Ancestral L-amino acid oxidases for deracemization and stereoinversion of amino acids

Engineering an Ancestral Glycosyltransferase for Biosynthesis of 2-Phenylethyl-β-d-Glucopyranoside and Salidroside

Phenylethanoid glycosides (PhGs) are naturally occurring glycosides derived from plants with various biological activities. Glycosyltransferases catalyze the production of PhGs from phenylethanols via a transglycosylation reaction. The low activity and stability of glycosyltransferase limit its industrial application. An ancestral glycosyltransferase, UGTAn85, with heat resistance, alkali resistance, and high stability was resurrected using ancestral sequence reconstruction technology. This enzyme can efficiently convert phenylethanols to PhGs. The optimal reaction temperature and pH for UGTAn85 were found to be 70 °C and pH 10.0, respectively. This study employed a combination of structure-guided rational design and co-evolution analysis to enhance its catalytic activity. Potential mutation sites were identified through computer-aided design, including homology modeling, molecular docking, Rosetta dock design, molecular dynamics simulation, and co-evolution analysis. By targeted mutagenesis, the UGTAn85 mutant Q23E/N65D exhibited a 2.2-fold increase in enzyme activity (11.85 U/mg) and elevated affinity (Km = 0.11 mM) for 2-phenylethanol compared to UGTAn85. Following a fed-batch reaction, 36.16 g/L 2-phenylethyl-β-d-glucopyranoside and 51.49 g/L salidroside could be produced within 24 h, respectively. The findings in this study provide a new perspective on enhancing the stability and activity of glycosyltransferases, as well as a potential biocatalyst for the industrial production of PhGs.

Crystal structure and enzyme engineering of the broad substrate spectrum l-amino acid oxidase 4 from the fungus Hebeloma cylindrosporum

l-Amino acid oxidases (LAAOs) catalyze the oxidative deamination of l-amino acids to α-keto acids. Recombinant production of LAAOs with broad substrate spectrum remains a formidable challenge. We previously achieved this for the highly active and thermostable LAAO4 of Hebeloma cylindrosporum (HcLAAO4). Here, we crystallized a proteolytically truncated surface entropy reduction variant of HcLAAO4 and solved its structure in substrate-free form and in complex with diverse substrates. The ability to support the aliphatic portion of a substrate's side chain by an overall hydrophobic active site is responsible for the broad substrate spectrum of HcLAAO4, including l-amino acids with big aromatic, acidic and basic side chains. Based on the structural findings, we generated an E288H variant with increased activity toward pharmaceutical building blocks of high interest.

Enantioselective Carbon Isotope Exchange

The synthesis of isotopically labeled organic molecules is vital for drug and agrochemical discovery and development. Carbon isotope exchange is emerging as a leading method to generate carbon-labeled targets, which are sought over hydrogen-based labels due to their enhanced stability in biological systems. While many bioactive small molecules bear carbon-containing stereocenters, direct enantioselective carbon isotope exchange reactions have not been established. We describe the first example of an enantioselective carbon isotope exchange reaction, where (radio)labeled α-amino acids can be generated from their unlabeled precursors using a stoichiometric chiral aldehyde receptor with isotopically labeled CO2 followed by imine hydrolysis. Many proteinogenic and non-natural derivatives undergo enantioselective labeling, including the late-stage radiolabeling of complex drug targets.

Enzymatic synthesis of mono- and trifluorinated alanine enantiomers expands the scope of fluorine biocatalysis

Fluorinated amino acids serve as an entry point for establishing new-to-Nature chemistries in biological systems, and novel methods are needed for the selective synthesis of these building blocks. In this study, we focused on the enzymatic synthesis of fluorinated alanine enantiomers to expand fluorine biocatalysis. The alanine dehydrogenase from Vibrio proteolyticus and the diaminopimelate dehydrogenase from Symbiobacterium thermophilum were selected for in vitro production of (R)-3-fluoroalanine and (S)-3-fluoroalanine, respectively, using 3-fluoropyruvate as the substrate. Additionally, we discovered that an alanine racemase from Streptomyces lavendulae, originally selected for setting an alternative enzymatic cascade leading to the production of these non-canonical amino acids, had an unprecedented catalytic efficiency in β-elimination of fluorine from the monosubstituted fluoroalanine. The in vitro enzymatic cascade based on the dehydrogenases of V. proteolyticus and S. thermophilum included a cofactor recycling system, whereby a formate dehydrogenase from Pseudomonas sp. 101 (either native or engineered) coupled formate oxidation to NAD(P)H formation. Under these conditions, the reaction yields for (R)-3-fluoroalanine and (S)-3-fluoroalanine reached >85% on the fluorinated substrate and proceeded with complete enantiomeric excess. The selected dehydrogenases also catalyzed the conversion of trifluoropyruvate into trifluorinated alanine as a first-case example of fluorine biocatalysis with amino acids carrying a trifluoromethyl group.

