Novel nanosomes for gene delivery to Plasmodium falciparum-infected red blood cells

Optimized plasmid loading of human erythrocytes for Plasmodium falciparum DNA transfections

In vitro modification of Plasmodium falciparum genes is the cornerstone of basic and translational malaria research. Achieved through DNA transfection, these modifications may entail altering protein sequence or abundance. Such experiments are critical for defining the molecular mechanisms of key parasite phenotypes and for validation of drug and vaccine targets. Despite its importance, successful transfection remains difficult and is a resource-intensive, rate-limiting step in P. falciparum research. Here, we report that inefficient loading of plasmid into erythrocytes limits transfection efficacy with commonly used electroporation methods. As these methods also require expensive instrumentation and consumables that are not broadly available, we explored a simpler method based on plasmid loading through hypotonic lysis and resealing of erythrocytes. We used parasite expression of a sensitive NanoLuc reporter for rapid evaluation and optimization of each step. Hypotonic buffer composition, resealing buffer volume and composition, and subsequent incubation affected plasmid retention and successful transfection. While ATP was critical for erythrocyte resealing, addition of Ca++ or glutathione did not improve transfection efficiency, with increasing Ca++ concentrations proving detrimental to outcomes. Compared with either the standard electroporation method or a previously reported hypotonic loading protocol, the optimized method yields greater plasmid loading and higher expression of the NanoLuc reporter 48 h after transfection. It also produced significantly faster outgrowth of parasites in transfections utilizing either episomal expression or CRISPR-Cas9 mediated integration. This new method produces higher P. falciparum transfection efficiency, reduces resource requirements and should accelerate molecular studies of malaria drug and vaccine targets.

Nanotechnology Platform for Advancing Vaccine Development against the COVID-19 Virus

The COVID-19 pandemic has had a profound impact on societies, public health, healthcare systems, and the world economy. With over 771 million people infected worldwide and a staggering death toll exceeding 6,960,783 as of 4 October 2023 (according to the World Health Organization), the urgency for a solution was paramount. Since the outbreak, the demand for immediate treatment for COVID-19 viral infection, as well as for effective vaccination against this virus, was soaring, which led scientists, pharmaceutical/biotech companies, government health agencies, etc., to think about a treatment strategy that could control and minimize this outbreak as soon as possible. Vaccination emerged as the most effective strategy to combat this infectious disease. For vaccination strategies, any conventional vaccine approach using attenuated live or inactivated/engineered virus, as well as other approaches, typically requires years of research and assessment. However, the urgency of the situation promoted a faster and more effective approach to vaccine development against COVID-19. The role of nanotechnology in designing, manufacturing, boosting, and delivering vaccines to the host to counter this virus was unquestionably valued and assessed. Several nanoformulations are discussed here in terms of their composition, physical properties, credibility, and applications in past vaccine development (as well as the possibility of using those used in previous applications for the generation of the COVID-19 vaccine). Controlling and eliminating the spread of the virus and preventing future recurrence requires a safe, tolerable, and effective vaccine strategy. In this review, we discuss the potential of nanoformulations as the basis for an effective vaccine strategy against COVID-19.

A Fast-Track Phenotypic Characterization of Plasmodium falciparum Vaccine Antigens through Lyse-Reseal Erythrocytes Mediated Delivery (LyRED) of RNA Interference for Targeted Translational Repression

The minimal success of the malaria vaccine with available antigens indicates the need for intensive and accelerated research to identify and characterize new antigens that confer protection against infection, clinical manifestation, and even malaria transmission. Further, the genetic manipulation tools to characterize such antigens are very time-consuming and laborious due to the very low efficiency of transfection in the malaria parasite. Here, we report a human miRNA-mediated translational repression of antigens in Plasmodium falciparum as a fast-track method for understanding and validating their function. In this method, candidate miRNAs are designed based on favorable hybridization energy against a parasite gene, and miRNA mimics are delivered to the parasite by loading them as cargo in the erythrocytes by simple lyse-reseal method. Incubation of the miRNA loaded erythrocytes with purified mature trophozoites or schizonts results in the loaded erythrocytes' infection. The miRNA mimics are translocated to parasites, and the effect of miRNA-mediated translation repression can be monitored within 48-72 h post-invasion. Unlike other transfection based methods, this method is fast, reproducible, and robust. We call this method as lyse-reseal erythrocytes for delivery (LyRED) of miRNA, which is a rapid and straight-forward method providing an efficient alternative to the existing genetic tools for P. falciparum to characterize the function of antigens or genes. The identification of crucial antigens from the different stages of the Plasmodium falciparum life cycle by the miRNA targeting approach can fuel the development of efficacious subunit vaccines against malaria.

Aptamer-functionalized Hybrid Nanoparticles to Enhance the Delivery of Doxorubicin into Breast Cancer Cells by Silencing P-glycoprotein

OBJECTIVE

The MDR of metastatic breast cancer cells is accompanied by the overexpression of P-gp transporter. This study has been focused to determine whether silencing the expression of P-gp by aptamer-labeled siRNA nanoparticles could enhance the delivery of doxorubicin into breast cancer cells in culture.

