High yield conversion of biowaste coffee grounds into hierarchical porous carbon for superior capacitive energy storage

Oxygen-enriched carbon quantum dots from coffee waste: Extremely active organic photocatalyst for sustainable solar-to-H2O2 conversion

Solar-driven artificial photosynthesis offers a promising avenue for hydrogen peroxide (H2O2) generation, an efficient and economical replacement for current methods. The efficiency and selectivity hurdles of the two-electron oxygen reduction reaction (ORR) in solar-to- H2O2 conversion are substantial barriers to large scale production. In this manuscript, a simple biomass-assisted synthesis was performed to produce oxygen-enriched carbon quantum dots (OE-CQDs) from spent coffee waste, acting as an efficient photocatalyst for solar-powered H2O2 production. OE-CQDs can stabilize and store light-generated electrons effectively, boosting charge separation and enhancing photocatalytic performance with longevity. The maximal photocatalytic H2O2 production was achieved viz the utilization of OE-CQDs with generation rate of 356.86 μmol g-1 h-1 by retaining 80% activity without any external sacrificial donors. The outstanding performance of synthesized OE-CQDs under light exposure at wavelength (λ) of 280 nm has been ensured by the quantum yield value of 9.4% upon H2O2 generation. The combinatorial benefits of OE-CQDs with their authentic crystalline structure and oxygen enrichment, is expected to be enhancing the ORR activity through accelerating charge transfer, and optimizing oxygen diffusion. Consequently, our eco-friendly method holds considerable promise for creating highly efficient, metal-free photocatalysts for artificial H2O2 production.

Efficient Decaffeination with Recyclable Magnetic Microporous Carbon from Renewable Sources: Kinetics and Isotherm Analysis

Rapid global urbanization and population growth have ignited an alarming surge in emerging contaminants in water bodies, posing health risks, even at trace concentrations. To address this challenge, novel water treatment and reuse technologies are required as current treatment systems are associated with high costs and energy requirements. These drawbacks provide additional incentives for the application of cost-effective and sustainable biomass-derived activated carbon, which possesses high surface area and low toxicity. Herein, we synthesized microporous activated carbon (MAC) and its magnetic derivative (m-MAC) from tannic acid to decaffeinate contaminated aqueous solutions. Detailed characterization using SEM, BET, and PXRD revealed a very high surface area (>1800 m2/g) and a highly porous, amorphous, heterogeneous sponge-like structure. Physicochemical and thermal analyses using XPS, TGA, and EDS confirmed thermal stability, unique surface moieties, and homogeneous elemental distribution. High absorption performance (>96 %) and adsorption capacity (287 and 394 mg/g) were recorded for m-MAC and MAC, respectively. Mechanistic studies showed that the sorption of caffeine is in tandem with multilayer and chemisorptive mechanisms, considering the models' correlation and error coefficients. π-π stacking and hydrogen bonding were among the interactions that could facilitate MAC-Caffeine and m-MAC-Caffeine bonding interactions. Regeneration and reusability experiments revealed adsorption efficiency ranging from 90.5-98.4 % for MAC and 88.6-93.7 % for m-MAC for five cycles. Our findings suggest that MAC and its magnetic derivative are effective for caffeine removal, and potentially other organic contaminants with the possibility of developing commercially viable and cost-effective water polishing tools.

Biomass-based activated carbons produced by chemical activation with H3PO4 as catalysts for the transformation of α-pinene to high-added chemicals

