Engineering high-energy-density sodium battery anodes for improved cycling with superconcentrated ionic-liquid electrolytes

Exploring the Impact of In Situ-Formed Solid-Electrolyte Interphase on the Cycling Performance of Aluminum Metal Anodes

Unwanted processes in metal anode batteries, e.g., non-uniform metal electrodeposition, electrolyte decomposition, and/or short-circuiting, are not fully captured by the electrolyte bulk solvation structure but rather defined by the electrode-electrolyte interface and its changes induced by cycling conditions. Specifically, for aluminum-ion batteries (AIBs), the role of the solid-electrolyte interphase (SEI) on the Al0 electrodeposition mechanism and associated changes during resting or cycling remain unclear. Here, we investigated the current-dependent changes at the electrified aluminum anode/ionic liquid electrolyte interface to reveal the conditions of the SEI formation leading to irreversible cycling in the AIBs. We identified that the mechanism of anode failure depends on the nature of the counter electrode, where the areal capacity and cycling current for Al0 electrodeposition dictates the number of successful cycles. Notwithstanding the differences behind unstable aluminum anode cycling in symmetrical cells and AIBs, the uniform removal of electrochemically inactive SEI components, e.g., oxide-rich or solvent-derived organic-rich interphases, leads to more efficient cycling behavior. These understandings raise the importance of using specific conditioning protocols for efficient cycling of the aluminum anode in conjugation with different cathode materials.

Long-life potassium metal batteries enabled by anion-derived solid electrolyte interphase using concentrated ionic liquid electrolytes

Potassium metal batteries (PMBs) show great potential as next-generation energy storage systems yet face challenges such as the dendritic growth of the potassium anode, leading to issues with cycle life and safety. This study reports a potassium salt-concentrated ionic liquid electrolyte (PCIL) consisting of potassium bis(fluorosulfonyl)imide (KFSI) and 1-methyl-1-propyl pyrrolidinium bis(fluorosulfonyl)imide (Pyr13FSI) to achieve long-life and, safe PMBs. PCIL presents several advantages including outstanding oxidation stability (≈5.2 V), decent ionic conductivity (4.0 mS cm-1 at 25 °C), and negligible flammability. Moreover, PCIL promotes the development of anion-derived solid-electrolyte interphase (SEI) with high inorganic content. This not only hinders the growth of potassium dendrites but also facilitates facile interfacial charge transfer kinetics. Benefiting from these advantages, PMBs (K||KVPO4F) employing PCIL exhibit remarkable cycle performances at both ambient and elevated temperatures (capacity retention after 300 cycles: 74.8% at 25 °C and 82.9% at 45 °C), surpassing the performance of conventional carbonate (1 M KPF6 EC/PC) and dilute potassium ionic liquid electrolyte (PIL). This work demonstrates the tangible capability of PCIL in realizing practical PMBs.

Molecular-Resolution Imaging of Ionic Liquid/Alkali Halide Interfaces with Varied Surface Charge Densities via Atomic Force Microscopy

When in contact with charged solid surfaces, ionic liquids (ILs) are known to form solvation structures consisting of alternating cation and anion layers. This phenomenon is considered to originate from the adsorption layer of counterions overcompensating the surface charge, so-called overscreening. However, the response of these layers to surfaces with near-zero or extremely high surface charge density (σ) remains inadequately understood. Here, we probe the solvation structure of ILs on alkali halide surfaces with varied surface orientations: nearly zero-charged RbI(100) and highly charged RbI(111), by employing frequency modulation atomic force microscopy with atomic resolution. Two commonly used ILs are examined in this study: 1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C3mpyr][NTf2]) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][NTf2]). On RbI(100) surfaces with near zero σ, we observe alternating cation and anion layers, diverging from the previously proposed monolayer model for IL/alkali halide(100) interfaces. These results support the argument that overscreening occurs under low σ, even approaching zero, and reconcile conflicting experimental conclusions about low σ systems. On RbI(111) surfaces with high σ, we identify solvation structures consisting of two consecutive counterion layers. This structure aligns with the theoretically predicted crowding; a phenomenon rarely observed in commonly used ILs due to typically unreachable σ in electrochemical IL/electrode systems. Our findings indicate that alkali halide(111) surfaces are potentially valuable for exploring the crowding phenomenon in ILs, addressing the current scarcity of experimental observations.

Reorganizing Helmholtz Adsorption Plane Enables Sodium Layered-Oxide Cathode beyond High Oxidation Limits

Sodium layered-oxides (NaxTMO2) sustain severe interfacial stability issues when subjected to battery applications. Particularly at high potential, the oxidation limits including transition metal dissolution and solid electrolyte interphase reformation are intertwined upon the cathode, resulting in poor cycle ability. Herein, by rearranging the complex and structure of the Helmholtz absorption plane adjacent to NaxTMO2 cathodes, the mechanism of constructing stable cathode/electrolyte interphase (CEI) to push up oxidation limits is clarified. The strong absorbent fluorinated anions replace the solvents into the inner Helmholtz plane, thereby reorganizing the Helmholtz absorption structure and spontaneously inducing anion-dominated interphase to envelop more active sites for layered oxides. More importantly, such multi-component CEI proves effective for the long-term durability of a series of manganese-based oxide cathodes, which achieves a 1500-cycles lifetime against high oxidation voltage limit beyond 4.3 V. This work unravels the key role of breaking high-oxidation limits in attaining higher energy density of layered-oxide systems.

Nanostructure and Dynamics of the Locally Concentrated Ionic Liquid 2:1 (wt:wt) HMIM FAP:TFTFE and HMIM FAP on Graphite and Gold Electrodes as a Function of Potential

Video-rate atomic force microscopy (AFM) is used to record the near-surface nanostructure and dynamics of one pure ionic liquid (IL), 1-hexyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate (HMIM FAP), and a locally-concentrated IL comprising HMIM FAP with the low viscosity diluent 1,1,2,2-tetrafluoroethyl 2,2,2-trifluoroethyl ether (TFTFE), on highly oriented pyrolytic graphite (HOPG) and Au(111) electrodes as a function of potential. Over the potential range measured (open-circuit potential ± 1 V), different near-surface nanostructures are observed. For pure HMIM FAP, globular aggregates align in rows on HOPG, whereas elongated and worm-like nanostructures form on Au(111). For 2:1 (wt:wt) HMIM FAP:TFTFE, larger and less defined diluent swollen IL aggregates are present on both electrodes. Long-lived near-surface nanostructures for HMIM FAP and the 2:1 (wt:wt) HMIM FAP:TFTFE persist on both electrodes. 2:1 (wt:wt) HMIM FAP:TFTFE mixture diffuses more rapidly than pure HMIM FAP on both electrodes with obviously higher diffusion coefficients on HOPG than on Au(111) due to weaker electrostatic and solvophobic interactions between near-surface aggregates and Stern layer ions. These outcomes provide valuable insights for a wide range of IL applications in interface sciences, including electrolytes, catalysts, lubricants, and sensors.

