Assessing the effect on the generation of environmentally persistent free radicals in hydrothermal carbonization of sewage sludge

Environmentally persistent free radicals and other paramagnetic species in wildland-urban interface fire ashes

Wildland-urban interface (WUI) fires consume fuels, such as vegetation and structural materials, leaving behind ash composed primarily of pyrogenic carbon and metal oxides. However, there is currently limited understanding of the role of WUI fire ash from different sources as a source of paramagnetic species such as environmentally persistent free radicals (EPFRs) and transition metals in the environment. Electron paramagnetic resonance (EPR) was used to detect and quantify paramagnetic species, including organic persistent free radicals and transition metal spins, in fifty-three fire ash and soil samples collected following the North Complex Fire and the Sonoma-Lake-Napa Unit (LNU) Lightning Complex Fire, California, 2020. High concentrations of organic EPFRs (e.g., 1.4 × 1014 to 1.9 × 1017 spins g-1) were detected in the studied WUI fire ash along with other paramagnetic species such as iron and manganese oxides, as well as Fe3+ and Mn2+ ions. The mean concentrations of EPFRs in various ash types decreased following the order: vegetation ash (1.1 × 1017 ± 1.1 × 1017 spins g-1) > structural ash (1.6 × 1016 ± 3.7 × 1016 spins g-1) > vehicle ash (6.4 × 1015 ± 8.6 × 1015 spins g-1) > soil (3.2 × 1015 ± 3.7 × 1015 spins g-1). The mean concentrations of EPFRs decreased with increased combustion completeness indicated by ash color; black (1.1 × 1017 ± 1.1 × 1017 spins g-1) > white (2.5 × 1016 ± 4.4 × 1016 spins g-1) > gray (1.8 × 1016 ± 2.4 × 1016 spins g-1). In contrast, the relative amounts of reduced Mn2+ ions increased with increased combustion completeness. Thus, WUI fire ash is an important global source of EPFRs and reduced metal species (e.g., Mn2+). Further research is needed to underpin the formation, transformation, and environmental and human health impacts of these paramagnetic species in light of the projected increased frequency, size, and severity of WUI fires.

Formation mechanism of persistent free radicals during pyrolysis of Fenton-conditioned sewage sludge: Influence of NOM and iron

The present study provided an innovative insight into the formation mechanism of persistent free radicals (PFRs) during the pyrolysis of Fenton-conditioned sludge. Fenton conditioners simultaneously improve the dewatering performance of sewage sludge and catalyze the pyrolysis of sewage sludge for the formation of PFRs. In this process, PFRs with a total number of spins of 9.533×1019 spins/g DS could be generated by pyrolysis of Fenton-conditioned sludge at 400°C. The direct thermal decomposition of natural organic matter (NOM) fractions contributed to the formation of carbon-centered radicals, while the Maillard reaction produced phenols precursors. Additionally, the reaction between aromatic proteins and iron played a crucial role in the formation of phenoxyl or semiquinone-type radicals. Kinetics analysis using discrete distributed activation energy model (DAEM) demonstrated that the average activation energy for pyrolysis was reduced from 178.28 kJ/mol for raw sludge to 164.53 KJ/mol for Fenton conditioned sludge. The reaction factor (fi) indicated that the primary reaction in Fenton-conditioned sludge comprised of 27 parallel first-order reactions, resulting from pyrolysis cleavage of the NOM fractions, the Maillard reaction, and iron catalysis. These findings are significant for understanding the formation process of PFRs from NOM in Fenton-conditioned sludge and provide valuable insight for controlling PFRs formation in practical applications.

