Role of Salvinia molesta in biodecolorization of methyl orange dye from water

Effect of Fenton process as a pretreatment in the phytoremediation of metronidazole by Scirpus lacustris

The present study evaluated the effect of the Fenton process as pretreatment for metronidazole (MNZ) removal coupled with a phytoremediation system using Scirpus lacustris as macrophyte. Initial concentrations of 0.5, 5, 10, 15, and 20 mg MNZ/L were studied in batch cultures. Results obtained in the MNZ removal by phytoremediation showed efficiencies of 93 ± 2%, 81 ± 4%, 85 ± 1%, 84 ± 2%, and 87 ± 6%, respectively. The metronidazole pretreated by the Fenton process and subsequently fed to the phytoremediation system increased the removal efficiencies up to 93 ± 3%, 99 ± 1%, 99 ± 4%, 94 ± 2%, and 94 ± 3%, respectively. Individual studies with Scirpus lacustris in touch with metronidazole displayed relative growth rates of 0.02-0.04 d-1, showing the not toxic effect of the antibiotic on the macrophyte growth. On the other hand, the BMG kinetic model best describes the removal of MNZ by phytoremediation. Finally, applying the Fenton process as a pretreatment makes the MNZ more assimilable for the phytoremediation system, converting the integration of Fenton with the phytoremediation like other attractive technology to be considered in removing emerging compounds.

An Efficient p-n Heterojunction Copper Tin Sulfide/g-C3N4 Nanocomposite for Methyl Orange Photodegradation

The discharge of toxic dye effluents from industry is a major concern for environmental pollution and toxicity. These toxic dyes can be efficiently removed from waste streams using a photocatalysis process involving visible light. Due to its simple synthesis procedure, inexpensive precursor, and robust stability, graphitic carbon nitride (g-C3N4, or CN) has been used as a visible light responsive catalyst for the degradation of dyes with mediocre performance because it is limited by its low visible light harvesting capability due to its wide bandgap and fast carrier recombination rate. To overcome these limitations and enhance the performance of g-C3N4, it was coupled with a narrow bandgap copper tin sulfide (CTS) semiconductor to form a p-n heterojunction. CTS and g-C3N4 were selected due to their good stability, low toxicity, ease of synthesis, layered sheet/plate-like morphology, and relatively abundant precursors. Accordingly, a series of copper tin sulfide/graphitic carbon nitride nanocomposites (CTS/g-C3N4) with varying CTS contents were successfully synthesized via a simple two-step process involving thermal pyrolysis and coprecipitation for visible-light-induced photocatalytic degradation of methyl orange (MO) dye. The photocatalytic activity results showed that the 50%(wt/wt) CTS/g-C3N4 composite displayed a remarkable degradation efficiency of 95.6% for MO dye under visible light illumination for 120 min, which is higher than that of either pristine CTS or g-C3N4. The improved performance is attributed to the extended light absorption range (due to the optimized bandgap), effective suppression of photoinduced electron-hole recombination, and improved charge transfer that arose from the formation of a p-n heterojunction, as evidenced by electrochemical impedance spectroscopy (EIS), photocurrent, and photoluminescence results. Moreover, the results of the reusability study showed that the composite has excellent stability, indicating its potential for the degradation of MO and other toxic organic dyes from waste streams.

Phytobial remediation advances and application of omics and artificial intelligence: a review

Industrialization and urbanization increased the use of chemicals in agriculture, vehicular emissions, etc., and spoiled all environmental sectors. It causes various problems among living beings at multiple levels and concentrations. Phytoremediation and microbial association are emerging as a potential method for removing heavy metals and other contaminants from soil. The treatment uses plant physiology and metabolism to remove or clean up various soil contaminants efficiently. In recent years, omics and artificial intelligence have been seen as powerful techniques for phytobial remediation. Recently, AI and modeling are used to analyze large data generated by omics technologies. Machine learning algorithms can be used to develop predictive models that can help guide the selection of the most appropriate plant and plant growth-promoting rhizobacteria combination that is most effective at remediation. In this review, emphasis is given to the phytoremediation techniques being explored worldwide in soil contamination.

