A molecular descriptor of intramolecular noncovalent interaction for regulating optoelectronic properties of organic semiconductors

Terminal Fluorination Modulates Crystallinity and Aggregation of Fully Non-Fused Ring Electron Acceptors for High-Performance and Durable Near-Infrared Organic Photodetectors

High dark current density (Jd) severely hinders further advancement of near-infrared organic photodetectors (NIR OPDs). Herein, we tackle this grand challenge by regulating molecular crystallinity and aggregation of fully non-fused ring electron acceptors (FNREAs). TBT-V-F, which features fluorinated terminals, notably demonstrates crystalline intensification and a higher prevalence predominance of J-aggregation compared to its chlorinated counterpart (TBT-V-Cl). The amalgamation of advantages confers TBT-V-F-based OPDs with lower nonradiative energy loss, improved charge transport, decreased energetic disorder, and reduced trap density. Consequently, the corresponding self-powered OPDs exhibit a 40-fold decrease in Jd, a remarkable increase in detectivity (D*sh), faster response time, and superior thermal stability compared to TBT-V-Cl-based OPDs. Further interfacial optimization results in an ultra-low Jd of 7.30×10-12 A cm-2 with D*sh over 1013 Jones in 320-920 nm wavelength and a climax of 2.2×1014 Jones at 800 nm for the TBT-V-F-based OPDs, representing one of the best results reported to date. This work paves a compelling material-based strategy to suppress Jd for highly sensitive NIR OPDs, while also illustrates the viability of FNREAs in construction of stable and affordable NIR OPDs for real-world applications.

Exploration of red and deep red Thermally activated delayed fluorescence molecules constructed via intramolecular locking strategy

Red and deep red (DR) organic light-emitting diodes (OLEDs) have garnered increasing attention due to their widespread applications in display technology and lighting devices. However, most red OLEDs exhibit low luminescence efficiency, severely limiting their practical applications. To address this challenge, we theoretically design four novel TADF molecules with red and DR luminescence using intramolecular locking strategies building upon the experimental findings of DCN-DLB and DCN-DSP, and their crystal structures are predicted with the lower energy and higher packing density. The photophysical properties and luminescence mechanism of six molecules in toluene and crystal are clarified using the first principles calculation and thermal vibration correlation function (TVCF) method. The proposed design strategy is anticipated to offer several advantages: enhanced electron-donating capabilities, more rigid structures, longer emission wavelengths and higher luminescence efficiency. Specifically, we introduce oxygen atoms and nitrogen atoms as intramolecular locks, and the newly developed DCN-DBF and DCN-PHC have redshifted emission, narrow singlet-triplet energy gap (ΔEST), fast reverse intersystem crossing rate and enhanced photoluminescence quantum yield (PLQY). Notably, DCN-DBF achieves both long wavelength emission and high efficiency, with emission peaks at 598 nm and 587 nm corresponding to PLQY of 52.13 % and 43.42 % in toluene and crystal, respectively. Our work not only elucidates the relationship between molecular structures and photophysical properties, but also proposes feasible intramolecular locking design strategies and four promising red and DR TADF molecules, which could provide a valuable reference for the design of more efficient red and DR TADF emitters.

Ag(i) emitters with ultrafast spin-flip dynamics for high-efficiency electroluminescence

Carbene-metal-amide (CMA) complexes are appealing emitters for organic light-emitting diodes (OLEDs). However, little is known about silver(i)-CMA complexes, particularly electroluminescent ones. Here we report a series of Ag(i)-CMA complexes prepared using benzothiophene-fused carbazole derivatives as amide ligands. These complexes emit via thermally activated delayed fluorescence (TADF), together with high photoluminescence quantum yields of up to 72% in thin films. By strengthening the π-donating ability of the amide ligands, ultrashort emission lifetimes of down to 144 ns in thin films and 11 ns in solution (with a radiative rate constant of ∼107 s-1) are realized, among the shortest lifetimes for TADF emitters. Key to this unique feature is the ultrafast spin-flip dynamics consisting of forward and reverse intersystem crossing rates of up to ∼109 s-1 and ∼108 s-1, respectively, verified by the transient absorption spectroscopic study. The resulting solution-processed OLEDs based on the optimal complex afford record external quantum efficiencies of 16.2% at maximum and 13.4% at 1000 nits, representing the state-of-the-art performance for Ag(i) emitters. This work presents an effective approach for the development of short-lived TADF materials for high-efficiency OLEDs.