Development of an Enzyme Cascade System for the Synthesis of Enantiomerically Pure D-Amino Acids Utilizing Ancestral L-Amino Acid Oxidase

Enantiomerically pure D-amino acids hold significant potential as precursors for synthesizing various fine chemicals, including peptide-based drugs and other pharmaceuticals. This study focuses on establishing an enzymatic cascade system capable of converting various L-amino acids into their D-isomers. The system integrates four enzymes: ancestral L-amino acid oxidase (AncLAAO-N4), D-amino acid dehydrogenase (DAADH), D-glucose dehydrogenase (GDH), and catalase. AncLAAO-N4 initiates the process by converting L-amino acids to corresponding keto acids, which are then stereo-selectively aminated to D-amino acids by DAADH using NADPH and NH4Cl. Concurrently, any generated H2O2 is decomposed into O2 and H2O by catalase, while GDH regenerates NADPH from D-glucose. Optimization of reaction conditions and substrate concentrations enabled the successful synthesis of five D-amino acids, including a D-Phe derivative, three D-Trp derivatives, and D-phenylglycine, all with high enantiopurity (>99 % ee) at a preparative scale (>100 mg). This system demonstrates a versatile approach for producing a diverse array of D-amino acids.

Recent advances in structure-based enzyme engineering for functional reconstruction

Structural information can help engineer enzymes. Usually, specific amino acids in particular regions are targeted for functional reconstruction to enhance the catalytic performance, including activity, stereoselectivity, and thermostability. Appropriate selection of target sites is the key to structure-based design, which requires elucidation of the structure-function relationships. Here, we summarize the mutations of residues in different specific regions, including active center, access tunnels, and flexible loops, on fine-tuning the catalytic performance of enzymes, and discuss the effects of altering the local structural environment on the functions. In addition, we keep up with the recent progress of structure-based approaches for enzyme engineering, aiming to provide some guidance on how to take advantage of the structural information.

Ancestral l-amino acid oxidase: From substrate scope exploration to phenylalanine ammonia-lyase assay

In this study we assessed the applicability of the recently reported ancestral l-amino acid oxidase (AncLAAO), for the development of an enzyme-coupled phenylalanine ammonia-lyase (PAL) activity assay. Firstly, the expression and isolation of the AncLAAO-N1 was optimized, followed by activity tests of the obtained octameric N-terminal His-tagged enzyme towards various phenylalanine analogues to assess the compatibility of its substrate scope with that of the well-characterized PALs. AncLAAO-N1 showed high catalytic efficiency towards phenylalanines mono-, di-, or multiple-substituted in the meta- or para-positions, with ortho- substituted substrates being poorly transformed, these results highlighting the significant overlap between its substrate scope and those of PALs. After successful set-up of the AncLAAO-PAL coupled solid phase assay, in a 'proof of concept' approach we demonstrated its applicability for the high-throughput activity screens of PAL-libraries, by screening the saturation mutagenesis-derived I460NNK variant library of PAL from Petroselinum crispum, using p-MeO-phenylalanine as model substrate. Notably, the hits revealed by the coupled assay comprised all the active PAL variants: I460V, I460T, I460S, I460L, previously identified from the tested PAL-library by other assays. Our results validate the applicability of AncLAAO for coupled enzyme systems with phenylalanine ammonia-lyases, including cell-based assays suitable for the high-throughput screening of directed evolution-derived PAL-libraries.