In the era of ecology and careful care for the environment, it becomes important to use renewable raw materials of plant origin, which are often more easily available and cheaper. One of the important and rapidly developing directions of research are works related to the use of waste plant biomass; an example of this trend is the production of activated carbons from food industry waste. One of the examples of the application of derived from biomass activated carbons can be using them as catalysts for the isomerization of terpene compounds. Carbons based on waste biomass are characterized by the minimal amount of waste formation during their manufacture, and their use in the isomerization reaction allows to obtain high conversion of organic raw material and high selectivities of transformation to the desired products, making these carbons environmentally friendly substitutes for the catalysts used usually in this process. In this work, obtained carbonaceous catalysts were tested in the process of isomerization of α-pinene to high value chemicals (mainly camphene and limonene). Under the most favorable conditions (activated carbon from sunflower husks content in reaction mixture 5 wt%, temperature 180 °C, and reaction time 100 min), α-pinene was completely converted (conversion 100 mol%) with high selectivity towards camphene (54 mol%). To prepare activated carbons, biomass precursors (orange peels, sunflower husks, spent coffee grounds) were activated with 85% H3PO4 through the chemical activation. The obtained materials were characterized by such methods as sorption N2 at - 196 °C, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), and X-ray fluorescence (XRF) to determine the relationship between their textural-chemical properties and catalysts activity in isomerization process. The synthesized materials were characterized by a specific surface area in the range of 930-1764 m2, total pore volume in the range of 0.551-1.02 cm3/g, and total acid-site concentrations in the range of 1.47-2.33 mmol/g. These results showed that textural parameters of the obtained activated carbons have the important role in the isomerization of α-pinene.

Waste paper-derived porous carbon via microwave-assisted activation for energy storage and water purification

The reuse of waste papers by conversion into valuable carbon materials has received considerable attention for diverse applications such as energy storage and water purification. However, traditional methods for converting waste papers into materials with suitable properties for specific applications are often complex and ineffective, involving consecutive carbonization and activation steps. Herein, we propose a simple one-step microwave (MW)-assisted synthesis for preparing waste paper-derived porous carbons (WPCs) for energy storage and water purification. Through a 30-min synthesis, WPCs with graphitic structure and high specific surface area were successfully produced. The fabricated WPCs exhibited outstanding charge storage capability with a maximum specific capacitance of 237.7 F g-1. Additionally, the WPC demonstrates a high removal efficiency for various dyes, achieving a maximum removal efficiency of 95.0% for methylene blue. The developed one-step MW synthesis not only enables the production of porous carbon from waste paper, but also offers a viable approach to address solid waste management challenges while simultaneously yielding valuable materials.

Waste Coffee Ground-Derived Porous Carbon for Neurochemical Detection

We present an optimized synthetic method for repurposing coffee waste to create controllable, uniform porous carbon frameworks for biosensor applications to enhance neurotransmitter detection with fast-scan cyclic voltammetry. Harnessing porous carbon structures from biowastes is a common practice for low-cost energy storage applications; however, repurposing biowastes for biosensing applications has not been explored. Waste coffee ground-derived porous carbon was synthesized by chemical activation to form multivoid, hierarchical porous carbon, and this synthesis was specifically optimized for porous uniformity and electrochemical detection. These materials, when modified on carbon-fiber microelectrodes, exhibited high surface roughness and pore distribution, which contributed to significant improvements in electrochemical reversibility and oxidative current for dopamine (3.5 ± 0.4-fold) and other neurochemicals. Capacitive current increases were small, showing evidence of small increases in electroactive surface area. Local trapping of dopamine within the pores led to improved electrochemical reversibility and frequency-independent behavior. Overall, we demonstrate an optimized biowaste-derived porous carbon synthesis for neurotransmitter detection for the first time and show material utility for viable neurotransmitter detection within a tissue matrix. This work supports the notion that controlled surface nanogeometries play a key role in electrochemical detection.

