Flexible sensor with electrophoretic polymerized graphene oxide/PEDOT:PSS composite for voltammetric determination of dopamine concentration

High green index electromagnetic interference shields with semiconducting Bi2S3 fillers in a PEDOT:PSS matrix

Conventional metallic electromagnetic interference (EMI) shields, as well as the emerging 2D material-based shields, meet the shielding effectiveness (SE) needs of most applications. However, their shielding performance is dominated by the reflection of incoming radiation due to their high electrical conductivity, which leads to secondary pollution. This problem is getting exacerbated with the proliferation of electronics and communication networks in modern society. Thus, EMI shields that function dominantly by the absorption of incoming radiation are highly desirable. Such shields would be characterized by a green index, which is the ratio of absorbance over reflectance, close to or greater than one. For nonmagnetic materials, the best way to reduce the undesirable large impedance mismatch is to reduce the effective permittivity of the shield material. Here, we present a new EMI shield with a semiconductor Bi2S3 filler in a conducting PEDOT:PSS polymer matrix, instead of the conventional conductive fillers, to reduce the effective permittivity and demonstrate that even a light loading of only 10% Bi2S3 provides high SE of over 40 dB with a green index value of 0.75. Increasing the filler content to 15 wt% increases the green index close to unity while dropping the SE to 30 dB. The shielding mechanism is explained through electromagnetic parameter measurements and supplemented by density functional theory calculations. This work lays the foundation for the advancement of lightweight and ultrathin green EMI shields with minimum secondary pollution.

Label-Free Electrochemical Dopamine Biosensor Based on Electrospun Nanofibers of Polyaniline/Carbon Nanotube Composites

The development of conducting polymer incorporated with carbon materials-based electrochemical biosensors has been intensively studied due to their excellent electrical, optical, thermal, physical and chemical properties. In this work, a label-free electrochemical dopamine (DA) biosensor based on polyaniline (PANI) and its aminated derivative, i.e., poly(3-aminobenzylamine) (PABA), composited with functionalized multi-walled carbon nanotubes (f-CNTs), was developed to utilize a conducting polymer as a transducing material. The electrospun nanofibers of the composites were fabricated on the surface of fluorine-doped tin oxide (FTO)-coated glass substrate under the optimized condition. The PANI/f-CNTs and PABA/f-CNTs electrospun nanofibers were characterized by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which confirmed the existence of f-CNTs in the composites. The electroactivity of the electrospun nanofibers was investigated in phosphate buffer saline solution using cyclic voltammetry (CV) before being employed for label-free electrochemical detection of DA using differential pulse voltammetry (DPV). The sensing performances including sensitivity, selectivity, stability, repeatability and reproducibility of the fabricated electrospun nanofiber films were also electrochemically evaluated. The electrochemical DA biosensor based on PANI/f-CNTs and PABA/f-CNTs electrospun nanofibers exhibited a sensitivity of 6.88 µA·cm-2·µM-1 and 7.27 µA·cm-2·µM-1 in the linear range of 50-500 nM (R2 = 0.98) with a limit of detection (LOD) of 0.0974 µM and 0.1554 µM, respectively. The obtained DA biosensor showed great stability, repeatability and reproducibility with precious selectivity under the common interferences, i.e., glucose, ascorbic acid and uric acid. Moreover, the developed electrochemical DA biosensor also showed the good reliability under detection of DA in artificial urine.

Real samples sensitive dopamine sensor based on poly 1,3-benzothiazol-2-yl((4-carboxlicphenyl)hydrazono)acetonitrile on a glassy carbon electrode

Herein, a novel electrochemical sensor that was used for the first time for sensitive and selective detection of dopamine (DA) was fabricated. The new sensor is based on the decoration of the glassy carbon electrode surface (GC) with a polymer film of 1,3-Benzothiazol-2-yl((4-carboxlicphenyl)hydrazono)) acetonitrile (poly(BTCA). The prepared (poly(BTCA) was examined by using different techniques such as 1H NMR, 13C NMR, FTIR, and UV-visible spectroscopy. The electrochemical investigations of DA were assessed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results obtained showed that the modifier increased the electrocatalytic efficiency with a noticeable increase in the oxidation peak current of DA in 0.1 M phosphate buffer solution (PBS) at an optimum pH of 7.0 and scan rate of 200 mV/s when compared to unmodified GC. The new sensor displays a good performance for detecting DA with a limit of detection (LOD 3σ), and limit of quantification (LOQ 10σ) are 0.28 nM and 94 nM respectively. The peak current of DA is linearly proportional to the concentration in the range from 0.1 to 10.0 µM. Additionally, the fabricated electrode showed sufficient reproducibility, stability, and selectivity for DA detection in the presence of different interferents. The proposed poly(BTCA)/GCE sensor was effectively applied to detect DA in the biological samples.

