Solvothermal synthesis of facet-dependent BiVO4 photocatalyst with enhanced visible-light-driven photocatalytic degradation of organic pollutant: assessment of toxicity by zebrafish embryo

Electrochemical oxidation of Florfenicol in aqueous solution with mixed metal oxide electrode: Operational factors, reaction by-products and toxicity evaluation

Veterinary antibiotics have become an emerging pollutant in water and wastewater sources due to excess usage, toxicity and resistance to traditional water and wastewater treatment. The present study explored the degradation of a model antibiotic- Florfenicol (FF) using electrochemical oxidation (EO) with Ti-RuO2/IrO2 anode. The anode material was characterized using SEM-EDS studies expressing stable structure and optimal interaction of the neighboring metal oxides with each other. The EDS results showed the presence of Ru, Ir, Ti, O and C elements with 6.44%, 2.57%, 9.61%, 52.74% and 28.64% atomic weight percentages, respectively. Optimization studies revealed pH 5, 30 mA cm-2 current density and 0.05 M Na2SO4 for 5 mg L-1 FF achieved 90% TOC removal within 360 min treatment time. The degradation followed pseudo-first order kinetics. LC-Q-TOF-MS studies revealed six predominant byproducts illustrating hydroxylation, deflourination, and dechlorination to be the major degradation mechanisms during the electrochemical oxidation of FF. Ion chromatography studies revealed an increase in Cl-, F- and NO3- ions as treatment time progressed with Cl- decreasing after the initial phase of the treatment. Toxicity studies using Zebrafish (Danio rerio) embryo showed the treated sample to be toxic inducing developmental disorders such as pericardial edema, yolk sac edema, spinal curvature and tail malformation at 96 h post fertilization (hpf). Compared to control, delayed hatching and coagulation were observed in treated embryos. Overall, this study sets the stage for understanding the effect of mixed metal oxide (MMO) anodes on the degradation of veterinary antibiotic-polluted water and wastewater sources using electrochemical oxidation.

Striking the balance: Unveiling the interplay between photocatalytic efficiency and toxicity of La-incorporated Ag3PO4

Persistent molecules, such as pesticides, herbicides, and pharmaceuticals, pose significant threats to both the environment and human health. Advancements in developing efficient photocatalysts for degrading these substances can play a fundamental role in remediating contaminated environments, thereby enhancing safety for all forms of life. This study investigates the enhancement of photocatalytic efficiency achieved by incorporating La3+ into Ag3PO4, using the co-precipitation method in an aqueous medium. These materials were utilized in the photocatalytic degradation of Rhodamine B (RhB) and Ciprofloxacin (CIP) under visible light irradiation, with monitoring conducted through high-performance liquid chromatography (HPLC). The synthesized materials exhibited improved stability and photodegradation levels for RhB. Particularly noteworthy was the 2% La3+-incorporated sample (APL2), which achieved a 32.6% mineralization of CIP, nearly three times higher than pure Ag3PO4. Toxicological analysis of the residue from CIP photodegradation using the microalga Raphidocelis subcapitata revealed high toxicity due to the leaching of Ag + ions from the catalyst. This underscores the necessity for cautious wastewater disposal after using the photocatalyst. The toxicity of the APL2 photocatalysts was thoroughly assessed through comprehensive toxicological tests involving embryo development in Danio rerio, revealing its potential to induce death and malformations in zebrafish embryos, even at low concentrations. This emphasizes the importance of meticulous management. Essentially, this study adeptly delineated a thorough toxicological profile intricately intertwined with the photocatalytic efficacy of newly developed catalysts and the resultant waste produced, prompting deliberations on the disposal of degraded materials post-exposure to photocatalysts.

