The combination of three-dimensional and rotary cell culture system promotes the proliferation and maintains the differentiation potential of rat BMSCs

Tissue regeneration therapy by Nano composite scaffolds based on PLGA hydrogel embedded with human dental pulp stem cells: a systematic review

Tissue regeneration is the procedure of renewal, restoration and growth of injured tissues and defective organs including nerve, bone, tooth, cartilage and blood vessels. Repair process of damaged tissues needs non-invasive methods; so, the scientists have recently focused on alternative treatment pathways. Nano gels based on Poly Lactic-co-Glycolic Acid have been designed for different purposes in medicine. It is a biodegradable and biocompatible polymer composite. Also, human dental pulp stem cells embedded in the Poly Lactic-co-Glycolic Acid scaffold have proliferation ability and differentiation potential. They can differentiate into different cell lineages, including bone, cartilage, nerve, tooth and other tissues. So, this treatment technology can be used for tissue engineering in regenerative medicine. On the other hand, this structure is a promising application for targeted cancer therapy. Therefore, this review studied tissue, especially tooth regeneration based on the new designed Nano composite scaffolds embedded with Poly Lactic-co-Glycolic Acid hydrogel and dental pulp stem cells.

Cell Culture Model Evolution and Its Impact on Improving Therapy Efficiency in Lung Cancer

Optimizing cell culture conditions is essential to ensure experimental reproducibility. To improve the accuracy of preclinical predictions about the response of tumor cells to different classes of drugs, researchers have used 2D or 3D cell cultures in vitro to mimic the cellular processes occurring in vivo. While 2D cell culture provides valuable information on how therapeutic agents act on tumor cells, it cannot quantify how the tumor microenvironment influences the response to therapy. This review presents the necessary strategies for transitioning from 2D to 3D cell cultures, which have facilitated the rapid evolution of bioengineering techniques, leading to the development of microfluidic technology, including organ-on-chip and tumor-on-chip devices. Additionally, the study aims to highlight the impact of the advent of 3D bioprinting and microfluidic technology and their implications for improving cancer treatment and approaching personalized therapy, especially for lung cancer. Furthermore, implementing microfluidic technology in cancer studies can generate a series of challenges and future perspectives that lead to the discovery of new predictive markers or targets for antitumor treatment.

Advances in Microgravity Directed Tissue Engineering

Tissue engineering aims to generate functional biological substitutes to repair, sustain, improve, or replace tissue function affected by disease. With the rapid development of space science, the application of simulated microgravity has become an active topic in the field of tissue engineering. There is a growing body of evidence demonstrating that microgravity offers excellent advantages for tissue engineering by modulating cellular morphology, metabolism, secretion, proliferation, and stem cell differentiation. To date, there have been many achievements in constructing bioartificial spheroids, organoids, or tissue analogs with or without scaffolds in vitro under simulated microgravity conditions. Herein, the current status, recent advances, challenges, and prospects of microgravity related to tissue engineering are reviewed. Current simulated-microgravity devices and cutting-edge advances of microgravity for biomaterials-dependent or biomaterials-independent tissue engineering to offer a reference for guiding further exploration of simulated microgravity strategies to produce engineered tissues are summarized and discussed.

Three-Dimensional In Vitro Cell Culture Models for Efficient Drug Discovery: Progress So Far and Future Prospects

Despite tremendous advancements in technologies and resources, drug discovery still remains a tedious and expensive process. Though most cells are cultured using 2D monolayer cultures, due to lack of specificity, biochemical incompatibility, and cell-to-cell/matrix communications, they often lag behind in the race of modern drug discovery. There exists compelling evidence that 3D cell culture models are quite promising and advantageous in mimicking in vivo conditions. It is anticipated that these 3D cell culture methods will bridge the translation of data from 2D cell culture to animal models. Although 3D technologies have been adopted widely these days, they still have certain challenges associated with them, such as the maintenance of a micro-tissue environment similar to in vivo models and a lack of reproducibility. However, newer 3D cell culture models are able to bypass these issues to a maximum extent. This review summarizes the basic principles of 3D cell culture approaches and emphasizes different 3D techniques such as hydrogels, spheroids, microfluidic devices, organoids, and 3D bioprinting methods. Besides the progress made so far in 3D cell culture systems, the article emphasizes the various challenges associated with these models and their potential role in drug repositioning, including perspectives from the COVID-19 pandemic.

