Fumarate-based metal-organic frameworks as a new platform for highly selective removal of fluoride from brick tea

Facile fabrication of graphene oxide and rare earth based metal organic frameworks decorated alginate and chitosan biopolymeric hybrid materials for defluoridation studies

Fluorosis disease can be prevented by the defluoridated water. Hence, the present work focused on the fabrication of hybrid materials using graphene oxide (GO) and Ce-based metal organic frameworks namely cerium fumarate (Ce-Fu) which gives GO/Ce-Fu for defluoridation of water. Further, the powdered GO/Ce-Fu was dispersed with alginate (Alg) and chitosan (CS) biopolymeric matrixes to give GO/Ce-Fu/Alg-CS biopolymeric hybrid beads which were utilized towards defluoridation investigations. The developed GO/Ce-Fu and GO/Ce-Fu/Alg-CS beads have defluoridation capacities (DCs) of 4.410 and 4.753 mg/g within 30 min respectively. The fabricated GO/Ce-Fu and GO/Ce-Fu/Alg-CS beads analyzed by XRD, FTIR, BET, SEM and EDAX studies. The performance of defluoridation influencing parameters such as dosage, contact time, solution pH, interfering anions and temperature studies were optimized with batch scale. Thermodynamic, adsorption isotherms and kinetic studies were studied using hybrid materials to find the nature and order of fluoride adsorption. The fluoride adsorption mechanism of GO/Ce-Fu and GO/Ce-Fu/Alg-CS beads was investigated. The performance of recyclability of the hybrid materials was examined. In addition, the field studies of hybrid materials were also explored to identify their field suitability nature.

Microporous Zr-metal-organic frameworks based-nanocomposites for thermoelectric applications

In the area of energy storage and conversion, Metal-Organic Frameworks (MOFs) are receiving more and more attention. They combine organic nature with long-range order and low thermal conductivity, giving them qualities to be potentially attractive for thermoelectric applications. To make the framework electrically conductive so far, thermoelectricity in this class of materials requires infiltration by outside conductive guest molecules. In this study, an in-situ polymerization of conductive polyaniline inside the porous structure of MOF-801 was conducted to synthesize PANi@MOF-801 nanocomposites for thermoelectrical applications. The growth of polyaniline chains of different loadings inside the host MOF matrix generally enhanced bulk electrical conductivity by about 6 orders of magnitude, leading to Seebeck coefficient value of -141 µVK-1 and improved thermal stability. The unusual increase in electrical conductivity was attributed to the formation of highly oriented conductive PANi chains inside the MOF pores, besides host-guest physical interaction, while the Seebeck coefficient enhancement was because of the energy filtering effect of the developed structure. Modulating the composition of PANi@MOF-801 composites by varying the aniline: MOF-801 ratio in the synthesis bath from 2:1 and 1:1 to 1:2 leads to a change in the semiconductor properties from p-type semiconductor to n-type. Among the examined composites with n-type semiconducting properties exhibited the highest ZT value, 0.015, and lowest thermal conductivity, 0.24 Wm-1 K-1. The synthesized composites have better performance than those recently reported for a similar category of thermoelectric materials related to MOF-based composites.

Development of magnetic La doped Al2O3 core-shell nanoparticle loaded hydrogel for selective recovery of fluoride from aquatic medium

The selective removal of pollutants from water bodies is regarded as a conciliation between the rapid expansion of industrial activities and need of clean water for sustainability. Fluoride is one such geogenic pollutant, and various materials have already been reported. Developing an efficient field employable material is however a challenge. Herein, we report the synthesis and competencies of strategically designed magnetic La-doped Al2O3 core-shell nanoparticle loaded polymeric nanohybrid as a benchmark fluoride sorbent. A facile synthesis strategy involved fabrication of Fe3O4 magnetic core followed by growth of La doped Al2O3 shell using sol-gel method. Doping of La2O3 into Al2O3 structure was optimised (6%), resulting in Fe3O4-Al0.94 La0.06O1.5 core-shell particles which provided exceptional fluoride affinity. The obtained magnetic Fe3O4-Al0.94La0.06O1.5 core-shell nanoparticles were then loaded (22%) into alginate to form cross-linked hydrogel beads (Fe3O4-Al0.94 La0.06 O1.5-Ca-ALG). These prepared hydrogel beads were characterised and utilized for selective recovery of fluoride under different ambient conditions. Driving forces for enhanced fluoride uptake by La doped Al2O3 were investigated and explained with the help of both experimental observation and theoretical simulation. Density functional theory calculations indicated significant expansion in the cell volume of Al2O3 due to La doping which favoured the fluoride sorption. The calculated defect formation energy for the incorporation of F into Al2O3 was found to decrease in the presence of La. XPS analysis suggested direct interaction of fluoride with Al, forming Al-F bond and breaking Al-O bond. Different vital parameters for uptake were optimised. Also, kinetics, isotherm and diffusion models were evaluated. Developed hydrogel beads attained record sorption capacity of 132.3 mgg-1 for fluoride. Overall, excellent stability, no leaching of constituents, effectiveness for selective fluoride recovery from groundwater, brand it a perfect epitome of sustainable water treatment application.