The Beneficial Impact of Mineral Content in Spent-Coffee-Ground-Derived Hard Carbon on Sodium-Ion Storage

The key technological implementation of sodium-ion batteries is converting biomass-derived hard carbons into effective anode materials. This becomes feasible if appropriate knowledge of the relations between the structure of carbonized biomass products, the mineral ash content in them, and Na storage properties is gained. In this study, we examine the simultaneous impact of the ash phase composition and carbon structure on the Na storage properties of hard carbons derived from spent coffee grounds (SCGs). The carbon structure is modified using the pre-carbonization of SCGs at 750 °C, followed by annealing at 1100 °C in an Ar atmosphere. Two variants of the pre-carbonization procedure are adopted: the pre-carbonization of SCGs in a fixed bed and CO2 flow. For the sake of comparison, the pre-carbonized products are chemically treated to remove the ash content. The Na storage performance of SCG-derived carbons is examined in model two and three Na-ion cells. It was found that ash-containing carbons outperformed the ash-free analogs with respect to cycling stability, Coulombic efficiency, and rate capability. The enhanced performance is explained in terms of the modification of the carbon surface by ash phases (mainly albite) and its interaction with the electrolyte, which is monitored by ex situ XPS.

A sustainable bio-based char as emerging electrode material for energy storage applications

In the last few years, extensive research efforts have been made to develop novel bio-char-based electrodes using different strategies starting from a variety of biomass precursors as well as applying different thermochemical conversion paths. In this regard, hydrothermal carbonization method is becoming a more prevalent option among conversion procedures even if pyrolysis remains crucial in converting biomass into carbonaceous materials. The main aim of this study is to develop an innovative supercapacitor electrode from spruce bark waste through a unique low-temperature technique approach, which proved to effectively eliminate the pyrolysis step. Consequently, a hybrid spruce-bark-graphene oxide compound (HySB) was obtained as electrode material for supercapacitors. When compared to a regularly used commercial electrode material, SLC1512P graphite (reference) with 150.3 µF cm-2 capacitance, the HySB has a substantially higher capacitive performance of 530.5 µF cm-2. In contrast to the reference, the HySB polarization resistance increases by two orders of magnitude at the stationary potential and by three orders of magnitude at the optimum potential, underlying that the superior performances of HySB extend beyond static conditions. The synthesis strategy provides an appropriate energy-efficient option for converting biomass into carbonaceous materials with meaningful properties suitable for energy storage applications.

Energy storage and key derives of octadecane thermal stability during phase change assembly with animal manure-derived biochar

The design of eco-friendly and renewable energy infrastructure is highly desirable to advance the global energy landscape. Phase-change materials (PCMs) are used to mitigate intermittency issues and reversibly store high densities of thermal energy in the form of heat during the phase transition process and provide ample potential for the advancement of renewable energy infrastructure. However, the leakage and low thermal stability of pristine PCMs along with the complicated synthesis strategies and environmental issues of the supporting materials cause significant drawbacks, thereby requiring a sustainable confining agent. In this study, a green phase change composite was developed using biowaste-derived biochar and octadecane via a vacuum impregnation strategy. The structural, morphological, thermal, and shape stabilities, as well as the chemical compatibilities of both the composite components and the octadecane-biochar composite, were investigated. The supporting biochar provides sufficient physical and thermal support besides high encapsulating capacity due to high specific surface area (135.2 m2 g-1) and predominant mesoporous proportion (86%). The results displayed that the composite material revealed a high leakage-proof capability (above the melting point of pure octadecane) with a low leakage rate (<12.5%) for a long heating time, excellent thermal stability, and high latent heat retention (89.5%) after 1000 heating-cooling cycles. The fabricated composite attained satisfactory phase change enthalpy storage, which was 130% and 168.9% higher than that of rice-husk-paraffin and garlic peel-derived carbon-paraffin, respectively, indicating promising thermal management performance. This study opens avenues for the development of green composite materials and renewable energy storage and conversion, which will play a significant role in various sectors such as building energy-saving and heat recovery systems.