Effect of Melatonin on Psoriatic Phenotype in Human Reconstructed Skin Model

Psoriasis is an inflammatory and auto-immune skin-disease characterized by uncontrolled keratinocyte proliferation. Its pathogenesis is not still fully understood; however, an aberrant and excessive inflammatory and immune response can contribute to its progression. Recently, more attention has been given to the anti-inflammatory and immunomodulators effects of melatonin in inflammatory diseases. The aim of this paper was to investigate the effect of melatonin on psoriatic phenotype and also in S. aureus infection-associated psoriasis, with an in vitro model using Skinethic Reconstructed Human Epidermis (RHE). An in vitro model was constructed using the RHE, a three-dimensional-model obtained from human primary-keratinocytes. RHE-cells were exposed to a mix of pro-inflammatory cytokines, to induce a psoriatic phenotype; cells were also infected with S. aureus to aggravate psoriasis disease, and then were treated with melatonin at the concentrations of 1 nM, 10 nM, and 50 nM. Our results demonstrated that melatonin at higher concentrations significantly reduced histological damage, compared to the cytokine and S. aureus groups. Additionally, the treatment with melatonin restored tight-junction expression and reduced pro-inflammatory cytokine levels, such as interleukin-1β and interleukin-12. Our results suggest that melatonin could be considered a promising strategy for psoriasis-like skin inflammation, as well as complications of psoriasis, such as S. aureus infection.

May the Force Be with You (Or Not): The Immune System under Microgravity

All terrestrial organisms have evolved and adapted to thrive under Earth's gravitational force. Due to the increase of crewed space flights in recent years, it is vital to understand how the lack of gravitational forces affects organisms. It is known that astronauts who have been exposed to microgravity suffer from an array of pathological conditions including an impaired immune system, which is one of the most negatively affected by microgravity. However, at the cellular level a gap in knowledge exists, limiting our ability to understand immune impairment in space. This review highlights the most significant work done over the past 10 years detailing the effects of microgravity on cellular aspects of the immune system.

Combination of optimized tissue engineering bone implantation with heel-strike like mechanical loading to repair segmental bone defect in New Zealand rabbits

In this study, effects of combining optimized tissue engineering bone (TEB) implantation with heel-strike like mechanical loading to repair segmental bone defect in New Zealand rabbits were investigated. Physiological characteristics of bone marrow mesenchymal stem cells (BMMSCs), compact bone cells (CBCs), and bone marrow and compact bone coculture cells (BMMSC-CBCs) were compared to select the optimal seed cells for optimized TEB construction. Rabbits with segmental bone defects were treated in different ways (cancellous bone scaffold for group A, cancellous bone scaffold and mechanical loading for group B, optimized TEB for group C, optimized TEB and mechanical loading for group D, n = 4), and the bone repair were compared. BMMSC-CBCs showed better proliferation capacity than CBCs (p < 0.01) and stronger osteogenic differentiation ability than BMMSCs (p < 0.05). Heel-strike like mechanical loading improved proliferation and osteogenic differentiation ability and expression levels of TGFβ1 as well as BMP2 of seed cells in vitro (p < 0.05). At week 12 post-operation, group D showed the best bone repair, followed by groups B and C, while group A finished last (p < 0.05). During week 4 to 12 post-operation, group D peaked in terms of expression levels of TGFβ1, BMP2, and OCN, followed by groups B and C, while group A finished last (p < 0.05). Thus, BMMSC-CBCs showed good proliferation and osteogenic differentiation ability, and they were thought to be better as seed cells than BMMSCs and CBCs. The optimized TEB implantation combined with heel-strike like mechanical loading had a synergistic effect on bone defect healing, and enhanced expression of TGFβ1 and BMP2 played an important role in this process.