MOF-801 based solid phase microextraction fiber for the monitoring of indoor BTEX pollution

Benzene, toluene, ethylbenzene and xylenes (BTEX) are some of the better-known indoor air pollutants, for which effective monitoring is important. The analysis of BTEX can be performed by different type of solid phase microextraction (SPME) fibers. This study presents a proposal for a low cost, convenient and environmentally friendly analytical method for the determination of BTEX in air samples using custom made SPME fibers. In this context, custom made metal organic frameworks (MOF-801) were coated on a stainless-steel wire for SPME fiber preparation. The analysis of BTEX was performed by introducing SPME fiber into an analyte-containing Tedlar bag in steady-state conditions. After the sampling step, the analytes were analyzed using gas chromatography mass spectrometry in selected ion monitoring mode. Parameters that affect the analysis results were optimized; these include desorption temperature and time, preconditioning time, extraction temperature and time, and sample volume. Under optimized conditions, analytical figure of merits of developed method were obtained, including limits of detection (LOD) (0.012 - 0.048 mg/m3), linear ranges (0.041-18 mg/m3), intraday and interday repeatability (2.08 - 4.04% and 3.94 - 6.35%), and fiber to fiber reproducibility (7.51 - 11.17%). The proposed method was successfully applied to real air samples with an acceptable recovery values between 84.5% and 110.9%. The developed method can be applied for the effective monitoring of BTEX.

Fixed-bed adsorption studies of endocrine-disrupting compounds from water by using novel calcium-based metal-organic frameworks

The presence of emerging water pollutants such as endocrine-disrupting compounds (EDCs), including 17-ethynylestradiol (EE2), bisphenol A (BPA), and perfluorooctanoic acid (PFOA), in contaminated water sources poses significant environmental and health challenges. This study aims to address this issue by investigating the efficiency of novel calcium-based metal-organic frameworks, known as mixed-linker calcium-based metal-organic frameworks (Ca-MIX), in adsorbing these endocrine-disrupting compounds. This study analyzed the influence of influent concentration, bed height, and flow rate on pollutant removal, with bed height emerging as a crucial factor. From the breakthrough curves, it was determined that the column maximum adsorption capacities followed the order of 17-ethynylestradiol (101.52 μg/g; 40%) > bisphenol A (99.07 μg/g; 39%) > perfluorooctanoic acid (81.28 μg/g; 32%). Three models were used to predict the adsorption process, with the Yan model outperforming the other models. This suggests the potential of mixed-linker calcium-based metal-organic frameworks for removing endocrine-disrupting compounds from water, using the Yan model as an effective predictor. Overall, this study provides valuable insights for the development of effective water treatment methods using mixed-linker calcium-based metal-organic frameworks to remove endocrine-disrupting compounds from contaminated water sources.

Calcium l-Malate and d-Tartarate Frameworks as Adjuvants for the Sustainable Delivery of a Fungicide

Agrichemical adjuvants that combine a highly selective, efficient, and active mode of operation are critically needed to realize a more sustainable approach to their usage. Herein, we report the synthesis and full characterization of two new metal-organic frameworks (MOFs), termed UPMOF-1 and UPMOF-2, that were constructed from eco-friendly Ca2+ ions and naturally occurring, low-molecular weight plant acids, l-malic and d-tartaric acid, respectively. Upon structural elucidation of both MOFs, a widely used fungicide, hexaconazole (Hex), was loaded on the structures, reaching binding affinities of -5.0 and -3.5 kcal mol-1 and loading capacities of 63% and 62% for Hex@UPMOF-1 and Hex@UPMOF-2, respectively, as a result of the formation of stable host-guest interactions. Given the framework chemistry of the MOFs and their predisposition to disassembly under relevant agricultural conditions, the sustained release kinetics were determined to show nearly quantitative release (98% and 95% for Hex@UPMOF-1 and Hex@UPMOF-2, respectively) after >500 h, a release profile drastically different than the control (>80% release in 24 h), from which the high efficiency of these new systems was established. To confirm their high selectivity and activity, in vitro and in vivo studies were performed to illustrate the abilities of Hex@UPMOF-1 and Hex@UPMOF-2 to combat the known aggressive pathogen Ganoderma boninense that causes basal stem rot disease in oil palm. Accordingly, at an extremely low concentration of 0.05 μg mL-1, both Hex@UPMOF-1 and Hex@UPMOF-2 were demonstrated to completely inhibit (100%) G. boninense growth, and during a 26 week in vivo nursery trial, the progression of basal stem rot infection was completely halted upon treatment with Hex@UPMOF-1 and Hex@UPMOF-2 and seedling growth was accelerated given the additional nutrients supplied via the disassembly of the MOFs. This study represents a significant step forward in the design of adjuvants to support the environmentally responsible use of agrichemical crop protection.

Heterostructured Ag@MOF-801/MIL-88A(Fe) Nanocomposite as a Biocompatible Photocatalyst for Degradation of Reactive Black 5 under Visible Light

Heterostructured Ag@MOF-801/MIL-88A(Fe) nanocomposite was synthesized through template effects in metal-organic frameworks (MOFs). MIL-88A(Fe) was fabricated on a MOF-801 template using the internal extended growth method (IEGM) via polyvinylpyrrolidone (PVP) as the structure-director agent to create the MIL-88A(Fe)-on-MOF-801 heterostructure. The MOF-801/MIL-88A(Fe) heterostructure was used as a template for the formation of Ag nanoparticles (NPs) inside it via a double solvents method (DSM) combined with a photoreduction route (PR). To characterize synthesized samples to a high level of detail, PXRD, FT-IR, EDX, N2 adsorption-desorption isotherms, TEM, DRS, PL, EIS, and Mott-Sckottky measurements were used. The resulting Ag@MOF-801/MIL-88A(Fe) nanocomposite demonstrated the highest photocatalytic activity of 91.72% for the degradation of Reactive Black 5, after 30 min under visible light irradiation.

