Visible light sensitizer-catalyzed highly selective photo oxidation from thioethers into sulfoxides under aerobic condition

Metal-Free Photoredox Catalyzed Sulfonylation of Phenylhydrazines with Thiols

The sulfonylation method stands out as a simple and efficient approach for synthesizing sulfonamides. Despite the advancements in constructing the sulfonamide framework, the potential use of phenyl hydrazine as an amination source remains unexplored. Herein, we report a metal-free, environment-friendly photoredox-catalyzed sulfonylation of phenylhydrazines using thiols, employing MeCN:H2O as a green solvent and eosin Y as a photoredox catalyst. This strategy exhibits a broad substrate scope and good functional group compatibility, including hetero(aryl) as well as aliphatic phenylhydrazines. Finally, this protocol also demonstrated good application for the synthesis of pharmaceutical analogues.

Photocatalyzed Aerobic Cross-Dehydrogenative Coupling of Diarylphosphine Oxides with Alcohols and Phenols

A photocatalytic cross-dehydrogenative coupling of diarylphosphine oxides with alcohols and phenols has been developed. Using organic dye Rose Bengal as the photocatalyst and air as the oxidant, the reaction proceeded smoothly at room temperature. Both alcohols and phenols were feasible, affording various organophosphinates in high yields. The absence of a halogenating reagent, the absence of a transition-metal catalyst, a green oxidant, and mild conditions make this strategy environmentally benign and sustainable. Mechanistic studies indicated that the reaction is enabled by the cooperation of photoredox catalysis and photosensitization.

Phenylbenzothiazole-Based Platinum(II) and Diplatinum(II) and (III) Complexes with Pyrazolate Groups: Optical Properties and Photocatalysis

Based on 2-phenylbenzothiazole (pbt) and 2-(4-dimethylaminophenyl)benzothiazole (Me2N-pbt), mononuclear [Pt(pbt)(R'2-pzH)2]PF6 (R'2-pzH = pzH 1a, 3,5-Me2pzH 1b, 3,5-iPr2pzH 1c) and diplatinum (PtII-PtII) [Pt(pbt)(μ-R'2pz)]2 (R'2-pz = pz 2a, 3,5-Me2pz 2b, 3,5-iPr2pz 2c) and [Pt(Me2N-pbt)(μ-pz)]2 (3a) complexes have been prepared. In the presence of sunlight, 2a and 3a evolve, in CHCl3 solution, to form the PtIII-PtIII complexes [Pt(R-pbt)(μ-pz)Cl]2 (R = H 4a, NMe2 5a). Experimental and computational studies reveal the negligible influence of the pyrazole or pyrazolate ligands on the optical properties of 1a-c and 2a,b, which exhibit a typical 3IL/3MLCT emission, whereas in 2c the emission has some 3MMLCT contribution. 3a displays unusual dual, fluorescence (1ILCT or 1MLCT/1LC), and phosphorescence (3ILCT) emissions depending on the excitation wavelength. The phosphorescence is lost in aerated solutions due to sensitization of 3O2 and formation of 1O2, whose determined quantum yield is also wavelength dependent. The phosphorescence can be reversibly photoinduced (365 nm, ∼ 15 min) in oxygenated THF and DMSO solutions. In 4a and 5a, the lowest electronic transitions (S1-S3) have mixed characters (LMMCT/LXCT/L'XCT 4a and LMMCT/LXCT/ILCT 5a) and they are weakly emissive in rigid media. The 1O2 generation property of complex 3a is successfully used for the photooxidation of p-bromothioanisol showing its potential application toward photocatalysis.