Integrated photocatalysis adsorption processes for oxytetracycline removal: using volborthite and its composite with g-C3N4

The photocatalytic-adsorption performance of the composites of volborthite (CuVA) and graphitic carbon nitride (g-C3N4) was studied in this work using oxytetracycline (OTC) as model pollutant under LED light irradiation. CuVA at different weight percentages (10, 30, 50), namely, C10, C30, and C50, were loaded onto graphitic carbon nitride using wet chemical method. The physical, chemical, and optical properties were evaluated via various analytical techniques. Through integrated adsorption-photocatalytic process, no significant photocatalytic reaction occurred in g-C3N4 and the composite even after 4 h of irradiation. The setup was modified such that each run was conducted in the presence and absence of light. Aside from photolysis and g-C3N4, all composites performed better under the presence of light in which CuVA improved the most from ~ 50% down to ~ 20% of initial concentration. CuVA performed almost identically (80% removal of OTC) under the presence of light irradiation at ambient temperature (22 °C) and in the dark at 32 °C, confirming that temperature was the contributing factor to the improvement instead of light. CuVA exhibited excellent adsorption capacity of 171 mg/g and adsorption rate of 90% towards the removal of highly concentrated OTC (100 mg/L) under optimized parameters of pH 5.0 and at 42 °C after 3 h of adsorption process. Life cycle assessment revealed that close to 50% of fresh 100 ppm OTC could be removed after five cycles without any desorption process.

The visible-light-driven photocatalytic reduction of Cr6+ using BiVO4: assessing the effect of Au deposition and the reaction parameters

In this work, fern-leaf-like BiVO4 was used to photocatalytically reduce Cr6+ in water. Nanosized BiVO4 displayed bandgap energy and specific surface area of 2.49 eV and 5.65 m2 g-1, respectively. Metallic Au nanoparticles were deposited on the BiVO4 to increase the photocatalytic performance. To optimize the reaction conditions, the sacrificial agents methanol, ethanol, formic acid, dimethyl sulfoxide, and KI were tested, while different catalyst dosages and Au loadings were assessed. The best sacrificial agent was formic acid, which was used at an optimal concentration of 0.01 mol L-1. The complete removal of Cr6+ was attained after 90 min of visible light irradiation using a catalyst dosage of 1.5 g L-1. Depositing metallic Au nanoparticles barely improved the photocatalytic performance, thus unmodified BiVO4 was used to remove Cr6+ in tap water. The matrix effect slowed the photocatalytic process, and the complete removal of Cr6+ was achieved in 120 min. Cr3+ and Cr6+ species were precipitated on the catalyst surface at the end of the photocatalytic process; still, BiVO4 displayed high stability after three reaction cycles.

2D g-C3N4 nanosheets functionalized with nickel-doped ZrO2 nanoparticles for synergistic photodegradation of toxic chemical pollutants

The photocatalytic removal of toxic chemical pollutants from wastewater has garnered significant attention in recent times owing to its notable removal efficiency, cost-effectiveness, and eco-friendly characteristics. Nonetheless, this catalytic process necessitates augmented charge separation and distinctive interface properties to facilitate catalytic reactions for water treatment applications. Therefore, in the current study, novel g-C3N4/Ni-doped ZrO2 heterostructured hybrid catalysts have been synthesized via a hydrothermal approach. Microscopic studies reveal that ZrO2 nanospheres were distributed on the layered-like 2D structure of g-C3N4 nanosheets. Electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (UV-DRS), and photoluminescence (PL) characterizations were employed to investigate the impact of bandgap, electron-hole recombination, charge transfer, and interface properties on the catalytic performance of g-C3N4/ZrO2 hybrids. XRD analysis confirmed that the Ni-ions do not disturb the host lattice crystal structure and heterostructure development between g-C3N4 and doped ZrO2 sample. Structurally, Ni-doped nanoparticles were found to be equally superficially dispersed on g-C3N4 sheets. Optical analysis results suggest that the hybrid catalyst possesses a narrow bandgap of 2.56 eV. The synthesized photocatalyst degraded rhodamine B (RhB) and tetracycline (TC) with ∼92% and ∼89% degradation efficiency, respectively. Heterostructured hybrid catalysts showed superior degradation rate constants than other catalysts. This might be attributed to the sufficient separation of electron-hole due to the development of a heterojunction. The radical scavenging experiments suggested that O2●- and ●OH radicals contributed substantially to the dye elimination activity of the composite. Therefore, the synthesized novel nanohybrid catalysts in this study present an efficient and straightforward synthesis method for the efficient removal of toxins from wastewater under visible light irradiation.

