1
|
Haegele S, Martínez-Cercós D, Arrés Chillón J, Paulillo B, Terborg RA, Pruneri V. Multispectral Holographic Intensity and Phase Imaging of Semitransparent Ultrathin Films. ACS PHOTONICS 2024; 11:1873-1886. [PMID: 38766501 PMCID: PMC11100288 DOI: 10.1021/acsphotonics.3c01834] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/13/2023] [Revised: 04/15/2024] [Accepted: 04/16/2024] [Indexed: 05/22/2024]
Abstract
In this paper, we demonstrate a novel optical characterization method for ultrathin semitransparent and absorbing materials through multispectral intensity and phase imaging. The method is based on a lateral-shearing interferometric microscopy (LIM) technique, where phase-shifting allows extraction of both the intensity and the phase of transmitted optical fields. To demonstrate the performance in characterizing semitransparent thin films, we fabricated and measured cupric oxide (CuO) seeded gold ultrathin metal films (UTMFs) with mass-equivalent thicknesses from 2 to 27 nm on fused silica substrates. The optical properties were modeled using multilayer thin film interference and a parametric model of their complex refractive indices. The UTMF samples were imaged in the spectral range from 475 to 750 nm using the proposed LIM technique, and the model parameters were fitted to the measured data in order to determine the respective complex refractive indices for varying thicknesses. Overall, by using the combined intensity and phase not only for imaging and quality control but also for determining the material properties, such as complex refractive indices, this technique demonstrates a high potential for the characterization of the optical properties, of (semi-) transparent thin films.
Collapse
Affiliation(s)
- Sebastian Haegele
- ICFO-Institut
de Ciències Fotòniques, The Barcelona Institute of Science
and Technology, Castelldefels, 08860 Barcelona, Spain
| | - Daniel Martínez-Cercós
- ICFO-Institut
de Ciències Fotòniques, The Barcelona Institute of Science
and Technology, Castelldefels, 08860 Barcelona, Spain
| | - Javier Arrés Chillón
- ICFO-Institut
de Ciències Fotòniques, The Barcelona Institute of Science
and Technology, Castelldefels, 08860 Barcelona, Spain
| | - Bruno Paulillo
- ICFO-Institut
de Ciències Fotòniques, The Barcelona Institute of Science
and Technology, Castelldefels, 08860 Barcelona, Spain
| | - Roland A. Terborg
- ICFO-Institut
de Ciències Fotòniques, The Barcelona Institute of Science
and Technology, Castelldefels, 08860 Barcelona, Spain
| | - Valerio Pruneri
- ICFO-Institut
de Ciències Fotòniques, The Barcelona Institute of Science
and Technology, Castelldefels, 08860 Barcelona, Spain
- ICREA-Institució
Catalana de Recerca i Estudis Avançats, 08010 Barcelona, Spain
| |
Collapse
|
2
|
Li C, Pan R, Gu C, Guo H, Li J. Reconfigurable Micro/Nano-Optical Devices Based on Phase Transitions: From Materials, Mechanisms to Applications. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2306344. [PMID: 38489745 PMCID: PMC11132080 DOI: 10.1002/advs.202306344] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/04/2023] [Revised: 01/10/2024] [Indexed: 03/17/2024]
Abstract
In recent years, numerous efforts have been devoted to exploring innovative micro/nano-optical devices (MNODs) with reconfigurable functionality, which is highly significant because of the progressively increasing requirements for next-generation photonic systems. Fortunately, phase change materials (PCMs) provide an extremely competitive pathway to achieve this goal. The phase transitions induce significant changes to materials in optical, electrical properties or shapes, triggering great research interests in applying PCMs to reconfigurable micro/nano-optical devices (RMNODs). More specifically, the PCMs-based RMNODs can interact with incident light in on-demand or adaptive manners and thus realize unique functions. In this review, RMNODs based on phase transitions are systematically summarized and comprehensively overviewed from materials, phase change mechanisms to applications. The reconfigurable optical devices consisting of three kinds of typical PCMs are emphatically introduced, including chalcogenides, transition metal oxides, and shape memory alloys, highlighting the reversible state switch and dramatic contrast of optical responses along with designated utilities generated by phase transition. Finally, a comprehensive summary of the whole content is given, discussing the challenge and outlooking the potential development of the PCMs-based RMNODs in the future.
Collapse
Affiliation(s)
- Chensheng Li
- Beijing National Laboratory for Condensed Matter PhysicsInstitute of PhysicsChinese Academy of SciencesBeijing100190China
- CAS Key Laboratory of Vacuum PhysicsSchool of Physical SciencesUniversity of Chinese Academy of SciencesBeijing100049China
| | - Ruhao Pan
- Beijing National Laboratory for Condensed Matter PhysicsInstitute of PhysicsChinese Academy of SciencesBeijing100190China
| | - Changzhi Gu
- Beijing National Laboratory for Condensed Matter PhysicsInstitute of PhysicsChinese Academy of SciencesBeijing100190China
- CAS Key Laboratory of Vacuum PhysicsSchool of Physical SciencesUniversity of Chinese Academy of SciencesBeijing100049China
| | - Haiming Guo
- Beijing National Laboratory for Condensed Matter PhysicsInstitute of PhysicsChinese Academy of SciencesBeijing100190China
- CAS Key Laboratory of Vacuum PhysicsSchool of Physical SciencesUniversity of Chinese Academy of SciencesBeijing100049China
| | - Junjie Li
- Beijing National Laboratory for Condensed Matter PhysicsInstitute of PhysicsChinese Academy of SciencesBeijing100190China
- CAS Key Laboratory of Vacuum PhysicsSchool of Physical SciencesUniversity of Chinese Academy of SciencesBeijing100049China
- Songshan Lake Materials LaboratoryDongguanGuangdong523808China
| |
Collapse
|
3
|
Jana S, Sreekanth KV, Abdelraouf OAM, Lin R, Liu H, Teng J, Singh R. Aperiodic Bragg Reflectors for Tunable High-Purity Structural Color Based on Phase Change Material. NANO LETTERS 2024; 24:3922-3929. [PMID: 38506481 DOI: 10.1021/acs.nanolett.4c00052] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/21/2024]
Abstract
Tunable thin-film coating-based reflective color displays have versatile applications including image sensors, camouflage devices, spatial light modulators, and intelligent windows. However, generating high-purity colors using such coatings have posed a challenge. Here, we reveal high-purity color generation using an ultralow-loss phase change material (Sb2S3)-based tunable aperiodic distributed Bragg reflector (A-DBR). By strategically adjusting the periodicity of the adjacent layers of A-DBRs, we realize a narrow photonic bandgap with high reflectivity to generate high-purity orange and yellow colors. In particular, we demonstrate an A-DBR with a large photonic bandgap tunability by changing the structural phase of Sb2S3 layers from amorphous to crystalline. Moreover, we experimentally tailor multistate tunable colors through external optical stimuli. Unlike conventional nano thin-film coatings, our proposed approach offers an irradiance-free, narrowband, and highly reflective color band, achieving exceptional color purity by effectively suppressing reflections in off-color bands.