Effect of chemical aging on phosphate adsorption and ecotoxicological properties of magnesium-modified biochar

Using magnesium-biochar composites (Mg-BC) in adsorption allows for the efficient and economically relevant removal of phosphate (PO43-) from water and wastewater. Applying Mg-BC for pollutant removal requires evaluating the adsorption capacity of composites and their ecotoxicological properties. Investigating the composite aging during the application of these composites into the soil is also essential. In the present study, nonaged and aged (at 60 or 90 °C) Mg-BC composites were investigated in the context of pyrolysis temperature (500 or 700 °C). All analyzed biochars were examined by Fourier transform infrared spectroscopy, X-ray powder diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy and surface area. The content of polycyclic aromatic hydrocarbons (PAHs) (bioavailable Cfree and organic solvent-extractable Ctot), heavy metals (HMs), and environmentally persistent free radicals (EPFRs) were determined. Ecotoxicity was evaluated using tests with Folsomia candida and Allivibrio fischeri. The dependence of adsorption on pyrolysis temperature and composite aging time was observed. Changes in physicochemical properties occurring as a result of aging reduced the adsorption of PO43- on Mg-BC composites. It was found that nonaged Mg-BC700 was more effective (9.55 mg g -1) in the adsorption of PO43- than Mg-BC500 (5.75 mg g-1). The adsorption capacities of aged composites were from 21 to 61% lower than those of the nonaged composites. Due to aging, the content of Cfree PAHs increased by 3-5 times depending on the pyrolysis temperature. However, aging reduced the Ctot PAHs in all composites from 24 to 35% depending on the pyrolysis temperature. Ecotoxicological evaluation of Mg-BC composites showed increased toxicity after aging to both organisms. The use of aged BC potentially increases the contaminant content and toxicity of Mg-BC composites.

Effect of zinc-biochar composite aging on its physicochemical and ecotoxicological properties

The stability of Zn-biochar composites is determined by environmental factors, including the aging processes. This paper focused on the ecotoxicological evaluation of Zn-biochar (Zn-BC) composites subjected to chemical aging. Pristine biochars and composites produced at 500 or 700 °C were incubated at 60 and 90 °C for six months. All biochars were characterized in terms of their physicochemical (elemental composition, Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and porous structure), ecotoxicological properties (tested with Folsomia candida and Aliivibrio fischeri) and contaminant content (polycyclic aromatic hydrocarbons (PAH), heavy metals (HM) and environmentally persistent free radicals (EPFR)). An increase in the number of surface oxygen functional groups and increased hydrophilicity and polarity of all Zn-BC composites were observed due to oxidation during aging. It was also found that Zn-BC aging at 90 °C resulted in a 28-30% decrease in solvent-extractable PAHs (Ʃ16 Ctot PAHs) compared to nonaged composites. The aging process at both temperatures also caused a 104 fold reduction in EPFRs in Zn-BC composites produced at 500 °C. The changes in the physicochemical properties of Zn-BC composites after chemical aging at 90 °C (such as pH and HM content) caused an increase in the toxicity of the composites to Folsomia candida (reproduction inhibition from 19 to 24%) and Aliivibrio fischeri (luminescence inhibition from 96 to 99%). The aging of composites for a long time may increase the adverse environmental impact of BC-Zn composites due to changes in physicochemical properties (itself and its interactions with pollutants) and the release of Zn from the composite.

Ecotoxicological characterization of engineered biochars produced from different feedstock and temperatures

Biochar (BC) engineering, which has recently gained a lot of interest, allows designing the functional materials. BC modification improves the properties of pristine biochar, especially in terms of adsorption parameters. An interesting type of modification is the introduction of metals into the BC's structure. There is a knowledge gap regarding the effects of modified BC (e.g., BC-Mg, BC-Zn) on organisms. The aim of this study was the ecotoxicological evaluation of BC-Mg and BC-Zn composites, received under diverse conditions from willow or sewage sludge at 500 or 700 °C. The ecotoxicological tests with bacteria Vibrio fischeri (V. fischeri) and invertebrates Folsomia candida (F. candida) were applied to determine the toxicity of BC. The content of toxic substances (e.g., polycyclic aromatic hydrocarbons (PAHs), heavy metals (HMs), environmentally persistent free radicals (EPFRs)) in BC were also determined and compared with ecotoxicological parameters. The ecotoxicity of studied BCs depends on many variables: feedstock type, pyrolysis temperature and the modification type. The Zn and Mg modification reduced (from 28 to 63 %) the total Ʃ16 PAHs content in willow-derived BCs while in SL-derived BCs the total Ʃ16 PAHs content was even 1.5-3 times higher compared to pristine BCs. The Zn modified willow-derived BCs affected positively on F. candida reproduction but showed inhibition of luminescence V. fischeri. BC-Mg exhibited harmful effect to F. candida. The ecotoxicological assessment carried out sheds light on the potential toxicity of BC-Zn and BC-Mg composites, which are widely used in the removal of heavy metals, pharmaceuticals, dyes from waters and soils.