Designer Anions for Better Rechargeable Lithium Batteries and Beyond

Non-aqueous electrolytes, generally consisting of metal salts and solvating media, are indispensable elements for building rechargeable batteries. As the major sources of ionic charges, the intrinsic characters of salt anions are of particular importance in determining the fundamental properties of bulk electrolyte, as well as the features of the resulting electrode-electrolyte interphases/interfaces. To cope with the increasing demand for better rechargeable batteries requested by emerging application domains, the structural design and modifications of salt anions are highly desired. Here, salt anions for lithium and other monovalent (e.g., sodium and potassium) and multivalent (e.g., magnesium, calcium, zinc, and aluminum) rechargeable batteries are outlined. Fundamental considerations on the design of salt anions are provided, particularly involving specific requirements imposed by different cell chemistries. Historical evolution and possible synthetic methodologies for metal salts with representative salt anions are reviewed. Recent advances in tailoring the anionic structures for rechargeable batteries are scrutinized, and due attention is paid to the paradigm shift from liquid to solid electrolytes, from intercalation to conversion/alloying-type electrodes, from lithium to other kinds of rechargeable batteries. The remaining challenges and key research directions in the development of robust salt anions are also discussed.

Extended Battery Compatibility Consideration from an Electrolyte Perspective

The performance of electrochemical batteries is intricately tied to the physicochemical environments established by their employed electrolytes. Traditional battery designs utilizing a single electrolyte often impose identical anodic and cathodic redox conditions, limiting the ability to optimize redox environments for both anode and cathode materials. Consequently, advancements in electrolyte technologies are pivotal for addressing these challenges and fostering the development of next-generation high-performance electrochemical batteries. This review categorizes perspectives on electrolyte technology into three key areas: additives engineering, comprehensive component analysis encompassing solvents and solutes, and the effects of concentration. By summarizing significant studies, the efficacy of electrolyte engineering is highlighted, and the review advocates for further exploration of optimized component combinations. This review primarily focuses on liquid electrolyte technologies, briefly touching upon solid-state electrolytes due to the former greater vulnerability to electrode and electrolyte interfacial effects. The ultimate goal is to generate increased awareness within the battery community regarding the holistic improvement of battery components through optimized combinations.

Nanostructure and Dynamics of Aprotic Ionic Liquids at Graphite Electrodes as a Function of Potential

Atomic force microscope (AFM) videos reveal the near-surface nanostructure and dynamics of the ionic liquids (ILs) 1-butyl-3-methylimidazolium dicyanamide (BMIM DCA) and 1-hexyl-3-methylimidazolium dicyanamide (HMIM DCA) above highly oriented pyrolytic graphite (HOPG) electrodes as a function of surface potential. Molecular dynamics (MD) simulations reveal the molecular-level composition of the nanostructures. In combination, AFM and MD show that the near-surface aggregates form via solvophobic association of the cation alkyl chains at the electrode interface. The diffusion coefficients of interfacial nanostructures are ≈0.01 nm2 s-1 and vary with the cation alkyl chain length and the surface potential. For each IL, the nanostructure diffusion coefficients are similar at open-circuit potential (OCP) and OCP + 1V, but BMIM DCA moves about twice as fast as HMIM DCA. At negative potentials, the diffusion coefficient decreases for BMIM DCA and increases for HMIM DCA. When the surface potential is switched from negative to positive, a sudden change in the direction of the nanostructure motion is observed for both BMIM DCA and HMIM DCA. No transient dynamics are noted following other potential jumps. This study provides a new fundamental understanding regarding the dynamics of electrochemically stable ILs at electrodes vital for the rational development of IL-based electrochemical devices.

Nonflammable Succinonitrile-Based Deep Eutectic Electrolyte for Intrinsically Safe High-Voltage Sodium-Ion Batteries

Intrinsically safe sodium-ion batteries are considered as a promising candidate for large-scale energy storage systems. However, the high flammability of conventional electrolytes may pose serious safety threats and even explosions. Herein, a strategy of constructing a deep eutectic electrolyte is proposed to boost the safety and electrochemical performance of succinonitrile (SN)-based electrolyte. The strong hydrogen bond between S═O of 1,3,2-dioxathiolane-2,2-dioxide (DTD) and the α-H of SN endows the enhanced safety and compatibility of SN with Lewis bases. Meanwhile, the DTD participates in the inner Na+ sheath and weakens the coordination number of SN. The unique solvation configuration promotes the formation of robust gradient inorganic-rich electrode-electrolyte interphase, and merits stable cycling of half-cells in a wide temperature range, with a capacity retention of 82.8% after 800 cycles (25 °C) and 86.3% after 100 cycles (60 °C). Correspondingly, the full cells deliver tremendous improvement in cycling stability and rate performance.

Quantifying and Decoupling Molecular Interactions of Ionic Liquids with Gold Electrodes

This work combined gold colloid probe atomic force microscopy (AFM) with a quartz crystal microbalance (QCM) to accurately quantify the molecular interactions of fluorine-free phosphonium-based ionic liquids (ILs) with gold electrode surfaces. First, the interactions of ILs with the gold electrode per unit area (F A ' , N/m2) were obtained via the force-distance curves measured by gold probe AFM. Second, a QCM was employed to detect the IL amount to acquire the equilibrium number of IL molecules adsorbed onto the gold electrode per unit area (NIL, Num/m2). Finally, the quantified molecular interactions of ILs with the gold electrode (F0, nN/Num) were estimated. F0 is closely related to the IL composition, in which the IL with the same anion but a longer phosphonium cation exhibits a stronger molecular interaction. The changes in the quantified interactions of gold with different ILs are consistent with the interactions predicted by the extended Derjaguin-Landau-Verwey-Overbeek theory, and the van der Waals interaction was identified as the major contribution of the overall interaction. The quantified molecular interaction is expected to enable the direct experimental-derived interaction parameters for molecular simulations and provide the virtual design of novel ILs for energy storage applications.

A Critical Review on Room-Temperature Sodium-Sulfur Batteries: From Research Advances to Practical Perspectives

Room-temperature sodium-sulfur (RT-Na/S) batteries are promising alternatives for next-generation energy storage systems with high energy density and high power density. However, some notorious issues are hampering the practical application of RT-Na/S batteries. Besides, the working mechanism of RT-Na/S batteries under practical conditions such as high sulfur loading, lean electrolyte, and low capacity ratio between the negative and positive electrode (N/P ratio), is of essential importance for practical applications, yet the significance of these parameters has long been disregarded. Herein, it is comprehensively reviewed recent advances on Na metal anode, S cathode, electrolyte, and separator engineering for RT-Na/S batteries. The discrepancies between laboratory research and practical conditions are elaborately discussed, endeavors toward practical applications are highlighted, and suggestions for the practical values of the crucial parameters are rationally proposed. Furthermore, an empirical equation to estimate the actual energy density of RT-Na/S pouch cells under practical conditions is rationally proposed for the first time, making it possible to evaluate the gravimetric energy density of the cells under practical conditions. This review aims to reemphasize the vital importance of the crucial parameters for RT-Na/S batteries to bridge the gaps between laboratory research and practical applications.