Enhanced atmospheric water harvesting efficiency through green-synthesized MOF-801: a comparative study with solvothermal synthesis

Adsorption-based atmospheric water harvesting has emerged as a compelling solution in response to growing global water demand. In this context, Metal-organic frameworks (MOFs) have garnered considerable interest due to their unique structure and intrinsic porosity. Here, MOF 801 was synthesized using two different methods: solvothermal and green room temperature synthesis. Comprehensive characterization indicated the formation of MOF-801 with high phase purity, small crystallite size, and excellent thermal stability. Nitrogen adsorption-desorption analysis revealed that green-synthesized MOF-801 possessed an 89% higher specific surface area than its solvothermal-synthesized counterpart. Both adsorbents required activation at a minimum temperature of 90 °C for optimal adsorption performance. Additionally, green-synthesized MOF-801 demonstrated superior adsorption performance compared to solvothermal-synthesized MOF-801, attributed to its small crystal size (around 66 nm), more hydrophilic functional groups, greater specific surface area (691.05 m2/g), and the possibility of having a higher quantity of defects. The maximum water adsorption capacity in green-synthesized MOF-801 was observed at 25 °C and 80% relative humidity, with a value of 41.1 g/100 g, a 12% improvement over the solvothermal-synthesized MOF-801. Remarkably, even at a 30% humidity level, green-synthesized MOF-801 displayed a considerable adsorption capacity of 31.5 g/100 g. Importantly, MOF-801 exhibited long-term effectiveness in multiple adsorption cycles without substantial efficiency decline.

Water-assisted hydrogen spillover in Pt nanoparticle-based metal-organic framework composites

Hydrogen spillover is the migration of activated hydrogen atoms from a metal particle onto the surface of catalyst support, which has made significant progress in heterogeneous catalysis. The phenomenon has been well researched on oxide supports, yet its occurrence, detection method and mechanism on non-oxide supports such as metal-organic frameworks (MOFs) remain controversial. Herein, we develop a facile strategy for efficiency enhancement of hydrogen spillover on various MOFs with the aid of water molecules. By encapsulating platinum (Pt) nanoparticles in MOF-801 for activating hydrogen and hydrogenation of C=C in the MOF ligand as activated hydrogen detector, a research platform is built with Pt@MOF-801 to measure the hydrogenation region for quantifying the efficiency and spatial extent of hydrogen spillover. A water-assisted hydrogen spillover path is found with lower migration energy barrier than the traditional spillover path via ligand. The synergy of the two paths explains a significant boost of hydrogen spillover in MOF-801 from imperceptible existence to spanning at least 100-nm-diameter region. Moreover, such strategy shows universality in different MOF and covalent organic framework materials for efficiency promotion of hydrogen spillover and improvement of catalytic activity and antitoxicity, opening up new horizons for catalyst design in porous crystalline materials.

Ultrafast Water H-Bond Rearrangement in a Metal-Organic Framework Probed by Femtosecond Time-Resolved Infrared Spectroscopy

We investigated the water H-bond network and its dynamics in Ni₂Cl₂BTDD, a prototypical MOF for atmospheric water harvesting, using linear and ultrafast IR spectroscopy. Utilizing isotopic labeling and infrared spectroscopy, we found that water forms an extensive H-bonding network in Ni₂Cl₂BTDD. Further investigation with ultrafast spectroscopy revealed that water can reorient in a confined cone up to ∼50° within 1.3 ps. This large angle reorientation indicates H-bond rearrangement, similar to bulk water. Thus, although the water H-bond network is confined in Ni₂Cl₂BTDD, different from other confined systems, H-bond rearrangement is not hindered. The picosecond H-bond rearrangement in Ni₂Cl₂BTDD corroborates its reversibility with minimal hysteresis in water sorption.

Porous Lanthanum-Zirconium phosphate with superior adsorption capability of fluorine for water treatment

Bimetal oxide is a popular defluorinating material. Hexadecyl trimethyl ammonium bromide (CTAB) as a surfactant successfully synthesizes a novel lanthanum-zirconium phosphate to remove fluorine from groundwater. Lanthanum-zirconium phosphate at a Zr/La molar ratio of 2 exhibited a specific surface area of 455.14 m2/g with a wide pore size, which was achieved by incorporating lanthanum into materials and removing CTAB through calcination. The maximum fluoride adsorption capacity is 109.17 mg/g, which is tenfold that of mesostructured zirconium phosphate. Specifically, analysis revealed that mZrP and LamZrP2-1 were amorphous, which is consistent with HAADF-STEM. The fluoride adsorption fitted well with the pseudo-second-order equation model and Langmuir isotherm mode. LamZrP2-1 had potent anti-interference ability without PO43-. Moreover, LamZrP2-1 was reusable for at least six cycles of adsorption-desorption with little influence. The adsorption mechanism of fluoride was discussed by X-ray photoelectron spectroscopy (XPS), nuclear magnetic resonance spectroscopy (NMR) analysis, and Fourier transform infrared (FTIR) spectroscopy. Fluoride was captured by LamZrP2-1 via charge attraction, ligand exchange of different bond strengths, and ion exchange. Lanthanum-zirconium phosphate is important not only in the research and development of bimetal oxides but also in the treatment of groundwater for fluoride removal.