Utilizing GO/PEDOT:PSS/PtNPs-enhanced high-stability microelectrode arrays for investigating epilepsy-induced striatal electrophysiology alterations

The striatum plays a crucial role in studying epilepsy, as it is involved in seizure generation and modulation of brain activity. To explore the complex interplay between the striatum and epilepsy, we engineered advanced microelectrode arrays (MEAs) specifically designed for precise monitoring of striatal electrophysiological activities in rats. These observations were made during and following seizure induction, particularly three and 7 days post-initial modeling. The modification of graphene oxide (GO)/poly (3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS)/platinu-m nanoparticles (PtNPs) demonstrated a marked reduction in impedance (10.5 ± 1.1 kΩ), and maintained exceptional stability, with impedance levels remaining consistently low (23 kΩ) even 14 days post-implantation. As seizure intensity escalated, we observed a corresponding increase in neuronal firing rates and local field potential power, with a notable shift towards higher frequency peaks and augmented inter-channel correlation. Significantly, during the grand mal seizures, theta and alpha bands became the dominant frequencies in the local field potential. Compared to the normal group, the spike firing rates on day 3 and 7 post-modeling were significantly higher, accompanied by a decreased firing interval. Power in both delta and theta bands exhibited an increasing trend, correlating with the duration of epilepsy. These findings offer valuable insights into the dynamic processes of striatal neural activity during the initial and latent phases of temporal lobe epilepsy and contribute to our understanding of the neural mechanisms underpinning epilepsy.

Applications of flexible electronics related to cardiocerebral vascular system

Ensuring accessible and high-quality healthcare worldwide requires field-deployable and affordable clinical diagnostic tools with high performance. In recent years, flexible electronics with wearable and implantable capabilities have garnered significant attention from researchers, which functioned as vital clinical diagnostic-assisted tools by real-time signal transmission from interested targets in vivo. As the most crucial and complex system of human body, cardiocerebral vascular system together with heart-brain network attracts researchers inputting profuse and indefatigable efforts on proper flexible electronics design and materials selection, trying to overcome the impassable gulf between vivid organisms and rigid inorganic units. This article reviews recent breakthroughs in flexible electronics specifically applied to cardiocerebral vascular system and heart-brain network. Relevant sensor types and working principles, electronics materials selection and treatment methods are expounded. Applications of flexible electronics related to these interested organs and systems are specially highlighted. Through precedent great working studies, we conclude their merits and point out some limitations in this emerging field, thus will help to pave the way for revolutionary flexible electronics and diagnosis assisted tools development.

Electrodeposited reduced graphene oxide-PEDOT:PSS/Nafion hybrid interface for the simultaneous determination of dopamine and serotonin

The electrochemically deposited reduced graphene oxide-PEDOT:PSS/Nafion (rGO-PP/NF) hybrid material has provided a favorable interface for the simultaneous detection of dopamine (DA) and serotonin (5-HT). The rGO-PP/NF onto the Au seed layer of the flexible substrate was simple, and it was followed by the sequential electrophoretic deposition of GO, reduction at the optimal pH buffer media, electropolymerization of EDOT:PSS, and Nafion coating. The strong electron-transport capacity between rGO-PEDOT:PSS and the negatively charged Nafion matrix might allow the highly sensitive, simultaneous, and selective detection of DA and 5-HT due to its high affinity for cations. In the results of the electrochemical response, well-separated oxidation peaks were observed in a mixture that contained various concentrations of DA and 5-HT. It showed the dynamic sensing of DA and 5-HT in the ranges of 0.5-75 μM and 0.05-50 μM, respectively, and the detection limits of 0.17 and 0.16 μM, respectively. In the mixture of DA and 5-HT, the sensor had a detection limit of 0.1 μM for 5-HT and DA, and its sensitivities of DA and 5-HT were 99.3 and 86 µA/µMcm2. Furthermore, it demonstrated high selectivity, reproducibility, stability, and a recovery property in the human serum spike test that was good enough for the practical use.

