Molecular weaving

Regulating the Topology of Covalent Organic Frameworks for Boosting Overall H2O2 Photogeneration

Photocatalytic oxygen reduction reactions and water oxidation reactions are extremely promising green approaches for massive H2O2 production. Nonetheless, constructing effective photocatalysts for H2O2 generation is critical and still challenging. Since the network topology has significant impacts on the electronic properties of two dimensional (2D) polymers, herein, for the first time, we regulated the H2O2 photosynthetic activity of 2D covalent organic frameworks (COFs) by topology. Through designing the linking sites of the monomers, we synthesized a pair of novel COFs with similar chemical components on the backbones but distinct topologies. Without sacrificial agents, TBD-COF with cpt topology exhibited superior H2O2 photoproduction performance (6085 and 5448 μmol g-1 h-1 in O2 and air) than TBC-COF with hcb topology through the O2-O2⋅--H2O2, O2-O2⋅--O2 1-H2O2, and H2O-H2O2 three paths. Further experimental and theoretical investigations confirmed that during the H2O2 photosynthetic process, the charge carrier separation efficiency, O2⋅- generation and conversion, and the energy barrier of the rate determination steps in the three channels, related to the formation of *OOH, *O2 1, and *OH, can be well tuned by the topology of COFs. The current study enlightens the fabrication of high-performance photocatalysts for H2O2 production by topological structure modulation.

Concentration-induced spontaneous polymerization of protic ionic liquids for efficient in situ adhesion

The advancement of contemporary adhesives is often limited by the balancing act between cohesion and interfacial adhesion strength. This study explores an approach to overcome this trade-off by utilizing the spontaneous polymerization of a protic ionic liquid-based monomer obtained through the neutralization of 2-acrylamide-2-methyl propane sulfonic acid and hydroxylamine. The initiator-free polymerization process is carried out through a gradual increase in monomer concentration in aqueous solutions caused by solvent evaporation upon heating, which results in the in-situ formation of a tough and thin adhesive layer with a highly entangled polymeric network and an intimate interface contact between the adhesive and substrate. The abundance of internal and external non-covalent interactions also contributes to both cohesion and interfacial adhesion. Consequently, the produced protic poly(ionic liquid)s exhibit considerable adhesion strength on a variety of substrates. This method also allows for the creation of advanced adhesive composites with electrical conductivity or visualized sensing functionality by incorporating commercially available fillers into the ionic liquid adhesive. This study provides a strategy for creating high-performance ionic liquid-based adhesives and highlights the importance of in-situ polymerization for constructing adhesive composites.

Anion-Coordination Foldamer-Based Polymer Network: from Molecular Spring to Elastomer

Foldamer is a scaled-down version of coil spring, which can absorb and release energy by conformational change. Here, polymer networks with high density of molecular springs were developed by employing anion-coordination-based foldamers as the monomer. The coiling of the foldamer is controlled by oligo(urea) ligands coordinating to chloride ions; subsequently, the folding and unfolding of foldamer conformations endow the polymer network with excellent energy dissipation and toughness. The mechanical performance of the corresponding polymer networks shows a dramatic increase from P-L2UCl (non-folding), to P-L4UCl (a full turn), and then to P-L6UCl (1.5 turns), in terms of strength (2.62 MPa; 14.26 MPa; 22.93 MPa), elongation at break (70 %; 325 %; 352 %), Young's modulus (2.69 MPa; 63.61 MPa; 141.50 MPa), and toughness (1.12 MJ/m3; 21.39 MJ/m3; 49.62 MJ/m3), respectively, which is also better than those without anion centers and the non-foldamer based counterparts. Moreover, P-L6UCl shows enhanced strength and toughness than most of the molecular-spring based polymer networks. Thus, an effective strategy for designing high-performance anion-coordination-based materials is presented.