Incorporating a D-A-D-Type Benzothiadiazole Photosensitizer into MOFs for Photocatalytic Oxidation of Phenylsulfides and Benzylamines

Oxidation and removal of highly toxic sulfides and amines are particularly important for environmental and human security but remain challenging. Here, incorporating an excellent photosensitizer, donor-acceptor-donor (D-A-D)-type 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic (H2L), into metal-organic frameworks (MOFs) has been manifested to promote the charge separation, affording four three-dimensional (3D) MOFs (isostructural 1-Co/1-Zn with Co2/Zn2 units, and 2-Gd/2-Tb with Gd/Tb-cluster chains) as photocatalysts in the visible light-driven air-O2-mediated catalytic oxidation and removal of hazardous phenylsulfides and benzylamines. Impressively, structure-property correlation illustrated that the transition metal centers assembled in MOFs play an important role in the photocatalytic activity, and we can conclude that 1-Zn can be a robust heterogeneous catalyst possessing good light adsorption and fast charge separation in oxidation removal reactions of both benzylamines and phenylsulfides under visible light irradiation and room temperature with excellent activity/selectivity, stability, and reusability.

Exceptional Light Sensitivity by Thiol-Ene Click Lithography

Lithographic patterning, which utilizes the solubility switch of photoresists to convert optical signals into nanostructures on the substrate, is the primary top-down approach for nanoscale fabrication. However, the low light/electron-energy conversion efficiency severely limits the throughput of lithography. Thiol-ene reaction, as a photoinitiated radical addition reaction, is widely known as click reaction in the field of chemistry due to its extremely high efficiency. Here, we introduce a click lithography strategy utilizing the rapid thiol-ene click reaction to realize ultraefficient nanofabrication. This novel approach facilitated by the implementation of ultrahigh-functionality material designs enables high-contrast patterning of metal-containing nanoclusters under an extremely low deep-ultraviolet exposure dose, e.g., 7.5 mJ cm^-2, which is 10-20 times lower than the dose used in the photoacid generator-based photoresist system. Meanwhile, 45 nm dense patterns were also achieved at a low dose using electron beam lithography, revealing the great potential of this approach in high-resolution patterning. Our results demonstrated the high-sensitivity and high-resolution features of click lithography, providing inspiration for future lithography design.

Tunable Photocatalytic Selectivity by Altering the Active Center Microenvironment of an Organic Polymer Photocatalyst

The favored production of one product over another is a major challenge in synthetic chemistry, reducing the formation of byproducts and enhancing atom efficacy. The formation of catalytic species that have differing reactivities based on the substrate being converted, has been targeted to selectively control reactions. Here, we report the production of photocatalytic self-assembled amphiphilic polymers, with either hydrophilic or hydrophobic microenvironments at the reactive center. Benzothiadiazole-based photocatalysts were polymerized into either the hydrophilic or the hydrophobic compartment of a diblock copolymer by RAFT polymerization. The difference in the reactivity of each microenvironment was dictated by the physical properties of the substrate. Stark differences in reactivity were observed for polar substrates, where a hydrophilic microenvironment was favored. Conversely, both microenvironments performed similarly for very hydrophobic substrates, showing that reagent partitioning is not the only factor that drives photocatalytic conversion. Furthermore, the use of secondary swelling solvents allowed an additional reagent exchange between the continuous phase and the heterogeneous photocatalyst, resulting in a significant 5-fold increase in conversion for a radical carbon-carbon coupling.

KuQuinone as a Highly Stable and Reusable Organic Photocatalyst in Selective Oxidation of Thioethers to Sulfoxides

A chemoselective photocatalytic system to perform thioether oxidation to sulfoxide is presented. The light-induced oxidation process is here promoted by a metal-free quinoid catalyst, namely 1-hexylKuQuinone (KuQ). Reactions performed in a fluorinated solvent (i.e., HFIP), using O₂ as the oxidant, at room temperature, lead to complete thioanisole conversion to methyl phenyl sulfoxide in 60 min. Remarkably, the system can be recharged and recycled without a loss of activity and selectivity, reaching turnover numbers (TONs) higher than 4000. Excellent catalytic performances and full selectivity have also been obtained for the photocatalytic oxidation of substituted thioanisole derivatives, aliphatic, cyclic, and diaryl thioethers. Likewise, the oxidation of heteroaromatic organosulfur compounds can be accomplished, with longer reaction times.