Pollution characteristics of environmental persistent free radicals (EPFRs) and their contribution to oxidation potential in road dust in a large city in northwest China

Environmental persistent free radicals (EPFRs) are new environmental health risk substances in the atmosphere, and their oxidative toxicity (OT) has not been strongly confirmed. In this study, the fugitive characteristics of EPFRs in road dust in a metropolitan city located in northwest China, and their potential oxidative toxicity were investigated. The results showed that the road dust contains Carbon-centered EPFRs with the mean mass concentration of (6.6 ± 5.0) × 10¹⁷ spins/g. EPFRs in road dust are degradable and have a half-life of 4.5 years. The water insoluble (WIS) components contribute 71% to the oxidative toxicity of road dust and show a rapid toxicity generation process, while the oxidative toxicity generation rate of water-soluble dust is more stable. Based on the positive matrix factorization (PMF) model, the contribution of EPFRs-dominated factors to Total-OT and WIS-OT is 17.3% and 33.3%, respectively. The PMF model results indicated that different types of EPFRs contributed differently to the oxidative toxicity of road dust and Carbon-centered EPFRs are more likely to participate in reactive oxygen species generation. Our results highlight that the EPFRs are an important contributor to the oxidative toxicity of atmospheric particulate matter, and their oxidative toxicity is dependent on the types of free radicals. It also provides an important insight into the influence of other potentially toxic substances on the oxidative toxicity of atmospheric PM.

Role of persistent free radicals and lewis acid sites in visible-light-driven wet peroxide activation by solid acid biochar catalysts - A mechanistic study

We report the synthesis of H₂SO₄-modified biochars (SBCs) as solid-acid catalysts to activate H₂O₂ at circumneutral pH under visible light radiation. Spent coffee grinds were pyrolyzed with TiO₂ at 300, 500 and 600 °C followed by steeping in 5 M H₂SO₄ and were used for the Fenton-like degradation of methyl orange (MO). The catalytic activity of SBC depended on the pyrolysis temperature and correlated well with the surface acidity and persistent free radical (PFR) concentration. Results showed that a complete MO removal and a TOC reduction of 70.2% can be achieved with SBC500 under photo-Fenton conditions. However, poisoning of the Lewis acid sites on SBC by PO₄^3- led to a dramatic decrease in the removal of MO with inhibition effects more pronounced than with radical scavengers, suggesting the key role played by acid-sites on the activation of H₂O₂. Finally, electron paramagnetic resonance (EPR) studies identified •OH as the key transient in the degradation followed by •O₂^- and ¹O₂. These findings suggest that H₂O₂ was likely adsorbed on the surface oxygenated functional groups before being decomposed by accepting electrons from the PFRs on the SBC surface.

Insight into biomass feedstock on formation of biochar-bound environmentally persistent free radicals under different pyrolysis temperatures

Environmentally persistent free radicals (EPFRs) in biochars have the ability of catalytic formation of reactive oxygen species, which may pose potential oxidative stresses to eco-environment and human health. Therefore, comprehending the formation and characteristics of EPFRs in biochars is important for their further applications. In this study, the woody lignocellulosic biomass (wood chips, pine needle and barks), non-woody lignocellulosic biomass (rice husk, corn stover, and duckweed), and non-lignocellulosic biomass (anaerobically digested sludge) were selected as biomass feedstock to prepare biochars under different pyrolysis temperatures (200–700 °C). The impact of biomass feedstock on formation of biochar-bound EPFRs was systematically compared. Elemental compositions and atomic ratios of H/C and O/C varied greatly among different biomass feedstocks and the subsequently resulting biochars. EPFRs in biochars derived from the studied lignocellulosic biomass have similar levels of spin concentrations (10¹⁸–10¹⁹ spins per g) except for lower EPFRs in biochars under 200 and 700 °C; however, sludge-based biochars, a typical non-lignocellulosic-biomass-based biochar, have much lower EPFRs (10¹⁶ spins per g) than lignocellulosic-biomass-based biochars under all the studied pyrolysis temperatures. Values of g factors ranged from 2.0025 to 2.0042 and line width was in the range of 2.15–11.3 for EPFRs in the resulting biochars. Spin concentrations of biochar-bound EPFRs increased with the increasing pyrolysis temperatures from 200 to 500 °C, and then decreased rapidly from 500 to 700 °C and oxygen-centered radicals shifted to carbon-centered radicals with the increasing pyrolysis temperatures from 200 to 700 °C for all the studied biomass feedstock. 300–500 °C was the appropriate pyrolysis temperature range for higher levels of spin concentrations of biochar-bound EPFRs. Moreover, EPFRs' concentrations had significantly positive correlation with C contents and weak or none correlation with contents of transition metals. Overall, different types of biomass feedstock have significant impact on the formation of EPFRs in the resulting biochars.