Zircon-Type CaCrO4 Chromite Nanoparticles: Synthesis, Characterization, and Photocatalytic Application for Sunlight-Induced Degradation of Rhodamine B

The degradation of organic dye pollutants is a critical environmental issue that has garnered significant attention in recent years. To address this problem, we investigated the potential of CaCrO4 chromite (CCO) as a photocatalyst for the degradation of cationic and anionic dye solutions under sunlight irradiation. CaCrO4 was synthesized via a sol-gel auto-combustion route and sintered at 900 °C. The Rietveld refined XRD profile confirmed the zircon-type structure of CaCrO4 crystallized in the tetragonal unit cell with I41/amd space group symmetry. The surface morphology of the sample was investigated by field emission scanning electron microscopy (FESEM), which revealed the polyhedral texture of the grains. Energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) studies were carried out to analyze the elemental composition and chemical states of the ions present in the compound. Fourier transform infrared (FT-IR) spectroscopy analysis revealed the vibrational modes corresponding to the tetrahedral and dodecahedral metal oxide bonds. The optical band gap was approximated to be in the range of 1.928 eV by using the Tauc relation. The CaCrO4 catalyst with different contents (5, 20, 35, and 50 mg) was investigated for its photocatalytic performance for the degradation of RhB dye solution under sunlight irradiation using a UV-Vis spectrometer over the experimental wavelength range of 450-600 nm. The degradation efficacy increased from 70.630 to 93.550% for 5-35 mg and then decreased to 68.720% for 50 mg in 140 min under visible light illumination. The comparative study demonstrates that a higher degradation rate was achieved for cationic than anionic dyes in the order RhB > MB > MO. The highest deterioration (93.80%) was achieved for the RhB dye in 140 min. Equilibrium and kinetic studies showed that the adsorption process followed the Langmuir isotherm and pseudo-second-order models, respectively. The maximum adsorption capacity of 21.125 mg/g was observed for the catalyst concentration of 35 mg. From the cyclic test, it has been observed that the synthesized photocatalyst is structurally and morphologically stable and reusable. The radical trapping experiment demonstrated that superoxide and hydroxyl radicals were the primary species engaged in the photodegradation process. A possible mechanism for the degradation of RhB has been proposed. Hence, we conclude that CaCrO4 can be used as an efficient photocatalyst for the remediation of organic dye pollutants from the environment.

Revolutionizing the Role of Solar Light Responsive BiVO4/BiOBr Heterojunction Photocatalyst for the Photocatalytic Deterioration of Tetracycline and Photoelectrocatalytic Water Splitting

In this study, a series of BiVO4/BiOBr composites with varying mole ratios were successfully synthesized using a hydrothermal method. The in-situ synthesis strategy facilitated the formation of a close interfacial contact between BiVO4 and BiOBr at the depletion zone, resulting in improved charge segregation, migration, reduced charge recombination, enhanced solar light absorption capacity, promoting narrow band gap, and large surface area. This study investigates the influence of different mole ratios of BiVO4 and BiOBr in a BiVO4/BiOBr nanocomposite on the photocatalytic degradation of tetracycline (TC), a pharmaceutical pollutant, and photoelectrocatalytic water splitting (PEC) under solar light irradiation. Maximum decomposition efficiency of ~90.4% (with a rate constant of 0.0159 min-1) for TC was achieved with 0.5 g/L of 3:1 BiVO4: BiOBr (31BVBI) photocatalyst within 140 min. The degraded compounds resulting from the TC abatement were analyzed using GC-MS. Furthermore, TC standards exhibited 78.2% and 87.7% removal of chemical oxygen demand (COD) and total organic carbon (TOC), respectively, while TC tablets showed 64.6% COD removal and 73.8% TOC removal. The PEC water splitting experiments demonstrated that the 31BVBI photoanode achieved the highest photocurrent density of approximately 0.2198 mA/cm2 at 1.23 V vs. RHE, resulting in the generation of approximately 1.864 mmolcm-2 s-1 of hydrogen, while remaining stable for 21,600 s. The stability of the photocatalyst was confirmed by post-degradation characterizations, which revealed intact crystalline planes, shape, and surface area. Comparisons with existing physicochemical methods used in industries indicate that the reported photocatalyst possesses strong surface catalytic properties and has the potential for application in industrial wastewater treatment and hydrogen generation, offering an advantageous alternative to costly and time-consuming processes.