Interfacial Spinel Local Interlocking Strategy Toward Structural Integrity in P3 Oxide Cathodes

P3-layered transition oxide cathodes have garnered considerable attention owing to their high initial capacity, rapid Na+ kinetics, and less energy consumption during the synthesis process. Despite these merits, their practical application is hindered by the substantial capacity degradation resulting from unfavorable structural transformations, Mn dissolution and migration. In this study, we systematically investigated the failure mechanisms of P3 cathodes, encompassing Mn dissolution, migration, and the irreversible P3-O3' phase transition, culminating in severe structural collapse. To address these challenges, we proposed an interfacial spinel local interlocking strategy utilizing P3/spinel intergrowth oxide as a proof-of-concept material. As a result, P3/spinel intergrowth oxide cathodes demonstrated enhanced cycling performance. The effectiveness of suppressing Mn migration and maintaining local structure of interfacial spinel local interlocking strategy was validated through depth-etching X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and in situ synchrotron-based X-ray diffraction. This interfacial spinel local interlocking engineering strategy presents a promising avenue for the development of advanced cathode materials for sodium-ion batteries.

The Influence of Cathode Degradation Products on the Anode Interface in Lithium-Ion Batteries

Degradation of cathode materials in lithium-ion batteries results in the presence of transition metal ions in the electrolyte, and these ions are known to play a major role in capacity fade and cell failure. Yet, while it is known that transition metal ions migrate from the metal oxide cathode and deposit on the graphite anode, their specific influence on anode reactions and structures, such as the solid electrolyte interphase (SEI), is still quite poorly understood due to the complexity in studying this interface in operational cells. In this work we combine operando electrochemical atomic force microscopy (EC-AFM), electrochemical quartz crystal microbalance (EQCM), and electrochemical impedance spectroscopy (EIS) measurements to probe the influence of a range of transition metal ions on the morphological, mechanical, chemical, and electrical properties of the SEI. By adding representative concentrations of Ni2+, Mn2+, and Co2+ ions into a commercially relevant battery electrolyte, the impacts of each on the formation and stability of the anode interface layer is revealed; all are shown to pose a threat to battery performance and stability. Mn2+, in particular, is shown to induce a thick, soft, and unstable SEI layer, which is known to cause severe degradation of batteries, while Co2+ and Ni2+ significantly impact interfacial conductivity. When transition metal ions are mixed, SEI degradation is amplified, suggesting a synergistic effect on the cell stability. Hence, by uncovering the roles these cathode degradation products play in operational batteries, we have provided a foundation upon which strategies to mitigate or eliminate these degradation products can be developed.

Building Stable Anodes for High-Rate Na-Metal Batteries

Due to low cost and high energy density, sodium metal batteries (SMBs) have attracted growing interest, with great potential to power future electric vehicles (EVs) and mobile electronics, which require rapid charge/discharge capability. However, the development of high-rate SMBs has been impeded by the sluggish Na+ ion kinetics, particularly at the sodium metal anode (SMA). The high-rate operation severely threatens the SMA stability, due to the unstable solid-electrolyte interface (SEI), the Na dendrite growth, and large volume changes during Na plating-stripping cycles, leading to rapid electrochemical performance degradations. This review surveys key challenges faced by high-rate SMAs, and highlights representative stabilization strategies, including the general modification of SMB components (including the host, Na metal surface, electrolyte, separator, and cathode), and emerging solutions with the development of solid-state SMBs and liquid metal anodes; the working principle, performance, and application of these strategies are elaborated, to reduce the Na nucleation energy barriers and promote Na+ ion transfer kinetics for stable high-rate Na metal anodes. This review will inspire further efforts to stabilize SMAs and other metal (e.g., Li, K, Mg, Zn) anodes, promoting high-rate applications of high-energy metal batteries towards a more sustainable society.

Integrative studies of ionic liquid interface layers: bridging experiments, theoretical models and simulations

Ionic liquids (ILs) are a class of salts existing in the liquid state below 100 °C, possessing low volatility, high thermal stability as well as many highly attractive solvent and electrochemical capabilities, etc., making them highly tunable for a great variety of applications, such as lubricants, electrolytes, and soft functional materials. In many applications, ILs are first either physi- or chemisorbed on a solid surface to successively create more functional materials. The functions of ILs at solid surfaces can differ considerably from those of bulk ILs, mainly due to distinct interfacial layers with tunable structures resulting in new ionic liquid interface layer properties and enhanced performance. Due to an almost infinite number of possible combinations among the cations and anions to form ILs, the diversity of various solid surfaces, as well as different external conditions and stimuli, a detailed molecular-level understanding of their structure-property relationship is of utmost significance for a judicious design of IL-solid interfaces with appropriate properties for task-specific applications. Many experimental techniques, such as atomic force microscopy, surface force apparatus, and so on, have been used for studying the ion structuring of the IL interface layer. Molecular Dynamics simulations have been widely used to investigate the microscopic behavior of the IL interface layer. To interpret and clarify the IL structure and dynamics as well as to predict their properties, it is always beneficial to combine both experiments and simulations as close as possible. In another theoretical model development to bridge the structure and properties of the IL interface layer with performance, thermodynamic prediction & property modeling has been demonstrated as an effective tool to add the properties and function of the studied nanomaterials. Herein, we present recent findings from applying the multiscale triangle "experiment-simulation-thermodynamic modeling" in the studies of ion structuring of ILs in the vicinity of solid surfaces, as well as how it qualitatively and quantitatively correlates to the overall ILs properties, performance, and function. We introduce the most common techniques behind "experiment-simulation-thermodynamic modeling" and how they are applied for studying the IL interface layer structuring, and we highlight the possibilities of the IL interface layer structuring in applications such as lubrication and energy storage.

Woven fabric-based separators with low tortuosity for sodium-ion batteries

In order to achieve high-performance and stable sodium-ion batteries, numerous attempts have been made to construct continuous ion transport pathways, in which a separator is one of the key components that affects the battery performance. In this study, a novel low-tortuosity woven fabric separator is fabricated by combining a weaving technique with a cellulose-solution method, followed by an infusion of a TEMPO-oxidized bacterial cellulose slurry into woven fabric substrates. The macropores in the fabric combine with the micropores in the oxidized bacterial cellulose to form a separator with a suitable pore structure and low tortuosity, forming a continuous sodium ion transport channel within the sodium-ion battery and effectively enhancing ion transport dynamics. The results show that, compared with a commercial polypropylene separator, the TEMPO-oxidized bacterial cellulose-woven fabric separator has a special weaving structure and lower tortuosity (0.77), as well as significant advantages in tensile strength (3.07 MPa), ionic conductivity (1.15 mS c), ionic transfer number (0.75), thermal stability, and electrochemical stability. This novel and simple preparation method provides new possibilities for achieving high-performance separators of sodium-ion batteries through rational structural design by textile technology.