Molecular Beacon Imaging to Visualize Ki67 mRNA for Cell Proliferation Ability

The objective of this study is to visualize the ability of cell proliferation based on molecular beacons (MB). Two types of MB to detect messenger RNA (mRNA) were used. One is a Ki67 MB of a target for cell proliferation ability. The other one is a glyceraldehyde-3-phosphate dehydrogenase (GAPDH) MB as a control of stable fluorescence in cells. To enhance the MB internalization into cells, the MB were incorporated into cationized gelatin nanospheres (cGNS). There was no difference in the physicochemical properties and the cell internalization between the cGNS_{Ki67 MB} and cGNS_{GAP MB}. When basic fibroblast growth factor (bFGF) was added to KUM6 cells of a mouse bone marrow-derived mesenchymal stem cell line, the expression of Ki67 and the cell proliferation increased with the bFGF concentration. After the incubation for the cell internalization of cGNS incorporating MB (cGNS_MB), the cells were further incubated for 24 h with or without different concentrations of bFGF. The fluorescence of cGNS_{Ki67 MB} significantly increased with the increase of bFGF concentration, whereas that of cGNS_{GAP MB} was constant, irrespective of the bFGF concentration. A time-lapse imaging assay revealed a fast enhancement of cGNS_{Ki67 MB} fluorescence after the bFGF addition compared with no bFGF addition. On the other hand, for cGNS_{GAP MB}, a constant fluorescence was observed even at any time point after the bFGF addition. It is concluded that the cGNS_MB system is promising for the chronological visualization of proliferation ability in living cells.

Mesenchymal Stem/Progenitor Cells: The Prospect of Human Clinical Translation

Mesenchymal stem/progenitor cells (MSCs) are key players in regenerative medicine, relying principally on their differentiation/regeneration potential, immunomodulatory properties, paracrine effects, and potent homing ability with minimal if any ethical concerns. Even though multiple preclinical and clinical studies have demonstrated remarkable properties for MSCs, the clinical applicability of MSC-based therapies is still questionable. Several challenges exist that critically hinder a successful clinical translation of MSC-based therapies, including but not limited to heterogeneity of their populations, variability in their quality and quantity, donor-related factors, discrepancies in protocols for isolation, in vitro expansion and premodification, and variability in methods of cell delivery, dosing, and cell homing. Alterations of MSC viability, proliferation, properties, and/or function are also affected by various drugs and chemicals. Moreover, significant safety concerns exist due to possible teratogenic/neoplastic potential and transmission of infectious diseases. Through the current review, we aim to highlight the major challenges facing MSCs' human clinical translation and shed light on the undergoing strategies to overcome them.

Engineering and Functionalization of Gelatin Biomaterials: From Cell Culture to Medical Applications

Health care and medicine were revolutionized in recent years by the development of biomaterials, such as stents, implants, personalized drug delivery systems, engineered grafts, cell sheets, and other transplantable materials. These materials not only support the growth of cells before transplantation but also serve as replacements for damaged tissues in vivo. Among the various biomaterials available, those made from natural biological sources such as extracellular proteins (collagen, fibronectin, laminin) have shown significant benefits, and thus are widely used. However, routine biomaterial-based research requires copious quantities of proteins and the use of pure and intact extracellular proteins could be highly cost ineffective. Gelatin is a molecular derivative of collagen obtained through the irreversible denaturation of collagen proteins. Gelatin shares a very close molecular structure and function with collagen and thus is often used in cell and tissue culture to replace collagen for biomaterial purposes. Recent technological advancements such as additive manufacturing, rapid prototyping, and three-dimensional printing, in general, have resulted in great strides toward the generation of functional gelatin-based materials for medical purposes. In this review, the structural and molecular similarities of gelatin to other extracellular matrix proteins are compared and analyzed. Current strategies for gelatin crosslinking and production are described and recent applications of gelatin-based biomaterials in cell culture and tissue regeneration are discussed. Finally, recent improvements in gelatin-based biomaterials for medical applications and future directions are elaborated. Impact statement In this study, we described gelatin's biochemical properties and compared its advantages and drawbacks over other extracellular matrix proteins and polymers used for biomaterial application. We also described how gelatin can be used with other polymers in creating gelatin composite materials that have enhanced mechanical properties, increased biocompatibility, and boosted bioactivity, maximizing its benefits for biomedical purposes. The article is relevant, as it discussed not only the chemistry of gelatin, but also listed the current techniques in gelatin/biomaterial manufacturing and described the most recent trends in gelatin-based biomaterials for biomedical applications.

