Analysis of the limitations in the oxygen reduction activity of transition metal oxide surfaces

Janus structural TaON/Graphene-like carbon dual-supported Pt electrocatalyst enables efficient oxygen reduction reaction

Developing carbon-supported Pt-based electrocatalysts with high activity and long-durability for the oxygen reduction reaction (ORR) is an enormous challenge for their commercial applications due to the corrosion of carbon supports in acid/alkaline solution at high potential. In this work, a Janus structural TaON/graphene-like carbon (GLC) was synthesized via an in-situ molecular selfassembly strategy, which was used as a dual-carrier for platinum (Pt). The as-obtained Pt/TaON/GLC presents high half-wave potential (0.94 V vs. RHE), excellent mass (1.48 A mgPt-1) and specific (1.75 mA cmPt-2) activities at 0.9 V, and superior long-term durability with a minimal loss (8.0 %) of mass activity after 10,000 cycles in alkaline solution, outperforming those of Pt/C and other catalysts. The structural characterizations and density functional theory (DFT) calculations indicate that the Pt/TaON/GLC catalyst exhibits the maximum synergies, including enhanced interfacial electron density, improved charge transfer, enhanced O2 adsorption, andsuperimposed OO cleavage. This work shows a potential strategy for preparing the high-active and long-durable Pt-based electrocatalyst by synergism-promoted interface engineering.

Selective oxygen reduction reaction: mechanism understanding, catalyst design and practical application

The oxygen reduction reaction (ORR) is a key component for many clean energy technologies and other industrial processes. However, the low selectivity and the sluggish reaction kinetics of ORR catalysts have hampered the energy conversion efficiency and real application of these new technologies mentioned before. Recently, tremendous efforts have been made in mechanism understanding, electrocatalyst development and system design. Here, a comprehensive and critical review is provided to present the recent advances in the field of the electrocatalytic ORR. The two-electron and four-electron transfer catalytic mechanisms and key evaluation parameters of the ORR are discussed first. Then, the up-to-date synthetic strategies and in situ characterization techniques for ORR electrocatalysts are systematically summarized. Lastly, a brief overview of various renewable energy conversion devices and systems involving the ORR, including fuel cells, metal-air batteries, production of hydrogen peroxide and other chemical synthesis processes, along with some challenges and opportunities, is presented.

Advancing electrocatalytic reactions through mapping key intermediates to active sites via descriptors

Descriptors play a crucial role in electrocatalysis as they can provide valuable insights into the electrochemical performance of energy conversion and storage processes. They allow for the understanding of different catalytic activities and enable the prediction of better catalysts without relying on the time-consuming trial-and-error approaches. Hence, this comprehensive review focuses on highlighting the significant advancements in commonly used descriptors for critical electrocatalytic reactions. First, the fundamental reaction processes and key intermediates involved in several electrocatalytic reactions are summarized. Subsequently, three types of descriptors are classified and introduced based on different reactions and catalysts. These include d-band center descriptors, readily accessible intrinsic property descriptors, and spin-related descriptors, all of which contribute to a profound understanding of catalytic behavior. Furthermore, multi-type descriptors that collectively determine the catalytic performance are also summarized. Finally, we discuss the future of descriptors, envisioning their potential to integrate multiple factors, broaden application scopes, and synergize with artificial intelligence for more efficient catalyst design and discovery.

Electrocatalytic Nitrate Reduction on Metallic CoNi-Terminated Catalyst with Industrial-Level Current Density in Neutral Medium

Green ammonia synthesis through electrocatalytic nitrate reduction reaction (eNO3RR) can serve as an effective alternative to the traditional energy-intensive Haber-Bosch process. However, achieving high Faradaic efficiency (FE) at industrially relevant current density in neutral medium poses significant challenges in eNO3RR. Herein, with the guidance of theoretical calculation, a metallic CoNi-terminated catalyst is successfully designed and constructed on copper foam, which achieves an ammonia FE of up to 100% under industrial-level current density and very low overpotential (-0.15 V versus reversible hydrogen electrode) in a neutral medium. Multiple characterization results have confirmed that the maintained metal atom-terminated surface through interaction with copper atoms plays a crucial role in reducing overpotential and achieving high current density. By constructing a homemade gas stripping and absorption device, the complete conversion process for high-purity ammonium nitrate products is demonstrated, displaying the potential for practical application. This work suggests a sustainable and promising process toward directly converting nitrate-containing pollutant solutions into practical nitrogen fertilizers.

Electrifying oxidation of ethylene and propylene

Ethylene and propylene, as essential precursors in the chemical industry, have been playing a pivotal role in the production of various value-added chemicals that find wide applications in diverse sectors, such as polymer synthesis, lithium-ion battery electrolytes, antifreeze agents and pharmaceuticals. Nevertheless, traditional methods for olefin functionalization including chlorohydrination and epoxidation involve energy-intensive steps and environment-detrimental by-products. In contrast, electrocatalysis is emerging as a promising and sustainable approach for olefin oxidation via utilizing renewable electricity. Recent advancements in energy storage and conversion technologies have intensified the research efforts toward designing efficient electrocatalysts for the selective oxidation of ethylene and propylene, highlighting the shift towards more sustainable production methods. Herein, we summarize recent progress in the electrocatalytic oxidation of ethylene and propylene, focusing on achievement in catalyst design, reaction system selection and mechanism exploration. We figure out the advantages of different oxidation methods for improved performance and discuss the various types of catalysts like noble metals, non-noble metals, metal oxides and carbon-based materials, in facilitating the electrochemical oxidation of ethylene and propylene. Finally, we also provide an overview of current challenges and problems requiring further works.

Biphase Pd Nanosheets with Atomic-Hybrid RhOx/Pd Amorphous Skins Disentangle the Activity-Stability Trade-Off in Oxygen Reduction Reaction

The activity-stability trade-off relationship of oxygen reduction reaction (ORR) is a tricky issue that strikes the electrocatalyst population and hinders the widespread application of fuel cells. Here neoteric biphase Pd nanosheets that are structured with ultrathin two-dimensional crystalline Pd inner cores and ≈1 nm thin atomic-hybrid RhOx/Pd amorphous skins, named c/a-Pd@PdRh NSs, for disentangling this trade-off dilemma for alkaline ORR are developed. The superthin amorphous skins significantly amplify the quantity of flexibly low-coordinated atoms for electrocatalysis. An in situ selected oxidation of the top-surface Rh dopants creates atomically hybrid RhOx/Pd disorder surfaces. Detailed energy spectra and theoretical simulation confirm that these RhOx/Pd interfaces can arouse a surface charge redistribution, causing significant electron deficiency and lowered d-band center for surface Pd. Meanwhile, anticorrosive Rh/RhOx species can thermodynamically passivate the neighboring Pd atoms from oxidative dissolution. Thanks to these amplified interfacial effects, the biphase c/a-Pd@PdRh NSs simultaneously exhibit a superhigh ORR activity (5.92 A mg-1, 22.8 times that of Pt/C) and an outstanding long-lasting stability after 100k cycles of accelerated durability test, showcasing unprecedented electrocatalysts for breaking the activity-stability trade-off relationship of ORR. This work paves a bran-new strategy for designing high-performance electrocatalysts through creating modulated amorphous skins on low-dimensional nanomaterials.

