General synthesis of primary amines via reductive amination employing a reusable nickel catalyst

Development of Iron-Based Single Atom Materials for General and Efficient Synthesis of Amines

Earth abundant metal-based heterogeneous catalysts with highly active and at the same time stable isolated metal sites constitute a key factor for the advancement of sustainable and cost-effective chemical synthesis. In particular, the development of more practical, and durable iron-based materials is of central interest for organic synthesis, especially for the preparation of chemical products related to life science applications. Here, we report the preparation of Fe-single atom catalysts (Fe-SACs) entrapped in N-doped mesoporous carbon support with unprecedented potential in the preparation of different kinds of amines, which represent privileged class of organic compounds and find increasing application in daily life. The optimal Fe-SACs allow for the reductive amination of a broad range of aldehydes and ketones with ammonia and amines to produce diverse primary, secondary, and tertiary amines including N-methylated products as well as drugs, agrochemicals, and other biomolecules (amino acid esters and amides) utilizing green hydrogen.

Reductive Amination of Aldehyde and Ketone with Ammonia and H2 by an In Situ-Generated Cobalt Catalyst under Mild Conditions

Herein, we present the simplest approach for the synthesis of primary amines via reductive amination using H2 as a reductant and aqueous ammonia as a nitrogen source, catalyzed by amorphous Co particles. The highly active Co particles were prepared in situ by simply mixing commercially available CoCl2 and NaBH4/NaHBEt3 without any ligand or support. This reaction system features mild conditions (80 °C, 1-10 bar), high selectivity (99%), a wide substrate scope, simple operation, and easy separation of the catalyst. The successful large-scale application of this reaction in the production of primary amines suggests its potential industrial interest.

Advances in electrocatalytic dehydrogenation of ethylamine to acetonitrile

The electrocatalytic dehydrogenation of ethylamine (EDH), owing to its high hydrogen content, holds broad prospects in electrochemical hydrogen (H2) production, H2 storage, and addressing energy issues, thus deserving wide attention. In this feature article, we first summarized the fundamentals of thermocatalytic and electrocatalytic EDH and reviewed the recent state-of-the-art advances in catalyst research, specifically platinum group metal (PGM) catalysts and non-PGM catalysts. We systematically discussed the potential applications of electrocatalytic EDH in energy storage and conversion. Finally, we provide our perspective on the key challenges and future developments in this field. We believe this feature article will offer helpful guidance for oriented design and optimization of stable and efficient catalysts for electrocatalytic EDH and related energy applications.

Structural Ni0-Niδ+ Pair Sites for Highly Active Hydrogenation of Nitriles to Primary Amines

Supported metal pair sites have sparked interest due to their tremendous potential as bifunctional catalysts. Here, we report the structural Ni0-Niδ+ pair sites constructed in a well-defined nanocrystal phase of Ni3P. These Ni0-Niδ+ pair sites exhibited a remarkable product formation rate of 123 molBA/molmetal/h for the hydrogenation of benzonitrile (BN) to benzylamine (BA). The heterogeneity of surface Ni atoms over the Ni3P crystal created two types of metal centers, Ni0 and Niδ+, with a specific spatial distance of 4-5 Å. The Ni0 site acted as the center for H2 activation, while the Niδ+ site served as the adsorption and activation center for the C ≡ N group. The highly efficient cooperation effect of Ni0-Niδ+ pair sites resulted in a TOF of 2915 h-1 in BN hydrogenation, which is 2.4 and 9.7 times higher than that over the mono-Ni0 and -Niδ+ sites, respectively.