Soft, flexible conductivity sensors for ocean salinity monitoring

Flexible electrochemical sensors that measure the concentrations of specific analytes (e.g., ions, molecules, and microorganisms) provide valuable information for medical diagnosis, personal health care, and environmental monitoring. However, the conductive electrodes of such sensors need to be exposed to the surrounding environments like chloride-containing aqueous solutions during their operation, where chloride ions (Cl-) can potentially cause corrosion and dissolution of the sensors, negatively impacting their performance and durability. In this work, we develop soft, flexible conductivity sensors made of gold (Au) electrodes and systematically study their electrochemical behaviors in sodium chloride (NaCl) solutions to prevent chloride-induced corrosion and enhance their sensitivity for marine environmental monitoring. The causes of gold chlorination reactions and polarization effects are identified and effectively prevented by analyzing the effects of direct current (DC) and alternating current (AC) voltages, AC frequencies, and exposed sensing areas of the conductivity (salinity) sensors. Accordingly, a performance diagram is constructed to provide guidance for the selection of operation parameters for the salinity sensor. We also convert the varying impedance values of salinity sensors at different salinity levels into output voltage signals using a voltage divider circuit with an AC voltage (0.6 V) source. The results offer an assessment of the accuracy and response time of the salinity sensors, as well as their potential for integration with data transmission components for real-time ocean monitoring. This study has important implications for the development of soft, flexible, Au-based electrochemical sensors that can operate efficiently in diverse biological fluids and marine environments.

Novel biosensor platform for glucose monitoring via smartphone based on battery-less NFC potentiostat

Near-field communication (NFC) was used to control a portable glucose biosensor for diabetes diagnosis. The system comprised a smartphone and an NFC potentiostat connected to a screen-printed carbon electrode (SPCE) modified with Prussian blue-graphene ink and functionalized with gold nanoparticles-embedded poly (3,4ethylene dioxythiophene):polysulfonic acid coated with glucose oxidase (GOx-AuNPs-PEDOT:PSS/PB-G). GOx catalyzed the glucose redox reaction while the conductivity and sensitivity of the AuNPs-PEDOT:PSS composite enhanced electron transfer to the PB-G, which was used as a mediator. The fabrication process was characterized by scanning electron microscopy (SEM) with energy dispersibe x-ray analysis (EDX). The platform was electrochemically characterized by electrical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The NFC biosensing device was then applied to quantify glucose in human blood serum by amperometry. The linear concentration range and detection limit for glucose were 0.5-500 μM and 0.15 μM, respectively. The accuracy of the device was good and results were in agreement with the results obtained from the standard hospital method. This NFC glucose sensing device can be a simple, sensitive, selective and portable platform for medical diagnosis.

Atomic-level chemical reaction promoting external quantum efficiency of organic photomultiplication photodetector exceeding 108% for weak-light detection

Low-cost, solution-processed photomultiplication organic photodetectors (PM-OPDs) with external quantum efficiency (EQE) above unity have attracted enormous attention. However, their weak-light detection is unpleasant because the anode Ohmic contact causes exacerbation in dark current. Here, we introduce atomic-level chemical reaction in PM-OPDs which can simultaneously suppress dark current and increase EQE via depositing a 0.8 nm thick Al₂O₃ by the atomic layer deposition. Suppression in dark current mainly originates from the built-in anode Schottky junction as a result of work function decrease of hole-transporting layer of which the chemical groups can react chemically with the bottom surface of Al₂O₃ layer at the atomic-level. Such strategy of suppressing dark current is not adverse to charge injection under illumination; instead, responsivity enhancement is realized because charge injection can shift from cathode to anode, of which the neighborhood possesses increased photogenerated carriers. Consequently, weak-light detection limit of the forwardly-biased PM-OPD with Al₂O₃ treatment reaches a remarkable level of 2.5 nW cm^-2, while that of the reversely-biased control is 25 times inferior. Meanwhile, the PM-OPD yields a record high EQE and responsivity of 4.31 × 10⁸% and 1.85 × 10⁶ A W^-1, respectively, outperforming all other polymer-based PM-OPDs.

Fabrication of Hybrid Electrodes by Laser-Induced Forward Transfer for the Detection of Cu2+ Ions

Composites based on poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS)-graphene oxide (GO) are increasingly considered for sensing applications. In this work we aim at patterning and prototyping microscale geometries of PEDOT:PSS: GO composites for the modification of commercially available electrochemical sensors. Here, we demonstrate the laser-induced forward transfer of PEDOT:PSS: GO composites, a remarkably simple procedure that allows for the fast and clean transfer of materials with high resolution for a wide range of laser fluences (450-750 mJ/cm²). We show that it is possible to transfer PEDOT:PSS: GO composites at different ratios (i.e., 25:75 %wt and 50:50 %wt) onto flexible screen-printed electrodes. Furthermore, when testing the functionality of the PEDOT:PSS: GO modified electrodes via LIFT, we could see that both the PEDOT:PSS: GO ratio as well as the addition of an intermediate release layer in the LIFT process plays an important role in the electrochemical response. In particular, the ratio of the oxidation peak current to the reduction peak current is almost twice as high for the sensor with a 50:50 %et PEDOT:PSS: GO pixel. This direct transfer methodology provides a path forward for the prototyping and production of polymer: graphene oxide composite based devices.

