Tomographic reconstruction of oxygen orbitals in lithium-rich battery materials

Unveiling the Nature of Chemical Bonds in Real Space

Recent advent of diverse chemical entities necessitates a re-evaluation of chemical bond concepts, underscoring the importance of experimental evidence. Our prior study introduced a general methodology, termed Core Differential Fourier Synthesis (CDFS), for mapping the distribution of valence electron density (VED) in crystalline substances within real space. In this study, we directly compare the VED distributions obtained through CDFS with those derived from high-accuracy theoretical calculation using long-range corrected density functional theory, which quantitatively reproduces accurate orbital energies. This comparison serves to demonstrate the precision of the CDFS in replicating complex details. The VED patterns observed experimentally exhibited detailed structures and phases of wave functions indicative of sp3 hybrid orbitals, closely aligning with theoretical predictions. This alignment underscores the utility of our approach in gathering quantum chemical data experimentally, a crucial step for discussing the chemical properties, such as reaction mechanisms.

Van der Waals phase transition investigation toward high-voltage layered cathodes

High-voltage phase transition constitutes the major barrier to accessing high energy density in layered cathodes. However, questions remain regarding the origin of phase transition, because the interlayer weak bonding features cannot get an accurate description by experiments. Here, we determined van der Waals (vdW) interaction (vdWi) in LixCoO2 via visualizing its electron density, elucidating the origin of O3─O1 phase transition. The charge around oxygen is distorted by the increasing Co─O covalency. The charge distortion causes the difference of vdW gap between O3 and O1 phases, verified by a gap corrected vdW equation. In a high charging state, excessive covalency breaks the vdW gap balance, driving the O3 phase toward a stable O1 one. This interpretation of vdWi-dominated phase transition can be applied to other layered materials, as shown by a map regarding degree of covalence. Last, we introduce the cationic potential to provide a solution for designing high-voltage layered cathodes.

Mapping of lithium ion concentrations in 3D structures through development of in situ correlative imaging of X-ray Compton scattering-computed tomography

Understanding the correlation between chemical and microstructural properties is critical for unraveling the fundamental relationship between materials chemistry and physical structures that can benefit materials science and engineering. Here, we demonstrate novel in situ correlative imaging of the X-ray Compton scattering computed tomography (XCS-CT) technique for studying this fundamental relationship. XCS-CT can image light elements that do not usually exhibit strong signals using other X-ray characterization techniques. This paper describes the XCS-CT setup and data analysis method for calculating the valence electron momentum density and lithium-ion concentration, and provides two examples of spatially and temporally resolved chemical properties inside batteries in 3D. XCS-CT was applied to study two types of rechargeable lithium batteries in standard coin cell casings: (1) a lithium-ion battery containing a cathode of bespoke microstructure and liquid electrolyte, and (2) a solid-state battery containing a solid-polymer electrolyte. The XCS-CT technique is beneficial to a wide variety of materials and systems to map chemical composition changes in 3D structures.

Evolution Path of Precursor-Induced High-Temperature Lithiation Reaction during the Synthesis of Lithium-Rich Cathode Materials

High-temperature lithiation is one of the crucial steps for the synthesis of Li- and Mn-rich layered metal oxide (LMLO) cathodes. A profound insight of the micromorphology and crystal structure evolution during calcination helps to realize the finely controlled preparation of final cathodes, finally achieving a desired electrochemical performance. In this work, two typical precursors (hydroxide and oxalate) were selected to prepare LMLO. It is found that the influence of the lithium source on reaction pathways is determined by the properties of precursors. In the case of hydroxide as a precursor, whatever lithium sources it is, the flake morphology of LMLO is inherited from hydroxide precursors. This is because the crystal structure of cathode products has a high similarity with its precursor in terms of the oxygen array arrangement, and the topological transformation occurs from hydroxide (P-3ml) to LMLOs (C/2m and R3m). Thus, the morphology and microstructure of LMLO cathodes could be well controlled only by tuning the properties of hydroxide precursors. Conversely, the decomposition of a lithium source has a great influence on the intermediate transformation when oxalate is used as the precursor. This is because a large amount of CO2 is released from the oxalate precursor after the decomposition reaction, resulting in drastic structural changes. At this time, the diffusion ability of the lithium source leads to the competition between the spinel phase and layered phase. Based on this point, the formation of a spinel intermediate phase can be reduced by accelerating the decomposition of the lithium source, contributing to the generation of a highly pure layered phase, thus exhibiting higher electrochemical performance. These insights provide an exciting cue to the rational selection and design of raw materials and lithium sources for the controlled synthesis of LMLO cathodes.