Sorption behavior of chitosan nanoparticles for single and binary removal of cationic and anionic dyes from aqueous solution

In this study, chitosan nanoparticles (ChNs) were used as an adsorbent for single and simultaneous uptake of cationic (methylene blue (MB)) and anionic (methyl orange (MO)) dyes. ChNs were prepared based on the ionic gelation method using sodium tripolyphosphate (TPP) and characterized by zetasizer, FTIR, BET, SEM, XRD, and pHPZC. The studied parameters that affect removal efficiency included pH, time, and dyes' concentration. The results showed that in single-adsorption mode, the removal of MB is better in alkaline pH, contrary to MO uptake which presents higher removal efficiency in acidic media. The simultaneous removal of MB and MO from the mixture solution by ChNs could be achieved under neutral conditions. The adsorption kinetic results showed that adsorption of MB and MO for both single-adsorption and binary adsorption systems comply with the pseudo-second-order model. Langmuir, Freundlich, and Redlich-Peterson isotherms were used for the mathematical description of single-adsorption equilibrium, while non-modified Langmuir and extended Freundlich isotherms were used to fit the co-adsorption equilibrium results. The maximum adsorption capacities of MB and MO in a single dye adsorption system were 315.01 and 257.05 mg/g for MB and MO, respectively. On the other hand, and for binary adsorption system, the adsorption capacities were 49.05 and 137.03 mg/g, respectively. The adsorption capacity of MB decreases in solution containing MO and vice versa, suggesting an antagonistic behavior of MB and MO on ChNs. Overall, ChNs could be a candidate for single and binary removal of MB and MO in dye-containing wastewater.

Facile synthesis of TiO2@ZnO nanoparticles for enhanced removal of methyl orange and indigo carmine dyes: Adsorption, kinetics

Water pollution represents one of the most important problems affecting the health of living organisms, so it was necessary to work on the formation of active materials to get rid of pollutants. In this study, Titanium dioxide (TiO2) doping Zinc oxide (ZnO) nanocomposites were produced via simple sonication method at 500 Hz in ethanol medium. At different weight concentrations (2.5, 5, 7.5, and 10 %). The morphology, structure configuration, chemical bonding, crystalline phase, and surface properties of obtained nanocomposites were characterized via FESEM, BET, XRD, XPS, RAMAN and FTIR instrumentation. The nanocomposites were employed as an adsorbent to eliminate the methyl orange (MO) and Indigo Carmine (IC) dyes from an aqueous solution. Batch removal experiments revealed that the elimination of MO and IC dyes by the TiZnO surface was pH and doping Ti concentration-dependent, with maximum removal occurring at pH = 7 for MO and pH = 3 for IC contaminants at 10 % doping Ti concentration (Ti (10 %)@ZnO). Langmuir model fit the absorptive removal of MO and IC dyes into the Ti (10 %)@ZnO surface well. The maximal removal capacity of Ti (10 %)@ZnO nanocomposite was found to be 994.24 mg. g-1 for MO and 305.39 mg. g-1 for IC. The Ti (10 %)@ZnO nanocomposite showed remarkable high stability towards the removal of both dyes through consecutive four cycles.

Interface synthesis of Cu-BTC/PVDF hybrid membranes and their selective adsorption activity toward Congo red

Considering the surface affinity of MOFs and separation advantages of polymer membranes, herein, a one-step interface synthesis strategy is used in the construction of Cu-BTC/PVDF hybrid membranes, in which Cu2+ ions and 1,3,5-benzenetricarboxylic acid (H3BTC) were dissolved in ionized water and n-octanol separately, and polyvinylidene fluoride (PVDF) films were laid at the interface of two immiscible solvents. As a result, Cu-BTC was generated and readily self-assembled inside the PVDF films. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA) and the Brunauer-Emmett-Teller (BET) method were used to characterize Cu-BTC/PVDF hybrid membranes, and Congo red (CR) was selected as the target dye to evaluate the surface adsorption activity of the hybrid membranes. Batch adsorption tests under various conditions were conducted to optimize the adsorption capacity, adsorption kinetics, isotherms and thermodynamics, which were analyzed to further explore the adsorption behavior. Based on this, the adsorption mechanism was discussed. It is worth noting that because of the π-π stacking interaction and hydrogen bonding, an extraordinary adsorption capacity of CR was achieved, and the good separation advantage and the cyclic adsorption performances endow the resulting Cu-BTC/PVDF hybrid membranes with promising applications in the removal of organic dyes from practical wastewater.

