Isoreticular two-dimensional magnetic coordination polymers prepared through pre-synthetic ligand functionalization

Controlling Noncollinear Ferromagnetism in van der Waals Metal-Organic Magnets

Van der Waals (vdW) magnets both allow exploration of fundamental 2D physics and offer a route toward exploiting magnetism in next generation information technology, but vdW magnets with complex, noncollinear spin textures are currently rare. We report here the syntheses, crystal structures, magnetic properties and magnetic ground states of four bulk vdW metal-organic magnets (MOMs): FeCl2(pym), FeCl2(btd), NiCl2(pym), and NiCl2(btd), pym = pyrimidine and btd = 2,1,3-benzothiadiazole. Using a combination of neutron diffraction and bulk magnetometry we show that these materials are noncollinear magnets. Although only NiCl2(btd) has a ferromagnetic ground state, we demonstrate that low-field hysteretic metamagnetic transitions produce states with net magnetization in zero-field and high coercivities for FeCl2(pym) and NiCl2(pym). By combining our bulk magnetic data with diffuse scattering analysis and broken-symmetry density-functional calculations, we probe the magnetic superexchange interactions, which when combined with symmetry analysis allow us to suggest design principles for future noncollinear vdW MOMs. These materials, if delaminated, would prove an interesting new family of 2D magnets.

Magnetic structure and properties of the honeycomb antiferromagnet [Na(OH2)3]Mn(NCS)3

We report the magnetic structure and properties of a thiocyanate-based honeycomb magnet [Na(OH2)3]Mn(NCS)3 which crystallises in the unusual low-symmetry trigonal space group P3̄. Magnetic measurements on powder samples show this material is an antiferromagnet (ordering temperature TN,mag = 18.1(6) K) and can be described by nearest neighbour antiferromagnetic interactions J = -11.07(4) K. A method for growing neutron-diffraction sized single crystals (>10 mm3) is demonstrated. Low temperature neutron single crystal diffraction shows that the compound adopts the collinear antiferromagnetic structure with TN,neut = 18.94(7) K, magnetic space group P3̄'. Low temperature second-harmonic generation (SHG) measurements provide no evidence of breaking of the centre of symmetry.

Self-condensation-assisted chemical vapour deposition growth of atomically two-dimensional MOF single-crystals

Two-dimensional metal-organic frameworks (MOFs) have a wide variety of applications in molecular separation and other emerging technologies, including atomically thin electronics. However, due to the inherent fragility and strong interlayer interactions, high-quality MOF crystals of atomic thickness, especially isolated MOF crystal monolayers, have not been easy to prepare. Here, we report the self-condensation-assisted chemical vapour deposition growth of atomically thin MOF single-crystals, yielding monolayer single-crystals of poly[Fe(benzimidazole)2] up to 62 μm in grain sizes. By using transmission electron microscopy and high-resolution atomic force microscopy, high crystallinity and atomic-scale single-crystal structure are verified in the atomically MOF flakes. Moreover, integrating such MOFs with MoS2 to construct ultrathin van der Waals heterostructures is achieved by direct growth of atomically MOF single-crystals onto monolayer MoS2, and enables a highly selective ammonia sensing. These demonstrations signify the great potential of the method in facilitating the development of the fabrication and application of atomically thin MOF crystals.

Recent Progress in 2D Metal-Organic Framework-Related Materials

2D metal-organic frameworks-based (2D MOF-related) materials benefit from variable topological structures, plentiful open active sites, and high specific surface areas, demonstrating promising applications in gas storage, adsorption and separation, energy conversion, and other domains. In recent years, researchers have innovatively designed multiple strategies to avoid the adverse effects of conventional methods on the synthesis of high-quality 2D MOFs. This review focuses on the latest advances in creative synthesis techniques for 2D MOF-related materials from both the top-down and bottom-up perspectives. Subsequently, the strategies are categorized and summarized for synthesizing 2D MOF-related composites and their derivatives. Finally, the current challenges are highlighted faced by 2D MOF-related materials and some targeted recommendations are put forward to inspire researchers to investigate more effective synthesis methods.

Mechanical Exfoliation of Multilayer Pseudohalogen-Bridged Nanosheets

The development of nanolayered materials is one of the greatest challenges in nanoscience. Until now, pseudohalogen-bridged nanosheets using the mechanical exfoliation method have not been reported. A state-of-the-art material, {[FeII(3-acetylpyridine)2][HgII(μ-SCN)4]}n (1), has been developed to achieve the goal. The compound forms a two-dimensional (2D) coordination polymer with weak out-of-plane van der Waals interactions and has an intrinsic tendency to form shear planes perpendicular to the crystallographic c-direction. These structural features predispose 1 to mechanical exfoliation realized by employing the "Scotch-tape method". As a result, nanosheets were fabricated and characterized by digital optical microscopy, scanning electron microscopy, and atomic force microscopy. The nanosheets were found to have a minimum thickness of ∼15 nm and a lateral size of several micrometers. As the first example of thiocyanato-bridged coordination nanosheets, these materials extend the scope of 2D materials and potentially pave the way toward developing nanolayered materials.

Intrinsic room-temperature ferromagnetism in a two-dimensional semiconducting metal-organic framework

The development of two-dimensional (2D) magnetic semiconductors with room-temperature ferromagnetism is a significant challenge in materials science and is important for the development of next-generation spintronic devices. Herein, we demonstrate that a 2D semiconducting antiferromagnetic Cu-MOF can be endowed with intrinsic room-temperature ferromagnetic coupling using a ligand cleavage strategy to regulate the inner magnetic interaction within the Cu dimers. Using the element-selective X-ray magnetic circular dichroism (XMCD) technique, we provide unambiguous evidence for intrinsic ferromagnetism. Exhaustive structural characterizations confirm that the change of magnetic coupling is caused by the increased distance between Cu atoms within a Cu dimer. Theoretical calculations reveal that the ferromagnetic coupling is enhanced with the increased Cu-Cu distance, which depresses the hybridization between 3d orbitals of nearest Cu atoms. Our work provides an effective avenue to design and fabricate MOF-based semiconducting room-temperature ferromagnetic materials and promotes their practical applications in next-generation spintronic devices.