Collapse
Affiliation(s)
- Sambhu Jana
- Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore637371
- Centre for Disruptive Photonic Technologies, The Photonic Institute, 50 Nanyang Avenue, Singapore 639798
| | - Kandammathe Valiyaveedu Sreekanth
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Omar A M Abdelraouf
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Ronghui Lin
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Hong Liu
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Jinghua Teng
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Ranjan Singh
- Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore637371
- Centre for Disruptive Photonic Technologies, The Photonic Institute, 50 Nanyang Avenue, Singapore 639798
| |
Collapse
|
4
|
Woo SY, Shao F, Arora A, Schneider R, Wu N, Mayne AJ, Ho CH, Och M, Mattevi C, Reserbat-Plantey A, Moreno Á, Sheinfux HH, Watanabe K, Taniguchi T, Michaelis de Vasconcellos S, Koppens FHL, Niu Z, Stéphan O, Kociak M, García de Abajo FJ, Bratschitsch R, Konečná A, Tizei LHG. Engineering 2D Material Exciton Line Shape with Graphene/ h-BN Encapsulation. NANO LETTERS 2024; 24:3678-3685. [PMID: 38471109 DOI: 10.1021/acs.nanolett.3c05063] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/14/2024]
Abstract
Control over the optical properties of atomically thin two-dimensional (2D) layers, including those of transition metal dichalcogenides (TMDs), is needed for future optoelectronic applications. Here, the near-field coupling between TMDs and graphene/graphite is used to engineer the exciton line shape and charge state. Fano-like asymmetric spectral features are produced in WS2, MoSe2, and WSe2 van der Waals heterostructures combined with graphene, graphite, or jointly with hexagonal boron nitride (h-BN) as supporting or encapsulating layers. Furthermore, trion emission is suppressed in h-BN encapsulated WSe2/graphene with a neutral exciton red shift (44 meV) and binding energy reduction (30 meV). The response of these systems to electron beam and light probes is well-described in terms of 2D optical conductivities of the involved materials. Beyond fundamental insights into the interaction of TMD excitons with structured environments, this study opens an unexplored avenue toward shaping the spectral profile of narrow optical modes for application in nanophotonic devices.
Collapse
Affiliation(s)
- Steffi Y Woo
- Université Paris-Saclay, CNRS, Laboratoire de Physique des Solides, 91405 Orsay, France
| | - Fuhui Shao
- Université Paris-Saclay, CNRS, Laboratoire de Physique des Solides, 91405 Orsay, France
- State Key Laboratory for Superlattices and Microstructures, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China
- College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing 100083, China
| | - Ashish Arora
- Institute of Physics and Center for Nanotechnology, University of Münster, 48149 Münster, Germany
- Indian Institute of Science Education and Research, Dr. Homi Bhabha Road, 411008 Pune, India
| | - Robert Schneider
- Institute of Physics and Center for Nanotechnology, University of Münster, 48149 Münster, Germany
| | - Nianjheng Wu
- Université Paris-Saclay, CNRS, Laboratoire de Physique des Solides, 91405 Orsay, France
- Université Paris-Saclay, CNRS, Institut des Sciences Moléculaires d'Orsay, 91405 Orsay, France
| | - Andrew J Mayne
- Université Paris-Saclay, CNRS, Institut des Sciences Moléculaires d'Orsay, 91405 Orsay, France
| | - Ching-Hwa Ho
- Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 106, Taiwan
| | - Mauro Och
- Department of Materials, Imperial College London, London SW7 2AZ, U.K
| | - Cecilia Mattevi
- Department of Materials, Imperial College London, London SW7 2AZ, U.K
| | - Antoine Reserbat-Plantey
- ICFO-Institut de Ciències Fotòniques, The Barcelona Institute of Science and Technology, 08860 Castelldefels, Spain
- Université Côte d'Azur, CNRS, CRHEA, 06560 Valbonne, Sophia-Antipolis, France
| | - Álvaro Moreno
- ICFO-Institut de Ciències Fotòniques, The Barcelona Institute of Science and Technology, 08860 Castelldefels, Spain
| | - Hanan Herzig Sheinfux
- ICFO-Institut de Ciències Fotòniques, The Barcelona Institute of Science and Technology, 08860 Castelldefels, Spain
- Department of Physics, Bar-Ilan University, Ramat Gan 5290002, Israel
| | - Kenji Watanabe
- Research Center for Electronic and Optical Materials, National Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan
| | - Takashi Taniguchi
- Research Center for Materials Nanoarchitectonics, National Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan
| | | | - Frank H L Koppens
- ICFO-Institut de Ciències Fotòniques, The Barcelona Institute of Science and Technology, 08860 Castelldefels, Spain
- ICREA-Institució Catalana de Recerca i Estudis Avançats, Passeig Lluís Companys 23, 08010 Barcelona, Spain
| | - Zhichuan Niu
- State Key Laboratory for Superlattices and Microstructures, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China
- College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Sciences, Beijing 100083, China
| | - Odile Stéphan
- Université Paris-Saclay, CNRS, Laboratoire de Physique des Solides, 91405 Orsay, France
| | - Mathieu Kociak
- Université Paris-Saclay, CNRS, Laboratoire de Physique des Solides, 91405 Orsay, France
| | - F Javier García de Abajo
- ICFO-Institut de Ciències Fotòniques, The Barcelona Institute of Science and Technology, 08860 Castelldefels, Spain
- ICREA-Institució Catalana de Recerca i Estudis Avançats, Passeig Lluís Companys 23, 08010 Barcelona, Spain
| | - Rudolf Bratschitsch
- Institute of Physics and Center for Nanotechnology, University of Münster, 48149 Münster, Germany
| | - Andrea Konečná
- Central European Institute of Technology, Brno University of Technology, Brno 612 00, Czech Republic
- Institute of Physical Engineering, Brno University of Technology, Brno 616 69, Czech Republic
| | - Luiz H G Tizei
- Université Paris-Saclay, CNRS, Laboratoire de Physique des Solides, 91405 Orsay, France
| |
Collapse
|
5
|
