptionally low potential of 1.313 V to achieve a current density of 10 mA cm-2 toward efficient urea oxidation reaction while simultaneously showcases an overpotential of merely 24 mV at 10 mA cm-2 for hydrogen evolution reaction. Constructing urea electrolysis electrolyzer using Ni2P4O12/NiTe at both sides attains 100 mA cm-2 at a low cell voltage of 1.475 V along with excellent stability over 500 h accompanied with nearly 100% Faradic efficiency.

Promotion of Acid-Water Oxidation by Lattice Distortion and Orbital Hybridization Induced by Ionic Dopant in Pyrochlore Y2Ru2O7

For acid-water oxidation, pyrochloric ruthenates are thought to be extremely effective electrocatalysts. In this work, through partial B-site replacement with larger M2+ cations, the electronic states of Y2Ru2O7 with strong electron correlations are reasonably managed, by which the inherent performance is tremendously promoted. Based on this, the improved Y2Ru1.9Sr0.1O7 electrocatalyst exhibits an outstanding durability and presents a highly inherent mass activity of 1915.1 A gRu-1 (at 1.53 V vs RHE). The enhanced oxygen-evolving reaction (OER) activity by ionic dopant in YRO pyrochlore can be attributed to two aspects, i.e., the lattice distortion induced inhibition of the grain coarsening, which results in a large surface area for YRO-M and increases the OER active sites, and the weakening of electron correlation via broadening of the Ru 4d bandwidths due to the increase of the average radius of B-site ions, which gives rise to an enhancement of conductivity and a strengthened hybridization between Ru 4d and O 2p orbitals and improves the reaction kinetics. The synergistic effects of lattice distortion and orbital hybridization promote the enhanced OER activity. The results would provide fresh concepts for the design of improved electrocatalysts and underscore the significance of managing the intrinsic performance through the dual modification of microstructure morphology and electronic structure.

Design Strategies towards Advanced Hydrogen Evolution Reaction Electrocatalysts at Large Current Densities

Hydrogen (H2), produced by water electrolysis with the electricity from renewable sources, is an ideal energy carrier for achieving a carbon-neutral and sustainable society. Hydrogen evolution reaction (HER) is the cathodic half-reaction of water electrolysis, which requires active and robust electrocatalysts to reduce the energy consumption for H2 generation. Despite numerous electrocatalysts have been reported by the academia for HER, most of them were only tested under relatively small current densities for a short period, which cannot meet the requirements for industrial water electrolysis. To bridge the gap between academia and industry, it is crucial to develop highly active HER electrocatalysts which can operate at large current densities for a long time. In this review, the mechanisms of HER in acidic and alkaline electrolytes are firstly introduced. Then, design strategies towards high-performance large-current-density HER electrocatalysts from five aspects including number of active sites, intrinsic activity of each site, charge transfer, mass transfer, and stability are discussed via featured examples. Finally, our own insights about the challenges and future opportunities in this emerging field are presented.

Structurally engineered highly efficient electrocatalytic performance of 3-dimensional Mo/Ni chalcogenides for boosting overall water splitting performance

Hydrogen production from water splitting combined with renewable electricity can provide a viable solution to the energy crisis. A novel MoS2/NiS2/Ni3S4 heterostructure is designed as a bifunctional electrocatalyst by facile hydrothermal method to demonstrate excellent electrocatalytic performance towards overall water splitting applications. MoS2/NiS2/Ni3S4 heterostructure necessitates a low overpotential of 81 mV and 210 mV to attain a current density of 10 mA cm-2 during the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Consequently, the MoS2/NiS2/Ni3S4 heterostructure-based electrolyzer shows a low cell voltage of 1.54 V at 10 mA cm-2. The present work highlights the significance of the heterostructure configuration of transition metal sulfide-based electrocatalysts for electrochemical overall water splitting applications.

Multi-d Electron Synergy in LaNi1-x Cox Ru Intermetallics Boosts Electrocatalytic Hydrogen Evolution

Despite the fact that d-band center theory links the d electron structure of transition metals to their catalytic activity, it is yet unknown how the synergistic effect of multi-d electrons impacts catalytic performance. Herein, novel LaNi1-x Cox Ru intermetallics containing 5d, 4d, and 3d electrons were prepared. In these compounds, the 5d orbital of La transfers electrons to the 4d orbital of Ru, which provides adsorption sites for H*. The 3d orbitals of Ni and Co interact with the 5d and 4d orbitals to generate an anisotropic electron distribution, which facilitates the adsorption and desorption of OH*. The synergistic effect of multi-d electrons ensures efficient catalytic activity. The optimized LaNi0.5 Co0.5 Ru has an overpotential of 43mV at 10 mA cm-2 for alkaline electrocatalytic hydrogen evolution reaction. Beyond offering a variety of new electrocatalysts, this work reveals the multi-d electron synergy in promoting catalytic reaction.