A sustainable photochemical aerobic sulfide oxidation: access to sulforaphane and modafinil

Sulfoxide-containing molecules are an important class of compounds in the pharmaceutical industry and many efforts have been made to develop new and green protocols, targeting the chemoselective transformation of sulfides into sulfoxides. Photochemistry is a rapidly expanding research field employing light as the energy source. Photochemical aerobic processes possess additional advantages to photochemistry and may find applications in the chemical industries. Herein, a 370 nm catalyst-free aerobic protocol was developed, using 2-Me-THF as the green solvent. At the same time, two low-catalyst-loading anthraquinone-based processes (under a CFL lamp or 427 nm irradiation) in 2-Me-THF were developed. Furthermore, a broad range of substrates was tested. We also implemented our protocols towards the synthesis of the pharmaceutical active ingredients (APIs) sulforaphane and modafinil.

Synthesis of Enantiopure Sulfoxides by Concurrent Photocatalytic Oxidation and Biocatalytic Reduction

The concurrent operation of chemical and biocatalytic reactions in one pot is still a challenging task, and, in particular for chemical photocatalysts, examples besides simple cofactor recycling systems are rare. However, especially due to the complementary chemistry that the two fields of catalysis promote, their combination in one pot has the potential to unlock intriguing, unprecedented overall reactivities. Herein we demonstrate a concurrent biocatalytic reduction and photocatalytic oxidation process. Specifically, the enantioselective biocatalytic sulfoxide reduction using (S)-selective methionine sulfoxide reductases was coupled to an unselective light-dependent sulfoxidation. Protochlorophyllide was established as a new green photocatalyst for the sulfoxidation. Overall, a cyclic deracemization process to produce nonracemic sulfoxides was achieved and the target compounds were obtained with excellent conversions (up to 91 %) and superb optical purity (>99 % ee).

Synthesis of Enantiopure Sulfoxides by Concurrent Photocatalytic Oxidation and Biocatalytic Reduction

The concurrent operation of chemical and biocatalytic reactions in one pot is still a challenging task, and, in particular for chemical photocatalysts, examples besides simple cofactor recycling systems are rare. However, especially due to the complementary chemistry that the two fields of catalysis promote, their combination in one pot has the potential to unlock intriguing, unprecedented overall reactivities. Herein we demonstrate a concurrent biocatalytic reduction and photocatalytic oxidation process. Specifically, the enantioselective biocatalytic sulfoxide reduction using (S)‐selective methionine sulfoxide reductases was coupled to an unselective light‐dependent sulfoxidation. Protochlorophyllide was established as a new green photocatalyst for the sulfoxidation. Overall, a cyclic deracemization process to produce nonracemic sulfoxides was achieved and the target compounds were obtained with excellent conversions (up to 91 %) and superb optical purity (>99 % ee).

Catalytic aerobic photooxidation of triarylphosphines using dibenzo-fused 1,4-azaborines

Although dibenzo-fused 1,4-heteroaromatics are utilized as strongly reducing photocatalysts in organic synthesis and polymerization, they have rarely been employed in catalytic photooxidation. Moreover, to date, their boron-analogs, dibenzo-fused 1,4-azaborines (DBABs), have not been applied in photocatalysis despite their promising potential as photocatalysts. Accordingly, herein, aerobic photooxidation of triarylphosphines (Ar₃P) was performed using DBABs as photocatalysts. The reaction smoothly proceeded in an aprotic solvent, and phosphine oxides were obtained in appropriate yields. Density functional theory calculations suggested that DBAB captured and activated phosphadioxirane intermediates, which were generated by the interaction of Ar₃P with ¹O₂, at the Lewis acidic boron center.