Desulfurization of Thiols for Nucleophilic Substitution

Although the desulfurization of thiols is a topic of great importance and has received significant attention, most efforts have focused on the hydrodesulfurization of thiols. In this work, we describe the desulfurization of thiols for nucleophilic substitution. This process occurs rapidly, promoted by the Ph3P/ICH2CH2I system, and can be extended to a wide range of nucleophiles. Notably, free amines can be employed as nucleophiles to synthesize various secondary and tertiary amines. This method tolerates a wide array of functional groups, including hydroxyl groups in amination reactions. Benzyl thiols are particularly reactive and can be completely converted at room temperature within 15 min. Although alkyl thiols show lower reactivity, they can also be converted smoothly at a reaction temperature of 70 °C overnight.

Direct Synthesis of N-formamides by Integrating Reductive Amination of Ketones and Aldehydes with CO2 Fixation in a Metal-Organic Framework

Formamides are important feedstocks for the manufacture of many fine chemicals. State-of-the-art synthesis of formamides relies on the use of an excess amount of reagents, giving copious waste and thus poor atom-economy. Here, we report the first example of direct synthesis of N-formamides by coupling two challenging reactions, namely reductive amination of carbonyl compounds, particularly biomass-derived aldehydes and ketones, and fixation of CO2 in the presence of H2 over a metal-organic framework supported ruthenium catalyst, Ru/MFM-300(Cr). Highly selective production of N-formamides has been observed for a wide range of carbonyl compounds. Synchrotron X-ray powder diffraction reveals the presence of strong host-guest binding interactions via hydrogen bonding and parallel-displaced π⋅⋅⋅π interactions between the catalyst and adsorbed substrates facilitating the activation of substrates and promoting selectivity to formamides. The use of multifunctional porous catalysts to integrate CO2 utilisation in the synthesis of formamide products will have a significant impact in the sustainable synthesis of feedstock chemicals.

Air-Stable Ni Catalysts Prepared by Liquid-Phase Reduction Using Hydrosilanes for Reactions with Hydrogen

The liquid-phase reduction method for the preparation of metal nanoparticles (NPs) by the reduction of metal salts or metal complexes in a solvent with a reducing agent is widely used to prepare Ni NPs that exhibit high catalytic activity in various organic transformations. Intensive research has been conducted on control of the morphology and size of Ni NPs by the addition of polymers and long-chain compounds as protective agents; however, these agents typically cause a decrease in catalytic activity. Here, we report on the preparation of Ni NPs using hydrosilane (Ni-Si) as a reducing agent and a size-controlling agent. The substituents on silicon can control not only the size but also the crystal phase of the Ni NPs. The prepared Ni NPs exhibited high catalytic performance for the hydrogenation of unsaturated compounds, aromatics, and heteroaromatics to give the corresponding hydrogenated products in high yields. The unique feature of Ni catalysts prepared by the hydrosilane-assisted method is that the catalysts can be handled under air as opposed to conventional Ni catalysts such as Raney Ni. Characterization studies indicated that the surface hydroxide was reduced under the catalytic reaction conditions with H2 at around 100 °C and with the assistance of organosilicon compounds deposited on the catalyst surface. The hydrosilane-assisted method presented here could be applied to the preparation of supported Ni catalysts (Ni-Si/support). The interaction between the Ni NPs and a metal oxide support enabled the direct amination of alcohols with ammonia to afford the primary amine selectively.

Synthesis of piperidines and pyridine from furfural over a surface single-atom alloy Ru1CoNP catalyst

The sustainable production of value-added N-heterocycles from available biomass allows to reduce the reliance on fossil resources and creates possibilities for economically and ecologically improved synthesis of fine and bulk chemicals. Herein, we present a unique Ru1CoNP/HAP surface single-atom alloy (SSAA) catalyst, which enables a new type of transformation from the bio-based platform chemical furfural to give N-heterocyclic piperidine. In the presence of NH3 and H2, the desired product is formed under mild conditions with a yield up to 93%. Kinetic studies show that the formation of piperidine proceeds via a series of reaction steps. Initially, in this cascade process, furfural amination to furfurylamine takes place, followed by hydrogenation to tetrahydrofurfurylamine (THFAM) and then ring rearrangement to piperidine. DFT calculations suggest that the Ru1CoNP SSAA structure facilitates the direct ring opening of THFAM resulting in 5-amino-1-pentanol which is quickly converted to piperidine. The value of the presented catalytic strategy is highlighted by the synthesis of an actual drug, alkylated piperidines, and pyridine.