Regulating Surface Dipole Moments of TiO2 for the pH-Universal Cathodic Fenton-Like Process

Although electro-Fenton (EF) processes can avoid the safety risks raised by concentrated hydrogen peroxide (H2O2), the Fe(III) reduction has always been either unstable or inefficient at high pH, resulting in catalyst deactivation and low selectivity of H2O2 activation for producing hydroxyl radicals (•OH). Herein, we provided a strategy to regulate the surface dipole moment of TiO2 by Fe anchoring (TiO2-Fe), which, in turn, substantially increased the H2O2 activation for •OH production. The TiO2-Fe catalyst could work at pH 4-10 and maintained considerable degradation efficiency for 10 cycles. Spectroscopic analysis and a theoretical study showed that the less polar Fe-O bond on TiO2-Fe could finely tune the polarity of H2O2 to alter its empty orbital distribution, contributing to better ciprofloxacin degradation activity within a broad pH range. We further verified the critical role of the weakened polarity of H2O2 on its homolysis into •OH by theoretically and experimentally investigating Cu-, Co-, Ni-, Mn-, and Mo-anchored TiO2. This concept offers an avenue for elaborate design of green, robust, and pH-universal cathodic Fenton-like catalysts and beyond.

Precisely Engineering Asymmetric Atomic CoN4 by Electron Donating and Extracting for Oxygen Reduction Reaction

The development of nonpyrolytic catalysts featuring precisely defined active sites represents an effective strategy for investigating the fundamental relationship between the catalytic activity of oxygen reduction reaction (ORR) catalysts and their local coordination environments. In this study, we have synthesized a series of model electrocatalysts with well-defined CoN4 centers and nonplanar symmetric coordination structures. These catalysts were prepared by a sequential process involving the chelation of cobalt salts and 1,10-phenanthroline-based ligands with various substituent groups (phen(X), where X=OH, CH3, H, Br, Cl) onto covalent triazine frameworks (CTFs). By modulating the electron-donating or electron-withdrawing properties of the substituent groups on the phen-based ligands, the electron density surrounding the CoN4 centers was effectively controlled. Our results demonstrated a direct correlation between the catalytic activity of the CoN4 centers and the electron-donating ability of the substituent group on the phenanthroline ligands. Notably, the catalyst denoted as BCTF-Co-phen(OH), featuring the electron-donating OH group, exhibited the highest ORR catalytic activity. This custom-crafted catalyst achieved a remarkable half-wave potential of up to 0.80 V vs. RHE and an impressive turnover frequency (TOF) value of 47.4×10-3 Hz at 0.80 V vs. RHE in an alkaline environment.

Rational Design of Cost-Effective Metal-Doped ZrO2 for Oxygen Evolution Reaction

The design of cost-effective electrocatalysts is an open challenging for oxygen evolution reaction (OER) due to the "stable-or-active" dilemma. Zirconium dioxide (ZrO2), a versatile and low-cost material that can be stable under OER operating conditions, exhibits inherently poor OER activity from experimental observations. Herein, we doped a series of metal elements to regulate the ZrO2 catalytic activity in OER via spin-polarized density functional theory calculations with van der Waals interactions. Microkinetic modeling as a function of the OER activity descriptor (GO*-GHO*) displays that 16 metal dopants enable to enhance OER activities over a thermodynamically stable ZrO2 surface, among which Fe and Rh (in the form of single-atom dopant) reach the volcano peak (i.e. the optimal activity of OER under the potential of interest), indicating excellent OER performance. Free energy diagram calculations, density of states, and ab initio molecular dynamics simulations further showed that Fe and Rh are the effective dopants for ZrO2, leading to low OER overpotential, high conductivity, and good stability. Considering cost-effectiveness, single-atom Fe doped ZrO2 emerged as the most promising catalyst for OER. This finding offers a valuable perspective and reference for experimental researchers to design cost-effective catalysts for the industrial-scale OER production.

Asymmetric response of transition metal cationic orbitals to applied electric field

Understanding the quantum mechanical mechanisms underlying atomic/ionic interfacial processes and phenomena, particularly their dependence on the electronic orbital rearrangement of atoms/ions in an external electric field, remains a significant challenge. This study investigated the asymmetric response of transition metal (TM) cationic orbitals when subjected to an applied electric field. Quantum mechanical calculations were employed to quantify the newly formed hybrid orbitals and evaluate the corresponding orbital energies of the TM cations. Analysis of the quantitative contribution of asymmetric orbital hybridization to TM-surface interactions showed a significant change in orbital energy and increased effective charges of TM cations at the charged surface. This asymmetric response, induced by a negative external electric field generated from the structural charges of clay minerals (e.g., montmorillonite), repels electrons from the outer-shell orbital. This repulsion consequently increases the electron binding energy of the inner-shell orbitals, leading to new surface reactions, polarization-enhanced induction force, and polarization-induced covalent bonding between the TM cations and the charged surface. Our theoretical predictions regarding TM-clay mineral interactions are consistent with the experimental observations of TM cation adsorption. This finding has significant implications for the adsorptive removal of TM cations from wastewaters and for enhancing the catalytic efficiency of TM-surface catalysts. The unique physical and chemical characteristics exhibited by TMs at charged particle surfaces, resulting from their asymmetric response, can play pivotal roles in environmental and chemical engineering.

Cation Effects on the Acidic Oxygen Reduction Reaction at Carbon Surfaces

Hydrogen peroxide (H2O2) is a widely used green oxidant. Until now, research has focused on the development of efficient catalysts for the two-electron oxygen reduction reaction (2e- ORR). However, electrolyte effects on the 2e- ORR have remained little understood. We report a significant effect of alkali metal cations (AMCs) on carbons in acidic environments. The presence of AMCs at a glassy carbon electrode shifts the half wave potential from -0.48 to -0.22 VRHE. This cation-induced enhancement effect exhibits a uniquely sensitive on/off switching behavior depending on the voltammetric protocol. Voltammetric and in situ X-ray photoemission spectroscopic evidence is presented, supporting a controlling role of the potential of zero charge of the catalytic enhancement. Density functional theory calculations associate the enhancement with stabilization of the *OOH key intermediate as a result of locally induced field effects from the AMCs. Finally, we developed a refined reaction mechanism for the H2O2 production in the presence of AMCs.

Reversible Hydrogen Electrode (RHE) Scale Dependent Surface Pourbaix Diagram at Different pH

In the analysis of electrocatalysis mechanisms and the design of catalysts, the effect of electrochemistry-induced surface coverage is a critical consideration that should not be overlooked. The surface Pourbaix diagram emerges as a fundamental tool in this context, providing essential insights into the surface coverage of adsorbates generated via electrochemical potential-driven water activation. A classic surface Pourbaix diagram considers the pH effects by correcting the free energy of H+ ions by the concentration-dependent term: -kBT ln(10) × pH, which is independent of the reversible hydrogen electrode (RHE) scale. However, this is sometimes inconsistent with the experimentally observed potential-dependent surface coverage at an RHE scale, especially under high-pH conditions. Here, we derived the pH-dependent surface Pourbaix diagram at an RHE scale by considering the energetics computed by density functional theory with the Bayesian Error Estimation Functional with van der Waals corrections (BEEF-vdW), the electric field effects, the derived adsorption-induced dipole moment and polarizability, and the potential of zero-charge. Using Pt(111) as the typical example, we found that the surface coverage predicted by the proposed RHE-dependent surface Pourbaix diagram can significantly minimize the discrepancy between theory and experimental observations, especially under neutral-alkaline, moderate-potential conditions. This work provides a new methodology and establishes guidelines for the precise analysis of the surface coverage prior to the evaluation of the activity of an electrocatalyst.