Regulating Optoelectronic and Thermoelectric Properties of Organic Semiconductors by Heavy Atom Effects

Heavy atom effects can be used to enhance intermolecular interaction, regulate quinoidal resonance properties, increase bandwidths, and tune diradical characters, which have significant impacts on organic optoelectronic devices, such as organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs), organic photovoltaics (OPVs), etc. Meanwhile, the introduction of heavy atoms is shown to promote charge transfer, enhance air stability, and improve device performances in the field of organic thermoelectrics (OTEs). Thus, heavy atom effects are receiving more and more attention. However, regulating heavy atoms in organic semiconductors is still meeting great challenges. For example, heavy atoms will lead to solubility and stability issues (tellurium substitution) and lack of versatile design strategy and effective synthetic methods to be incorporated into organic semiconductors, which limit their application in electronic devices. Therefore, this work timely summarizes the unique functionalities of heavy atom effects, and up-to-date progress in organic electronics including OFETs, OPVs, OLEDs, and OTEs, while the structure-performance relationships between molecular designs and electronic devices are clearly elucidated. Furthermore, this review systematically analyzes the remaining challenges in regulating heavy atoms within organic semiconductors, and design strategies toward efficient and stable organic semiconductors by the introduction of novel heavy atoms regulation are proposed.

Suppressing Exciton-Vibration Coupling via Intramolecular Noncovalent Interactions for Low-Energy-Loss Organic Solar Cells

Minimizing energy loss is crucial for breaking through the efficiency bottleneck of organic solar cells (OSCs). The main mechanism of energy loss can be attributed to non-radiative recombination energy loss (ΔEnr) that occurs due to exciton-vibration coupling. To tackle this challenge, tuning intramolecular noncovalent interactions is strategically utilized to tailor novel fused ring electron acceptors (FREAs). Upon comprehensive analysis of both theoretical and experimental results, this approach can effectively enhance molecular rigidity, suppress structural relaxation, reduce exciton reorganization energy, and weakens exciton-vibration coupling strength. Consequently, the binary OSC device based on Y-SeSe, which features dual strong intramolecular Se ⋅ ⋅ ⋅ O noncovalent interactions, achieves an outstanding power conversion efficiency (PCE) of 19.49 %, accompanied by an extremely small ΔEnr of 0.184 eV, much lower than those of Y-SS and Y-SSe based devices with weaker intramolecular noncovalent interactions. These achievements not only set an efficiency record for selenium-containing OSCs, but also mark the lowest reported ΔEnr value among high-performance binary devices. Furthermore, the ternary blend device showcases a remarkable PCE of 20.51 %, one of the highest PCEs for single-junction OSCs. This work demonstrates the effectiveness of intramolecular noncovalent interactions in suppressing exciton-vibration coupling, thereby achieving low-energy-loss and high-efficiency OSCs.

Spin-Lifetime Probe for Detecting Intramolecular Noncovalent Interaction in Organic Semiconductors

Intramolecular noncovalent interaction (INCI), a crucial strategy for effectively enhancing molecular planarity and extending π-electron delocalization in organic semiconductors (OSCs), has played an increasingly important role in optoelectronic applications. However, though the INCI formation is regularly considered to improve the device performance by literature, there is no feasible approach to directly and reliably characterizing its formation in practical-OSC films thus far. Here in this study, by theoretical analysis and calculation, the generation of INCIs in OSCs is found, normally consisting of relatively heavy elements, such as O···Se, O···S, N···S interactions, etc., can induce enhanced strength of spin-orbit coupling, the primary factor dominating spin lifetime in OSCs. Based on this newly discovered theory, spin lifetime is creatively employed as a probe for sensitively detecting INCIs in OSC films via spin valves or field-induced electron paramagnetic resonance, respectively. This study will highly promote academic and applicable developments of the cross-cutting frontier research field between organic spintronics and electronics.