From Liquid to Solid-State Batteries: Li-Rich Mn-Based Layered Oxides as Emerging Cathodes with High Energy Density

Li-rich Mn-based (LRMO) cathode materials have attracted widespread attention due to their high specific capacity, energy density, and cost-effectiveness. However, challenges such as poor cycling stability, voltage deca,y and oxygen escape limit their commercial application in liquid Li-ion batteries. Consequently, there is a growing interest in the development of safe and resilient all-solid-state batteries (ASSBs), driven by their remarkable safety features and superior energy density. ASSBs based on LRMO cathodes offer distinct advantages over conventional liquid Li-ion batteries, including long-term cycle stability, thermal and wider electrochemical windows stability, as well as the prevention of transition metal dissolution. This review aims to recapitulate the challenges and fundamental understanding associated with the application of LRMO cathodes in ASSBs. Additionally, it proposes the mechanisms of interfacial mechanical and chemical instability, introduces noteworthy strategies to enhance oxygen redox reversibility, enhances high-voltage interfacial stability, and optimizes Li+ transfer kinetics. Furthermore, it suggests potential research approaches to facilitate the large-scale implementation of LRMO cathodes in ASSBs.

Design Principles and Mechanistic Understandings of Non-Noble-Metal Bifunctional Electrocatalysts for Zinc-Air Batteries

Zinc-air batteries (ZABs) are promising energy storage systems because of high theoretical energy density, safety, low cost, and abundance of zinc. However, the slow multi-step reaction of oxygen and heavy reliance on noble-metal catalysts hinder the practical applications of ZABs. Therefore, feasible and advanced non-noble-metal electrocatalysts for air cathodes need to be identified to promote the oxygen catalytic reaction. In this review, we initially introduced the advancement of ZABs in the past two decades and provided an overview of key developments in this field. Then, we discussed the working mechanism and the design of bifunctional electrocatalysts from the perspective of morphology design, crystal structure tuning, interface strategy, and atomic engineering. We also included theoretical studies, machine learning, and advanced characterization technologies to provide a comprehensive understanding of the structure-performance relationship of electrocatalysts and the reaction pathways of the oxygen redox reactions. Finally, we discussed the challenges and prospects related to designing advanced non-noble-metal bifunctional electrocatalysts for ZABs.

The Case for a Defect Genome Initiative

The Materials Genome Initiative (MGI) has streamlined the materials discovery effort by leveraging generic traits of materials, with focus largely on perfect solids. Defects such as impurities and perturbations, however, drive many attractive functional properties of materials. The rich tapestry of charge, spin, and bonding states hosted by defects are not accessible to elements and perfect crystals, and defects can thus be viewed as another class of "elements" that lie beyond the periodic table. Accordingly, a Defect Genome Initiative (DGI) to accelerate functional defect discovery for energy, quantum information, and other applications is proposed. First, major advances made under the MGI are highlighted, followed by a delineation of pathways for accelerating the discovery and design of functional defects under the DGI. Near-term goals for the DGI are suggested. The construction of open defect platforms and design of data-driven functional defects, along with approaches for fabrication and characterization of defects, are discussed. The associated challenges and opportunities are considered and recent advances towards controlled introduction of functional defects at the atomic scale are reviewed. It is hoped this perspective will spur a community-wide interest in undertaking a DGI effort in recognition of the importance of defects in enabling unique functionalities in materials.