Environmentally persistent free radicals (EPFRs) in biochars have the ability of catalytic formation of reactive oxygen species, which may pose potential oxidative stresses to eco-environment and human health.

Characteristics of Environmentally Persistent Free Radicals in PM2.5 and the Influence of Air Pollutants in Shihezi, Northwestern China

Environmentally persistent free radicals (EPFRs) are a kind of hazardous substance that exist stably in the atmosphere for a long time. EPFRs combined with fine particulate matter (PM_2.5) can enter the human respiratory tract through respiration, causing oxidative stress and DNA damage, and they are also closely related to lung cancer. In this study, the inhalation risk for EPFRs in PM_2.5 and factors influencing this risk were assessed using the equivalent number of cigarette tar EPFRs. The daily inhalation exposure for EPFRs in PM_2.5 was estimated to be equivalent to 0.66–8.40 cigarette tar EPFRs per day. The concentration level and species characteristics were investigated using electron paramagnetic resonance spectroscopy. The concentration of EPFRs in the study ranged from 1.353–4.653 × 10¹³ spins/g, and the types of EPFRs were mainly oxygen- or carbon-centered semiquinone-type radicals. Our study showed that there is a strong correlation between the concentrations of EPFRs and conventional pollutants, except for sulfur dioxide. The major factors influencing EPFR concentration in the atmosphere were temperature and wind speed; the higher the temperature and wind speed, the lower the concentration of EPFRs. The findings of this study provide an important basis for further research on the formation mechanism and health effects of EPFRs.

The effect of persistent free radicals in sludge derived biochar on p-chlorophenol removal

Sewage sludge pyrolysis can effectively dispose of sludge and obtain sludge-derived biochar (SDBC) as an adsorbent for pollutant removal. Recently, persistent free radicals (PFRs), which have also been detected in many types of biochar, have attracted considerable attention for organic pollutant degradation. Sludge collected from a sewage treatment plant was pyrolyzed into SDBC, which contained a large amount of PFRs, and the resulting SDBC was then applied for the removal of p-chlorophenol. An SDBC dosage of 5 g L^-1 was applied for treating 5 mg L^-1 of p-chlorophenol; the highest removal efficiency of 90% was achieved at pH 3, and 22% of the initial p-chlorophenol was degraded by the SDBC. Hydroxyl free radicals were observed and contributed to the degradation of p-chlorophenol. The spent SDBC was reused five times after regeneration through the desorption of adsorbed p-chlorophenol. The p-chlorophenol removal efficiency remained constant, but the degradation decreased with increasing reuse cycles, suggesting that the p-chlorophenol degradation efficiency was positively correlated with the intensity of PFRs on SDBC. Further modification of the SDBC sample in HNO₃ or NaOH increased the amount of PFRs, and consequently, the degradation of p-chlorophenol under low oxygen conditions, further confirming the crucial role of PFRs in p-chlorophenol degradation. This study provides insights into the application of SDBC, a promising material, for contaminant abatement.