Exfoliation of 2D Metal-Organic Frameworks: toward Advanced Scalable Materials for Optical Sensing

Two-dimensional metal-organic frameworks (MOFs) occupy a special place among the large family of functional 2D materials. Even at a monolayer level, 2D MOFs exhibit unique sensing, separation, catalytic, electronic, and conductive properties due to the combination of porosity and organo-inorganic nature. However, lab-to-fab transfer for 2D MOF layers faces the challenge of their scalability, limited by weak interactions between the organic and inorganic building blocks. Here, comparing three top-down approaches to fabricate 2D MOF layers (sonication, freeze-thaw, and mechanical exfoliation), The technological criteria have established for creation of the layers of the thickness up to 1 nm with a record aspect ratio up to 2*10^4:1. The freezing-thaw and mechanical exfoliation are the most optimal approaches; wherein the rate and manufacturability of the mechanical exfoliation rivaling the greatest scalability of 2D MOF layers obtained by freezing-thaw (21300:1 vs 1330:1 aspect ratio), leaving the sonication approach behind (with a record 900:1 aspect ratio) have discovered. The high quality 2D MOF layers with a record aspect ratio demonstrate unique optical sensitivity to solvents of a varied polarity, which opens the way to fabricate scalable and freestanding 2D MOF-based atomically thin chemo-optical sensors by industry-oriented approach.

Bibliometric and visualized analysis of metal-organic frameworks in biomedical application

Background: Metal-organic frameworks (MOFs) are hybrid materials composed of metal ions or clusters and organic ligands that spontaneously assemble via coordination bonds to create intramolecular pores, which have recently been widely used in biomedicine due to their porosity, structural, and functional diversity. They are used in biomedical applications, including biosensing, drug delivery, bioimaging, and antimicrobial activities. Our study aims to provide scholars with a comprehensive overview of the research situations, trends, and hotspots in biomedical applications of MOFs through a bibliometric analysis of publications from 2002 to 2022. Methods: On 19 January 2023, the Web of Science Core Collection was searched to review and analyze MOFs applications in the biomedical field. A total of 3,408 studies published between 2002 and 2022 were retrieved and examined, with information such as publication year, country/region, institution, author, journal, references, and keywords. Research hotspots were extracted and analyzed using the Bibliometrix R-package, VOSviewer, and CiteSpace. Results: We showed that researchers from 72 countries published articles on MOFs in biomedical applications, with China producing the most publications. The Chinese Academy of Science was the most prolific contributor to these publications among 2,209 institutions that made contributions. Reference co-citation analysis classifies references into 8 clusters: synergistic cancer therapy, efficient photodynamic therapy, metal-organic framework encapsulation, selective fluorescence, luminescent probes, drug delivery, enhanced photodynamic therapy, and metal-organic framework-based nanozymes. Keyword co-occurrence analysis divided keywords into 6 clusters: biosensors, photodynamic therapy, drug delivery, cancer therapy and bioimaging, nanoparticles, and antibacterial applications. Research frontier keywords were represented by chemodynamic therapy (2020-2022) and hydrogen peroxide (2020-2022). Conclusion: Using bibliometric methods and manual review, this review provides a systematic overview of research on MOFs in biomedical applications, filling an existing gap. The burst keyword analysis revealed that chemodynamic therapy and hydrogen peroxide are the prominent research frontiers and hot spots. MOFs can catalyze Fenton or Fenton-like reactions to generate hydroxyl radicals, making them promising materials for chemodynamic therapy. MOF-based biosensors can detect hydrogen peroxide in various biological samples for diagnosing diseases. MOFs have a wide range of research prospects for biomedical applications.

Exploring Spin-Phonon Coupling in Magnetic 2D Metal-Organic Frameworks

Layered magnetic metal-organic frameworks (MOFs) are an emerging class of materials that can combine the advantages of both MOFs and 2D magnetic crystals. The recent discovery of large coercivity and long-range magnetic ordering up to 515 K in a layered MOF of general formula MCl₂(pyz)₂ (M = transition metal, pyz = pyrazine) offers an exciting versatile platform to achieve high-T_C magnetism at the 2D limit. In this work, we investigate the exfoliation feasibility down to the monolayer of VCl₂(pyz)₂ and CrCl₂(pyz)₂ by means of first-principles calculations. We explore their structural, electronic, magnetic and vibrational properties, as well as the effect of halide substitution. Then, we provide a full analysis of the spin-phonon coupling (SPC) in both 2D derivatives. Our calculations reveal a low SPC and thermal evolution of the magnetic exchange interactions and single-ion anisotropy mainly governed by low-frequency phonon modes. Finally, we provide chemical insights to improve the performance of these magnetic 2D MOFs based on the effective manipulation of the phonon modes that can present a major impact on their magnetic properties.

Structure and Magnetic Properties of Pseudo-1D Chromium Thiolate Coordination Polymers

The synthesis, structure, and magnetic properties of two novel, pseudo-one-dimensional (1D) chromium thiolate coordination polymers (CPs), CrBTT and Cr₂BDT₃, are reported. The structures of these materials were determined using X-ray powder diffraction revealing highly symmetric 1D chains embedded within a CP framework. The magnetic coupling of this chain system was measured by SQUID magnetometry, revealing a switch from antiferromagnetic to ferromagnetic behavior dictated by the angular geometrical constraints within the CP scaffold consistent with the Goodenough-Kanamori-Anderson rules. Intrachain magnetic coupling constants J_NN of -32.0 and +5.7 K were found for CrBTT and Cr₂BDT₃, respectively, using the 1D Bonner-Fisher model of magnetism. The band structure of these materials has also been examined by optical spectroscopy and density functional theory calculations revealing semiconducting behavior. Our findings here demonstrate how CP scaffolds can support idealized low-dimensional structural motifs and dictate magnetic interactions through tuning of geometry and inter-spin couplings.