Environmental and human facets of the waterweed proliferation in a Vast Tropical Ramsar Wetland-Vembanad Lake System

The Vembanad Lake and its associated low-lying areas and network of canals (hereafter VBL) form the major part of India's second-largest Ramsar wetland (1512 km²) located in Kerala State along India's southwest coast. The extensive VBL has a large fishery, inland waterways, and popular tourist attractions that support the livelihoods of thousands of people. Over the last several decades, the proliferation of water weeds in the VBL has alarmingly increased, causing many adverse ecological and socioeconomic effects. This study based on a review and synthesis of long-term data introduced the environmental and human dimensions of water weed proliferation in the VBL. Eichhornia (= Pontederia) crassipes, Monochoria vaginalis, Salvinia molesta, Limnocharis flava, Pistia stratiotes, and Hydrilla verticillata are the most troublesome water weeds in the VBL, with the first three being the most widespread. They were mostly imported to India long ago before becoming a part of the VBL. These weeds harmed water quality, waterways, agriculture, fisheries, disease vector management, as well as the vertical and horizontal shrinkage of the VBL through increased siltation and faster ecological succession. The inherently fragile VBL was harmed by extensive and long-term reclamation, the construction of saltwater barrages, and many landfill roads that crisscross water bodies serving as coastal dams, creating water stagnation by blocking natural flushing/ventilation by periodic tides from the adjacent southeastern Arabian Sea. These ecological imbalances were exacerbated by excessive fertiliser use in agricultural areas, as well as the addition of nutrient-rich domestic and municipal sewage, which provided an adequate supply of nutrients and a favourable habitat for the expansion of water weeds. Furthermore, because of recurrent floods and a changing ecology in the VBL, the water weed proliferation has become a more significant problem, with the potential to disrupt their current distribution pattern and spread in the future.

g-C3N4 Based Photocatalyst for the Efficient Photodegradation of Toxic Methyl Orange Dye: Recent Modifications and Future Perspectives

Industrial effluents containing dyes are the dominant pollutants, making the drinking water unfit. Among the dyes, methylene orange (MO) dye is mutagenic, carcinogenic and toxic to aquatic organisms. Therefore, its removal from water bodies through effective and economical approach is gaining increased attention in the last decades. Photocatalytic degradation has the ability to convert economically complex dye molecules into non-toxic and smaller species via redox reactions, by using photocatalysts. g-C₃N₄ is a metal-free n-type semiconductor, typical nonmetallic and non-toxici polymeric photocatalyst. It widely used in photocatalytic materials, due to its easy and simple synthesis, fascinating electronic band structure, high stability and abundant availability. As a photocatalyst, its major drawbacks are its limited efficiency in separating photo-excited electron-hole pairs, high separated charge recombination, low specific surface area, and low absorption coefficient. In this review, we report the recent modification strategies adopted for g-C₃N₄ for the efficient photodegradation of MO dye. The different modification approaches, such as nanocomposites and heterojunctions, as well as doping and defect introductions, are briefly discussed. The mechanism of the photodegradation of MO dye by g-C₃N₄ and future perspectives are discussed. This review paper will predict strategies for the fabrication of an efficient g-C₃N₄-based photocatalyst for the photodegradation of MO dye.