Characterization and immunogenicity of bone marrow-derived mesenchymal stem cells under osteoporotic conditions

Mesenchymal stem cells (MSCs) are characterized by their multilineage potential and low immunogenicity. However, the properties of MSCs under pathological conditions are unclear. The current study investigated the differentiation potential and immunological characteristics of bone marrow-derived MSCs from ovariectomized-osteoporotic rats (OP-BMSCs). Although the expression of cell morphology- and stemness-related surface markers was similar between OP-BMSCs and BMSCs from healthy rats (H-BMSCs), the proliferation rate was significantly decreased compared with that of H-BMSCs. Regarding multilineage potential, osteogenesis and chondrogenesis abilities of OP-BMSCs decreased, but the adipogenesis ability was significantly enhanced compared with that of H-BMSCs. As expected, decreased osteogenesis following osteogenic induction resulted in reduced expression of β-catenin, osteocalcin, and runt-related transcription factor 2 in OP-BMSCs. Remarkably, the expression of the co-stimulatory proteins CD40 and CD80 was significantly higher, whereas the expression of the negative co-stimulatory molecule programmed cell death ligand 1 was significantly lower in the OP-BMSCs than that in H-BMSCs. Consequently, H-BMSCs inhibited the proliferation and secretion of inflammatory cytokines from anti-CD3 antibody-activated T cells, whereas OP-BMSCs did not. These results indicate that decreased osteogenesis and increased immunogenicity of OP-BMSCs contribute to bone loss in osteoporosis.

Autologous endothelialized small-caliber vascular grafts engineered from blood-derived induced pluripotent stem cells

An ideal cell source for human therapeutic and disease modeling applications should be easily accessible and possess unlimited differentiation and expansion potential. Human induced pluripotent stem cells (hiPSCs) derived from peripheral blood mononuclear cells (PBMCs) represent a promising source given their ease of harvest and their pluripotent nature. Previous studies have demonstrated the feasibility of using PBMC-derived hiPSCs for vascular tissue engineering. However, so far, no endothelialization of hiPSC-derived tissue engineered vascular grafts (TEVGs) based on fully biodegradable polymers without xenogenic matrix components has been shown. In this study, we have generated hiPSCs from PBMCs and differentiated them into αSMA- and calponin-positive smooth muscle cells (SMCs) as well as endothelial cells (ECs) positive for CD31, vWF and eNOS. Both cell types were co-seeded on PGA-P4HB starter matrices and cultured under static or dynamic conditions to induce tissue formation in vitro. The resulting small diameter vascular grafts showed abundant amounts of extracellular matrix, containing a thin luminal layer of vWF-positive cells and a subendothelial αSMA-positive layer approximating the architecture of native vessels. Our results demonstrate the successful generation of TEVGs based on SMCs and ECs differentiated from PBMC-derived hiPSC combined with a biodegradable polymer. These results pave the way for developing autologous PBMC-derived hiPSC-based vascular constructs for therapeutic applications or disease modeling. STATEMENT OF SIGNIFICANCE: We report for the first time the possibility to employ human peripheral blood mononuclear cell (PBMC)-derived iPSCs to generate biodegradable polymer-based tissue engineered vascular grafts (TEVG), which mimic the native layered architecture of blood vessels. hiPSCs from PBMCs were differentiated into smooth muscle cells as well as endothelial cells. These cells were co-seeded on a biodegradable PGA/P4HB scaffold and cultured in a bioreactor to induce tissue formation in vitro. The resulting small diameter TEVG showed abundant amounts of extracellular matrix, containing a αSMA-positive layer in the interstitium and a thin luminal layer of vWF-positive endothelial cells approximating the architecture of native vessels. Our findings improving the generation of autologous vascular replacements using blood as an easily accessible cell source.

Expression of HIF‑1α in cycling stretch‑induced osteogenic differentiation of bone mesenchymal stem cells

During orthodontic treatment, mechanical force is applied to the teeth, and following a series of complex metabolism changes, the position of the teeth in the alveolar bone change. This process is closely associated with primitive bone mesenchymal stem cells (BMSCs), which may differentiate into osteoblasts precursor cell. A hypoxic microenvironment may be caused by orthodontic mechanical forces between the alveolar bone and the root. Hypoxia-inducible factor 1α (HIF-1α) is a specific receptor that adapts to a hypoxic environment. The present study was designed to investigate whether HIF-1α was involved in the osteoblastic differentiation of BMSCs induced by cyclic tensile stress. During this process, HIF-1α mRNA and protein expression were detected using a reverse transcription-quantitative polymerase chain reaction and western blotting. It was revealed that alkaline phosphatase activity increased in a time-dependent manner in three different stretching strength groups, which indicates that cyclic stretch promotes the osteogenic differentiation of BMSCs. The optimal force stage of osteogenesis was an unexpected discovery, which will provide theoretical guidance for selecting the most suitable orthodontic force for tooth movement in clinical orthodontic treatment. Most importantly, all experiments revealed that HIF-1α mRNA and protein were significantly increased following stretching treatment in BMSCs. It was therefore concluded that HIF-1α may be involved in BMSCs modulating osteogenic metabolism during exposure to cyclic stretch and a hypoxic microenvironment, which may prove useful for the reconstruction of a jaw during orthodontic treatment.

