Production of high loading insulin nanoparticles suitable for oral delivery by spray drying and freeze drying techniques

Dictyostelium Differentiation-Inducing Factor 1 Promotes Glucose Uptake via Direct Inhibition of Mitochondrial Malate Dehydrogenase in Mouse 3T3-L1 Cells

Differentiation-inducing factor 1 (DIF-1), found in Dictyostelium discoideum, has antiproliferative and glucose-uptake-promoting activities in mammalian cells. DIF-1 is a potential lead for the development of antitumor and/or antiobesity/antidiabetes drugs, but the mechanisms underlying its actions have not been fully elucidated. In this study, we searched for target molecules of DIF-1 that mediate the actions of DIF-1 in mammalian cells by identifying DIF-1-binding proteins in human cervical cancer HeLa cells and mouse 3T3-L1 fibroblast cells using affinity chromatography and liquid chromatography-tandem mass spectrometry and found mitochondrial malate dehydrogenase (MDH2) to be a DIF-1-binding protein in both cell lines. Since DIF-1 has been shown to directly inhibit MDH2 activity, we compared the effects of DIF-1 and the MDH2 inhibitor LW6 on the growth of HeLa and 3T3-L1 cells and on glucose uptake in confluent 3T3-L1 cells in vitro. In both HeLa and 3T3-L1 cells, DIF-1 at 10-40 μM dose-dependently suppressed growth, whereas LW6 at 20 μM, but not at 2-10 μM, significantly suppressed growth in these cells. In confluent 3T3-L1 cells, DIF-1 at 10-40 μM significantly promoted glucose uptake, with the strongest effect at 20 μM DIF-1, whereas LW6 at 2-20 μM significantly promoted glucose uptake, with the strongest effect at 10 μM LW6. Western blot analyses showed that LW6 (10 μM) and DIF-1 (20 μM) phosphorylated and, thus, activated AMP kinase in 3T3-L1 cells. Our results suggest that MDH2 inhibition can suppress cell growth and promote glucose uptake in the cells, but appears to promote glucose uptake more strongly than it suppresses cell growth. Thus, DIF-1 may promote glucose uptake, at least in part, via direct inhibition of MDH2 and a subsequent activation of AMP kinase in 3T3-L1 cells.

Construction of chrysophanol loaded nanoparticles with N-octyl-O-sulfate chitosan for enhanced nephroprotective effect

Natural occurring anthraquinone like chrysophanol has been studied because of its anti-diabetic, anti-tumor, anti-inflammatory, hepatoprotective and neuroprotective properties. Nonetheless, its poor water solubility and unstable nature are big concerns in achieving efficient delivery and associated pharmacokinetic and pharmacodynamic effects. Herein, this study sought to solve the above-mentioned problem through development of chrysophanol-loaded nanoparticles to enhance the bioavailability of chrysophanol and to evaluate its anti-renal fibrosis effect in rats. After synthesis of a safe N-octyl-O-sulfate chitosan, we used it to prepare chrysophanol-loaded nanoparticles through dialysis technique before we performed and physical characterization. Also, we tested the stability of the nanoparticles for 21 days at 4 °C and room temperature (25 °C) and evaluated their pharmacokinetics and anti-renal fibrosis effect in rat model of chronic kidney disease (CKD). In terms of results, the nano-preparation demonstrated an acceptable narrow size distribution, wherein the encapsulation rate, size, polydispersed index (PDI) and electrokinetic potential at room temperature were respectively 83.41±0.89 %, 364.88±13.62 nm, 0.192±0.015 and 23.78±1.39 mV. During 21 days of storage, we observed that size of particles and electrokinetic potential altered slightly but the difference was statistically insignificant (p > 0.05). Also, in vitro release studies showed that the formulation reached 84.74 % at 24 h. Chrysophanol nanoparticles showed a 2.57-fold increase in bioavailability compared to unformulated chrysophanol. More importantly, chrysophanol nanoparticles demonstrated certain renal internalization properties and anti-renal fibrosis effects, which could ultimately result in reduced blood-urea nitrogen (BUN), kidney-injury molecule-1 (KIM-1) and serum creatinine (SCr) levels in model rats. In conclusion, the prepared chrysophanol-loaded nanoparticles potentially increased bioavailability and enhanced nephroprotective effects of chrysophanol.