BiVO4 As a Sustainable and Emerging Photocatalyst: Synthesis Methodologies, Engineering Properties, and Its Volatile Organic Compounds Degradation Efficiency

Bismuth vanadate (BiVO₄) is one of the best bismuth-based semiconducting materials because of its narrow band gap energy, good visible light absorption, unique physical and chemical characteristics, and non-toxic nature. In addition, BiVO₄ with different morphologies has been synthesized and exhibited excellent visible light photocatalytic efficiency in the degradation of various organic pollutants, including volatile organic compounds (VOCs). Nevertheless, the commercial scale utilization of BiVO₄ is significantly limited because of the poor separation (faster recombination rate) and transport ability of photogenerated electron-hole pairs. So, engineering/modifications of BiVO₄ materials are performed to enhance their structural, electronic, and morphological properties. Thus, this review article aims to provide a critical overview of advanced oxidation processes (AOPs), various semiconducting nanomaterials, BiVO₄ synthesis methodologies, engineering of BiVO₄ properties through making binary and ternary nanocomposites, and coupling with metals/non-metals and metal nanoparticles and the development of Z-scheme type nanocomposites, etc., and their visible light photocatalytic efficiency in VOCs degradation. In addition, future challenges and the way forward for improving the commercial-scale application of BiVO₄-based semiconducting nanomaterials are also discussed. Thus, we hope that this review is a valuable resource for designing BiVO₄-based nanocomposites with superior visible-light-driven photocatalytic efficiency in VOCs degradation.

Novel g-C3N4/BiVO4 heterostructured nanohybrids for high efficiency photocatalytic degradation of toxic chemical pollutants

Novel heterostructured hybrid catalysts are essential for the efficient photocatalytic removal of organic pollutants from wastewater generated by the pharmaceutical and textile industries. In this study, novel g-C₃N₄/BiVO₄ nanohybrid catalysts were prepared using a solvothermal technique, and examined their structural and optical properties using different characterizations. The X-ray diffraction analysis confirmed the monoclinic crystal phase of BiVO₄. Field emission scanning electron microscopy (FESEM) images revealed that g-C₃N₄ sheets anchored on the surface of BiVO₄ nanospheres. X-ray photoelectron spectroscopy (XPS) analysis confirmed the oxidation states of g-C₃N₄/BiVO₄ composite sample. UV-Vis DRS spectroscopy analysis revealed that the composite (2.08 eV) sample had a reduced bandgap compared to other samples. The photocatalytic properties of the prepared samples were tested in the presence of organic methylene blue (MB) and antibiotic tetracycline (TC) pollutants under visible light illumination. The hybrid composite catalyst exhibited enhanced photocatalytic degradation efficiency of MB (88%) and TC (89%) pollutants at elevated rate constants of 0.0128 and 0.01174 min^-1, respectively. The improved catalytic performance of the composite catalyst is due to the heterojunctions between g-C₃N₄ and BiVO₄ that successfully reduced the rate of charge carrier recombination in the catalyst system. Scavenger experiments revealed that O₂^●- and h⁺ radicals played a main role in the degradation of the chemical pollutants. The developed g-C₃N₄/BiVO₄ heterostructured catalyst is a suitable candidate for removing contaminants from industrial wastewater because of its facile fabrication and exceptional photocatalytic activity under visible light irradiation.