2D Metal-Organic Frameworks: Properties, Synthesis, and Applications in Electrochemical and Optical Biosensors

Two-dimensional (2D) nanomaterials like graphene, layered double hydroxides, etc., have received increasing attention owing to their unique properties imparted by their 2D structure. The newest member in this family is based on metal-organic frameworks (MOFs), which have been long known for their exceptional physicochemical properties-high surface area, tunable pore size, catalytic properties, etc., to list a few. 2D MOFs are promising materials for various applications as they combine the exciting properties of 2D materials and MOFs. Recently, they have been extensively used in biosensors by virtue of their enormous surface area and abundant, accessible active sites. In this review, we provide a synopsis of the recent progress in the field of 2D MOFs for sensor applications. Initially, the properties and synthesis techniques of 2D MOFs are briefly outlined with examples. Further, electrochemical and optical biosensors based on 2D MOFs are summarized, and the associated challenges are outlined.

Low-Dimensional Metal-Organic Magnets as a Route toward the S = 2 Haldane Phase

Metal-organic magnets (MOMs), modular magnetic materials where metal atoms are connected by organic linkers, are promising candidates for next-generation quantum technologies. MOMs readily form low-dimensional structures and so are ideal systems to realize physical examples of key quantum models, including the Haldane phase, where a topological excitation gap occurs in integer-spin antiferromagnetic (AFM) chains. Thus, far the Haldane phase has only been identified for S = 1, with S ≥ 2 still unrealized because the larger spin imposes more stringent requirements on the magnetic interactions. Here, we report the structure and magnetic properties of CrCl₂(pym) (pym = pyrimidine), a new quasi-1D S = 2 AFM MOM. We show, using X-ray and neutron diffraction, bulk property measurements, density-functional theory calculations, and inelastic neutron spectroscopy (INS), that CrCl₂(pym) consists of AFM CrCl₂ spin chains (J₁ = -1.13(4) meV) which are weakly ferromagnetically coupled through bridging pym (J₂ = 0.10(2) meV), with easy-axis anisotropy (D = -0.15(3) meV). We find that, although small compared to J₁, these additional interactions are sufficient to prevent observation of the Haldane phase in this material. Nevertheless, the proximity to the Haldane phase together with the modularity of MOMs suggests that layered Cr(II) MOMs are a promising family to search for the elusive S = 2 Haldane phase.

Modular Assembly of Isostructural Mixed-Ligand Uranyl Coordination Polymers Based on a Patterning Strategy

Controlling the orderly assembly of molecular building blocks for the formation of the desired architectural, chemical, and physical properties of the resulting solid-state materials remains a long-term goal and deserves to be examined. In this work, we propose a patterning strategy for modular assembly and structural regulation of mixed-ligand uranyl coordination polymers (CPs) through the combination of couples of organic ligands with complementary molecular geometry and well-matched coordination modes. By using a 5-(p-tolyldiazenyl)isophthalic acid ligand (H₂ptdi) with different rigid linear bicarboxylic acid linkers to construct a well-defined ladder-like pattern, five novel isostructural uranyl coordination polymers, [(UO)₂(ptdi)(bdc)_0.5](dma) (1), [(UO)₂(ptdi)(bpdc)_0.5](dma) (2), [(UO)₂(ptdi)(tpdc)_0.5](dma) (3), [(UO)₂(ptdi)(ndc)_0.5](dma) (4), and [(UO)₂(ptdi) (pdc)_0.5](dma) (5) {H₂bdc, 1,4-dicarboxybenzene; H₂bpdc, 4,4'-biphenyldicarboxylic acid; H₂tpdc, terphenyl-4,4″-dicarboxylic acid; H₂ndc, 2,6-naphthalenedicarboxylic acid; H₂pdc, 1,6-pyrenedicarboxylic acid; [dma]⁺, [(CH₃)₂NH₂]⁺}, were successfully synthesized. Structural analysis reveals that 1-5 have similar ladder-like units but different sizes of one-dimensional nanochannels and interlayer spacing due to the different lengths and widths of the linkers. Because of the changes in interlayer spacing of these isostructural cationic frameworks, differences in the performance of Eu³⁺ ion exchange with [dma]⁺ are observed. Moreover, those compounds with high phase purity have been further characterized by thermogravimetric analysis, infrared spectroscopy, and luminescence spectroscopy, element analysis, PXRD and UV spectroscopy. Among them, compound 3 with strong fluorescence can selectively detect Fe³⁺ over several competing metal cations in aqueous solution. This work not only provides a feasible patterning method for effectively regulating the modular synthesis of functional coordination polymers but also enriches the library of uranyl-based coordination polymers with intriguing structures and functionality.

Two-dimensional heterotriangulene-based manganese organic frameworks: bipolar magnetic and half semiconductors with perpendicular magnetocrystalline anisotropy

Two-dimensional (2D) organic intrinsic magnetic semiconductors have potential applications in low-dimensional organic spintronic devices due to their remarkable physical properties. However, 2D metal-organic frameworks with magnetic and semiconducting properties are rare. In this work, the electronic and magnetic properties of 2D heterotriangulene-based manganese organic frameworks including triphenylamine (TPA) and triphenylborane (TPB) organic ligands with methylene (M), carbonyl (C) or oxygen (O) coordination groups were studied by first-principles calculations. XTPA-Mn (X = M and O) is a bipolar magnetic semiconductor with a large spin-flip band gap. CTPA-Mn and XTPB-Mn (X = M, C and O) are half semiconductors with perpendicular magnetocrystalline anisotropy. The electronic properties of materials ranging from half semiconductors to bipolar magnetic semiconductors appear in CTPA-Mn and XTPB-Mn (X = M and C) at biaxial strains. XTPA-Mn and XTPB-Mn with a frustrated antiferromagnetic configuration are semiconductors with good ductility and stability. These results enrich the diversity of 2D organic intrinsic magnetic semiconductors, which have potential applications in spintronic devices.