METHODOLOGY

The nanoparticle F-31 was prepared using DOTAP, cholesterol, and PLGA, and then incorporating Mal-PEG to facilitate aptamer-binding. The nanoparticles were surface-functionalized with aptamer A6, which targets Her-2 receptors overexpressed on the surface of breast cancer cells.

RESULTS

This study has shown that the uptake of Dox by Dox-resistant 4T1-R is significantly less than Dox-sensitive 4T1-S which is partly attributed to the higher expression of drug-efflux pump P-gp on the surface of the resistant cells. The targeted knockdown of P-gp has been enhanced when the particles carrying P-gp siRNA was labeled with aptamer. Concurrently, the uptake of Dox into the Dox-resistant 4T1-R breast cancer cells has increased significantly when the P-gp was silenced by P-gp siRNA-encapsulated aptamer-labeled nanoparticles.

CONCLUSIONS

This preliminary study concludes that downregulating P-gp expression by targeted delivery of P-gp siRNA using aptamer-labeled lipid-based hybrid nanoparticles could effectively increase the intracellular trafficking of doxorubicin in Dox-resistant mouse breast cancer cells.

Lyse-Reseal Erythrocytes for Transfection of Plasmodium falciparum

Simple and efficient transfection methods for genetic manipulation of Plasmodium falciparum are desirable to identify, characterize and validate the genes with therapeutic potential and better understand parasite biology. Among the available transfection techniques for P. falciparum, electroporation-based methods, particularly electroporation of ring-infected RBCs is routinely used. Nonetheless, transfection of P. falciparum remains a resource-intensive procedure. Here, we report a simple and economic transfection method for P. falciparum, which is termed as the lyse-reseal erythrocytes for transfection (LyRET). It involved lysis of erythrocytes with a hypotonic RBC lysis buffer containing the desired plasmid DNA, followed by resealing by adding a high salt buffer. These DNA-encapsulated lyse-reseal erythrocytes were mixed with P. falciparum trophozoite/schizont stages and subjected to selection for the plasmid-encoded drug resistance. In parallel, transfections were also done by the methods utilizing electroporation of DNA into uninfected RBCs and parasite-infected RBCs. The LyRET method successfully transfected 3D7 and D10 strains with different plasmids in 63 of the 65 attempts, with success rate similar to transfection by electroporation of DNA into infected RBCs. The cost effectiveness and comparable efficiency of LyRET method makes it an alternative to the existing transfection methods for P. falciparum, particularly in resource-limited settings.

Novel siRNA formulation to effectively knockdown mutant p53 in osteosarcoma

Objectives

The tumor suppressor p53 plays a crucial role in the development of osteosarcoma. The primary objective of this study is to develop and optimize lipid based nanoparticle formulations that can carry siRNA and effectively silence mutant p53 in 318–1, a murine osteosarcoma cell line.

Methods

The nanoparticles were composed of a mixture of two lipids (cholesterol and DOTAP) and either PLGA or PLGA-PEG and prepared by using an EmulsiFlex-B3 high pressure homogenizer. A series of studies that include using different nanoparticles, different amount of siRNAs, cell numbers, incubation time, transfection media volume, and storage temperature was performed to optimize the gene silencing efficiency.

Key findings

Replacement of lipids by PLGA or PLGA-PEG decreased the particle size and overall cytotoxicity. Among all lipid-polymer nanoformulations, nanoparticles with 10% PLGA showed highest mutant p53 knockdown efficiency while maintaining higher cell viability when a nanoparticle to siRNA ratio equal to 6.8:0.66 and 75 nM siRNA was used. With long term storage the mutant p53 knockdown efficiency decreased to a greater extent.

Conclusions

This study warrants a future evaluation of this formulation for gene silencing efficiency of mutant p53 in tissue culture and animal models for the treatment of osteosarcoma.

Aptamer-functionalized hybrid nanoparticle for the treatment of breast cancer

PURPOSE

Resistance to chemotherapeutic agents such as doxorubicin is a major reason for cancer treatment failure. At present the treatment option for metastatic breast cancer is very poor. Therefore, development of an effective therapeutic strategy to circumvent MDR of metastatic breast cancer is highly anticipated. The MDR of metastatic breast cancer cells was accompanied with the overexpression of P-gp transporter. Even though the overexpression of P-gp could be minimized by silencing with siRNA, the question is how they can be selectively targeted to the cancer cells. We propose that aptamer surface labeling of the nanoparticles could enhance the selectively delivery of p-gp siRNA into the metastatic breast cancer cells. Our hypothesis is that conjugating nanoparticles with a cancer cell specific aptamer should allow selective delivery of therapeutic drugs to tumor cells leading to enhanced cellular toxicity and antitumor effect as compared to unconjugated nanoparticles. The primary objective of this study is to develop a targeted nanocarrier delivery system for siRNA into breast cancer cells.