Assembly and Utility of a Drawstring-Mimetic Supramolecular Complex

Inspired by the drawstring structure in daily life, here we report the development of a drawstring-mimetic supramolecular complex at the molecular scale. This complex consists of a rigid figure-of-eight macrocyclic host molecule and a flexible linear guest molecule which could interact through three-point non-covalent binding to form a highly selective and efficient host-guest assembly. The complex not only resembles the drawstring structure, but also mimics the properties of a drawstring with regard to deformations under external forces. The supramolecular drawstring can be utilized as an interlocked crosslinker for poly(methyl acrylate), and the corresponding polymer samples exhibit comprehensive enhancement of macroscopic mechanical performance including stiffness, strength, and toughness.

Liquid-Metal Molecular Scissors

Molecules are the smallest units of matter that can exist independently, relatively stable, maintaining their physical and chemical activities. The key factors that dominate the structures and properties of molecules include atomic species, alignment commands, and chemical bonds. Herein, we reported a generalized effect in which liquid metals can directly cut off oxygen-containing groups in molecular matter at room temperature, allowing the remaining groups to recombine to form functional materials. Thus, we propose basic liquid-metal scissors for molecular directional clipping and functional transformations. As a proof of concept, we demonstrate the capabilities of liquid-metal scissors and reveal that the gallium on the surface of liquid metals directly extracts oxygen atoms from H2O or CH3OH molecules to form oxides. After clipping, the remaining hydrogen atoms from the H2O molecules recombine to form H2, while the remaining fragments of CH3OH produce H2, carbon materials, and carboxylates. This finding refreshes our basic understanding of chemistry and should lead to the development of straightforward molecular weaving techniques, which can help to overcome the limitations of molecular substances with single purposes. It also opens a universal route for realizing future innovations in molecular chemical engineering, life sciences, energy and environment research, and biomedicine.

Topology-Based Detection and Tracking of Deadlocks Reveal Aging of Active Ring Melts

Connecting the viscoelastic behavior of stressed ring melts to the various forms of entanglement that can emerge in such systems is still an open challenge. Here, we consider active ring melts, where stress is generated internally, and introduce a topology-based method to detect and track consequential forms of ring entanglements, namely, deadlocks. We demonstrate that, as stress accumulates, more and more rings are co-opted in a growing web of deadlocks that entrap many other rings by threading, bringing the system to a standstill. The method ought to help the study of topological aging in more general polymer contexts.

Folk arts-inspired twice-coagulated configuration-editable tough aerogels enabled by transformable gel precursors

Aerogels, as famous lightweight and porous nanomaterials, have attracted considerable attention in various emerging fields in recent decades, however, both low density and weak mechanical performance make their configuration-editing capability challenging. Inspired by folk arts, herein we establish a highly efficient twice-coagulated (TC) strategy to fabricate configuration-editable tough aerogels enabled by transformable gel precursors. As a proof of concept, aramid nanofibers (ANFs) and polyvinyl alcohol (PVA) are selected as the main components of aerogel, among which PVA forms a flexible configuration-editing gel network in the first coagulation process, and ANF forms a configuration-locking gel network in the second coagulation process. TC strategy guarantees the resulting aerogels with both high toughness and feasible configuration editing capability individually or simultaneously. Altogether, the resulting tough aerogels with special configuration through soft to hard modulation provide great opportunities to break through the performance limits of the aerogels and expand application areas of aerogels.

Topology-Selective Manipulation of Two-Dimensional Covalent Organic Frameworks

The manipulation of topological architectures in two-dimensional (2D) covalent organic framework (COF) materials for different applications is promising but remains a great challenge. Here, we first report the topology-selective synthesis of two distinct varieties of 2DCOFs, imine-based HT-COFs and benzimidazole-fused BI-HT-COFs, by simply altering acid catalysts. To HT-COFs, a superlattice of 1D channel with a persistent triangular shape is formed via Schiff base reaction, while to BI-HT-COFs, a hexagonal lattice structure with a highly conjugated structure and imidazole linkages is constructed due to an imine-based cyclization reaction. The two COFs exhibited marked differences in their bandgap, chemical stability, molecular adsorption, and catalytic activity, which make them have different fields of application. This work not only diversifies the hexaaminotriphenylene-based 2DCOF topologies but also provides vivid examples of structure-property relationships, which would facilitate fundamental research and potential applications of 2DCOFs.