New light on the photocatalytic performance of NH4V4O10 and its composite with rGO

Solar-driven photocatalysis has shown great potential as a sustainable wastewater treatment technology that utilizes clean solar energy for pollutant degradation. Consequently, much attention is being paid to the development of new, efficient and low-cost photocatalyst materials. In this study, we report the photocatalytic activity of NH₄V₄O₁₀ (NVO) and its composite with rGO (NVO/rGO). Samples were synthesized via a facile one-pot hydrothermal method and successfully characterized using XRD, FTIR, Raman, XPS, XAS, TG-MS, SEM, TEM, N₂ adsorption, PL and UV‒vis DRS. The results indicate that the obtained NVO and NVO/rGO photocatalysts exhibited efficient absorption in the visible wavelength region, a high content of V⁴⁺ surface species and a well-developed surface area. Such features resulted in excellent performance in methylene blue photodegradation under simulated solar light illumination. In addition, the composite of NH₄V₄O₁₀ with rGO accelerates the photooxidation of the dye and is beneficial for photocatalyst reusability. Moreover, it was shown that the NVO/rGO composite can be successfully used not only for the photooxidation of organic pollution but also for the photoreduction of inorganic pollutants such as Cr(VI). Finally, an active species trapping experiment was conducted, and the photodegradation mechanism was discussed.

Novel BiVO4-nanosheet-supported MoS2-nanoflake-heterostructure with synergistic enhanced photocatalytic removal of tetracycline under visible light irradiation

This paper describes a simple in-situ hydrothermal technique for the production of BiVO₄/MoS₂ binary nanocomposites as visible-light-driven catalysts. The as-prepared samples were analyzed by structural, morphological, compositional, optical, surface area, and photocurrent analyses. The lattice fringe spaces at 0.304 nm and 0.612 nm were indexed to the (112) and (002) crystal planes of BiVO₄ and MoS₂, respectively. Antibacterial photocatalytic capabilities were assessed using tetracycline (TC). Consequently, it was observed that the BiVO₄/MoS₂ nanocomposite demonstrated improved antibacterial removal ability compared with the pristine samples. The BiVO₄/MoS₂ nanocomposite exhibited 97.46% removal of TC compared with the pure BiVO₄ (43.76%) and MoS₂ (35.28%) samples within 90 min. Thus, the photocatalytic performance was observed to follow the given order: BiVO₄/MoS₂ nanocomposite > BiVO₄ > MoS₂. The removal of TC after 90 min of irradiation was approximately 97.46%, 96.62%, 95.59%, and 94.45% after the 1st, 2nd, 3rd, and 4th cycles, respectively. Thus, the recycling tests revealed the stability of the photocatalyst, which exhibited a TC removal efficiency of 94.45% without distinct decay, even after the 4th cycle. According to the trapping results, hydroxyl radicals and holes were the key species and demonstrated a greater influence on the photocatalytic performance than superoxide radicals. The increased activity of the BiVO₄/MoS₂ nanocomposite may be attributed to its large surface area and tunable bandgap, which accelerate the charge-transport characteristics of the photocatalytic system. This insight and synergetic effects can provide a new approach for the development of novel heterostructure photocatalysts.

Morphological guided sphere to dendrite BiVO4 for highly efficient organic pollutant removal and photoelectrochemical performance under solar light

Monoclinic BiVO₄ (m-BiVO₄) has been reported as promising phase for solar light driven photocatalysis. However, in the case of morphology guided BiVO₄ with different synthetic conditions maintaining the m-BiVO₄ phase remains a substantial challenge for achieving an efficient photocatalyst driven by solar light. Herein, a simple hydrothermal approach was used to produce well-defined template free m-BiVO₄ dendrites with distinct branches for photo catalytically removal of organic pollutant and photocurrent generation. The development of monoclinic dendrite BiVO₄ was confirmed after comprehensive structural, morphological, and optical examinations. FE-SEM images of m-BiVO₄ revealed transformation of spherical to dendritic morphology with distinct branches by simply changing the HNO₃ to NaOH ratios from 2:1 to 2:2, which are named as BVO 2-1 and BVO 2-2, respectively. The BVO 2-2 dendrites exhibited improved activity of 98% towards methylene blue (MB) photodegradation upon simulated solar light irradiation. The BVO 2-2 dendrites photoelectrode showed an outstanding photocurrent density of 1.4245 mAcm^-2 than that of the BVO 2-1 spherical photoelectrode (0.7367 mAcm^-2). Enhanced photocatalytic and photoelectrochemical action, could be ascribed to the unique morphological changes provides photoactive sites, harvest more light utilization together with higher separation of e^-/h⁺ pairs. Furthermore, photocatalytic mechanism is investigated based on scavenger trapping agent, valence band XPS, UV Visible DRS and PL study. Our findings could pave the way for the development of dendritic nanostructure photocatalysts with improved photocatalytic activity.