Toward three-dimensionally ordered nanoporous graphene materials: template synthesis, structure, and applications

Precise template synthesis will realize three-dimensionally ordered nanoporous graphenes (NPGs) with a spatially controlled seamless graphene structure and fewer edges. These structural features result in superelastic nature, high electrochemical stability, high electrical conductivity, and fast diffusion of gases and ions at the same time. Such innovative 3D graphene materials are conducive to solving energy-related issues for a better future. To further improve the attractive properties of NPGs, we review the template synthesis and its mechanism by chemical vapor deposition of hydrocarbons, analysis of the nanoporous graphene structure, and applications in electrochemical and mechanical devices.

Realising higher capacity and stability for disordered rocksalt oxyfluoride cathode materials for Li ion batteries

Disordered rocksalt (DRX) materials are an emerging class of cathode materials for Li ion batteries. Their advantages include better sustainability through wider choices of transition metal (TM) elements in the materials and higher theoretical capacities due to the redox reaction contributions from both the TM and O elements compared with state-of-the-art cathode materials. However, the realisable capacities of the DRX materials need to be improved as their charge transport kinetics and cycling stability are still poor. Here, Li1.2Mn0.4Ti0.4O2 (LMTO) and Li1.3Mn0.4Ti0.3O1.7F0.3 (LMTOF) are synthesised with abundant TMs of Mn and Ti only. Three approaches of partial substitution of O with F, reducing particle size and C coating on the particle surface are used simultaneously to improve realisable capacity, rate capability and stability. We rationalise that the improved electrochemical performance is due to the improved short and long range Li+ diffusion kinetics, electrical conductivity and reduced O loss. These strategies can also be applicable to a variety of DRX materials to improve performance.

A Mechanistic Insight into the Oxygen Redox of Li-Rich Layered Cathodes and their Related Electronic/Atomic Behaviors Upon Cycling

Li-rich cathodes are extensively investigated as their energy density is superior to Li stoichiometric cathode materials. In addition to the transition metal redox, this intriguing electrochemical performance originates from the redox reaction of the anionic sublattice. This new redox process, the so-called anionic redox or, more directly, oxygen redox in the case of oxides, almost doubles the energy density of Li-rich cathodes compared to conventional cathodes. Numerous theoretical and experimental investigations have thoroughly established the current understanding of the oxygen redox of Li-rich cathodes. However, different reports are occasionally contradictory, indicating that current knowledge remains incomplete. Moreover, several practical issues still hinder the real-world application of Li-rich cathodes. As these issues are related to phenomena resulting from the electronic to atomic evolution induced by unstable oxygen redox, a fundamental multiscale understanding is essential for solving the problem. In this review, the current mechanistic understanding of oxygen redox, the origin of the practical problems, and how current studies tackle the issues are summarized.

Temperature-Driven Anisotropic Mg2+ Doping for a Pillared LiCoO2 Interlayer Surface in High-Voltage Applications

High-voltage lithium cobalt oxide (LiCoO₂) has the highest volumetric energy density among commercial cathode materials in lithium-ion batteries due to its high working voltage and compacted density. However, under high voltage (4.6 V), the capacity of LiCoO₂ fades rapidly due to parasitic reactions of high-valent cobalt with the electrolyte and the loss of lattice oxygen at the interface. In this study, we report a temperature-driven anisotropic doping phenomenon of Mg²⁺ that results in surface-populated Mg²⁺ doping to the side of the (003) plane of LiCoO₂. Mg²⁺ dopants enter the Li⁺ sites, lower the valence state of Co ions with less hybridization between the O 2p and Co 3d orbitals, promote the formation of surface Li⁺/Co²⁺ anti-sites, and suppress lattice oxygen loss on the surface. As a result, the modified LiCoO₂ demonstrates excellent cycling performance under 4.6 V, reaching an energy density of 911.2 Wh/kg at 0.1C and retaining 92.7% (184.3 mAh g^-1) of its capacity after 100 cycles at 1C. Our results highlight a promising avenue for enhancing the electrochemical performance of LiCoO₂ by anisotropic surface doping with Mg²⁺.

