Effects of topographical guidance cues on osteoblast cell migration

Methods and computational tools to study eukaryotic cell migration in vitro

Cellular movement is essential for many vital biological functions where it plays a pivotal role both at the single cell level, such as during division or differentiation, and at the macroscopic level within tissues, where coordinated migration is crucial for proper morphogenesis. It also has an impact on various pathological processes, one for all, cancer spreading. Cell migration is a complex phenomenon and diverse experimental methods have been developed aimed at dissecting and analysing its distinct facets independently. In parallel, corresponding analytical procedures and tools have been devised to gain deep insight and interpret experimental results. Here we review established experimental techniques designed to investigate specific aspects of cell migration and present a broad collection of historical as well as cutting-edge computational tools used in quantitative analysis of cell motion.

Hierarchical Surface Pattern on Ni-Free Ti-Based Bulk Metallic Glass to Control Cell Interactions

Ni-free Ti-based bulk metallic glasses (BMGs) are exciting materials for biomedical applications because of their outstanding biocompatibility and advantageous mechanical properties. The glassy nature of BMGs allows them to be shaped and patterned via thermoplastic forming (TPF). This work demonstrates the versatility of the TPF technique to create micro- and nano-patterns and hierarchical structures on Ti40Zr10Cu34Pd14Sn2 BMG. Particularly, a hierarchical structure fabricated by a two-step TPF process integrates 400 nm hexagonal close-packed protrusions on 2.5 µm square protuberances while preserving the advantageous mechanical properties from the as-cast material state. The correlations between thermal history, structure, and mechanical properties are explored. Regarding biocompatibility, Ti40Zr10Cu34Pd14Sn2 BMGs with four surface topographies (flat, micro-patterned, nano-patterned, and hierarchical-structured surfaces) are investigated using Saos-2 cell lines. Alamar Blue assay and live/dead analysis show that all tested surfaces have good cell proliferation and viability. Patterned surfaces are observed to promote the formation of longer filopodia on the edge of the cytoskeleton, leading to star-shaped and dendritic cell morphologies compared with the flat surface. In addition to potential implant applications, TPF-patterned Ti-BMGs enable a high level of order and design flexibility on the surface topography, expanding the available toolbox for studying cell behavior on rigid and ordered surfaces.

Biointerfaces with ultrathin patterns for directional control of cell migration

In the context of wound healing and tissue regeneration, precise control of cell migration direction is deemed crucial. To address this challenge, polydimethylsiloxane (PDMS) platforms with patterned 10 nm thick TiOx in arrowhead shape were designed and fabricated. Remarkably, without tall sidewall constraints, MC3T3-E1 cells seeded on these platforms were constrained to migrate along the tips of the arrowheads, as the cells were guided by the asymmetrical arrowhead tips which provided large contact areas. To the best of our knowledge, this is the first study demonstrating the use of thin TiOx arrowhead pattern in combination with a cell-repellent PDMS surface to provide guided cell migration unidirectionally without tall sidewall constraints. Additionally, high-resolution fluorescence imaging revealed that the asymmetrical distribution of focal adhesions, triggered by the patterned TiOx arrowheads with arm lengths of 10, 20, and 35 μm, promoted cell adhesion and protrusion along the arrowhead tip direction, resulting in unidirectional cell migration. These findings have important implications for the design of biointerfaces with ultrathin patterns to precisely control cell migration. Furthermore, microelectrodes were integrated with the patterned TiOx arrowheads to enable dynamic monitoring of cell migration using impedance measurement. This microfluidic device integrated with thin layer of guiding pattern and microelectrodes allows simultaneous control of directional cell migration and characterization of the cell movement of individual MC3T3-E1 cells, offering great potential for the development of biosensors for single-cell monitoring.

Hs27 fibroblast response to contact guidance cues

Contact guidance is the phenomena of how cells respond to the topography of their external environment. The morphological and dynamic cell responses are strongly influenced by topographic features such as lateral and vertical dimensions, namely, ridge and groove widths and groove depth ([Formula: see text], respectively). However, experimental studies that independently quantify the effect of the individual dimensions as well as their coupling on cellular function are still limited. In this work, we perform extensive parametric studies in the dimensional space-well beyond the previously studied range in the literature-to explore topographical effects on morphology and migration of Hs27 fibroblasts via static and dynamic analyses of live cell images. Our static analysis reveals that the [Formula: see text] is most significant, followed by the [Formula: see text]. The fibroblasts appear to be more elongated and aligned in the groove direction as the [Formula: see text] increases, but their trend changes after 725 nm. Interestingly, the cell shape and alignment show a very strong correlation regardless of [Formula: see text]. Our dynamic analysis confirms that directional cell migration is also strongly influenced by the [Formula: see text], while the effect of the [Formula: see text] and [Formula: see text] is statistically insignificant. Directional cell migration, as observed in the static cell behavior, shows the statistically significant transition when the [Formula: see text] is 725 nm, showing the intimate links between cell morphology and migration. We propose possible scenarios to offer mechanistic explanations of the observed cell behavior.