Hydrostatic pressure effect on excited state properties of room temperature phosphorescence molecules: A QM/MM study

Stimulus-responsive organic room temperature phosphorescence (RTP) materials exhibit variations in their luminescent characteristics (lifetime and efficiency) upon exposure to external stimuli, including force, heat, light and acid-base conditions, the development of stimulus-responsive RTP molecules becomes imperative. However, the inner responsive mechanism is unclear, theoretical investigations to reveal the relationship among hydrostatic pressures, molecular structures and photophysical properties are highly desired. Herein, taking the Se-containing RTP molecule (SeAN) as a model, based on the dispersion corrected density functional theory (DFT-D), the combined quantum mechanics and molecular dynamics (QM/MM) method and thermal vibration correlation function (TVCF) theory, the influences of hydrostatic pressure on molecular structures, transition properties as well as lifetimes and efficiencies of RTP molecule are theoretically studied. Results show that extended lifetime and enhanced efficiency are observed at 2 Gpa compared with molecule at normal pressure, and this is related with the small reorganization energy and large oscillator strength. Moreover, due to the small energy gap (0.34 eV) and remarkable spin-orbit coupling (SOC) constant (8.56 cm-1) between first singlet excited state and triplet state, fast intersystem crossing (ISC) process is determined for molecule at 6 Gpa. Furthermore, the intermolecular interactions are visualized using independent gradient model based on Hirshfeld partition (IGMH) and the changes of molecular packing modes, SOC values, lifetimes and efficiencies with pressures are detected. These results reveal the relationship between molecular structures and RTP properties. Our work provides theoretical insights into the hydrostatic pressure response mechanism and could promote the development new efficient stimulus-responsive molecules.

A DFT Study of Band-Gap Tuning in 2D Black Phosphorus via Li+, Na+, Mg2+, and Ca2+ Ions

Black phosphorus (BP) and its two-dimensional derivative (2D-BP) have garnered significant attention as promising anode materials for electrochemical energy storage devices, including next-generation fast-charging batteries. However, the interactions between BP and light metal ions, as well as how these interactions influence BP's electronic properties, remain poorly understood. Here, we employed density functional theory (DFT) to investigate the effects of monovalent (Li+ and Na+) and divalent (Mg2+ and Ca2+) ions on the valence electronic structure of 2D-BP. Molecular orbital analysis revealed that the adsorption of divalent cations can significantly reduce the band gap, suggesting an enhancement in charge transfer rates. In contrast, the adsorption of monovalent cations had minimal impact on the band gap, suggesting the preservation of 2D-BP's intrinsic electrical properties. Energetic and charge analyses indicated that the extent of charge transfer primarily governs the ability of ions to modulate 2D-BP's electronic structure, especially under high-pressure conditions where ions are in close proximity to the 2D-BP surface. Moreover, charge polarization calculations revealed that, compared with monovalent cations, divalent cations induced greater polarization, disrupting the symmetry of the pristine 2D-BP and further influencing its electronic characteristics. These findings provide a molecular-level understanding of how ion interactions influence 2D-BP's electronic properties during ion-intercalation processes, where ions are in close proximity to the 2D-BP surface. Moreover, the calculated diffusion barrier results revealed the potential of 2D-BP as an effective anode material for lithium-ion, sodium-ion, and magnesium-ion batteries, though its performance may be limited for calcium-ion batteries. By extending our understanding of interactions between ions and 2D-BP, this work contributes to the design of efficient and reliable energy storage technologies, particularly for the next-generation fast-charging batteries.

Synergistic Intramolecular Non-Covalent Interactions Enable Robust Pure-Blue TADF Emitters

Stability-issues of organic light-emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) require further advancements, especially in pure-blue range of CIEy < 0.20, existing a dilemma between color purity and device lifetime. Though improving bond-dissociation-energy (BDE) can effectively improve material intrinsic stability, strategies to simultaneously improve BDE and photophysical performances are still lacking. Herein, it is disclosed that synergistic intramolecular non-covalent interactions (Intra-NI) can achieve not only the highest C─N BDE among blue TADF materials, but enhanced molecular-rigidity, near-unity photoluminescent quantum yields and short delayed lifetime. Pure-blue TADF-OLEDs based on proof-of-concept TADF material realize high external-quantum-efficiency and record-high LT80@500 cd m-2 of 109 h with CIEy = 0.16. Furthermore, deep-blue TADF-sensitized devices exhibit high LT80@500 cd m-2 of 81 h with CIEy = 0.10. The findings provide new insight into the critical role of Intra-NI in OLED materials and open the way to tackling vexing stability issues for developing robust pure-blue organic emitters and other functional materials.