Benchmarking pH-field coupled microkinetic modeling against oxygen reduction in large-scale Fe-azaphthalocyanine catalysts

Molecular metal-nitrogen-carbon (M-N-C) catalysts with well-defined structures and metal-coordination environments exhibit distinct structural properties and excellent electrocatalytic performance, notably in the oxygen reduction reaction (ORR) for fuel cells. Metal-doped azaphthalocyanine (AzPc) catalysts, a variant of molecular M-N-Cs, can be structured with unique long stretching functional groups, which make them have a geometry far from a two-dimensional geometry when loaded onto a carbon substrate, similar to a "dancer" on a stage, and this significantly affects their ORR efficiency at different pH levels. However, linking structural properties to performance is challenging, requiring comprehensive microkinetic modeling, substantial computational resources, and a combination of theoretical and experimental validation. Herein, we conducted pH-dependent microkinetic modeling based upon ab initio calculations and electric field-pH coupled simulations to analyze the pH-dependent ORR performance of carbon-supported Fe-AzPcs with varying surrounding functional groups. In particular, this study incorporates large molecular structures with complex long-chain "dancing patterns", each featuring >650 atoms, to analyze their performance in the ORR. Comparison with experimental ORR data shows that pH-field coupled microkinetic modeling closely matches the observed ORR efficiency at various pH levels in Fe-AzPc catalysts. Our results also indicate that assessing charge transfer at the Fe-site, where the Fe atom typically loses around 1.3 electrons, could be a practical approach for screening appropriate surrounding functional groups for the ORR. This study provides a direct benchmarking analysis for the microkinetic model to identify effective M-N-C catalysts for the ORR under various pH conditions.

Hydrogen peroxide electrogeneration from O2 electroreduction: A review focusing on carbon electrocatalysts and environmental applications

Hydrogen peroxide (H2O2) stands as one of the foremost utilized oxidizing agents in modern times. The established method for its production involves the intricate and costly anthraquinone process. However, a promising alternative pathway is the electrochemical hydrogen peroxide production, accomplished through the oxygen reduction reaction via a 2-electron pathway. This method not only simplifies the production process but also upholds environmental sustainability, especially when compared to the conventional anthraquinone method. In this review paper, recent works from the literature focusing on the 2-electron oxygen reduction reaction promoted by carbon electrocatalysts are summarized. The practical applications of these materials in the treatment of effluents contaminated with different pollutants (drugs, dyes, pesticides, and herbicides) are presented. Water treatment aiming to address these issues can be achieved through advanced oxidation electrochemical processes such as electro-Fenton, solar-electro-Fenton, and photo-electro-Fenton. These processes are discussed in detail in this work and the possible radicals that degrade the pollutants in each case are highlighted. The review broadens its scope to encompass contemporary computational simulations focused on the 2-electron oxygen reduction reaction, employing different models to describe carbon-based electrocatalysts. Finally, perspectives and future challenges in the area of carbon-based electrocatalysts for H2O2 electrogeneration are discussed. This review paper presents a forward-oriented viewpoint of present innovations and pragmatic implementations, delineating forthcoming challenges and prospects of this ever-evolving field.

Unraveling the pH-Dependent Oxygen Reduction Performance on Single-Atom Catalysts: From Single- to Dual-Sabatier Optima

Metal-nitrogen-carbon (M-N-C) single-atom catalysts (SACs) have emerged as a potential substitute for the costly platinum-group catalysts in oxygen reduction reaction (ORR). However, several critical aspects of M-N-C SACs in ORR remain poorly understood, including their pH-dependent activity, selectivity for 2- or 4-electron transfer pathways, and the identification of the rate-determining steps. Herein, by analyzing >100 M-N-C structures and >2000 sets of energetics, we unveil a pH-dependent evolution in ORR activity volcanos─from a single peak in alkaline media to a double peak in acids. We found that this pH-dependent behavior in M-N-C catalysts fundamentally stems from their moderate dipole moments and polarizability for O* and HOO* adsorbates, as well as unique scaling relations among ORR adsorbates. To validate our theoretical discovery, we synthesized a series of molecular M-N-C catalysts, each characterized by well-defined atomic coordination environments. Impressively, the experiments matched our theoretical predictions on kinetic current, Tafel slope, and turnover frequency in both acidic and alkaline environments. These new insights also refine the famous Sabatier principle by emphasizing the need to avoid an "acid trap" while designing M-N-C catalysts for ORR or any other pH-dependent electrochemical applications.

Identifying Stable Electrocatalysts Initialized by Data Mining: Sb2 WO6 for Oxygen Reduction

Data mining from computational materials database has become a popular strategy to identify unexplored catalysts. Herein, the opportunities and challenges of this strategy are analyzed by investigating a discrepancy between data mining and experiments in identifying low-cost metal oxide (MO) electrocatalysts. Based on a search engine capable of identifying stable MOs at the pH and potentials of interest, a series of MO electrocatalysts is identified as potential candidates for various reactions. Sb2 WO6 attracted the attention among the identified stable MOs in acid. Based on the aqueous stability diagram, Sb2 WO6 is stable under oxygen reduction reaction (ORR) in acidic media but rather unstable under high-pH ORR conditions. However, this contradicts to the subsequent experimental observation in alkaline ORR conditions. Based on the post-catalysis characterizations, surface state analysis, and an advanced pH-field coupled microkinetic modeling, it is found that the Sb2 WO6 surface will undergo electrochemical passivation under ORR potentials and form a stable and 4e-ORR active surface. The results presented here suggest that though data mining is promising for exploring electrocatalysts, a refined strategy needs to be further developed by considering the electrochemistry-induced surface stability and activity.

Cation-Deficient Perovskites Greatly Enhance the Electrocatalytic Activity for Oxygen Reduction Reaction

Many perovskite oxides (ABO3 ) are considered the most promising alternatives to noble metal catalysts for oxygen reduction reaction (ORR) due to their high intrinsic activities. However, their electrocatalytic performance is often limited by poor electrical conductivity and low specific surface area. Here an electrochemically induced calcium-leaching process is reported to greatly increase the electrochemical surface area (ECSA) of La0.6 Ca0.4 MnO3 (LCMO64). The ECSA of the activated, Ca-deficient LCMO64 is ≈33.84% higher than that of the unactivated materials, demonstrating superior electrocatalytic ORR performance to the benchmark commercial Pt/C catalyst in an alkaline solution. Theoretical analysis coupled with electrochemical surface state probing and pH-dependent microkinetic modeling suggests that this catalyst with the identified most favorable state under ORR operating conditions reaches the Sabatier optimum of alkaline ORR. This reconstructed LCMO64 is among the best-performing ORR catalysts ever reported, providing new insights into the design of advanced perovskite materials with optimal surface chemistry.

