Detachment of cell sheets from clinically ubiquitous cell culture vessels by ultrasonic vibration

Fibrinogen-based cell and spheroid sheets manipulating and delivery for mouse hindlimb ischemia

In this research, we introduced a novel strategy for fabricating cell sheets (CSs) prepared by simply adding a fibrinogen solution to growth medium without using any synthetic polymers or chemical agents. We confirmed that the fibrinogen-based CS could be modified for target tissue regardless of size, shape, and cell types. Also, fibrinogen-based CSs were versatile and could be used to form three-dimensional (3D) CSs such as multi-layered CSs and those mimicking native blood vessels. We also prepared fibrinogen-based spheroid sheets for the treatment of ischemic disease. The fibrinogen-based spheroid sheets had much higherin vitrotubule formation and released more angiogenic factors compared to other types of platform in this research. We transplanted fibrinogen-based spheroid sheets into a mouse hindlimb ischemia model and found that fibrinogen-based spheroid sheets showed significantly improved physiological function and blood perfusion rates compared to the other types of platform in this research.

Macromolecular crowding facilitates rapid fabrication of intact, robust cell sheets

OBJECTIVES

To develop a rapid and simple method to fabricate intact, robust cell sheets from common cell culture dishes by combination of a macromolecular crowding (MMC) reagent and vitamin C.

RESULTS

It was found that 3T3 fibroblasts or human bone marrow mesenchymal stem cells (hBMSCs) and their secreted cell derived extracellular matrices could be easily detached as intact cell sheets under gently pipetting after treated by MMC and vitamin C for 4 days. This method also allowed fabrication of functional multi-layered hepatic cell sheets by culturing 10 × 10⁴ cells/cm² HepG2 cells on top of confluent 3T3 fibroblast layers. What's more, MMC induced hBMSC cell sheets demonstrated 1.9 times larger area and 1.6 times greater cell number than that of cell sheets harvested from temperature-responsive cell culture dishes.

CONCLUSION

MMC based method make it possible to fabricate various types of cell sheets more conveniently, economically, and thus may facilitate wide application of cell sheet technology.

Cell Sheet Technology as an Engineering-Based Approach to Bone Regeneration

Bone defects that are congenital or the result of infection, malignancy, or trauma represent a challenge to the global healthcare system. To address this issue, multiple research groups have been developing novel cell sheet technology (CST)-based approaches to promote bone regeneration. These methods hold promise for use in regenerative medicine because they preserve cell-cell contacts, cell-extracellular matrix interactions, and the protein makeup of cell membranes. This review introduces the concept and preparation system of the cell sheet (CS), explores the application of CST in bone regeneration, highlights the current states of the bone regeneration via CST, and offers perspectives on the challenges and future research direction of translating current knowledge from the lab to the clinic.

Well-free agglomeration and on-demand three-dimensional cell cluster formation using guided surface acoustic waves through a couplant layer

Three-dimensional cell agglomerates are broadly useful in tissue engineering and drug testing. We report a well-free method to form large (1.4-mm) multicellular clusters using 100-MHz surface acoustic waves (SAW) without direct contact with the media or cells. A fluid couplant is used to transform the SAW into acoustic streaming in the cell-laden media held in a petri dish. The couplant transmits longitudinal sound waves, forming a Lamb wave in the petri dish that, in turn, produces longitudinal sound in the media. Due to recirculation, human embryonic kidney (HEK293) cells in the dish are carried to the center of the coupling location, forming a cluster in less than 10 min. A few minutes later, these clusters may then be translated and merged to form large agglomerations, and even repeatedly folded to produce a roughly spherical shape of over 1.4 mm in diameter for incubation—without damaging the existing intercellular bonds. Calcium ion signaling through these clusters and confocal images of multiprotein junctional complexes suggest a continuous tissue construct: intercellular communication. They may be formed at will, and the method is feasibly useful for formation of numerous agglomerates in a single petri dish.

Rapid detection of airborne protein from Mycobacterium tuberculosis using a biosensor detection system

The developed biosensor detection system can complete the detection of air samples by collecting exhaled breath condensate, greatly reducing the time to diagnose tuberculosis.