Ko JH, Park J, Yoo YJ, Chang S, Kang J, Wu A, Yang F, Kim S, Jeon H, Song YM. Full-Control and Switching of Optical Fano Resonance by Continuum State Engineering. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2304310. [PMID: 37691086 PMCID: PMC10646235 DOI: 10.1002/advs.202304310] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/27/2023] [Revised: 08/01/2023] [Indexed: 09/12/2023]
Abstract
Fano resonance, known for its unique asymmetric line shape, has gained significant attention in photonics, particularly in sensing applications. However, it remains difficult to achieve controllable Fano parameters with a simple geometric structure. Here, a novel approach of using a thin-film optical Fano resonator with a porous layer to generate entire spectral shapes from quasi-Lorentzian to Lorentzian to Fano is proposed and experimentally demonstrated. The glancing angle deposition technique is utilized to create a polarization-dependent Fano resonator. By altering the linear polarization between s- and p-polarization, a switchable Fano device between quasi-Lorentz state and negative Fano state is demonstrated. This change in spectral shape is advantageous for detecting materials with a low-refractive index. A bio-particle sensing experiment is conducted that demonstrates an enhanced signal-to-noise ratio and prediction accuracy. Finally, the challenge of optimizing the film-based Fano resonator due to intricate interplay among numerous parameters, including layer thicknesses, porosity, and materials selection, is addressed. The inverse design tool is developed based on a multilayer perceptron model that allows fast computation for all ranges of Fano parameters. The method provides improved accuracy of the mean validation factor (MVF = 0.07, q-q') compared to the conventional exhaustive enumeration method (MVF = 0.37).
Collapse
Affiliation(s)
- Joo Hwan Ko
- School of Electrical Engineering and Computer ScienceGwangju Institute of Science and TechnologyGwangju61005Republic of Korea
| | - Jin‐Hwi Park
- Artificial Intelligence Graduate SchoolGwangju Institute of Science and TechnologyGwangju61005Republic of Korea
| | - Young Jin Yoo
- School of Electrical Engineering and Computer ScienceGwangju Institute of Science and TechnologyGwangju61005Republic of Korea
- Department of Mechanical EngineeringMassachusetts Institute of TechnologyCambridgeMA02139USA
| | - Sehui Chang
- School of Electrical Engineering and Computer ScienceGwangju Institute of Science and TechnologyGwangju61005Republic of Korea
| | - Jiwon Kang
- School of Electrical Engineering and Computer ScienceGwangju Institute of Science and TechnologyGwangju61005Republic of Korea
| | - Aiguo Wu
- Cixi Institute of Biomedical EngineeringInternational Cooperation Base of Biomedical Materials Technology and ApplicationChinese Academy of Sciences (CAS) KeyLaboratory of Magnetic Materials and DevicesZhejiang Engineering Research Center for Biomedical MaterialsNingbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingboZhejiang315201China
- Advanced Energy Science and Technology Guangdong LaboratoryHuizhou516000China
| | - Fang Yang
- Cixi Institute of Biomedical EngineeringInternational Cooperation Base of Biomedical Materials Technology and ApplicationChinese Academy of Sciences (CAS) KeyLaboratory of Magnetic Materials and DevicesZhejiang Engineering Research Center for Biomedical MaterialsNingbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingboZhejiang315201China
- Advanced Energy Science and Technology Guangdong LaboratoryHuizhou516000China
| | - Sejeong Kim
- Department of Electrical and Electronic EngineeringUniversity of MelbourneParkville3010Australia
| | - Hae‐Gon Jeon
- School of Electrical Engineering and Computer ScienceGwangju Institute of Science and TechnologyGwangju61005Republic of Korea
- Artificial Intelligence Graduate SchoolGwangju Institute of Science and TechnologyGwangju61005Republic of Korea
| | - Young Min Song
- School of Electrical Engineering and Computer ScienceGwangju Institute of Science and TechnologyGwangju61005Republic of Korea
- Artificial Intelligence Graduate SchoolGwangju Institute of Science and TechnologyGwangju61005Republic of Korea
| |
Collapse
|
6
|
Chen J, Song G, Cong S, Zhao Z. Resonant-Cavity-Enhanced Electrochromic Materials and Devices. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2300179. [PMID: 36929668 DOI: 10.1002/adma.202300179] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/06/2023] [Revised: 02/26/2023] [Indexed: 06/18/2023]
Abstract
With rapid advances in optoelectronics, electrochromic materials and devices have received tremendous attentions from both industry and academia for their strong potentials in wearable and portable electronics, displays/billboards, adaptive camouflage, tunable optics, and intelligent devices, etc. However, conventional electrochromic materials and devices typically present some serious limitations such as undesirable dull colors, and long switching time, hindering their deeper development. Optical resonators have been proven to be the most powerful platform for providing strong optical confinement and controllable lightmatter interactions. They generate locally enhanced electromagnetic near-fields that can convert small refractive index changes in electrochromic materials into high-contrast color variations, enabling multicolor or even panchromatic tuning of electrochromic materials. Here, resonant-cavity-enhanced electrochromic materials and devices, an advanced and emerging trend in electrochromics, are reviewed. In this review, w e will focus on the progress in multicolor electrochromic materials and devices based on different types of optical resonators and their advanced and emerging applications, including multichromatic displays, adaptive visible camouflage, visualized energy storage, and applications of multispectral tunability. Among these topics, principles of optical resonators, related materials/devices and multicolor electrochromic properties are comprehensively discussed and summarized. Finally, the challenges and prospects for resonant-cavity-enhanced electrochromic materials and devices are presented.