Aerobic Photocatalysis: Oxidation of Sulfides to Sulfoxides

Sulfoxides constitute one of the most important functional groups in organic chemistry found in numerous pharmaceuticals and natural products. Sulfoxides are usually obtained from the oxidation of the corresponding sulfides. Among various oxidants, oxygen or air are considered the greenest and most sustainable reagent. Photochemistry and photocatalysis is increasingly applied in new, as well as traditional, yet demanding, reaction, like the aerobic oxidation of sulfides to sulfoxides, since photocatalysis has provided the means to access them in mild and effective ways. In this review, we will summarize the photochemical protocols that have been developed for the oxidation of sulfides to sulfoxides, employing air or oxygen as the oxidant. The aim of this review is to present: i) a historical overview, ii) the key mechanistic studies and proposed mechanisms and iii) categorize the different catalytic systems in literature.

A nitrogen-based chiral catenane for enantioenriching photocatalytic aerobic oxidation

Tröger's base's chirality merges catenanes’ photosensitizing characteristics to introduce the first nitrogen-based chiral hetero[2]catenane that proceeds enantioenriching photocatalytic aerobic oxidations.

Enhancing the quantum yield of singlet oxygen: photocatalytic degradation of mustard gas simulant 2-chloroethyl ethyl sulfide catalyzed by a hybrid of polyhydroxyl aluminum cations and porphyrin anions

By combining the anionic salt meso-tetra(4-carboxyphenyl)porphyrin (TCPP⁴⁻) and the Keggin polyoxometalate cation cluster [Al₁₃O₄(OH)₂₄(H₂O)₁₂]⁷⁺via a simple ion-exchange method, a hybrid (C₄₈H₂₆N₄O₈)[Al₁₃O₄(OH)₂₄(H₂O)₁₂]₂(OH)₁₀·18H₂O (Al₁₃–TCPP) was prepared and thoroughly characterized as a prototype of polyoxometalate–porphyrin hybrids for the photocatalytic degradation of the mustard gas simulant 2-chloroethyl ethyl sulfide (CEES). The experimental results showed that the catalytic degradation rate of CEES in the presence of Al₁₃–TCPP reached 96.16 and 99.01% in 180 and 90 min in methanol and methanol–water solvent mixture (v/v = 1 : 1), respectively. The reaction followed first-order reaction kinetics, and the half-life and kinetic constant in methanol and solvent mixture were 39.8 min, −0.017 min⁻¹ and 14.7 min, −0.047 min⁻¹. Mechanism analysis indicated that under visible light irradiation in air, CEES was degraded through a combination of oxidation and alcoholysis/hydrolysis in methanol and the methanol–water solvent mixture. The superoxide radical (O₂˙⁻) and singlet molecular oxygen (¹O₂) generated by Al₁₃–TCPP selectively oxidized CEES into a non-toxic sulfoxide. The singlet oxygen capture experiments showed that Al₁₃–TCPP (Φ = 0.236) had a higher quantum yield of singlet oxygen generation than H₄TCPP (Φ = 0.135) under visible light irradiation in air. The material Al₁₃–TCPP has good reusability, and the degradation rate of CEES can still reach 98.37% after being recycled five times.

A hybrid Al₁₃–TCPP was thoroughly characterized as a prototype of polyoxometalate–porphyrin hybrids for the photocatalytic degradation of the mustard gas simulant 2-chloroethyl ethyl sulfide (CEES).

Electrochemical oxygenation of sulfides with molecular oxygen or water: switchable preparation of sulfoxides and sulfones

A practical and eco-friendly method for the controllable aerobic oxygenation of sulfides by electrochemical catalysis was developed. The switchable preparation of sulfoxides and sulfones was effectively controlled by reaction time, in which both molecular oxygen and water can be used as the oxygen source under catalyst and external oxidant-free conditions. The electrochemical protocol features a broad substrate scope and excellent site selectivity and is successfully applied to the modification of some sulfide-containing pharmaceuticals and their derivatives.

A visible-light-induced thiol addition/aerobic oxidation cascade reaction of epoxides and thiols for the synthesis of β-hydroxylsulfoxides

A photochemical thiol addition/aerobic oxidation cascade reaction has been developed. This protocol enables efficient oxidative coupling of epoxides and thiols to access structurally valuable β-hydroxylsulfoxides. A broad range of functional groups are compatible to obtain moderate to good yields of the target products. Mechanistic studies revealed a sequential reaction pathway involving base-promoted thiol addition of thiols to epoxides and visible-light-induced aerobic oxygenation of thioethers.