Structural and functional analysis of hyper-thermostable ancestral L-amino acid oxidase that can convert Trp derivatives to D-forms by chemoenzymatic reaction

Production of D-amino acids (D-AAs) on a large-scale enables to provide precursors of peptide therapeutics. In this study, we designed a novel L-amino acid oxidase, HTAncLAAO2, by ancestral sequence reconstruction, exhibiting high thermostability and long-term stability. The crystal structure of HTAncLAAO2 was determined at 2.2 Å by X-ray crystallography, revealing that the enzyme has an octameric form like a "ninja-star" feature. Enzymatic property analysis demonstrated that HTAncLAAO2 exhibits three-order larger kcat/Km values towards four L-AAs (L-Phe, L-Leu, L-Met, and L-Ile) than that of L-Trp. Through screening the variants, we obtained the HTAncLAAO2(W220A) variant, which shows a > 6-fold increase in kcat value toward L-Trp compared to the original enzyme. This variant applies to synthesizing enantio-pure D-Trp derivatives from L- or rac-forms at a preparative scale. Given its excellent properties, HTAncLAAO2 would be a starting point for designing novel oxidases with high activity toward various amines and AAs.

Action mechanism of snake venom l-amino acid oxidase and its double-edged sword effect on cancer treatment: Role of pannexin 1-mediated interleukin-6 expression

Snake venom l-amino acid oxidases (svLAAOs) have been recognized as promising candidates for anticancer therapeutics. However, multiple aspects of their catalytic mechanism and the overall responses of cancer cells to these redox enzymes remain ambiguous. Here, we present an analysis of the phylogenetic relationships and active site-related residues among svLAAOs and reveal that the previously proposed critical catalytic residue His 223 is highly conserved in the viperid but not the elapid svLAAO clade. To gain further insight into the action mechanism of the elapid svLAAOs, we purify and characterize the structural, biochemical, and anticancer therapeutic potentials of the Thailand elapid snake Naja kaouthia LAAO (NK-LAAO). We find that NK-LAAO, with Ser 223, exhibits high catalytic activity toward hydrophobic l-amino acid substrates. Moreover, NK-LAAO induces substantial oxidative stress-mediated cytotoxicity with the magnitude relying on both the levels of extracellular hydrogen peroxide (H2O2) and intracellular reactive oxygen species (ROS) generated during the enzymatic redox reactions, but not being influenced by the N-linked glycans on its surface. Unexpectedly, we discover a tolerant mechanism deployed by cancer cells to dampen the anticancer activities of NK-LAAO. NK-LAAO treatment amplifies interleukin (IL)-6 expression via the pannexin 1 (Panx1)-directed intracellular calcium (iCa2+) signaling pathway to confer adaptive and aggressive phenotypes on cancer cells. Accordingly, IL-6 silencing renders cancer cells vulnerable to NK-LAAO-induced oxidative stress together with abrogating NK-LAAO-stimulated metastatic acquisition. Collectively, our study urges caution when using svLAAOs in cancer treatment and identifies the Panx1/iCa2+/IL-6 axis as a therapeutic target for improving the effectiveness of svLAAOs-based anticancer therapies.

Efficient Exploration of Sequence Space by Sequence-Guided Protein Engineering and Design

The rapid growth of sequence databases over the past two decades means that protein engineers faced with optimizing a protein for any given task will often have immediate access to a vast number of related protein sequences. These sequences encode information about the evolutionary history of the protein and the underlying sequence requirements to produce folded, stable, and functional protein variants. Methods that can take advantage of this information are an increasingly important part of the protein engineering tool kit. In this Perspective, we discuss the utility of sequence data in protein engineering and design, focusing on recent advances in three main areas: the use of ancestral sequence reconstruction as an engineering tool to generate thermostable and multifunctional proteins, the use of sequence data to guide engineering of multipoint mutants by structure-based computational protein design, and the use of unlabeled sequence data for unsupervised and semisupervised machine learning, allowing the generation of diverse and functional protein sequences in unexplored regions of sequence space. Altogether, these methods enable the rapid exploration of sequence space within regions enriched with functional proteins and therefore have great potential for accelerating the engineering of stable, functional, and diverse proteins for industrial and biomedical applications.