Iron phosphide nanocrystals as an air-stable heterogeneous catalyst for liquid-phase nitrile hydrogenation

Iron-based heterogeneous catalysts are ideal metal catalysts owing to their abundance and low-toxicity. However, conventional iron nanoparticle catalysts exhibit extremely low activity in liquid-phase reactions and lack air stability. Previous attempts to encapsulate iron nanoparticles in shell materials toward air stability improvement were offset by the low activity of the iron nanoparticles. To overcome the trade-off between activity and stability in conventional iron nanoparticle catalysts, we developed air-stable iron phosphide nanocrystal catalysts. The iron phosphide nanocrystal exhibits high activity for liquid-phase nitrile hydrogenation, whereas the conventional iron nanoparticles demonstrate no activity. Furthermore, the air stability of the iron phosphide nanocrystal allows facile immobilization on appropriate supports, wherein TiO2 enhances the activity. The resulting TiO2-supported iron phosphide nanocrystal successfully converts various nitriles to primary amines and demonstrates high reusability. The development of air-stable and active iron phosphide nanocrystal catalysts significantly expands the application scope of iron catalysts.

Promoting Amination of Furfural to Furfurylamine by Metal-Support Interactions on Pd/MoO3-x Catalysts

The reductive amination of carbonyl compounds is one of the most straightforward protocols to construct C-N bonds, but highly desires active and selective catalysts. Herein, Pd/MoO3-x catalysts are proposed for furfural amination, in which the interactions between Pd nanoparticles and MoO3-x supports can be easily ameliorated by varying the preparation temperature toward efficient catalytic turnover. Thanks to the synergistic cooperation of MoV -rich MoO3-x and highly dispersed Pd, the optimal catalysts afford the high yield of furfurylamine (84 %) at 80 °C. Thereinto, MoV species not only acts as the acidic promoter to facilitate the activation of carbonyl groups, but also interacts with Pd nanoparticles to promote the subsequent hydrogenolysis of Schiff base N-furfurylidenefurfurylamine and its germinal diamine. The good efficiency of Pd/MoO3-x within a broad substrate scope further highlights the key contribution of metal-support interactions to the refinery of biomass feedstocks.

Streamlining the synthesis of amides using Nickel-based nanocatalysts

The synthesis of amides is a key technology for the preparation of fine and bulk chemicals in industry, as well as the manufacture of a plethora of daily life products. Furthermore, it constitutes a central bond-forming methodology for organic synthesis and provides the basis for the preparation of numerous biomolecules. Here, we present a robust methodology for amide synthesis compared to traditional amidation reactions: the reductive amidation of esters with nitro compounds under additives-free conditions. In the presence of a specific heterogeneous nickel-based catalyst a wide range of amides bearing different functional groups can be selectively prepared in a more step-economy way compared to previous syntheses. The potential value of this protocol is highlighted by the synthesis of drugs, as well as late-stage modifications of bioactive compounds. Based on control experiments, material characterizations, and DFT computations, we suggest metallic nickel and low-valent Ti-species to be crucial factors that makes this direct amide synthesis possible.