Enhancing Nasopharyngeal Carcinoma Cell Separation with Selective Fibronectin Coating and Topographical Modification on Polydimethylsiloxane Scaffold Platforms

The extracellular matrix (ECM) serves as a complex scaffold with diverse physical dimensions and surface properties influencing NPC cell migration. Polydimethylsiloxane (PDMS), a widely used biocompatible material, is hydrophobic and undesirable for cell seeding. Thus, the establishment of a biomimetic model with varied topographies and surface properties is essential for effective NPC43 cell separation from NP460 cells. This study explored how ECM surface properties influence NP460 and NPC43 cell behaviors via plasma treatments and chemical modifications to alter the platform surface. In addition to the conventional oxygen/nitrogen (O2/N2) plasma treatment, O2 and argon plasma treatments were utilized to modify the platform surface, which increased the hydrophilicity of the PDMS platforms, resulting in enhanced cell adhesion. (3-aminopropyl)triethoxysilane and fibronectin (FN) were used to coat the PDMS platforms uniformly and selectively. The chemical coatings significantly affected cell motility and spreading, as cells exhibited faster migration, elongated cell shapes, and larger spreading areas on FN-coated surfaces. Furthermore, narrower top layer trenches with 5 µm width and a lower concentration of 10 µg/mL FN were coated selectively on the platforms to limit NP460 cell movements and enhance NPC43 cell separation efficiency. A significantly high separation efficiency of 99.4% was achieved on the two-layer scaffold platform with 20/5 µm wide ridge/trench (R/T) as the top layer and 40/10 µm wide R/T as the bottom layer, coupling with 10 µg/mL FN selectively coated on the sidewalls of the top and bottom layers. This work demonstrated an innovative application of selective FN coating to direct cell behavior, offering a new perspective to probe into the subtleties of NPC cell separation efficiency. Moreover, this cost-effective and compact microsystem sets a new benchmark for separating cancer cells.

Mechanical stretching determines the orientation of osteoblast migration and cell division

Osteoblasts alignment and migration are involved in the directional formation of bone matrix and bone remodeling. Many studies have demonstrated that mechanical stretching controls osteoblast morphology and alignment. However, little is known about its effects on osteoblast migration. Here, we investigated changes in the morphology and migration of preosteoblastic MC3T3-E1 cells after the removal of continuous or cyclic stretching. Actin staining and time-lapse recording were performed after stretching removal. The continuous and cyclic groups showed parallel and perpendicular alignment to the stretch direction, respectively. A more elongated cell morphology was observed in the cyclic group than in the continuous group. In both stretch groups, the cells migrated in a direction roughly consistent with the cell alignment. Compared to the other groups, the cells in the cyclic group showed an increased migration velocity and were almost divided in the same direction as the alignment. To summarize, our study showed that mechanical stretching changed cell alignment and morphology in osteoblasts, which affected the direction of migration and cell division, and velocity of migration. These results suggest that mechanical stimulation may modulate the direction of bone tissue formation by inducing the directional migration and cell division of osteoblasts.

Linguistic Analysis Identifies Emergent Biomaterial Fabrication Trends for Orthopaedic Applications

The expanse of publications in tissue engineering (TE) and orthopedic TE (OTE) over the past 20 years presents an opportunity to probe emergent trends in the field to better guide future technologies that can make an impact on musculoskeletal therapies. Leveraging this trove of knowledge, a hierarchical systematic search method and trend analysis using connected network mapping of key terms is developed. Within discrete time intervals, an accelerated publication rate for anatomic orthopedic tissue engineering (AOTE) of osteochondral defects, tendons, menisci, and entheses is identified. Within these growing fields, the top-listed key terms are extracted and stratified into evident categories, such as biomaterials, delivery method, or 3D printing and biofabrication. It is then identified which categories decreased, remained constant, increased, or emerged over time, identifying the specific emergent categories currently driving innovation in orthopedic repair technologies. Together, these data demonstrate a significant convergence of material types and descriptors used across tissue types. From this convergence, design criteria to support future research of anatomic constructs that mimic both the form and function of native tissues are formulated. In summary, this review identifies large-scale trends and predicts new directions in orthopedics that will define future materials and technologies.