Collapse
Affiliation(s)
- Jian Chen
- School of Nano-Tech and Nano-Bionics, University of Science and Technology of China, Hefei, 230026, China
- Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Ge Song
- Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Shan Cong
- School of Nano-Tech and Nano-Bionics, University of Science and Technology of China, Hefei, 230026, China
- Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Zhigang Zhao
- School of Nano-Tech and Nano-Bionics, University of Science and Technology of China, Hefei, 230026, China
- Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| |
Collapse
|
7
|
ElKabbash M, Hoffman N, Lininger AR, Jalil SA, Letsou T, Hinczewski M, Strangi G, Guo C. Fano resonant optical coatings platform for full gamut and high purity structural colors. Nat Commun 2023; 14:3960. [PMID: 37407559 DOI: 10.1038/s41467-023-39602-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/18/2022] [Accepted: 06/16/2023] [Indexed: 07/07/2023] Open
Abstract
Structural coloring is a photostable and environmentally friendly coloring approach that harnesses optical interference and nanophotonic resonances to obtain colors with a range of applications including display technologies, colorful solar panels, steganography, décor, data storage, and anticounterfeiting measures. We show that optical coatings exhibiting the photonic Fano Resonance present an ideal platform for structural coloring; they provide full color access, high color purity, high brightness, controlled iridescence, and scalable manufacturing. We show that an additional oxide film deposited on Fano resonant optical coatings (FROCs) increases the color purity (up to 99%) and color gamut coverage range of FROCs to 61% of the CIE color space. For wide-area structural coloring applications, FROCs have a significant advantage over existing structural coloring schemes.
Collapse
Affiliation(s)
- Mohamed ElKabbash
- The Institute of Optics, University of Rochester, Rochester, NY, 14627, USA.
- College of Optical Sciences, University of Arizona, Tucson, AZ, 85721, USA.
| | - Nathaniel Hoffman
- Department of Physics, Case Western Reserve University, 10600 Euclid Avenue, Cleveland, Ohio, 44106, USA
| | - Andrew R Lininger
- Department of Physics, Case Western Reserve University, 10600 Euclid Avenue, Cleveland, Ohio, 44106, USA
| | - Sohail A Jalil
- The Institute of Optics, University of Rochester, Rochester, NY, 14627, USA
| | - Theodore Letsou
- Department of Physics, Case Western Reserve University, 10600 Euclid Avenue, Cleveland, Ohio, 44106, USA
| | - Michael Hinczewski
- Department of Physics, Case Western Reserve University, 10600 Euclid Avenue, Cleveland, Ohio, 44106, USA.
| | - Giuseppe Strangi
- Department of Physics, Case Western Reserve University, 10600 Euclid Avenue, Cleveland, Ohio, 44106, USA.
- CNR-NANOTEC and the Department of Physics University of Calabria, Rende, Italy.
| | - Chunlei Guo
- The Institute of Optics, University of Rochester, Rochester, NY, 14627, USA.
| |
Collapse
|
8
|
Lu H, Li D, Shi S, Li Y, Zhao J. Exciton-induced Fano resonance in metallic nanocavity with tungsten disulfide atomic layer. OPTICS EXPRESS 2023; 31:20761-20768. [PMID: 37381192 DOI: 10.1364/oe.494083] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/25/2023] [Accepted: 05/27/2023] [Indexed: 06/30/2023]
Abstract
Photon-exciton coupling behaviors in optical nanocavities attract broad attention due to their crucial applications in light manipulation and emission. Herein, we experimentally observed a Fano-like resonance with asymmetrical spectral response in an ultrathin metal-dielectric-metal (MDM) cavity integrated with an atomic-layer tungsten disulfide (WS2). The resonance wavelength of an MDM nanocavity can be flexibly controlled by adjusting dielectric layer thickness. The results measured by the home-made microscopic spectrometer agree well with the numerical simulations. A temporal coupled-mode theoretical model was established to analyze the formation mechanism of Fano resonance in the ultrathin cavity. The theoretical analysis reveals that the Fano resonance is attributed to a weak coupling between the resonance photons in the nanocavity and excitons in the WS2 atomic layer. The results will pave a new way for exciton-induced generation of Fano resonance and light spectral manipulation at the nanoscale.
Collapse
|
9
|
Prabhathan P, Sreekanth KV, Teng J, Singh R. Electrically Tunable Steganographic Nano-Optical Coatings. NANO LETTERS 2023. [PMID: 37200154 DOI: 10.1021/acs.nanolett.3c01244] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
Thin film coatings with tunable colors have a broad range of applications, from solid-state reflective displays to steganography. Here, we propose a novel approach to chalcogenide phase change material (PCM)-incorporated steganographic nano-optical coatings (SNOC) as thin film color reflectors for optical steganography. The proposed SNOC design combines a broad-band and a narrow-band absorber made up of PCMs to achieve tunable optical Fano resonance in the visible wavelength, which is a scalable platform for accessing the full-color range. We demonstrate that the line width of the Fano resonance can be dynamically tuned by switching the structural phase of PCM from amorphous to crystalline, which is crucial for obtaining high-purity colors. For steganography applications, the cavity layer of SNOC is divided into an ultralow loss PCM and a high index dielectric material with identical optical thickness. We show that electrically tunable color pixels can be fabricated using the SNOC on a microheater device.