Iron oxide-promoted photochemical oxygen reduction to hydrogen peroxide (H2O2)

Hydrogen peroxide (H2O2) is a valuable green oxidant with a wide range of applications. Furthermore, it is recognized as a possible future energy carrier achieving safe operation, storage and transportation. The photochemical production of H2O2 serves as a promising alternative to the waste- and energy-intensive anthraquinone process. Following the 12 principles of Green Chemistry, we demonstrate a facile and general approach to sustainable catalyst development utilizing earth-abundant iron and biobased sources only. We developed several iron oxide (FeOx) nanoparticles (NPs) for successful photochemical oxygen reduction to H2O2 under visible light illumination (445 nm). Achieving a selectivity for H2O2 of >99%, the catalyst material could be recycled for up to four consecutive rounds. An apparent quantum yield (AQY) of 0.11% was achieved for the photochemical oxygen reduction to H2O2 with visible light (445 nm) at ambient temperatures and pressures (9.4-14.8 mmol g-1 L-1). Reaching productivities of H2O2 of at least 1.7 ± 0.3 mmol g-1 L-1 h-1, production of H2O2 was further possible via sunlight irradiation and in seawater. Finally, a detailed mechanism has been proposed on the basis of experimental investigation of the catalyst's properties and computational results.

Well-defined N3 C1 -anchored Single-Metal-Sites for Oxygen Reduction Reaction

N-, C-, O-, S-coordinated single-metal-sites (SMSs) have garnered significant attention due to the potential for significantly enhanced catalytic capabilities resulting from charge redistribution. However, significant challenges persist in the precise design of well-defined such SMSs, and the fundamental comprehension has long been impeded in case-by-case reports using carbon materials as investigation targets. In this work, the well-defined molecular catalysts with N3 C1 -anchored SMSs, i.e., N-confused metalloporphyrins (NCPor-Ms), are calculated for their catalytic oxygen reduction activity. Then, NCPor-Ms with corresponding N4 -anchored SMSs (metalloporphyrins, Por-Ms), are synthesized for catalytic activity evaluation. Among all, NCPor-Co reaches the top in established volcano plots. NCPor-Co also shows the highest half-wave potential of 0.83 V vs. RHE, which is much better than that of Por-Co (0.77 V vs. RHE). Electron-rich, low band gap and regulated d-band center contribute to the high activity of NCPor-Co. This study delves into the examination of well-defined asymmetric SMS molecular catalysts, encompassing both theoretical and experimental facets. It serves as a pioneering step towards enhancing the fundamental comprehension and facilitating the development of high-performance asymmetric SMS catalysts.

Importing Antibonding-Orbital Occupancy through Pd-O-Gd Bridge Promotes Electrocatalytic Oxygen Reduction

The active-site density, intrinsic activity, and durability of Pd-based materials for oxygen reduction reaction (ORR) are critical to their application in industrial energy devices. This work constructs a series of carbon-based rare-earth (RE) oxides (Gd2 O3 , Sm2 O3 , Eu2 O3 , and CeO2 ) by using RE metal-organic frameworks to tune the ORR performance of the Pd sites through the Pd-REx Oy interface interaction. Taking Pd-Gd2 O3 /C as a representative, it is identified that the strong coupling between Pd and Gd2 O3 induces the formation of the Pd-O-Gd bridge, which triggers charge redistribution of Pd and Gd2 O3 . The screened Pd-Gd2 O3 /C exhibits impressive ORR performance with high onset potential (0.986 VRHE ), half-wave potential (0.877 VRHE ), and excellent stability. Similar ORR results are also found for Pd-Sm2 O3 /C, Pd-Eu2 O3 /C, and Pd-CeO2 /C catalysts. Theoretical analyses reveal that the coupling between Pd and Gd2 O3 promotes electron transfer through the Pd-O-Gd bridge, which induces the antibonding-orbital occupancy of Pd-*OH for the optimization of *OH adsorption in the rate-determining step of ORR. The pH-dependent microkinetic modeling shows that Pd-Gd2 O3 is close to the theoretical optimal activity for ORR, outperforming Pt under the same conditions. By its ascendancy in ORR, the Pd-Gd2 O3 /C exhibits superior performance in Zn-air battery as an air cathode, implying its excellent practicability.

Symmetry-Induced Regulation of Pt Strain Derived from Pt3 Ga Intermetallic for Boosting Oxygen Reduction Reaction

Pt-based fuel cell catalysts with excellent activity and stability for proton-exchange membrane fuel cells (PEMFCs) have been developed through strain regulation in recent years. Herein, this work demonstrates that symmetry-induced strain regulation of Pt surface of PtGa intermetallic compounds can greatly enhance the catalytic performance of the oxygen reduction reaction (ORR). With the strain environment varies derived from the lattice mismatch of analogous PtGa core but different symmetry, the Pt surface of the PtGa alloy and the Pt3 Ga (Pm3 ¯ $\bar{3}$ m) precisely realize 0.58% and 2.7% compressive strain compared to the Pt3 Ga (P4/mmm). Experimental and theoretical results reveal that when the compressive stress of the Pt lattice increases, the desorption process of O* intermediates becomes accelerated, which is conducive to oxygen reduction. The Pt3 Ga (Pm3 ¯ $\bar{3}$ m) with high symmetry and compressive Pt surface exhibit the highest mass and specific activities of 2.18 A mgPt -1 and 5.36 mA cm-2 , respectively, which are more than one order of magnitude higher than those of commercial Pt/C catalysts. This work demonstrates that material symmetry can be used to precisely modulate Pt surface stress to enhance the ORR, as well as provide a distinct platform to investigate the relationship between Pt compressibility and catalytic activity.

Activity And Stability of Single- And Di-Atom Catalysts for the O2 Reduction Reaction

Efficient and inexpensive catalysts for the O2 reduction reaction (ORR) are needed for the advancement of renewable energy technologies. In this study, we designed a computational catalyst-screening method to identify single and di-atom metal dopants from first-row transition elements supported on defect-containing nitrogenated graphene surfaces for the ORR. Based on formation-energy calculations and micro-kinetic modelling of reaction pathways using intermediate binding free energies, we have identified four potentially interesting single-atom catalysts (SACs) and fifteen di-atom catalysts (DACs) with relatively high estimated catalytic activity at 0.8 V vs RHE. Among the best SACs, MnNC shows high stability in both acidic and alkaline media according to our model. For the DACs, we found four possible candidates, MnMn, FeFe, CoCo, and MnNi doped on quad-atom vacancy sites having considerable stability over a wide pH range. The remaining SACs and DACs with high activity are either less stable or show a stability region at an alkaline pH.

Continuous electroproduction of formate via CO2 reduction on local symmetry-broken single-atom catalysts

Atomic-level coordination engineering is an efficient strategy for tuning the catalytic performance of single-atom catalysts (SACs). However, their rational design has so far been plagued by the lack of a universal correlation between the coordination symmetry and catalytic properties. Herein, we synthesised planar-symmetry-broken CuN3 (PSB-CuN3) SACs through microwave heating for electrocatalytic CO2 reduction. Remarkably, the as-prepared catalysts exhibited a selectivity of 94.3% towards formate at -0.73 V vs. RHE, surpassing the symmetrical CuN4 catalyst (72.4% at -0.93 V vs. RHE). In a flow cell equipped with a PSB-CuN3 electrode, over 90% formate selectivity was maintained at an average current density of 94.4 mA cm-2 during 100 h operation. By combining definitive structural identification with operando X-ray spectroscopy and theoretical calculations, we revealed that the intrinsic local symmetry breaking from planar D4h configuration induces an unconventional dsp hybridisation, and thus a strong correlation between the catalytic activity and microenvironment of metal centre (i.e., coordination number and distortion), with high preference for formate production in CuN3 moiety. The finding opens an avenue for designing efficient SACs with specific local symmetries for selective electrocatalysis.

