Synthesis and characterization of monodispersed water dispersible Fe3O4 nanoparticles and in vitro studies on human breast carcinoma cell line under hyperthermia condition

An Advanced Thermal Decomposition Method to Produce Magnetic Nanoparticles with Ultrahigh Heating Efficiency for Systemic Magnetic Hyperthermia

Due to the limited heating efficiency of available magnetic nanoparticles, it is difficult to achieve therapeutic temperatures above 44 °C in relatively inaccessible tumors during magnetic hyperthermia following systemic administration of nanoparticles at clinical dosage (≤10 mg kg-1 ). To address this, a method for the preparation of magnetic nanoparticles with ultrahigh heating capacity in the presence of an alternating magnetic field (AMF) is presented. The low nitrogen flow rate of 10 mL min-1 during the thermal decomposition reaction results in cobalt-doped nanoparticles with a magnetite (Fe3 O4 ) core and a maghemite (γ-Fe2 O3 ) shell that exhibit the highest intrinsic loss power reported to date of 47.5 nH m2 kg-1 . The heating efficiency of these nanoparticles correlates positively with increasing shell thickness, which can be controlled by the flow rate of nitrogen. Intravenous injection of nanoparticles at a low dose of 4 mg kg-1 elevates intratumoral temperatures to 50 °C in mice-bearing subcutaneous and metastatic cancer grafts during exposure to AMF. This approach can also be applied to the synthesis of other metal-doped nanoparticles with core-shell structures. Consequently, this method can potentially be used for the development of novel nanoparticles with high heating performance, further advancing systemic magnetic hyperthermia for cancer treatment.

Development of Core@Shell γ-Fe2O3@MnxOy@SiO2 Nanoparticles for Hyperthermia, Targeting, and Imaging Applications

Monodispersed core@shell γ-Fe₂O₃@Mn_xO_y nanoparticles have been prepared through thermolysis of iron and manganese oleate. Further, these prepared nanoparticles are coated with biocompatible substances such as silica and polyethylene glycol. These particles are highly biocompatible for different cell lines such as normal and cancer cell lines. The nanoparticles are used as hyperthermia agents, and successful hyperthermia treatment in cancer cells is carried out. As compared to γ-Fe₂O₃@SiO₂, γ-Fe₂O₃@Mn_xO_y@SiO₂ shows the enhanced killing of cancer cells through hyperthermia. In order to make them potential candidates for targeting to cancer cells, folic acid (FA) is tagged to the nanoparticles. Fluorescein isothiocyanate (FITC) is also tagged onto these nanoparticles for imaging. The developed γ-Fe₂O₃@Mn_xO_y@SiO₂ nanoparticle can act as a single entity for therapy through AC magnetic field, imaging through FITC and targeting through folic acid simultaneously. This is the first report on this material, which is highly biocompatible for hyperthermia, imaging, and targeting.

Self-Assembled Artificial Nanocilia Actuators

Self-assembly of nanoparticles (NPs) is a powerful route to constructing higher-order structures. However, the programmed self-assembly of NPs into non-close-packed, 3D, shape-morphing nanocilia arrays remains elusive, whereas dynamically actuated nanometer cilia are universal in living systems. Here, a programmable self-assembly strategy is presented that can direct magnetic NPs into a highly ordered responsive artificial nanocilia actuator with exquisite nanometer 3D structural arrangements. The self-assembled artificial NP cilia can maintain their structural integrity through the interplay of interparticle interactions. Interestingly, the nanocilia can exhibit a field-responsive actuation motion through "rolling and sliding" between assembled NPs rather than bending the entire ciliary beam. It is demonstrated that oleic acid coated over the NPs acts as a lubricating bearing and enables the rolling/sliding-based actuation of the cilia.