Collapse
Affiliation(s)
- Patinharekandy Prabhathan
- Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore, 637371, Singapore
- Centre for Disruptive Photonic Technologies, The Photonic Institute, 50 Nanyang Avenue, Singapore, 639798, Singapore
| | - Kandammathe Valiyaveedu Sreekanth
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore, 138634, Republic of Singapore
| | - Jinghua Teng
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore, 138634, Republic of Singapore
| | - Ranjan Singh
- Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore, 637371, Singapore
- Centre for Disruptive Photonic Technologies, The Photonic Institute, 50 Nanyang Avenue, Singapore, 639798, Singapore
| |
Collapse
|
10
|
High-speed laser writing of structural colors for full-color inkless printing. Nat Commun 2023; 14:565. [PMID: 36732539 PMCID: PMC9894925 DOI: 10.1038/s41467-023-36275-9] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2022] [Accepted: 01/24/2023] [Indexed: 02/04/2023] Open
Abstract
It is a formidable challenge to simultaneously achieve wide-gamut, high-resolution, high-speed while low-cost manufacturability, long-term stability, and viewing-angle independence in structural colors for practical applications. The conventional nanofabrication techniques fail to match the requirement in low-cost, large-scale and flexible manufacturing. Processing by pulsed lasers can achieve high throughput while suffering from a narrow gamut of ~15% sRGB or angle-dependent colors. Here, we demonstrate an all-in-one solution for ultrafast laser-produced structural colors on ultrathin hybrid films that comprise an absorbent dielectric TiAlN layer coating on a metallic TiN layer. Under laser irradiation, the absorption behaviours of the TiAlN-TiN hybrid films are tailored by photothermal-induced oxidation on the topmost TiAlN. The oxidized films exhibit double-resonance absorption, which is due to the non-trivial phase shifts both at the oxide-TiAlN interface, and at the TiAlN-TiN interface. By varying the accumulated laser fluence to modulate the oxidation depth, angle-robust structural colors with unprecedented large-gamut of ~90% sRGB are obtained. The highest printing speed reaches 10 cm2/s and the highest resolution exceeds 10000 dpi. The durability of the laser-printed colors is confirmed by fastness examination, including salt spray, double-85, light bleaching, and adhesion tests. These features render our technique to be competitive for industrial applications.
Collapse
|
11
|
Jin S, Xiao M, Zhang W, Wang B, Zhao C. Daytime Sub-Ambient Radiative Cooling with Vivid Structural Colors Mediated by Coupled Nanocavities. ACS APPLIED MATERIALS & INTERFACES 2022; 14:54676-54687. [PMID: 36454716 DOI: 10.1021/acsami.2c15573] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Daytime radiative cooling is a promising passive cooling technology for combating global warming. Existing daytime radiative coolers usually show whitish colors due to their high broadband solar reflectivity, which is not suitable for aesthetic demands and effective display. It is challenging to produce high-cooling performance materials with vivid colors because colors are often produced by the absorption of visible light, decreasing net cooling power. In this work, we design a series of colorful multilayered radiative coolers (CMRCs) consisting of an optimized selective emitter for cooling and coupled nanocavities for structural coloration, which can successfully delicately balance the trade-off between the chromaticity and cooling performance. By judiciously designing the geometric parameters and manipulating the coupling effect inside the coupled nanocavities, our coolers show sub-ambient cooling performance and a larger color gamut (occupying 17.7% sRGB area) than reported ones. We further fabricate CMRCs and demonstrate that they have temperature drops of 3.4-4.4 °C on average based on outdoor experiments. These CMRCs are promising in thermal management of electronic/optoelectronic devices and outdoor facilities.
Collapse
Affiliation(s)
- Shenghao Jin
- Institute of Engineering Thermophysics, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Ming Xiao
- College of Polymer Science and Engineering, Sichuan University, Chengdu610065, China
| | - Wenbin Zhang
- Institute of Engineering Thermophysics, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Boxiang Wang
- Institute of Engineering Thermophysics, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Changying Zhao
- Institute of Engineering Thermophysics, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| |
Collapse
|
12
|
Takashima Y, Nagamatsu K, Haraguchi M, Naoi Y. Ultra-thin deep ultraviolet perfect absorber using an Al/TiO 2/AlN system. OPTICS EXPRESS 2022; 30:44229-44239. [PMID: 36523102 DOI: 10.1364/oe.474847] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/04/2022] [Accepted: 11/01/2022] [Indexed: 06/17/2023]
Abstract
An ultra-thin perfect absorber for deep ultraviolet light was realized using an Al/TiO2/AlN system. The TiO2 thickness was optimized using the Fresnel phasor diagram in complex space to achieve perfect light absorption. As a result of the calculation almost perfect absorption into the TiO2 film was found, despite the film being much thinner than the wavelength. An optimized Al/TiO2/AlN system was fabricated, and an average absorption greater than 97% was experimentally demonstrated at wavelengths of approximately 255-280 nm at normal light incidence. Our structure does not require nanopatterning processes, and this is advantageous for low-cost and large-area manufacturing.