Electrochemical C-N coupling of CO2 and nitrogenous small molecules for the electrosynthesis of organonitrogen compounds

Electrochemical C-N coupling reactions based on abundant small molecules (such as CO₂ and N₂) have attracted increasing attention as a new "green synthetic strategy" for the synthesis of organonitrogen compounds, which have been widely used in organic synthesis, materials chemistry, and biochemistry. The traditional technology employed for the synthesis of organonitrogen compounds containing C-N bonds often requires the addition of metal reagents or oxidants under harsh conditions with high energy consumption and environmental concerns. By contrast, electrosynthesis avoids the use of other reducing agents or oxidants by utilizing "electrons", which are the cleanest "reagent" and can reduce the generation of by-products, consistent with the atomic economy and green chemistry. In this study, we present a comprehensive review on the electrosynthesis of high value-added organonitrogens from the abundant CO₂ and nitrogenous small molecules (N₂, NO, NO₂^-, NO₃^-, NH₃, etc.) via the C-N coupling reaction. The associated fundamental concepts, theoretical models, emerging electrocatalysts, and value-added target products, together with the current challenges and future opportunities are discussed. This critical review will greatly increase the understanding of electrochemical C-N coupling reactions, and thus attract research interest in the fixation of carbon and nitrogen.

Development of a General and Selective Nanostructured Cobalt Catalyst for the Hydrogenation of Benzofurans, Indoles and Benzothiophenes

The selective hydrogenation of benzofurans in the presence of a heterogeneous non-noble metal catalyst is reported. The developed optimal catalytic material consists of cobalt-cobalt oxide core-shell nanoparticles supported on silica, which has been prepared by the immobilization and pyrolysis of cobalt-DABCO-citric acid complex on silica under argon at 800 °C. This novel catalyst allows for the selective hydrogenation of simple and functionalized benzofurans to 2,3-dihydrobenzofurans as well as related heterocycles. The versatility of the reported protocol is showcased by the reduction of selected drugs and deuteration of heterocycles. Further, the stability, recycling, and reusability of the Co-nanocatalyst are demonstrated.

Catalytic Reductive Amination of Aromatic Aldehydes on Co-Containing Composites

The performance of a series of cobalt-based composites in catalytic amination of aromatic aldehydes by amines in the presence of hydrogen as well as hydrogenation of quinoline was studied. The composites were prepared by pyrolysis of CoII acetate, organic precursor (imidazole, 1,10-phenantroline, 1,2-diaminobenzene or melamine) deposited on aerosil (SiO2). These composites contained nanoparticles of metallic Co together with N-doped carboneous particles. Quantitative yields of the target amine in a reaction of p-methoxybenzaldehyde with n-butylamine were obtained at p(H2) = 150 bar, T = 150 °C for all composites. It was found that amination of p-methoxybenzaldehyde with n-butylamine and benzylamine at p(H2) = 100 bar, T = 100 °C led to the formation of the corresponding amines with the yields of 72–96%. In the case of diisopropylamine, amination did not occur, and p-methoxybenzyl alcohol was the sole or the major reaction product. Reaction of p-chlorobenzaldehyde with n-butylamine on the Co-containing composites at p(H2) = 100 bar, T = 100 °C resulted in the formation of N-butyl-N-p-chlorobenzylamine in 60–89% yields. Among the considered materials, the composite prepared by decomposition of CoII complex with 1,2-diaminobenzene on aerosil showed the highest yields of the target products and the best selectivity in all studied reactions.

Synthesis, Characterization, and Study of Catalytic Activity of Chiral Cu(II) and Ni(II) Salen Complexes in the α-Amino Acid C-α Alkylation Reaction

A new family of Cu(II) and Ni(II) salen complexes was synthesized and fully characterized through various physicochemical methods. Their catalytic activity was evaluated in the phase transfer C_α-alkylation reaction of the Schiff bases of D,L-alanine ester and benzaldehyde derivatives. It was found that the introduction of a chlorine atom into the ortho- and para-positions of the phenyl ring of the substrate resulted in an increase in both the chemical yield and the asymmetric induction (ee 66-98%). The highest enantiomeric excess was achieved in the case of a Cu(II) salen complex based on (S,S)-cyclohexanediamine and salicylaldehyde at -20 °C. The occurrence of a bulky substituent in the ligand present in the complexes led to a drastic decrease in ee and chemical yield. For instance, the introduction of bulky substituents at positions 3 and 5 of the phenyl ring of the catalyst resulted in a complete loss of the stereoselectivity control in the alkylation reaction.