Ammonia Production Using Bacteria and Yeast toward a Sustainable Society

Ammonia is an important chemical that is widely used in fertilizer applications as well as in the steel, chemical, textile, and pharmaceutical industries, which has attracted attention as a potential fuel. Thus, approaches to achieve sustainable ammonia production have attracted considerable attention. In particular, biological approaches are important for achieving a sustainable society because they can produce ammonia under mild conditions with minimal environmental impact compared with chemical methods. For example, nitrogen fixation by nitrogenase in heterogeneous hosts and ammonia production from food waste using microorganisms have been developed. In addition, crop production using nitrogen-fixing bacteria has been considered as a potential approach to achieving a sustainable ammonia economy. This review describes previous research on biological ammonia production and provides insights into achieving a sustainable society.

Reaction Mechanism of Ancestral l-Lys α-Oxidase from Caulobacter Species Studied by Biochemical, Structural, and Computational Analysis

The flavin-dependent amine oxidase superfamily contains various l-amino acid oxidases (LAAOs) bearing different substrate specificities and enzymatic properties. LAAOs catalyze the oxidation of the α-amino group of l-amino acids (L-AAs) to produce imino acids and H2O2. In this study, an ancestral l-Lys α-oxidase (AncLLysO2) was designed utilizing genome-mined sequences from the Caulobacter species. The AncLLysO2 exhibited high specificity toward l-Lys; the k cat/K m values toward l-Lys were one and two orders larger than those of l-Arg and l-ornithine, respectively. Liquid chromatography-high resolution mass spectrometry analysis indicated that AncLLysO2 released imino acid immediately from the active site after completion of oxidation of the α-amino group. Crystal structures of the ligand-free, l-Lys- and l-Arg-bound forms of AncLLysO2 were determined at 1.4-1.6 Å resolution, indicating that the active site of AncLLysO2 kept an open state during the reaction and more likely to release products. The structures also indicated the substrate recognition mechanism of AncLLysO2; ε-amino, α-amino, and carboxyl groups of l-Lys formed interactions with Q357, A551, and R77, respectively. Biochemical and molecular dynamics simulation analysis of AncLLysO2 indicated that active site residues that indirectly interact with the substrate are also important to exhibit high activity; for example, the aromatic group of Y219 is important to ensure that the l-Lys substrate is placed in the correct position to allow the reaction to proceed efficiently. Taken together, we propose the reaction mechanism of AncLLysO2.

Engineering functional thermostable proteins using ancestral sequence reconstruction

Natural proteins are often only slightly more stable in the native state than the denatured state, and an increase in environmental temperature can easily shift the balance toward unfolding. Therefore, the engineering of proteins to improve protein stability is an area of intensive research. Thermostable proteins are required to withstand industrial process conditions, for increased shelf-life of protein therapeutics, for developing robust 'biobricks' for synthetic biology applications, and for research purposes (e.g., structure determination). In addition, thermostability buffers the often destabilizing effects of mutations introduced to improve other properties. Rational design approaches to engineering thermostability require structural information, but even with advanced computational methods, it is challenging to predict or parameterize all the relevant structural factors with sufficient precision to anticipate the results of a given mutation. Directed evolution is an alternative when structures are unavailable but requires extensive screening of mutant libraries. Recently, however, bioinspired approaches based on phylogenetic analyses have shown great promise. Leveraging the rapid expansion in sequence data and bioinformatic tools, ancestral sequence reconstruction can generate highly stable folds for novel applications in industrial chemistry, medicine, and synthetic biology. This review provides an overview of the factors important for successful inference of thermostable proteins by ancestral sequence reconstruction and what it can reveal about the determinants of stability in proteins.

D-Amino Acids and D-Amino Acid-Containing Peptides: Potential Disease Biomarkers and Therapeutic Targets?

In nature, amino acids are found in two forms, L and D enantiomers, except for glycine which does not have a chiral center. The change of one form to the other will lead to a change in the primary structure of proteins and hence may affect the function and biological activity of proteins. Indeed, several D-amino acid-containing peptides (DAACPs) were isolated from patients with cataracts, Alzheimer's and other diseases. Additionally, significant levels of free D-amino acids were found in several diseases, reflecting the disease conditions. Studying the molecular mechanisms of the DAACPs formation and the alteration in D-amino acids metabolism will certainly assist in understanding these diseases and finding new biomarkers and drug targets. In this review, the presence of DAACPs and free D-amino acids and their links with disease development and progress are summarized. Similarly, we highlight some recent advances in analytical techniques that led to improvement in the discovery and analysis of DAACPs and D-amino acids.