Woven organic crystals

Woven architectures are prepared by physical entanglement of fibrous components to expand one-dimensional material into two-dimensional sheets with enhanced strength and resilience to wear. Here, we capitalize on the elastic properties of long organic crystals with a high aspect ratio to prepare an array of centimeter-size woven network structures. While being robust to mechanical impact, the woven patches are also elastic due to effective stress dissipation by the elasticity of the individual warp and weft crystals. The thermal stability of component crystals translates into favorable thermoelastic properties of the porous woven structures, where the network remains elastic over a range of 300 K. By providing means for physical entanglement of organic crystals, the weaving circumvents the natural limitation of the small size of slender organic crystals that is determined by their natural growth, thereby expanding the prospects for applications of organic crystals from one-dimensional entities to expandable, two-dimensional robust structures.

Taming Multiscale Structural Complexity in Porous Skeletons: From Open Framework Materials to Micro/Nanoscaffold Architectures

Recent developments in the design and synthesis of more and more sophisticated organic building blocks with controlled structures and physical properties, combined with the emergence of novel assembly modes and nanofabrication methods, make it possible to tailor unprecedented structurally complex porous systems with precise multiscale control over their architectures and functions. By tuning their porosity from the nanoscale to microscale, a wide range of functional materials can be assembled, including open frameworks and micro/nanoscaffold architectures. During the last two decades, significant progress is made on the generation and optimization of advanced porous systems, resulting in high-performance multifunctional scaffold materials and novel device configurations. In this perspective, a critical analysis is provided of the most effective methods for imparting controlled physical and chemical properties to multifunctional porous skeletons. The future research directions that underscore the role of skeleton structures with varying physical dimensions, from molecular-level open frameworks (<10 nm) to supramolecular scaffolds (10-100 nm) and micro/nano scaffolds (>100 nm), are discussed. The limitations, challenges, and opportunities for potential applications of these multifunctional and multidimensional material systems are also evaluated in particular by addressing the greatest challenges that the society has to face.

Biomimetic Silk Architectures Outperform Animal Horns in Strength and Toughness

Structural biomimicry is an intelligent approach for developing lightweight, strong, and tough materials (LSTMs). Current fabrication technologies, such as 3D printing and two-photon lithography often face challenges in constructing complex interlaced structures, such as the sinusoidal crossed herringbone structure that contributes to the ultrahigh strength and fracture toughness of the dactyl club of peacock mantis shrimps. Herein, bioinspired LSTMs with laminated or herringbone structures is reported, by combining textile processing and silk fiber "welding" techniques. The resulting biomimetic silk LSTMs (BS-LSTMs) exhibit a remarkable combination of lightweight with a density of 0.6-0.9 g cm-3 , while also being 1.5 times stronger and 16 times more durable than animal horns. These findings demonstrate that BS-LSTMs are among the toughest natural materials made from silk proteins. Finite element simulations further reveal that the fortification and hardening of BS-LSTMs arise primarily from the hierarchical organization of silk fibers and mechanically transferable meso-interfaces. This study highlights the rational, cost-effective, controllable mesostructure, and transferable strategy of integrating textile processing and fiber "welding" techniques for the fabrication of BS-LSTMs with advantageous structural and mechanical properties. These findings have significant implications for a wide range of applications in biomedicine, mechanical engineering, intelligent textiles, aerospace industries, and beyond.