Direct 3-Acylation of Indolizines by Carboxylic Acids for the Practical Synthesis of Red Light-Releasable Caged Carboxylic Acids

To enhance the practicality of photouncaging system using 3-acyl-2-methoxyindolizines, direct acylation of indolizines with carboxylic acids was developed using condensation reagents, generally used for peptide coupling. This method allowed for caging a broad range of carboxylic acids with indolizines. The method enabled a facile synthesis of water-soluble caged bioactive carboxylic acids having an intramolecular photosensitizer. The efficient release of carboxylic acids from the synthesized caged compounds upon red light irradiation was confirmed in neutral buffered solutions.

Photooxidation Responsive Elastin-Like Polypeptide Conjugates for Photodynamic Therapy Application

Stimuli-responsive recombinant elastin-like polypeptides (ELPs) are artificial protein polymers derived from the hydrophobic domain of tropoelastin that have attracted significant interest for drug delivery and tissue engineering applications. In the present study, we have conjugated a photosensitizer (PS) to a hydrophobic methionine-containing ELP scaffold, which upon reaction with singlet oxygen (¹O₂) is transformed into a hydrophilic sulfoxide derivative facilitating the disassembly of photosensitizer-delivery particles during the photodynamic therapy (PDT) process. A peripherally substituted carboxy-Zn(II)-phthalocyanine derivative (TT1) bearing a carboxyl group directly linked to the Pc-ring, and presenting an absorption maximum around 680 nm, was selected as PS which simultaneously acted as a photooxidation catalyst. A TT1-ELP[M₁V₃-40] conjugate was prepared from ELP[M₁V₃-40] modified with an alkyne group at the N-terminal chain end, and from TT1-amide-C3-azide by copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) reaction. This innovative model photooxidation sensitive PS delivery technology offers promising attributes in terms of temperature-controlled particle formation and oxidation-triggered release, narrow molar mass distribution, reproducibility, scalability, non-immunogenicity, biocompatibility, and biodegradability for pharmaceutical applications in an effort to improve the clinical effectiveness of PDT treatments.

Thioxanthone: a powerful photocatalyst for organic reactions

Photoorganocatalysis has been recognised by the organic chemistry community as an important part of photochemistry and catalysis. In general, aromatic ketones constitute key players in this type of catalysis as they are involved in a plethora of examples in the literature. Among the various aromatic ketones, thioxanthone (TX) seems to play a unique role in photochemistry. In comparison with other aromatic ketones, TX has a high triplet energy and a relatively long triplet lifetime, while it has the ability to participate successfully in merger reactions with metal complexes. In this review, we will discuss the photophysical properties of this small organic molecule, as well as the numerous examples of photochemical reactions, where it is employed as a mediator and more specifically in polymerisation reactions, and organic transformations.

Photooxidation of thiosaccharides mediated by sensitizers in aerobic and environmentally friendly conditions

A series of β-d-glucopyranosyl derivates have been synthesized and evaluated in photooxidation reactions promoted by visible light and mediated by organic dyes under aerobic conditions. Among the different photocatalysts employed, tetra-O-acetyl riboflavin afforded chemoselectively the respective sulfoxides, without over-oxidation to sulfones, in good to excellent yields and short reaction times. This new methodology for the preparation of synthetically useful glycosyl sulfoxides constitutes a catalytic, efficient, economical, and environmentally friendly oxidation process not reported so far for carbohydrates.

Photochemical Synthesis of 1,4-Dicarbonyl Bifluorene Compounds via Oxidative Radical Coupling Using TEMPO as the Oxygen Atom Donor

A visible-light-induced metal-free synthesis of 1,4-dicarbonyl compounds from alkyne-containing aryl iodides via photochemical C-I bond cleavage, intramolecular cyclization, oxidation, and intermolecular radical coupling sequence is reported. TEMPO was employed as the oxygen atom donor in this transformation. This protocol provided a new strategy for the synthesis of 1,4-dicarbonyl bifluorene compounds.

