Water splitting with silicon p-i-n superlattices suspended in solution

Confined growth of Ultrathin, nanometer-sized FeOOH/CoP heterojunction nanosheet arrays as efficient self-supported electrode for oxygen evolution reaction

Self-supported electrodes, featuring abundant active species and rapid mass transfer, are promising for practical applications in water electrolysis. However, constructing efficient self-supported electrodes with a strong affinity between the catalytic components and the substrate is of great challenge. In this study, by combining the ideas of in-situ construction and space-confined growth, we designed a novel self-supported FeOOH/cobalt phosphide (CoP) heterojunctions grown on a carefully modified commercial Ni foam (NF) with three-dimensional (3D) hierarchically porous Ni skeleton (FeOOH/CoP/3D NF). The specific porous structure of 3D NF directs the confined growth of FeOOH/CoP catalyst into ultra-thin and small-sized nanosheet arrays with abundant edge active sites. The active FeOOH/CoP component is stably anchored on the rough pore wall of 3D NF support, leading to superior stability and improved conductivity. These structural advantages contributed to a highly facilitated oxygen evolution reaction (OER) activity and enhanced durability of the FeOOH/CoP/3D NF electrode. Herein, the FeOOH/CoP/3D NF electrode afforded a low overpotential of 234 mV at 10 mA cm-2 (41 mV smaller than FeOOH/CoP grown on unmodified Ni foam) and high stability for over 90 h, which is among the top reported OER catalysts. Our study provides an effective idea and technique for the construction of active and robust self-supported electrodes for water electrolysis.

Interfacial-Assembly-Induced In Situ Transformation from Aligned 1D Nanowires to Quasi-2D Nanofilms

As the dimensionality of materials generally affects their characteristics, thin films composed of low-dimensional nanomaterials, such as nanowires (NWs) or nanoplates, are of great importance in modern engineering. Among various bottom-up film fabrication strategies, interfacial assembly of nanoscale building blocks holds great promise in constructing large-scale aligned thin films, leading to emergent or enhanced collective properties compared to individual building blocks. As for 1D nanostructures, the interfacial self-assembly causes the morphology orientation, effectively achieving anisotropic electrical, thermal, and optical conduction. However, issues such as defects between each nanoscale building block, crystal orientation, and homogeneity constrain the application of ordered films. The precise control of transdimensional synthesis and the formation mechanism from 1D to 2D are rarely reported. To meet this gap, we introduce an interfacial-assembly-induced interfacial synthesis strategy and successfully synthesize quasi-2D nanofilms via the oriented attachment of 1D NWs on the liquid interface. Theoretical sampling and simulation show that NWs on the liquid interface maintain their lowest interaction energy for the ordered crystal plane (110) orientation and then rearrange and attach to the quasi-2D nanofilm. This quasi-2D nanofilm shows enhanced electric conductivity and unique optical properties compared with its corresponding 1D geometry materials. Uncovering these growth pathways of the 1D-to-2D transition provides opportunities for future material design and synthesis at the interface.

Silicon photocathode functionalized with osmium complex catalyst for selective catalytic conversion of CO2 to methane

Solar-driven CO2 reduction to yield high-value chemicals presents an appealing avenue for combating climate change, yet achieving selective production of specific products remains a significant challenge. We showcase two osmium complexes, przpOs, and trzpOs, as CO2 reduction catalysts for selective CO2-to-methane conversion. Kinetically, the przpOs and trzpOs exhibit high CO2 reduction catalytic rate constants of 0.544 and 6.41 s-1, respectively. Under AM1.5 G irradiation, the optimal Si/TiO2/trzpOs have CH4 as the main product and >90% Faradaic efficiency, reaching -14.11 mA cm-2 photocurrent density at 0.0 VRHE. Density functional theory calculations reveal that the N atoms on the bipyrazole and triazole ligands effectively stabilize the CO2-adduct intermediates, which tend to be further hydrogenated to produce CH4, leading to their ultrahigh CO2-to-CH4 selectivity. These results are comparable to cutting-edge Si-based photocathodes for CO2 reduction, revealing a vast research potential in employing molecular catalysts for the photoelectrochemical conversion of CO2 to methane.