Effects of surface patterning and topography on the cellular functions of tissue engineered scaffolds with special reference to 3D bioprinting

The extracellular matrix (ECM) of the tissue organ exhibits a topography from the nano to micrometer range, and the design of scaffolds has been inspired by the host environment. Modern bioprinting aims to replicate the host tissue environment to mimic the native physiological functions. A detailed discussion on the topographical features controlling cell attachment, proliferation, migration, differentiation, and the effect of geometrical design on the wettability and mechanical properties of the scaffold are presented in this review. Moreover, geometrical pattern-mediated stiffness and pore arrangement variations for guiding cell functions have also been discussed. This review also covers the application of designed patterns, gradients, or topographic modulation on 3D bioprinted structures in fabricating the anisotropic features. Finally, this review accounts for the tissue-specific requirements that can be adopted for topography-motivated enhancement of cellular functions during the fabrication process with a special thrust on bioprinting.

Development of a Scaffold-on-a-Chip Platform to Evaluate Cell Infiltration and Osteogenesis on the 3D-Printed Scaffold for Bone Regeneration

Developing a scaffold for efficient and functional bone regeneration remains challenging. To accomplish this goal, a "scaffold-on-a-chip" device was developed as a platform to aid with the evaluation process. The device mimics a microenvironment experienced by a transplanted bone scaffold. The device contains a circular space at the center for scaffold insert and microfluidic channel that encloses the space. Such a design allows for monitoring of cell behavior at the blood-scaffold interphase. MC3T3-E1 cells were cultured with three different types of scaffold inserts to test its capability as an evaluation platform. Cellular behaviors, including migration, morphology, and osteogenesis with each scaffold, were analyzed through fluorescence images of live/dead assay and immunocytochemistry. Cellular behaviors, such as migration, morphology, and osteogenesis, were evaluated. The results revealed that our platform could effectively evaluate the osteoconductivity and osteoinductivity of scaffolds with various properties. In conclusion, our proposed platform is expected to replace current in vivo animal models as a highly relevant in vitro platform and can contribute to the fundamental study of bone regeneration.

Mechanical and morphological responses of osteoblast-like cells to two-photon polymerized microgrooved surfaces

Microgrooved surfaces are recognized as an important strategy of tissue engineering to promote the alignment of bone cells. In this work, we have investigated the mechanical and morphological aspects of osteoblasts cells after interaction with different micro-structured polymeric surfaces. Femtosecond laser writing technique was used for the construction of circular and parallel microgrooved patterns in biocompatible polymeric surfaces based on pentaerythritol triacrylate. Additionally, we have studied the influence of the biocompatible TiO₂ nanocrystals (NCs) related to the cell behavior, when incorporated to the photoresin. The atomic force microscopy technique was used to investigate the biomechanical reaction of the human osteoblast-like MG-63 cells for the different microgroove. It was demonstrated that osteoblasts grown on circular microgrooved surfaces exhibited significantly larger Young's modulus compared to cells sown on flat films. Furthermore, we could observe that TiO₂ NCs improved the circular microgrooves effects, resulting in more populated sites, 34% more elongated cells, and increasing the cell stiffness by almost 160%. These results can guide the design and construction of effective scaffold surfaces with circular microgrooves for tissue engineering and bone regeneration.

Enhanced motility and interaction of nasopharyngeal carcinoma with epithelial cells in confined microwells

The three-dimensional (3D) structure of the extracellular matrix and cell-cell contacts are two important cues to altering cell migration behavior and the tumor formation process. In this work, we designed and fabricated microwell arrays with a grating-patterned bottom in polydimethylsiloxane platforms to systematically study the effects of confinement, changes in topography, and cell-cell contacts on the migration behavior of nasopharyngeal carcinoma (NPC43) and immortalized nasopharyngeal epithelial (NP460) cells by time-lapse imaging. When two types of cells were co-cultured in microwells, the migration speed and spreading area of NPC43 cells were significantly increased, which might be attributed to the heterotypic cell-cell contacts with NP460 cells. On a flat surface, NPC43 cells could not form clusters due to the frequent interruptions by the active movements of NP460 cells. However, in 3D microwell arrays, clusters of NPC43 cells formed on the bottom surface while the majority of NP460 cells migrated onto the sidewalls. These cell clusters could be further processed to form spheroids for drug screening. These results also revealed that the 3D microenvironments and cell-cell contacts could have significant implications for NPC cell migration and initiation of tumor formation, which will provide insight for NPC progression and dissemination.