Mesoporous Silica-Coated Upconversion Nanoparticles Assisted Photodynamic Therapy Using 5-Aminolevulinic Acid: Mechanistic and In Vivo Studies

Exclusively red-emitting upconversion nanoparticles (UCNPs) with the composition NaErF₄:0.5%Tm as a core and NaYF₄ as a shell were synthesized for performing photodynamic therapy (PDT). A possible mechanism was proposed for core-shell UCNPs formation. For loading a maximum amount of 5-aminolevulinic acid (5-ALA), mesoporous silica coating was performed on UCNPs. Studies under dark conditions confirmed the biocompatibility of 5-ALA-loaded UCNPs formulation (UCNPs-5-ALA) with MCF-7 cells. Meanwhile, studies under light-exposed conditions exhibited effective cytotoxicity against MCF-7 cells. Studies employing D₂O-based cell cultured media and addition of DABCO in cell culture established that the cell death was due to oxidation of cellular components by reactive oxygen species (ROS) triggering the apoptosis. The formation of ROS was confirmed by DCF(H)DA-based ROS analysis via fluorescence microscopy to demonstrate the ROS production, which mediates the programmed cell death. Additionally, we have validated the apoptosis in MCF-7 cells with flow cytometry analyses. This was further confirmed by an electrophoretic mobility shift assay on nuclear extract and measurement of mitochondrial membrane potential. In the case of animal model studies, the formulation UCNPs-5-ALA without irradiation (980 nm) did not possess any in vivo cytotoxicity on tumor-induced SCID mice and there was a minimum migration of UCNPs-5-ALA to the vital organs but maximum retention at the tumor site only. Meanwhile, only the mice treated with UCNPs-5-ALA and irradiated on the tumor region with 980 nm laser (500 mW) for 20 min possessed a tumor with a size reduced to about 75% as compared with the corresponding control groups. To the best of our knowledge, this type of study was conducted for the first time employing exclusively red-emitting phosphors for effective PDT.

Regioselective installation of enolizable ketones and unprotected mercaptoacetic acid into olefins using GO as a phase transfer catalyst

Unprecedented regioselective conjugate addition of enolizable ketones and unprotected mercaptoacetic acid to electron poor alkenes using GO as a phase transfer catalyst is reported in excellent yield of products (up to 92%) and recyclability of the catalyst up to five times.

Brilliant Nonlinear Optical Response of Ho3+ and Yb3+ Activated YVO4 Nanophosphor and Its Conjugation with Fe3O4 for Smart Anticounterfeit and Hyperthermia Applications

YVO4:Ho3+/Yb3+ nanophosphors prepared by an effective polyol-mediated route show dual-mode behavior in photoluminescence. Upon 980 nm excitation, the upconversion red emission spectrum exhibits a bright red peak at ∼650 nm, characteristic of the electronic transition of the Ho3+ ion via involvement of two-photon absorption, which has been confirmed by the power-dependent luminescence study. Moreover, at 300 nm excitation, downconversion emission peaks are observed at 550, 650, and ∼755 nm. The nonradiative resonant energy transfer occurs from the V-O charge transfer band to Ho3+ ions, resulting in an improved emission of Ho3+ ions. Moreover, polyethylene glycol-coated nanoparticles make it suitable for water dispersibility; and these particles are conjugated with Fe3O4 nanoparticles to form magnetic-luminescent hybrid nanoparticles. Highly water-dispersible magnetic-luminescent hybrid material attained the hyperthermia temperature (∼42 °C) under an applied AC magnetic field. The specific absorption rate value is found to be high (138 W/g), which is more than that of pure superparamagnetic Fe3O4 nanoparticles. At 300 nm excitation, the high quantum yield value of ∼27% is obtained from YVO4:Ho3+/Yb3+, which suggests that it is a good phosphor material. By employing the neutron activation analysis technique, it is shown that nanophosphor particles can absorb Au3+ up to the ppm level. Interestingly, such nanophosphor also shows the potentiality for anticounterfeiting applications.