The Advancement and Obstacles in Improving the Stability of Nanocarriers for Precision Drug Delivery in the Field of Nanomedicine

Nanocarriers have emerged as a promising class of nanoscale materials in the fields of drug delivery and biomedical applications. Their unique properties, such as high surface area- tovolume ratios and enhanced permeability and retention effects, enable targeted delivery of therapeutic agents to specific tissues or cells. However, the inherent instability of nanocarriers poses significant challenges to their successful application. This review highlights the importance of nanocarrier stability in biomedical applications and its impact on biocompatibility, targeted drug delivery, long shelf life, drug delivery performance, therapeutic efficacy, reduced side effects, prolonged circulation time, and targeted delivery. Enhancing nanocarrier stability requires careful design, engineering, and optimization of physical and chemical parameters. Various strategies and cutting-edge techniques employed to improve nanocarrier stability are explored, with a focus on their applications in drug delivery. By understanding the advances and challenges in nanocarrier stability, this review aims to contribute to the development and implementation of nanocarrier- based therapies in clinical settings, advancing the field of nanomedicine.

Fast disintegrating dosage forms of mucoadhesive-based nanoparticles for oral insulin delivery: Optimization to in vivo evaluation

The aim of this work was to develop fast disintegrating dosage forms, including fast disintegrating tablets (FDTs) and films (FDFs), for oral insulin delivery incorporating mucoadhesive thiolated chitosan (TCS)-based nanoparticles (NPs). Cyclodextrin (CD)-insulin complexes were formed to prevent insulin from degradation and further optimally prepared NPs in order to improve the mucoadhesive properties. After that, these NPs were incorporated into the dosage forms and then evaluated for their morphology as well as physical and mechanical properties. The disintegration time, insulin content, mucoadhesive properties, insulin release, cytotoxicity, in vivo hypoglycemic effect, and stability of dosage forms were studied. Results showed that the CD-insulin complexes were successfully encapsulated into the mucoadhesive NPs. The 15 %w/w CD-insulin complex-loaded NPs, which were probably dispersed and/or fused into the dosage forms, showed promising characteristics, including rapid disintegration as well as good physical and mechanical properties to withstand erosion during handling and storage. The porous structure of the FDTs promoted liquid flow and induced rapid disintegration. The dosage forms provided buccal mucoadhesion before, during, and/or after the disintegration. The FDFs containing hydroxypropyl β-cyclodextrin (HPβCD)-insulin complex-loaded NPs increased mucoadhesion, increasing insulin release. Furthermore, these dosage forms provided excellent in vivo hypoglycemic response with a prolonged effect in diabetic mice and had no cytotoxicity toward the gingival fibroblast cells. In addition, they were stable at temperatures between 2 and 8 °C for three months. The results indicate that these formulations could be applied as promising dosage forms for use in oral insulin delivery.

Concept for a Unidirectional Release Mucoadhesive Buccal Tablet for Oral Delivery of Antidiabetic Peptide Drugs Such as Insulin, Glucagon-like Peptide 1 (GLP-1), and their Analogs

Injectable peptides such as insulin, glucagon-like peptide 1 (GLP-1), and their agonists are being increasingly used for the treatment of diabetes. Currently, the most common route of administration is injection, which is linked to patient discomfort as well as being subjected to refrigerated storage and the requirement for efficient supply chain logistics. Buccal and sublingual routes are recognized as valid alternatives due to their high accessibility and easy administration. However, there can be several challenges, such as peptide selection, drug encapsulation, and delivery system design, which are linked to the enhancement of drug efficacy and efficiency. By using hydrophobic polymers that do not dissolve in saliva, and by using neutral or positively charged nanoparticles that show better adhesion to the negative charges generated by the sialic acid in the mucus, researchers have attempted to improve drug efficiency and efficacy in buccal delivery. Furthermore, unidirectional films and tablets seem to show the highest bioavailability as compared to sprays and other buccal delivery vehicles. This advantageous attribute can be attributed to their capability to mitigate the impact of saliva and inadvertent gastrointestinal enzymatic digestion, thereby minimizing drug loss. This is especially pertinent as these formulations ensure a more directed drug delivery trajectory, leading to heightened therapeutic outcomes. This communication describes the current state of the art with respect to the creation of nanoparticles containing peptides such as insulin, glucagon-like peptide 1 (GLP-1), and their agonists, and theorizes the production of mucoadhesive unidirectional release buccal tablets or films. Such an approach is more patient-friendly and can improve the lives of millions of diabetics around the world; in addition, these shelf-stable formulations ena a more environmentally friendly and sustainable supply chain network.

Novel therapeutic approach for the treatment of cystic fibrosis based on freeze-dried tridrug microparticles to treat cystic fibrosis

BACKGROUND

Cystic fibrosis is a severe, autosomal recessive disease that shortens life expectancy. According to studies, approximately 27% of patients with CF aged 2-5 years and 60 to 70% of adult patients are infected with P. aeruginosa. The patients experience bronchospasm leading to a persistent contracted state of the airways.