Propagating acoustic waves on a culture substrate regulate the directional collective cell migration

Collective cell migration plays a critical role in physiological and pathological processes such as development, wound healing, and metastasis. Numerous studies have demonstrated how various types of chemical, mechanical, and electrical cues dictate the collective migratory behaviors of cells. Although an acoustic cue can be advantageous because of its noninvasiveness and biocompatibility, cell migration in response to acoustic stimulation remains poorly understood. In this study, we developed a device that is able to apply surface acoustic waves to a cell culture substrate and investigated the effect of propagating acoustic waves on collective cell migration. The migration distance estimated at various wave intensities revealed that unidirectional cell migration was enhanced at a critical wave intensity and that it was suppressed as the intensity was further increased. The increased migration might be attributable to cell orientation alignment along the direction of the propagating wave, as characterized by nucleus shape. Thicker actin bundles indicative of a high traction force were observed in cells subjected to propagating acoustic waves at the critical intensity. Our device and technique can be useful for regulating cellular functions associated with cell migration.

Molecular and Metabolic Mechanism of Low-Intensity Pulsed Ultrasound Improving Muscle Atrophy in Hindlimb Unloading Rats

Low-intensity pulsed ultrasound (LIPUS) has been proved to promote the proliferation of myoblast C2C12. However, whether LIPUS can effectively prevent muscle atrophy has not been clarified, and if so, what is the possible mechanism. The aim of this study is to evaluate the effects of LIPUS on muscle atrophy in hindlimb unloading rats, and explore the mechanisms. The rats were randomly divided into four groups: normal control group (NC), hindlimb unloading group (UL), hindlimb unloading plus 30 mW/cm² LIPUS irradiation group (UL + 30 mW/cm²), hindlimb unloading plus 80 mW/cm² LIPUS irradiation group (UL + 80 mW/cm²). The tails of rats in hindlimb unloading group were suspended for 28 days. The rats in the LIPUS treated group were simultaneously irradiated with LIPUS on gastrocnemius muscle in both lower legs at the sound intensity of 30 mW/cm² or 80 mW/cm² for 20 min/d for 28 days. C2C12 cells were exposed to LIPUS at 30 or 80 mW/cm² for 5 days. The results showed that LIPUS significantly promoted the proliferation and differentiation of myoblast C2C12, and prevented the decrease of cross-sectional area of muscle fiber and gastrocnemius mass in hindlimb unloading rats. LIPUS also significantly down regulated the expression of MSTN and its receptors ActRIIB, and up-regulated the expression of Akt and mTOR in gastrocnemius muscle of hindlimb unloading rats. In addition, three metabolic pathways (phenylalanine, tyrosine and tryptophan biosynthesis; alanine, aspartate and glutamate metabolism; glycine, serine and threonine metabolism) were selected as important metabolic pathways for hindlimb unloading effect. However, LIPUS promoted the stability of alanine, aspartate and glutamate metabolism pathway. These results suggest that the key mechanism of LIPUS in preventing muscle atrophy induced by hindlimb unloading may be related to promoting protein synthesis through MSTN/Akt/mTOR signaling pathway and stabilizing alanine, aspartate and glutamate metabolism.

Development of accurate temperature regulation culture system with metallic culture vessel demonstrates different thermal cytotoxicity in cancer and normal cells

Hyperthermia has been studied as a noninvasive cancer treatment. Cancer cells show stronger thermal cytotoxicity than normal cells, which is exploited in hyperthermia. However, the absence of methods evaluating the thermal cytotoxicity in cells prevents the development of hyperthermia. To investigate the thermal cytotoxicity, culture temperature should be regulated. We, thus, developed a culture system regulating culture temperature immediately and accurately by employing metallic culture vessels. Michigan Cancer Foundation-7 cells and normal human dermal fibroblasts were used for models of cancer and normal cells. The findings showed cancer cells showed stronger thermal cytotoxicity than normal cells, which is quantitatively different from previous reports. This difference might be due to regulated culture temperature. The thermal stimulus condition (43 °C/30 min) was, further, focused for assays. The mRNA expression involving apoptosis changed dramatically in cancer cells, indicating the strong apoptotic trend. In contrast, the mRNA expression of heat shock protein (HSP) of normal cells upon the thermal stimulus was stronger than cancer cells. Furthermore, exclusively in normal cells, HSP localization to nucleus was confirmed. These movement of HSP confer thermotolerance to cells, which is consistent with the different thermal cytotoxicity between cancer and normal cells. In summary, our developed system can be used to develop hyperthermia treatment.