Controllable Surface-Grafted MXene Inks for Electromagnetic Wave Modulation and Infrared Anti-Counterfeiting Applications

Two-dimensional transition metal carbide/nitride (MXene) conductive inks are promising for scalable production of printable electronics, electromagnetic devices, and multifunctional coatings. However, the susceptible oxidation and poor rheological property seriously impede the printability of MXene inks and the exploration of functional devices. Here, we proposed a controllable surface grafting strategy for MXene flakes (p-MXene) with prepolymerized polydopamine macromolecules to protect against water and oxygen, enrich surface chemistry, and significantly optimize the rheological properties of the inks. The obtained p-MXene inks can adapt to screen-printing and other high-viscosity processing techniques, facilitating the development of patterned electromagnetic films and coatings. Interestingly, the printed MXene polarizer can freely switch and quantitatively control microwave transmission, giving an inspiring means for smart microwave modulation beyond the commonly reported shielding function. Moreover, the introduction of polydopamine nanoshell enables the infrared emissivity of MXene coating to be adjusted to a large extent, which can produce infrared anti-counterfeiting patterns in a thermal imager. Therefore, multifunctional antioxidant p-MXene inks will greatly extend the potential applications for the next-generation printable electronics and devices.

An innovative model for conductivity of graphene-based system by networked nano-sheets, interphase and tunneling zone

This study presents a simple equation for the conductivity of graphene-filled nanocomposites by considering graphene size, amount of filler in the net, interphase deepness, tunneling size, and properties of the net. The amount of nanoparticles in the net is related to the percolation threshold and effective filler content. The novel model is analyzed using the measured conductivity of numerous examples and the factors' impacts on the conductivity. Both experienced data and parametric examinations verify the correctness of the novel model. Among the studied factors, filler amount and interphase deepness implicitly manage the conductivity from 0 to 7 S/m. It is explained that the interphase amount affects the operative quantity of nanofiller, percolation threshold, and amount of nets.

Rapid and selective detection of dopamine in human serum using an electrochemical sensor based on zinc oxide nanoparticles, nickel phthalocyanines, and carbon nanotubes

Composite materials have gained significant attention owing to the synergistic effects of their constituent materials, thereby facilitating their utilization in new applications or in improving the existing ones. In this study, a composite based on nickel phthalocyanine (NiTsPc), zinc oxide nanoparticles (ZnONPs), and carbon nanotubes (CNT) was developed and subsequently immobilized on a pyrolytic graphite electrode (PGE). The PGE/NiTsPc-ZnONPs-CNT was identified as a selective catalytic hybrid system for detection of neurotransmitter dopamine (DA). The electrochemical and morphological characterizations were conducted using atomic force microscopy (AFM). Chronoamperometry and differential pulse voltammetry (DPV) were used to detect DA and detection limits of 24 nM and 7.0 nM was found, respectively. In addition, the effects of some possible DA interferents, such as ascorbic acid, uric acid, and serotonin, on DA response were evaluated. Their presence did not show significant variations in the DA electrochemical response. The high specificity and sensitivity of PGE/NiTsPc-ZnONPs-CNT for DA enabled its direct detection in human serum without sample pretreatment as well as in DA-enriched serum samples, whose recovery levels were close to 100%, thereby confirming the effectiveness of the proposed method. In general, PGE/NiTsPc-ZnONPs-CNT is a promising candidate for future applications in clinical diagnosis.

A critical review on clinical evidence of the efficacy of lavender in sleep disorders

Sleep disorders are one of the most prevalent psychiatric diseases. Insomnia is the most common sleep disorder amongst the general population. It is also one of the most frequent complaints in primary healthcare centers. Lavender is called "the broom of the brain" in different oriental traditional medicines. It is one of the most used plants for patients with sleep disorders. This study reviews what is currently known about the use of lavender for sleep disorders in patients with different diseases, from cancers and end-stage renal disease to neurological-psychiatric diseases (e.g., depression, dementia, and autism), respiratory, cardiac, and metabolic diseases. Additionally, its most used administration route is the inhalation of its essential oil (i.e., aromatherapy) alone or in combination by massage. Some limitations of the reviewed literature were discussed briefly. Overall, this critical review provides promising evidence of the lavender efficacy for sleep disorders in a wide variety of populations and diseases. However, further clinical studies with robust design and longer durations of intervention are necessary for more evidence-based judgment on its effect on sleep problems and to investigate its mechanism of action.