The impact of co-treatment with graphene oxide and metal mixture on Salmo trutta at early development stages: The sorption capacity and potential toxicity

Graphene oxide (GO) are novel nanomaterials with a wide range of applications due to their high absorption capacity. This study was undertaken with a view to assess the bioaccumulation and acute toxicity of GO used in combination with the heavy metal mixture (Cr, Cu, Ni and Zn) to fish embryos and larvae. For this purpose, Salmo trutta embryos and larvae were subjected to the 4-day long treatment with three different concentrations of GO, the metal mixture, which was prepared of four metals at the concentrations corresponding to the maximum-permissible-concentrations for EU inland waters (Cr-0.01, Cu-0.01, Ni-0.034, and Zn-0.1 mg/L), and with GO in combination with MIX (GO+MIX). When used in combination with the metal mixture, GO exhibited a high metal sorption capacity. The obtained confocal fluorescence microscopy results showed that GO located in the embryo chorion causing its damage; in larvae, however, GO were found only in the gill region. Results of these experiments confirmed the hypothesis that GO affects the accumulation of metals and mitigates their toxic effects on organism. In embryos, the acute toxicity of exposure to GO and co-exposure to MIX+GO was found to manifest itself through the decreased heart rate (HR) and malondialdehyde (MDA) level and through the increased metallothionein (MT) concentration. Meanwhile, in larvae, GO and MIX+GO were found to induce genotoxicity effects. However, changes in HR, MDA, MT, gill ventilation frequency, yolk sack absorption and cytotoxicity compared with those of the control group were not recorded in larvae. The obtained results confirmed our hypothesis: the combined effect of MIX and GO was less toxic to larvae (especially survival) than individual effects of MIX components. However, our results emphasize that fish exposure to GO alone and in combination with heavy metal contaminants (MIX+GO) even at environmentally relevant concentrations causes health risks that cannot be ignored.

Antimicrobial Effectiveness of Innovative Photocatalysts: A Review

Waterborne pathogens represent one of the most widespread environmental concerns. Conventional disinfection methods, including chlorination and UV, pose several operational and environmental problems; namely, formation of potentially hazardous disinfection by-products (DBPs) and high energy consumption. Therefore, there is high demand for effective, low-cost disinfection treatments. Among advanced oxidation processes, the photocatalytic process, a form of green technology, is becoming increasingly attractive. A systematic review was carried out on the synthesis, characterization, toxicity, and antimicrobial performance of innovative engineered photocatalysts. In recent decades, various engineered photocatalysts have been developed to overcome the limits of conventional photocatalysts using different synthesis methods, and these are discussed together with the main parameters influencing the process behaviors. The potential environmental risks of engineered photocatalysts are also addressed, considering the toxicity effects presented in the literature.

Magnetic visible-light activated photocatalyst ZnFe2O4/BiVO4/g-C3N4 for decomposition of antibiotic lomefloxacin: Photocatalytic mechanism, degradation pathway, and toxicity assessment

Magnetic ZnFe₂O₄/BiVO₄/g-C₃N₄ (ZBC) composites were prepared via a facile hydrothermal and calcination method for the degradation of a representative antibiotics lomefloxacin (LFX) under visible light irradiation. The optimal photocatalyst ZBC-10 with a ZnFe₂O₄:BiVO₄:g-C₃N₄ mass ratio of 1:8:10 performed 96.1% removal of LFX after 105 min of illumination. The excellent performance is ascribed to the effective construction of heterojunctions and its capacity to form a double Z-scheme charge transmission pathway among the hosts in ZBC-10. The composite enhanced the separation and migration of photoexcited charge carriers and the effective generation of multiple active radicals including ·OH, ·O₂^-, and ¹O₂. The LFX degradation process, identified based on an integrated HPLC-Q-TOF-MS analysis and density functional theory computation of the Fukui indices, comprised of three pathways initiated by the opening of the piperazinyl ring, separation of piperazinyl and quinoline moieties, and cleavage of the pyridine ring on the quinoline moieties. Ecotoxicological evaluation confirmed the reduced toxicity of transformation intermediates over photocatalysis. Convenient magnetic recovery, high performance, and high recyclability made ZBC-10 a promising visible-light-activated photocatalyst for practical implementation in eliminating antibiotics from wastewater.