Collapse
|
13
|
Li M, Hu H, Liu B, Liu X, Zheng ZG, Tian H, Zhu WH. Light-Reconfiguring Inhomogeneous Soft Helical Pitch with Fatigue Resistance and Reversibility. J Am Chem Soc 2022; 144:20773-20784. [DOI: 10.1021/jacs.2c08505] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Mengqi Li
- Key Laboratory for Advanced Materials and Joint International Research Laboratory of Precision Chemistry and Molecular Engineering, Shanghai Key Laboratory of Functional Materials Chemistry, Feringa Nobel Prize Scientist Joint Research Center, Institute of Fine Chemicals, Frontiers Science Center for Materiobiology and Dynamic Chemistry, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Honglong Hu
- Key Laboratory for Advanced Materials and Joint International Research Laboratory of Precision Chemistry and Molecular Engineering, Shanghai Key Laboratory of Functional Materials Chemistry, Feringa Nobel Prize Scientist Joint Research Center, Institute of Fine Chemicals, Frontiers Science Center for Materiobiology and Dynamic Chemistry, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Binghui Liu
- School of Physics, East China University of Science and Technology, Shanghai 200237, China
| | - Xuan Liu
- School of Physics, East China University of Science and Technology, Shanghai 200237, China
| | - Zhi-Gang Zheng
- School of Physics, East China University of Science and Technology, Shanghai 200237, China
| | - He Tian
- Key Laboratory for Advanced Materials and Joint International Research Laboratory of Precision Chemistry and Molecular Engineering, Shanghai Key Laboratory of Functional Materials Chemistry, Feringa Nobel Prize Scientist Joint Research Center, Institute of Fine Chemicals, Frontiers Science Center for Materiobiology and Dynamic Chemistry, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Wei-Hong Zhu
- Key Laboratory for Advanced Materials and Joint International Research Laboratory of Precision Chemistry and Molecular Engineering, Shanghai Key Laboratory of Functional Materials Chemistry, Feringa Nobel Prize Scientist Joint Research Center, Institute of Fine Chemicals, Frontiers Science Center for Materiobiology and Dynamic Chemistry, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai 200237, China
| |
Collapse
|
14
|
Fu Q, Dai J, Huang X, Dai Y, Pan Y, Yang L, Sun Z, Miao T, Zhou M, Zhao L, Zhao W, Han X, Lu J, Gao H, Zhou X, Wang Y, Ni Z, Ji W, Huang Y. One-Step Exfoliation Method for Plasmonic Activation of Large-Area 2D Crystals. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2204247. [PMID: 36104244 PMCID: PMC9661865 DOI: 10.1002/advs.202204247] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/08/2022] [Indexed: 06/01/2023]
Abstract
Advanced exfoliation techniques are crucial for exploring the intrinsic properties and applications of 2D materials. Though the recently discovered Au-enhanced exfoliation technique provides an effective strategy for the preparation of large-scale 2D crystals, the high cost of gold hinders this method from being widely adopted in industrial applications. In addition, direct Au contact could significantly quench photoluminescence (PL) emission in 2D semiconductors. It is therefore crucial to find alternative metals that can replace gold to achieve efficient exfoliation of 2D materials. Here, the authors present a one-step Ag-assisted method that can efficiently exfoliate many large-area 2D monolayers, where the yield ratio is comparable to Au-enhanced exfoliation method. Differing from Au film, however, the surface roughness of as-prepared Ag films on SiO2 /Si substrate is much higher, which facilitates the generation of surface plasmons resulting from the nanostructures formed on the rough Ag surface. More interestingly, the strong coupling between 2D semiconductor crystals (e.g., MoS2 , MoSe2 ) and Ag film leads to a unique PL enhancement that has not been observed in other mechanical exfoliation techniques, which can be mainly attributed to enhanced light-matter interaction as a result of extended propagation of surface plasmonic polariton (SPP). This work provides a lower-cost and universal Ag-assisted exfoliation method, while at the same time offering enhanced SPP-matter interactions.
Collapse
Affiliation(s)
- Qiang Fu
- Advanced Research Institute of Multidisciplinary ScienceBeijing Institute of TechnologyBeijing100081P. R. China
- School of Physics and Key Laboratory of MEMS of the Ministry of EducationSoutheast UniversityNanjing211189P. R. China
- Institute of PhysicsChinese Academy of ScienceBeijing100190P. R. China
| | - Jia‐Qi Dai
- Department of Physics and Beijing Key Laboratory of Optoelectronic Functional Materials & Micro‐Nano DevicesRenmin University of ChinaBeijing100872P. R. China
| | - Xin‐Yu Huang
- Advanced Research Institute of Multidisciplinary ScienceBeijing Institute of TechnologyBeijing100081P. R. China
| | - Yun‐Yun Dai
- Advanced Research Institute of Multidisciplinary ScienceBeijing Institute of TechnologyBeijing100081P. R. China
| | - Yu‐Hao Pan
- China North Vehicle Research InstituteBeijing100072P. R. China
| | - Long‐Long Yang
- Institute of PhysicsChinese Academy of ScienceBeijing100190P. R. China
| | - Zhen‐Yu Sun
- Institute of PhysicsChinese Academy of ScienceBeijing100190P. R. China
| | - Tai‐Min Miao
- Institute of PhysicsChinese Academy of ScienceBeijing100190P. R. China
| | - Meng‐Fan Zhou
- School of Physics and Key Laboratory of MEMS of the Ministry of EducationSoutheast UniversityNanjing211189P. R. China
| | - Lin Zhao
- Institute of PhysicsChinese Academy of ScienceBeijing100190P. R. China
- Songshan Lake Materials LaboratoryDongguan523808P. R. China
| | - Wei‐Jie Zhao
- School of Physics and Key Laboratory of MEMS of the Ministry of EducationSoutheast UniversityNanjing211189P. R. China
| | - Xu Han
- Advanced Research Institute of Multidisciplinary ScienceBeijing Institute of TechnologyBeijing100081P. R. China
- Institute of PhysicsChinese Academy of ScienceBeijing100190P. R. China
| | - Jun‐Peng Lu
- School of Physics and Key Laboratory of MEMS of the Ministry of EducationSoutheast UniversityNanjing211189P. R. China
| | - Hong‐Jun Gao
- Institute of PhysicsChinese Academy of ScienceBeijing100190P. R. China
- University of Chinese Academy of SciencesBeijing100049P. R. China
| | - Xing‐Jiang Zhou
- Institute of PhysicsChinese Academy of ScienceBeijing100190P. R. China
- Songshan Lake Materials LaboratoryDongguan523808P. R. China
- University of Chinese Academy of SciencesBeijing100049P. R. China
| | - Ye‐Liang Wang
- Advanced Research Institute of Multidisciplinary ScienceBeijing Institute of TechnologyBeijing100081P. R. China
| | - Zhen‐Hua Ni
- School of Physics and Key Laboratory of MEMS of the Ministry of EducationSoutheast UniversityNanjing211189P. R. China
| | - Wei Ji
- Department of Physics and Beijing Key Laboratory of Optoelectronic Functional Materials & Micro‐Nano DevicesRenmin University of ChinaBeijing100872P. R. China
| | - Yuan Huang
- Advanced Research Institute of Multidisciplinary ScienceBeijing Institute of TechnologyBeijing100081P. R. China
- Institute of PhysicsChinese Academy of ScienceBeijing100190P. R. China
| |
Collapse
|
15
|
Li W, Xu M, Xu HX, Wang X, Huang W. Metamaterial Absorbers: From Tunable Surface to Structural Transformation. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2202509. [PMID: 35604541 DOI: 10.1002/adma.202202509] [Citation(s) in RCA: 23] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/18/2022] [Revised: 04/28/2022] [Indexed: 06/15/2023]
Abstract
Since the first demonstration, remarkable progress has been made in the theoretical analysis, structural design, numerical simulation, and potential applications of metamaterial absorbers (MAs). With the continuous advancement of novel materials and creative designs, the absorption of MAs is significantly improved over a wide frequency spectrum from microwaves to the optical regime. Further, the integration of active elements into the MA design allows the dynamical manipulation of electromagnetic waves, opening a new platform to push breakthroughs in metadevices. In the last several years, numerous efforts have been devoted to exploring innovative approaches for incorporating tunability to MAs, which is highly desirable because of the progressively increasing demand on designing versatile metadevices. Here, a comprehensive and systematical overview of active MAs with adaptive and on-demand manner is presented, highlighting innovative materials and unique strategies to precisely control the electromagnetic response. In addition to the mainstream method by manipulating periodic patterns, two additional approaches, including tailoring dielectric spacer and transforming overall structure are called back. Following this, key parameters, such as operating frequency, relative tuning range, and switching speed are summarized and compared to guide for optimum design. Finally, potential opportunities in the development of active MAs are discussed.