Kinetic and Structural Properties of a Robust Bacterial L-Amino Acid Oxidase

L-Amino acid oxidase (LAAO) is a flavin adenine dinucleotide (FAD)-dependent enzyme active on most proteinogenic L-amino acids, catalysing their conversion to α-keto acids by oxidative deamination of the substrate. For this oxidation reaction, molecular oxygen is used as the electron acceptor, generating hydrogen peroxide. LAAO can be used to detect L-amino acids, for the production of hydrogen peroxide as an oxidative agent or antimicrobial agent, and for the production of enantiopure amino acids from racemates. In this work, we characterised a previously reported LAAO from the bacterium Pseudoalteromonas luteoviolacea. The substrate scope and kinetic properties of the enzyme were determined, and the thermostability was evaluated. Additionally, we elucidated the crystal structure of this bacterial LAAO, enabling us to test the role of active site residues concerning their function in catalysis. The obtained insights and ease of expression of this thermostable LAAO provides a solid basis for the development of engineered LAAO variants tuned for biosensing and/or biocatalysis.

Catalytic mechanism of ancestral L-lysine oxidase assigned by sequence data mining

A large number of protein sequences are registered in public databases such as PubMed. Functionally uncharacterized enzymes are included in these databases, some of which likely have potential for industrial applications. However, assignment of the enzymes remained difficult tasks for now. In this study, we assigned a total of 28 original sequences to uncharacterized enzymes in the FAD-dependent oxidase family expressed in some species of bacteria including Chryseobacterium, Flavobacterium, and Pedobactor. Progenitor sequence of the assigned 28 sequences was generated by ancestral sequence reconstruction, and the generated sequence exhibited L-lysine oxidase activity; thus, we named the enzyme AncLLysO. Crystal structures of ligand-free and ligand-bound forms of AncLLysO were determined, indicating that the enzyme recognizes L-Lys by hydrogen bond formation with R76 and E383. The binding of L-Lys to AncLLysO induced dynamic structural change at a plug loop formed by residues 251 to 254. Biochemical assays of AncLLysO variants revealed the functional importance of these substrate recognition residues and the plug loop. R76A and E383D variants were also observed to lose their activity, and the kcat/Km value of G251P and Y253A mutations were approximately 800- to 1800-fold lower than that of AncLLysO, despite the indirect interaction of the substrates with the mutated residues. Taken together, our data demonstrate that combinational approaches to sequence classification from database and ancestral sequence reconstruction may be effective not only to find new enzymes using databases of unknown sequences but also to elucidate their functions.

Analysis of N-glycosylation in fungal l-amino acid oxidases expressed in the methylotrophic yeast Pichia pastoris

l-amino acid oxidases (LAAOs) catalyze the oxidative deamination of l-amino acids to corresponding α-keto acids. Here, we describe the heterologous expression of four fungal LAAOs in Pichia pastoris. cgLAAO1 from Colletotrichum gloeosporioides and ncLAAO1 from Neurospora crassa were able to convert substrates not recognized by recombinant 9His-hcLAAO4 from the fungus Hebeloma cylindrosporum described earlier thereby broadening the substrate spectrum for potential applications. 9His-frLAAO1 from Fibroporia radiculosa and 9His-laLAAO2 from Laccaria amethystine were obtained only in low amounts. All four enzymes were N-glycosylated. We generated mutants of 9His-hcLAAO4 lacking N-glycosylation sites to further understand the effects of N-glycosylation. All four predicted N-glycosylation sites were glycosylated in 9His-hcLAAO4 expressed in P. pastoris. Enzymatic activity was similar for fully glycosylated 9His-hcLAAO4 and variants without one or all N-glycosylation sites after acid activation of all samples. However, activity without acid treatment was low in a variant without N-glycans. This was caused by the absence of a hypermannosylated N-glycan on asparagine residue N54. The lack of one or all of the other N-glycans was without effect. Our results demonstrate that adoption of a more active conformation requires a specific N-glycosylation during biosynthesis.