Amorphous P-CoOX Promotes the Formation of Hypervalent Ni Species in NiFe LDHs by Amorphous/Crystalline Interfaces for Excellent Catalytic Performance of Oxygen Evolution Reaction

Water electrolysis has become an attractive hydrogen production method. Oxygen evolution reaction (OER) is a bottleneck of water splitting as its four-electron transfer procedure presents sluggish reaction kinetics. Designing composite catalysts with high performance for efficient OER still remains a huge challenge. Here, the P-doped cobalt oxide/NiFe layered double hydroxides (P-CoOX/NiFe LDHs) composite catalysts with amorphous/crystalline interfaces are successfully prepared for OER by hydrothermal-electrodeposition combined method. The results of electrochemical characterizations, operando Raman spectra, and DFT theoretical calculations have demonstrated the electrons in the P-CoOX/NiFe LDHs heterointerfaces are easily transferred from Ni2+ to Co3+ because that the amorphous configuration of P-CoOX can well induce Ni-O-Co orbital coupling. The electron transfer of Ni2+ to the surrounding Fe3+ and Co3+ will lead to the unoccupied eg orbitals of Ni3+ that can promote water dissociation and accelerate *OOH migration to improve OER catalytic performance. The optimized P-CoOX/NiFe LDHs exhibit superior catalytic performance for OER with a very low overpotential of 265 mV at 300 mA cm-2 and excellent long-term stability of 500 h with almost no attenuation at 100 mA cm-2. This work will provide a new method to design high-performance NiFe LDHs-based catalysts for OER.

Molecular Ratchets and Kinetic Asymmetry: Giving Chemistry Direction

Over the last two decades ratchet mechanisms have transformed the understanding and design of stochastic molecular systems-biological, chemical and physical-in a move away from the mechanical macroscopic analogies that dominated thinking regarding molecular dynamics in the 1990s and early 2000s (e.g. pistons, springs, etc), to the more scale-relevant concepts that underpin out-of-equilibrium research in the molecular sciences today. Ratcheting has established molecular nanotechnology as a research frontier for energy transduction and metabolism, and has enabled the reverse engineering of biomolecular machinery, delivering insights into how molecules 'walk' and track-based synthesisers operate, how the acceleration of chemical reactions enables energy to be transduced by catalysts (both motor proteins and synthetic catalysts), and how dynamic systems can be driven away from equilibrium through catalysis. The recognition of molecular ratchet mechanisms in biology, and their invention in synthetic systems, is proving significant in areas as diverse as supramolecular chemistry, systems chemistry, dynamic covalent chemistry, DNA nanotechnology, polymer and materials science, molecular biology, heterogeneous catalysis, endergonic synthesis, the origin of life, and many other branches of chemical science. Put simply, ratchet mechanisms give chemistry direction. Kinetic asymmetry, the key feature of ratcheting, is the dynamic counterpart of structural asymmetry (i.e. chirality). Given the ubiquity of ratchet mechanisms in endergonic chemical processes in biology, and their significance for behaviour and function from systems to synthesis, it is surely just as fundamentally important. This Review charts the recognition, invention and development of molecular ratchets, focussing particularly on the role for which they were originally envisaged in chemistry, as design elements for molecular machinery. Different kinetically asymmetric systems are compared, and the consequences of their dynamic behaviour discussed. These archetypal examples demonstrate how chemical systems can be driven inexorably away from equilibrium, rather than relax towards it.

Piezoelectric Materials and Pyroelectric Materials:High Efficient Catalysts for Photoelectrochemical Water Splitting

Directly transforming solar energy into chemical compounds via photocatalytic water splitting can continually producing hydrogen, regarded as one of the ultimate sustainable energy sources. The key point of achieving high photoelectrochemical (PEC) water splitting performance depends on the successful design and synthesis of high-efficient photocatalysts. However, the slow separation and fast recombination of photo generated charge carriers greatly limit the utilization of solar energy, resulting in low PEC water splitting efficiency. Recently, piezoelectric/pyroelectric effect assisted PEC water splitting brings new sight on improving charger separate and transfer behaviors. In this review, the recent advancements and state-of-the-art progress in piezoelectric/pyroelectric effect assisted PEC water splitting are summarized and discussed. Different types of photocatalysts are classified according to their chemical constitutions and the corresponding advantages of each type are also discussed. Furthermore, the progress of coupling piezoelectric effect and pyroelectric effect in one PEC water splitting system is also introduced. Finally, the prospects, critical challenges and promising strategies for the application of piezoelectric/pyroelectric materials in PEC water splitting are highlighted.