Open-shell Poly(3,4-dioxythiophene) Radical for Highly Efficient Photothermal Conversion

Open-shell organic radical semiconductor materials have received increasing attention in recent years due to their distinctive properties compared to the traditional materials with closed-shell singlet ground state. However, their poor chemical and photothermal stability in ambient conditions remains a significant challenge, primarily owing to their high reactivity with oxygen. Herein, a novel open-shell poly(3,4-dioxythiophene) radical PTTO2 is designed and readily synthesized for the first time using low-cost raw material via a straightforward BBr3-demethylation of the copolymer PTTOMe2 precursor. The open-shell character of PTTO2 is carefully studied and confirmed via the signal-silent 1H nuclear magnetic resonance spectrum, highly enhanced electron spin resonance signal compared with PTTOMe2, as well as the ultra-wide ultraviolet-visible-near nfraredUV-vis-NIR absorption and other technologies. Interestingly, the powder of PTTO2 exhibits an extraordinary absorption range spanning from 300 to 2500 nm and can reach 274 °C under the irradiation of 1.2 W cm-2, substantially higher than the 108 °C achieved by PTTOMe2. The low-cost PTTO2 stands as one of the best photothermal conversion materials among the pure organic photothermal materials and provides a new scaffold for the design of stable non-doped open-shell polymers.

A Facile One-Step Self-Assembly Strategy for Novel Carbon Dots Supramolecular Crystals with Ultralong Phosphorescence Controlled by NH4. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024;20:e2402236. [PMID: 38970543 DOI: 10.1002/smll.202402236] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

A new methodological design is proposed for carbon dots (CDs)-based crystallization-induced phosphorescence (CIP) materials via one-step self-assembled packaging controlled by NH4 +. O-phenylenediamine (o-PD) as a nitrogen/carbon source and the ammonium salts as oxidants are used to obtain CDs supramolecular crystals with a well-defined staircase-like morphology, pink fluorescence and ultralong green room-temperature phosphorescence (RTP) (733.56 ms) that is the first highest value for CDs-based CIP materials using pure nitrogen/carbon source by one-step packaging. Wherein, NH4 + and o-PD-derived oxidative polymers are prerequisites for self-assembled crystallization so as to receive the ultralong RTP. Density functional theory calculation indicates that NH4 + tends to anchor to the dimer on the surface state of CDs and guides CDs to cross-arrange in an X-type stacking mode, leading to the spatially separated frontier orbitals and the through-space charge transfer (TSCT) excited state in turn. Such a self-assembled mode contributes to both the small singlet-triplet energy gap (ΔEST) and the fast inter-system crossing (ISC) process that is directly related to ultralong RTP. This work not only proposes a new strategy to prepare CDs-based CIP materials in one step but also reveals the potential for the self-assembled behavior controlled by NH4 +.

Theoretical insights on highly efficient X-shaped near-infrared thermal activation delayed fluorescence emitter