Ion transport mechanisms in pectin-containing EC-LiTFSI electrolytes

Using all-atom molecular dynamics simulations, we report the structure and ion transport characteristics of a new class of solid polymer electrolytes that contain the biodegradable and mechanically stable biopolymer pectin. We used highly conducting ethylene carbonate (EC) as a solvent for simulating lithium-trifluoromethanesulfonimide (LiTFSI) salt containing different weight percentages of pectin. Our simulations reveal that the pectin chains reduce the coordination number of lithium ions around their counterions (and vice versa) because of stronger lithium-pectin interactions compared to lithium-TFSI interactions. Furthermore, the pectin is found to promote smaller ionic aggregates over larger ones, in contrast to the results typically reported for liquid and polymer electrolytes. We observed that the loading of pectin in EC-LiTFSI electrolytes increases their viscosity (η) and relaxation timescales (τc), indicating higher mechanical stability, and, consequently, a decrease of the mean squared displacement, diffusion coefficient (D), and Nernst-Einstein conductivity (σNE). Interestingly, while the lithium diffusivities are related to the ion-pair relaxation timescales as D+ ∼ τc-3.1, the TFSI- diffusivities exhibit excellent correlations with ion-pair relaxation timescales as D- ∼ τc-0.95. On the other hand, the NE conductivities are dictated by distinct transport mechanisms and scales with ion-pair relaxation timescales as σNE ∼ τc-1.85.

Effect of Potential on the Nanostructure Dynamics of Ethylammonium Nitrate at a Graphite Electrode

Video-rate atomic force microscopy (AFM) is used to study the near-surface nanostructure dynamics of the ionic liquid ethylammonium nitrate (EAN) at a highly oriented pyrolytic graphite (HOPG) electrode as a function of potential in real-time for the first time. The effects of varying the surface potential and adding 10 wt% water on the nanostructure diffusion coefficient are probed. For both EAN and the 90 wt% EAN-water mixture, disk-like features ≈9 nm in diameter and 1 nm in height form above the Stern layer at all potentials. The nanostructure diffusion coefficient increases with potential (from OCP -0.5 V to OCP +0.5 V) and with added water. Nanostructure dynamics depends on both the magnitude and direction of the potential change. Upon switching the potential from OCP -0.5 V to OCP +0.5 V, a substantial increase in the diffusion coefficients is observed, likely due to the absence of solvophobic interactions between the nitrate (NO3 - ) anions and the ethylammonium (EA+ ) cations in the near-surface region. When the potential is reversed, EA+ is attracted to the Stern layer to replace NO3 - , but its movement is hindered by solvophobic attractions. The outcomes will aid applications, including electrochemical devices, catalysts, and lubricants.

Enabling Further Organic Electrolyte Infiltration of Cellulose-Based Separators via Defect-Rich Polypyrrole Modification for High Sodium Ion Transport in Sodium Metal Batteries

Sodium metal batteries (SMBs) have high-density and cost-effective characteristics as one of the energy storage systems, but uncontrollable dendrite growth and poor rate performance still hinder their practical applications. Herein, a nitrogen-rich modified cellulose separator with released abundant ion transport tunnels in organic electrolyte was synthesized by in situ polymerization of polypyrrole, which is based on the high permeability of cellulose in aqueous solution and the interfacial interaction between cellulose and polypyrrole. Meanwhile, the introduction of abundant structural defects such as branch chains, oxygen-containing functional groups, and imine-like structure to disrupt polypyrrole conjugation enables the utilization of conductive polymers in composite separator applications. With the electrolyte affinity surface on, the modified separator exhibits reinforced electrolyte uptake (254%) and extended electrolyte wettability, thereby leading to accelerated ionic conductivity (2.77 mS cm-1) and homogeneous sodium deposition by facilitating the establishment of additional pathways for ion transport. Benefiting from nitrogen-rich groups, the polypyrrole-modified separator demonstrates selective Na+ transport by the data of improved Na+ transference number (0.62). Owing to the above advantages, the battery assembled with the modified separators exhibits outstanding rate performance and prominent capacity retention two times that of the pristine cellulose separator at a high current density under the condition of fluorine-free electrolyte.

Bio-based ether solvent and ionic liquid electrolyte for sustainable sodium-air batteries

Sodium-air batteries (SABs) are receiving considerable attention for the development of next generation battery alternatives due to their high theoretical energy density (up to 1105 W h kg-1). However, most of the studies on this technology are still based on organic solvents; in particular, diglyme, which is highly flammable and toxic for the unborn child. To overcome these safety issues, this research investigates the first use of a branched ether solvent 1,2,3-trimethoxypropane (TMP) as an alternative electrolyte to diglyme for SABs. Through this work, the reactivity of the central tertiary carbon in TMP towards bare sodium metal was identified, while the addition of N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpyr][TFSI]) as a co-solvent proved to be an effective strategy to limit the reactivity. Moreover, a Na-β-alumina disk was employed for anode protection, to separate the TMP-based electrolyte from the sodium metal. The new cell design resulted in improved cell performance: discharge capacities of up to 1.92 and 2.31 mA h cm-2 were achieved for the 16.6 mol% NaTFSI in TMP and 16.6 mol% NaTFSI in TMP/[C4mpyr][TFSI] compositions, respectively. By means of SEM, Raman and 23Na NMR techniques, NaO2 cubes were identified to be the major discharge product for both electrolyte compositions. Moreover, the hybrid electrolyte was shown to hinder the formation of side-products during discharge - the ratio of NaO2 to side-products in the hybrid electrolyte was 2.4 compared with 0.8 for the TMP-based electrolyte - and a different charge mechanism for the dissolution of NaO2 cubes for each electrolyte was observed. The findings of this work demonstrate the high potential of TMP as a base solvent for SABs, and the importance of careful electrolyte composition design in order to step towards greener and less toxic batteries.

Advances in Electrochemical Energy Storage over Metallic Bismuth-Based Materials

Bismuth (Bi) has been prompted many investigations into the development of next-generation energy storage systems on account of its unique physicochemical properties. Although there are still some challenges, the application of metallic Bi-based materials in the field of energy storage still has good prospects. Herein, we systematically review the application and development of metallic Bi-based anode in lithium ion batteries and beyond-lithium ion batteries. The reaction mechanism, modification methodologies and their relationship with electrochemical performance are discussed in detail. Additionally, owing to the unique physicochemical properties of Bi and Bi-based alloys, some innovative investigations of metallic Bi-based materials in alkali metal anode modification and sulfur cathodes are systematically summarized for the first time. Following the obtained insights, the main unsolved challenges and research directions are pointed out on the research trend and potential applications of the Bi-based materials in various energy storage fields in the future.

A Brief Overview of Silicon Nanoparticles as Anode Material: A Transition from Lithium-Ion to Sodium-Ion Batteries

The successful utilization of silicon nanoparticles (Si-NPs) to enhance the performance of Li-ion batteries (LIBs) has demonstrated their potential as high-capacity anode materials for next-generation LIBs. Additionally, the availability and relatively low cost of sodium resources have a significant influence on developing Na-ion batteries (SIBs). Despite the unique properties of Si-NPs as SIBs anode material, limited study has been conducted on their application in these batteries. However, the knowledge gained from using Si-NPs in LIBs can be applied to develop Si-based anodes in SIBs by employing similar strategies to overcome their drawbacks. In this review, a brief history of Si-NPs' usage in LIBs is provided and discuss the strategies employed to overcome the challenges, aiming to inspire and offer valuable insights to guide future research endeavors.