Molecular composition and biotoxicity effects of dissolved organic matters in sludge-based carbon: Effects of pyrolysis temperature

Sludge pyrolysis carbonization has shown potential to convert sludge biomass into multifunctional carbon materials. However, ecological risks of dissolved organic matters (DOMs) with obscure molecular characteristics retaining in sludge-based carbons (SBCs) have received little attention. This study investigated the impact of pyrolysis temperatures on the molecular conversion and biotoxicity effects of DOMs in SBCs. The results revealed that DOMs in SBCs_300-400 were mainly derived from depolymerization of biopolymers and the polycondensation and cyclization of small intermediate molecules, which mainly consisted of aromatic CHON compounds with 1-3 N atoms, featuring high unsaturation and molecular weights. High-temperature pyrolysis (500-800 °C) promoted the decomposition and ring-opening of aromatic CHON compounds into saturated aliphatic CHO compounds with 2-4 O atoms in SBCs_500-800. Noteworthily, SBCs_300-400-derived DOMs showed relatively strong biotoxicity on the growth and development of wild-type zebrafish embryos, pakchoi seeds, and Vibrio qinghaiensis Q67, which was significantly related to aromatic amines, phenols, and heterocyclic-N compounds in DOMs of SBCs_300-400. SBCs_500-800-derived DOMs were mainly straight-chain fatty acids and showed no observable acute biotoxicity. This study highlights the negative impact of DOMs in SBCs on the ecological environment, and provides the theoretical basis for controlling toxic byproducts in sludge pyrolysis process.

Temperature-dependent profiles of dioxin-like toxicants from combustion of brominated flame retardants

Literature provides detailed mechanisms underpinning the formation of a wide array of bromine (Br)-containing molecules with a prime focus on dioxin-like compounds. However, from a more applied point of view, the practical deployment of attained thermo-kinetic parameters remains inadequate in the absence of a robust kinetic model that connects bromine transformation at the molecular level with pertinent experimental observations. Herein and to fill in this gap, this study constructs a chemical kinetic model to account for the "homogenous gas phase" emission of Br-aromatic pollutants from the oxidative thermal decomposition of a monobromobenzene molecule (MBZ). The latter serves as a model compound for brominated flame retardants (BFRs) present in e-waste. The model consists of sub-mechanisms (that include reaction rate constants and thermochemical T-dependent functions) for HBr oxidation, combustion mechanism of C₁-C₆ species, bromine transformation, and synthesis of Br dioxin-like compounds. Reaction rate parameters were obtained for a large array of reactions that constitute the core of the model. For instance, the obtained activation energies for the initial pathways in the formation of brominated biphenyls reside in the range of ~15-45 kJ/mol. Considering oxidation of 5000 ppm MBZ in a plug flow reactor, the model reasonably predicts the temperature-dependent profiles (between 500 and 1200 °C at atmospheric pressure) of a few PBDD/Fs (i.e., polybrominated dibenzo-p-dioxins) isomers in reference to limited corresponding experimental measurements. Most Br dioxin-like compounds appear in the narrow temperature window of 600-1000 °C and achieve their highest abundance at molar yields in the range of 1.0-15 mmol/mol MBZ. A high load (100-120 mmol/mol MBZ) of brominated environmentally persistent free radicals (Br-EPFR) emerges and shifts from bromophenoxy radicals to bromocyclopentadienyl radicals around 700 °C. Oxidation of a 2-bromophenol molecule results in the formation of higher yields of Br-toxicants when compared with that of MBZ. The assembled model provides an informed hazards assessment into the potential emission inventories of Br-compounds in the gas phase at conditions encountered in real scenarios, such as open burning and primitive treatment of e-waste. Via an atomic-base understanding of the complex bromine chemistry and speciation, the model allows the underlying operational conditions that reduce the emission of Br-notorious pollutants to be surveyed and fine-tuned.