Preparation of Chiral Photosensitive Organocatalysts and Their Application for the Enantioselective Synthesis of 1,2-Diamines

Chiral phosphoric acid based organocatalysis and visible-light photocatalysis have both emerged as promising technologies for the sustainable production of fine chemicals. In this context, we have envisioned the design and the synthesis of a new class of chimeric catalytic entities that would feature both catalytic capabilities. Given their multitask nature, such catalysts would be particularly attractive for the development of new catalytic transformations, tandem processes in particular. Toward this goal, several BINOL-based chiral phosphoric acid backbones presenting one or two visible-light-sensitive thioxanthone moieties have been prepared and studied. The utility of these new photoactive chiral organocatalysts is then demonstrated in the enantioselective tandem three-component electrophilic amination of enecarbamates. Of note, the C₁-symmetric organo/photocatalyst has shown a better catalytic activity than those presenting a C₂ symmetry.

Insights into the degradation chemistry of tazarotene, a third generation acetylenic retinoid: LC-HRMS (Orbitrap), LC-MSn and NMR characterization of its degradation products, and prediction of their physicochemical and ADMET properties

Tazarotene is a prodrug that belongs to the acetylenic class of retinoids. The drug was subjected to hydrolytic, oxidative and photolytic stress testing to establish its comprehensive degradation chemistry. The drug proved to be unstable under acidic and basic hydrolytic conditions, yielding tazarotenic acid, which is a known major degradation product (DP) and an active metabolite. Additionally, two DPs each were generated upon interaction of drug and tazarotenic acid with HCl, used as an acid stressor. These were experimentally proven as pseudo DPs, as they did not originate when H₂SO₄ was employed as the stressor. The drug was also unstable under oxidative and photolytic conditions, yielding six DPs. All the products were separated on reversed phase (C18) column, using mobile phase composed of 10 mM ammonium formate (pH 3.5) and acetonitrile, which was run in a gradient mode. The separated DPs were subjected to LC-HRMS and LC-MSⁿ studies for their initial characterization. Seven hydrolytic and oxidative DPs that could be isolated using semi-preparative column were subjected to extensive 1D (¹H, ¹³C and DEPT-135) and 2D (COSY, HSQC and HMBC) NMR studies to confirm their structures. In total, five novel DPs were characterized, apart from two previously reported DPs, viz., tazarotenic acid and tazarotene sulfoxide, and four additional pseudo DPs. The complete degradation pathway of the drug was established. In silico ADMET properties of the drug and its DPs were evaluated using ADMET Predictor™.

Electrochemical Synthesis of Sulfinic Esters via Aerobic Oxidative Esterification of Thiophenols with Alcohols

A method for the electrochemical synthesis of sulfinic esters by aerobic oxidative coupling of thiophenols and alcohols has been developed. Using electrons as the redox reagent and O2 in air as the oxygen source, the reactions proceeded smoothly at room temperature, even for a gram-scale preparation. No use of catalyst, clean redox reagent, green and abundant oxygen source, and mild reaction conditions make this strategy eco-friendly.

Synthesis of an anthraquinone-containing polymeric photosensitizer and its application in aerobic photooxidation of thioethers

Work on the synthesis of a polymeric photosensitizer and its application in the photooxidation of thioethers is reported herein. Firstly, the polymeric photosensitizer was designed and synthesized by the reaction of anthraquinone-2-carbonyl chloride (AQ-2-COCl) with poly(2-hydroxyethyl methacrylate) (PHEMA). Then, the visible light-induced photooxidation of thioethers under aerobic conditions was investigated. The results revealed that the reaction yielded sulfoxides highly chemoselectively in excellent yields with good substrate tolerance. Importantly, AQ-PHEMA could be easily recovered and reused more than 20 times without significant loss of the catalytic activity.