Constructing functional metal-organic frameworks by ligand design for environmental applications

Metal-organic frameworks (MOFs) with unique physical and chemical properties are composed of metal ions/clusters and organic ligands, including high porosity, large specific surface area, tunable structure and functionality, which have been widely used in chemical sensing, environmental remediation, and other fields. Organic ligands have a significant impact on the performance of MOFs. Selecting appropriate types, quantities and properties of ligands can well improve the overall performance of MOFs, which is one of the critical issues in the synthesis of MOFs. This article provides a comprehensive review of ligand design strategies for functional MOFs from the number of different types of organic ligands. Single-, dual- and multi-ligand design strategies are systematically presented. The latest advances of these functional MOFs in environmental applications, including pollutant sensing, pollutant separation, and pollutant degradation are further expounded. Furthermore, an outlook section of providing some insights on the future research problems and prospects of functional MOFs is highlighted with the purpose of conquering current restrictions by exploring more innovative approaches.

The elimination and extraction of organosulfur compounds from real water and soil samples using metal organic framework/graphene oxide as a novel and efficient nanocomposite

In the present work, an efficient metal organic framework/graphene oxide (MOF-801/GO) sorbent was fabricated and employed for the detection of organosulfur pesticides (OSPs) in real samples using gas chromatography-flame photometric detection (GC-FPD). The optimal extraction parameters for the suggested solid-phase extraction (SPE) include sorbent amount (60 mg), extraction solvent (acetonitrile) and extraction time (5 min). The linear dynamic ranges and detection limits for organosulfur pesticides (OSPs) samples under above extraction conditions were ranged from 0.5 to 300 μg L^-1 and 0.1-1.1 μg L^-1, respectively. Moreover, the proposed SPE/GC-FDP method was applied for the analysis of pesticides in different real environmental water and soil samples. The obtained recoveries of the analytes in were between 92.0 and 106.8% and relative standard deviation (RSD) values were lower than 9.2%. The application of the MOF-801/GO as a sorbent in dSPE of OSPs analytes showed to be reliable, fast and sensible methodology for pesticides monitoring in different environmental samples.

Applications of biomass-based materials to remove fluoride from wastewater: A review

Fluoride is one of the essential trace elements for the human body, but excessive fluoride will cause serious environmental and health problems. This paper summarizes researches on the removal of fluoride from aqueous solutions using newly developed or improved biomass materials and biomass-like organic materials in recent years. These biomass materials are classified into chitosan, microorganisms, lignocellulose plant materials, animal attribute materials, biological carbonized materials and biomass-like organic materials, which are explained and analyzed. By comparing adsorption performance and mechanism of adsorbents for removing fluoride, it is found that carbonizing materials and modifying adsorbents with metal ions are more beneficial to improving adsorption efficiency and the adsorption mechanisms are various. The adsorption capacities are still considerable after regeneration. This paper not only reviews the properties of these materials for fluoride removal, but also focuses on the comparison of materials performance and fluoride removal mechanism. Herein, by discussing the improved adsorption performance and research technology development of biomass materials and biomass-like organic materials, various innovative ideas are provided for adsorbing and removing contaminants.

Potential of biocompatible calcium-based metal-organic frameworks for the removal of endocrine-disrupting compounds in aqueous environments

Rapid urbanization, industrialization and population growth have accelerated the amount and variety of emerging contaminants being released into the aqueous environment, including endocrine-disrupting compounds (EDCs). The introduction of these compounds constitutes a threat to human health and the environment, even at trace levels. Hence, new water treatment technologies are urgently required to effectively remove EDCs from water. The currently available technologies used in water remediation processes are expensive and ineffective, and some produce harmful by-products. Calcium-based metal-organic frameworks (Ca-MOFs) are porous synthetic materials that can potentially be applied as adsorbents. These MOFs are hydrolytically stable, biocompatible and low-cost compared with conventional porous materials. The structure of Ca-MOFs is maintained even though calcium metal centers in the structure can easily coordinate with water. Ca-MOFs and their composite derivatives have the potential for use in water purification because these biocompatible adsorbents have been shown to selectively extract a significant quantity of contaminants. This review highlights the potential of Ca-MOFs to adsorb EDCs from aqueous environments and discusses adsorbent preparation methods, adsorption mechanisms, removal capacity, water stability and recyclability. This review will support future efforts in synthesizing new biocompatible MOFs as an environmental treatment technology that can effectively remove EDCs from water, thereby improving environmental and human health.

Enhancing Thermoelectric Properties of Conductive Polymers Using Zr-Metal-Organic Frameworks Composite Materials

Controlling the polymerization of polypyrrole (Ppy) in presence of Zr-based metal organic-framework (Zr-MOFs) using sodium dodecyl sulphonate (SDS) as a dopant, leads to the formation of a new class of thermoelectric materials based on conducting polymer and highly porous MOFs with enhanced properties for energy production applications. The polymerization of polypyrrole in the Zr-Fumerate pores leads to the formation of homogenously coated MOF-spheres with high crystalinity and a high degree of improvement in many electrical properties such as conductivity and carrier mobility. The figure shows the movement of the electrons from the hot to the cold side in the aligned polymer inside the MOF pores.