Bias distribution and regulation in photoelectrochemical overall water-splitting cells

The water oxidation half-reaction at anodes is always considered the rate-limiting step of overall water splitting (OWS), but the actual bias distribution between photoanodes and cathodes of photoelectrochemical (PEC) OWS cells has not been investigated systematically. In this work, we find that, for PEC cells consisting of photoanodes (nickel-modified n-Si [Ni/n-Si] and α-Fe2O3) with low photovoltage (Vph < 1 V), a large portion of applied bias is exerted on the Pt cathode for satisfying the hydrogen evolution thermodynamics, showing a thermodynamics-controlled characteristic. In contrast, for photoanodes (TiO2 and BiVO4) with Vph > 1 V, the bias required for cathode activation can be significantly reduced, exhibiting a kinetics-controlled characteristic. Further investigations show that the bias distribution can be regulated by tuning the electrolyte pH and using alternative half-reaction couplings. Accordingly, a volcano plot is presented for the rational design of the overall reactions and unbiased PEC cells. Motivated by this, an unbiased PEC cell consisting of a simple Ni/n-Si photoanode and Pt cathode is assembled, delivering a photocurrent density of 5.3 ± 0.2 mA cm-2.

Chemovoltaic effect for renewable liquid and vapor fuels on semiconductor surfaces

The chemovoltaic effect - generation of electronic excitation by exergonic redox reactions - has been observed on metallic surfaces of Schottky junctions and is proving to be pivotal in explaining in detail the momentum conservation relations of chemically active collisions. As shown in this work, it can hold keys for direct chemical energy harvesting by semiconductor solar cells. To study the possibilities of chemovoltaic energy conversion by semiconductors, we have modeled and designed an 'electrolyte-free fuel cell' formed by a GaAs diode that can host electrochemical fuel oxidation and oxidant reduction reactions on its conduction and valence bands and as a result convert renewable chemical energy (as well as light) into electricity. The experimental results show that exposing the surface of a suitably designed solar cell to methanol liquid or vapor in the presence of oxygen or hydrogen peroxide leads to the generation of electrical power.

Photoreduction of Aqueous Protons Coupling with Alcohol Oxidation on a S-Scheme Heterojunction Photocatalyst MnO/Carbon Nitride

Crystalline carbon nitride (CCN), derived from amorphous polymeric CN, is considered as a new generation of metal-free photocatalyst because of its high crystallinity. In order to further promote the photocatalytic performance of CCN, p-type MnO nanoparticles are in situ synthesized and merged with n-type CCN through a one-pot process to form p-n heterojunction. The formed interfacial electric field between the semiconductors with different work functions efficiently breaks the coulomb interaction between MnO and CCN. The prepared catalysts exhibit drastically increased photocatalytic hydrogen evolution (PHE) activity integrated with oxidation of alkyl and aryl alcohols under irradiation of visible light. In the aqueous solution of benzyl alcohol (BzOH), the hydrogen generation rate over MnO/CCN (39.58 µmol h-1) is nearly 7 times and 37 times that of pure CCN (5.76 µmol h-1) and CN (1.06 µmol h-1), respectively, combining with oxidation of BzOH to benzaldehyde. This work proposes an avenue for in situ construction of a novel 2D material-based S-scheme heterojunction and extends its application in solar energy conservation and utilization.

Ferro/Nonferroelectric Vertical Heterostructure Superlattice as a Visible-Light-Responsive Photocatalyst: A DFT Prediction

Developing narrow-band-gap ferroelectric semiconducting photocatalysts is a promising strategy for efficient photocatalytic water splitting with high energy conversion efficiency. Within this context, six ferro/nonferroelectric vertical heterostructure superlattices (VHSs) are constructed in this work by stacking ferroelectric SiS or GeS with nonferroelectric layered organic photocatalysts (C2N, g-C3N4, and melon), layer by layer. The geometry and electronic structures of these six VHSs are systematically investigated by density functional theory calculations. Consequently, four VHSs (SiS/g-C3N4, GeS/C2N, GeS/g-C3N4, and GeS/melon) are predicted to simultaneously possess several important and highly desirable features for photocatalytic water splitting, namely excellent visible-light adsorption, remarkable spontaneous polarization (0.49-0.70 C/m2), spatial charge separation, as well as suitable band-edge positions, thus serving as potential candidates for photocatalytic water splitting to produce hydrogen. This work not only provides a new strategy to use narrow-band-gap ferroelectric semiconductors for photocatalytic water splitting but also offers inspiration for developing photocatalysts with high energy conversion efficiency.

Ratcheting synthesis

Synthetic chemistry has traditionally relied on reactions between reactants of high chemical potential and transformations that proceed energetically downhill to either a global or local minimum (thermodynamic or kinetic control). Catalysts can be used to manipulate kinetic control, lowering activation energies to influence reaction outcomes. However, such chemistry is still constrained by the shape of one-dimensional reaction coordinates. Coupling synthesis to an orthogonal energy input can allow ratcheting of chemical reaction outcomes, reminiscent of the ways that molecular machines ratchet random thermal motion to bias conformational dynamics. This fundamentally distinct approach to synthesis allows multi-dimensional potential energy surfaces to be navigated, enabling reaction outcomes that cannot be achieved under conventional kinetic or thermodynamic control. In this Review, we discuss how ratcheted synthesis is ubiquitous throughout biology and consider how chemists might harness ratchet mechanisms to accelerate catalysis, drive chemical reactions uphill and programme complex reaction sequences.