Insight into Potassium Vanadates as Visible-Light-Driven Photocatalysts: Synthesis of V(IV)-Rich Nano/Microstructures for the Photodegradation of Methylene Blue

Photocatalysis is regarded as a promising tool for wastewater remediation. In recent years, many studies have focused on investigating novel photocatalysts driven by visible light. In this study, K₂V₆O₁₆·nH₂O nanobelts and KV₃O₈ microplatelets were synthesized and investigated as photocatalysts. Samples were obtained via the facile method based on liquid-phase exfoliation with ion exchange. By changing the synthesis temperature (20–80 °C), different compositions, morphologies, and V⁴⁺/V⁵⁺ ratios were obtained and investigated as photocatalysts for organic dye degradation. Potassium vanadates’ structural, morphological, and optical properties were characterized using X-ray diffraction(XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Physical Property Measurement System (PPMS), thermogravimetric analysis (TGA) with mass spectrometry (MS), N₂ adsorption, scanning electron microscopy (SEM), photoluminescence (PL), and UV–vis diffuse reflectance spectroscopy (DRS). Synthesized K₂V₆O₁₆·nH₂O and KV₃O₈ showed an efficient absorption in the visible wavelength region with a narrow band gap energy of 1.80 and 1.91 eV, respectively. Their photocatalytic activity was evaluated by the degradation of methylene blue (MB) under simulated solar light illumination. The KV₃O₈ microplatelets exhibited the greatest photocatalytic activity, resulting in more than 90% degradation of the dye within the first 30 min. It is suggested that the observed excellent photocatalytic performance is attributed to the high content of V⁴⁺ species. Furthermore, the influence of active species was investigated, and the mechanism responsible for the photodegradation of the MB dye was discussed for the first time for potassium vanadates.

Potassium vanadates were synthesized via the facile method based on liquid-phase exfoliation with ion exchange. Different synthesis temperatures (20−80 °C) resulted in various phase compositions, morphologies, and V⁴⁺/V⁵⁺ ratios. The obtained samples were demonstrated as efficient visible-light driven photocatalysts, resulting in more than 90% degradation of methylene blue within the first 30−60 min. The enhanced photoactivity is attributed to the high content of V⁴⁺ species, which are beneficial for the separation of photogenerated electrons and holes and their lifetime.

Vanadium Species-Assisted Photochemical Vapor Generation for Direct Detection of Trace Tellurium with Inductively Coupled Plasma Mass Spectrometry

Photochemical vapor generation (PVG) is emerging as an alternative sample introduction method in the field of atomic spectrometry. The addition of transition metals can largely improve the PVG yields of elements with the enhancement of 1.4 to 30 000-fold, based on previous reports. In this work, the use of vanadium species as novel "sensitizers" in PVG was first reported, tellurium (Te) was selected as the target. The efficient photochemical reduction of Te was observed in the presence of 9% (v/v) formic acid (FA), 20%(v/v) acetic acid (AA), and 40 mg L^-1 of V(V) (existing as VO₃^-) with the conversion efficiency of 87 ± 3%. Under the selected conditions, there was no significant difference in analytical sensitivity between Te(IV) and Te(VI), making the direct detection of total Te possible. The limit of detection (LOD, 3σ) was 2.9 ng L^-1 for Te with inductively coupled plasma mass spectrometry (ICP MS) measurement. Good precisions of 2.3% and 2.2% (relative standard deviations, RSD) for seven times replicate measurement of 0.5 μg L^-1 Te(IV) and Te(VI) standard solutions were obtained. The sensitivity was enhanced about 55-fold compared to that using traditional direct solution nebulization. The method was applied for the determination of trace Te in three water samples and two certified reference materials of sediment with satisfactory results. The possible mechanism was investigated. The generation of volatile vanadium along with (CH₃)₂Te was found in PVG for the first time. The new findings in this work will be helpful for exploration of efficient "sensitizers" in PVG and further expanding the scope of elements amenable to PVG as well.