Ferromagnetic ordering correlated strong metal-oxygen hybridization for superior oxygen reduction reaction activity

The efficiency of transition-metal oxide materials toward oxygen-related electrochemical reactions is classically controlled by metal-oxygen hybridization. Recently, the unique magnetic exchange interactions in transition-metal oxides are proposed to facilitate charge transfer and reduce activation barrier in electrochemical reactions. Such spin/magnetism-related effects offer a new and rich playground to engineer oxide electrocatalysts, but their connection with the classical metal-oxygen hybridization theory remains an open question. Here, using the MnxVyOz family as a platform, we show that ferromagnetic (FM) ordering is intrinsically correlated with the strong manganese (Mn)-oxygen (O) hybridization of Mn oxides, thus significantly increasing the oxygen reduction reaction (ORR) activity. We demonstrate that this enhanced Mn-O hybridization in FM Mn oxides is closely associated with the generation of active Mn sites on the oxide surface and obtaining favorable reaction thermodynamics under operating conditions. As a result, FM-Mn2V2O7 with a high degree of Mn-O hybridization achieves a record high ORR activity. Our work highlights the potential applications of magnetic oxide materials with strong metal-oxygen hybridization in energy devices.

Reconfigurable Manipulation of Oxygen Content on Metal Oxide Surfaces and Applications to Gas Sensing

Oxygen vacancies and adsorbed oxygen species on metal oxide surfaces play important roles in various fields. However, existing methods for manipulating surface oxygen require severe settings and are ineffective for repetitive manipulation. We present a method to manipulate the amount of surface oxygen by modifying the oxygen adsorption energy by electrically controlling the electron concentration of the metal oxide. The surface oxygen control ability of the method is verified using first-principles calculations based on density functional theory (DFT), X-ray photoelectron spectroscopy (XPS), and electrical resistance analysis. The presented method is implemented by fabricating oxide thin film transistors with embedded microheaters. The method can reconfigure the oxygen vacancies on the In2O3, SnO2, and IGZO surfaces so that specific chemisorption dominates. The method can selectively increase oxidizing (e.g., NO and NO) and reducing gas (e.g., H2S, NH3, and CO) reactions by electrically controlling the metal oxide surface to be oxygen vacancy-rich or adsorbed oxygen species-rich. The proposed method is applied to gas sensors and overcomes their existing limitations. The method makes the sensor insensitive to one gas (e.g., H2S) in mixed-gas environments (e.g., NO2+H2S) and provides a linear response (R2 = 0.998) to the target gas (e.g., NO2) concentration within 3 s. We believe that the proposed method is applicable to applications utilizing metal oxide surfaces.

Effects of intermetal distance on the electrochemistry-induced surface coverage of M-N-C dual-atom catalysts

The often-overlooked electrocatalytic bridge-site poisoning of the emerging dual-atom catalysts (DACs) has aroused broad concerns very recently. Herein, based on surface Pourbaix analysis, we identified a significant change in the electrochemistry-induced surface coverages of DACs upon changing the intermetal distance. We found a pronounced effect of the intermetal distance on the electrochemical potential window and the type of pre-covered adsorbate, suggesting an interesting avenue to tune the electrocatalytic function of DACs.

Titanium Oxide Electrocatalytic Membrane Filtration: "Two Faces" of Oxygen Vacancies in Generation and Transformation of Reactive Oxygen Species

Oxygen vacancies are crucial to the production of reactive oxygen species (ROS) in the metal oxide electrocatalytic membrane (MOx EM) process. Here, using cathodic TiOx EM as a model, we thoroughly reveal the roles of oxygen vacancies in ROS generation and transformation. Oxygen vacancies significantly promote H2O2 and •OH production at low concentrations (increment <35%) but inhibit their production at high concentrations (increment >35%). Electrochemical analysis discloses that the enhancement of ROS production profits from the acceleration of charge transfer kinetics by both bulk and surface oxygen vacancies, whereas we attribute the decline in ROS production to the strong adsorption of ROS by surface oxygen vacancies. It is strongly supported by theoretical calculations that reveal the promoted adsorption of *OOH and *OH by oxygen vacancies, which intensifies the capture and scavenging of H2O2 and •OH. Moreover, the gradual increase of interaction time between ROS and oxygen vacancies (from ∼1 to ∼5 s) notably reduces the generation and transformation efficiency of ROS, further highlighting the detrimental impact of oxygen vacancies. In summary, oxygen vacancies show "two faces" toward ROS generation and transformation, acting as ROS promoters at low concentrations but inhibitors at high concentrations. A medium oxygen vacancy concentration is preferred for ROS production, thus causing impressive pollutant removal (>95% removal of bisphenol A within 1.2-1.5 s at 360-440 LMH). This study provides guidance on regulating ROS generation and transformation by manipulating the oxygen vacancy concentration to enhance the decontamination efficiency of MOx EMs.

Origin of the superior oxygen reduction activity of zirconium nitride in alkaline media

The anion exchange membrane fuel cell (AEMFC), which can operate in alkaline media, paves a promising avenue for the broad application of earth-abundant element based catalysts. Recent pioneering studies found that zirconium nitride (ZrN) with low upfront capital cost can exhibit high activity, even surpassing that of Pt in alkaline oxygen reduction reaction (ORR). However, the origin of its superior ORR activity was not well understood. Herein, we propose a new theoretical framework to uncover the ORR mechanism of ZrN by integrating surface state analysis, electric field effect simulations, and pH-dependent microkinetic modelling. The ZrN surface was found to be covered by ∼1 monolayer (ML) HO* under ORR operating conditions, which can accommodate the adsorbates in a bridge-site configuration for the ORR. Electric field effect simulations demonstrate that O* adsorption on a 1 ML HO* covered surface only induces a consistently small dipole moment change, resulting in a moderate bonding strength that can account for the superior activity. Based on the identified surface state of ZrN and electric field simulations, pH-dependent microkinetic modelling found that ZrN reaches the Sabatier optimum of the kinetic ORR volcano model in alkaline media, with the simulated polarization curves being in excellent agreement with the experimental data of ZrN and Pt/C. Finally, we show that this theoretical framework can lead to a good explanation for the alkaline oxygen electrocatalysis of other transition metal nitrites such as Fe3N, TiN, and HfN. In summary, this study proposes a new framework to rationalize and design transition metal nitrides for alkaline ORR.

Promoting Oxygen Reduction Reaction on Carbon-based Materials by Selective Hydrogen Bonding

Electrochemical oxygen reduction reaction (ORR) is fundamental for many energy conversion and storage devices. Selective tuning of *OOH/*OH adsorption energy to break the intrinsic scaling limitation (ΔG*OOH =ΔG*OH +3.2 eV) is effective in optimizing the ORR limiting potential (UL ), which is practically challenging to achieve by constructing a particular catalyst. Herein, using first-principles calculations, we elucidated how to rationally plant an additional *OH that can selectively interact with the ORR intermediate of *OOH via hydrogen bonding, while not affecting the *OH intermediate. Guided by the design principle, we successfully tailored a series of novel carbon-based catalysts, with merits of low-cost, long-lasting, synthesis feasibility, exhibiting a high UL (1.06 V). Our proposed strategy comes up with a new linear scaling relationship of ΔG*OOH =ΔG*OH +2.84 eV. This approach offers a great possibility for the rational design of efficient catalysts for ORR and other chemical reactions.

