Efficient Direct Formic Acid Fuel Cells (DFAFCs) Anode Derived from Seafood waste: Migration Mechanism

Chemical-Dealloying-Derived PtPdPb-Based Multimetallic Nanoparticles: Dimethyl Ether Electrocatalysis and Fuel Cell Application

In this work, we report a novel multimetallic nanoparticle catalyst composed of Pt, Pd, and Pb and its electrochemical activity toward dimethyl ether (DME) oxidation in liquid electrolyte and polymer electrolyte fuel cells. Chemical dealloying of the catalyst with the lowest platinum-group metal (PGM) content, Pt2PdPb2/C, was conducted using HNO3 to tune the catalyst activity. Comprehensive characterization of the chemical-dealloying-derived catalyst nanoparticles unambiguously showed that the acid treatment removed 50% Pb from the nanoparticles with an insignificant effect on the PGM metals and led to the formation of smaller-sized nanoparticles. Electrochemical studies showed that Pb dissolution led to structural changes in the original catalysts. Chemical-dealloying-derived catalyst nanoparticles made of multiple phases (Pt, Pt3Pb, PtPb) provided one of the highest PGM-normalized power densities of 118 mW mgPGM-1 in a single direct DME fuel cell operated at low anode catalyst loading (1 mgPGM cm-2) at 70 °C. A possible DME oxidation pathway for these multimetallic catalysts was proposed based on an online mass spectrometry study and the analysis of the reaction products.

Water-soluble and reusable Ru-NHC catalyst for aqueous-phase transfer hydrogenation of quinolines with formic acid

Water-soluble Ru-NHC complexes were synthesized and their catalytic activity was tested in the transfer hydrogenation of quinoline-type N-heteroarenes using a formic acid/sodium formate buffer solution. The unique multifunctional features of the designed ligand within the catalyst backbone endowed it with excellent durability, reusability and compatibility with a simple aqueous-phase operation. Thus, it was possible to reuse as little as 0.25 mol% of the catalyst for three consecutive catalytic runs to provide an overall turnover number of around 900. A mechanistic investigation suggested that hydride generation was the rate-limiting step, whereas hydride transfer was relatively facile. Furthermore, computational studies supported that the reaction pathway was dominated by 1,4-hydride insertion at the N-heteroarene substrates.

Polyol assisted formaldehyde reduction of bi-metallic Pt-Pd supported agro-waste derived carbon spheres as an efficient electrocatalyst for formic acid and ethylene glycol oxidation

This report explains, (i) the preparation of carbon spheres (CS) from agro-waste through hydrothermal carbonization (HTC) followed by high temperature carbonization, (ii) the decoration of bi-metallic Pt-Pd nanoparticles (Pt-Pd NPs) with different compositions (Pt/C, Pt_0.5Pd₁/C, Pt₁Pd₁/C and Pt₁Pd_0.5/C, Pd/C) on the carbon by ethylene glycol solvated polyol assisted formaldehyde reduction method and (iii) subsequently used as the electrocatalyst for formic acid (FA) and ethylene glycol (EG) electro-oxidation. The structural and morphological properties of the electrocatalysts were studied using advanced physicochemical characterization techniques. The obtained results well evidence the homogeneous dispersion of Pt-Pd NPs on the surface of the carbon. Especially, Pt_0.5Pd₁/C exhibited excellent electrocatalytic property towards formic acid electro-oxidation reaction (FAOR) with a higher current density (256 mA cm^-2) and stability due to "third body effect". On the other hand, Pt₁Pd_0.5/C expressed superior electrochemical performance towards ethylene glycol electro-oxidation reaction (EGOR) due to the strong interaction between high Pt content and Pd. Hence, this work reveals the improved electrocatalytic performance of bi-metallic Pt-Pd NPs supported biomass-derived carbon as a promising anodic electrocatalyst towards FAOR and EGOR.