Work on the synthesis of a polymeric photosensitizer and its application in the photooxidation of thioethers is reported herein.

Visible-light photocatalytic aerobic oxidation of sulfides to sulfoxides with a perylene diimide photocatalyst

Photosensitized oxygenation has been recognised as a modern method of incorporating oxygen into a substrate, as it offers environmentally benign alternatives to several conventional synthetic procedures. A metal-free aerobic selective sulfoxidation photosensitized by a perylene diimide photocatalyst has been developed. The reaction utilizes visible light as the driving force and molecular oxygen as the oxidant. The advantages of the developed method include high efficiency and selectivity, extremely simple operation and work-up procedure, mild reaction conditions, and practical application in late-stage functionalization.

Efficient Generation of Singlet Oxygen and Photooxidation of Sulfide into Sulfoxide via Tuning the Ancillary of Bicyclometalated Iridium(III) Complexes

With 2-phenylquinoline (pq) as a cyclometalated ligand, a series of cationic Ir(III) complexes [Ir(pq)₂(L1)₂](PF₆) (L1 is pyridine (1a), 4-methoxypyridine (1b), 4-dimethylaminopyridine (1c), and 4-acetylpyridine (1d)) and [Ir(pq)₂(L2)](PF₆) (L2 is 2,2'-bipyridine (1e), 2,2'-bipyrimidyl (1f), 4,4'-dimethyl-2,2'-bipyridine (1g), and 4,4'-dimethoxy-2,2'-bipyridine (1h)) were synthesized and characterized. The influence of the metal-based highest occupied molecular orbital on triplet-state lifetime, triplet-state quantum yield, and ¹O₂ generation quantum yield as well as aerobic photo-oxidation of sulfide into sulfoxide was evaluated via tuning the ancillary ligand of Ir(pq)₂ complexes. The results revealed that 1h with chelate ancillary ligand bearing electron-donating group possesses a high ¹O₂ generation quantum yield (0.90) and photocatalytic activity for sulfide oxidation with high chemoselectivity and a low catalyst loading (0.5 mol %) under mild conditions. Moreover, one-pot two-step procedure for preparation of enantiopure sulfoxides, including aerobic photo-oxidation of sulfide using 1h as a photosensitizer and chiral resolution of sulfoxide via a chiral-at-metal strategy, was also developed.

Oxidative Deprotection of p-Methoxybenzyl Ethers via Metal-Free Photoredox Catalysis

An efficient and greener deprotection method for p-methoxybenzyl (PMB) ethers using a metal-free visible light photoredox catalyst and air and ammonium persulfate as the terminal oxidants is presented. Various functional groups and protecting groups were tolerated in the developed method to achieve good to excellent yields in short reaction times. Significantly, the developed method was compatible with PMB ethers derived from primary, secondary, and tertiary alcohols and a gram-scale reaction. Mechanistic studies support a proposed reaction mechanism that involves single electron oxidation of the PMB ether.

Polymer-supported eosin Y as a reusable photocatalyst for visible light mediated organic transformations

Rapid synthesis of highly stable polymer-supported eosin Y for visible light-driven photoxidation of thioethers to sulfoxides and phenylboronic acids to phenols.

Visible light driven, nickel-catalyzed aryl esterification using a triplet photosensitiser thioxanthen-9-one

The nickel-catalyzed esterification of carboxylic acids with aryl bromides using thioxanthen-9-one as a photosensitizer provided aryl esters with excellent yields.

Visible-Light-Induced Organic Photochemical Reactions through Energy-Transfer Pathways

Visible-light photocatalysis is a rapidly developing and powerful strategy to initiate organic transformations, as it closely adheres to the tenants of green and sustainable chemistry. Generally, most visible-light-induced photochemical reactions occur through single-electron transfer (SET) pathways. Recently, visible-light-induced energy-transfer (EnT) reactions have received considerable attentions from the synthetic community as this strategy provides a distinct reaction pathway, and remarkable achievements have been made in this field. In this Review, we highlight the most recent advances in visible-light-induced EnT reactions.