Ultrahigh-Rate Na/Cl2 Batteries Through Improved Electron and Ion Transport by Heteroatom-Doped Bicontinuous-Structured Carbon

Rechargeable sodium/chlorine (Na/Cl2 ) batteries are emerging candidates for sustainable energy storage owing to their superior energy densities and the high abundance of Na and Cl elements. However, their practical applications have been plagued by the poor rate performance (e.g., a maximum discharge current density of 150 mA g-1 ), as the widely used carbon nanosphere cathodes show both sluggish electron-ion transport and reaction kinetics. Here, by mimicking the sufficient mass and energy transport in a sponge, we report a bicontinuous-structured carbon cubosome with heteroatomic doping, which allows efficient Na+ and electron transport and promotes Cl2 adsorption and conversion, thus unlocking ultrahigh-rate Na/Cl2 batteries, e.g., a maximum discharge current density of 16,000 mA g-1 that is more than two orders of magnitude higher than previous reports. The optimized solid-liquid-gas (carbon-electrolyte-Cl2 ) triple interfaces further contribute to a maximum reversible capacity and cycle life of 2,000 mAh g-1 and 250 cycles, respectively. This study establishes a universal approach for improving the sluggish kinetics of conversion-type battery reactions, and provides a new paradigm to resolve the long-standing dilemma between high energy and power densities in energy storage devices.

Nanostructure of Locally Concentrated Ionic Liquids in the Bulk and at Graphite and Gold Electrodes

The physical properties of ionic liquids (ILs) have led to intense research interest, but for many applications, high viscosity is problematic. Mixing the IL with a diluent that lowers viscosity offers a solution if the favorable IL physical properties are not compromised. Here we show that mixing an IL or IL electrolyte (ILE, an IL with dissolved metal ions) with a nonsolvating fluorous diluent produces a low viscosity mixture in which the local ion arrangements, and therefore key physical properties, are retained or enhanced. The locally concentrated ionic liquids (LCILs) examined are 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (HMIM TFSI), 1-hexyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate (HMIM FAP), or 1-butyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate (BMIM FAP) mixed with 1,1,2,2-tetrafluoroethyl 2,2,2-trifluoroethyl ether (TFTFE) at 2:1, 1:1, and 1:2 (w/w) IL:TFTFE, as well as the locally concentrated ILEs (LCILEs) formed from 2:1 (w/w) HMIM TFSI-TFTFE with 0.25, 0.5, and 0.75 m lithium bis(trifluoromethylsulfonyl)imide (LiTFSI). Rheology and conductivity measurements reveal that the added TFTFE significantly reduces viscosity and increases ionic conductivity, and cyclic voltammetry (CV) reveals minimal reductions in electrochemical windows on gold and carbon electrodes. This is explained by the small- and wide-angle X-ray scattering (S/WAXS) and atomic force microscopy (AFM) data, which show that the local ion nanostructures are largely retained in LCILs and LCILEs in bulk and at gold and graphite electrodes for all potentials investigated.

Suppression of Interphase Dissolution Via Solvent Molecule Tuning for Sodium Metal Batteries

Solvent molecule tuning is used to alter the redox potentials of solvents or ion-solvent binding energy for high-voltage or low-temperature electrolytes. Herein, an electrolyte design strategy that effectively suppresses solid electrolyte interphase (SEI) dissolution and passivates highly-reactive metallic Na anode via solvent molecule tuning is proposed. With rationally lengthened phosphate backbones with ─CH2 ─ units, the low-solvation tris(2-ethylhexyl) phosphate (TOP) molecule effectively weakens the solvation ability of carbonate-based electrolytes, reduces the free solvent ratio, and enables an anion-enriched primary Na+ ion solvation sheath. The decreased free solvent and compact lower-solubility interphase established in this electrolyte prevent electrodes from continuous SEI dissolution and parasitic reactions at both room temperature (RT) and high temperature (HT). As a result, the Na/Na3 V2 (PO4 )3 cell with the new electrolyte achieves impressive cycling stability of 95.7% capacity retention after 1800 cycles at 25 °C and 62.1% capacity retention after 700 cycles at 60 °C. Moreover, the TOP molecule not only maintains the nonflammable feature of phosphate but also attains higher thermal stability, which endows the electrolyte with high safety and thermal stability. This design concept for electrolytes offers a promising path to long-cycling and high-safety sodium metal batteries.

In situ polymerized ionic liquids in polyester fiber composite membranes for detection of trace oil

In situ trace detection on ultra-clean surfaces is an important technology. The polyester fiber (PF) was introduced to serve as the template, to which the ionic liquids were bonded by hydrogen bonding. Polymerized ionic liquids (PIL) in PF were formed by in situ polymerization with the azodiisobutyronitrile (AIBN) and IL. The trace oil on metal surfaces was enriched by the composite membrane based on similar compatibility principle. The absolute recovery of the trace oil ranged from 91%-99% using this composite membrane. In the extraction samples, desirable linear correlations were obtained for trace oil in the range of 1.25-20 mg/mL. It has been proven that a 1 cm² PIL-PF composite membrane can effectively extract as little as 1 mg of lubricating oil on an ultra-clean metal surface of 0.1 m² with the LOD of 0.9 mg/mL, making it a promising material for in situ detection of trace oil on metal surfaces.

Effect of Electrode Surface Chemistry on Ion Structuring of Imidazolium Ionic Liquids

Surface chemistry plays a critical role in the ion structuring of ionic liquids (ILs) at the interfaces of electrodes and controls the overall energy storage performance of the system. Herein, we functionalized the gold (Au) colloid probe of an atomic force microscope with -COOH and -NH₂ groups to explore the effect of different surface chemical properties on the ion structuring of an IL. Aided by colloid-probe atomic force microscopy (AFM), the ion structuring of an imidazolium IL, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆], abbreviated as BP hereafter), on the Au electrode surface and the ion response to the change in the surface chemistry are investigated. AFM morphologies, contact angles, and approaching force-distance curves of the BP IL on the functionalized Au surfaces exhibited that the IL forms a more obvious layering structure on the -COOH-terminated Au surface (Au-COOH), while it forms heterogeneous and aggregating droplets on the -NH₂ surface (Au-NH₂). The formed uniform and aggregation-free ion layers in the vicinity of the Au-COOH surface are due to the π-π⁺ stacking interaction between the delocalized π⁺ electrons from the imidazolium ring in the IL [BMIM]⁺ cation and the localized π electrons from the sp² carbon on the -COOH group. The in situ observation of nano-friction and torsional resonance frequency at the IL-electrode interfaces further demonstrated the ion structuring of the IL at Au-COOH, which results in a more sensitive electrochemical response associated with a faster capacitive process.

Machine learning-guided discovery of ionic polymer electrolytes for lithium metal batteries

As essential components of ionic polymer electrolytes (IPEs), ionic liquids (ILs) with high ionic conductivity and wide electrochemical window are promising candidates to enable safe and high-energy-density lithium metal batteries (LMBs). Here, we describe a machine learning workflow embedded with quantum calculation and graph convolutional neural network to discover potential ILs for IPEs. By selecting subsets of the recommended ILs, combining with a rigid-rod polyelectrolyte and a lithium salt, we develop a series of thin (~50 μm) and robust (>200 MPa) IPE membranes. The Li|IPEs|Li cells exhibit ultrahigh critical-current-density (6 mA cm^-2) at 80 °C. The Li|IPEs|LiFePO₄ (10.3 mg cm^-2) cells deliver outstanding capacity retention in 350 cycles (>96% at 0.5C; >80% at 2C), fast charge/discharge capability (146 mAh g^-1 at 3C) and excellent efficiency (>99.92%). This performance is rarely reported by other single-layer polymer electrolytes without any flammable organics for LMBs.