The near-infrared (NIR) thermally activated delayed fluorescence (TADF) molecules hold practical application value in various fields, including biological imaging, anti-counterfeiting, sensors, telemedicine, photomicrography, and night vision display. These molecules have emerged as a significant development direction in organic electroluminescent devices, offering exciting possibilities for future technological advancements. Despite the remarkable potential of NIR-TADF molecules in various applications, the development of molecules that exhibit both long-wavelength emission and high efficiency remains a significant challenge. Herein, based on T-type and Y-type TADF molecules BCN-TPA and ECN-TPA, a novel X-type TADF molecule X-ECN-TPA is theoretically designed through a molecular fusion strategy. Utilizing first-principles calculations and the thermal vibration correlation function (TVCF) method, the photophysical properties and luminescent mechanisms of these three molecules in both solvent and solid (doped films) are revealed. A comparison of the luminescent properties of isomeric BCN-TPA and ECN-TPA shows that the enhanced luminescence efficiency of BCN-TPA in the solid states is attributed to higher radiative rates and lower non-radiative rates. Furthermore, compared to BCN-TPA and ECN-TPA, X-ECN-TPA exhibits significant conjugation extension, resulting in a pronounced redshift, reaching 831 nm and 813 nm in solvent and solid states, respectively. Importantly, molecular fusion significantly increases the transition dipole moment density between the donor and acceptor, leading to a substantial increase in radiative transition rates. Additionally, molecular fusion effectively reduces the energy gap between the first singlet excited state (S1) and the first triplet excited state (T1), facilitating the improvement of the reverse intersystem crossing (RISC) process. In addition, the calculation of Marcus formula shows that the triplet energy transfer from CBP to BCN-TPA, ECN-TPA and X-ECN-TPA is very effective. This work not only designs a novel efficient NIR-TADF molecule but also proposes a strategy for designing efficient NIR-TADF molecules. This principle offers unique insights for optimizing traditional molecular frameworks, opening up new possibilities for future advancements.

The exciton dynamics and charge transfer in polymers with the effects of chlorine substituents

Donor-acceptor (D-A) type conjugated polymers, particularly those with electron-withdrawing halogen substituents, have demonstrated high efficiency as donor materials in solar energy conversion. In our previous work, we have successfully synthesized three low-cost D-A type conjugated polymers (designated as PJ-1, PJ-2, and PJ-3) through a gradual chlorination process, of which, devices based on PJ-1 exhibited exceptional power conversion efficiency (15.01%) and figure-of-merit values (45.48). In this study, we further investigated the excited-state dynamics of the three donor polymers by transient absorption spectroscopy to explore the dynamic reasons behind the high power conversion efficiency of PJ-1. Our findings revealed that PJ-1 exhibited pronounced aggregation, which facilitated intermolecular interactions, thereby enhancing charge transport capability and suppressing trap-assisted recombination. Furthermore, the PJ-1-based heterojunction presented efficient exciton dissociation and enhanced hole transfer efficiency. These results underscore the potential of chlorine substitution in improving exciton dissociation and charge transfer via regulating aggregation behavior and energy level, offering a straightforward and effective approach to engineer high-performance conjugated polymer donor materials for photovoltaic applications.

Transition State Stabilizing Effects of Oxygen and Sulfur Chalcogen Bond Interactions

Non-covalent chalcogen bond (ChB) interactions have found utility in many fields, including catalysis, organic semiconductors, and crystal engineering. In this study, the transition stabilizing effects of ChB interactions of oxygen and sulfur were experimentally measured using a series of molecular rotors. The rotors were designed to form ChB interactions in their bond rotation transition states. This enabled the kinetic influences to be assessed by monitoring changes in the rotational barriers. Despite forming weaker ChB interactions, the smaller chalcogens were able to stabilize transition states and had measurable kinetic effects on the rotational barriers. Sulfur stabilized the bond rotation transition state by as much as -7.2 kcal/mol without electron-withdrawing groups. The key was to design a system where the sulfur σ ${\sigma }$ -hole was aligned with the lone pairs of the chalcogen bond acceptor. Oxygen rotors also could form transition state stabilizing ChB interactions but required electron-withdrawing groups. For both oxygen and sulfur ChB interactions, a strong correlation was observed between transition state stabilizing abilities and electrostatic potential (ESP) of the chalcogen, providing a useful predictive parameter for the rational design of future ChB systems.