Collapse
Affiliation(s)
- Weiwei Li
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, P. R. China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, P. R. China
| | - Manzhang Xu
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, P. R. China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, P. R. China
| | - He-Xiu Xu
- Air and Missile Defense College, Air Force Engineering University, Xi'an, 710051, P. R. China
| | - Xuewen Wang
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, P. R. China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, P. R. China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, P. R. China
| | - Wei Huang
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, P. R. China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, P. R. China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, P. R. China
- State Key Laboratory of Organic Electronics and Information Displays, Institute of Advanced Materials (IAM), Nanjing University of Posts & Telecommunications, Nanjing, 210023, P. R. China
- Key Laboratory of Flexible Electronics(KLoFE)and Institute of Advanced Materials (IAM), Nanjing Tech University (NanjingTech), Nanjing, 211800, P. R. China
| |
Collapse
|
16
|
Geng J, Yan W, Shi L, Qiu M. Surface plasmons interference nanogratings: wafer-scale laser direct structuring in seconds. LIGHT, SCIENCE & APPLICATIONS 2022; 11:189. [PMID: 35739105 PMCID: PMC9226179 DOI: 10.1038/s41377-022-00883-9] [Citation(s) in RCA: 15] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/22/2022] [Revised: 06/02/2022] [Accepted: 06/10/2022] [Indexed: 05/20/2023]
Abstract
It is always a great challenge to bridge the nano- and macro-worlds in nanoscience, for instance, manufacturing uniform nanogratings on a whole wafer in seconds instead of hours even days. Here, we demonstrate a single-step while extremely high-throughput femtosecond laser scanning technique to obtain wafer-scale, highly regular nanogratings on semiconductor-on-metal thin films. Our technique takes advantage of long-range surface plasmons-laser interference, which is regulated by a self-initiated seed. By controlling the scanning speed, two types of nanogratings are readily manufactured, which are produced by either oxidation or ablation. We achieve a record manufacturing speed (>1 cm2 s-1), with tunable periodicity of Λ < 1 µm. The fractional variation of their periodicity is evaluated to be as low as ∆Λ/Λ ≈ 0.5%. Furthermore, by utilizing the semiconductor-on-metal film-endowed interference effects, an extremely high energy efficiency is achieved via suppressing light reflection during femtosecond laser nano-processing. As the fabricated nanogratings exhibit multi-functionality, we exemplify their practical applications in highly sensitive refractive index sensing, vivid structural colors, and durable superhydrophilicity.
Collapse
Affiliation(s)
- Jiao Geng
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, 18 Shilongshan Road, Hangzhou, 310024, Zhejiang Province, China
- Institute of Advanced Technology, Westlake Institute for Advanced Study, 18 Shilongshan Road, Hangzhou, 310024, Zhejiang Province, China
| | - Wei Yan
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, 18 Shilongshan Road, Hangzhou, 310024, Zhejiang Province, China
- Institute of Advanced Technology, Westlake Institute for Advanced Study, 18 Shilongshan Road, Hangzhou, 310024, Zhejiang Province, China
| | - Liping Shi
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, 18 Shilongshan Road, Hangzhou, 310024, Zhejiang Province, China.
- Institute of Advanced Technology, Westlake Institute for Advanced Study, 18 Shilongshan Road, Hangzhou, 310024, Zhejiang Province, China.
| | - Min Qiu
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, 18 Shilongshan Road, Hangzhou, 310024, Zhejiang Province, China.
- Institute of Advanced Technology, Westlake Institute for Advanced Study, 18 Shilongshan Road, Hangzhou, 310024, Zhejiang Province, China.
| |
Collapse
|
17
|
Lien-Medrano CR, Bonafé FP, Yam CY, Palma CA, Sánchez CG, Frauenheim T. Fano Resonance and Incoherent Interlayer Excitons in Molecular van der Waals Heterostructures. NANO LETTERS 2022; 22:911-917. [PMID: 35040646 DOI: 10.1021/acs.nanolett.1c03441] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Complex van der Waals heterostructures from layered molecular stacks are promising optoelectronic materials offering the means to efficient, modular charge separation and collection layers. The effect of stacking in the electrodynamics of such hybrid organic-inorganic two-dimensional materials remains largely unexplored, whereby molecular scale engineering could lead to advanced optical phenomena. For instance, tunable Fano engineering could make possible on-demand transparent conducting layers or photoactive elements, and passive cooling. We employ an adapted Gersten-Nitzan model and real time time-dependent density functional tight-binding to study the optoelectronics of self-assembled monolayers on graphene nanoribbons. We find Fano resonances that cause electromagnetic induced opacity and transparency and reveal an additional incoherent process leading to interlayer exciton formation with a characteristic charge transfer rate. These results showcase hybrid van der Waals heterostructures as paradigmatic 2D optoelectronic stacks, featuring tunable Fano optics and unconventional charge transfer channels.