Knockdown of Tcf3 enhances the wound healing effect of bone marrow mesenchymal stem cells in rats

The aim of the present study was to explore the wound healing effect of Tcf3 in rat bone marrow mesenchymal stem cells (BMSCs) and their effects on wound healing. Epidermal growth factor (EGF) and fibroblast growth factors (FGFs) were used to induce BMSCs differentiation into epithelial-like cells. Western Blotting analysis and RT-qPCR were performed to assess the expression levels of Tcf3 and the markers of epithelial-like cells, such as Cytokeratin-18 (CK-18), CK-19 and P63. Cell counting kit-8 (CCK-8) and clone formation assay were carried out to detect cell viability. Immunohistochemistry and HE staining were used to assess the level of Tcf3 protein and skin repair degree, respectively. Rat wound healing model was built to evaluate the effects of BMSCs with altered expression of Tcf3 on wound healing. Results showed that EGF and FGFs stimulation increased the expression of CK-18, CK-19 and P63, improved BMSCs viability, but decreased the expression of Tcf3. Knockdown of Tcf3 in BMSCs increased CK-18, CK-19 and P63 expression and improved cell proliferation, as well as accelerated wound healing process. Moreover, inhibition of Wnt/β-catenin signaling weakened the effect of Tcf3 down-regulation on BMSCs proliferation enhancement. And inhibition of Notch1 signaling impeded the epithelial-like cell differentiation of BMSCs induced by Tcf3 down-regulation. Our study reveals that knockdown of Tcf3 enhances the wound healing process of BMSCs in rat, which provides new approach for accelerating skin regeneration.

The Effects of Different Dynamic Culture Systems on Cell Proliferation and Osteogenic Differentiation in Human Mesenchymal Stem Cells

The culture environment plays an important role for stem cells' cultivation. Static or dynamic culture preserve differential potentials to affect human mesenchymal stem cells' (hMSCs) proliferation and differentiation. In this study, hMSCs were seeded on fiber disks and cultured in a bidirectional-flow bioreactor or spinner-flask bioreactor with a supplement of osteogenic medium. The hMSCs' proliferation, osteogenic differentiation, and extracellular matrix deposition of mineralization were demonstrated. The results showed that the spinner flask improved cell viability at the first two weeks while the bidirectional-flow reactor increased the cell proliferation of hMSCs through the four-week culture period. Despite the flow reactor having a higher cell number, a lower lactose/glucose ratio was noted, revealing that the bidirectional-flow bioreactor provides better oxygen accessibility to the cultured cells/disk construct. The changes of calcium ions in the medium, the depositions of Ca²⁺ in the cells/disk constructs, and alkaline phosphate/osteocalcin activities showed the static culture of hMSCs caused cells to mineralize faster than the other two bioreactors but without cell proliferation. Otherwise, cells were distributed uniformly with abundant extracellular matrix productions using the flow reactor. This reveals that the static and dynamic cultivations regulated the osteogenic process differently in hMSCs. The bidirectional-flow bioreactor can be used in the mass production and cultivation of hMSCs for applications in bone regenerative medicine.