Nine days extended release of adenosine from biocompatible MOFs under biologically relevant conditions

Adenosine is a small molecule directly involved in maintaining homeostasis under pathological and stressful conditions. Due to its rapid metabolism, delivery vehicles capable of exhibiting extended release of adenosine are of paramount interest. Herein, we demonstrate a superior long-term (9 days) release profile of adenosine from biocompatible MOFs in a physiologically relevant environment. The key to the biocompatibility of MOFs is their stability under biologically relevant conditions. This study additionally highlights the interplay between the chemical stability of prototypal MOFs, assessed under physiological conditions, and their cytotoxicity profiles. Cytotoxicity of the prototypal Zn-based MOF (ZIF-8) and three Zr-based MOFs (UiO-66, UiO-66-NH₂, and MOF-801) on six cell types was assessed. The cell types selected were valve interstitial cells (VICs), valve endothelial cells (VECs), adipose tissue-derived stem cells (ADSCs), and cell lines U937, THP1, and HeLa. Zr-based MOFs demonstrated a wide tolerance range in the cell culture cytotoxicity assays, demonstrating cell viability up to a very high dose of ∼1000 μg mL^-1, as compared to ZIF-8 which showed notable cytotoxicity in as little as ∼100 μg mL^-1 dose. This study demonstrates, for the first time, the utilization of biocompatible MOFs for adenosine delivery as well as establishes a direct link between structural instability in the cell culture medium and the observed cytotoxicity of the studied MOFs.

Fumarate Based Metal–Organic Framework: An Effective Catalyst for the Transesterification of Used Vegetable Oil

Advancement of technology for the sustainable production of biodiesel is of significant importance in fighting against rising fuel costs due to the fast depletion of fossil fuels. In this regard, the application of highly efficient MOFs (metal–organic frameworks)-based materials as acidic, basic, or supported heterogeneous catalysts plays a crucial role in enhancing the efficiency of biodiesel production processes. In this report, we demonstrate the synthesis and catalytic application of Zr-fumarate-MOF (also known as MOF-801) as a heterogeneous catalyst for the transesterification reaction of used vegetable oil (UVO) for the production of biodiesel. The formation of MOF-801 and its structural stability is confirmed by a variety of characterization techniques including XRD, SEM, EDX, FT-IR, BET, and TGA analyses. The results revealed the formations of highly crystalline, cubic MOF-801 possessing thermal stability below 500 °C. The MOF-801 catalyst demonstrated moderate catalytic activity during transesterification of UVO (~60%) at 50 wt.% of methanol: oil, 10 wt.% catalyst loading, 180 °C reaction temperature, and 8 h of reaction time. Furthermore, the catalyst has exhibited adequate reusability with a slight reduction in the reaction yield of up to ~10% after three cycles.

Outstanding fluoride removal from aqueous solution by a La-based adsorbent†

A La-based adsorbent was prepared with La(NO₃)₃·6H₂O, 2-methylimidazole and DMF via amide-hydrolysis and used for fluoride decontamination from aqueous water. The obtained adsorbent was lanthanum methanoate (La(COOH)₃). The effects of pH value, initial F⁻ concentration and interfering ions on defluoridation properties of as-prepared La(COOH)₃ were assessed through batch adsorption tests. The adsorption kinetics, isotherm models and thermodynamics were employed to verify the order, nature and feasibility of La(COOH)₃ towards fluoride removal. The results imply that La(COOH)₃ is preferable for defluoridation over a wide pH range of 2 to 9 without interference. Simultaneously, the defluoridation process of La(HCOO)₃ accords to the pseudo-second order model and Langmuir isotherm, revealing chemical adsorption is the main control step. The maximum fluoride capture capacities of La(COOH)₃ at 30, 40 and 50 °C are 245.02, 260.40 and 268.99 mg g⁻¹, respectively. The mechanism for defluoridation by La(COOH)₃ was revealed by PXRD and XPS. To summarize, the as-synthesized La based adsorbent could serve as a promising adsorbent for defluoridation from complex fluoride-rich water.

A La-based adsorbent was prepared with La(NO₃)₃·6H₂O, 2-methylimidazole and DMF via amide-hydrolysis and used for fluoride decontamination from aqueous water.

Zirconium-Based Metal Organic Frameworks for the Capture of Carbon Dioxide and Ethanol Vapour. A Comparative Study

This paper reports on the comparison of three zirconium-based metal organic frameworks (MOFs) for the capture of carbon dioxide and ethanol vapour at ambient conditions. In terms of efficiency, two parameters were evaluated by experimental and modeling means, namely the nature of the ligands and the size of the cavities. We demonstrated that amongst three Zr-based MOFs, MIP-202 has the highest affinity for CO2 (-50 kJ·mol-1 at low coverage against around -20 kJ·mol-1 for MOF-801 and Muc Zr MOF), which could be related to the presence of amino functions borne by its aspartic acid ligands as well as the presence of extra-framework anions. On the other side, regardless of the ligand size, these three materials were able to adsorb similar amounts of carbon dioxide at 1 atm (between 2 and 2.5 µmol·m-2 at 298 K). These experimental findings were consistent with modeling studies, despite chemisorption effects, which could not be taken into consideration by classical Monte Carlo simulations. Ethanol adsorption confirmed these results, higher enthalpies being found at low coverage for the three materials because of stronger van der Waals interactions. Two distinct sorption processes were proposed in the case of MIP-202 to explain the shape of the enthalpic profiles.