Upgrading heterogeneous Ni catalysts with thiol modification

Precious metal catalysts are the cornerstone of many industrial processes. Replacing precious metal catalysts with earth-abundant metals is one of key challenges for the green and sustainable development of chemical industry. We report in this work a surprisingly effective strategy toward the development of cost-effective, air-stable, and efficient Ni catalysts by simple surface modification with thiols. The as-prepared catalysts exhibit unprecedentedly high activity and selectivity in the reductive amination of aldehydes/ketones. The thiol modification can not only prevent the deep oxidation of Ni surface to endow the catalyst with long shelf life in air but can also allow the reductive amination to proceed via a non-contact mechanism to selectively produce primary amines. The catalytic performance is far superior to that of precious and non-precious metal catalysts reported in the literature. The wide application scope and high catalytic performance of the developed Ni catalysts make them highly promising for the low-cost, green production of high-value amines in chemical industry.

Chemoselective carbene insertion into the N-H bonds of NH3·H2O

The conversion of inexpensive aqueous ammonia (NH3·H2O) into value-added primary amines by N-H insertion persists as a longstanding challenge in chemistry because of the tendency of Lewis basic ammonia (NH3) to bind and inhibit metal catalysts. Herein, we report a chemoselective carbene N-H insertion of NH3·H2O using a TpBr3Ag-catalyzed two-phase system. Coordination by a homoscorpionate TpBr3 ligand renders silver compatible with NH3 and H2O and enables the generation of electrophilic silver carbene. Water promotes subsequent [1,2]-proton shift to generate N-H insertion products with high chemoselectivity. The result of the reaction is the coupling of an inorganic nitrogen source with either diazo compounds or N-triftosylhydrazones to produce useful primary amines. Further investigations elucidate the reaction mechanism and the origin of chemoselectivity.

Synthesis of 3,4-Dihydro-2H-Pyrroles from Ketones, Aldehydes, and Nitro Alkanes via Hydrogenative Cyclization

Syntheses of N-heterocyclic compounds that permit a flexible introduction of various substitution patterns by using inexpensive and diversely available starting materials are highly desirable. Easy to handle and reusable catalysts based on earth-abundant metals are especially attractive for these syntheses. We report here on the synthesis of 3,4-dihydro-2H-pyrroles via the hydrogenation and cyclization of nitro ketones. The latter are easily accessible from three components: a ketone, an aldehyde and a nitroalkane. Our reaction has a broad scope and 23 of the 33 products synthesized are compounds which have not yet been reported. The key to the general hydrogenation/cyclization reaction is a highly active, selective and reusable nickel catalyst, which was identified from a library of 24 earth-abundant metal catalysts.

General Construction of Amine via Reduction of N=X (X = C, O, H) Bonds Mediated by Supported Nickel Boride Nanoclusters

Amines play an important role in synthesizing drugs, pesticides, dyes, etc. Herein, we report on an efficient catalyst for the general construction of amine mediated by nickel boride nanoclusters supported by a TS-1 molecular sieve. Efficient production of amines was achieved via catalytic hydrogenation of N=X (X = C, O, H) bonds. In addition, the catalyst maintains excellent performance upon recycling. Compared with the previous reports, the high activity, simple preparation and reusability of the Ni-B catalyst in this work make it promising for industrial application in the production of amines.

Base-promoted direct amidation of esters: beyond the current scope and practical applications

The base-promoted direct amidation of unactivated esters is among the most useful reactions for amide bond formation in contemporary organic chemistry. The intensive research in this area has led to the development of a number of new methods to achive this transformation. However, to date, the existing literature is more methodological and in many instances lacks practical directions. Therefore, the full potential of this transformation is yet to be revealed by broadening the substrate scope. In a search for new practical applications of the amidation reaction, herein we present a comprehensive study of a number of base-promoted direct amidations that encompass a wide range of amines and esters. Furthermore, we applied our findings in the synthesis of phosphoramidates and several industrially relevant products.