An Effective Strategy to Synthesize Well-Designed Activated Carbon Derived from Coal-Based Carbon Dots via Oxidation before Activation with a Low KOH Content as Supercapacitor Electrodes

The development of coal-based activated carbon for supercapacitors provides a robust and effective approach toward the clean and efficient use of coal, and it also offers high-quality and low-cost raw materials for energy storage devices. However, the one-step activation method for preparing coal-based activated carbon has problems, such as difficulty in introducing surface-functional groups and high KOH dosage. In our work, activated carbon was prepared through an effective strategy of oxidation and KOH activation with a low KOH content by employing coal-based carbon dots as raw material. The influence of temperature during the KOH activation of carbon dots on a specific surface area, pore structure, and various quantities and types of surface-functional groups, as well as on the electrochemical performance of supercapacitors, was systematically studied. The as-prepared sample, with the alkali-carbon ratio of 0.75, processes a large specific surface area (1207 m2 g-1) and abundant surface-functional groups, which may provide enormous active sites and high wettability, thus bringing in high specific capacitance and boosted electrochemical performances. The oxygen and nitrogen content of the activated carbon decreases while the carbon content increases, and the activation temperature also increases. The as-prepared activated carbon reaches the highest specific capacitance of 202.2 F g-1 in a 6 M KOH electrolyte at a current density of 10 A g-1. This study provides new insight into the design of high-performance activated carbon and new avenues for the application of coal-based carbon dots.

Porous Structure and Fractal Dimensions of Activated Carbon Prepared from Waste Coffee Grounds

The present work reports the results of a systematic study on the evolution of the morphological properties of porous carbons derived from coffee waste using a one-pot potassium-hydroxide-assisted process at temperatures in the range of 400-900 °C. Raw materials and obtained carbons were studied by TG, DTG, SEM and nitrogen adsorption porosimetry. The decomposition temperature ranges for hemicellulose, cellulose and lignin as the main component of the feedstock have been established. It is shown that the proposed method for the thermochemical treatment of coffee waste makes it possible to obtain activated carbon with a controllable pore size distribution and a high specific surface area (up to 1050 m2/g). A comparative study of the evolution of the distribution of pore size, pore area and pore volume has been carried out based on the BJH and NL-DFT (slit-like pores approximation) methods. The fractal dimension of the obtained carbons has been calculated by Frenkel-Halsey-Hill method for single-layer and multilayer adsorptions.

"Liquid-To-Solid" Conversion of Biomass Wastes Enhanced by Uniform Nitrogen Doping for the Preparation of High-Value-Added Carbon Materials for Energy Storage with Superior Characteristics

Sustainable human development urgently calls for decreasing the cost of energy storage. Continuous massive consumption of dedicated carbon electrode materials with complex internal molecular architectures requires rethinking both the source of materials and the process of their production. Finding an efficient sustainable solution is focused on the reuse and development of waste processing into corresponding high-value-added carbon materials. The processing of solid wastes into solid value-added carbon materials ("solid-to-solid") is relatively well developed but can be a two-stage process involving carbon architecture rearrangement and heteroatom doping. Processing liquid wastes into high-value-added solid material ("liquid-to-solid") is typically much more challenging with the need for different production equipment. In the present study, a new approach is developed to bypass the difficulty in the "liquid-to-solid" conversion and simultaneously built in the ability for heteroatom doping within one production stage. Polycondensation of liquid humins waste with melamine (as a nitrogen-containing cross-linking component) results in solidification with preferential C and N atomic arrangements. For subsequent thermochemical conversion of the obtained solidified wastes, complicated equipment is no longer required, and under simple process conditions, carbon materials for energy storage with superior characteristics were obtained. A complete sequence is reported in the present study, including liquid waste processing, nitrogen incorporation, carbon material production, structural study of the obtained materials, detailed electrochemical evaluation and real supercapacitor device manufacture and testing.

Agricultural waste to real worth biochar as a sustainable material for supercapacitor

Biochar made from agricultural waste is gaining more attention in energy field due to its sustainability, low cost, apart from having high supercapacitance performance. Also, it has a wide range of environmental applications, including wastewater treatment, upgrading soil fertility, contaminant immobilization, and in situ carbon sequestration. The existing thermo-chemical methodologies for converting agricultural waste into a sustainable material i.e. biochar and the role of activation agents in enhancing the performance of these materials were critically analyzed and discussed. An overview of recent trends in agricultural waste-derived biochar for supercapacitor electrodes is highlighted in this review that emphasizes green circular economy for encouraging net-zero utility of agriculture waste biomass. The roles of various newly prepared "green" electrolytes in reducing the negative consequences of supercapacitor is also reviewed. The trashing of agricultural waste and the depletion of energy supplies has become a global concern, hurting the world's ecosystem and economy through pollution and a fuel crisis and hence the concept of a green circular economic model is also highlighted.