Collapse
Affiliation(s)
- Carlos R Lien-Medrano
- Bremen Center for Computational Materials Science, University of Bremen, Bremen 28359, Germany
| | - Franco P Bonafé
- Max Planck Institute for the Structure and Dynamics of Matter, Hamburg 22761, Germany
| | - Chi Yung Yam
- Shenzen JL Computational Science and Applied Research Institute (CSAR), Shenzhen 518110, P. R. China
| | - Carlos-Andres Palma
- Institute of Physics, Chinese Academy of Sciences, Beijing 100190, P.R. China
- Department of Physics & IRIS Adlershof, Humboldt-Universität zur Berlin, Berlin 12489, Germany
| | - Cristián G Sánchez
- Instituto Interdisciplinario de Ciencias Básicas, Universidad Nacional de Cuyo, Mendoza M5502JMA, Argentina
| | - Thomas Frauenheim
- Bremen Center for Computational Materials Science, University of Bremen, Bremen 28359, Germany
- Shenzen JL Computational Science and Applied Research Institute (CSAR), Shenzhen 518110, P. R. China
- Beijing Computational Science Research Center, 100193 Beijing, P. R. China
| |
Collapse
|
18
|
Cho JW, Lee EJ, Kim SK. Full-Color Solar-Heat-Resistant Films Based on Nanometer Optical Coatings. NANO LETTERS 2022; 22:380-388. [PMID: 34958577 DOI: 10.1021/acs.nanolett.1c04043] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Nanometer optical coatings with absorbing materials allow the tuning of structured absorption spectra, thus developing ultrathin color devices. However, these coatings are limited by the narrow bandwidth and tunability of wavelength that restrict the chroma and hue characteristics of colors, respectively, apart from imposing adverse thermal problems under sunlight exposure. Here, we demonstrate that inversely designed TiN/ZnS/Ag coatings attain a wide color gamut in the trilayer configuration and efficiently dissipate heat through thermal radiation when transfer-printed on high-emissivity polymers. Daytime experiments reveal that fabricated optical films yield an almost color-independent heat dissipation rate against solar heating. Moreover, they outperform commercial paints of the same color when applied to three-dimensional miniature houses. All magenta, green, cyan, and yellow optical films lower the roof temperature by 10, 6, 8, and 2 °C below one sun irradiance, respectively, compared to their paint counterparts; the temperature gradient increases directly with the level of sunlight.
Collapse
Affiliation(s)
- Jin-Woo Cho
- Department of Applied Physics, Kyung Hee University, Yongin 17104, Republic of Korea
| | - Eun-Joo Lee
- Department of Applied Physics, Kyung Hee University, Yongin 17104, Republic of Korea
| | - Sun-Kyung Kim
- Department of Applied Physics, Kyung Hee University, Yongin 17104, Republic of Korea
| |
Collapse
|
19
|
Sreekanth KV, Medwal R, Srivastava YK, Manjappa M, Rawat RS, Singh R. Dynamic Color Generation with Electrically Tunable Thin Film Optical Coatings. NANO LETTERS 2021; 21:10070-10075. [PMID: 34802245 DOI: 10.1021/acs.nanolett.1c03817] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Thin film optical coatings have a wide range of industrial applications from displays and lighting to photovoltaic cells. The realization of electrically tunable thin film optical coatings in the visible wavelength range is particularly important to develop energy efficient and dynamic color filters. Here, we experimentally demonstrate dynamic color generation using electrically tunable thin film optical coatings that consist of two different phase change materials (PCMs). The proposed active thin film nanocavity excites the Fano resonance that results from the coupling of a broadband and a narrowband absorber made up of phase change materials. The Fano resonance is then electrically tuned by structural phase switching of PCM layers to demonstrate active color filters covering the entire visible spectrum. In contrast to existing thin film optical coatings, the developed electrically tunable PCM based Fano resonant thin optical coatings have several advantages in tunable displays and active nanophotonic applications.
Collapse
Affiliation(s)
- Kandammathe Valiyaveedu Sreekanth
- Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371
- Centre for Disruptive Photonic Technologies, The Photonic Institute, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798
| | - Rohit Medwal
- Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, 1 Nanyang Walk, Singapore 637616
| | - Yogesh Kumar Srivastava
- Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371
- Centre for Disruptive Photonic Technologies, The Photonic Institute, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798
| | - Manukumara Manjappa
- Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371
- Centre for Disruptive Photonic Technologies, The Photonic Institute, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798
| | - Rajdeep Singh Rawat
- Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, 1 Nanyang Walk, Singapore 637616
| | - Ranjan Singh
- Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371
- Centre for Disruptive Photonic Technologies, The Photonic Institute, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798
| |
Collapse
|
20
|
Lee EJ, Cho JW, Kim YS, Kim SK. Nanometer-optical-coating-based visibly tinted films with 24-hour sub-atmospheric passive cooling. OPTICS LETTERS 2021; 46:5043-5046. [PMID: 34598265 DOI: 10.1364/ol.440878] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/30/2021] [Accepted: 09/14/2021] [Indexed: 06/13/2023]
Abstract
Colored films absorb solar radiation at specific visible wavelengths, and they consequently heat up above atmospheric temperatures when exposed to sunlight. In this Letter, we report nanometer-thick TiN-based multilayers of light cyan, magenta, and yellow colors that can provide 24 h sub-atmospheric cooling when covered with high-emissivity polymers. Outdoor experiments have demonstrated that these visibly tinted films retain sub-atmospheric temperatures during daytime and nighttime. All fabricated films generated almost color-independent cooling powers and even surpassed commercial white paint at TiN thicknesses <5nm. Our work thus highlights the potential of multispectral selective absorbers as esthetic passive coolers.
Collapse
|