The Importance of Structural Uniformity and Chemical Homogeneity in Cobalt-Free Lithium Excess Nickel Manganese Oxide Cathodes

This study explores the relationships between material quench rate during processing and the resulting structural and electrochemical properties of Li[Ni_0.25 Li_0.167 Mn_0.583 ]O₂ . Samples of this lithium-rich material are prepared with highly contrasting postfiring cooling methods: a rapid water emersion quench or closed-door oven cooling. The contrasting approaches result in samples with different structural, chemical, and electrochemical behaviors; after cycling the rapidly quenched material yields greater capacity, greater stability, and initially lower, but more stable voltages than the slower cooled samples. Through the use of scanning tunneling electron microscopy, X-Ray Diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) it is demonstrated that rapidly quenched powders are more structurally uniform and chemically homogenous before cycling. By comparing these precycling sample to postcycling samples, it is then examined how this increased structural uniformity and chemical homogeneity leads to the superior electrochemical properties of the rapidly quenched samples.

Regulation of Interfacial Lattice Oxygen Activity by Full-Surface Modification Engineering towards Long Cycling Stability for Co-Free Li-Rich Mn-Based Cathode

The construction of a protective layer for stabilizing anion redox reaction is the key to obtaining long cycling stability for Li-rich Mn-based cathode materials. However, the protection of the exposed surface/interface of the primary particles inside the secondary particles is usually ignored and difficult, let alone the investigation of the impact of the surface engineering of the internal primary particles on the cycling stability. In this work, an efficient method to regulate cycling stability is proposed by simply adjusting the distribution state of the boron nickel complexes coating layer. Theoretical calculation and experimental results display that the full-surface boron nickel complexes coating layer can not only passivate the activity of interface oxygen and improve its stability but also play the role of sharing voltage and protective layer to gradually activate the oxygen redox reaction during cycling. As a result, the elaborately designed cobalt-free Li-rich Mn-based cathode displays the highest discharge-specific capacity retentions of 91.1% after 400 cycles at 1 C and 94.3% even after 800 cycles at 5 C. In particular, the regulation strategy has well universality and is suitable for other high-capacity Li-rich cathode materials.

Quantum view of Li-ion high mobility at carbon-coated cathode interfaces

Lithium-ion batteries (LIBs) are among the most promising power sources for electric vehicles, portable electronics and smart grids. In LIBs, the cathode is a major bottleneck, with a particular reference to its low electrical conductivity and Li-ion diffusivity. The coating with carbon layers is generally employed to enhance the electrical conductivity and to protect the active material from degradation during operation. Here, we demonstrate that this layer has a primary role in the lithium diffusivity into the cathode nanoparticles. Positron is a useful quantum probe at the electroactive materials/carbon interface to sense the mobility of Li-ion. Broadband electrical spectroscopy demonstrates that only a small number of Li-ions are moving, and that their diffusion strongly depends on the type of carbon additive. Positron annihilation and broadband electrical spectroscopies are crucial complementary tools to investigate the electronic effect of the carbon phase on the cathode performance and Li-ion dynamics in electroactive materials.