Magnetic Nanoparticles to Unique DNA Tracers: Effect of Functionalization on Physico-chemical Properties

To monitor and manage hydrological systems such as brooks, streams, rivers, the use of tracers is a well-established process. Limited number of potential tracers such as salts, isotopes and dyes, make study of hydrological processes a challenge. Traditional tracers find limited use due to lack of multiplexed, multipoint tracing and background noise, among others. In this regard, DNA based tracers possess remarkable advantages including, environmentally friendly, stability, and high sensitivity in addition to showing great potential in the synthesis of ideally unlimited number of unique tracers capable of multipoint tracing. To prevent unintentional losses in the environment during application and easy recovery for analysis, we hereby report DNA encapsulation in silica containing magnetic cores (iron oxide) of two different shapes-spheres and cubes. The iron oxide nanoparticles having size range 10-20 nm, have been synthesized using co-precipitation of iron salts or thermal decomposition of iron oleate precursor in the presence of oleic acid or sodium oleate. Physico-chemical properties such as size, zeta potential, magnetism etc. of the iron oxide nanoparticles have been optimized using different ligands for effective binding of dsDNA, followed by silanization. We report for the first time the effect of surface coating on the magnetic properties of the iron oxide nanoparticles at each stage of functionalization, culminating in silica shells. Efficiency of encapsulation of three different dsDNA molecules has been studied using quantitative polymerase chain reaction (qPCR). Our results show that our DNA based magnetic tracers are excellent candidates for hydrological monitoring with easy recoverability and high signal amplification.

Assessing magnetic and inductive thermal properties of various surfactants functionalised Fe3O4 nanoparticles for hyperthermia

This work reports the fabrication of magnetite (Fe₃O₄) nanoparticles (NPs) coated with various biocompatible surfactants such as glutamic acid (GA), citric acid (CA), polyethylene glycol (PEG), polyvinylpyrrolidine (PVP), ethylene diamine (EDA) and cetyl-trimethyl ammonium bromide (CTAB) via co-precipitation method and their comparative inductive heating ability for hyperthermia (HT) applications. X-ray and electron diffraction analyses validated the formation of well crystallined inverse spinel structured Fe₃O₄ NPs (crystallite size of ~ 8–10 nm). Magnetic studies confirmed the superparamagnetic (SPM) behaviour for all the NPs with substantial magnetisation (63–68 emu/g) and enhanced magnetic susceptibility is attributed to the greater number of occupations of Fe²⁺ ions in the lattice as revealed by X-ray photoelectron spectroscopy (XPS). Moreover, distinctive heating response (specific absorption rate, SAR from 130 to 44 W/g) of NPs with similar size and magnetisation is observed. The present study was successful in establishing a direct correlation between relaxation time (~ 9.42–15.92 ns) and heating efficiency of each surface functionalised NPs. Moreover, heat dissipated in different surface grafted NPs is found to be dependent on magnetic susceptibility, magnetic anisotropy and magnetic relaxation time. These results open very promising avenues to design surface functionalised magnetite NPs for effective HT applications.

In vitro hyperthermic effect of magnetic fluid on cervical and breast cancer cells

Self-regulating temperature-controlled nanoparticles such as Mn–Zn ferrite nanoparticles based magnetic fluid can be a better choice for magnetic fluid hyperthermia because of its controlled regulation of hyperthermia temperature window of 43–45 °C. To test this hypothesis magnetic fluid with said properties was synthesized, and its effect on cervical and breast cancer cell death was studied. We found that the hyperthermia window of 43–45 °C was maintained for one hour at the smallest possible concentration of 0.35 mg/mL without altering the magnetic field applicator parameters. Their hyperthermic effect on HeLa and MCF7 was investigated at the magnetic field of 15.3 kA/m and frequency 330 kHz, which is close to the upper safety limit of 5 * 10⁹ A/m s. We have tested the cytotoxicity of synthesized Mn–Zn ferrite fluid using MTT assay and the results were validated by trypan blue dye exclusion assay that provides the naked eye microscopic view of actual cell death. Since cancer cells tend to resist treatment and show re-growth, we also looked into the effect of multiple sessions hyperthermia using a 24 h window till 72 h using trypan blue assay. The multiple sessions of hyperthermia showed promising results, and it indicated that a minimum of 3 sessions, each of one-hour duration, is required for the complete killing of cancer cells. Moreover, to simulate an in vivo cellular environment, a phantom consisting of magnetic nanoparticles dispersed in 1 and 5% agarose gel was constituted and studied. These results will help to decide the magnetic fluid based hyperthermic therapeutic strategies using temperature-sensitive magnetic fluid.