Low-temperature oxidation of monobromobenzene: Bromine transformation and yields of phenolic species

Brominated benzenes and phenols constitute direct precursors in the formation of bromine-bearing pollutants; most notably PBDD/Fs and other dioxin-type compounds. Elucidating accurate mechanisms and constructing robust kinetic models for the oxidative transformation of bromobenzenes and bromophenols into notorious Br-toxicants entail a comprehensive understanding of their initial oxidation steps. However, pertinent mechanistic studies, based on quantum chemical calculations, have only focused on secondary condensation reactions into PBDD/Fs and PBDEs. Literature provide kinetic parameters for these significant reactions, nonetheless, without attempting to compile the acquired Arrhenius coefficients into kinetic models. To fill in this gap, this study sets out to illustrate primary chemical phenomena underpinning the low-temperature combustion of a monobromobenzene molecule (MBZ) based on a detail chemical kinetic model. The main aim is to map out temperature-dependent profiles for major intermediates and products. The constructed kinetic model encompasses several sub-mechanisms (i.e, HBr and benzene oxidation, bromination of phenoxy radicals, and initial reaction of oxygen molecules with MBZ). In light of germane experimental observations, the formulated kinetic model herein offers an insight into bromine speciation, conversion profile of MBZ, and formation of higher brominated congeners of benzene and phenol. For instance, the model satisfactorily accounts for the yields of dibromophenols from oxidation of a 2-bromophenol (2-MBP) molecule, in reference to analogous experimental measurements. From an environmental perspective, the model reflects the accumulation of appreciable loads of 2-bromophenoxy radicals at intermediate temperatures (i.e., a bromine-containing environmental persistent free radical, EPFR) from combustion of MBZ and 2-MBP molecules. Acquired mechanistic/kinetic parameters shall be useful in comprehending the complex bromine transformation chemistry in real scenarios, most notably those prevailing in thermal recycling of brominated flame retardants (BFRs).

Regulation of biochar mediated catalytic degradation of quinolone antibiotics: Important role of environmentally persistent free radicals

Antibiotic pollution threatens aquatic ecosystems and water supplies, so analysis of ecofriendly remediation approaches like biochars with catalytic degradation abilities is a top priority. In this work, quinolone antibiotics were degraded by activating oxidants to generate transient radicals using the environmentally persistent free radicals (EPFRs) carried by biochar. The physical and chemical characterization confirmed that biochar is suitable for the removal of organic pollutants. By regulating biochar preparation parameters, it was found that EPFR generation peaked at 500 °C. As the temperature increased from 300 °C to 500 °C, the EPFRs changed from oxygen-centered radicals (g > 2.0040) to carbon-centered radicals (g < 2.0030). The catalytic degradation efficiencies of the EPFR activated oxidants from large to small were: peroxydisulfate (PDS), peroxymonosulfate (PMS), H₂O₂ and flowing O₂. The combined actions of SO₄^•- and •OH effectively degraded antibiotics. The results showed that biochar activating persulfate is a promising technique for the degradation of antibiotics.

The key role of persistent free radicals on the surface of hydrochar and pyrocarbon in the removal of heavy metal-organic combined pollutants

We show that persistent free radicals (PFRs) on the surface of biochar can produce hydroxyl radicals (•OH) by catalyzing H₂O₂ to facilitate the removal of the combined pollutant BPA-Cr(VI). Microstructure characterization showed that the structures of pyrocarbon and hydrochar were significantly different when prepared at different temperatures. As the preparation temperature and preparation time for biochar increased, the concentration of PFRs first increased and then decreased. When biochar, PFRs, and H₂O₂ were present in the same solution, the single pollutants BPA and Cr(VI) as well as the combined pollutant BPA-Cr(VI) could be removed effectively, with removal rates greater than 90%. However, when PFRs, BPA, H₂O₂, and Cr(VI) were present in the same solution, Cr(VI) competed with H₂O₂ for electrons and promoted the removal of BPA. The results of this study could be applied to sludge recycling and be used to develop approaches to catalytically degrade combined pollutants.