Post-exfoliation functionalisation of metal-organic framework nanosheets via click chemistry

The liquid exfoliation of layered metal-organic frameworks (MOFs) to form nanosheets (MONs) exposes buried functional groups making them useful in a range of sensing and catalytic applications. Here we show how high yielding click reactions can be used post-exfoliation to systematically modify the surface chemistry of MONs allowing for tuning of their surface properties and their use in new applications. A layered amino-functionalised framework is converted through conventional post-synthetic functionalisation of the bulk MOF to form azide functionalised frameworks of up to >99% yield. Ultrasonic liquid exfoliation is then used to form few-layer nanosheets, which are further functionalised through post exfoliation functionalisation using Cu(I)-catalysed azide-alkyne cycloaddition reactions. Here we demonstrate the advantages of post-exfoliation functionalisation in enabling: (1) a range of functional groups to be incorporated in high yields; (2) tuning of nanosheet surface properties without the need for extensive recharacterisation; (3) the addition of fluorescent functional groups to enable their use in the sensing of hazardous nitrobenzene. We anticipate that the versatility of different functional groups that can be introduced through high yielding click reactions will lead to advances in the use of MONs and other 2D materials for a variety of applications.

Strain Switching in van der Waals Heterostructures Triggered by a Spin-Crossover Metal-Organic Framework

Van der Waals heterostructures (vdWHs) provide the possibility of engineering new materials with emergent functionalities that are not accessible in another way. These heterostructures are formed by assembling layers of different materials used as building blocks. Beyond inorganic 2D crystals, layered molecular materials remain still rather unexplored, with only few examples regarding their isolation as atomically thin layers. Here, the family of van der Waals heterostructures is enlarged by introducing a molecular building block able to produce strain: the so-called spin-crossover (SCO). In these metal-organic materials, a spin transition can be induced by applying external stimuli like light, temperature, pressure, or an electric field. In particular, smart vdWHs are prepared in which the electronic and optical properties of the 2D material (graphene and WSe₂ ) are clearly switched by the strain concomitant to the spin transition. These molecular/inorganic vdWHs represent the deterministic incorporation of bistable molecular layers with other 2D crystals of interest in the emergent fields of straintronics and band engineering in low-dimensional materials.

Multivariate sodalite zeolitic imidazolate frameworks: a direct solvent-free synthesis

Different mixed-ligand Zeolitic Imidazolate Frameworks (ZIFs) with sodalite topology, i.e. isoreticular to ZIF-8, unachievable by conventional synthetic routes, have been prepared using a solvent-free methodology. In particular, the versatility of this method is demonstrated with three different metal centres (Zn, Co and Fe) and binary combinations of three different ligands (2-methylimidazole, 2-ethylimidazole and 2-methylbenzimidazole). One combination of ligands, 2-ethylimidazole and 2-methylbenzimidazole, results in the formation of SOD frameworks for the three metal centres despite this topology not being obtained for the individual ligands. Theoretical calculations confirm that this topology is the lowest in energy upon ligand mixing.

A fluorinated 2D magnetic coordination polymer

Herein we show the versatility of coordination chemistry to design and expand a family of 2D materials by incorporating F groups at the surface of the layers. Through the use of a prefuntionalized organic linker with F groups, it is possible to achieve a layered magnetic material based on Fe(II) centers that are chemically stable in open air, contrary to the known 2D inorganic magnetic materials. The high quality of the single crystals and their robustness allow to fabricate 2D molecular materials by micromechanical exfoliation, preserving the crystalline nature of these layers together with the desired functionalization.

Connectivity Replication of Neutral Eu3+- and Tb3+-Based Metal-Organic Frameworks (MOFs) from Anionic Cd2+-Based MOF Crystallites

Neutral three-dimensional Eu³⁺- and Tb³⁺-based metal-organic frameworks (MOFs) with 4-fold interpenetration can be produced by seeding with anionic Cd²⁺-based MOF crystallites of identical connectivity. In the absence of these crystallites, two-dimensional networks are formed.

Designing Two-Dimensional Versatile Room-Temperature Ferromagnets via Assembling Large-Scale Magnetic Quantum Dots

Two-dimensional (2D) ferromagnets possess astonishing potential in new-concept spintronics. However, most of the reported intrinsic 2D ferromagnets show a low Curie temperature far below room temperature. Here, we propose a series of 2D magnetic covalent and metal organic frameworks (COFs/MOFs) by assembling triangular zigzag graphene quantum dots (TZGDs) with various linkages, involving small-sized TZGDs, nonmetal atoms, magnetic metal atoms, and molecules. Upon first-principles calculations, we demonstrate 2D magnetic semiconductors with an enhanced Curie temperature of up to 472 K can be realized through the strong p(d)-p direct exchange interaction between TZGDs and linkages. Particularly, the TZGD size hardly affects the Curie temperature, whereas linkages can modulate the Curie temperature significantly. The TZGD size and linkages can regulate the electronic and magnetic properties of TZGD-based 2D ferromagnets. Our results confirm the possibility of designing 2D ferromagnets based on TZGDs and motivate the research of 2D ferromagnets on magnetic quantum dots and molecular magnets.

Chemical Design and Magnetic Ordering in Thin Layers of 2D Metal-Organic Frameworks (MOFs)

Through rational chemical design, and thanks to the hybrid nature of metal-organic frameworks (MOFs), it is possible to prepare molecule-based 2D magnetic materials stable at ambient conditions. Here, we illustrate the versatility of this approach by changing both the metallic nodes and the ligands in a family of layered MOFs that allows the tuning of their magnetic properties. Specifically, the reaction of benzimidazole-type ligands with different metal centers (MII = Fe, Co, Mn, Zn) in a solvent-free synthesis produces a family of crystalline materials, denoted as MUV-1(M), which order antiferromagnetically with critical temperatures that depend on M. Furthermore, the incorporation of additional substituents in the ligand results in a novel system, denoted as MUV-8, formed by covalently bound magnetic double layers interconnected by van der Waals interactions, a topology that is very rare in the field of 2D materials and unprecedented for 2D magnets. These layered materials are robust enough to be mechanically exfoliated down to a few layers with large lateral dimensions. Finally, the robustness and crystallinity of these layered MOFs allow the fabrication of nanomechanical resonators that can be used to detect─through laser interferometry─the magnetic order in thin layers of these 2D molecule-based antiferromagnets.