Mouse placental scaffolds: a three-dimensional environment model for recellularization

The rich extracellular matrix (ECM) and availability make placenta eligible as alternative biomaterial source. Herein we produced placental mouse scaffolds by decellularization, and structure, composition, and cytocompatibility were evaluated to be considered as a biomaterial. We obtained a cell-free scaffold containing 9.42 ± 5.2 ng dsDNA per mg of ECM, presenting well-preserved structure and composition. Proteoglycans were widespread throughout ECM without cell nuclei and cell remnants. Collagen I, weak in native placenta, clearly appears in the scaffold after recellularization, opposite distribution was observed for collagen III. Fibronectin was well-observed in placental scaffolds whereas laminin and collagen IV were strong expressed. Placental scaffolds recellularization potential was confirmed after mouse embryonic fibroblasts 3D dynamic culture, resulting in massive scaffold repopulation with cell–cell interactions, cell-matrix adhesion, and maintenance of natural morphology. Our small size scaffolds provide a useful tool for tissue engineering to produce grafts and organ fragments, as well as for cellular biology purposes for tridimensional culture substrate.

Technology Transfer of the Microphysiological Systems: A Case Study of the Human Proximal Tubule Tissue Chip

The adoption of a new technology into basic research, and industrial and clinical settings requires rigorous testing to build confidence in the reproducibility, reliability, robustness, and relevance of these models. Tissue chips are promising new technology, they have the potential to serve as a valuable tool in biomedical research, as well as pharmaceutical development with regards to testing for efficacy and safety. The principal goals of this study were to validate a previously established proximal tubule tissue chip model in an independent laboratory and to extend its utility to testing of nephrotoxic compounds. Here, we evaluated critical endpoints from the tissue chip developer laboratory, focusing on biological relevance (long-term viability, baseline protein and gene expression, ammoniagenesis, and vitamin D metabolism), and toxicity biomarkers. Tissue chip experiments were conducted in parallel with traditional 2D culture conditions using two different renal proximal tubule epithelial cell sources. The results of these studies were then compared to the findings reported by the tissue chip developers. While the overall transferability of this advanced tissue chip platform was a success, the reproducibility with the original report was greatly dependent on the cell source. This study demonstrates critical importance of developing microphysiological platforms using renewable cell sources.

From the Clinical Problem to the Basic Research-Co-Culture Models of Osteoblasts and Osteoclasts

Bone tissue undergoes constant remodeling and healing when fracture happens, in order to ensure its structural integrity. In order to better understand open biological and clinical questions linked to various bone diseases, bone cell co-culture technology is believed to shed some light into the dark. Osteoblasts/osteocytes and osteoclasts dominate the metabolism of bone by a multitude of connections. Therefore, it is widely accepted that a constant improvement of co-culture models with both cell types cultured on a 3D scaffold, is aimed to mimic an in vivo environment as closely as possible. Although in recent years a considerable knowledge of bone co-culture models has been accumulated, there are still many open questions. We here try to summarize the actual knowledge and address open questions.

The effects of doxorubicin-loaded liposomes on viability, stem cell surface marker expression and secretion of vascular endothelial growth factor of three-dimensional stem cell spheroids

The aim of the present study was to evaluate the effects of anionic, cationic and neutral liposomes containing doxorubicin on the cellular viability and osteogenic differentiation of three-dimensional stem cell spheroids. Doxorubicin-loaded liposomes were prepared using the traditional thin-lipid-film-hydration method and were characterized using transmission electron microscopy and a zeta potential analyzer. The doxorubicin release profile from these liposomes was also analyzed in vitro. Three-dimensional cell spheroids were fabricated using silicon elastomer-based concave microwells. Qualitative results of cellular viability were observed using a confocal microscope and quantitative cellular viability was evaluated using a Cell-Counting Kit-8 (CCK-8) assay. Furthermore, the secretion of vascular endothelial growth factor was evaluated. Western blot analysis was performed to assess the expression of collagen I and glyceraldehyde 3-phosphate. Results indicated that the spheroids were well formed in silicon elastomer-based concave microwells on day 1. In general, the shapes of the cells in the in the doxorubicin-loaded anionic, cationic and neutral liposome groups were similar to the control group except for the 10 µg/ml groups on days 3, 5, and 7. No significant changes in cellular viability were noted with the addition of doxorubicin at day 1 but significant decreases in cellular viability were noted with application of doxorubicin at day 5. Notably, higher concentrations of doxorubicin reduced the secretion of vascular endothelial growth factor and stem cell marker expression. To conclude, the present study indicated that doxorubicin-loaded anionic liposomes produced the most sustained release profile and cationic liposomes produced the highest uptake of the stem cell spheroids. These findings suggested that higher concentrations of doxorubicin-loaded liposomes affected cellular viability, the secretion of vascular endothelial growth factor and stem cell marker expression.