Colloid synthesis of Ni12P5/N, S-doped graphene as efficient bifunctional catalyst for alkaline hydrogen evolution and triiodide reduction reaction

Designing high-efficient bifunction catalysts with excellent catalytic activity and enhanced charge-transfer capability in both alkaline hydrogen evolution reaction (HER) and triiodide reduction reaction (IRR) is of utmost significance to advance the development of green hydrogen production and photovoltaics, respectively, yet remains a crucial challenge. Here, highly dispersed and small-sized Ni12P5 nanocrystals with narrow size distribution was well attached on the surface of N, S co-doped graphene (Ni12P5/NSG) by the facile hot-injection method. As expected, the optimized Ni12P5/NSG requires a relatively low overpotential of 132.94 ± 0.08 mV to deliver a current density of 10 mA cm-2 in alkaline condition, accompanied with remarkable long-time durability with negligible attenuation over 50 h. Density functional theory (DFT) calculations revealed that the positively synergic effect between Ni12P5 and NSG are in favor of modulating the rate determining step of the dissociation of H2O to *(OH-H), thereby upgrading its HER activity. When used as the counter electrode catalyst for IRR in DSSCs, the resultant Ni12P5/NSG exhibits extraordinary Pt-like catalytic activity and well electrochemical stability in iodide-based electrolyte, delivering a high photoelectric conversion performance (PCE) comparable to Pt. The improved PCE can be attributed to the accelerated interfacial charge-transfer capability around active sites for facilitating the reaction kinetics of IRR, as demonstrated by DFT calculations. This work provides an effective strategy for synthesizing cost-effective composites with multi-active sites and offering valuable insight into the structure-performance relationship, which is conducive to guide the synthesis of promising catalysts in the energy conversion field.

Epitaxially Grown Silicon Nanowires with a Gold Molecular Adhesion Layer for Core/Shell Structures with Compact Mie and Plasmon Resonances

Noble-metal plasmonic nanostructures have attracted much attention because they can support deep-subwavelength optical resonances, yet their performance tends to be limited by high Ohmic absorption losses. In comparison, high-index dielectric materials can support low-loss optical resonances but do not tend to yield the same subwavelength optical confinement. Here, we combine these two approaches and examine the dielectric-plasmonic resonances in dielectric/metal core/shell nanowires. Si nanowires were grown epitaxially from (111) substrates, and direct deposition of Au on these structures by physical vapor deposition yielded nonconformal Au islands. However, by introduction of a molecular adhesion layer prior to deposition, cylindrical Si/Au core/shell nanostructures with conformal metal shells were successfully fabricated. Examining these structures as optical cavities using both optical simulations and experimental extinction measurements, we found that the structures support Mie resonances with quality factors enhanced up to ∼30 times compared with pure dielectric structures and plasmon resonances with optical confinement enhanced up to ∼5 times compared with pure metallic structures. Interestingly, extinction spectra of both Mie and plasmon resonances yield Fano line shapes, whose manifestation can be attributed to the combination of high quality factor resonances, Mie-plasmon coupling, and phase delay of the background optical field. This work demonstrates a bottom-up synthetic method for the production of freestanding, cylindrically symmetric semiconductor/metal core/shell nanowires that enables the efficient trapping of light on deep-subwavelength length scales for varied applications in photonics and optoelectronics.

Remarkable heat conduction mediated by non-equilibrium phonon polaritons

Surface waves can lead to intriguing transport phenomena. In particular, surface phonon polaritons (SPhPs), which result from coupling between infrared light and optical phonons, have been predicted to contribute to heat conduction along polar thin films and nanowires1. However, experimental efforts so far suggest only very limited SPhP contributions2-5. Through systematic measurements of thermal transport along the same 3C-SiC nanowires with and without a gold coating on the end(s) that serves to launch SPhPs, here we show that thermally excited SPhPs can substantially enhance the thermal conductivity of the uncoated portion of these wires. The extracted pre-decay SPhP thermal conductance is more than two orders of magnitude higher than the Landauer limit predicted on the basis of equilibrium Bose-Einstein distributions. We attribute the notable SPhP conductance to the efficient launching of non-equilibrium SPhPs from the gold-coated portion into the uncoated SiC nanowires, which is strongly supported by the observation that the SPhP-mediated thermal conductivity is proportional to the length of the gold coating(s). The reported discoveries open the door for modulating energy transport in solids by introducing SPhPs, which can effectively counteract the classical size effect in many technologically important films and improve the design of solid-state devices.