Nonaffine Mechanics of Entangled Networks Inspired by Intermediate Filaments

Inspired by massive intermediate filament (IF) reorganization in superstretched epithelia, we examine computationally the principles controlling the mechanics of a set of entangled filaments whose ends slide on the cell boundary. We identify an entanglement metric and threshold beyond which random loose networks respond nonaffinely and nonlinearly to stretch by self-organizing into structurally optimal star-shaped configurations. A simple model connecting cellular and filament strains links emergent mechanics to cell geometry, network topology, and filament mechanics. We identify a safety net mechanism in IF networks and provide a framework to harness entanglement in soft fibrous materials.

Grasping through dynamic weaving with entangled closed loops

Pick-and-place is essential in diverse robotic applications for industries including manufacturing, and assembly. Soft grippers offer a cost-effective, and low-maintenance alternative for secure object grasping without complex sensing and control systems. However, their inherent softness normally limits payload capabilities and robustness to external disturbances, constraining their applications and hindering reliable performance. In this study, we propose a weaving-inspired grasping mechanism that substantially increases payload capacity while maintaining the use of soft and flexible materials. Drawing from weaving principles, we designed a flexible continuum structure featuring multiple closed-loop strips and employing a kirigami-inspired approach to enable the instantaneous and reversible creation of a woven configuration. The mechanical stability of the woven configuration offers exceptional loading capacity, while the softness of the gripper material ensures safe and adaptive interactions with objects. Experimental results show that the 130 g·f gripper can support up to 100 kg·f. Outperforming competitors in similar weight and softness domains, this breakthrough, enabled by the weaving principle, will broaden the scope of gripper applications to previously inaccessible or barely accessible fields, such as agriculture and logistics.

Synergistic Covalent-and-Supramolecular Polymers with an Interwoven Topology

Network topologies, especially some high-order topologies, are able to furnish cross-linked polymer materials with enhanced properties without altering their chemical composition. However, the fabrication of such topologically intriguing architectures at the macromolecular level and in-depth insights into their structure-property relationship remain a significant challenge. Herein, we relied on synergistic covalent-and-supramolecular polymers (CSPs) as a platform to prepare a range of polymer networks with an interwoven topology. Specifically, through the sequential supramolecular self-assemblies, the covalent polymers (CPs) and metallosupramolecular polymers (MSPs) could be interwoven in our CSPs by [2]pseudorotaxane cross-links. As a result, the obtained CSPs possessed a topological network that could not only promote the synergistic effect between CPs and MSPs to afford mechanically robust yet dynamic materials but also vest polymers with some functions, as manifested by force-induced hierarchical dissociations of supramolecular interactions and superior thermomechanical stability compared to our previously reported CSP systems. Furthermore, our CSPs exhibited tunable mechanical performance toward multiple stimuli including K⁺ and PPh₃, demonstrating abundant stimuli-responsive properties. We hope that these findings could provide novel opportunities toward achieving topological structures at the macromolecular level and also motivate further explorations of polymeric materials via the way of controlling their topological structures.

Woven Polymer Networks: From Crystalline to Elastomeric Materials

Weaving technology has been extensively used for manufacturing macroscopic fabrics and satisfying the artistic demands of humans through the ages. Integrating woven geometries into molecular structures is a persistent pursuit, and yet a significant challenge to chemists, owing to the lack of effective methodologies to guide the regular mutual interlacing of molecular strands. In this Concept article, recent progress and related strategies in constructing woven polymer networks (WPNs) are summarized and discussed. An outlook is then given to highlight the future opportunities and challenges in the development of both molecularly woven structures and molecularly woven functional materials.