Achieving Rapid Ultralow-Temperature Ion Transfer via Constructing Lithium-Anion Nanometric Aggregates to Eliminate Li+-Dipole Interactions

Sluggish desolvation in extremely cold environments caused by strong Li⁺-dipole interactions is a key inducement for the capacity decline of a battery. Although the Li⁺-dipole interaction is reduced by increasing the electrolyte concentration, its high viscosity inevitably limits ion transfer at low temperatures. Herein, Li⁺-dipole interactions were eliminated to accelerate the migration rate of ions in electrolytes and at the electrode interface via designing Li⁺-anion nanometric aggregates (LA-nAGGs) in low-concentration electrolytes. Li⁺ coordinated by TFSI^- and FSI^- anions instead of a donor solvent promotes the formation of an inorganic-rich interfacial layer and facilitates Li⁺ transfer. Consequently, the LA-nAGG-type electrolyte demonstrated a high ionic conductivity (0.6 mS cm^-1) at -70 °C and a low activation energy of charge transfer (38.24 kJ mol^-1), enabling Li||NiFe-Prussian blue derivative cells to deliver ∼83.1% of their room-temperature capacity at -60 °C. This work provides an advanced strategy for the development of low-temperature electrolytes.

Defect engineering of two-dimensional materials for advanced energy conversion and storage

In the global trend towards carbon neutrality, sustainable energy conversion and storage technologies are of vital significance to tackle the energy crisis and climate change. However, traditional electrode materials gradually reach their property limits. Two-dimensional (2D) materials featuring large aspect ratios and tunable surface properties exhibit tremendous potential for improving the performance of energy conversion and storage devices. To rationally control the physical and chemical properties for specific applications, defect engineering of 2D materials has been investigated extensively, and is becoming a versatile strategy to promote the electrode reaction kinetics. Simultaneously, exploring the in-depth mechanisms underlying defect action in electrode reactions is crucial to provide profound insight into structure tailoring and property optimization. In this review, we highlight the cutting-edge advances in defect engineering in 2D materials as well as their considerable effects in energy-related applications. Moreover, the confronting challenges and promising directions are discussed for the development of advanced energy conversion and storage systems.

A dendrite-free and anticaustic Zn anode enabled by high current-induced reconstruction of the electrical double layer

Aqueous Zn-based batteries deliver thousands of cycles at high rates but poor recyclability at low rates. Herein, we reveal that this illogical phenomenon is attributed to the reconstructed electrode/electrolyte interface at high rates, wherein the condensed electrical double layer (EDL) and the tightly absorbed Zn²⁺ ions on the Zn electrode surface afford compact and corrosion-resistant Zn deposits.

Spatially resolved structural order in low-temperature liquid electrolyte

Determining the degree and the spatial extent of structural order in liquids is a grand challenge. Here, we are able to resolve the structural order in a model organic electrolyte of 1 M lithium hexafluorophosphate (LiPF₆) dissolved in 1:1 (v/v) ethylene carbonate:diethylcarbonate by developing an integrated method of liquid-phase transmission electron microscopy (TEM), cryo-TEM operated at -30°C, four-dimensional scanning TEM, and data analysis based on deep learning. This study reveals the presence of short-range order (SRO) in the high-salt concentration domains of the liquid electrolyte from liquid phase separation at the low temperature. Molecular dynamics simulations suggest the SRO originates from the Li⁺-(PF₆^-)_n (n > 2) local structural order induced by high LiPF₆ salt concentration.

Real-Space Charge Density Profiling of Electrode-Electrolyte Interfaces with Angstrom Depth Resolution

The accumulation and depletion of charges at electrode-electrolyte interfaces is crucial for all types of electrochemical processes. However, the spatial profile of such interfacial charges remains largely elusive. Here we develop charge profiling three-dimensional (3D) atomic force microscopy (CP-3D-AFM) to experimentally quantify the real-space charge distribution of the electrode surface and electric double layers (EDLs) with angstrom depth resolution. We first measure the 3D force maps at different electrode potentials using our recently developed electrochemical 3D-AFM. Through statistical analysis, peak deconvolution, and electrostatic calculations, we derive the depth profile of the local charge density. We perform such charge profiling for two types of emergent electrolytes, ionic liquids, and highly concentrated aqueous solutions, observe pronounced sub-nanometer charge variations, and find the integrated charge densities to agree with those derived from macroscopic electrochemical measurements.

Task-Specific Phosphonium Iongels by Fast UV-Photopolymerization for Solid-State Sodium Metal Batteries

Sodium metal batteries are an emerging technology that shows promise in terms of materials availability with respect to lithium batteries. Solid electrolytes are needed to tackle the safety issues related to sodium metal. In this work, a simple method to prepare a mechanically robust and efficient soft solid electrolyte for sodium batteries is demonstrated. A task-specific iongel electrolyte was prepared by combining in a simple process the excellent performance of sodium metal electrodes of an ionic liquid electrolyte and the mechanical properties of polymers. The iongel was synthesized by fast (<1 min) UV photopolymerization of poly(ethylene glycol) diacrylate (PEGDA) in the presence of a saturated 42%mol solution of sodium bis(fluorosulfonyl)imide (NaFSI) in trimethyl iso-butyl phosphonium bis(fluorosulfonyl)imide (P111i4FSI). The resulting soft solid electrolytes showed high ionic conductivity at room temperature (≥10−3 S cm−1) and tunable storage modulus (104−107 Pa). Iongel with the best ionic conductivity and good mechanical properties (Iongel10) showed excellent battery performance: Na/iongel/NaFePO4 full cells delivered a high specific capacity of 140 mAh g−1 at 0.1 C and 120 mAh g−1 at 1 C with good capacity retention after 30 cycles.

Microstructural probing of phosphonium-based ionic liquids on a gold electrode using colloid probe AFM

Atomic force microscopy (AFM) with a gold colloid probe modeled as the electrode surface is employed to directly capture the contact resonance frequency of two phosphonium-based ionic liquids (ILs) containing a common anion [BScB]^- and differently lengthened cations ([P_6,6,6,14]⁺ and [P_4,4,4,8]⁺). The comparative interfacial studies are performed by creating IL films on the surface of gold, followed by measuring the wettability, thickness of the films, adhesion forces, surface morphology and AFM-probed contact resonance frequency. In addition, the cyclic voltammetry and impedance spectroscopy measurements of the neat ILs are measured on the surface of the gold electrode. The IL with longer cation alkyl chains exhibits a well-defined thin film on the electrode surface and enhanced the capacitance than the shorter chain IL. The AFM contact resonance frequency and force curves reveal that the longer IL prefers to form stiffer ion layers at the gold electrode surface, suggesting the "…anion-anion-cation-cation…" bilayer structure, in contrast, the shorter-chain IL forms the softer cation-anion alternating structure, i.e., "…anion-cation-anion-cation…".