High-resolution Compton spectroscopy using x-ray microcalorimeters

X-ray Compton spectroscopy is one of the few direct probes of the electron momentum distribution of bulk materials in ambient and operando environments. We report high-resolution inelastic x-ray scattering experiments with high momentum and energy transfer performed at a storage-ring-based high-energy x-ray light source facility using an x-ray transition-edge sensor (TES) microcalorimeter detector. The performance was compared with a silicon drift detector (SDD), an energy-resolving semiconductor detector, and Compton profiles were measured for lithium and cobalt oxide powders relevant to lithium-ion battery research. Spectroscopic analysis of the measured Compton profiles demonstrates the high-sensitivity to the low-Z elements and oxidation states. The line shape analysis of the measured Compton profiles in comparison with computed Hartree-Fock profiles is usually limited by the resolution of the semiconductor detector. We have characterized an x-ray TES microcalorimeter detector for high-resolution Compton scattering experiments using a bending magnet source at the Advanced Photon Source with a double crystal monochromator, providing monochromatic photon energies near 27.5 keV. The momentum resolution below 0.16 atomic units (a.u.) was measured, yielding an improvement of more than a factor of 7 over a state-of-the-art SDD for the same scattering geometry. Furthermore, the lineshapes of narrow valence and broad core electron profiles of sealed lithium metal were clearly resolved using an x-ray TES compared to smeared and broadened lineshapes observed when using the SDD. High-resolution Compton scattering using the energy-resolving area detector shown here presents new opportunities for spatial imaging of electron momentum distributions for a wide class of materials with applications ranging from electrochemistry to condensed matter physics.

Structure/Interface Coupling Effect for High-Voltage LiCoO2 Cathodes

LiCoO₂ (LCO) is widely applied in today's rechargeable battery markets for consumer electronic devices. However, LCO operations at high voltage are hindered by accelerated structure degradation and electrode/electrolyte interface decomposition. To overcome these challenges, co-modified LCO (defined as CB-Mg-LCO) that couples pillar structures with interface shielding are successfully synthesized for achieving high-energy-density and structurally stable cathode material. Benefitting from the "Mg-pillar" effect, irreversible phase transitions are significantly suppressed and highly reversible Li⁺ shuttling is enabled. Interestingly, bonding effects between the interfacial lattice oxygen of CB-Mg-LCO and amorphous Co_x B_y coating layer are found to elevate the formation energy of oxygen vacancies, thereby considerably mitigating lattice oxygen loss and inhibiting irreversible phase transformation. Meanwhile, interface shielding effects are also beneficial for mitigating parasitic electrode/electrolyte reactions, subsequent Co dissolution, and ultimately enable a robust electrode/electrolyte interface. As a result, the as-designed CB-Mg-LCO cathode achieves a high capacity and excellent cycle stability with 94.6% capacity retention at an extremely high cut-off voltage of 4.6 V. These findings provide new insights for cathode material modification methods, which serves to guide future cathode material design.

LiMn2O4 cathodes with F anion doping for superior performance of lithium-ion batteries

Although considered as promising candidates for lithium-ion secondary batteries, spinel LiMn₂O₄ cathodes suffer from significant capacity decay owing to the Jahn-Teller effect, dissolution of Mn and lattice oxygen loss during the charge/discharge process, preventing their wider use. In this work, we realize that F-doping at small concentrations could improve the battery voltage and reduce the capacity decay using an atomistic model. For voltage, F-doping improves the voltage to about 4.4 eV under large delithiation. For capacity decay, it retards capacity decay owing to the reduced lattice oxygen loss. The larger Gibbs free energy of oxygen release after F-doping indicates harder lattice oxygen loss. In addition, although F-doping makes the average valence of Mn lower, the existence of Mn⁴⁺ during delithiation exerts a positive effect by reducing the Jahn-Teller effect. However, since the Mn³⁺ ions in the spinel structure could induce Jahn-Teller distortion, the effect of F-doping on Jahn-Teller distortion is determined by the competition between Mn⁴⁺ and Mn³⁺. The atomistic mechanism of F-doping in the performance of LiMn₂O₄ offers new insight in developing spinel lithium manganese oxide cathode materials with superior performance.