Modern physical methods for the molecular design of single-molecule magnets

Many paramagnetic metal complexes have emerged as unique magnetic materials (single-molecule magnets), which behave as conventional magnets at the single-molecule level, thereby making it possible to use them in modern devices for data storage and processing. The rational design of these complexes, however, requires a deep understanding of the physical laws behind a single-molecule magnet behaviour, the mechanisms of magnetic relaxation that determines the magnetic properties and the relationship of these properties with the structure of single-molecule magnets. This review focuses on the physical methods providing such understanding, including different versions and various combinations of magnetometry, electron paramagnetic and nuclear magnetic resonance spectroscopy, optical spectroscopy and X-ray diffraction. Many of these methods are traditionally used to determine the composition and structure of new chemical compounds. However, they are rarely applied to study molecular magnetism.

The bibliography includes 224 references.

Spin-crossover nanoparticles anchored on MoS2 layers for heterostructures with tunable strain driven by thermal or light-induced spin switching

In the past few years, the effect of strain on the optical and electronic properties of MoS₂ layers has attracted particular attention as it can improve the performance of optoelectronic and spintronic devices. Although several approaches have been explored, strain is typically externally applied on the two-dimensional material. In this work, we describe the preparation of a reversible 'self-strainable' system in which the strain is generated at the molecular level by one component of a MoS₂-based composite material. Spin-crossover nanoparticles were covalently grafted onto functionalized layers of semiconducting MoS₂ to form a hybrid heterostructure. Their ability to switch between two spin states on applying an external stimulus (light irradiation or temperature change) serves to generate strain over the MoS₂ layer. A volume change accompanies this spin crossover, and the created strain induces a substantial and reversible change of the electrical and optical properties of the heterostructure.

Luminescent and Magnetic Tb-MOF Flakes Deposited on Silicon

The synthesis of a terbium-based 2D metal–organic framework (MOF), of formula [Tb(MeCOO)(PhCOO)₂] (1), a crystalline material formed by neutral nanosheets held together by Van der Waals interactions, is presented. The material can be easily exfoliated by sonication and deposited onto different substrates. Uniform distributions of Tb-2D MOF flakes onto silicon were obtained by spin-coating. We report the luminescent and magnetic properties of the deposited flakes compared with those of the bulk. Complex 1 is luminescent in the visible and has a sizeable quantum yield of QY = 61% upon excitation at 280 nm. Photoluminescence measurements performed using a micro-Raman set up allowed us to characterize the luminescent spectra of individual flakes on silicon. Magnetization measurements of flakes-on-silicon with the applied magnetic field in-plane and out-of-plane display anisotropy. Ac susceptibility measurements show that 1 in bulk exhibits field-induced slow relaxation of the magnetization through two relaxation paths and the slowest one, with a relaxation time of τ_lf ≈ 0.5 s, is assigned to a direct process mechanism. The reported exfoliation of lanthanide 2D-MOFs onto substrates is an attractive approach for the development of multifunctional materials and devices for different applications.

Interlayer hydrogen bonding directed magnetic properties for a different number of water-intercalated structural heterometallic phosphates based on paddlewheel units Ru2(PO4)46

Layered heterometallic phosphates {Mn(H2O)4}2Mn(H2O)2Ru2(PO4)4(H2O)2 (1) with a new topology were constructed from Ru2(PO4)46- and Mn2+ in the presence of anions as assisting reactants whose alkaline strength plays a key role in directing a different number of lattice water-intercalated structures. In the presence of CO32- and SO42- as assisting reactants, the assembling reaction in the aqueous solution at room temperature results in compounds 1·10H2O and 1·4H2O, respectively. Single-crystal X-ray diffraction analysis reveals that compounds 1·10H2O and 1·4H2O crystallize in orthorhombic space group Pbca and monoclinic space group P21/c, respectively. The layered structure of 1 is constructed by alternating Ru2O10 tetragonal dipyramid and MnO6 octahedra bridged by PO4 tetrahedra. The neutral heterometallic phosphate layers of 1 are separated by a different number of interlayer lattice water molecules, and hydrogen bonds are responsible for the neutral inorganic layer connection. Magnetism measurements show that compound 1·10H2O exhibits a soft magnet behaviour ordering below 8.5 K with indirect hydrogen bonding between these ferrimagnetic layers, and a reentrant spin-glass-like transition is observed for compound 1·4H2O, exhibiting two steps transition at 8.0 and 12 K, due to a strong competition between intralayer magnetic coupling and interlayer antiferromagnetic interactions mediated through the direct hydrogen bonding.

Chemical kinetic mechanisms and scaling of two-dimensional polymers via irreversible solution-phase reactions

Two-dimensional (2D) polymers are extended networks of multi-functional repeating units that are covalently linked together but confined to a single plane. The past decade has witnessed a surge in interest and effort toward producing and utilizing 2D polymers. However, facile synthesis schemes suitable for mass production are yet to be realized. In addition, unifying theories to describe the 2D polymerization process, such as those for linear polymers, have not yet been established. Herein, we perform a chemical kinetic simulation to study the recent synthesis of 2D polymers in homogeneous solution with irreversible chemistry. We show that reaction sites for polymerization in 2D always scale unfavorably compared to 3D, growing as molecular weight to the 1/2 power vs 2/3 power for 3D. However, certain mechanisms can effectively suppress out-of-plane defect formation and subsequent 3D growth. We consider two such mechanisms, which we call bond-planarity and templated autocatalysis. In the first, although single bonds can easily rotate out-of-plane to render polymerization in 3D, some double-bond linkages prefer a planar configuration. In the second mechanism, stacked 2D plates may act as van der Waals templates for each other to enhance growth, which leads to an autocatalysis. When linkage reactions possess a 1000:1 selectivity (γ) for staying in plane vs rotating, solution-synthesized 2D polymers can have comparable size and yield with those synthesized from confined polymerization on a surface. Autocatalysis could achieve similar effects when self-templating accelerates 2D growth by a factor β of 10⁶. A combined strategy relaxes the requirement of both mechanisms by over one order of magnitude. We map the dependence of molecular weight and yield for the 2D polymer on the reaction parameters, allowing experimental results to be used to estimate β and γ. Our calculations show for the first time from theory the feasibility of producing two-dimensional polymers from irreversible polymerization in solution.