Tailoring Electrolyte Solvation for LiF-Rich Solid Electrolyte Interphase toward a Stable Li Anode

A solid electrolyte interphase (SEI) with robust mechanical property and high ionic conductivity is imperative for high-performance lithium metal batteries since it can efficiently impede the growth of notorious lithium dendrites. However, it is difficult to form such a SEI directly from an electrolyte. In this work, a crowding dilutant modified ionic liquid electrolyte (M-ILE) has been developed for this purpose. Simulations and experiments indicate that the 1,2-difluorobenzene (1,2-dfBen) dilutant not only creates a crowded electrolyte environment to promote the interaction of Li⁺-FSI^-, leading to abundant aggregate ion pairs (AGGs), but also participates in the reduction to construct a robust and high ionic-conductive SEI. With this M-ILE, Li/LiFePO₄ cells achieve a capacity retention of 96% over 250 cycles with 9.5 mg cm^-2 mass loading, and Li/LiNi_0.5Co_0.2Mn_0.3O₂ cells also deliver a discharge capacity of 132 mAh g^-1 with a high retention of 88% after 100 cycles. Therefore, the use of a crowding diluent is considered to be an efficient way to construct an advanced SEI for a Li anode.

3D Sodiophilic Ti3C2 MXene@g-C3N4 Hetero-Interphase Raises the Stability of Sodium Metal Anodes

Owing to several advantages of metallic sodium (Na), such as a relatively high theoretical capacity, low redox potential, wide availability, and low cost, Na metal batteries are being extensively studied, which are expected to play a major role in the fields of electric vehicles and grid-scale energy storage. Although considerable efforts have been devoted to utilizing MXene-based materials for suppressing Na dendrites, achieving a stable cycling of Na metal anodes remains extremely challenging due to, for example, the low Coulombic efficiency (CE) caused by the severe side reactions. Herein, a g-C₃N₄ layer was attached in situ on the Ti₃C₂ MXene surface, inducing a surface state reconstruction and thus forming a stable hetero-interphase with excellent sodiophilicity between the MXene and g-C₃N₄ to inhibit side reactions and guide uniform Na ion flux. The 3D construction can not only lower the local current density to facilitate uniform Na plating/stripping but also mitigate volume change to stabilize the electrolyte/electrode interphase. Thus, the 3D Ti₃C₂ MXene@g-C₃N₄ nanocomposite enables much enhanced average CEs (99.9% at 1 mA h cm^-2, 0.5 mA cm^-2) in asymmetric half cells, long-term stability (up to 700 h) for symmetric cells, and stable cycling (up to 800 cycles at 2 C), together with outstanding rate capability (up to 20 C), of full cells. The present study demonstrates an approach in developing practically high performance for Na metal anodes.

Innermost Ion Association Configuration Is a Key Structural Descriptor of Ionic Liquids at Electrified Interfaces

The structure of electric double layers (EDLs) is crucial for all types of electrochemical processes. While in dilute solutions EDL structure can be approximately treated within the Gouy-Chapman-Stern regime, in highly ionic electrolytes the description of EDL has been largely elusive. Here we study the EDL structure of an ionic liquid on a series of crystalline electrodes. Through molecular dynamics (MD) simulations, we observe strong intermolecular interaction among cations and anions and propose that the cation-anion association structure at the innermost layer is a key descriptor of the EDL. Using our recently developed electrochemical 3D atomic force microscopy (EC-3D-AFM) technique, we confirm the theoretical prediction and further find that the width of the first EDL is an experimental gauge of the ion association structure in that layer. We expect such ion association descriptors to be broadly applicable to a large range of highly ionic electrolytes on various electrode surfaces.

Enabling High-Voltage "Superconcentrated Ionogel-in-Ceramic" Hybrid Electrolyte with Ultrahigh Ionic Conductivity and Single Li+ -Ion Transference Number

High room-temperature ionic conductivities, large Li⁺ -ion transference numbers, and good compatibility with both Li-metal anodes and high-voltage cathodes of the solid electrolytes are the essential requirements for practical solid-state lithium-metal batteries. Herein, a unique "superconcentrated ionogel-in-ceramic" (SIC) electrolyte prepared by an in situ thermally initiated radical polymerization is reported. Solid-state static ⁷ Li NMR and molecular dynamics simulation reveal the roles of ceramic in Li⁺ local environments and transport in the SIC electrolyte. The SIC electrolyte not only exhibits an ultrahigh ionic conductivity of 1.33 × 10^-3 S cm^-1 at 25 °C, but also a Li⁺ -ion transference number as high as 0.89, together with a low electronic conductivity of 3.14 × 10^-10 S cm^-1 and a wide electrochemical stability window of 5.5 V versus Li/Li⁺ . Applications of the SIC electrolyte in Li||LiNi_0.5 Co_0.2 Mn_0.3 O₂ and Li||LiFePO₄ batteries further demonstrate the high rate and long cycle life. This study, therefore, provides a promising hybrid electrolyte for safe and high-energy lithium-metal batteries.

Atomic force microscopy probing interactions and microstructures of ionic liquids at solid surfaces

Ionic liquids (ILs) are room temperature molten salts that possess preeminent physicochemical properties and have shown great potential in many applications. However, the use of ILs in surface-dependent processes, e.g. energy storage, is hindered by the lack of a systematic understanding of the IL interfacial microstructure. ILs on the solid surface display rich ordering, arising from coulombic, van der Waals, solvophobic interactions, etc., all giving near-surface ILs distinct microstructures. Therefore, it is highly important to clarify the interactions of ILs with solid surfaces at the nanoscale to understand the microstructure and mechanism, providing quantitative structure-property relationships. Atomic force microscopy (AFM) opens a surface-sensitive way to probe the interaction force of ILs with solid surfaces in the layers from sub-nanometers to micrometers. Herein, this review showcases the recent progress of AFM in probing interactions and microstructures of ILs at solid interfaces, and the influence of IL characteristics, surface properties and external stimuli is thereafter discussed. Finally, a summary and perspectives are established, in which, the necessities of the quantification of IL-solid interactions at the molecular level, the development of in situ techniques closely coupled with AFM for probing IL-solid interfaces, and the combination of experiments and simulations are argued.

Bridging Database and Experimental Analysis to Reveal Super-hydrodynamic Conductivity Scaling Regimes in Ionic Liquids

Ion transport through electrolytes critically impacts the performance of batteries and other devices. Many frameworks used to model ion transport assume hydrodynamic mechanisms and focus on maximizing conductivity by minimizing viscosity. However, solid-state electrolytes illustrate that non-hydrodynamic ion transport can define device performance. Increasingly, selective transport mechanisms, such as hopping, are proposed for concentrated electrolytes. However, viscosity-conductivity scaling relationships in ionic liquids are often analyzed with hydrodynamic models. We report data-centric analyses of hydrodynamic transport models of viscosity-conductivity scaling in ionic liquids by merging three databases to bridge physical properties and computational descriptors. With this expansive database, we constrained scaling analyses using ion sizes defined from simulated volumes, as opposed to estimating sizes from activity coefficients. Remarkably, we find that many ionic liquids exhibit positive deviations from the Nernst-Einstein model, implying ions move faster than hydrodynamics should allow. We verify these findings using microrheology and conductivity experiments. We further show that machine learning tools can improve predictions of conductivity from molecular properties, including predictions from solely computational features. Our findings reveal that many ionic liquids exhibit super-hydrodynamic viscosity-conductivity scaling, suggesting mechanisms of correlated ion motion, which could be harnessed to enhance electrochemical device performance.