Reusing Waste Coffee Grounds as Electrode Materials: Recent Advances and Future Opportunities

Coffee industry produces more than eight million tons of waste coffee grounds (WCG) annually. These WCG contain caffeine, tannins, and polyphenols and can be of great environmental concern if not properly disposed of. On the other hand, components of WCG are mainly macromolecular cellulose and lignocellulose, which can be utilized as cheap carbon precursors. Accordingly, various forms of carbon materials have been reportedly synthesized from WCG, including activated carbon, mesoporous carbon, carbon nanosheets, carbon nanotubes, graphene sheet fibers (i.e., graphenated carbon nanotubes), and particle-like graphene. Upcycling of various biomass and/or waste into value-added functional materials is of growing significance to offer more sustainable solutions and enable circular economy. In this context, this review offers timely insight on the recent advances of WCG derived carbon as value-added electrode materials. As electrodes, they have shown to possess excellent electrochemical properties and found applications in capacitor/supercapacitor, batteries, electrochemical sensors, owing to their low cost, high electrical conductivity, polarization, and chemical stability. Collectively, these efforts could represent an environmentally friendly and circular economy approach, which could not only help solve the food waste issue, but also generate high performance carbon-based materials for many electrochemical applications.

Biomass-Derived Carbon Materials in Heterogeneous Catalysis: A Step towards Sustainable Future

Biomass-derived carbons are emerging materials with a wide range of catalytic properties, such as large surface area and porosity, which make them ideal candidates to be used as heterogeneous catalysts and catalytic supports. Their unique physical and chemical properties, such as their tunable surface, chemical inertness, and hydrophobicity, along with being environmentally friendly and cost effective, give them an edge over other catalysts. The biomass-derived carbon materials are compatible with a wide range of reactions including organic transformations, electrocatalytic reactions, and photocatalytic reactions. This review discusses the uses of materials produced from biomass in the realm of heterogeneous catalysis, highlighting the different types of carbon materials derived from biomass that are potential catalysts, and the importance and unique properties of heterogeneous catalysts with different preparation methods are summarized. Furthermore, this review article presents the relevant work carried out in recent years where unique biomass-derived materials are used as heterogeneous catalysts and their contribution to the field of catalysis. The challenges and potential prospects of heterogeneous catalysis are also discussed.

Biomass-Derived Porous Carbon with a Good Balance between High Specific Surface Area and Mesopore Volume for Supercapacitors

Porous carbon has been one desirable electrode material for supercapacitors, but it is still a challenge to balance the appropriate mesopore volume and a high specific surface area (SSA). Herein, a good balance between a high SSA and mesopore volume in biomass-derived porous carbon is realized by precarbonization of wheat husk under air atmosphere via a chloride salt sealing technique and successive KOH activation. Due to the role of molten salt generating mesopores in the precarbonized product, which can further serve as the active sites for the KOH activation to form micropores in the final carbon material, the mesopore-micropore structure of the porous carbon can be tuned by changing the precarbonization temperature. The appropriate amount of mesopores can provide more expressways for ion transfer to accelerate the transport kinetics of diffusion-controlled processes in the micropores. A high SSA can supply abundant sites for charge storage. Therefore, the porous carbon with a good balance between the SSA and mesopores exhibits a specific gravimetric capacitance of 402 F g^-1 at 1.0 A g^-1 in a three-electrode system. In a two-electrode symmetrical supercapacitor, the biomass-derived porous carbon also delivers a high specific gravimetric capacitance of 346 F g^-1 at 1.0 A g^-1 and a good cycling stability, retaining 98.59% of the initial capacitance after 30,000 cycles at 5.0 A^-1. This work has fundamental merits for enhancing the electrochemical performance of the biomass-derived porous carbon by optimizing the SSA and pore structures.