A Multifunctional Dysprosium-Carboxylato 2D Metall-Organic Framework

We report the microwave assisted synthesis of a bidimensional (2D) MOF of formula [Dy(MeCOO)(PhCOO)₂ ]_n (1) and its magnetically diluted analogue [La_0.9 Dy_0.1 (MeCOO)(PhCOO)₂ ] (1 d). 1 is a 2D material with single-ion-magnet (SIM) behaviour and 1 d is a multifunctional, magnetic and luminescent 2D material. 1 can be exfoliated into stable nanosheets by sonication.

A Journey in Lanthanide Coordination Chemistry: From Evaporable Dimers to Magnetic Materials and Luminescent Devices

ConspectusLanthanide ions are prime ingredients for the design of compounds, materials, and devices with unique magnetic and optical properties. Accordingly, coordination chemistry is one of the best tools for building molecular edifices from these ions because it allows careful control of the ions' environment and of the dimensionality of the final compound.In this Account, we review our results on lanthanide-based dimers. We show how a pure fundamental study on lanthanide coordination chemistry allows the investigation of a full continuum of results from the compound to materials and then to devices. The conversion of molecules into materials is a tricky task because it requires strong molecular robustness toward the surface deposition processes as well as the preservation and detectability of the molecular properties in the material. Additionally, the passage of a material toward a device implies a material with a given function, for example, a tailored response to an external stimulus.To do so, we targeted neutral and isolated molecules whose transfer on surfaces by chemi- or physisorption is much easier than that of charged molecules or extended coordination networks. Then, we focused on molecules with very strong evaporability to avoid wet chemistry deposition processes that are more likely to damage the molecules and/or distort their geometries.We thus designed lanthanide dimers based on fluorinated β-diketonates and pyridine-N-oxide ligands. As expected, they show remarkable evaporability but also strong luminescence and interesting magnetic behavior because they behave as single-molecule magnets (SMMs). Ligand substitutions and stoichiometric modifications allow the optimization of the geometric organization of the dimers in the crystal packing as well as their evaporability, SMM behavior, luminescent properties, or their ability to be anchored on surfaces. Most of all, this family of molecules shows a strong ability to form thick films on various substrates. This allows converting these molecules to magnetic materials and luminescent devices.Magnetic materials can be designed by creating thick films of the dimers deposited on gold. These films have been designed and investigated with the most advanced techniques of on-surface imaging (atomic force microscopy, AFM), on-surface physicochemical characterization (X-ray photoelectron spectroscopy (XPS), time of flight-secondary ion mass spectroscopy (Tof-SIMS)), and on-surface magnetic investigation (low-energy muon spin relaxation (LE-μSR)). Contrary to what was previously observed on other SMM films, no depth dependence of the SMM behavior was observed. This means that the dimers do not suffer from the vacuum or substrate interface and behave similarly, whatever their localization. This exceptional magnetic robustness is a key ingredient in the creation of materials for molecular magnetic data storage.Luminescent devices can be obtained by layering molecular films of the dimers with a copper-rich solid-state electrolyte between ITO/Pt electrodes. The electromigration of Cu²⁺ ions into films of Eu³⁺, Tb³⁺, and Dy³⁺ dimers quenches their luminescence. This luminescence tuning by electromigration is reversible, and this setup can be considered to be a proof of concept of full solid-state luminescent device where reversible coding can be tailored by an electric field. It is envisioned for optical data storage purposes. In the future, it could also benefit from the SMM properties of the molecules to pave the way toward multifunctional molecular data storage devices.

Crystalline Free-Standing Two-Dimensional Zwitterionic Organic Nanosheets for Efficient Conduction of Lithium Ions

Crystalline two-dimensional organic nanosheets (2D-ONs) having atomic or near-atomic thickness with infinite lateral dimensions are of crucial significance for their possible application as a material for energy storage. The presence of nanofluidic channels with a designed array of molecular interlayers in such 2D-ONs, for a favorable lithium-ion transport, has special significance for improving the efficacy of lithium-ion batteries. However, the rational design of crystalline 2D-ONs remains a challenge because of the lack of appropriate monomers and convenient preparation methods. Herein, we report a unique lithium-ion conducting behavior of zwitterionic 2D-ONs, formed through self-assembly of a small organic molecule AM-1. Different microscopic studies confirm the near-atomic thickness (∼3.5 nm) of these 2D-ONs. Results of the single-crystal X-ray diffraction studies confirm the presence of a one-dimensional (1D) channel in crystalline 2D-ONs, which was generated during the self-assembly process of the zwitterionic monomer scaffold. The presence of immobilized ionic centers with well-defined directional channels in the 2D-ONs favors the transportation of lithium ions with a room-temperature lithium-ion conductivity of 5.14 × 10^-5 S cm^-1, which is rather unique for self-assembled 2D-ONs.

Multifunctional layered black phosphorene-based nanoplatform for disease diagnosis and treatment: a review

As an outstanding two-dimensional material, black phosphorene, has attracted significant attention in the biomedicine field due to its large surface area, strong optical absorption, distinct bioactivity, excellent biocompatibility, and high biodegradability. In this review, the preparation and properties of black phosphorene are summarized first. Thereafter, black phosphorene-based multifunctional platforms employed for the diagnosis and treatment of diseases, including cancer, bone injuries, brain diseases, progressive oxidative diseases, and kidney injury, are reviewed in detail. This review provides a better understanding of the exciting properties of black phosphorene, such as its high drug-loading efficiency, photothermal conversion capability, high ¹O₂ generation efficiency, and high electrical conductivity, as well as how these properties can be exploited in biomedicine. Finally, the research perspectives of black phosphorene are discussed.

Two-dimensional metal organic frameworks for biomedical applications

Two-dimensional (2D) metal organic frameworks (MOFs), are an emerging class of layered nanomaterials with well-defined structure and modular composition. The unique pore structure, high flexibility, tunability, and ability to introduce desired functionality within the structural framework, have led to potential use of MOFs in biomedical applications. This article critically reviews the application of 2D MOFs for therapeutic delivery, tissue engineering, bioimaging, and biosensing. Further, discussion on the challenges and strategies in next generation of 2D MOFs are also included. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

MOF-Mediated Synthesis of Supported Fe-Doped Pd Nanoparticles under Mild Conditions for Magnetically Recoverable Catalysis*

Metal-organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous catalyst for hydrogenation of nitroarenes and nitrobenzene coupling with benzaldehyde has been evaluated, proving it to be an efficient and reusable catalyst.