Textile wastewater phytoremediation using Spirodela polyrhiza (L.) Schleid. assisted by novel bacterial consortium in a two-step remediation system

The study aims at developing a phyto-microremediation system for textile wastewater treatment using Spirodela polyrhiza (L.) Schleid. and a consortium of bacterial strains isolated from textile wastewater-contaminated matrices and rhizosphere of S. polyrhiza. The sequential phyto-microremediation of textile wastewater was carried out utilizing two-stage phyto-microremediation systems I [phytoremediation system (Stage 1) preceded microremediation system (Stage 2)] and II [microremediation system (Stage 1) preceded phytoremediation system (Stage 2)]. Pseudomonas stutzeri, Janibacter anophelis, Bacillus safensis, Bacillus pumilus, Bacillus thuringiensis, and Bacillus cereus constituted the bacterial consortium that was involved in the microremediation of textile wastewater. Biochemical characterization of Spirodela on exposure to untreated textile wastewater showed cadmium and nickel uptake as 26.03 and 22.99 mg g^-1 dw^-1. S. polyrhiza exhibited anatomical changes like distortion in the structure of the xylem, phloem, lower epidermis, and increased aerenchyma formation when remediating textile wastewater. The textile wastewater bioremediation in phyto-microremediation system I gives final reduction of COD 77.36%, color 91.70%, calcium 61.65%, iron 69.41%, nickel 89.30%, cadmium 88.37%, nitrate 70.83%, phosphate 73.11%, and sulfate 75.49%. Further, LC-MS analysis of treated wastewater from phyto-microremediation system I have shown biotransformation of metabolites into simpler compounds like 2-{Bis [4-(2-cyanophenoxy)phenyl]methyl}benzoic acid (C₃₄H₂₂N₂O₄). The FTIR spectrum of bacterial biomass exposed to textile wastewater exhibits substantial shifts of various bands in the IR region for functional groups such as alcohol, alkene, esters, azide, and amine as compared to non-exposed biomass.

A censorious review on the role of natural lignocellulosic fiber waste as a low-cost adsorbent for removal of diverse textile industrial pollutants

BACKGROUND

Textile industries produce fabricated colored products using toxic dyes and other harsh chemicals. It is the responsibility of the textile industries to treat and eliminate these hazardous pollutants. However, due to the growing population demand, the treatment of these hazardous effluents is ineffective and imposes the treatment cost over the end users. The release of partially treated effluents in the environment may cause a severe threat to the ecology and its biota. The critical objective is to treat textile effluents efficiently using agricultural natural fiber waste. Generation of agricultural lignocellulosic fibrous waste increases every year due to growing population demand. Its use in the modern world is limited due to synthetic products. An alternative has enumerated to avoid wastage of fibrous resources and its clean disposal.

OBJECTIVE

The main objective of this review paper discussed the feasibility of lignocellulosic fibers and other lignocellulosic materials as natural low-cost adsorbent.

METHODS

The literature study was performed using Web of Science and Scopus indexed journals. The main factors considered to increase the adsorption ability, including the types of lignocellulosic surface modification techniques were searched with utmost importance for quality results. Intending to summarize the literature survey and provide persuasive content, systematic review process was considered for this novel article.

RESULTS

Out of 230 valuable publications, 159 published articles were considered for the present study until March 2022. The articles surplus with factors affecting adsorption (pH, adsorption dosage, surface area, temperature, initial concentration, contact time, physical and chemical properties of pollutants) and surface modification techniques (physical, chemical, and biological) were considered for this manuscript.

CONCLUSION

Overall, the physical and chemical modification methods are widely used instead of biological methods due to various factors as discussed briefly. Furthermore, the finding of this article supports the fact that the fibrous by-product resources are wasted in various occasions due to the modern lifestyle. Even though there is evidential possibility to implement the low-cost adsorbents, the industries limit their application prospects due to existing technology and financial compromises.