Unexpectedly Large Contribution of Oxygen to Charge Compensation Triggered by Structural Disordering: Detailed Experimental and Theoretical Study on a Li3NbO4-NiO Binary System

Dependence on lithium-ion batteries for automobile applications is rapidly increasing. The emerging use of anionic redox can boost the energy density of batteries, but the fundamental origin of anionic redox is still under debate. Moreover, to realize anionic redox, many reported electrode materials rely on manganese ions through π-type interactions with oxygen. Here, through a systematic experimental and theoretical study on a binary system of Li₃NbO₄-NiO, we demonstrate for the first time the unexpectedly large contribution of oxygen to charge compensation for electrochemical oxidation in Ni-based materials. In general, for Ni-based materials, e.g., LiNiO₂, charge compensation is achieved mainly by Ni oxidation, with a lower contribution from oxygen. In contrast, for Li₃NbO₄-NiO, oxygen-based charge compensation is triggered by structural disordering and σ-type interactions with nickel ions, which are associated with a unique environment for oxygen, i.e., a linear Ni-O-Ni configuration in the disordered system. Reversible anionic redox with a small hysteretic behavior was achieved for LiNi_2/3Nb_1/3O₂ with a cation-disordered Li/Ni arrangement. Further Li enrichment in the structure destabilizes anionic redox and leads to irreversible oxygen loss due to the disappearance of the linear Ni-O-Ni configuration and the formation of unstable Ni ions with high oxidation states. On the basis of these results, we discuss the possibility of using σ-type interactions for anionic redox to design advanced electrode materials for high-energy lithium-ion batteries.

Non-Destructive Analysis of a High-Power Capacitor Using High-Energy X-ray Compton Scattering

Changes in the internal state of a high-power capacitor during progressive charge–discharge cycling were measured non-destructively using high-energy synchrotron X-ray Compton scattering. The stacked structure of a laminated capacitor was clearly indicated by a Compton scattered X-ray intensity analysis and a line shape (S-parameter) analysis of a Compton scattered X-ray energy spectrum. Moreover, apparent differences in the progress of charge and discharge cycles were observed in the correlation between Compton scattered X-ray intensities and S-parameters obtained from the center and edge positions within the in-plane of the electrode. This difference in the correlation was obtained from the shifting of the stacked structure at the edge position, induced by the drift of the electrolyte material within the capacitor cells.

Enhanced Electrochemical Performance and Safety of LiNi0.88Co0.1Al0.02O2 by a Negative Thermal Expansion Material of Orthorhombic Al2(WO4)3

LiNi0.88Co0.1Al0.02O2 (NCA) is attractive for high-energy batteries, but phase transition and side reactions leave large volume change and thermal runaway. In order to address the drawbacks, orthorhombic Al2(WO4)3, a cheap anisotropic negative thermal expansion material, was synthesized and adopted to modify NCA, and its effects on the electrochemical performance and safety of NCA were investigated using multifarious techniques. Al2(WO4)3 can greatly improve the rate performance, cyclability at different temperatures, thermal stability, and interface behavior and intensify charge transfer as well as decline the deformation and side reactions of NCA. The discharge capacity of the NCA modified with 5 wt % Al2(WO4)3 reaches 170.0 mA h/g at 5.0 C and 25 °C. After 100 cycles, the values of this electrode at 1.0 C and 25 °C and at 3.0 C and 60 °C are 164.2 and 148.7 mA h/g, respectively, much higher than those of the pure NCA under the same conditions. Moreover, Al2(WO4)3 declines the byproducts and cation mixing and decreases the released heat, strain, and charge-transfer resistance after cycles of NCA about 37.1, 33.0, and 32.8%, respectively. The improvement mechanism is discussed. It opens an effective avenue for the applications of energy materials by simultaneously adjusting heat, structure, interface, and deformation.