Use of biochar co-mediated chitosan mesopores to encapsulate alkane and improve thermal properties

Phase-change materials (PCMs) plays a significant role in energy conservation and thermal management systems. However, excessive seepage and insufficient thermal conductivity of pristine PCMs are restricting its real-world applications. Herein, "anisotropic-like" biochar with favorable pore characteristics is designed by combining it with chitosan for dodecane encapsulation. The use of biochar could overcome high manufacturing costs and associated environmental issues of PCM supporting materials. Biochar co-mediated chitosan enrich the mesopore proportion (96.5%) and provide interactive synergistic architecture. The prepared composite PCM exhibited outstanding latent heat retention of 95.9% after repeated cycling, high loading ratio, enhanced thermal conductivity (0.373 W/(m·K)), leakage-free, and repeatable utilization properties above the melting point of pristine dodecane. A figure of merit of 33.94 × 10⁶ W² S/(m^4oC) was achieved, far surpassing that measure among reported biochar-based composite PCMs. This study provides insights into next-generation sustainable energy storage development for a key global sustainability goal.

Intumescent flame retardants inspired template-assistant synthesis of N/P dual-doped three-dimensional porous carbons for high-performance supercapacitors

Heteroatom-doped three-dimensional (3D) porous carbons possess great potential as promising electrodes for high-performance supercapacitors. Inspired by the inherent features of intumescent flame retardants (IFRs) with universal availability, rich heteroatoms and easy thermal-carbonization to form porous carbons, herein we proposed a self-assembling and template self-activation strategy to produce N/P dual-doped 3D porous carbons by nano-CaCO₃ template-assistant carbonization of IFRs. The IFRs-derived carbon exhibited large specific surface area, well-balanced hierarchical porosity, high N/P contents and interconnected 3D skeleton. Benefitting from these predominant characteristics on structure and composition, the assembled supercapacitive electrodes exhibited outstanding electrochemical performances. In three-electrode 6 M KOH system, it delivered high specific capacitances of 407 F g^-1 at 0.5 A g^-1, and good rate capability of 61.2% capacitance retention at 20 A g^-1. In two-electrode organic EMIMBF₄/PC system, its displayed high energy density of 62.8 Wh kg^-1 at a power density of 748.4 W kg^-1, meanwhile it had excellent cycling stability with 84.7% capacitance retention after 10,000 cycles. To our best knowledge, it is the first example to synthesize porous carbon from IFRs precursor. Thus, the current work paved a novel and low-cost way for the production of high-valued carbon material, and expanded its application for high-performance energy storage devices.

Activated Carbons Obtained from Orange Peels, Coffee Grounds, and Sunflower Husks-Comparison of Physicochemical Properties and Activity in the Alpha-Pinene Isomerization Process

This work presents studies on the preparation of porous carbon materials from waste biomass in the form of orange peels, coffee grounds, and sunflower seed husks. The preparation of activated carbons from these three waste materials involved activation with KOH followed by carbonization at 800 °C in an N2 atmosphere. This way of obtaining the activated carbons is very simple and requires the application of only two reactants. Thus, this method is cheap, and it does not generate much chemical waste. The obtained activated carbons were characterized by XRD, SEM, XPS, and XRF methods. Moreover, the textural properties, acidity, and catalytic activity of these materials were descried. During catalytic tests carried out in the alpha-pinene isomerization process (the use of the activated carbons thus obtained in the process of alpha-pinene isomerization has not been described so far), the most active were activated carbons obtained from coffee grounds and orange peels. Generally, the catalytic activity of the obtained materials depended on the pore size, and the most active activated carbons had more pores with sizes of 0.7-1.0 and 1.1-1.4 nm. Moreover, the presence of potassium and chlorine ions in the pores may also be of key importance for the alpha-pinene isomerization process. On the other hand, the acidity of the surface of the tested active carbons did not affect their catalytic activity. The most favorable conditions for carrying out the alpha-pinene isomerization process were the same for the three tested activated carbons: temperature 160 °C, amount of the catalyst 5 wt.%, and reaction time 3 h. Kinetic studies were also carried out for the three tested catalysts. These studies showed that the isomerization over activated carbons from orange peels, coffee grounds, and sunflower seed husks is a first-order reaction.