Simultaneous removal of cationic and anionic dyes from simulated industrial effluents using a nature-inspired adsorbent

Alginate-grafted polyaniline (Alg-g-PANI) microparticles were synthesized through the grafting of aniline onto functionalized Alg followed by double crosslinking by glutaraldehyde and calcium chloride. The performance of the developed microparticles as adsorbent in simultaneous removal of malachite green (MG) and congo red (CR) dyes were examined by the batch method. Experimental parameters, including adsorbent amount, pH, initial dyes concentrations, and contact time were optimized. Langmuir and Freundlich adsorption models were employed to explore the equilibrium isotherm. As the Langmuir model results, the maximum adsorption capacities (Q_m) of microparticles for the MG and CR dyes were obtained as 578.3 and 409.6 mgg^-1, respectively. Adsorption kinetics for both dyes were well-fitted with the pseudo-second-order model that confirm the rate-limiting step might be the chemical adsorption. The adsorbent was regenerated via desorption process and was reusable five times without a substantial decrease in its adsorption efficacy in first three cycles. Adsorbent-dyes interactions were computationally evaluated using Gromacs package, and it was found that both MG and CR are able to interact strongly with the adsorbent. In accordance with experimental results, simulation data revealed that MG can be removed more efficiently than those of the CR. As the experimental results, we could conclude that the synthesized Alg-g-PANI microparticles can be used as a nature-inspired adsorbent for simultaneous removals of CR and MG dyes.

Removal of methyl orange using combined ZnO/Fe2O3/ZnO-Zn composite coated to the aluminium foil in the presence of simulated solar radiation

In this paper, the optimal preparative conditions (current density, deposition temperature, calcination temperature) for the original electrochemical synthesis of ZnO-Zn coating on aluminum foil support (ZnAF) were examined and determined the application for the removal of methyl orange (MO). Optimal application conditions for removing MO (volume and concentration of a treated solution) were also determined. In the following, four immobilized ZnO/Fe₂O₃ photocatalysts with different molar ratios of Zn to Fe (0.42, 0.84, 1.68, and 3.36) were synthesized via the chemical precipitation method on optimized electrochemically synthesized ZnAF support. Characterization studies of synthesized materials included SEM-EDS and Raman scattering analyses. The efficiency of these catalysts for MO removal in the presence/absence of simulated solar radiation (SSR) was investigated. The adsorption isotherms were investigated, and the results show that the adsorption data were best fitted with the Freundlich adsorption isotherm model. Assessment of the thermodynamic parameters showed that although the adsorption process was weakly endothermic over the range of temperatures studied, the relatively high entropy change gave an overall negative change in Gibbs free energy making the processes spontaneous. In the presence of SSR, the optimal molar ratio of Zn to Fe was determined to be 1.68. The possibility of potential reusing the catalyst was examined six times in a row. The possibility for multiple uses of suspension, which is used for immobilization, was also examined. It was also determined that the application of the 1.68Zn/Fe/ZnAF/H₂O₂/SSR system after the dye removal generates hydrogen at a rate of 186.5 μmol g^-1 after 6 h. Furthermore, in the presence of SSR and using a suspended form of catalyst, the removal efficiency was 1.6 times higher than the efficiency achieved with immobilized ZnO/Fe₂O₃ catalyst. Using the HPLC method for 1.68Zn/Fe/ZnAF/SSR system, five primary intermediates were found to be formed. The applicability of ZnO/Fe₂O₃/ZnAF for removal of other dyes was also examined.

Phytoremediation of pollutants from wastewater: A concise review

As there is a global water crisis facing the whole world, it is important to find alternative solutions to treat wastewater for reuse. Hence, plants have an effective role in removing pollutants from wastewater, which has been emphasized in this review article. Biological treatment of wastewater can be considered an eco-friendly and cost-effective process that depends on in the future. Living organisms, including plants, can remediate pollutants in wastewater, especially in agricultural fields, such as dyes, heavy metals, hydrocarbons, pharmaceuticals, and pesticides. This review discusses the different activities of plants in pollutant elimination from wastewater and sheds light on the utilization of plants in this scope. This review focuses on the remediation of the most common contaminants present in wastewater, which are difficult to the removal with microorganisms, such as bacteria, fungi, and algae. Moreover, it covers the major role of plants in wastewater treatment and the potential of phytoremediation as a possible solution for the global water crisis.