Chemical engineering of quasicrystal approximants in lanthanide-based coordination solids

Tessellation of self-assembling molecular building blocks is a promising strategy to design metal-organic materials exhibiting geometrical frustration and ensuing frustrated physical properties. Appearing in two-dimensional quasiperiodic phases, tilings consisting of five-vertex nodes are regarded as approximants for quasicrystals. Unfortunately, these structural motifs are exceedingly rare due to the complications of acquiring five-fold coordination confined to the plane. Lanthanide ions display the sufficient coordinative plasticity, and large ionic radii, to allow their incorporation into irregular molecule-based arrays. We herein present the use of ytterbium(II) as a five-vertex node in a two-dimensional coordination solid, YbI₂(4,4'-bipyridine)_2.5. The semi-regular Archimedean tessellation structure verges on quasicrystallinity and paves the way for lanthanide-based metal-organic materials with interesting photonic and magnetic properties.

Strengthening the Magnetic Interactions in Pseudobinary First-Row Transition Metal Thiocyanates, M(NCS)2

Understanding the effect of chemical composition on the strength of magnetic interactions is key to the design of magnets with high operating temperatures. The magnetic divalent first-row transition metal (TM) thiocyanates are a class of chemically simple layered molecular frameworks. Here, we report two new members of the family, manganese(II) thiocyanate, Mn(NCS)₂, and iron(II) thiocyanate, Fe(NCS)₂. Using magnetic susceptibility measurements on these materials and on cobalt(II) thiocyanate and nickel(II) thiocyanate, Co(NCS)₂ and Ni(NCS)₂, respectively, we identify significantly stronger net antiferromagnetic interactions between the earlier TM ions-a decrease in the Weiss constant, θ, from 29 K for Ni(NCS)₂ to -115 K for Mn(NCS)₂-a consequence of more diffuse 3d orbitals, increased orbital overlap, and increasing numbers of unpaired t_2g electrons. We elucidate the magnetic structures of these materials: Mn(NCS)₂, Fe(NCS)₂, and Co(NCS)₂ order into the same antiferromagnetic commensurate ground state, while Ni(NCS)₂ adopts a ground state structure consisting of ferromagnetically ordered layers stacked antiferromagnetically. We show that significantly stronger exchange interactions can be realized in these thiocyanate frameworks by using earlier TMs.

Unimolecularly thick monosheets of vinyl polymers fabricated in metal-organic frameworks

Polymers with two-dimensional (2D) network topologies are currently gaining significant attention due to their unique properties that originate from their regulated conformations. However, in contrast to conventional 1D- and 3D-networked macromolecules, the synthesis of such 2D networks provides challenges for polymer chemists because of the nature of the networking polymerisation reaction, which occurs in a spatially random fashion when conventional solution-phase synthesis is performed. Here we report a versatile synthesis of polymeric monosheets with unimolecularly thick networking architectures by exploiting the 2D nanospaces of metal–organic frameworks (MOFs) as reaction templates. Crosslinking radical polymerisation in the 2D nanospaces of pillared-layer-type MOFs affords monosheets of typical vinyl polymers and can be carried out on the gram scale. Remarkably, the prepared polymer monosheets are highly soluble in organic solvents and show atypical thermal and rheological properties that result from their 2D-regulated conformations that cannot be adopted by their 1D or 3D analogues.

Unlike 1D and 3D-networked macromolecules, the synthesis of 2D molecular networks is challenging because of the nature of the polymerisation reaction. Here the authors report the synthesis of polymeric monosheets with unimolecularly thick networks by exploiting the 2D nanospaces of metal–organic frameworks as reaction templates.

Magnetic and electronic phase transitions probed by nanomechanical resonators

The reduced dimensionality of two-dimensional (2D) materials results in characteristic types of magnetically and electronically ordered phases. However, only few methods are available to study this order, in particular in ultrathin insulating antiferromagnets that couple weakly to magnetic and electronic probes. Here, we demonstrate that phase transitions in thin membranes of 2D antiferromagnetic FePS₃, MnPS₃ and NiPS₃ can be probed mechanically via the temperature-dependent resonance frequency and quality factor. The observed relation between mechanical motion and antiferromagnetic order is shown to be mediated by the specific heat and reveals a strong dependence of the Néel temperature of FePS₃ on electrostatically induced strain. The methodology is not restricted to magnetic order, as we demonstrate by probing an electronic charge-density-wave phase in 2H-TaS₂. It thus offers the potential to characterize phase transitions in a wide variety of materials, including those that are antiferromagnetic, insulating or so thin that conventional bulk characterization methods become unsuitable.

Fundamental Insights into the Covalent Silane Functionalization of NiFe Layered Double Hydroxides

Layered double hydroxides (LDHs) are a class of 2D anionic materials exhibiting wide chemical versatility and promising applications in different fields, ranging from catalysis to energy storage and conversion. However, the covalent chemistry of this kind of 2D materials is still barely explored. Herein, the covalent functionalization with silanes of a magnetic NiFe-LDH is reported. The synthetic route consists of a topochemical approach followed by anion exchange reaction with surfactant molecules prior to covalent functionalization with the (3-aminopropyl)triethoxysilane (APTES) molecules. The functionalized NiFe-APTES was fully characterized by X-ray diffraction, infrared spectroscopy, electron microscopy, thermogravimetric analysis coupled with mass spectrometry and ²⁹ Si solid-state nuclear magnetic resonance, among others. The effect on the electronic properties of the functionalized LDH was investigated by a magnetic study in combination with Mössbauer spectroscopy. Moreover, the reversibility of the silane-functionalization at basic pH was demonstrated, and the quality of the resulting LDH was proven by studying the electrochemical performance in the oxygen evolution reaction in basic media. Furthermore, the anion exchange capability for the NiFe-APTES was tested employing Cr^VI , resulting in an increase of 200 % of the anion retention. This report allows for a new degree of tunability of LDHs, opening the door to the synthesis of new hybrid architectures and materials.