Magnetic Compton Scattering Study of Li-Rich Battery Materials

The redox process in a lithium-ion battery occurs when a conduction electron from the lithium anode is transferred to the redox orbital of the cathode. Understanding the nature of orbitals involved in anionic as well as cationic redox reactions is important for improving the capacity and energy density of Li-ion batteries. In this connection, we have obtained magnetic Compton profiles (MCPs) from the Li-rich cation-disordered rock-salt compound LixTi0.4Mn0.4O2 (LTMO). The MCPs, which involved the scattering of circularly polarized hard X-rays, are given by the momentum density of all the unpaired spins in the material. The net magnetic moment in the ground state can be extracted from the area under the MCP, along with a SQUID measurement. Our analysis gives insight into the role of Mn 3d magnetic electrons and O 2p holes in the magnetic redox properties of LTMO.

Understanding charge storage in Nb2CTx MXene as an anode material for lithium ion batteries

MXenes represent an emerging family of two-dimensional materials of transition metal carbides/carbonitrides terminated with functional groups like -O, -OH, and -F on the chemically active surface of MX slabs. As a member of the family, Nb₂CT_x exhibits superior lithium storage capacity over most of the other MXenes as anode materials in lithium-ion batteries (LIBs). However, an in-depth understanding of the charge storage mechanism is still lacking so far. Here, through combining complementary experiments and density functional theory calculations, we provide insights into the (de)lithiation process. Specifically, Nb₂CT_x with dominant -O functional groups stores charge as a result of changes in the oxidation states of both transition metals Nb and O, which is supported by Bader charge analysis showing a significant change in the oxidation states of Nb and O upon lithiation. As monitored by ex situ X-ray diffraction, the interlayer spacing of Nb₂CT_x changes slightly upon lithium ion (de)intercalation, corresponding to a volume change of only 2.3% with a near zero-strain feature. By coupling with a LiFePO₄/C cathode, the full cell presents superior rate capability and cycling stability as well. The insights into the charge storage mechanism of Nb₂CT_x in this work provide useful guidance for the rational design of MXene-based anode materials for high-performance LIBs.

Tailoring Co3d and O2p Band Centers to Inhibit Oxygen Escape for Stable 4.6 V LiCoO2 Cathodes

High-voltage LiCoO₂ delivers a high capacity but sharp fading is a critical issue, and the capacity decay mechanism is also poorly understood. Herein, we clarify that the escape of surface oxygen and Li-insulator Co₃ O₄ formation are the main causes for the capacity fading of 4.6 V LiCoO₂ . We propose the inhibition of the oxygen escape for achieving stable 4.6 V LiCoO₂ by tailoring the Co3d and O2p band center and enlarging their band gap with MgF₂ doping. This enhances the ionicity of the Co-O bond and the redox activity of Co and improves cation migration reversibility. The inhibition of oxygen escape suppresses the formation of Li-insulator Co₃ O₄ and maintains the surface structure integrity. Mg acts as a pillar, providing a stable and enlarged channel for fast Li⁺ intercalation/extraction. The modulated LiCoO₂ shows almost zero strain and achieves a record capacity retention at 4.6 V: 92 % after 100 cycles at 1C and 86.4 % after 1000 cycles at 5C.

Study of Rechargeable Batteries Using Advanced Spectroscopic and Computational Techniques

Improving the efficiency and longevity of energy storage systems based on Li- and Na-ion rechargeable batteries presents a major challenge. The main problems are essentially capacity loss and limited cyclability. These effects are due to a hierarchy of factors spanning various length and time scales, interconnected in a complex manner. As a consequence, and in spite of several decades of research, a proper understanding of the ageing process has remained somewhat elusive. In recent years, however, combinations of advanced spectroscopy techniques and first-principles simulations have been applied with success to tackle this problem. In this Special Issue, we are pleased to present a selection of articles that, by precisely applying these methods, unravel key aspects of the reduction–oxidation reaction and intercalation processes. Furthermore, the approaches presented provide improvements to standard diagnostic and characterisation techniques, enabling the detection of possible Li-ion flow bottlenecks causing the degradation of capacity and cyclability.