Integrated physical-biological treatment system for batik industry wastewater: A review on process selection

Batik is well known as one of the unique identifiers of the Southeast Asian region. Several countries that still preserve the batik heritage are Malaysia, Indonesia, China and India. The Batik industry holds a significant place in Malaysia's craft-based industry. In Malaysia, batik motifs and patterns are mostly hand-drawn and painted directly on fabric, therefore, each one is unique. The players in the Batik industry are mostly small businesses and cottage industries, particularly in the states of Kelantan, Terengganu, Pahang, Sabah and Sarawak. However, their market growth and contribution are not synchronized with the treatment system. The wastewater generated by this industry rarely meets standard effluent requirements and regulations, thus worrying the authorities. Batik wastewater is categorized as one of the highly polluted wastewaters. The toxicity of pollutants from batik may reduce environmental quality and pose a risk to human health. Batik wastewater needs extensive treatment, since no complete and appropriate treatment has been applied for so many years in specific batik industries. This paper reviews the batik industry in Malaysia, its wastewater generation and the available current treatment practices. It discusses integrated treatments of coagulation-flocculation and phytoremediation technology as a batik wastewater treatment process with potential utility in the batik industry. This review may become part of the guidance for the entire batik industry, especially in Malaysia.

Comparative performance of Scirpus grossus for phytotreating mixed dye wastewater in batch and continuous pilot subsurface constructed wetland systems

Dye is one of the pollutants found in water bodies because of the increased growth of the textile industry. In this study, Scirpus grossus was planted inside a constructed wetland to treat mixed dye (methylene blue and methyl orange)-containing wastewater under batch and continuous modes. The plants were exposed to various concentrations (0, 50, 75, and 100 mg/L) of mixed dye for 72 days (with hydraulic retention time of 7 days for the continuous system). Biological oxygen demand, chemical oxygen demand, total organic carbon, pH, temperature, ionic content, and plant growth parameters were measured. Results showed that S. grossus can withstand all the tested dye concentrations until the end of the treatment period. Color removal efficiencies of 86, 84, and 75% were obtained in batch mode, whereas 90%, 85%, and 79% were obtained in continuous mode for 50, 75, and 100 mg/L dye concentrations, respectively. Fourier-transform infrared analysis confirmed the transformation of dye compounds after treatment and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy analysis showed that most of the intermediate compounds were not absorbed into plants but adsorbed onto the surface of the root structure.

Integrated emergent-floating planted reactor for textile effluent: Removal potential, optimization of operational conditions and potential forthcoming waste management strategy

Native emergent and floating plants; local reed grass (Phragmites karka) and water hyacinth (Eichhornia crassipes), respectively, were used to treat textile wastewater using an integrated emergent-floating planted reactor (IEFPR) system at hydraulic retention times (HRTs) of 8, 14, and 19 days. Real textile effluent having characteristics of 1686.3 ADMI for colour, 535 mg/L for total suspended solid (TSS), 647.7 mg/L for chemical oxygen demand (COD) and 124 mg/L for biochemical oxygen demand (BOD) was used throughout this study. The IEFPR system experienced maximum removal of colour (94.8%, HRT 14 days, day 3), TSS (92.7%, HRT 19 days, day 7), and COD (96.6%, HRT 8 days, day 5) at different HRT and exposure time. The process conditions (HRT and exposure time) were optimized for maximum colour, TSS and COD removal from textile effluent by employing response surface methodology (RSM). The optimization has resulted 100% removal of colour, 87% removal of TSS and 100% removal of COD at HRT of 8 days and exposure time of 5 days, with 0.984 desirability. The integrated plant-assisted treatment system showed reliable performance in treating textile wastewater at optimum operational conditions to improve effluent quality before disposal into water bodies or being recycled into the process. The potential of phytoremediator (produced plant biomass) to be utilized as resources for bioenergy or to be converted into value added products (adsorbent or biochar) provides an alternative to management strategy for better environmental sustainability.