Non-covalent planarizing interactions yield highly ordered and thermotropic liquid crystalline conjugated polymers

Controlling the multi-level assembly and morphological properties of conjugated polymers through structural manipulation has contributed significantly to the advancement of organic electronics. In this work, a redox active conjugated polymer, TPT-TT, composed of alternating 1,4-(2-thienyl)-2,5-dialkoxyphenylene (TPT) and thienothiophene (TT) units is reported with non-covalent intramolecular S⋯O and S⋯H-C interactions that induce controlled main-chain planarity and solid-state order. As confirmed by density functional theory (DFT) calculations, these intramolecular interactions influence the main chain conformation, promoting backbone planarization, while still allowing dihedral rotations at higher kinetic energies (higher temperature), and give rise to temperature-dependent aggregation properties. Thermotropic liquid crystalline (LC) behavior is confirmed by cross-polarized optical microscopy (CPOM) and closely correlated with multiple thermal transitions observed by differential scanning calorimetry (DSC). This LC behavior allows us to develop and utilize a thermal annealing treatment that results in thin films with notable long-range order, as shown by grazing-incidence X-ray diffraction (GIXD). Specifically, we identified a first LC phase, ranging from 218 °C to 107 °C, as a nematic phase featuring preferential face-on π-π stacking and edge-on lamellar stacking exhibiting a large extent of disorder and broad orientation distribution. A second LC phase is observed from 107 °C to 48 °C, as a smectic A phase featuring sharp, highly ordered out-of-plane lamellar stacking features and sharp tilted backbone stacking peaks, while the structure of a third LC phase with a transition at 48 °C remains unclear, but resembles that of the solid state at ambient temperature. Furthermore, the significance of thermal annealing is evident in the ∼3-fold enhancement of the electrical conductivity of ferric tosylate-doped annealed films reaching 55 S cm-1. More importantly, thermally annealed TPT-TT films exhibit both a narrow distribution of charge-carrier mobilities (1.4 ± 0.1) × 10-2 cm2 V-1 s-1 along with a remarkable device yield of 100% in an organic field-effect transistor (OFET) configuration. This molecular design approach to obtain highly ordered conjugated polymers in the solid state affords a deeper understanding of how intramolecular interactions and repeat-unit symmetry impact liquid crystallinity, solution aggregation, solution to solid-state transformation, solid-state morphology, and ultimately device applications.

Sensitive Organic Photodetectors With Spectral Response up to 1.3 µm Using a Quinoidal Molecular Semiconductor

Detecting short-wavelength infrared (SWIR) light has underpinned several emerging technologies. However, the development of highly sensitive organic photodetectors (OPDs) operating in the SWIR region is hindered by their poor external quantum efficiencies (EQEs) and high dark currents. Herein, the development of high-sensitivity SWIR-OPDs with an efficient photoelectric response extending up to 1.3 µm is reported. These OPDs utilize a new ultralow-bandgap molecular semiconductor featuring a quinoidal tricyclic electron-deficient central unit and multiple non-covalent conformation locks. The SWIR-OPD achieves an unprecedented EQE of 26% under zero bias and an even more impressive EQE of up to 41% under a -4 V bias at 1.10 µm, effectively pushing the detection limit of silicon photodetectors. Additionally, the low energetic disorder and trap density in the active layer lead to significant suppression of thermal-generation carriers and dark current, resulting in excellent detectivity (Dsh *) exceeding 1013 Jones from 0.50 to 1.21 µm and surpassing 1012 Jones even at 1.30 µm under zero bias, marking the highest achievements for OPDs beyond the silicon limit to date. Validation with photoplethysmography measurements, a spectrometer prototype in the 0.35-1.25 µm range, and image capture under 1.20 µm irradiation demonstrate the extensive applications of this SWIR-OPD.

Low-Cost Nonfused-Ring Electron Acceptors Enabled by Noncovalent Conformational Locks