Ambient-Temperature Reductive Amination of 5-Hydroxymethylfurfural Over Al2 O3 -Supported Carbon-Doped Nickel Catalyst

An efficient catalytic system for the conversion of 5-hydroxymethylfurfural (HMF) into N-containing compounds over low-cost non-noble-metal catalysts is preferable, but it is challenging to reach high conversion and selectivity under mild conditions. Herein, an Al₂ O₃ -supported carbon-doped Ni catalyst was obtained via the direct pyrolysis-reduction of a mixture of Ni₃ (BTC)₂  ⋅ 12H₂ O and Al₂ O₃ , generating stable Ni⁰ species due to the presence of carbon residue. A high yield of 96 % was observed in the reductive amination of HMF into 5-hydroxymethyl furfurylamine (HMFA) with ammonia and hydrogen at ambient temperature. The catalyst was recyclable and could be applied to the ambient-temperature synthesis of HMF-based secondary/tertiary amines and other biomass-derived amines from the carbonyl compounds. The significant performance was attributable to the synergistic effect of Ni⁰ species and acidic property of the support Al₂ O₃ , which promoted the selective ammonolysis of the imine intermediate while inhibiting the potential side reaction of over-hydrogenation.

Reductive Amination of 5-Hydroxymethylfurfural to 2,5-Bis(aminomethyl)furan over Alumina-Supported Ni-Based Catalytic Systems

Mono- and bimetallic Ni-based catalysts were prepared by screening 6 supports and 14 secondary metals for reductive amination of 5-hydroxymethylfurfural (5-HMF) into 2,5-bis(aminomethyl)furan (BAMF), among which γ-Al₂ O₃ and Mn were the best candidates. By further optimization of the reaction conditions at 0.4 g catalyst loading for 0.5 g substrate of 5-HMF and 160 °C of reaction temperature, 10Ni/γ-Al₂ O₃ and 10NiMn(4 : 1)/γ-Al₂ O₃ achieved the highest BAMF yields of 86.3 and 82.1 %, respectively. Although the BAMF yield values were comparable with that over Raney Ni, the turnover frequencies based on the initial BAMF yield and unit weight of Ni for 10NiMn(4 : 1)/γ-Al₂ O₃ , 10Ni/γ-Al₂ O₃ , and Raney Ni were calculated as 0.41, 0.09, and 0.04 h^-1 , respectively. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy showed that the existence of MnO_x well dispersed on the γ-Al₂ O₃ support and its electron transfer effect with Ni particles on the surface of the support contributed to the high efficiency and better recyclability for the five-time reused 10NiMn(4 : 1)/γ-Al₂ O₃ catalyst.

Advances in the Catalytic Reductive Amination of Furfural to Furfural Amine: The Momentous Role of Active Metal Sites

One-pot synthesis of sustainable primary amines by catalytic reductive amination of bio-based carbonyl compounds with NH₃ and H₂ is emerging as a promising and robust approach. The primary amines, especially furfuryl amine (FUA) derived from furfural (FUR), with a wide range of applications from pharmaceuticals to agrochemicals, have attracted much attention due to their versatility. This Review is majorly comprised of two segments on the reductive amination of FUR to FUA, one with precious (Ru, Pd, Rh) and the other with non-precious (Co, Ni) metals on different supports and in various solvent systems in the presence of NH₃ and H₂ . The active metal sites generated on multiple supports are accentuated with experimental evidence based on CO-diffuse reflectance infrared Fourier-transform spectroscopy, H₂ temperature-programmed reduction, X-ray photoelectron spectroscopy, and calorimetry. Moreover, this Review comprehensively describes the role of acidic and basic support for the metal on the yield of FUA. Overall, this Review provides an insight into how to design and develop an efficiently robust catalyst for the selective reductive amination of a broad spectrum of carbonyl compounds to corresponding amines.