Toward sustainable syntheses of Ca-based MOFs

We report the use of benign and green precursors, including waste chicken eggshells and PET (polyethylene terephthalate) from recycled plastic bottles, for the facile synthesis of a variety of calcium-based metal-organic frameworks (Ca-MOFs), using water based and mechanochemical synthesis techniques.

High-performance lanthanum-based metal-organic framework with ligand tuning of the microstructures for removal of fluoride from water

Excess fluoride in water poses a threat to ecology and human health, which has attracted global attention. In this study, a series of lanthanum-based metal-organic frameworks (La-MOFs) were synthesized by varying the organic ligands (i.e., terephthalic acid (BDC), trimesic acid (BTC), biphenyl-4,4-dicarboxylic acid (BPDC), 2,5-dihydroxyterephthalic acid (BHTA), and 1,2,4,5-benzenetetracarboxylic acid (PMA)) to control the microscopic structure of the MOFs and subsequently apply them for the removal of fluoride in water. The maximum capture capacities of La-BTC, La-BPDC, La-BHTA, La-PMA, and La-BDC at 298 K are 105.2, 125.9, 145.5, 158.9, and 171.7 mg g^-1, respectively. The adsorption capacity is greater than most reported adsorbents. The adsorption isotherms of La-MOFs for fluoride are well fit to the Langmuir isotherm model. In addition, the adsorption kinetics of La-BTC, La-BPDC, La-BHTA, La-PMA, and La-BDC follows the pseudo-second-order kinetic model, and the kinetic rate-limiting step of adsorption is chemical adsorption. Thermodynamics revealed that temperature is favorable for the adsorption of fluoride. Meanwhile, La-BTC, La-BPDC, La-BHTA, La-PMA, and La-BDC are suitable for the removal of fluoride in a relatively wide pH range (4.0-9.0). Simultaneously, from X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis, electrostatic attraction and ligand exchange are identified as the main action mechanisms for the adsorption of fluoride of La-MOFs. The prepared La-MOFs are used as efficient adsorbents for removal of fluoride in actual water, indicating that they have great potential in removing fluoride in real and complex environmental water. This work provides a new strategy for designing adsorbents with adjustable microstructure and expected function to effectively recover fluorosis in water.

High-Throughput Discovery of a Rhombohedral Twelve-Connected Zirconium-Based Metal-Organic Framework with Ordered Terephthalate and Fumarate Linkers

We report a metal‐organic framework where an ordered array of two linkers with differing length and geometry connect [Zr₆(OH)₄O₄]¹²⁺ clusters into a twelve‐connected fcu net that is rhombohedrally distorted from cubic symmetry. The ordered binding of equal numbers of terephthalate and fumarate ditopic carboxylate linkers at the trigonal antiprismatic Zr₆ core creates close‐packed layers of fumarate‐connected clusters that are connected along the single remaining threefold axis by terephthalates. This well‐defined linker arrangement retains the three‐dimensional porosity of the Zr cluster‐based UiO family while creating two distinct windows within the channels that define two distinct guest diffusion paths. The ordered material is accessed by a restricted combination of composition and process parameters that were identified by high‐throughput synthesis.

Formulation of Metal-Organic Framework-Based Drug Carriers by Controlled Coordination of Methoxy PEG Phosphate: Boosting Colloidal Stability and Redispersibility

Metal-organic framework nanoparticles (nanoMOFs) have been widely studied in biomedical applications. Although substantial efforts have been devoted to the development of biocompatible approaches, the requirement of tedious synthetic steps, toxic reagents, and limitations on the shelf life of nanoparticles in solution are still significant barriers to their translation to clinical use. In this work, we propose a new postsynthetic modification of nanoMOFs with phosphate-functionalized methoxy polyethylene glycol (mPEG-PO3) groups which, when combined with lyophilization, leads to the formation of redispersible solid materials. This approach can serve as a facile and general formulation method for the storage of bare or drug-loaded nanoMOFs. The obtained PEGylated nanoMOFs show stable hydrodynamic diameters, improved colloidal stability, and delayed drug-release kinetics compared to their parent nanoMOFs. Ex situ characterization and computational studies reveal that PEGylation of PCN-222 proceeds in a two-step fashion. Most importantly, the lyophilized, PEGylated nanoMOFs can be completely redispersed in water, avoiding common aggregation issues that have limited the use of MOFs in the biomedical field to the wet form-a critical limitation for their translation to clinical use as these materials can now be stored as dried samples. The in vitro performance of the addition of mPEG-PO3 was confirmed by the improved intracellular stability and delayed drug-release capability, including lower cytotoxicity compared with that of the bare nanoMOFs. Furthermore, z-stack confocal microscopy images reveal the colocalization of bare and PEGylated nanoMOFs. This research highlights a facile PEGylation method with mPEG-PO3, providing new insights into the design of promising nanocarriers for drug delivery.