Effects of nanopillars and surface coating on dynamic traction force

The extracellular matrix serves as structural support for cells and provides biophysical and biochemical cues for cell migration. Topography, material, and surface energy can regulate cell migration behaviors. Here, the responses of MC3T3-E1 cells, including migration speed, morphology, and spreading on various platform surfaces, were investigated. Polydimethylsiloxane (PDMS) micropost sensing platforms with nanopillars, silicon oxide, and titanium oxide on top of the microposts were fabricated, and the dynamic cell traction force during migration was monitored. The relationships between various platform surfaces, migration behaviors, and cell traction forces were studied. Compared with the flat PDMS surface, cells on silicon oxide and titanium oxide surfaces showed reduced mobility and less elongation. On the other hand, cells on the nanopillar surface showed more elongation and a higher migration speed than cells on silicon oxide and titanium oxide surfaces. MC3T3-E1 cells on microposts with nanopillars exerted a larger traction force than those on flat PDMS microposts and had more filopodia and long protrusions. Understanding the relationships between platform surface condition, migration behavior, and cell traction force can potentially lead to better control of cell migration in biomaterials capable of promoting tissue repair and regeneration.

Investigating the effect of poly (ɛ-caprolactone) nanofibers scaffolds with random, unidirectionally, and radially aligned morphologies on the Fibroblast cell's attachment and growth behavior

In the last decade, significant progress in tissue engineering, repairing, and replacing organs has been achieved. The design and production of scaffolds for tissue engineering are one of the main areas which have attracted the researcher's interest. In this regard, electrospinning is one of the most popular methods of nanoscale scaffold similar to extracellular matrix production. This paper reports the fabrication of scaffolds consisting of radially aligned PCL nanofibers by utilizing a collector composed of a central point electrode and a peripheral ring electrode. The chemical and physical properties were compared using SEM, FTIR, XRD, and DSC experiments, as well as biological performance using the MTT method and cell morphology with nanofibers with random and unidirectionally morphology. Results of this study showed greater physical and biological properties for radially aligned nanofibers which make them an excellent candidate for wound healing applications due to the guided cell growth on this type of nanofiber.

Engineered barriers regulate osteoblast cell migration in vertical direction

Considering cell migration is essential for understanding physiological processes and diseases. The vertical migration of cells in three dimensions is vital, but most previous studies on cell migration have only focused on two-dimensional horizontal migration. In this paper, cell migration in the vertical direction was studied. Barriers with a height of 1, 5, 10, and 25 µm with grating and arrows in channels as guiding patterns were fabricated. The effects of barrier height and guiding patterns on the vertical migration of MC3T3 cells were explored. The study revealed that taller barriers hinder vertical migration of MC3T3 cells, whereas grating and arrows in channels promote it. The time-lapse and micrograph images showed that as the barrier height increased, the cell climbing angle along the barrier sidewall decreased, and the time taken to climb over the barrier increased. These results indicate that taller barriers increase the difficulty of vertical migration by MC3T3 cells. To promote the vertical migration of MC3T3 cells, 10 µm tall barriers with 18° and 40° sloped sidewalls were fabricated. For barriers with 18° sloped sidewalls, the probability for MC3T3 cells to climb up and down the 10 µm tall barriers was 40.6% and 20.3%, respectively; this is much higher than the migration probability over vertical barriers. This study shows topographic guidance on the vertical migration of MC3T3 cells and broadens the understanding of cell migration in the vertical direction.