ConspectusSince the first bilayer-structured organic solar cells (OSCs) in 1986, fullerenes and their derivatives have dominated the landscape for two decades due to their unique properties. In recent years, the breakthrough in nonfullerene acceptors (NFAs) was mainly attributed to the development of fused-ring electron acceptors (FREAs), whose photovoltaic performance surpassed that of fullerene derivatives. Through the unremitting efforts of the whole community, the power conversion efficiencies (PCEs) have surpassed 19% in FREA-based OSCs. However, FREAs generally suffered from complex synthetic approaches and high product costs, which hindered large-scale production. Therefore, many researchers are seeking a new type of NFA to achieve cost-effective, highly efficient OSCs.In collaboration with Marks and Facchetti in 2012, Huang et al. (Huang, H. J. Am. Chem. Soc. 2012, 134, 10966-10973, 10.1021/ja303401s) proposed the concept of "noncovalent conformational locks" (NoCLs). In the following years, our group has been focusing on the theoretical and experimental exploration of NoCLs, revealing their fundamental nature, formulating a simple descriptor for quantifying their strength, and employing this approach to achieve high-performance organic/polymeric semiconductors for optoelectronics, such as OSCs, thin-film transistors, room-temperature phosphorescence, and photodetectors. The NoCLs strategy has been proven to be a simple and effective approach for enhancing molecular rigidity and planarity, thus improving the charge transport mobilities of organic/polymeric semiconductors, attributed to reduced reorganization energy and suppressed nonradiative decay.In 2018, Chen et al. (Li, S. Adv. Mater. 2018, 30, 1705208, 10.1002/adma.201705208) reported the first example of nonfused-ring electron acceptors (NFREAs) with intramolecular noncovalent F···H interactions. The NoCLs strategy is essential in NFREAs, as it simplifies the conjugated structures while maintaining high coplanarity comparable to that of FREAs. Due to their simple structures and concise synthesis routes, NFREAs show great potential for achieving cost-effective and highly efficient OSCs. In this Account, we provide an overview of our efforts in developing NFREAs with the NoCLs strategy. We begin with a discussion on the distinct features of NFREAs compared with FREAs, and the structural simplification from FREAs to NFREAs to completely NFREAs. Next, we examine several selected typical examples of NFREAs with remarkable photovoltaic performance, aiming to provide an in-depth exploration of the molecular design principle and structure-property-performance relationships. Then, we discuss how to achieve a balance among efficiency, stability, and cost through a two-in-one strategy of polymerized NFREAs (PNFREAs). Finally, we offer our views on the current challenges and future prospects of NFREAs. We hope this Account will trigger intensive research interest in this field, thus propelling OSCs into a new stage.

Precisely Manipulating Molecular Packing via Tuning Alkyl Side-Chain Topology Enabling High-Performance Nonfused-Ring Electron Acceptors

In the development of high-performance organic solar cells (OSCs), the self-organization of organic semiconductors plays a crucial role. This study focuses on the precisely manipulation of molecular assemble via tuning alkyl side-chain topology in a series of low-cost nonfused-ring electron acceptors (NFREAs). Among the three NFREAs investigated, DPA-4, which possesses an asymmetric alkyl side-chain length, exhibits a tight packing in the crystal and high crystallinity in the film, contributing to improved electron mobility and favorable film morphology for DPA-4. As a result, the OSC device based on DPA-4 achieves an excellent power conversion efficiency of 16.67 %, ranking among the highest efficiencies for NFREA-based OSCs.

Versatile Neuromorphic Modulation and Biosensing based on N-type Small-molecule Organic Mixed Ionic-Electronic Conductors

The ion/chemical-based modulation feature of organic mixed ionic-electronic conductors (OMIECs) are critical to advancing next generation bio-integrated neuromorphic hardware. Despite achievements with polymeric OMIECs in organic electrochemical neuronal synapse (OENS). However, small molecule OMIECs based OENS has not yet been realized. Here, for the first time, we demonstrate an effective materials design concept of combining n-type fused all-acceptor small molecule OMIECs with subtle side chain optimization that enables robustly and flexibly modulating versatile synaptic behavior and sensing neurotransmitter in solid or aqueous electrolyte, operating in accumulation modes. By judicious tuning the ending side chains, the linear oligoether and butyl chain derivative gNR-Bu exhibits higher recognition accuracy for a model artificial neural network (ANN) simulation, higher steady conductance states and more outstanding ambient stability, which is superior to the state-of-art n-type OMIECs based OENS. These superior artificial synapse characteristics of gNR-Bu can be attributed to its higher crystallinity with stronger ion bonding capacities. More impressively, we unprecedentedly realized n-type small-molecule OMIECs based OENS as a neuromorphic biosensor enabling to respond synaptic communication signals of dopamine even at sub-μM level in aqueous electrolyte. This work may open a new path of small-molecule ion-electron conductors for next-generation ANN and bioelectronics.