Cerium based UiO-66 MOF as a multipollutant adsorbent for universal water purification

Herein, we demonstrate the use of cerium (Ce)-UiO-66 metal organic framework (MOF) for the removal of a variety of potentially toxic pollutants. The Ce-UiO-66 MOF, with similar framework topologies to Zr-UiO-66, has not been explored for its adsorptive properties in water remediation. The replacement of Zr metal center with Ce yields a MOF that can be synthesized in shorter durations with lesser energy consumptions and with excellent multipollutant adsorption properties. Further, the Ce-UiO-66 MOF was also studied for its adsorption abilities in the binary component system. Interestingly, the adsorbent showed higher adsorption capacities in the presence of other pollutants. Removal studies for other potentially toxic anionic and cationic dyes showed that the Ce-UiO-66 MOF has a wide range of contaminant removal abilities. Investigations of individual adsorption capacities revealed that the Ce-UiO-66 MOF has a maximum adsorption capacity of 793.7 mg/g for congo red (CR), 110 mg/g for methylene blue (MB), 66.1 mg/g for fluoride (F^-), 30 mg/g for Cr⁶⁺ and 485.4 mg/g for the pharmaceutical waste diclofenac sodium (DCF). To imply the practical applications of the Ce-UiO-66 MOF we have also demonstrated an adaptable filter that could separate all the potentially toxic pollutants.

CaFu MOF as an efficient adsorbent for simultaneous removal of imidacloprid pesticide and cadmium ions from wastewater

Heavy metal ions and pesticides are the noteworthy toxic substances which must be removed from contaminated water for safeguarding public health. The higher levels of these substances in natural water may adversely affect the human health, climate and the eco-framework. The adsorptive removal of hazardous constituents employing metal organic frameworks has drawn considerable attention of researchers during the last decade. From this point of view, single crystal of calcium fumarate [Ca(C₄H₄O₄)_1.5 (H₂O)(CH₃OH)₂] has been developed and analyzed by single crystal X-ray crystallography which confirmed the formation of 3-D metal organic frameworks (MOFs). The synthesized MOFs was employed for simultaneous adsorptive removal of imidacloprid, a high consumption pesticide, and highly toxic Cd (II) from aqua ecosystem. The effect of variation in experimental conditions such as solution pH, adsorbent dosage, contact time, initial concentration and temperature on adsorption was systematically evaluated. Both the imidacloprid and Cd(II) exhibited maximum adsorption at pH 6.5 and 7.8, respectively. The equilibrium empirical data was fitted into Langmuir, Freundlich and Temkin isotherms. The adsorption capacity of CaFu MOFs was observed to be 467.23 and 781.2 mg g^-1 for imidacloprid and cadmium ions, respectively. The adsorbed pollutants were desorbed from the adsorbent using dilute HCl, and the material was reused for five adsorption-desorption cycles without any appreciable loss of adsorption capacity. Therefore, the 3-D CaFu MOFs could be utilized as a novel material for adsorptive removal of imidacloprid pesticide as well as Cd (II) from wastewater.

Calcium-Based Metal-Organic Frameworks and Their Potential Applications

Metal-organic frameworks (MOFs) built on calcium metal (Ca-MOFs) represent a unique subclass of MOFs featuring high stability, low toxicity, and relatively low density. Ca-MOFs show considerable potential for molecular separations, electronic, magnetic, and biomedical applications, although they are not investigated as extensively as transition metal-based MOFs. Compared to MOFs made of other groups of metals, Ca-MOFs may be particularly advantageous for certain applications such as adsorption and storage of light molecules because of their gravimetric benefit, and drug delivery due to their high biocompatibility. This review intends to provide an overview on the recent development of Ca-MOFs, including their synthesis, crystal structures, important properties, and related applications. Various synthetic methods and techniques, types of building blocks, structure and porosity features, selected physical properties, and potential uses will be discussed and summarized. Representative examples will be illustrated for each type of important applications with a focus on their structure-property relations.

Synthesis and characterization of defective UiO-66 for efficient co-immobilization of arsenate and fluoride from single/binary solutions

Here, we aimed to synthesize UiO-66 architected fumaric acid mediated lanthanum (La-fum), zirconium (Zr-fum), and cerium (Ce-fum) metal-organic frameworks (MOFs) for co-immobilizations of both arsenate and fluoride from both single and binary systems. The crystalline behavior of Zr-fum MOF was the lowest compared to the other two forms, due to the fact that it required a modulator support as the nucleus growth nature of zirconium moiety is different. The Langmuir maximum adsorption densities of arsenate (fluoride) were 2.689 (4.240), 1.666 (2.255), and 2.174 (4.155) mmol/g for La-fum, Zr-fum, and Ce-fum, respectively and these adsorption densities were found to have record-high values compared with the existing materials in the literature. The arsenate and fluoride adsorption on the MOF materials were confirmed by XPS, PXRD and FTIR studies. The arsenate adsorption mechanism on La-fum and Ce-fum through monodentate complexation confirmed using the distinguished K-edge shell distance in EXAFS studies. The arsenate and fluoride-sorbed materials were recycled using 0.01 M HNO₃ and were further utilized for six consecutive cycles for both arsenate and fluoride adsorption indicated the feasibility of the materials. This kind of facile and easy solvothermal synthesized MOFs could pave a way towards the removal of toxins in a practical wastewater as these have superior adsorption properties, stability and reusability.