Blending functionalised ligands to form multivariate metal-organic framework nanosheets (MTV-MONs) with tuneable surface chemistry

We report a new approach to tuning the properties of metal-organic framework nanosheets (MONs) by blending functionalised ligands to produce multivariate MONs (MTV-MONs). This approach enabled not only fine tuning of the MONs properties, but also resulted in MTV-MONs that show enhanced performance compared to their single-ligand counterparts. Layered copper paddle-wheel based MOFs were synthesised incorporating two or more 2,5-difunctionalised-benzene-1,4-dicarboxylate (fu-BDC) ligands. Liquid ultrasonic exfoliation resulted in the formation of nanosheets down to monolayer thickness presenting multiple functional moieties. Blending of ligands with relatively hydrophilic (methoxy-propoxy) and hydrophobic (pentoxy) moieties resulted in MTV-MONs that showed enhanced dispersion in both polar and apolar solvents compared to either single-ligand parent MON as well as intermediary binding properties. Blending of different fu-BDC ligands with different length alkoxy chains (methoxy-pentoxy) allowed incorporation of up to five different ligands within a single MTV-MON, including ligands which do not form this structure individually. This study demonstrates the potential of blending multiple ligands within an MTV-MON to enable fine-tuning of their structure and properties but also create new nanosheets which are more than the sum of their parts.

Supramolecular Assemblies in Silver Complexes: Phase Transitions and the Role of the Halogen Bond

Weak interactions (hydrogen bonds, halogen bonds, CH···π and π-π stacking) can play a significant role in the formation of supramolecular assemblies with desired structural features. In this contribution, we report a systematic investigation on how a halogen bond (XB) can modulate the structural arrangement of silver supramolecular complexes. The complexes are composed of X-phenyl(bispyrazolyl)methane (X = Br, I) and I-alkynophenyl(bispyrazolyl)methane ligands functionalized in meta (L^3Br, L^3I) and para (L^4Br, L^4I, L^4CCI) positions on a phenyl ring with the purpose of providing different directionalities of the X function with respect to the N,N coordination system. The obtained [Ag(L)₂]⁺ moieties show remarkable geometric similarities, and the L^4Br, L^4I, and L^4CCI ligands exhibit the most conserved types of supramolecular arrangement that are sustained by XB. The increased σ-hole in L^4CCI with respect to L^4I leads to an occurrence of short (and strong) XB interactions with the anions. [Ag(L^4I)₂]PF₆ and [Ag(L^4I)₂]CF₃SO₃ are characterized by the presence of three different phases, and the single-crystal evolution from phase-1 (a honeycomb structure with large 1D cavities) to phase-3 (solventless) occurs by a stepwise decrease in the crystallization solvent content, which promotes an increase in XB interactions in the lattice. The present paper aims to provide useful tools for the selection of appropriate components for the use of coordination compounds to build supramolecular systems based on the halogen bond.

Metal-Organic Framework Magnets

Metal-organic frameworks represent the ultimate chemical platform on which to develop a new generation of designer magnets. In contrast to the inorganic solids that have dominated permanent magnet technology for decades, metal-organic frameworks offer numerous advantages, most notably the nearly infinite chemical space through which to synthesize predesigned and tunable structures with controllable properties. Moreover, the presence of a rigid, crystalline structure based on organic linkers enables the potential for permanent porosity and postsynthetic chemical modification of the inorganic and organic components. Despite these attributes, the realization of metal-organic magnets with high ordering temperatures represents a formidable challenge, owing largely to the typically weak magnetic exchange coupling mediated through organic linkers. Nevertheless, recent years have seen a number of exciting advances involving frameworks based on a wide range of metal ions and organic linkers. This review provides a survey of structurally characterized metal-organic frameworks that have been shown to exhibit magnetic order. Section 1 outlines the need for new magnets and the potential role of metal-organic frameworks toward that end, and it briefly introduces the classes of magnets and the experimental methods used to characterize them. Section 2 describes early milestones and key advances in metal-organic magnet research that laid the foundation for structurally characterized metal-organic framework magnets. Sections 3 and 4 then outline the literature of metal-organic framework magnets based on diamagnetic and radical organic linkers, respectively. Finally, Section 5 concludes with some potential strategies for increasing the ordering temperatures of metal-organic framework magnets while maintaining structural integrity and additional function.

Coordination assembly of 2D ordered organic metal chalcogenides with widely tunable electronic band gaps

Engineering the band gap chemically by organic molecules is a powerful tool with which to optimize the properties of inorganic 2D materials. The obtained materials are however still limited by inhomogeneous compositions and properties at nanoscale and small adjustable band gap ranges. To overcome these problems in the traditional exfoliation and then organic modification strategy, an organic modification and then exfoliation strategy was explored in this work for preparing 2D organic metal chalcogenides (OMCs). Unlike the reported organically modified 2D materials, the inorganic layers of OMCs are fully covered by long-range ordered organic functional groups. By changing the electron-donating ability of the organic functional groups and the electronegativity of the metals, the band gaps of OMCs were varied by 0.83 eV and their conductivities were modulated by 9 orders of magnitude, which are 2 and 107 times higher than the highest values observed in the reported chemical methods, respectively.

Simultaneous regulation of optical properties and cellular behaviors of gold nanoclusters by pre-engineering the biotemplates

Upon pre-engineering the surface charged groups of biotemplates, both optical properties and cellular behaviors of fluorescent gold nanoclusters can be simultaneously modulated.

Nanoelectromechanical Sensors Based on Suspended 2D Materials

The unique properties and atomic thickness of two-dimensional (2D) materials enable smaller and better nanoelectromechanical sensors with novel functionalities. During the last decade, many studies have successfully shown the feasibility of using suspended membranes of 2D materials in pressure sensors, microphones, accelerometers, and mass and gas sensors. In this review, we explain the different sensing concepts and give an overview of the relevant material properties, fabrication routes, and device operation principles. Finally, we discuss sensor readout and integration methods and provide comparisons against the state of the art to show both the challenges and promises of 2D material-based nanoelectromechanical sensing.