Partial Consensus Design and Enhancement of Protein Function by Secondary-Structure-Guided Consensus Mutations

Consensus design (CD) is a representative sequence-based protein design method that enables the design of highly functional proteins by analyzing vast amounts of protein sequence data. This study proposes a partial consensus design (PCD) of a protein as a derivative approach of CD. The method replaces the target protein sequence with a consensus sequence in a secondary-structure-dependent manner (i.e., regionally dependent and divided into α-helix, β-sheet, and loop regions). In this study, we generated several artificial partial consensus l-threonine 3-dehydrogenases (PcTDHs) by PCD using the TDH from Cupriavidus necator (CnTDH) as a target protein. Structural and functional analysis of PcTDHs suggested that thermostability would be independently improved when consensus mutations are introduced into the loop region of TDHs. On the other hand, enzyme kinetic parameters (k_cat/K_m) and average productivity would be synergistically enhanced by changing the combination of the mutations-replacement of one region of CnTDH with a consensus sequence provided only negative effects, but the negative effects were nullified when the two regions were replaced simultaneously. Taken together, we propose the hypothesis that there are protein regions that encode individual protein properties, such as thermostability and activity, and that the introduction of consensus mutations into these regions could additively or synergistically modify their functions.

Chemoenzymatic Production of Enantiocomplementary 2-Substituted 3-Hydroxycarboxylic Acids from L-α-Amino Acids

A two-enzyme cascade reaction plus in situ oxidative decarboxylation for the transformation of readily available canonical and non-canonical L-α-amino acids into 2-substituted 3-hydroxy-carboxylic acid derivatives is described. The biocatalytic cascade consisted of an oxidative deamination of L-α-amino acids by an L-α-amino acid deaminase from Cosenzaea myxofaciens, rendering 2-oxoacid intermediates, with an ensuing aldol addition reaction to formaldehyde, catalyzed by metal-dependent (R)- or (S)-selective carboligases namely 2-oxo-3-deoxy-l-rhamnonate aldolase (YfaU) and ketopantoate hydroxymethyltransferase (KPHMT), respectively, furnishing 3-substituted 4-hydroxy-2-oxoacids. The overall substrate conversion was optimized by balancing biocatalyst loading and amino acid and formaldehyde concentrations, yielding 36-98% aldol adduct formation and 91- 98% ee for each enantiomer. Subsequent in situ follow-up chemistry via hydrogen peroxide-driven oxidative decarboxylation afforded the corresponding 2-substituted 3-hydroxycarboxylic acid derivatives.

Ancestral sequence reconstruction for protein engineers

In addition to its value in the study of molecular evolution, ancestral sequence reconstruction (ASR) has emerged as a useful methodology for engineering proteins with enhanced properties. Proteins generated by ASR often exhibit unique or improved activity, stability, and/or promiscuity, all of which are properties that are valued by protein engineers. Comparison between extant proteins and evolutionary intermediates generated by ASR also allows protein engineers to identify substitutions that have contributed to functional innovation or diversification within protein families. As ASR becomes more widely adopted as a protein engineering approach, it is important to understand the applications, limitations, and recent developments of this technique. This review highlights recent exemplifications of ASR, as well as technical aspects of the reconstruction process that are relevant to protein engineering.

Conversion of Racemic Unnatural Amino Acids to Optically Pure Forms by a Coupled Enzymatic Reaction

Genetic code expansion (GCE) technology is a useful tool for the site-specific modification of proteins. An unnatural amino acid (UAA) is one of the essential components of this technique, typically required at high concentration (1 mM or higher) in growth medium. The supply of UAAs is an important limitation to the application of GCE technology, as many UAAs are either expansive or commercially unavailable. In this study, two UAAs in a racemic mixture were converted into optically pure forms using two enzymes, the d-amino acid oxidase (RgDAAO) from Rhodotorula gracilis and the aminotransferase (TtAT) from Thermus thermophilus. In the coupled enzyme system, RgDAAO oxidizes the d-form of UAAs in a stereospecific manner and produces the corresponding α-keto acids, which are then converted into the l-form of UAAs by TtAT, resulting in the quantitative and stereospecific conversion of racemic UAAs to optically pure forms. The genetic incorporation of the optically pure UAAs into a target protein produced a better protein yield than the same experiments using the racemic mixtures of the UAAs. This method could not only be used for the preparation of optically pure UAAs from racemic mixtures, but also the broad substrate specificity of both enzymes would allow for its expansion to structurally diverse UAAs.