Fluoride absorption, transportation and tolerance mechanism in Camellia sinensis, and its bioavailability and health risk assessment: a systematic review

Tea is the one of the most popular non-alcoholic caffeinated beverages in the world. Tea is produced from the tea plant (Camellia sinensis (L.) O. Kuntze), which is known to accumulate fluoride. This article systematically analyzes the literature concerning fluoride absorption, transportation and fluoride tolerance mechanisms in tea plants. Fluoride bioavailability and exposure levels in tea infusions are also reviewed. The circulation of fluoride within the tea plantation ecosystems is in a positive equilibrium, with greater amounts of fluoride introduced to tea orchards than removed. Water extractable fluoride and magnesium chloride (MgCl₂ ) extractable fluoride in plantation soil are the main sources of absorption by tea plant root via active trans-membrane transport and anion channels. Most fluoride is readily transported through the xylem as F^- /F-Al complexes to leaf cell walls and vacuole. The findings indicate that tea plants employ cell wall accumulation, vacuole compartmentalization, and F-Al complexes to co-detoxify fluoride and aluminum, a possible tolerance mechanism through which tea tolerates higher levels of fluoride than most plants. Furthermore, dietary and endogenous factors influence fluoride bioavailability and should be considered when exposure levels of fluoride in commercially available dried tea leaves are interpreted. The relevant current challenges and future perspectives are also discussed. © 2020 Society of Chemical Industry.

Magnetic carnosine-based metal-organic framework nanoparticles: fabrication, characterization and application as arsenic adsorbent

This study centers on the controllable synthesis, characterization, and application of a novel magnetic bio-metal-organic framework (Bio-MOF) for the adsorption and subsequent removal of arsenic from aqueous solutions. Zinc ions and carnosine (Car) were exploited to construct the Car-based MOF on the surface of magnetite (Fe₃O₄ NPs). The Magnetite precoating with Car led to an increase in the yield and the uniform formation of the magnetic MOF. The prepared magnetic Bio-MOF nanoparticles (Fe₃O₄-Car-MOF NPs) had semi-spherical shape with the size in the range of 35-77 nm, and the crystalline pattern of both magnetite and Car-based MOF. The NPs were employed as an adsorbent for arsenic (As) removal. The adsorption analyses revealed that all studied independent variables including pH, adsorbent dose, and initial arsenic concentration had a significant effect on the arsenic adsorption, and the adsorption data were well matched to the quadratic model. The predicted adsorption values were close to the experimental values confirming the validity of the suggested model. Furthermore, adsorbent dose and pH had a positive effect on arsenic removal, whereas arsenic concentration had a negative effect. The adsorption isotherm and kinetic studies both revealed that As adsorption fitted best to the Freundlich isotherm model. The maximum monolayer adsorption capacity (94.33 mg/g) was achieved at room temperature, pH of 8.5 and adsorbent dose of 0.4 g/L. Finally, the results demonstrated that the adsorbent could be efficiently applied for arsenic removal from aqueous environment.

MOFs for the treatment of arsenic, fluoride and iron contaminated drinking water: A review

Over the last few decades, the global pollution of surface and groundwater poses a serious threat not only to human beings but also towards aquatic lives due to the presence of emerging contaminants. Among the others, the presence of arsenic, fluoride, and iron are considered as the most common toxic pollutants in water bodies. The emergence of metal organic frameworks (MOFs) with high porosity and surface area is represented as significant inclusion into the era of entrapping contaminants present in drinking water. In the present review article, an in-depth insight is provided on the recent developments in the removal of arsenic, fluoride, and iron from drinking water using MOFs. Various aspects related to the synthesis, latest technologies adopted for the modifications in the synthesis process and advanced applications of MOFs for the removal of such contaminants are explicitly discussed. A detailed insight was provided to understand the mechanism of various interactions of MOFs with arsenic and fluoride. With respect to arsenic, fluoride, and iron removal the ultrastructural morphology of MOFs is assessed based on different molecular arrangements. Further, commercial aspects of various MOFs are presented in order to highlight the process feasibility. Finally, various perspectives and challenges involved in process scale up are comprehensively narrated with an aspiration of futuristic developments. The paper will be beneficial to the readers for acquiring a piece of in-depth knowledge on MOFs and its various synthesis approaches along with remarkable achievements for the removal of arsenic, fluoride, and iron from contaminated drinking water.

A Hybrid {Silk@Zirconium MOF} Material as Highly Efficient AsIII-sponge

Exposure of humans to Arsenic from groundwater drinking sources is an acute global public health problem, entailing the urgent need for highly efficient/low-cost Arsenite (As^III) up-taking materials. Herein we present an innovative hybrid-material, ZrMOF@SF_d operating like an “As^III-sponge” with unprecedented efficiency of 1800 mg As^III gr⁻¹. ZrMOF@SF_d consists of a neutral Zirconium Metal-Organic Framework [ZrMOF] covalently grafted on a natural silk-fiber (SF_d). ZrMOF itself exhibits As^III adsorption of 2200 mg gr⁻¹, which supersedes any -so far- known As^ΙΙΙ-sorbent. Using XPS, FTIR, BET-porosimetry data, together with theoretical Surface-Complexation-Modeling (SCM), we show that the high-As^ΙΙΙ-uptake is due to a sequence of two phenomena:[i] at low As^III-concentrations, surface-complexation of H₃AsO₃ results in As^III-coated voids of ZrMOF, [ii] at increased As^III-concentrations, the As^III-coated voids of ZrMOF are filled-up by H₃AsO₃via a partitioning-like mechanism. In a more general context, the present research exemplifies a mind-changing concept, i.e. that a “partitioning-like” mechanism can be operating for adsorption of metalloids, such as H₃AsO_3, by metal oxide materials. So far, such a mechanism has been conceptualized only for the uptake of non-polar organics by natural organic matter or synthetic polymers.