Synergistic Effects of Earth-Abundant Metal-Metal Oxide Enable Reductive Amination of Carbonyls at 50 °C

Reductive amination of carbonyls to primary amines is of importance to the synthesis of fine chemicals; however, this reaction with heterogeneous catalysts containing earth-abundant metals under mild conditions remains scarce. Here, we show that the nickel catalyst with mixed oxidation states enables such synthesis of primary amines under low temperature (50 °C) and H₂ pressure (0.9 MPa). The catalyst shows activity in both water and toluene. The high activity likely results from the formation of small (ca. 4.6 nm) partially oxidized nickel nanoparticles (NPs) homogeneously anchored onto the silica and their synergistic effect. Detailed characterizations indicate stabilization of NPs through strong metal support interaction via electron donation from the metal to support. We identify that the support endowed with an amphoteric nature shows better performance. This strategy of making small metal-metal oxide NPs will open an avenue toward the rational development of efficient catalysts that would allow for other organic transformations under mild reaction conditions.

Polydopamine assisted transformation of ZnO from nanospheres to nanosheets grown in nanoporous BiVO4 films for improved photocatalytic performance

A BiVO4/ZnO nanosheet heterostructure has been fabricated on stainless steel mesh by a solid-solution drying and calcination method, during which ZnO spheres were converted to nanosheets with the aid of polydopamine.

Stable and reusable Ni-based nanoparticles for general and selective hydrogenation of nitriles to amines

Silica supported ultrasmall Ni-nanoparticles allow for general and selective hydrogenation of all kinds of nitriles to primary amines under mild conditions. By calcination of a template material generated from Ni(ii)nitrate and colloidal silica under air and subsequent reduction in the presence of molecular hydrogen the optimal catalyst is prepared. The prepared supported nanoparticles are stable, can be conveniently used and easily recycled. The applicability of the optimal catalyst material is shown by hydrogenation of >110 diverse aliphatic and aromatic nitriles including functionalized and industrially relevant substrates. Challenging heterocyclic nitriles, specifically cyanopyridines, provided the corresponding primary amines in good to excellent yields. The resulting amines serve as important precursors and intermediates for the preparation of numerous life science products and polymers.

Silica supported ultrasmall Ni-nanoparticles allow for general and selective hydrogenations of all kinds of nitriles to primary amines under mild conditions.

Synergy between homogeneous and heterogeneous catalysis

Catalysis plays a decisive role in the advancement of sustainable processes in chemical, pharmaceutical, and agrochemical industries as well as petrochemical, material, and energy technologies. Notably, more than 80% of...

Primary amine synthesis by hydrogen-involving reactions over heterogeneous cobalt catalysts

Co/SiO2 exhibited high selectivity for primary amines in hydrogenation of nitriles and reductive amination of carbonyl compounds.

The mechanism of direct reductive amination of aldehyde and amine with formic acid catalyzed by boron trifluoride complexes: insights from a DFT study

A volcano diagram of BF3 catalytic species and their activities was proposed for the DRA of aldehyde and amine with formic acid.

Modulated electronic structure of Pd nanoparticles on Mg(OH)2 for selective benzonitrile hydrogenation into benzylamine at a low temperature

Pd nanoparticles with enriched electronic density anchored on Mg(OH)2 realize selective benzonitrile hydrogenation to benzylamine at low temperature in the absence of additives, in an atom-economical and green approach for synthesis of highly value-added primary amines.

Cobalt nanoparticles supported on microporous nitrogen-doped carbon for efficient catalytic transfer hydrogenation reaction between nitroarenes and N-heterocycles

Catalytic transfer hydrogenation reaction between nitroarenes and saturated N-heterocycles to simultaneously synthesize value-added anilines and unsaturated N-heterocycles is attractive due to its low-cost, atomic economic, and environmental-friendly properties. Herein, we...