Kinetic Evaluation for Removal of an Anionic Diazo Direct Red 28 by Using Phytoremediation Potential of Salvinia molesta Mitchell

The dye removal using phytoremediation has demonstrated its potential to degrade many recalcitrant dyes. The kinetic investigations for phytoremediation ability of Salvinia molesta Mitchell (S. molesta) were evaluated for Direct Red 28 (DR28) dye in the present research work. The potential of S. molesta was analysed at different pH and different initial dye concentrations. About 90 % of dye decolorization was achieved for 50 mg L^-1 dye solution with 4 g of S. molesta plant at pH 6.5. The experimental results were evaluated with pseudo-first, pseudo-second and Elovich kinetic models. The validation indicated the most suitable curve with Pseudo-second order having the correlation value R² ≥ 0.99. FTIR studies supported the phytoextraction of DR28 through functional group interaction between plant hairy roots and dye molecules. The results of the present studies suggests that S. molesta can be utilized for remediation of water bodies and wetlands contaminated with dye wastewater in natural conditions.

Methyl Orange Biodegradation by Immobilized Consortium Microspheres: Experimental Design Approach, Toxicity Study and Bioaugmentation Potential

Methyl orange (MO) is categorized among the recalcitrant and refractory xenobiotics, representing a significant burden in the ecosystem. To clean-up the surrounding environment, advances in microbial degradation have been made. The main objective of this study was to investigate the extent to which an autochthonous consortium immobilized in alginate beads can promote an efficient biodegradation of MO. By employing response surface methodology (RSM), a parametric model explained the interaction of immobilized consortium (Raoultella planticola, Ochrobactrum thiophenivorans, Bacillus flexus and Staphylococcus xylosus) to assimilate 200 mg/L of MO in the presence of 40 g/L of NaCl within 120 h. Physicochemical analysis, including UV-Vis spectroscopy and FTIR, and monitoring of the degrading enzymes (azoreductase, DCIP reductase, NADH reductase, laccase, LiP, MnP, nitrate reductase and tyrosinase) were used to evaluate MO degradation. In addition, the toxicity of MO-degradation products was investigated by means of phytotoxicity and cytotoxicity. Chlorella vulgaris retained its photosynthetic performance (>78%), as shown by the contents of chlorophyll-a, chlorophyll-b and carotenoids. The viability of normal lung and kidney cell lines was recorded to be 90.63% and 99.23%, respectively, upon exposure to MO-metabolic outcomes. These results reflect the non-toxicity of treated samples, implying their utilization in ferti-irrigation applications and industrial cooling systems. Moreover, the immobilized consortium was employed in the bioremediation of MO from artificially contaminated agricultural and industrial effluents, in augmented and non-augmented systems. Bacterial consortium remediated MO by 155 and 128.5 mg/L in augmented systems of agricultural and industrial effluents, respectively, within 144 h, revealing its mutual synergistic interaction with both indigenous microbiotas despite differences in their chemical, physical and microbial contents. These promising results encourage the application of immobilized consortium in bioaugmentation studies using different resources.

Alternanthera spp. based-phytoremediation for the removal of acetaminophen and methylparaben at mesocosm-scale constructed wetlands

Recently, the spread of pharmaceuticals and personal care products (PPCPs) in the aquatic environment has steadily increased. In this study, phytoremediation technology, using an ornamental plant (Alternanthera spp.), was investigated to improve the removal of acetaminophen (AC) and methylparaben (MP) from a synthetically prepared wastewater. Three exposure lines (AC-line, MP-line and control-line) were performed with a total of 26 subsurface-horizontal constructed wetlands (SSH-CWs) that operated in batch feeding mode. The influence of plants in addition to the initial spiking concentration (20, 60 and 100 mg/L) of AC and MP on the removal efficiency was evaluated throughout the 35-days experiments. The highest removal efficiencies for AC and MP were 88.6% and 66.4%, respectively, achieved in the planted CWs; whereas only 29.7% and 21.9% were achieved in the control CWs for AC and MP, respectively. The results confirmed the role of Alternanthera spp. for accelerating the removal of AC and MP from synthetically contaminated wastewater in CWs.