Magnetic Hyperthermia for Cancer Treatment: Main Parameters Affecting the Outcome of In Vitro and In Vivo Studies

Magnetic hyperthermia (MHT) is being investigated as a cancer treatment since the 1950s. Recent advancements in the field of nanotechnology have resulted in a notable increase in the number of MHT studies. Most of these studies explore MHT as a stand-alone treatment or as an adjuvant therapy in a preclinical context. However, despite all the scientific effort, only a minority of the MHT-devoted nanomaterials and approaches made it to clinical context. The outcome of an MHT experiment is largely influenced by a number of variables that should be considered when setting up new MHT studies. This review highlights and discusses the main parameters affecting the outcome of preclinical MHT, aiming to provide adequate assistance in the design of new, more efficient MHT studies.

Effect of Fe3O4 nanoparticles on germination of seeds and concentration of elements in Helianthus annuus L. under constant magnetic field

The aim of the study was to investigate the effect of the Fe₃O₄ nanoparticles (Fe-NPs) on the germination of sunflower seeds, early growth of seedlings and the concentration of selected elements in seedlings. The influence of constant magnetic fields in systems with and without Fe-NPs was investigated. Experiments were done on seeds subjected to germination under constant magnetic field (0 (control), 5, 25 and 120 mT) for 7 days in the presence of solution containing 0, 50 or 500 ppm Fe-NPs. No significant effect of Fe-NPs and the magnetic field on germination of seeds and the growth of seedlings has been demonstrated. In most cases, a decrease in germination parameters was observed. For the majority of samples the relative decrease in the concentrations of elements was demonstrated mainly for samples without Fe-NPs. Interestingly, a significant decrease in the concentrations of trivalent (including iron - Fe) and toxic elements in samples containing Fe-NPs in relation to control samples was observed. The authors suggest that in this case the binding (adsorption) of these elements in the roots and seeds of the sunflower by Fe-NPs took place. This explains the lower iron content in seedlings than in seeds prior to sowing.

The synthesis of rare earth metal-doped upconversion nanoparticles coated with d-glucose or 2-deoxy-d-glucose and their evaluation for diagnosis and therapy in cancer

Silica coated NaY_0.8Yb_0.16Tm_0.04F₄ NPs functionalized with d-glucose or 2-deoxy-d-glucose were prepared. Cytotoxicity and uptake studies on MCF-7 cells revealed the potential of formulation in bioimaging, therapy.

Recent Advances in Magnetite Nanoparticle Functionalization for Nanomedicine

Functionalization of nanomaterials can enhance and modulate their properties and behaviour, enabling characteristics suitable for medical applications. Magnetite (Fe3O4) nanoparticles are one of the most popular types of nanomaterials used in this field, and many technologies being already translated in clinical practice. This article makes a summary of the surface modification and functionalization approaches presented lately in the scientific literature for improving or modulating magnetite nanoparticles for their applications in nanomedicine.

Magnetic Iron Oxide Nanoparticles: Synthesis, Characterization and Functionalization for Biomedical Applications in the Central Nervous System

Magnetic Nanoparticles (MNPs) are of great interest in biomedicine, due to their wide range of applications. During recent years, one of the most challenging goals is the development of new strategies to finely tune the unique properties of MNPs, in order to improve their effectiveness in the biomedical field. This review provides an up-to-date overview of the methods of synthesis and functionalization of MNPs focusing on Iron Oxide Nanoparticles (IONPs). Firstly, synthesis strategies for fabricating IONPs of different composition, sizes, shapes, and structures are outlined. We describe the close link between physicochemical properties and magnetic characterization, essential to developing innovative and powerful magnetic-driven nanocarriers. In conclusion, we provide a complete background of IONPs functionalization, safety, and applications for the treatment of Central Nervous System disorders.