Progress and Perspective for In Situ Studies of Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells

Proton exchange membrane fuel cell (PEMFC) is one of the most promising energy conversion devices with high efficiency and zero emission. However, oxygen reduction reaction (ORR) at the cathode is still the dominant limiting factor for the practical development of PEMFC due to its sluggish kinetics and the vulnerability of ORR catalysts under harsh operating conditions. Thus, the development of high-performance ORR catalysts is essential and requires a better understanding of the underlying ORR mechanism and the failure mechanisms of ORR catalysts with in situ characterization techniques. This review starts with the introduction of in situ techniques that have been used in the research of the ORR processes, including the principle of the techniques, the design of the in situ cells, and the application of the techniques. Then the in situ studies of the ORR mechanism as well as the failure mechanisms of ORR catalysts in terms of Pt nanoparticle degradation, Pt oxidation, and poisoning by air contaminants are elaborated. Furthermore, the development of high-performance ORR catalysts with high activity, anti-oxidation ability, and toxic-resistance guided by the aforementioned mechanisms and other in situ studies are outlined. Finally, the prospects and challenges for in situ studies of ORR in the future are proposed.

Carbon-Free, Binder-Free MnO2@Mn Catalyst for Oxygen Reduction Reaction

Reasonable design and feasible preparation of low-cost and stable oxygen reduction reaction (ORR) catalysts with excellent performance play a key role in the development of fuel cells and metal-air batteries. A 3D porous superimposed nanosheet catalyst composed of metal manganese covered with MnO₂ nanofilms (P-NS-MnO₂@Mn) was designed and synthesized by rotating disk electrodes (RDEs) through one-step electrodeposition. The catalyst contains no carbon material. Therefore, the oxidation and corrosion of the carbon material during use can be avoided, resulting in excellent stability. The structural and composition characterizations indicate that the nanosheets with sharp edges exist on the surface of the wall surrounding the macropore (diameter ∼ 5.07 μm) and they connect tightly. Both the nanosheets and the wall of the macropore are composed of metal manganese covered completely with MnO₂ film with a thickness of less than 5 nm. The half-wave potential of the synthesized P-NS-MnO₂@Mn catalyst is 0.86 V. Besides, the catalyst exhibits good stability with almost no decay after a 30 h chronoamperometric test. Finite element analysis (FEA) simulation reveals the high local electric field intensity surrounding the sharp edges of the nanosheets. Density functional theory (DFT) calculations reveal that the novel nanosheet structure composed of MnO₂ nanofilms covered on the surface of the Mn matrix accelerates the electronic transfer of the MnO₂ nanofilms during the ORR process. The high local electric field intensity near the sharp edge of the nanosheets effectively promotes the orbital hybridization and strengthens the adsorbing Mn-O bond between the active site Mn in the nanosheets and the intermediate OOH* during the ORR process. This study provides a new strategy for preparing transition metal oxide catalysts and a novel idea about the key factors affecting the catalytic activity of transition metal oxides for the ORR.

Metal Oxide-Supported Metal Catalysts for Electrocatalytic Oxygen Reduction Reaction: Characterization Methods, Modulation Strategies, and Recent Progress

The sluggish kinetics of the oxygen reduction reaction (ORR) with complex multielectron transfer steps significantly limits the large-scale application of electrochemical energy devices, including metal-air batteries and fuel cells. Recent years witnessed the development of metal oxide-supported metal catalysts (MOSMCs), covering single atoms, clusters, and nanoparticles. As alternatives to conventional carbon-dispersed metal catalysts, MOSMCs are gaining increasing interest due to their unique electronic configuration and potentially high corrosion resistance. By engineering the metal oxide substrate, supported metal, and their interactions, MOSMCs can be facilely modulated. Significant progress has been made in advancing MOSMCs for ORR, and their further development warrants advanced characterization methods to better understand MOSMCs and precise modulation strategies to boost their functionalities. In this regard, a comprehensive review of MOSMCs for ORR is still lacking despite this fast-developing field. To eliminate this gap, advanced characterization methods are introduced for clarifying MOSMCs experimentally and theoretically, discuss critical methods of boosting their intrinsic activities and number of active sites, and systematically overview the status of MOSMCs based on different metal oxide substrates for ORR. By conveying methods, research status, critical challenges, and perspectives, this review will rationally promote the design of MOSMCs for electrochemical energy devices.

Mechanical Interlocking Enhances the Electrocatalytic Oxygen Reduction Activity and Selectivity of Molecular Copper Complexes

Efficient O₂ reduction reaction (ORR) for selective H₂O generation enables advanced fuel cell technology. Nonprecious metal catalysts are viable and attractive alternatives to state-of-the-art Pt-based materials that are expensive. Cu complexes inspired by Cu-containing O₂ reduction enzymes in nature are yet to reach their desired ORR catalytic performance. Here, the concept of mechanical interlocking is introduced to the ligand architecture to enforce dynamic spatial restriction on the Cu coordination site. Interlocked catenane ligands could govern O₂ binding mode, promote electron transfer, and facilitate product elimination. Our results show that ligand interlocking as a catenane steers the ORR selectivity to H₂O as the major product via the 4e^- pathway, rivaling the selectivity of Pt, and boosts the onset potential by 130 mV, the mass activity by 1.8 times, and the turnover frequency by 1.5 fold as compared to the noninterlocked counterpart. Our Cu catenane complex represents one of the first examples to take advantage of mechanical interlocking to afford electrocatalysts with enhanced activity and selectivity. The mechanistic insights gained through this integrated experimental and theoretical study are envisioned to be valuable not just to the area of ORR energy catalysis but also with broad implications on interlocked metal complexes that are of critical importance to the general fields in redox reactions involving proton-coupled electron transfer steps.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Direction regulation of interface carrier transfer and enhanced photocatalytic oxygen activation over Z-scheme Bi4V2O11/Ag/AgCl for water purification

Molecular oxygen activation is essential to the photocatalytic oxidation reaction, which is highly dependent on the construction of active sites and efficient charge transfer of photocatalysts. In this study, we constructed Bi₄V₂O₁₁/Ag/AgCl Z-type heterojunction photocatalysts with significantly enhanced molecular oxygen activation capacity. The systematic characterization and analysis including X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations confirmed that the formation of efficient Z-type heterostructure could be attributed to the introduction of Ag nanoparticles (NPs), which regulated the electron transfer direction from Bi₄V₂O₁₁ to AgCl. Owing to the advantage of enhanced charge transfer efficiency, the O₂^- generation capacity of Bi₄V₂O11/Ag/AgCl Z-scheme heterojunction was as high as 4.6 times that of pure Bi₄V₂O₁₁. Consequently, Bi₄V₂O₁₁/Ag/AgCl showed good degradation performance against tetracycline (TC), ciprofloxacin (CIP), ranitidine hydrochloride (RAN) and 2,4-dichlorophenoxyacetic acid (2,4-D) under visible light, and their degradation rates were 8.2 times, 5.9 times, 3.8 times and 11.9 times higher than those of Bi₄V₂O₁₁, respectively. This study provides an effective and feasible strategy to design photocatalyst with improved molecular oxygen activation efficiency.