Regulation of cell locomotion by nanosecond-laser-induced hydroxyapatite patterning

Hydroxyapatite, an essential mineral in human bones composed mainly of calcium and phosphorus, is widely used to coat bone graft and implant surfaces for enhanced biocompatibility and bone formation. For a strong implant-bone bond, the bone-forming cells must not only adhere to the implant surface but also move to the surface requiring bone formation. However, strong adhesion tends to inhibit cell migration on the surface of hydroxyapatite. Herein, a cell migration highway pattern that can promote cell migration was prepared using a nanosecond laser on hydroxyapatite coating. The developed surface promoted bone-forming cell movement compared with the unpatterned hydroxyapatite surface, and the cell adhesion and movement speed could be controlled by adjusting the pattern width. Live-cell microscopy, cell tracking, and serum protein analysis revealed the fundamental principle of this phenomenon. These findings are applicable to hydroxyapatite-coated biomaterials and can be implemented easily by laser patterning without complicated processes. The cell migration highway can promote and control cell movement while maintaining the existing advantages of hydroxyapatite coatings. Furthermore, it can be applied to the surface treatment of not only implant materials directly bonded to bone but also various implanted biomaterials implanted that require cell movement control.

Chitosan Micro-Grooved Membranes with Increased Asymmetry for the Improvement of the Schwann Cell Response in Nerve Regeneration

Peripheral nerve injuries are a common condition in which a nerve is damaged, affecting more than one million people every year. There are still no efficient therapeutic treatments for these injuries. Artificial scaffolds can offer new opportunities for nerve regeneration applications; in this framework, chitosan is emerging as a promising biomaterial. Here, we set up a simple and effective method for the production of micro-structured chitosan films by solvent casting, with high fidelity in the micro-pattern reproducibility. Three types of chitosan directional micro-grooved patterns, presenting different levels of symmetricity, were developed for application in nerve regenerative medicine: gratings (GR), isosceles triangles (ISO) and scalene triangles (SCA). The directional patterns were tested with a Schwann cell line. The most asymmetric topography (SCA), although it polarized the cell shaping less efficiently, promoted higher cell proliferation and a faster cell migration, both individually and collectively, with a higher directional persistence of motion. Overall, the use of micro-structured asymmetrical directional topographies may be exploited to enhance the nerve regeneration process mediated by chitosan scaffolds.

Directing osteoblastic cell migration on arrays of nanopillars and nanoholes with different aspect ratios

To realize highly directional guidance for cell migration, both micro- and nano-scale topographies were studied to better understand and mimic the complex extracellular matrix environment. Polydimethylsiloxane-based platforms with micro- and nano-topographies were developed to systematically study their guidance effects on cell migration behaviors. Compared to microtopography such as flat surface or grating, nanotopographies such as nanoholes and nanopillars could promote the generation of filopodia and extension of long protrusions with increased migration speed for MC3T3-E1 cells. Although cells on the grating structures showed lower migration speed, more directional cell migration was achieved due to their anisotropic topography compared to nanohole or nanopillar arrays with isotropic structures. To further enhance the cell migration directionality, the nanotopographies were patterned in grating arrangements and the results showed that both nanoholes and nanopillars in grating arrangements introduced more directional cell migration compared to gratings. The effects of physical dimensions of the nanotopographies on cell migration were studied and the results showed that there was less cell elongation and less directional migration of the nanoholes in grating arrangements with increasing depth of nanoholes. However, the nanopillars in grating arrangements showed more cell elongation, more directional migration, and higher migration speed with increasing height of the nanopillars. Platforms with nanopillars in grating arrangements and large height could be used to control cell migration speed and directionality, which could potentially lead to cell sorting and screening.

Radially patterned transplantable biodegradable scaffolds as topographically defined contact guidance platforms for accelerating bone regeneration

BACKGROUND

The healing of large critical-sized bone defects remains a clinical challenge in modern orthopedic medicine. The current gold standard for treating critical-sized bone defects is autologous bone graft; however, it has critical limitations. Bone tissue engineering has been proposed as a viable alternative, not only for replacing the current standard treatment, but also for producing complete regeneration of bone tissue without complex surgical treatments or tissue transplantation. In this study, we proposed a transplantable radially patterned scaffold for bone regeneration that was defined by capillary force lithography technology using biodegradable polycaprolactone polymer.

RESULTS

The radially patterned transplantable biodegradable scaffolds had a radial structure aligned in a central direction. The radially aligned pattern significantly promoted the recruitment of host cells and migration of osteoblasts into the defect site. Furthermore, the transplantable scaffolds promoted regeneration of critical-sized bone defects by inducing cell migration and differentiation.

CONCLUSIONS

Our findings demonstrated that topographically defined radially patterned transplantable biodegradable scaffolds may have great potential for clinical application of bone tissue regeneration.