Electroreduction of nitrogen at almost 100% current-to-ammonia efficiency

Beyond its use in the fertiliser and chemical industries¹, ammonia is currently seen as a potential replacement for carbon-based fuels and as a carrier for worldwide transportation of renewable energy². Implementation of this vision requires transformation of the existing fossil fuel based technology for NH₃ production³ to a simpler, scale-flexible technology, such as the electrochemical lithium-mediated nitrogen reduction reaction (Li-NRR)^3,4. This provides a genuine pathway from N₂ to ammonia, yet is hampered by limited yield rates and efficiencies^4-12. Here we investigate the role of the electrolyte in this reaction and present a high-efficiency, robust process enabled by compact ionic layering in the electrode-electrolyte interfacial region. The interface is generated by a high-concentration imide-based lithium salt electrolyte, enabling stabilised ammonia yield rates of 150±20 nmol s^-1 cm^-2 and current-to-ammonia efficiency closely approaching 100%. The ionic assembly formed at the electrode surface suppresses electrolyte decomposition and supports stable N₂ reduction. Our study highlights the interrelation between the performance of the Li-NRR and the physicochemical properties of the electrode-electrolyte interface. We anticipate that these findings will guide the development of a robust, high-performance process for sustainable ammonia production.

Metallic Sodium Anodes for Advanced Sodium Metal Batteries: Progress, Challenges and Perspective

Sodium (Na)-based batteries, as the ideal choice of large-scale and low-cost energy storage, have attracted much attention. Na metal anodes with high theoretical specific capacity and low potential are considered to be one of the most promising anodes for next-generation Na-based batteries. However, the high reactivity of Na metal anodes makes the electrode/electrolyte phase unstable, resulting in formation of Na dendrites, short cycle life and safety problems. Herein, the contribution outlines the latest development of Na metal anodes for Na metal batteries. The design strategies for high efficiency utilization of Na metal anodes are elucidated, including sophisticated electrode construction, liquid electrolyte optimization, electrode/electrolyte interface stabilization, and solid electrolyte adaptation. Finally, the future research direction and existing problems are proposed.

Flexible Sustained Ionogels with Ionic Hyperbranched Polymers for Enhanced Ion-Conduction and Energy Storage

Flexible and mechanically robust gel-like electrolytes offer enhanced energy storage capabilities, versatility, and safety in batteries and supercapacitors. However, the trade-off between ion conduction and mechanical robustness remains a challenge for these materials. Here, we suggest that the introduction of ionic hyperbranched polymers in structured sustained ionogels will lead to both enhanced ion conduction and mechanical performance because of the hyperbranched polymers' ionically conductive groups and the complementary interfacial interactions with ionic liquids. More specifically, we investigate the effect of hyperbranched polymers with carboxylate terminal groups and imidazolium counterions with various ionic group densities on the properties of ionogels composed of coassembled cellulose nanofibers (CNFs) and cellulose nanocrystals (CNCs) as sustainable open pore frame for ionic liquid immersion. The addition of hyperbranched polymers leads to the formation of highly interconnected openly porous, lightweight, and shape-persistent materials by harnessing hydrogen bonding between the polymers and the CNFs/CNCs "frame". Notably, these materials possess a 2-fold improvement in ionic conductivity combined with many-fold increase in Young's modulus, tensile strength, and toughness, making them comparable to common reinforced nanocomposite materials. Furthermore, the corresponding thin-film gel supercapacitors possess enhanced electrochemical cycling stability upon repeated bending with an 85% capacitance retention after 10 000 cycles, promising new insight in the development of simultaneously conductive and flexible gel electrolytes with sustained performance.

Molecular interactions of ionic liquids with SiO2 surfaces determined from colloid probe atomic force microscopy

Ionic liquids (ILs) interact strongly with many different types of solid surfaces in a wide range of applications, e.g. lubrication, energy storage and conversion, etc. However, due to the nearly immeasurable large number of potential ILs available, identifying the appropriate ILs for specific solid interfaces with desirable properties is a challenge. Theoretical studies are highly useful for effective development of design and applications of these complex molecular systems. However, obtaining reliable force field models and interaction parameters is highly demanding. In this work, we apply a new methodology by deriving the interaction parameters directly from the experimental data, determined by colloid probe atomic force microscopy (CP-AFM). The reliability of the derived interaction parameters is tested by performing molecular dynamics simulations to calculate translational self-diffusion coefficients and comparing them with those obtained from NMR diffusometry.

Applying Classical, Ab Initio, and Machine-Learning Molecular Dynamics Simulations to the Liquid Electrolyte for Rechargeable Batteries

Rechargeable batteries have become indispensable implements in our daily life and are considered a promising technology to construct sustainable energy systems in the future. The liquid electrolyte is one of the most important parts of a battery and is extremely critical in stabilizing the electrode-electrolyte interfaces and constructing safe and long-life-span batteries. Tremendous efforts have been devoted to developing new electrolyte solvents, salts, additives, and recipes, where molecular dynamics (MD) simulations play an increasingly important role in exploring electrolyte structures, physicochemical properties such as ionic conductivity, and interfacial reaction mechanisms. This review affords an overview of applying MD simulations in the study of liquid electrolytes for rechargeable batteries. First, the fundamentals and recent theoretical progress in three-class MD simulations are summarized, including classical, ab initio, and machine-learning MD simulations (section 2). Next, the application of MD simulations to the exploration of liquid electrolytes, including probing bulk and interfacial structures (section 3), deriving macroscopic properties such as ionic conductivity and dielectric constant of electrolytes (section 4), and revealing the electrode-electrolyte interfacial reaction mechanisms (section 5), are sequentially presented. Finally, a general conclusion and an insightful perspective on current challenges and future directions in applying MD simulations to liquid electrolytes are provided. Machine-learning technologies are highlighted to figure out these challenging issues facing MD simulations and electrolyte research and promote the rational design of advanced electrolytes for next-generation rechargeable batteries.

Theory-guided experimental design in battery materials research

A reliable energy storage ecosystem is imperative for a renewable energy future, and continued research is needed to develop promising rechargeable battery chemistries. To this end, better theoretical and experimental understanding of electrochemical mechanisms and structure-property relationships will allow us to accelerate the development of safer batteries with higher energy densities and longer lifetimes. This Review discusses the interplay between theory and experiment in battery materials research, enabling us to not only uncover hitherto unknown mechanisms but also rationally design more promising electrode and electrolyte materials. We examine specific case studies of theory-guided experimental design in lithium-ion, lithium-metal, sodium-metal, and all-solid-state batteries. We also offer insights into how this framework can be extended to multivalent batteries. To close the loop, we outline recent efforts in coupling machine learning with high-throughput computations and experiments. Last, recommendations for effective collaboration between theorists and experimentalists are provided.