OBJECTIVES

The current work explores the possibility of combining ivacaftor and ciprofloxacin to combat the bacteria. A third drug L-salbutamol would be coated onto the surface of the drug-entrappped microparticles to instantaneously provide relief from bronchoconstriction.

METHODS

The microparticles were prepared using bovine serum albumin and L-leucine using the freeze-drying approach. The process and formulation parameters were optimized. The prepared microparticles were surface coated by L-salbutamol using the dry-blending method. The microparticles were subjected to rigorous in-vitro characterization for entrapment, inhalability, antimicrobial activity, cytotoxicity study and safety. The performance of the microparticles to be loaded into a inhaler was checked by the Anderson cascade impactor.

RESULTS

The freeze-dried microparticles had a particle size of 817.5 ± 5.6 nm with a polydispersity ratio of 0.33. They had a zeta potential of -23.3 ± 1.1 mV. The mass median aerodynamic diameter of the microparticles was 3.75 ± 0.07 μm, and the geometric standard diameter was 1.66 ± 0.033 μm. The microparticles showed good loading efficiency for all three drugs. DSC, SEM, XRD, and FTIR studies confirmed the entrapment of ivacaftor and ciprofloxacin. SEM and TEM scans observed the shape and the smooth surface. Antimicrobial synergism was proven by the agar broth, and dilution technique and the formulation was deemed safe by the results of the MTT assay.

CONCLUSION

Freeze-dried microparticles of ivacaftor, ciprofloxacin, and L-salbutamol could pave way to a hitherto unexplored combination of drugs as a novel approach to treat P. aeruginosa infcetions and bronchoconstriction commonly associated with cystic fibrosis.

Targeted Delivery of Sunitinib by MUC-1 Aptamer-Capped Magnetic Mesoporous Silica Nanoparticles

Magnetic mesoporous silica nanoparticles (MMSNPs) are being widely investigated as multifunctional novel drug delivery systems (DDSs) and play an important role in targeted therapy. Here, magnetic cores were synthesized using the thermal decomposition method. Further, to improve the biocompatibility and pharmacokinetic behavior, mesoporous silica was synthesized using the sol-gel process to coat the magnetic cores. Subsequently, sunitinib (SUN) was loaded into the MMSNPs, and the particles were armed with amine-modified mucin 1 (MUC-1) aptamers. The MMSNPs were characterized using FT-IR, TEM, SEM, electrophoresis gel, DLS, and EDX. MTT assay, flow cytometry analysis, ROS assessment, and mitochondrial membrane potential analysis evaluated the nanoparticles' biological impacts. The physicochemical analysis revealed that the engineered MMSNPs have a smooth surface and spherical shape with an average size of 97.6 nm. The biological in vitro analysis confirmed the highest impacts of the targeted MMSNPs in MUC-1 overexpressing cells (OVCAR-3) compared to the MUC-1 negative MDA-MB-231 cells. In conclusion, the synthesized MMSNP-SUN-MUC-1 nanosystem serves as a unique multifunctional targeted delivery system to combat the MUC-1 overexpressing ovarian cancer cells.

Impact of Freeze- and Spray-Drying Microencapsulation Techniques on β-Glucan Powder Biological Activity: A Comparative Study

The study compares the impact of freeze- and spray-drying (FD, SD) microencapsulation methods on the content of β-glucan, total polyphenols (TP), total flavonoids (TF), phenolic acids (PA), and antioxidant activity (AA) in commercially β-glucan powder (Pleurotus ostreatus) using maltodextrin as a carrier. Morphology (scanning electron microscopy- SEM), yield, moisture content (MC), and water activity (aw) were also evaluated in the samples. Our examinations revealed significant structural differences between powders microencapsulated by the drying methods. As compared to non-encapsulated powder, the SD powder with yield of 44.38 ± 0.55% exhibited more reduced (p < 0.05) values for aw (0.456 ± 0.001) and MC (8.90 ± 0.44%) than the FD one (yield: 27.97 ± 0.33%; aw: 0.506 ± 0.002; MC: 11.30 ± 0.28%). In addition, the highest values for β-glucan content (72.39 ± 0.38%), TPC (3.40 ± 0.17 mg GAE/g), and TFC (3.07 ± 0.29 mg QE/g) have been detected in the SD powder. Our results allow for the conclusion that the SD microencapsulation method using maltodextrin seems to be more powerful in terms of the β-glucan powder yield and its contents of β-glucan, TP, and TF as compared to the FD technique.