Defect engineering of two-dimensional materials for advanced energy conversion and storage

In the global trend towards carbon neutrality, sustainable energy conversion and storage technologies are of vital significance to tackle the energy crisis and climate change. However, traditional electrode materials gradually reach their property limits. Two-dimensional (2D) materials featuring large aspect ratios and tunable surface properties exhibit tremendous potential for improving the performance of energy conversion and storage devices. To rationally control the physical and chemical properties for specific applications, defect engineering of 2D materials has been investigated extensively, and is becoming a versatile strategy to promote the electrode reaction kinetics. Simultaneously, exploring the in-depth mechanisms underlying defect action in electrode reactions is crucial to provide profound insight into structure tailoring and property optimization. In this review, we highlight the cutting-edge advances in defect engineering in 2D materials as well as their considerable effects in energy-related applications. Moreover, the confronting challenges and promising directions are discussed for the development of advanced energy conversion and storage systems.

Insight into oxygen reduction activity and pathway on pure titanium using scanning electrochemical microscopy and theoretical calculations

HYPOTHESIS

Unlike noble metals, the oxygen reduction reaction (ORR) behavior on Ti is more complicated due to its spontaneously formed oxide film. This film results in sluggish ORR kinetics and tends to be reduced within ORR potential region, causing the weak and multi-reaction coupled current. Though Ti is being used in chemical and biological fields, its ORR research is still underexplored.

EXPERIMENTS

We innovatively employed the modified reactive tip generation-substrate collection (RTG/SC) mode of scanning electrochemical microscopy (SECM) with high efficiency of 97.2 % to quantitatively study the effects of film characteristics, solution environment (pH, anion, dissolved oxygen), and applied potential on the ORR activity and selectivity of Ti. Then, density functional theory (DFT) and molecular dynamics (MD) analyses were employed to elucidate its ORR behavior.

FINDINGS

On highly reduced Ti, film properties dominate ORR behavior with promoted 4e^- selectivity. Rapid film regeneration in alkaline/O₂-saturated conditions inhibits ORR activity. Besides, ORR is sensitive to anion species in neutral solutions while showing enhanced 4e^- reduction in alkaline media. All the improved 4e^- selectivities originate from the hydrogen bond/electrostatic stabilization effect, while the decayed ORR activity by Cl^- arises from the suppressed O₂ adsorption. This work provides theoretical support and possible guidance for ORR research on oxide-covered metals.

Improving the Oxygen Evolution Activity of Layered Double-Hydroxide via Erbium-Induced Electronic Engineering

Layered double-hydroxide (LDH) has been considered an important class of electrocatalysts for the oxygen evolution reaction (OER), but the adsorption-desorption behaviors of oxygen intermediates on its surface still remain unsatisfactory. Apart from transition-metal doping to solve this electrocatalytic problem of LDH, rare-earth (RE) species have sprung up as emerging dopants owing to their unique 4f valence-electronic configurations. Herein, the Er is chosen as a RE model to improve OER activity of LDH via constructing nickel foam supported Er-doped NiFe-LDH catalyst (Er-NiFe-LDH@NF). The optimal Er-NiFe-LDH@NF exhibits a low overpotential (191 mV at 10 mA cm^-2 ), high turnover frequency (0.588 s^-1 ), and low activation energy (36.03 kJ mol^-1 ), which are superior to Er-free sample. Electrochemical in situ Raman spectra reveal the facilitated transition of Ni-OH into Ni-OOH for promoted OER kinetics through the Er doping effect. Theoretical calculations demonstrate that the introduction of Er facilitates the spin crossover of valence electrons by optimizing the d band center of NiFe-LDH, which leads to the G_O -G_HO closer to the optimal activity of the kinetic OER volcano by balancing the bonding strength of *O and *OH. Moreover, the Er-NiFe-LDH@NF presents high practicability in electrochemical water-splitting devices with a low driving potential of and a well-extended driving period.

Challenges and Opportunities of Transition Metal Oxides as Electrocatalysts

As a sustainable energy technology, electrocatalytic energy conversion and storage has become increasingly prominent. The oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO2 RR) are the key steps in the industrial applications of energy conversion and storage. Compared to the widely used precious metal catalysts, less-noble transition metal oxides (TMOs) and TMO-like materials have attracted broad attention as electrocatalysts in the above reactions. In this concept, we summarize the challenges and opportunities of some typical TMOs in electrocatalysis, and modification strategies of TMOs as electrocatalysts are discussed.

Steering from electrochemical denitrification to ammonia synthesis

The removal of nitric oxide is an important environmental issue, as well as a necessary prerequisite for achieving high efficiency of CO₂ electroreduction. To this end, the electrocatalytic denitrification is a sustainable route. Herein, we employ reaction phase diagram to analyze the evolution of reaction mechanisms over varying catalysts and study the potential/pH effects over Pd and Cu. We find the low N₂ selectivity compared to N₂O production, consistent with a set of experiments, is limited fundamentally by two factors. The N₂OH* binding is relatively weak over transition metals, resulting in the low rate of as-produced N₂O* protonation. The strong correlation of OH* and O* binding energies limits the route of N₂O* dissociation. Although the experimental conditions of varying potential, pH and NO pressures can tune the selectivity slightly, which are insufficient to promote N₂ selectivity beyond N₂O and NH₃. A possible solution is to design catalysts with exceptions to break the scaling characters of energies. Alternatively, we propose a reverse route with the target of decentralized ammonia synthesis.

Surface states of dual-atom catalysts should be considered for analysis of electrocatalytic activity

Experimentally well-characterized dual-atom catalysts (DACs), where two adjacent metal atoms are stably anchored on carbon defects, have shown some clear advantages in electrocatalysis compared to conventional catalysts and emerging single-atom catalysts. However, most previous theoretical studies directly used a pristine dual-atom site to analyze the electrocatalytic activity of a DAC. Herein, by analyzing 8 homonuclear and 64 heteronuclear DACs structures with ab initio calculations, our derived surface Pourbaix diagrams show that the surface states of DACs generally differ from a pristine surface at electrocatalytic operating conditions. This phenomenon suggests that the surface state of a DAC should be considered before analyzing the catalytic activity in electrocatalysis, while the electrochemistry-driven pre-adsorbed molecules generated from the liquid phase may either change the electronic properties or even block the active site of DACs. Based on these results, we provide a critical comment to the catalyst community: before analyzing the electrocatalytic activity of a DAC, its surface state should be analyzed beforehand.

Electronic structure and optical properties of doped γ-CuI scintillator: a first-principles study

A cuprous iodide (CuI) crystal is considered to be one of the inorganic scintillator materials with the fastest time response, which is expected to play an important role in the field of γ and X rays detection in the future. To improve the detection performance of the CuI scintillator, the effects of element doping on the electronic structure and optical properties of the γ-CuI were investigated by using the first principles calculation method. It was found that Li and Na doping increases the band gap of the γ-CuI scintillator, while Cs, F, Cl, and Br doping decreases the band gap. The optical absorption coefficient of the γ-CuI scintillator is decreased by the Li and Na doping, and the Cs, F, Cl, and Br doping has little effect on the optical absorption coefficient. The effects of the Tl doping on the electronic structure and optical properties of the γ-CuI scintillator depends on its concentration. Based on the changes in the electronic structure and optical properties, we conclude that the Cs, F, Cl, and Br doping might be a good method that can enhance the detection performance of the γ-CuI scintillator.

Element doping can affect the electronic structure and optical properties of γ-CuI. First principles calculations show that Cs, F, Cl, and Br doping may enhance the detection performance of γ-CuI scintillators.