Shape-Dependent Complementary Ditopic Terpyridine Pair with Two Levels of Self-Recognition for Coordination-Driven Self-Assembly

Molecular recognition in biological systems plays a vital role in the precise construction of biomacromolecules and the corresponding biological activities. Such recognition mainly relies on the highly specific binding of complementary molecular pairs with complementary sizes, shapes, and intermolecular forces. It still remains challenging to develop artificial complementary motif pairs for coordination-driven self-assembly. Herein, a series of shape-dependent complementary motif pairs, based on ditopic 2,2':6',2″-terpyridine (TPY) backbone, are designed and synthesized. The fidelity degrees of self-assemblies from these motifs are carefully evaluated by multi-dimensional mass spectrometry, nuclear magnetic resonance spectroscopy, and molecular modeling. In addition, two levels of self-recognition in both homoleptic and heteroleptic assembly are discovered in the assembled system. Through finely tuning the shape and size of the ligands, a complementary pair is developed with error-free narcissistically self-sorting at two levels of self-recognition, and the intrinsic principle is carefully investigated.

Piecewise-linear embeddings of decussate extended θ graphs and tetrahedra

An nθ graph is an n-valent graph with two vertices. From symmetry considerations, it has vertex–edge transitivity 1 1. Here, they are considered extended with divalent vertices added to the edges to explore the simplest piecewise-linear tangled embeddings with straight, non-intersecting edges (sticks). The simplest tangles found are those with 3n sticks, transitivity 2 2, and with 2⌊(n − 1)/2⌋ ambient-anisotopic tangles. The simplest finite and 1-, 2- and 3-periodic decussate structures (links and tangles) are described. These include finite cubic and icosahedral and 1- and 3-periodic links, all with minimal transitivity. The paper also presents the simplest tangles of extended tetrahedra and their linkages to form periodic polycatenanes. A vertex- and edge-transitive embedding of a tangled srs net with tangled and polycatenated θ graphs and vertex-transitive tangled diamond (dia) nets are described.

Knotting matters: orderly molecular entanglements

Entangling strands in a well-ordered manner can produce useful effects, from shoelaces and fishing nets to brown paper packages tied up with strings. At the nanoscale, non-crystalline polymer chains of sufficient length and flexibility randomly form tangled mixtures containing open knots of different sizes, shapes and complexity. However, discrete molecular knots of precise topology can also be obtained by controlling the number, sequence and stereochemistry of strand crossings: orderly molecular entanglements. During the last decade, substantial progress in the nascent field of molecular nanotopology has been made, with general synthetic strategies and new knotting motifs introduced, along with insights into the properties and functions of ordered tangle sequences. Conformational restrictions imparted by knotting can induce allostery, strong and selective anion binding, catalytic activity, lead to effective chiral expression across length scales, binding modes in conformations efficacious for drug delivery, and facilitate mechanical function at the molecular level. As complex molecular topologies become increasingly synthetically accessible they have the potential to play a significant role in molecular and materials design strategies. We highlight particular examples of molecular knots to illustrate why these are a few of our favourite things.

Viscoelastic Covalent Organic Nanotube Fabric via Macroscopic Entanglement

Covalent organic nanotubes (CONTs) are one-dimensional porous frameworks constructed from organic building blocks via dynamic covalent chemistry. CONTs are synthesized as insoluble powder that restricts their potential applications. The judicious selection of 2,2'-bipyridine-5,5'-dicarbaldehyde and tetraaminotriptycene as building blocks for TAT-BPy CONTs has led to constructing flexible yet robust and self-standing fabric up to 3 μm thickness. The TAT-BPy CONTs and TAT-BPy CONT fabric have been characterized by solid-state one-dimensional (1D) ¹³C CP-MAS, two-dimensional (2D) ¹³C-¹H correlation NMR, 2D ¹H-¹H DQ-SQ NMR, and 2D ¹⁴N-¹H correlation NMR spectroscopy. The mechanism of fabric formation has been established by using high-resolution transmission electron microscopy and scanning electron microscopy techniques. The as-synthesized viscoelastic TAT-BPy CONT fabric exhibits high mechanical strength with a reduced modulus (E_r) of 8 (±3) GPa and hardness (H) of 0.6 (±0.3) GPa. Interestingly, the viscoelastic fabric shows time-dependent elastic depth recovery up to 50-70%.