Mechanical properties of cell sheets and spheroids: the link between single cells and complex tissues

Cell aggregates, including sheets and spheroids, represent a simple yet powerful model system to study both biochemical and biophysical intercellular interactions. However, it is becoming evident that, although the mechanical properties and behavior of multicellular structures share some similarities with individual cells, yet distinct differences are observed in some principal aspects. The description of mechanical phenomena at the level of multicellular model systems is a necessary step for understanding tissue mechanics and its fundamental principles in health and disease. Both cell sheets and spheroids are used in tissue engineering, and the modulation of mechanical properties of cell constructs is a promising tool for regenerative medicine. Here, we review the data on mechanical characterization of cell sheets and spheroids, focusing both on advances in the measurement techniques and current understanding of the subject. The reviewed material suggest that interplay between the ECM, intercellular junctions, and cellular contractility determines the behavior and mechanical properties of the cell aggregates.

Photothermal release and recovery of mesenchymal stem cells from substrates functionalized with gold nanorods

Mesenchymal stem cell therapies show great promise in regenerative medicine. However, to generate clinically relevant numbers of these stem cells, significant in vitro expansion of the cells is required before transplantation into the affected wound or defect. The current gold standard protocol for recovering in vitro cultured cells involves treatment with enzymes such as trypsin which can affect the cell phenotype and ability to interact with the environment. Alternative enzyme free methods of adherent cell recovery have been investigated, but none match the convenience and performance of enzymatic detachment. In this work we have developed a synthetically simple, low cost cell culture substrate functionalized with gold nanorods that can support cell proliferation and detachment. When these nanorods are irradiated with biocompatible low intensity near infrared radiation (785 nm, 560 mWcm^-2) they generate localized surface plasmon resonance induced nanoscale heating effects which trigger detachment of adherent mesenchymal stem cells. Through simulations and thermometry experiments we show that this localized heating is concentrated at the cell-nanorod interface, and that the stem cells detached using this technique show either similar or improved multipotency, viability and ability to differentiate into clinically desirable osteo and adipocytes, compared to enzymatically harvested cells. This proof-of-principle work shows that photothermally mediated cell detachment is a promising method for recovering mesenchymal stem cells from in vitro culture substrates, and paves the way for further studies to scale up this process and facilitate its clinical translation. STATEMENT OF SIGNIFICANCE: New non-enzymatic methods of harvesting adherent cells without damaging or killing them are highly desirable in fields such as regenerative medicine. Here, we present a synthetically simple, non-toxic, infra-red induced method of harvesting mesenchymal stem cells from gold nanorod functionalized substrates. The detached cells retain their ability to differentiate into therapeutically valuable osteo and adipocytes. This work represents a significant improvement on similar cell harvesting studies due to: its simplicity; the use of clinically valuable stem cells as oppose to immortalized cell lines; and the extensive cellular characterization performed. Understanding, not just if cells live or die but how they proliferate and differentiate after photothermal detachment will be essential for the translation of this and similar techniques into commercial devices.

Travelling ultrasound promotes vasculogenesis of three-dimensional-monocultured human umbilical vein endothelial cells

To generate three‐dimensional tissue in vitro, promoting vasculogenesis in cell aggregates is an important factor. Here, we found that ultrasound promoted vasculogenesis of human umbilical vein endothelial cells (HUVECs). Promotion of HUVEC network formation and lumen formation were observed using our method. In addition to morphological evaluations, protein expression was quantified by western blot assays. As a result, expression of proteins related to vasculogenesis and the response to mechanical stress on cells was enhanced by exposure to ultrasound. Although several previous studies have shown that ultrasound may promote vasculogenesis, the effect of ultrasound was unclear because of unregulated ultrasound, the complex culture environment, or two‐dimensional‐cultured HUVECs that cannot form a lumen structure. In this study, regulated ultrasound was propagated on three‐dimensional‐monocultured HUVECs, which clarified the effect of ultrasound on vasculogenesis. We believe this finding may be an innovation in the tissue engineering field.

Acoustic streaming induced by MHz-frequency ultrasound extends the volume limit of cell suspension culture

Large-scale cell suspension culture technology opens up opportunities for numerous medical and bioengineering applications. For these purposes, scale-up of the culture system is paramount. For initial small-scale culture, a simple static suspension culture (SSC) is generally employed. However, cell sedimentation due to the lack of agitation limits the culture volume feasible for SSC. Thus, when scaling up, cell suspensions must be manually transferred from the culture flask to another vessel suitable for agitation, which increases the risk of contamination and human error. Ideally, the number of culture transfer steps should be kept to a minimum. The present study describes the fabrication of an ultrasonic suspension culture system that stirs cell suspensions with the use of acoustic streaming generated by ultrasound irradiation at a MHz frequency. This system was applied to 100-mL suspension cultures of Chinese hamster ovary cells-a volume ten-fold larger than that generally used. The cell proliferation rate in this system was 1.88/day when applying an input voltage of 40 V to the ultrasonic transducer, while that of the SSC was 1.14/day. Hence, the proposed method can extend the volume limit of static cell suspension cultures, thereby reducing the number of cell culture transfer steps.