Regulating the scaling relationship for high catalytic kinetics and selectivity of the oxygen reduction reaction

The electrochemical oxygen reduction reaction (ORR) is at the heart of modern sustainable energy technologies. However, the linear scaling relationship of this multistep reaction now becomes the bottleneck for accelerating kinetics. Herein, we propose a strategy of using intermetallic-distance-regulated atomic-scale bimetal assembly (ABA) that can catalyse direct O‒O radical breakage without the formation of redundant *OOH intermediates, which could regulate the inherent linear scaling relationship and cause the ORR on ABA to follow a fast-kinetic dual-sites mechanism. Using in situ synchrotron spectroscopy, we directly observe that a self-adjustable N-bridged Pt = N₂ = Fe assembly promotes the generation of a key intermediate state (Pt‒O‒O‒Fe) during the ORR process, resulting in high reaction kinetics and selectivity. The well-designed Pt = N₂ = Fe ABA catalyst achieves a nearly two orders of magnitude enhanced kinetic current density at the half-wave potential of 0.95 V relative to commercial Pt/C and an almost 99% efficiency of 4-electron pathway selectivity, making it one of the potential ORR catalysts for application to the energy device of zinc‒air cells. This study provides a helpful design principle for developing and optimizing other efficient ORR electrocatalysts.

Improving kinetics for electrochemical oxygen reduction reaction is relevant to important sustainable energy technologies. The authors propose an atomic-scale bimetal assembly consisting Pt and Fe dual sites to regulate the inherent scaling relationship between intermediates for fast kinetics.

Engineering 3d-2p-4f Gradient Orbital Coupling to Enhance Electrocatalytic Oxygen Reduction

The development of highly efficient and economical materials for the oxygen reduction reaction (ORR) plays a key role in practical energy conversion technologies. However, the intrinsic scaling relations exert thermodynamic inhibition on realizing highly active ORR electrocatalysts. Herein, a novel and feasible gradient orbital coupling strategy for tuning the ORR performance through the construction of Co 3d-O 2p-Eu 4f unit sites on the Eu₂ O₃ -Co model is proposed. Through the gradient orbital coupling, the pristine ionic property between Eu and O atoms is assigned with increased covalency, which optimizes the e_g occupancy of Co sites, and weakens the OO bond, thus ultimately breaking the scaling relation between *OOH and *OH at Co-O-Eu unit sites. The optimized model catalyst displays onset and half-wave potential of 1.007 and 0.887 V versus reversible hydrogen electrode, respectively, which are higher than those of commercial Pt/C and most Co-based catalysts ever reported. In addition, the catalyst is found to possess superior selectivity and durability. It also reveals better cell performance than commercial noble-metal catalysts in Zn-air batteries in terms of high power/energy densities and long cycle life. This study provides a new perspective for electronic modulation strategy by the construction of gradient 3d-2p-4f orbital coupling.

Deciphering the Space Charge Effect of the p-n Junction between Copper Sulfides and Molybdenum Selenides for Efficient Water Electrolysis in a Wide pH Range

Space charge transfer is crucial for an efficient electrocatalytic process, especially for narrow-band-gap metal sulfides/selenides. Herein, we designed and synthesized a core-shell structure which is an ultrathin MoSe₂ nanosheet coated CuS hollow nanoboxes (CuS@MoSe₂) to form an open p-n junction structure. The space charge effect in the p-n junction region will greatly improve electron mass transfer and conduction, and also have abundant active interfaces. It was used as a bifunctional electrocatalyst for water oxidation at a wide pH range. It exhibits a low overpotential of 49 mV for the HER and 236 mV for the OER at a current density of 10 mA·cm^-2 in acidic pH, 72 mV for the HER and 219 mV at 10 mA·cm^-2 for the OER in alkaline pH, and 62 mV for the HER and 230 mV at 10 mA·cm^-2 for the OER under neutral conditions. The experimental results and density functional theory calculations testify that the p-n junction in CuS@MoSe₂ designed and synthesized has a strong space charge region with a synergistic effect. The built-in field can boost the electron transport during the electrocatalytic process and can stabilize the charged active center of the p-n junction. This will be beneficial to improve the electrocatalytic performance. This work provides the understanding of semiconductor heterojunction applications and regulating the electronic structure of active sites.

Pauling-type adsorption of O2 induced electrocatalytic singlet oxygen production on N-CuO for organic pollutants degradation

Due to environmentally friendly operation and on-site productivity, electrocatalytic singlet oxygen (¹O₂) production via O₂ gas is of immense interest in environment purification. However, the side-on configuration of O₂ on the catalysts surface will lead to the formation of H₂O, which seriously limits the selectivity and activity of ¹O₂ production. Herein, we show a robust N-doped CuO (N–CuO) with Pauling-type (end-on) adsorption of O₂ at the N–Cu–O₃ sites for the selective generation of ¹O₂ under direct-current electric field. We propose that Pauling-type configuration of O₂ not only lowers the overall activation energy barrier, but also alters the reaction pathway to form ¹O₂ instead of H₂O, which is the key feature determining selectivity for the dissociation of Cu–O bonds rather than the O–O bonds. The proposed N dopant strategy is applicable to a series of transition metal oxides, providing a universal electrocatalysts design scheme for existing high-performance electrocatalytic ¹O₂ production.

Side-on configuration of O₂ on the catalysts conventionally leads to reduction of O₂ to water. Here, the authors propose a nitrogen doping strategy with Pauling-type adsorption of O₂ for selective electrocatalytic singlet oxygen production.

Enhanced Activity of Oxygen Reduction Reaction on Pr6O11-Assisted PtPr Alloy Electrocatalysts

Pt-based alloy catalysts for oxygen reduction reaction (ORR) with outstanding performance have been well-studied in recent years. Among these, Pt-lanthanide alloy catalysts have been developed with quite a competitive ORR activity. However, to promote practical applications of a proton-exchange membrane fuel cell (PEMFC), catalysts with superior activity are still being explored. Herein, we present the Pr₆O₁₁-assisted Pt-Pr catalyst exhibiting further improved ORR activity than the state-of-the-art Pt/C. A simple annealing treatment is applied after the synthesis of the Pt-Pr alloy, obtaining Pr₆O₁₁ nanoparticles attached to the surface of the Pt-Pr alloy to form a Pt-Pr/Pr₆O₁₁ composite catalyst. Experimental and theoretical studies reveal that the electronic state of Pt in the Pt-Pr/Pr₆O₁₁ system is modified. It was found that the strong oxophilicity of Pr adjusts the active site of Pt and promotes the adsorption and dissociation of O₂. The preeminent intrinsic ORR activity on the Pt-Pr/Pr₆O₁₁ catalyst reaches the promoted specific activity (2.01 mA cm^-2) and mass activity (1.3 A mg_Pt^-1), which were 5.91- and 5.90-fold higher than those obtained by the state-of-the-art Pt/C catalyst (0.34 mA cm^-2 and 0.22 A mg_Pt^-1). This study provides us with an idea that the ORR performance of Pt-based alloy could be enhanced with the assistance of the metal oxide phase.

Materials Research Directions Toward a Green Hydrogen Economy: A Review

A constellation of technologies has been researched with an eye toward enabling a hydrogen economy. Within the research fields of hydrogen production, storage, and utilization in fuel cells, various classes of materials have been developed that target higher efficiencies and utility. This Review examines recent progress in these research fields from the years 2011-2021, exploring the most commonly occurring concepts and the materials directions important to each field. Particular attention has been given to catalyst materials that enable the green production of hydrogen from water, chemical and physical storage systems, and materials used in technical capacities within fuel cells. The quantification of publication and materials trends provides a picture of the current state of development within each node of the hydrogen economy.