DESIGN METHODS

For targeted delivery, Aptamer A6 has been used which can bind to Her-2 receptors on breast cancer cells. For aptamer binding to particle surface, maleimide-terminated PEG-DSPE (Mal-PEG) was incorporated into the nanoparticles. Initially, three blank hybrid nanoparticles (i.e. F21, F31, and F40) out of nine different formulations prepared by high pressure homogenization (HPH) using different amount of DOTAP, cholesterol, PLGA or PLGA-PEG and Mal-PEG were chosen. Then protamine sulfate-condensed GAPDH siRNA (TRITC conjugated; red) or P-gp siRNA was encapsulated into those nanoparticles. Finally, the particles were incubated with aptamer A6 (FITC conjugated; green) for surface labeling.

RESULTS

Aptamer labeled-nanoparticles having PLGA are smaller in size than those having PLGA-PEG. Surface charge was reduced when the particles were labeled with aptamer. Cell transfection was increased significantly in Her-2 (+) SKBR-3 and 4T1-R cells but not in Her-2 poorly expressed MDA MB-231 and MCF-7 cells. The knockdown of P-gp was increased significantly when the particles were labeled with aptamer. No significant cellular toxicity was observed for any of these formulations.

CONCLUSION

This preliminary study concludes that aptamer-functionalized hybrid nanoparticles could be used to deliver P-gp targeted siRNA into the breast cancer cells to overcome chemoresistance.

Emancipating Chlamydia: Advances in the Genetic Manipulation of a Recalcitrant Intracellular Pathogen

Chlamydia species infect millions of individuals worldwide and are important etiological agents of sexually transmitted disease, infertility, and blinding trachoma. Historically, the genetic intractability of this intracellular pathogen has hindered the molecular dissection of virulence factors contributing to its pathogenesis. The obligate intracellular life cycle of Chlamydia and restrictions on the use of antibiotics as selectable markers have impeded the development of molecular tools to genetically manipulate these pathogens. However, recent developments in the field have resulted in significant gains in our ability to alter the genome of Chlamydia, which will expedite the elucidation of virulence mechanisms. In this review, we discuss the challenges affecting the development of molecular genetic tools for Chlamydia and the work that laid the foundation for recent advancements in the genetic analysis of this recalcitrant pathogen.

DNA repair mechanisms and their biological roles in the malaria parasite Plasmodium falciparum

Research into the complex genetic underpinnings of the malaria parasite Plasmodium falciparum is entering a new era with the arrival of site-specific genome engineering. Previously restricted only to model systems but now expanded to most laboratory organisms, and even to humans for experimental gene therapy studies, this technology allows researchers to rapidly generate previously unattainable genetic modifications. This technological advance is dependent on DNA double-strand break repair (DSBR), specifically homologous recombination in the case of Plasmodium. Our understanding of DSBR in malaria parasites, however, is based largely on assumptions and knowledge taken from other model systems, which do not always hold true in Plasmodium. Here we describe the causes of double-strand breaks, the mechanisms of DSBR, and the differences between model systems and P. falciparum. These mechanisms drive basic parasite functions, such as meiosis, antigen diversification, and copy number variation, and allow the parasite to continually evolve in the contexts of host immune pressure and drug selection. Finally, we discuss the new technologies that leverage DSBR mechanisms to accelerate genetic investigations into this global infectious pathogen.

From the genome to the phenome: tools to understand the basic biology of Plasmodium falciparum

Malaria plagues one out of every 30 humans and contributes to almost a million deaths, and the problem could worsen. Our current therapeutic options are compromised by emerging resistance by the parasite to our front line drugs. It is thus imperative to better understand the basic biology of the parasite and develop novel drugs to stem this disease. The most facile approach to analyse a gene's function is to remove it from the genome or inhibit its activity. Although genetic manipulation of the human malaria parasite Plasmodium falciparum is a relatively standard procedure, there is no optimal method to perturb genes essential to the intraerythrocytic development cycle--the part of the life cycle that produces the clinical manifestation of malaria. This is a severe impediment to progress because the phenotype we wish to study is exactly the one that is so elusive. In the absence of any utilitarian way to conditionally delete essential genes, we are prevented from investigating the parasite's most vulnerable points. This review aims to focus on the development of tools identifying essential genes of P. falciparum and our ability to elicit phenotypic mutation.

The impact of non-electrical factors on electrical gene transfer

Electrical pulses directly and effectively boost both in vitro and in vivo gene transfer, but this process is greatly affected by non-electrical factors that exist during electroporation. These factors include, but are not limited to, the types of cells or tissues used, property of DNA, DNA formulation, and expressed protein. In this mini-review, we only describe and discuss a summary of DNA properties and selected DNA formulations on gene transfer via electroporation. The properties of DNA were selected for review because a substantial amount of remarkable work has been performed during the past few years but has received less notice than other works, although DNA properties appear to be critical for boosting electroporation delivery. The selected formulations will be covered in this mini-review because we are only interested in the simple formulations that could be used for cell or gene therapy via electroporation. Plus, there was an extensive review of DNA formulations in the first edition of this book. The formulations discussed in this mini-review represent novel developments in recent years and may impact electroporation significantly. These advancements in DNA formulations could prove to be important for gene delivery and disease treatment.