Platinum Nanostructure Tailoring for Fuel Cell Applications Using Levitated Water Droplets as Green Chemical Reactors

Tailoring of nanostructured materials with well-controlled morphologies and their integration into valuable applications in a facile, cheap, and green way remain a key challenge. Herein, platinum nanoparticles as well as Pt-polymer nanocomposites with unique shapes, including flower-, needle-, porous-, and worm-like structures, were synthesized and simultaneously deposited on a three-dimensional carbon substrate and carbon nanofibers in one step using a levitated, overheated water drop as a green, rotating chemical reactor. Sprinkling of a metal aqueous solution on a hot surface results in its sudden evaporation and creates an overheated zone along with the water self-ionization (i.e., charge separation) at the hot interface. These generated Leidenfrost conditions are believed to induce a series of chemical reactions involving the used solvent and counterions, resulting in the nanoparticles formation. Besides, the in situ generated basic conditions in the vicinity of the liquid-vapor interface due to the loss of hydronium ions into the vapor layer could also play a role in the mechanism of the nanoparticles formation, e.g., by discharging. The as-prepared Pt nanostructures exhibited a superior catalytic activity and stability toward the desired direct formic acid oxidation (essential anodic reaction in fuel cells) into CO₂ without generating CO poisoning intermediates compared to the state-of-the-art commercial PtC electrode. The addressed nanotailoring technique is believed to be a promising, inexpensive, and scalable way for the sustainable manufacture of well-designed nanomaterials for future applications.

Bifunctional Tailoring of Platinum Surfaces with Earth Abundant Iron Oxide Nanowires for Boosted Formic Acid Electro-Oxidation

To expedite the marketing of direct formic acid fuel cells, a peerless inexpensive binary FeOx/Pt nanocatalyst was proposed for formic acid electro-oxidation (FAO). The roles of both catalytic ingredients (FeOx and Pt) were inspired by testing the catalytic performance of FAO at the FeOx/Au and FeOx/GC analogies. The deposition of FeOx proceeded electrochemically with a post‐activating step that identified the catalyst’s structure and performance. With a proper adaptation for the deposition and activation processes, the FeOx/Pt nanocatalyst succeeded to mitigate the typical CO poisoning that represents the principal element deteriorating the catalytic performance of the direct formic acid fuel cells. It also provided a higher (eightfold) catalytic efficiency than the bare Pt substrates toward FAO with a much better durability. Field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) were all employed to inspect, respectively, the surface morphology, bulk composition, and crystal structure of the catalyst. The electrochemical impedance spectra could correlate the charge transfer resistances for FAO over the inspected set of catalysts to explore the role of FeOx in mediating the reaction mechanism.

Hierarchically structured iron-doped silver (Ag-Fe) lotus flowers for an efficient oxygen reduction reaction

The development of cheap and efficient electrocatalysts for the oxygen reduction reaction (ORR) is vital for the immediate commercialization of fuel cells which are still limited by the high cost and low performance of the utilized commercial Pt-based electrodes. As a promising alternative, this study reports on the synthesis of hierarchical iron-doped silver lotus flowers (AgFelotus) by a facile chemical procedure as robust and efficient ORR electrocatalysts. Succinic acid was used as a structure directing agent to tune the morphology of undoped and iron-doped silver particles. In the absence of succinic acid, ball-like silver particles were obtained, while using 2 mM succinic acid led to peony-like flower structures. The doping of silver peony-flowers with iron resulted in lotus-like flower structures with high electrocatalytic activity for ORR together with outstanding tolerance against poisoning with various hydrocarbon (HC) impurities, in situ generated during fuel cell operation, as well as different fuels from anodic crossover. AgFelotus exhibited a superior ORR activity with more than 40 times higher stability than the commercial Pt/C catalyst in alkaline media. This substantial performance enhancement is attributed to the unique lotus-like flower structures providing more electroactive surface sites, in addition to the iron dopants which facilitate ORR charge transfer.