Crystallization of struvite in a hydrothermal solution with and without calcium and carbonate ions

Hydrothermal experiments with magnesium, ammonium, and phosphate (MAP) solution at a temperature of 120 ^OC for 24 h and pH (9 and 10), whilst effects of varying Mg²⁺/Ca²⁺/HCO^-₃ ratios on struvite crystallization were examined. The study was performed to investigate their effects on the quality and quantity of crystals using the XRPD Rietveld refinement and SEM method. Obviously, the struvite crystallization was inhibited through the forming of calcite, dolomite, hydroxyapatite, sylvite, and Mg-whitlockite under different pH conditions. In the absence of Ca²⁺ and HCO^-₃ ions, struvite and dittmarite were formed at pH solutions (9 and 10). Struvite proportion reduced with pH (9 and 10) under Mg²⁺/Ca²⁺/HCO^-₃ ratios (1:1:1 and 2:1:1), and depleted under the Mg²⁺/Ca²⁺/HCO^-₃ ratio of 1:2:2. An obvious change in morphologies of crystals into nanosized particles was observed. Results of the low proportion of struvite for experiments with Mg^2+/Ca²⁺/HCO^-₃ molar ratios may be a drawback for phosphate recovery.

Carbon dioxide as a carrier gas and mixed feedstock pyrolysis decreased toxicity of sewage sludge biochar

The common use of sewage sludge (SSL)-derived biochar can be limited due to contaminants present in SSL, which may affect SSL-derived biochar toxicity. We propose the reduction of SSL-derived biochar toxicity by it co-pyrolysis with biomass and in CO₂ atmosphere. Ecotoxicity of biochars produced at 500, 600, and 700 °C from SSL and SSL with the addition of willow (at a ratio of SSL:willow - 8:2 and 6:4, w/w) in an atmosphere of N₂ or CO₂ were investigated. The toxicity of aqueous extracts derived from the biochars (Lepidium sativum - Elongation test, Vibrio fischeri - Microtox) or solid-phase toxicity (Lepidium sativum - Phytotoxkit F, Folsomia candida - Collembolan test) was also studied. SSL-derived biochar produced at N₂ atmosphere usually was toxic for all tested organisms. Co-pyrolysis of mixed feedstock reduced the toxicity of the produced biochar. In the case of biochars produced from SSL and willow under N₂ atmosphere decrease in inhibition of F. candida reproduction (from 27 to 58%) or its stimulation (from 7 to 30%) in comparison to SSL alone derived biochar, was observed. Co-pyrolysis of SSL with willow significantly reduced the toxicity of extracts the SSL-derived biochar towards L. sativum. The aqueous extracts obtained from the biochars produced at temperatures of 500 and 600 °C with willow addition were also less toxic to V. fischeri than the biochars produced from SSL alone. The change of carrier gas from N₂ to CO₂, regardless of the feedstock used, in most cases reduced toxicity or positively affected the test organisms. This was probably caused by changes in the physicochemical properties and content of contaminants in the biochars produced in an atmosphere of CO₂, compared to N₂. An exception was root growth inhibition in the solid phase tests where no significant differences were found between biochars produced in N₂ and CO₂.

The clinical data from 19 critically ill patients with coronavirus disease 2019: a single-centered, retrospective, observational study

Background

The objectives of this study were to analyze the clinical features of coronavirus disease 2019 (COVID-19) and evaluate the diagnosis and treatment.

Methods

A retrospective analysis of the clinical manifestation and auxiliary examination of 19 patients with COVID-19 from the Liyuan Hospital intensive care unit (ICU) between January 16, 2020 and February 20, 2020 was undertaken.

Results

There were 11 male and 8 female cases among the patients. The median (range) age was 73 (38–91) years. Of these patients, 8 (42.1%) had died and the median duration from ICU admission to death was 2 (interquartile range (IQR): 1–10.75) days. Seven of these 8 patients had underlying diseases. The auxiliary examination showed fever (68.4%), dry cough (15.8%), dyspnea (10.5%), and diarrhea (5.3%). All 19 cases showed ground-glass changes on chest computed tomography. Serum hypersensitive C-reactive protein (hs-CRP) and serum amylase A (SAA) were clearly increased in all of the cases. Among the 19 cases, there were 16 (84.2%) cases in which the total number of lymphocytes decreased, 12 cases (63%) had reduced liver function, and 11 cases (58%) had deviant results for fibrinogen (FIB) and D-dimer, in particular, the D-dimer level was significantly higher in the non-survivors compared with the survivors.

Conclusion

There were more men than women among critically ill patients. All of the cases showed ground-glass changes on chest computed tomography and the vast majority of patients displayed fever and dry cough. The clinical laboratory indices change significantly, especially the D-dimer level among non-survivors.