Nanoparticles and single atoms of cobalt synergistically enabled low-temperature reductive amination of carbonyl compounds

Low-temperature and selective reductive amination of carbonyl compounds is a highly promising approach to access primary amines. However, it remains a great challenge to conduct this attractive route efficiently over earth-abundant metal-based catalysts. Herein, we designed several Co-based catalysts (denoted as Co@C–N(x), where x represents the pyrolysis temperature) by the pyrolysis of the metal–organic framework ZIF-67 at different temperatures. Very interestingly, the prepared Co@C–N(800) could efficiently catalyze the reductive amination of various aldehydes/ketones to synthesize the corresponding primary amines with high yields at 35 °C. Besides non-noble metal and mild temperature, the other unique advantage of the catalyst was that the substrates with different reduction-sensitive groups could be converted into primary amines selectively because the Co-based catalyst was not active for these groups at low temperature. Systematic analysis revealed that the catalyst was composed of graphene encapsulated Co nanoparticles and atomically dispersed Co–N_x sites. The Co particles promoted the hydrogenation step, while the Co–N_x sites acted as acidic sites to activate the intermediate (Schiff base). The synergistic effect of metallic Co particles and Co–N_x sites is crucial for the excellent performance of the catalyst Co@C–N(800). To the best of our knowledge, this is the first study on efficient synthesis of primary amines via reductive amination of carbonyl compounds over earth-abundant metal-based catalysts at low temperature (35 °C).

An earth-abundant Co-based catalyst, Co@C–N(800), could efficiently catalyze the reductive amination of carbonyl compounds into primary amines at 35 °C owing to the synergistic effect of Co nanoparticles and atomically dispersed Co–N_x sites.

Electronic Ni–N interaction enhanced reductive amination on an N-doped porous carbon supported Ni catalyst

Reductive amination on Ni/N-doped porous carbon catalyst was enhanced by the formation of Ni–Nx sites and the electronic interaction of N and Ni species, which promoted the reductive amination of CO bonds and reduced the activation energy.

Silica-supported Fe/Fe–O nanoparticles for the catalytic hydrogenation of nitriles to amines in the presence of aluminium additives

The hydrogenation of nitriles to amines represents an important and frequently used industrial process due to the broad applicability of the resulting products in chemistry and life sciences. Despite the existing portfolio of catalysts reported for the hydrogenation of nitriles, the development of iron-based heterogeneous catalysts for this process is still a challenge. Here, we show that the impregnation and pyrolysis of iron(II) acetate on commercial silica produces a reusable Fe/Fe–O@SiO2 catalyst with a well-defined structure comprising the fayalite phase at the Si–Fe interface and α-Fe nanoparticles, covered by an ultrathin amorphous iron(III) oxide layer, growing from the silica matrix. These Fe/Fe–O core–shell nanoparticles, in the presence of catalytic amounts of aluminium additives, promote the hydrogenation of all kinds of nitriles, including structurally challenging and functionally diverse aromatic, heterocyclic, aliphatic and fatty nitriles, to produce primary amines under scalable and industrially viable conditions.

Reusable Co-nanoparticles for general and selective N-alkylation of amines and ammonia with alcohols

A general cobalt-catalyzed N-alkylation of amines with alcohols by borrowing hydrogen methodology to prepare different kinds of amines is reported. The optimal catalyst for this transformation is prepared by pyrolysis of a specific templated material, which is generated in situ by mixing cobalt salts, nitrogen ligands and colloidal silica, and subsequent removal of silica. Applying this novel Co-nanoparticle-based material, >100 primary, secondary, and tertiary amines including N-methylamines and selected drug molecules were conveniently prepared starting from inexpensive and easily accessible alcohols and amines or ammonia.