A review on application of phytoremediation technique for eradication of synthetic dyes by using ornamental plants

Phytoremediation emerges as an innovative and eco-friendly technique to remediate textile dyes with the use of various categories of plants. In recent years, ornamental plants emerge as more attractive and effective substitute in comparison to edible plants for phytoremediation. Regardless of aesthetic value, some ornamental plants can be grown to remediate the sites contaminated with dyes, heavy metals, pesticides, or other organic compounds. In this review, we focus on pioneer research on synthetic dye removal using ornamental plants and evaluate the phytoremediation capability of ornamental plants for treatment of textile effluent. This paper also emphasized specific ornamental plants having high accumulation and tolerance ability for removal of dyes. The mechanisms explored for the phytoremediation of dyes by ornamental plants have also been explained. This review will also be helpful for researchers for exploring more new ornamental plants in phytoremediation technique.

Efficient and Rapid Photocatalytic Degradation of Methyl Orange Dye Using Al/ZnO Nanoparticles

ZnO and Aluminum doped ZnO nanoparticles (Al/ZnO NPs) were successfully synthesized by the sol-gel method. Together with the effect of calcination temperatures (200, 300 and 400 °C) and Al dosage (1%, 3%, 5% and 10%) on structural, morphological and optical properties of Al/ZnO NPs, their photocatalytic degradation of methyl orange (MO) dye was investigated. The calcination temperatures at 200, 300 and 400 °C in forming structure of ZnO NPs led to spherical nanoparticle, nanorod and nanoflake structures with a well-crystalline hexagonal wurtzite, respectively. The ZnO NPs calcined at 200 °C exhibited the highest specific surface area and light absorption property, leading to the MO removal efficiency of 80% after 4 h under the Ultraviolet (UV) light irradiation. The MO removal efficiency was approximately two times higher than the nanoparticles calcined at 400 °C. Furthermore, the 5% Al/ZnO NPs exhibited superior MO removal efficiency of 99% in only 40 min which was approximately 20 times enhancement in photocatalytic activity compared to pristine ZnO under the visible light irradiation. This high degradation performance was attributed to the extended light absorption, narrowed band gap and effective suppression of electron-hole recombination through an addition of Al metal.

Phytoremediation Potential of Freshwater Macrophytes for Treating Dye-Containing Wastewater

Phytoremediation is a promising green technology for the remediation of various industrial effluents. Notably, aquatic plants are widely applied to remove dyes and toxic metals from polluted environments. In the present study, the phytoremediation potency of aquatic macrophytes such as Pistia stratiotes L, Salvinia adnata Desv, and Hydrilla verticillata (L.f) Royle were assessed based on the removal capability of pollutants from dyeing effluent. Physicochemical characterizations were carried out for industrial wastewater collected from a cotton material dyeing unit located in the Karur District of Tamilnadu, India. The physicochemical characteristics of the dyeing effluent, such as color, odor, pH, total dissolved solids (TDS), alkalinity, acidity, chloride, sulfate, phosphate, nitrate, chemical oxygen demand (COD), fluoride, and toxic metal levels were determined. The core parameters such as total dissolved solid (TDS), chemical oxygen demand (COD), and chloride level were determined and found to be 6500 mg/L, 2400 mg/L, and 2050 mg/L, respectively, which exceeded the regulatory limit prescribed by the Central Pollution Control Board of India. The levels of toxic metals such as Hg, Ni, and Zn were under the acceptable concentration but Cr and Pb levels in the dyeing effluent were a little bit higher. The effluent was subjected to treatment with Pistia stratiotes L, Salvinia adnata Desv and Hydrilla verticillata (L.f) Royle separately. After the treatment, the toxic metal results were recorded as below detectable levels and the same results were obtained for all three aquatic plants samples used for treatment. Among the three plants, P. stratiotes L efficiently removed 86% of color, 66% of TDS, 77% of COD, and 61.33% of chloride. The variation in phytochemicals of the macrophytes was studied before and after treatment using GC–MS which revealed the reduction of ascorbic acid in the plant samples. The toxic effect of treated effluent was investigated by irrigating an ornamental plant, Impatiens balsamina L. The plant biomass P. stratiotes L obtained after the treatment process was subjected to manure production and its nutrient quality was proved, which can be applied as a soil conditioner. Among the aquatic plants, the results of P. stratiotes L indicated a higher remediation potential, which can be used as an ecologically benign method for treatment of industrial effluents and water bodies contaminated with dyeing effluents.