Regulating a Zn/Co bimetallic catalyst in a metal-organic framework and oxyhydroxide for improved photoelectrochemical water oxidation

As one of the most popular photoanode materials, hematite (α-Fe2O3) has obvious advantages in the field of photoelectrochemical water splitting (PEC-WS). However, it is difficult to achieve excellent PEC-WS performance without loading a cocatalyst serving as an electron/hole collector to promote photogenerated carrier separation. In this work, FTO/Sn@α-Fe2O3 photoanodes are modified with ZnCo-ZIF and ZnCoOOH bimetallic catalysts to obtain FTO/Sn@α-Fe2O3/Zn0.5Co0.5-ZIF and FTO/Sn@α-Fe2O3/Zn0.46Co0.54OOH photoanodes. Their photocurrent densities reach 2.6 mA cm-2 and 2.3 mA cm-2 at 1.23 VRHE, respectively. The detailed mechanism studies demonstrate that both ZnCoOOH and ZnCo-ZIF can effectively decrease the transfer resistance, increase the Fe2+/Fe3+ ratio and reduce the charge recombination of the α-Fe2O3 film, which synergistically improves the PEC-WS performance. Compared with ZnCoOOH, the ZnCo-ZIF exhibits better photogenerated carrier transfer efficiency and catalytic performance, which mainly can be attributed to the improved binding energy between the ZnCo-ZIF catalyst and the α-Fe2O3 film. This work provides a simple and feasible strategy for constructing bimetallic catalysts and deepens the understanding of different types of bimetallic catalysts for high-performance PEC-WS systems.

All-Optical Electrochemiluminescence

Electrochemiluminescence (ECL) is widely employed for medical diagnosis and imaging. Despite its remarkable analytical performances, the technique remains intrinsically limited by the essential need for an external power supply and electrical wires for electrode connections. Here, we report an electrically autonomous solution leading to a paradigm change by designing a fully integrated all-optical wireless monolithic photoelectrochemical device based on a nanostructured Si photovoltaic junction modified with catalytic coatings. Under illumination with light ranging from visible to near-infrared, photogenerated holes induce the oxidation of the ECL reagents and thus the emission of visible ECL photons. The blue ECL emission is easily viewed with naked eyes and recorded with a smartphone. A new light emission scheme is thus introduced where the ECL emission energy (2.82 eV) is higher than the excitation energy (1.18 eV) via an intermediate electrochemical process. In addition, the mapping of the photoelectrochemical activity by optical microscopy reveals the minority carrier interfacial transfer mechanism at the nanoscale. This breakthrough provides an all-optical strategy for generalizing ECL without the need for electrochemical setups, electrodes, wiring constraints, and specific electrochemical knowledge. This simplest ECL configuration reported so far opens new opportunities to develop imaging and wireless bioanalytical systems such as portable point-of-care sensing devices.

Selenite-Decorated Polycrystalline NiO Nanosheets Generated from Cathodic Reconstruction for Electrocatalytic Hydrogen Production

Precatalyst reconstruction in alkaline hydrogen evolution reaction (HER) usually leads to changes in the morphology, composition, and structure, thus improving the catalytic activity, which recently receives intensive attention. However, the design strategies of cathodic reconstruction and the structural features of reconstruction products have not achieved a profound understanding. Here, from the point of thermodynamic stability, metastable nickel selenite dihydrate (NiSeO₃·2H₂O) is deliberately fabricated as a precatalyst to comprehensively study the reconstruction dynamics in alkaline HER. Multiple in/ex situ techniques capture the geometric, component, and phase evolutions, proving that NiSeO₃·2H₂O can be transformed into SeO₃^2--decorated polycrystalline NiO nanosheets with rich active sites and good conductivity under alkaline HER conditions, which act as a real catalytic active species. Density functional theory calculations demonstrate that the adsorption of SeO₃^2- can further promote the HER activity of NiO due to the optimized free energy of water activation and hydrogen adsorption. As a result, the SeO₃^2--NiO catalyst exhibits a low overpotential at -10 mA cm^-2 (90 mV) and long-term stability (>100 h). This work highlights the targeted design of precatalyst to trigger and utilize cathodic reconstruction and provides an available method for the development of adsorption-modulated efficient electrocatalysts.