Upgrading of pine tannin biochars as electrochemical capacitor electrodes

Biochar derived from the pyrolysis of pine tannin is a green and available by-product of oil manufacturing that presents interesting features after having been activated by KOH at 650 °C. Different weight ratios of KOH to biochar were used and the resulting activated carbons (ACs) presented highly developed specific surface areas of up to 2190 m² g^-1, well-connected porosity and high oxygen content, leading to enhanced electrochemical performance when used as electrochemical capacitor electrodes in a 1 M H₂SO₄ aqueous electrolyte. Galvanostatic charge/discharge experiments evidenced that the best material achieved a maximum electrode capacitance of up to 232 F g^-1 (at 0.5 A g^-1) with a capacitance retention of 70% at 10 A g^-1 using commercial mass loadings (i.e., approx. 10 mg cm^-2). In addition, long cycling stability with a residual capacitance of 92 to 94% after 10,000 cycles at 5 A g^-1 was achieved. These results prove that ACs derived from pine tannin biochars have great potential for their commercial use as electrochemical energy storage devices.

Comparison of acid exfoliators in carbon nanosheets synthesis from stinging nettle (Urtica dioica) for electrochemical applications

Carbon nanosheets (CNs) were successfully synthesized from nettle stem (NS) which is an inexpensive material with a high carbon content that is abundantly available in nature. CNs were produced using chemical (potassium hydroxide activation and acid exfoliation) and thermal treatments. Sulfuric (H2SO4), phosphoric (H3PO4) and nitric (HNO3) acid solutions were used for exfoliation. CNs exfoliated by H3PO4 have higher specific surface area (789 m2 g-1) compared to CNs exfoliated by H2SO4 (705 m2 g-1) and HNO3 (106 m2 g-1). In this work, NSCNs were found to be a potential candidate for electrode material in electrochemical capacitors. The maximum specific capacitance of the NSCNs exfoliated by H3PO4 is found to be 27.3 F g-1 at a current density of 0.05 A g-1, while the specific capacitance of NSCNs exfoliated by H2SO4 and HNO3 is 9.34 F g-1 and 1.71 F g-1, respectively. Energy density (0.06-0.95 Wh kg-1) and power density (20.9-26.7 W kg-1) of NSCNs are confirmed to be supercapacitor materials and can be applied in energy storage devices.

Facile Synthesis of Co3O4-Incorporated Multichannel Carbon Nanofibers for Electrochemical Applications

Considering their superior electrochemical performances, extensive studies have been carried out on composite nanomaterials based on porous carbon nanofibers. However, the introduction of inorganic components into a porous structure is complex and has a low yield. In this study, we propose a simple synthesis of cobalt-oxide-incorporated multichannel carbon nanofibers (P-Co-MCNFs) as electrode materials for electrochemical applications. The cobalt oxide component is directly formed in the carbon structure by a simple oxygen plasma exposure of the phase-separated polymer nanofibers. P-Co-MCNF displays high specific capacitance (815 F g^-1 at 2.0 A g^-1), rate capability (821 F g^-1 at 1 A g^-1 and 786 F g^-1 at 20 A g^-1), and cycle stability (92.1% for 5000 cycles) as a supercapacitor electrode. Moreover, excellent sensitivity (down to 1 nM) and selectivity to the glucose molecule is demonstrated for nonenzyme sensor applications.