Focused surface acoustic wave locally removes cells from culture surface

Regenerative medicine and drug development require large numbers of high-quality cells, usually delivered from in vitro culturing. During culturing, the appearance of unwanted cells and an inability to remove them without damaging or losing most if not all the surrounding cells in the culture reduce the overall quality of the cultured cells. This is a key problem in cell culturing, as is the inability to sample cells from a culture as desired to verify the quality of the culture. Here, we report a method to locally remove cells from an adherent cell culture using a 100.4 MHz focused surface acoustic wave (SAW) device. After exposing a plated C2C12 mouse myoblast cell culture to phosphate buffered solution (PBS), ultrasound from the SAW device transmitted into the cell culture via a coupling water droplet serves to detach a small grouping of cells. The cells are removed from an area 6 × 10^-3 mm², equivalent to about 12 cells, using a SAW device-Petri dish water gap of 1.5 mm, a PBS immersion time of 300 s, and an input voltage of 75 V to the SAW device. Cells were released as desired 90% of the time, releasing the cells from the target area nine times out of ten runs. In the one trial in ten that fails, the cells partially release and remain attached due to inter-cellular binding. By making it possible to target and remove small groups of cells as desired, the quality of cell culturing may be significantly improved. The small group of cells may be considered a colony of iPS cells. This targeted cell removal method may facilitate sustainable, contamination-free, and automated refinement of cultured cells.

Fundamental Technologies and Recent Advances of Cell-Sheet-Based Tissue Engineering

Tissue engineering has attracted significant attention since the 1980s, and the applications of tissue engineering have been expanding. To produce a cell-dense tissue, cell sheet technology has been studied as a promising strategy. Fundamental techniques involving tissue engineering are mainly introduced in this review. First, the technologies to fabricate a cell sheet were reviewed. Although temperature-responsive polymer-based technique was a trigger to establish and spread cell sheet technology, other methodologies for cell sheet fabrication have also been reported. Second, the methods to improve the function of the cell sheet were investigated. Adding electrical and mechanical stimulation on muscle-type cells, building 3D structures, and co-culturing with other cell species can be possible strategies for imitating the physiological situation under in vitro conditions, resulting in improved functions. Finally, culture methods to promote vasculogenesis in the layered cell sheets were introduced with in vivo, ex vivo, and in vitro bioreactors. We believe the present review that shows and compares the fundamental technologies and recent advances for cell-sheet-based tissue engineering should promote further development of tissue engineering. The development of cell sheet technology should promote many bioengineering applications.

Detachment of RAW264.7 macrophages from a culture dish using ultrasound excited by a Langevin transducer

To study the relationship between macrophages and antigens, an efficient culture method for macrophages is important. During culture, macrophages adhering to the culture surface are difficult to harvest by general trypsinization. Thus, prolonged trypsinization or cell scraping has been used to detach macrophages. However, prolonged trypsinization has a negative effect on cell viability, and the detachment efficiency with cell scrapers depends highly on the skill of a technician. Therefore, we developed a macrophage-detaching method by combining trypsin-EDTA and ultrasonic vibration to detach cells from a ubiquitous culture vessel. We fabricated a device that propagated ultrasound to a φ-35-mm culture dish from underneath. To demonstrate our concept, RAW264.7 cells were used as model cells and exposed to several detaching conditions to evaluate the effects of our developed method. In addition to the proposed method, as traditional detaching methods, simple trypsinization with trypsin-EDTA and manual cell scraping were performed. Furthermore, to determine the optimal intensity of the ultrasound, input voltages into the ultrasound transducer of 200, 225, and 250 V were used. As a result, the number of live cells detached by the developed method with an input amplitude of 225 V was approximately 4.8 times more than that by simple trypsinization and approximately 4.3 times more than that by scraping. Furthermore, the proliferation and phagocytosis level of the cells were increased by the developed method at 225 V, while no significant difference was found in metabolism. Thus, the developed method improves culture efficiency and cell functions without causing metabolic disorders.