Efficient catalytic activity of BiVO4 nanostructures by crystal facet regulation for environmental remediation

Controlled growth of BiVO₄ nanostructures along (121) and (040) crystal facets plays a crucial role in enhancing their catalytic performance. In this regard, the visible light active photocatalyst BiVO₄ was synthesized concerning the effect of pH and surfactants by hydrothermal method. The morphology and size of BiVO₄ are strongly dependent on the concentration of H⁺ and Bi³⁺ in the reaction system while varying the pH. Further, the significant role of cationic surfactant for obtaining the morphology of the spherical nanoparticles of BiVO₄ powders with size 55 nm was analyzed. Adsorption behavior of as-synthesized samples was investigated through Langmuir isotherm model. The catalytic performance of BiVO₄ photocatalyst with the degradation efficiency of 98.79% and 15.58% over the methylene blue (MB) and methyl orange (MO) dyes were noticed within 60 min of light irradiation respectively. The enhanced and declined catalytic activity was well correlated with the surface charge of BiVO₄ photocatalyst towards the MB and MO dyes respectively. Further, the photocatalytic activity of mixed anionic and cationic dyes was performed. The degradation pathway of MB dye was analyzed by LC-MS for the identification of intermediate products. From the obtained results, the proposed possible photocatalytic mechanism reported.

Controlled Synthesis and Structural Modulation to Boost Intrinsic Photocatalytic Activity of BiVO4

Modulation of the structure, composition, and morphology through a simple refinement of the synthetic parameters are central to obtaining signature catalytic properties, enabling an understanding of the underlying growth and...

Synthesis, molecular dynamics simulation and adsorption study of different pollutants on functionalized mesosilica

Experimental and computational works were carried out on a new type of mesoporous silica. In the experimental section, functionalized hollow mesosilica spheres were prepared via a facile technique and then evaluated using some analytical techniques (FESEM, TEM, L-XRD, FTIR, BET-BJH, and TGA). The obtained results revealed that the synthesized material had hollow structure with a diamino-grafted porous shell. The molecular separation of crystal Violet (CV) and neutral Red (NR) dyes from water were investigated by adsorption process using the synthesized powder. Influence of adsorbent loading was evaluated as adsorption ability and dyes removal efficiency. Also, the obtained modeling results revealed appropriate fitting of data with non-linear Langmuir model. The theoretical studies were employed to study the adsorption and removal mechanism of cationic (CV and NR) and anionic (orange II (OII)) dyes using molecular dynamics calculations. Moreover, the simulation outcomes provided valuable information about quantum chemical properties including the HOMO-LUMO maps, chemical reactivity, global softness (σ) and hardness (η) for silica-linker-water-dyes components.

Role of the Sulphur Source in the Solvothermal Synthesis of Ag-CdS Photocatalysts: Effects on the Structure and Photoactivity for Hydrogen Production

The aim of this work is to study the influence of the sulphur source (elemental sulphur, thiourea and L-cysteine) in the solvothermal synthesis of Ag-CdS over its growth, structuration and state of Ag and how these changes influence on its photoactivity. The differences in the generation rate of the S2− from the sulphur sources during the solvothermal synthesis determine the nucleation and growth pathways of CdS affecting to the silver state and its incorporation into the CdS lattice. The hydrogen production on Ag-CdS photocatalysts decreases according the sequence: thiourea > elemental sulphur >> L-cysteine. The changes in the photoactivity of Ag-CdS samples are analysed in terms of the differences in the insertion of Ag+ into the CdS lattice, the formation of composites between CdS and Ag2S and the formation of CdS crystalline domains with strong confinement effect derived from the different sulphur source used in the solvothermal synthesis.